]> git.sur5r.net Git - u-boot/shortlog
u-boot
2010-10-17 Steve SakomanARMV7: OMAP4: Use generic mmc driver on Overo
2010-10-17 Steve SakomanARMV7: OMAP4: Use generic mmc driver on Beagle
2010-10-17 Sukumar GhoraiARMV7: OMAP4: Use generic mmc driver on SDP4430
2010-10-17 Sukumar GhoraiARMV7: OMAP4: Use generic mmc driver on Panda
2010-10-17 Sukumar GhoraiARMV7: OMAP: Add new mmc driver compatible with CONFIG_...
2010-10-17 Sukumar GhoraiMMC: Fix for capacity calculation on eMMC
2010-10-17 Steve SakomanARMV7: OMAP: Use default vendor/product ID for USB...
2010-10-17 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-imx
2010-10-14 Loic Miniermx51evk: add u-boot.imx to ALL target
2010-10-13 Steve Sakomanenv_mmc: Fix crashing bug encountered after enabling...
2010-10-13 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-arm
2010-10-13 Wolfgang DenkMerge branch 'sf' of git://git.denx.de/u-boot-blackfin
2010-10-13 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-usb
2010-10-13 Matthew McClintockcommon/fdt_support.c: fix compile error
2010-10-13 Stefano BabicMX31: Add USB Host support to the QONG board
2010-10-13 Stefano BabicMX31: Add support for MXC EHCI controller
2010-10-13 Stefano BabicMX31: add support for setting pin pads
2010-10-13 Stefano BabicMX31: Add support to update FPGA bitstream
2010-10-13 Stefano BabicMX31: Adding missing iomux pin to MX.31 registers
2010-10-13 Stefano BabicFPGA: add support for downloading Lattice bitstream
2010-10-13 Bryan Wuusb: musb: only write CLRDATATOG when appropriate
2010-10-13 Ludovic Courtèsusb: Add support for multiple-LUN mass storage devices
2010-10-13 Vitaly KuzmichevUSB-CDC: Prevent rx_req being enqueued twice
2010-10-13 Vitaly KuzmichevUSB-CDC: Fix tx/rx_req memory leaks
2010-10-13 Marek VasutUSB: Make non-bulk delay longer in OHCI
2010-10-13 Andreas Bießmannboard/armltd/integrator/split_by_variant.sh: fix 'echo -n'
2010-10-13 Matt WaddelARMV7: Fixed baudrate setting in pl01x driver
2010-10-13 Matt WaddelARMV7: Versatile Express Coretile CortexA9x4 support
2010-10-13 Andreas Bießmannarch/arm/include/asm/sizes.h: cleanups
2010-10-13 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-marvell
2010-10-13 Ben GardinerARM: relocation: don't undef CONFIG_SYS_ARM_WITHOUT_RELOC
2010-10-13 Heiko SchocherARM: relocation: fix typo in comment
2010-10-13 Prafulla WadaskarKirkwood: Changes specific to ARM relocation support
2010-10-13 Prafulla Wadaskarkirkwood: added common config file mv-common.h
2010-10-13 Prafulla WadaskarKirkwood: dram_init is moved to dram.c
2010-10-13 Albert Aribaudorion5x: optimize window size computation
2010-10-13 Prafulla WadaskarKirkwood: print_cpuinfo fixed for valid devid revid
2010-10-13 Albert Aribaudmvsata_ide: adjust port init sequence
2010-10-13 Reinhard Meyersf: turn probe switch into a lookup table
2010-10-12 Brent DarleyTSI148: Fix argument parsing
2010-10-12 Peter Tyserpowerpc: Remove warm reset entry point
2010-10-12 Peter Tyserppmc7xx: Use _start as reset entry point
2010-10-12 Peter Tyserpowerpc: Zero out board info struct on bootup
2010-10-12 Stefan Roesecp/cmp: Add WATCHDOG_RESET in copy and compare loop
2010-10-12 Peter Tyserexamples/standalone: Use gcc's -fno-toplevel-reorder
2010-10-12 Ilya Yanoka4m072: support for SHOW_BOOT_PROGRESS feature using...
2010-10-12 Ilya Yanoka4m072: led display support
2010-10-12 Ilya Yanokled_display: split led display support into generic...
2010-10-12 Sergei PoselenovA4M072: Added support for the board.
2010-10-12 Mikhail ZolotaryovVFAT: fix processing of scattered long file name entries
2010-10-12 Daniel Hobitools/imls: fix comment in Makefile
2010-10-12 Lei Wenenv: don't set to default env twice when use CONFIG_ENV...
2010-10-12 Stefan Roesezlib: Add further watchdog reset calls
2010-10-12 Stefan Roesezlib/gunzip: Use WATCHDOG_RESET macro
2010-10-12 Anatolij Gustschinpdm360ng: add EDID property to FDT display node
2010-10-12 Anatolij Gustschinfdt_support: support adding EDID property to FDT displa...
2010-10-12 Alexander SteinCONFIG_CMD_JFFS2 is not necessary to use mtdparts on...
2010-10-12 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-cfi...
2010-10-12 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-micro...
2010-10-12 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-net
2010-10-12 Prafulla WadaskarKirkwood: Changes specific to ARM relocation support
2010-10-12 Prafulla Wadaskarkirkwood: added common config file mv-common.h
2010-10-12 Prafulla WadaskarKirkwood: dram_init is moved to dram.c
2010-10-12 Albert Aribaudorion5x: optimize window size computation
2010-10-12 Prafulla WadaskarKirkwood: print_cpuinfo fixed for valid devid revid
2010-10-12 Albert Aribaudmvsata_ide: adjust port init sequence
2010-10-12 John Schmollercfi_flash: Fix "Unknown FLASH" error message
2010-10-12 Michal Simekmicroblaze: Support little-endian microblaze target
2010-10-12 Michal Simekmicroblaze: Add support for NET_MULTI api
2010-10-12 Michal Simekmicroblaze: Fix microblaze-generic config file
2010-10-12 Stephan Linzmicroblaze: generic: rename MTD partition set to 'flash-0'
2010-10-12 Stephan Linzmicroblaze: generic: adding DHCP support
2010-10-12 Thomas Chousmc91111: add write_hwaddr
2010-10-12 Ben Gardinerdavinci_emac: davinci_eth_set_mac_addr to ->write_hwaddr
2010-10-12 Michal Simeknet: Move Emaclite to NET_MULTI
2010-10-12 Peter Tyserrarp: Condtionally compile rarp support
2010-10-12 Michal Simeknet: Fix emaclite driver to support little-endian micro...
2010-10-12 Ilya Yanokmpc5xxx_fec: add call to reset_phy() after PHY initiali...
2010-10-12 Andreas Bießmanndrivers/net/at91_emac.c: change return values
2010-10-12 Andreas Bießmanndrivers/net/at91_emac.c: increase timeout for autonegot...
2010-10-12 Reinhard MeyerNET: add ENC28J60 driver using SPI framework
2010-10-12 Joakim TjernlundUEC PHY: Speed up initial PHY neg.
2010-10-12 Ben WarrenNet: Remove redundant CONFIG_NET_MULTI directives
2010-10-12 Joakim TjernlundUEC PHY: Remove strange 0.5 sec delay
2010-10-12 Joakim TjernlundUEC: Don't udelay needlessly
2010-10-12 Reinhard Meyer... NET: move legacy enc28j60.c to sidetrack as enc28j60_lp...
2010-10-12 Joakim Tjernlundnet: Fix faulty definition of uec_initialize()
2010-10-11 Enric Balletbo... mtd: OneNAND: add support for OneNAND manufactured...
2010-10-11 Scott WoodREADME: Add new NAND env features
2010-10-11 Scott WoodFollowup fixes on the mtdparts spread patchset
2010-10-11 Ben Gardinermtdparts: new add.spread: add part skipping bad blocks
2010-10-11 Ben Gardinermtdparts: add new sub-command "spread"
2010-10-11 Ben Gardinermtdparts: show net size in mtdparts list
2010-10-11 Ben Gardinermtd: add an mtd method for get_len_incl_bad()
2010-10-11 Ben Gardinermtdparts: regroup calls to get_mtd_device_nm
2010-10-11 Scott Woodnand: remove dead code and suspend/resume
2010-10-11 Scott Woodnand commands: make only "dump" repeatable.
2010-10-11 Scott Woodnand erase: .spread, .part, .chip subcommands
2010-10-11 Scott Woodcmd_nand: some infrastructure fixes and refactoring
2010-10-11 Scott Woodnand util: read/write: accept unaligned length
next