]> git.sur5r.net Git - u-boot/shortlog
u-boot
2015-10-27 Jagan Tekispi: designware_spi: Use BIT macro
2015-10-27 Jagan Tekispi: cadence_qspi_apb: Use BIT macro
2015-10-27 Jagan Tekispi: bfin_spi6xx: Use BIT macro
2015-10-27 Jagan Tekispi: atmel_spi: Use BIT macro
2015-10-27 Jagan Tekispi: zynq_[q]spi: Use GENMASK macro
2015-10-27 Jagan Tekispi: zynq_[q]spi: Use BIT macro
2015-10-25 Jagan Tekispi: zynq_qspi: Minor cleanups
2015-10-25 Jagan Tekisf: Add FSR support to spi_flash_cmd_wait_ready
2015-10-25 Jagan Tekisf: Update status reg check in spi_flash_cmd_wait_ready
2015-10-25 Jagan Tekisf: Make flash->flags use for generic usage
2015-10-25 Jagan Tekisf: Optimize BAR write code
2015-10-25 Jagan Tekisf: Add spi_flash_read_bar
2015-10-25 Jagan Tekisf: Return bank_sel, if flash->bank_curr == bank_sel
2015-10-25 Jagan Tekispi: zynq_spi: Remove unneeded headers
2015-10-25 Siva Durga... zynq-common: Add SPL SPI offset, size configs
2015-10-25 Jagan Tekispi: zynq_qspi: Fix to configure CPOL, CPHA mask
2015-10-25 Jagan Tekizynq-common: Enable ISSI SPI-NOR flash support
2015-10-25 Jagan Tekisf: params: Add IS25LP128 part support
2015-10-25 Jagan Tekisf: params: Add IS25LP064 part support
2015-10-25 Jagan Tekisf: params: Add IS25LP032 part support
2015-10-25 Jagan Tekispi: zynq_spi: Store cs value into private data
2015-10-25 Jagan Tekispi: zynq_spi: Rename baudrate divisor mask name
2015-10-25 Jagan Tekispi: zynq_spi: Add config reg shift named macros
2015-10-25 Jagan Tekispi: Kconfig: Add Zynq QSPI controller entry
2015-10-25 Jagan Tekiconfigs: zynq: Enable zynq qspi controller
2015-10-25 Jagan Tekizynq-common: Enable Bank/Extended address register...
2015-10-25 Jagan Tekizynq-common: Enable zynq qspi controller support
2015-10-25 Jagan Tekiconfigs: Enable legacy SPI flash interface support
2015-10-25 Jagan Tekidts: zed: Enable zynq qspi controller node
2015-10-25 Jagan Tekidts: zc770-xm010: Enable zynq qspi controller node
2015-10-25 Jagan Tekidts: zc706: Enable zynq qspi controller node
2015-10-25 Jagan Tekidts: zc702: Enable zynq qspi controller node
2015-10-25 Jagan Tekidts: microzed: Enable zynq qspi controller node
2015-10-25 Jagan Tekidoc: device-tree-bindings: spi: Add zynq qspi info
2015-10-25 Jagan Tekidts: zynq: Add zynq qspi controller nodes
2015-10-25 Jagan Tekispi: Add zynq qspi controller driver
2015-10-24 Gong Qianyucommon/board_f.c: modify the macro to use get_clocks...
2015-10-24 Masahiro Yamadaarm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 Simon GlassRevert "ARM: zynq: disable CONFIG_SYS_MALLOC_F to fix...
2015-10-24 Simon Glasszynq: Move SPL console init out of board_init_f()
2015-10-24 Simon Glassmicroblaze: Add a TODO to call board_init_f_mem()
2015-10-24 Simon Glassarm: Switch 32-bit ARM to using generic global_data...
2015-10-24 Simon Glassarm: Switch aarch64 to using generic global_data setup
2015-10-24 Simon Glassboard_init_f_mem(): Don't create an unused early malloc...
2015-10-24 Simon Glassboard_init_f_mem(): Don't require memset()
2015-10-24 Simon GlassMove board_init_f_mem() into a common location
2015-10-24 Stephen Warrenfs-test.sh: fix pre-requisite detection
2015-10-24 Stephen Warrentest: fat: add test of non-contiguous file reads
2015-10-24 Stephen Warrenitest: make memory access work under sandbox
2015-10-24 Roy Splietdistro_bootcmd: Add support for booting from ubifs
2015-10-24 Hans de Goedeubifs: Add generic fs support
2015-10-24 Hans de Goedeubifs: Add functions for generic fs use
2015-10-24 Hans de Goedeubifs: Modify ubifs u-boot wrapper function prototypes...
2015-10-24 Hans de Goededisk/part: Only build hostfs special handling when...
2015-10-24 Pierre AubertAllow imxtract to extract part of script image.
2015-10-24 Thomas HuthFix bad return value checks (detected with Coccinelle)
2015-10-24 Guillaume GARDETARM: rpi: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG...
2015-10-24 Bernhard Nortmannallow LED initialization without STATUS_LED_BOOT
2015-10-23 Bernhard Nortmannadd generic stubs for GPIO LEDs
2015-10-23 Lokesh Vutladm: keystone: serial: Add driver model support
2015-10-23 Thomas Chounet: convert altera_tse to driver model and phylib
2015-10-23 Thomas Chounios2: fix virt_to_phys for nios2 with MMU
2015-10-23 Thomas Chounios2: add README.nios2
2015-10-23 Thomas Chounios2: zap nios2-generic board dir
2015-10-22 Thomas Chounios2: convert dma_alloc_coherent to use malloc_cache_a...
2015-10-22 Thomas Chounios2: convert copy_exception_trampoline to use dm...
2015-10-22 Thomas Chounios2: convert cache flush to use dm cpu data
2015-10-22 Thomas Chounios2: set default cache configuration in start.S
2015-10-22 Thomas Chounios2: zap initdram
2015-10-22 Thomas Chounios2: clean up comments style in start.S
2015-10-22 Thomas Chounios2: convert ioremap to use dm cpu data
2015-10-22 Thomas Chounios2: convert do_reset to use dm cpu data
2015-10-22 Thomas Chounios2: remove asm/psr.h
2015-10-22 Thomas Chounios2: convert altera sysid to driver model
2015-10-22 Thomas Choudm: implement a Miscellaneous uclass
2015-10-22 Thomas Chouserial: remove altera serial initializations
2015-10-22 Thomas Chounios2: convert altera timer to driver model
2015-10-22 Thomas Choutimer: start a new timer after relocation
2015-10-22 Thomas Choudm: implement a Timer uclass
2015-10-22 Thomas Chounios2: convert nios2 cpu to driver model
2015-10-22 Thomas Chounios2 : convert altera_pio to driver model
2015-10-22 Thomas Chounios2: add clear and set bits macros
2015-10-22 Thomas Chouspi : convert altera_spi to driver model
2015-10-22 Thomas Chounios2: convert altera_uart to driver model
2015-10-22 Thomas Chounios2: convert altera_jtag_uart to driver model
2015-10-22 Thomas Chounios2: map physical address to uncached virtual address
2015-10-22 Thomas Chounios2: enable malloc() pool before relocation
2015-10-22 Thomas Chounios2: call board_init_f_mem
2015-10-22 Thomas Chounios2: zap version_string
2015-10-22 Thomas Chounios2: zap dly_clks
2015-10-22 Thomas Chounios2: Split timer code into timer.c
2015-10-22 Thomas Chounios2: Switch to generic timer
2015-10-22 Thomas Chounios2: enable Driver Model
2015-10-22 Thomas Chounios2: enable device tree control of U-Boot
2015-10-22 Thomas Chounios2: define _end in link script
2015-10-22 Thomas Chounios2: remove gp assignments in link script
2015-10-22 Thomas Chounios2: enlarge the code relocation range
2015-10-22 Thomas Chounios2: BSS should be cleared only after board_init_f
2015-10-22 Thomas Chounios2: move altera_pio_init to board_early_init_r
2015-10-22 Thomas Chounios2: permit device tree control of U-Boot
next