]> git.sur5r.net Git - u-boot/shortlog
u-boot
2013-06-13 AmarFDT: Add compatible string for DWMMC
2013-06-13 Arkadiusz Wlodarczykarm:trats: change auto-booting to boot kernel with...
2013-06-04 Inderpal Singhexynos: Update origen and smdkv310 to use common tzpc_init
2013-06-04 Inderpal Singhexynos: update tzpc to make it common for exynos4 and...
2013-06-04 Inderpal Singhexynos: move tzpc_init to armv7/exynos
2013-05-21 Akshay SaraswatExynos: uart: s5p: enabling the uart tx/rx fifo
2013-05-21 Akshay SaraswatExynos5: clock: Update the equation to calculate PLL...
2013-05-20 Rajeshwari... SMDK5250: Enable SPI Gigabyte device.
2013-05-20 Rajeshwari... SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
2013-05-12 Andreas Bießmannat91sam9260ek: move board id setup to config header
2013-05-12 Bo Shenmmc: atmel_mci: add mmc card support
2013-05-12 Bo Shenmmc: atmel_mci: using IP version for different setting
2013-05-12 Wu, Josharm: at91: add at91sam9g20ek_mmc_config, which can...
2013-05-12 Wu, Josharm: at91: enable mci support for at91sam9g20ek.
2013-05-12 Wu, Josharm: at91: add at91sam9n12ek board support
2013-05-12 Wu, Josharm: at91: add at91sam9n12 register definition
2013-05-12 Bo Shenspi: atmel_spi: using ip version to check whether has...
2013-05-11 Albert ARIBAUDMerge branch 'u-boot-ti/master' into 'u-boot-arm/master'
2013-05-11 Albert ARIBAUDRevert wrong removal of nand_init and nand_deselect
2013-05-11 Albert ARIBAUDMerge branch 'u-boot-imx/master' into 'u-boot-arm/master'
2013-05-10 Albert ARIBAUDMerge branch 'u-boot-pxa/master' into 'u-boot-arm/master'
2013-05-10 SRICHARAN RARM: OMAP: Add arch_cpu_init function
2013-05-10 SRICHARAN RARM: OMAP: Cleanup boot parameters usage
2013-05-10 SRICHARAN RARM: OMAP: Correct save_boot_params and replace with...
2013-05-10 SRICHARAN RARM: OMAP4/5: Make OMAPx_SRAM_SCRATCH_ defines common
2013-05-10 SRICHARAN RARM: OMAP: Make omap_boot_parameters common across...
2013-05-10 Tom Riniam33xx: Fix warning with CONFIG_DISPLAY_CPUINFO
2013-05-10 Eric Benarddavinci: handle CONFIG_SYS_CLE_MASK and CONFIG_SYS_ALE_MASK
2013-05-10 Eric Benardda850: provide davinci_enable_uart0
2013-05-10 Igor Grinbergcm-t35: update config file
2013-05-10 Igor GrinbergMAINTAINERS: fix the cm-t35 board name
2013-05-10 Igor Grinbergcm-t35: move cm-t35 to live in compulab directory
2013-05-10 Dan MurphyARM: Panda: Add flag to allow runtime enviroment variba...
2013-05-10 Dan MurphyARM:Panda:Fix device tree loading for the panda-es
2013-05-10 Lokesh VutlaARM: OMAP5: Fix warm reset with USB cable connected
2013-05-10 Mark JacksonRemove duplicate / unused #defines on AM335x boards
2013-05-10 Tom Riniomap5_common: Add optargs variable for kernel command...
2013-05-10 Lubomir PopovOMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for...
2013-05-10 Enric Balletbo... ARM: Add support for IGEP COM AQUILA/CYGNUS
2013-05-10 Enric Balletbo... Add DDR3 support for IGEP COM AQUILA/CYGNUS.
2013-05-10 Lokesh Vutlaarm: omap: emif: Fix DDR3 init after warm reset
2013-05-10 Tom Rinibeagleboard: Update comment in get_board_rev()
2013-05-10 Lubomir PopovOMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and...
2013-05-10 Lubomir PopovOMAP5: I2C: Add I2C4 and I2C5 bases
2013-05-10 Lubomir PopovOMAP5: I2C: Enable i2c5 clocks
2013-05-10 Nishanth Menonpalmas: add header guard
2013-05-10 Nishanth Menonpalmas: use palmas_i2c_[read|write]_u8
2013-05-10 Nishanth Menonpalmas: rename twl6035_mmc1_poweron_ldo with an palmas...
2013-05-10 Nishanth Menonpalmas: rename init_settings to an generic palmas init
2013-05-10 Nishanth Menontwl6035: rename to palmas
2013-05-10 Nishanth Menontwl6030: add header guard
2013-05-10 Nishanth Menontwl6030: move twl6030 register access functions to...
2013-05-10 Nishanth Menontwl6030: twl6030_i2c_[read|write]_u8 prototype consistent
2013-05-10 Nishanth Menontwl4030: make twl4030_i2c_read_u8 prototype consistent
2013-05-10 Nishanth Menontwl4030: make twl4030_i2c_write_u8 prototype consistent
2013-05-10 Matt Porterti814x_evm: enable CPSW support
2013-05-10 Matt Porterphy: add support for ET1011C phys
2013-05-10 Matt Portercpsw: add support for TI814x slave_regs differences
2013-05-10 Matt Porteram33xx: add pll and clock support for TI814x CPSW
2013-05-06 Marek Vasutarm: mxs: video: Enable MXS LCDIF on M28EVK
2013-05-06 Marek Vasutarm: mxs: Add MXS LCDIF driver
2013-05-06 Marek Vasutarm: mxs: Add LCDIF registers for i.MX233
2013-05-06 Marek Vasutarm: mxs: Add LCDIF clock configuration function
2013-05-06 Benoît Thébaudeauimx: mx35pdk: Fix MUX2_CTR GPIO
2013-05-06 Michal Simekfpga: Remove all CONFIG_SYS_* fpga related options
2013-05-06 Michal Simekfpga: Check device name against bitstream name
2013-05-06 Michal Simekfpga: zynq: Add support for loading bitstream
2013-05-06 Michal Simekcmd: fpga: Do not include net.h
2013-05-06 Michal Simekfpga: Change the first parameter in fpga_loadbitstream
2013-05-06 Michal Simekcmd: fpga: Move fpga_loadbitstream to fpga.c
2013-05-06 Michal Simekcmd: fpga: Clean coding style
2013-05-06 Michal Simekfpga: Fix debug message compilation error
2013-05-06 Michal Simekfpga: Clean coding style
2013-05-06 Marek Vasutarm: mxs: Preprocess u-boot.bd so they contain full...
2013-05-06 Marek Vasutarm: mx23: Fix VDDMEM misconfiguration
2013-05-06 Fabio Estevammxs: Explain why some mx23 DDR registers are not configured
2013-05-06 Fabio Estevammx23_olinuxino: Do not set voltage selection bit for...
2013-05-06 Fabio Estevammx23evk: Do not set voltage selection bit for SSP pads
2013-05-06 Fabio Estevammx23: Operate DDR voltage supply at 2.5V
2013-05-05 Łukasz Dałekh2200: Add board reset support
2013-05-05 Łukasz Dałekpxa: Add weak attribute to reset_cpu() function
2013-05-05 Mike Dunnmtd: nand: add driver for diskonchip g4 nand flash
2013-05-05 Mike Dunnpxa27x_udc: remove call to unimplemented set_GPIO_mode()
2013-05-05 Mike Dunnpxa_lcd: make lcd_enable() a weak pointer
2013-05-05 Mike Dunnpxa_lcd: add the ACX544AKN lcd device
2013-05-05 Mike Dunnlib: import bitrev library from the linux kernel
2013-05-05 Benoît Thébaudeauimx: mx5: Remove legacy iomux support
2013-05-05 Benoît Thébaudeauimx: m53evk: Convert to iomux-v3
2013-05-05 Benoît Thébaudeauimx: mx53smd: Convert to iomux-v3
2013-05-05 Benoît Thébaudeauimx: mx53loco: Convert to iomux-v3
2013-05-05 Benoît Thébaudeauimx: mx53evk: Convert to iomux-v3
2013-05-05 Benoît Thébaudeauimx: mx53ard: Convert to iomux-v3
2013-05-05 Benoît Thébaudeauimx: ima3-mx53: Convert to iomux-v3
2013-05-05 Benoît Thébaudeauimx: iomux-v3: Add iomux-mx53.h
2013-05-05 Benoît Thébaudeauimx: vision2: Convert to iomux-v3
2013-05-05 Benoît Thébaudeauimx: mx51_efikamx/sb: Convert to iomux-v3
2013-05-05 Benoît Thébaudeauimx: mx51evk: Convert to iomux-v3
2013-05-05 Benoît Thébaudeauimx: iomux-v3: Add missing definitions to iomux-mx51.h
2013-05-05 Benoît Thébaudeauimx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27
2013-05-05 Benoît Thébaudeauimx: mx35: Remove legacy iomux support
next