]> git.sur5r.net Git - openocd/shortlog
openocd
2011-01-26 Thomas SchmidFixed small mistakes in at91sam3 info command
2011-01-26 Mathias Kadd basic TI xds100v2 support
2011-01-26 Andreas Fritiofsonfix segfault from stack corruption in ahbap_debugport_init
2011-01-19 Eric Wetzelstellaris: automatically generate and update device IDs
2011-01-14 Erik BotöFlash driver for em357
2011-01-14 Santeri Salkostr9xpec: Find flash controller from the chain.
2011-01-13 simon qiantransport: fix transport command args gaffe
2011-01-13 simon qiantransport: fix LOG_DEBUG gaffe
2011-01-10 Spencer Olivercfi: fix release build warnings
2011-01-09 Eric Wetzelnit: more LOG_* \n fixes
2011-01-09 Freddie ChopinAdd another level of procedures to LPC2xxx initializati...
2011-01-09 David Brownellpresent CM3 Trace agenda
2011-01-07 Freddie ChopinAdd common LPC2xxx setup procedure, use in all LPC2xxx...
2011-01-06 Spencer Olivercfi: use safer arch detection
2011-01-06 Spencer Oliverloader: update loader src for armv7-m arch
2011-01-06 Jonathan DumaresqAdd the support for the armv7m arch.
2011-01-06 Jonathan DumaresqAdd the contrib file for the armv7m arch
2011-01-05 Eric Wetzelnit: do not add \n at end of LOG_ERROR
2011-01-04 Spencer Olivermips32: add fastdata loader working area
2011-01-04 Spencer Olivertarget: change working area free data type
2011-01-03 Øyvind Harboenit: do not add \n at end of LOG_ERROR
2011-01-03 Øyvind Harboeerror handling: the error number is not part of the...
2011-01-02 Michael Schwingenactux3.cfg: add function to setup for u-boot debugging
2011-01-02 Michael Schwingencfi_protect is not implemented on Spansion flashes...
2011-01-02 Michael Schwingennon-CFI flash code uses data from CFI structures. Make...
2011-01-02 Jon Poveysvf: implement sleep for RUNTEST min_time
2011-01-02 Jon Poveysvf: fix USAGE and related error reporting
2011-01-02 Antonio BorneoNAND/S3CXXXX: remove private "target" copy
2011-01-02 Antonio BorneoNAND/ORION: remove private "target" copy
2011-01-02 Antonio BorneoNAND/NUC910: remove private "target" copy
2011-01-02 Antonio BorneoNAND/MX3: remove private "target" copy
2011-01-02 Antonio BorneoNAND/MX2: remove private "target" copy
2011-01-02 Antonio BorneoNAND/LPC3180: remove private "target" copy
2011-01-02 Antonio BorneoNAND/DAVINCI: remove private "target" copy
2011-01-02 Antonio BorneoNAND/AT91SAM9: remove private "target" copy
2011-01-02 Antonio BorneoNAND/TCL: prepare for common "target" reference
2011-01-02 Antonio BorneoNAND/TCL: fix segfault on syntax error
2011-01-02 Antonio BorneoNAND/CORE: Comment use of alive_sleep()
2011-01-02 Antonio BorneoNAND/CORE: Replace decimal dot in messages
2011-01-02 Antonio Borneoflash/nand: review NAND driver interface
2010-12-30 Marek VasutCORTEX A8: Fix broken CPU identification
2010-12-29 Andrew MacIsaacCompilation Warnings on OS X 10.5
2010-12-29 Øyvind Harboewarning: fix warning where GCC didn't catch a doubly...
2010-12-29 Øyvind Harboewarnings: use more 'const' for char *
2010-12-29 Øyvind Harboetarget: do not expose error numbers to users
2010-12-25 David Brownellinitial SWD transport (SWD infrastructure #2)
2010-12-23 Spencer Oliverstm32x : always use valid flash base address
2010-12-23 Spencer Oliverflash: print flash bank name on flash info cmd
2010-12-23 Spencer Oliverstm32: fix reversed option byte write
2010-12-23 Spencer Oliverstm32: update option bytes for stm32xl family
2010-12-23 Spencer Oliverstm32: add stm32 xl family flash support
2010-12-23 Spencer Oliverstm32: add dual flash bank support
2010-12-23 Spencer Olivercontrib: change stm32 flash loader extension
2010-12-22 Øyvind Harboelpc2148: redo to the new target configuration scheme
2010-12-22 Øyvind Harboeconfig: add init_targets proc that is executed just...
2010-12-22 Øyvind Harboebootstrap: by default the submodules are initialized
2010-12-21 Øyvind Harboeserver: remove error value from LOG_INFO
2010-12-20 Tormod Voldentcl/interface/flashlink.cfg: Fix broken ST URL
2010-12-20 Tormod Voldentcl/board: Clean up STM32 EVAL boards configurations
2010-12-20 Tormod Voldentcl/board: Fix ST URLs in stm32* eval board configurati...
2010-12-19 Michael Schwingenupdate IXP42x target / XBA board config
2010-12-18 Michael TrenschAdd support for Hilscher netX controllers
2010-12-18 Øyvind Harboescript: support only Tcl comments
2010-12-18 Antonio BorneoTCL: fix non TCL comments
2010-12-16 Øyvind Harboeopenocd doc: update the comments about Jim Tcl a bit
2010-12-16 John DevereuxFix for compilation failure amt_jtagaccel.c
2010-12-15 Paul RichardsFix for segfault in handle_nand_dump_command.
2010-12-15 Øyvind Harboestm32: fix unprotect
2010-12-15 Øyvind Harboeflash: clarify protect documentation
2010-12-10 Spencer Olivercontrib: add source to the cfi flash loaders
2010-12-10 Spencer Olivercontrib: make sure loaders use correct arch
2010-12-10 Spencer Oliverstm32: add STM32E-EVAL external memory config script
2010-12-10 Spencer Olivercfi: disable buffer writes for M29W128G
2010-12-10 Spencer Olivercfi: allow optional buffer write support
2010-12-10 Spencer Olivercfi: calculate correct timeouts
2010-12-10 Spencer Olivercfi: prefix string hex output
2010-12-10 Spencer Olivercfi: add time format to cfi query output
2010-12-10 Spencer Olivercfi: whitespace and long line cleanup
2010-12-10 Paul RichardsFix for segmentation fault from freed memory access...
2010-12-09 Freddie Chopinremove srst_pulls_trst from LPC2xxx target scripts
2010-12-08 Spencer Oliverbuild: fix build from previous commit
2010-12-08 Øyvind Harboejtag: getting the JTAG speed can fail
2010-12-07 Andrew Leechsvf: various improvements
2010-12-05 Rolf Meeserlpc2478 target config: CCLK as (mandatory) parameter
2010-12-04 Mike Dunnxscale: trace buffer remains enabled until explicitly...
2010-12-04 Rolf MeeserAdd board config for Embedded Artists LPC2478-32
2010-12-04 Rolf MeeserFix flash name in Hitex LPC2929 board config
2010-12-04 Rolf MeeserFix sector layout for 504-KiB LPC2000 devices
2010-12-03 Spencer Oliverstm32: set default soft reset config
2010-12-03 Spencer Oliverluminary: remove unused config cmds.
2010-12-03 Spencer Olivercortex_m3: change cortec_m3 reset_config behaviour
2010-12-02 Spencer Oliverconfig: fix luminary jtag config
2010-12-02 Freddie Chopinrename some target scripts to be consistent with the...
2010-12-01 Øyvind Harboeprofile: use 100Hz as a default sampling frequency
2010-12-01 Rolf Meeserlpc2900.c: Improve debug output for device probing
2010-12-01 Rolf Meeserlpc2900.c: Add support for new device LPC2926
2010-12-01 Rolf MeeserLPC2900: Avoid false positive reprobing if first probin...
2010-11-30 Piotr Esden... Some cosmetic fixes to the Lisa/L layout support functions.
2010-11-30 Piotr Esden... Added support for the blinking leds on Floss-JTAG v0...
2010-11-30 Piotr Esden... Updated Floss-JTAG config file to support v0.3 and...
next