]> git.sur5r.net Git - u-boot/shortlog
u-boot
2012-10-26 Fabio Estevammx53loco: Allow booting a zImage kernel
2012-10-26 Fabio Estevammx25pdk: Add Ethernet support
2012-10-26 Fabio Estevampmic: Add support for mc34704
2012-10-26 Fabio Estevammx25: Place common functions into sys_proto.h
2012-10-26 Fabio Estevampmic_fsl: Introduce FSL_PMIC_I2C_LENGTH
2012-10-26 Fabio Estevammx25pdk: Add esdhc support
2012-10-26 Fabio Estevammx25pdk: Include CONFIG_MX25
2012-10-26 Stefano BabicMX35: add support for woodburn board
2012-10-26 Stefano BabicARM: Add SPL target to arm1136
2012-10-26 Stefano BabicSPL: Added SPL target for mx35 SOC to SPL Makefile
2012-10-26 Stefano BabicMX35: Add soc_boot_mode and soc_boot_device to MX35
2012-10-26 Stefano BabicMX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK
2012-10-26 Stefano BabicARM: Fix start.S when used with SPL in arm1136
2012-10-26 Stefano BabicMX5: fix warning in clock.c
2012-10-20 Troy Kiskyimximage: make set_imx_hdr_v1/v2 easier to read
2012-10-20 Troy Kiskyimximage: change parameters to set_imx_hdr
2012-10-20 Troy Kiskyimximage: delay setting of image size
2012-10-20 Troy Kiskyimximage: fix size of image to load.
2012-10-20 Troy Kiskyimximage: move flash_offset check to common location
2012-10-20 Troy Kiskyimximage: remove redundant setting of app_dest_ptr
2012-10-20 Troy Kiskyimximage: check dcd_len as entries added
2012-10-20 Fabio Estevammx6qarm2: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER
2012-10-20 Fabio Estevammx6qsabre_common: Enable DCACHE and CONFIG_MMC_BOUNCE_B...
2012-10-20 Fabio Estevammx25pdk: Use internal RAM for stack pointer
2012-10-17 Fabio Estevammx5: Add workaround for ARM erratum ID 468414
2012-10-17 Dirk Behmemx6qsabrelite: enable DCache and MMC bounce buffer
2012-10-17 Fabio Estevamconfigs: mx53evk: Remove CONFIG_HAS_ETH1
2012-10-17 Fabio Estevamconfigs: mx51evk: Remove CONFIG_HAS_ETH1
2012-10-17 Fabio Estevamconfigs: mx53loco: Remove CONFIG_HAS_ETH1
2012-10-17 Fabio Estevammx53loco: Adapt the IPU clock
2012-10-17 Fabio Estevammx5: lowlevel_init.S: Fix PLL settings for mx53
2012-10-17 Fabio Estevammx5: lowlevel_init.S: Split init_clock macro
2012-10-16 Benoît Thébaudeaumx25: Clean up imx-regs.h
2012-10-16 Eric Nelsoni.MX6: mx6qsabrelite: Add splash screen support
2012-10-16 Eric Nelsoni.MX6: add HDMI transmitter register declarations from...
2012-10-16 Eric Nelsoni.MX6: set drive strength for parallel RGB pads
2012-10-16 Eric Nelsoni.MX: ipufb: add const to fb_videomode declarations
2012-10-16 Eric Nelsoni.MX video: struct fb_videomode can be const
2012-10-16 Eric Nelsoni.MX: declare iomux_v3_cfg_t arrays as const
2012-10-16 Eric Nelsoni.MX: iomux: input pad array can be const
2012-10-16 Fabio Estevammx6qsabreauto: Pass the board revision to the kernel
2012-10-16 Otavio Salvadormx6qsabreauto: Change mmcroot so it works out of box
2012-10-16 Benoît Thébaudeaumxc: Fix SDHC multi-instance clock
2012-10-16 Benoît Thébaudeaumx35: Fix eSDHC clocks
2012-10-16 Benoît Thébaudeaumx35: Clean up lowlevel_init
2012-10-15 Tom RiniMerge branch 'agust@denx.de-next' of git://git.denx...
2012-10-15 Joe Hershbergertools/env: Fix build failure from missing header include
2012-10-15 Marek Vasutkerneldoc: Add myself to the git-mailrc for kerneldoc
2012-10-15 Marek Vasutkerneldoc: Implement "Example" section handling
2012-10-15 Marek Vasutkerneldoc: Add nicer CSS stylesheet for HTML docs
2012-10-15 Marek Vasutkerneldoc: Implant DocBook from Linux kernel
2012-10-15 Fabio Estevamconfigs: mx6qsabre_common.h: Use default clock definitions
2012-10-15 Fabio Estevammx6qsabreauto: Add Ethernet support
2012-10-15 Benoît Thébaudeaumx25: Clean up lowlevel_init
2012-10-15 Benoît Thébaudeaumx31: Fix PDR0_CSI_PODF
2012-10-15 Benoît Thébaudeaumx35: Define MAX and AIPS registers
2012-10-15 Benoît Thébaudeaumx31: Add more CCM access macros
2012-10-15 Benoît Thébaudeaumx5: Optimize lowlevel_init code size
2012-10-15 Otavio Salvadormx6qsabreauto: Use ttymxc3 as console
2012-10-15 Benoît Thébaudeaumx25: Fix eSDHC support
2012-10-15 Benoît Thébaudeaumx25: Define cpu_eth_init() only if needed
2012-10-15 Benoît Thébaudeaumx25: Clean up clocks API
2012-10-15 Benoît Thébaudeaumx25 clocks: Fix MXC_FEC_CLK
2012-10-15 Benoît Thébaudeaumx25: Define more standard clocks
2012-10-15 Benoît Thébaudeaumx25: Clean up clock calculations
2012-10-15 Benoît Thébaudeaumx25: Fix decode_pll
2012-10-15 Benoît Thébaudeaumx5/6 clocks: Fix SDHC clocks
2012-10-15 Benoît Thébaudeaumx51: Fix I2C clock ID check
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix MXC_FEC_CLK
2012-10-15 Benoît Thébaudeaumx5 clocks: Simplify imx_get_cspiclk()
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix get_uart_clk()
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix get_ipg_per_clk()
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix get_periph_clk()
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix get_lp_apm()
2012-10-15 Benoît Thébaudeaumx5 clocks: Add and use CCSR definitions
2012-10-15 Benoît Thébaudeaumx51: Fix USB PHY clocks
2012-10-15 Benoît Thébaudeaumx5: Fix clock gate values
2012-10-15 Benoît Thébaudeaumx5: Use explicit clock gate names
2012-10-15 Benoît Thébaudeaumx5 clocks: Cleanup
2012-10-15 Benoît Thébaudeaumx5/6: Define default SoC input clock frequencies
2012-10-15 Matthias Weisserimx: Use MXC_I2C_CLK in imx i2c driver
2012-10-15 Eric Benardmx25: add CPU revision 1.2
2012-10-15 Fabio Estevammx6q: Add basic support for mx6qsabreauto
2012-10-15 Fabio Estevamconfigs: mx6: Add a common config file
2012-10-15 Eric Nelsoni.MX6: get rid of redundant struct src_regs (dupe of...
2012-10-15 Eric Nelsoni.MX6: define struct iomuxc and IOMUX_GPR2 register...
2012-10-15 Eric Nelsoni.MX6: Add ANATOP_PFD_480 bitfield constants
2012-10-15 Eric Nelsoni.MX6: define IOMUX_GPR3 register bitfields
2012-10-15 Eric Nelsoni.MX6: define bitfields for CHSCCDR register
2012-10-15 Eric Nelsoni.MX6: change register name for CCM_CHSCCDR to match...
2012-10-15 Eric Nelsoni.MX6: provide functional names for CCM_CCGR0-CCGR6...
2012-10-15 Fabio Estevammx6qsabresd: Add 8-bit USDHC support
2012-10-15 Fabio Estevammx6qsabresd: Add Ethernet support
2012-10-15 Fabio Estevammx6: Add basic support for mx6qsabresd board.
2012-10-15 Fabio Estevammx6q: Factor out common DDR3 init code
2012-10-15 Lukasz Dalekpxa: Add code to examine cpu model and revision
2012-10-15 Lucas Stachtegra: nand: add board pinmux
2012-10-15 Lucas Stachtegra: clean up board include hell
2012-10-15 Lucas Stachtegra: add funcmux entry for NAND attached to KBC
2012-10-15 Lucas Stachtegra20: rework UART GPIO handling
next