]> git.sur5r.net Git - openocd/shortlog
openocd
2015-09-30 Andreas Färberzynq_7000: Add expected ID
2015-09-30 Andreas Färbertcl/interface/ftdi: Add Digilent JTAG-HS3 config
2015-09-30 Paul Fertsersvf: fix segfaults exposed by some SVF
2015-09-30 Philipp Wagnertcl_server: Support line buffers up to 4M (v3)
2015-09-28 Austin Mortonserver: remove connection limit from tcl and telnet...
2015-09-05 Austin Mortonserver: tcl_trace command
2015-08-19 Alamy Liuflash/nor/jtagspi: 'retval' may be used uninitialized
2015-08-06 Paul Fertsersvf: flush the queue before reallocing memory
2015-08-06 Evan Hunterflash : Add support for Atmel at91sam4sa16b
2015-08-06 Evan Huntergdb_server: Add check for malloc fail
2015-08-06 Christoph Pittracherbcm2835gpio: Add SWD support, Raspberry Pi 2 support.
2015-08-06 Andrey Yurovskyat91samd: add chip IDs for SAMC20 and SAMC21 families
2015-08-06 Paul Fertsersim3x: fix build failure with clang 3.6
2015-08-06 Robert Jordenskc705: digilent-jtag/kintex7/jtagspi board
2015-08-06 Robert Jordenspipistrello: ftdi-jtag/spartan6/jtagspi board
2015-08-06 Robert Jordensflash/nor/jtagspi: add JTAGSPI driver
2015-08-06 Robert Jordensflash/nor/tcl: add read_bank and verify_bank
2015-08-06 Robert Jordenscpld/virtex2: allow JSTART to be disabled
2015-08-06 Robert Jordensflash/nor/spi: add micron/numonyx n25q128
2015-08-06 Robert Jordenstarget/testee: manage target->state
2015-08-06 Andreas Färbertcl/board: Add EmCraft VF6 SOM and baseboard configs
2015-08-06 Andreas Färbertcl/target: Add Freescale Vybrid VF6xx config
2015-08-06 Kyle Mannajlink: Add on-board nRF51-DK USB VID and PID
2015-08-06 Kyle Mannaudev: Add J-Link on-board nRF51-DK
2015-08-06 Radek Dostaltcl: replace $TARGETNAME with $_TARGETNAME
2015-08-06 Alexander DrozdovRTOS: ThreadX support on ARM926E-JS
2015-08-06 Karl Palssontarget: check memory handlers before use for all types
2015-06-30 Paul Fertsermanual: make it compatible with ancient texinfo version...
2015-05-17 Paul FertserRestore normal development cycle
2015-05-17 Paul FertserThe openocd-0.9.0 release v0.9.0
2015-05-17 Paul FertserNEWS: last pre-release changes
2015-05-17 Paul Fertserjtag/drivers/stlink: fix SRST issue with stlink-v1
2015-05-17 Vincent Palatinpsoc4: add support for Cypress CCG1 family
2015-05-17 Peter A. Bigotnrf51: refine and extend known devices table
2015-05-17 Karl Palssondocs: gdb_target_description defaults enabled
2015-05-17 Austin Mortonserver: avoid the tcl server crashing when there is...
2015-05-17 Paul Fertsermanual: add missing usb blaster commands
2015-05-17 Paul Fertsermanual: fix usb_blaster_pin command syntax and description
2015-05-17 Paul FertserREADME.Windows: clarify the kernel drivers installation
2015-05-17 Paul Fertsermanual: reorder flash driver info
2015-05-17 Paul Fertsermanual: fix all overfull and underfull hboxes
2015-05-17 Paul Fertsermanual: remove the lists of config files
2015-04-24 Paul FertserRestore -dev suffix
2015-04-24 Paul FertserThe openocd-0.9.0-rc1 release candidate v0.9.0-rc1
2015-04-24 Paul FertserAdd NEWS in preparation for the new release
2015-04-24 Paul Fertserjtag/drivers/ti_icdi: do not segfault when adapter...
2015-04-24 Andreas Färberxmc4500-application-kit-general: Drop srst_nogate
2015-04-24 Jiri Kastnertarget/ti_tms570.cfg: added several JTAG IDs for TMS570...
2015-04-24 Alex RayTI TMS570 USB Kit board config
2015-04-24 Paul Fertserrtos/mqx: prevent crash with -rtos auto
2015-04-24 Paul Fertsertarget/cortex_a: examination should be done every time...
2015-04-24 Paul Fertsertarget: try to reexamine even when polling fails
2015-04-24 Paul Fertserrtos: fix print format specifiers
2015-04-16 Simon Qianconfigure the SWD frequency when setting adapter speed...
2015-04-16 Andrey Yurovskyflash: at91samd: add SAML21 support, fix part ID issue
2015-04-16 Uwe Bonnesstlink_usb.c: Decode some more errors.
2015-04-16 Paul Fertserflash/nor/mdr: add docs, remove memory leak on probe()
2015-04-16 Marc Schinkflash: efm32: Add support for EZR32LG and EZR32WG.
2015-04-16 Spencer Oliverdocs: update OpenOCD url's to openocd.org domain
2015-04-16 Spencer Olivercmsis-dap: print vendor and product id on open failure
2015-04-16 Mahavir Jaindoc/openocd.texi: fix formatting for mrvlqspi driver...
2015-04-16 Paul Fertsertcl/target/stm32f3: fix reset init for stlink
2015-04-16 Paul Fertsercontrib/itmdump: add a hack to allow direct dumping...
2015-04-16 Paul FertserFix several format specifiers errors exposed by arm...
2015-04-16 Felipe Balbiboard: ti_am43xx_evm: remove xds100v2 interface
2015-04-16 Andreas Fritiofsonrtos: add instructions and helper code to make FreeRTOS...
2015-04-16 Andreas FritiofsonFreeRTOS: Make optional symbols optional
2015-04-14 Tomas VanekAT91SAM4L: handle reset run/halt in SMAP
2015-04-14 Paul Fertsertarget/arm_adi_v5, cortex_m: retry ahbap_debugport_init...
2015-04-14 Paul Fertsertarget/cortex_a: emit a clear error message when dbgbas...
2015-04-14 Paul Fertserflash/nor/lpc2000: free allocated working area when...
2015-04-14 Paul Fertserjtag/adi_v5_jtag: fix infinite recursion in jtagdp_tran...
2015-04-14 Paul Fertserflash/nor/lpc2000: properly free working area used...
2015-04-14 Paul Fertserjtag/startup.tcl: fix regression with autoselecting...
2015-04-14 Richard BraunChibiOS: fix crash on auto detection
2015-04-14 Paul FertserTcl exception codes cleanup, shutdown command amendments
2015-04-14 Juha Niskanenhelper: shutdown command should return with 0 exit...
2015-04-14 Paul Fertserjtag/tcl: fix incorrect memcpy in jim_newtap_expected_id
2015-04-14 Uwe Bonnesturtelizer2-revC: Tested with real hardware.
2015-04-14 Nemui Trinomiuslpc2000: Removed cmd51_can_xxxxb variables.
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC 2Go config
2015-04-14 Patrick NoffkeAdded Atmel SAM4SA16C chip (chip ID 0x28a70ce0).
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC1100 Boot Kit config
2015-04-14 Andreas Färbertcl/target: Add Infineon XMC1000 family target config
2015-04-14 Andreas Färbertcl/board: Add Spansion SK-FM4-176L-S6E2CC config
2015-04-14 Andreas Färbertcl/target: Add Spansion FM4 config
2015-04-14 Ed Berosetstartup: Fixed measure_clk to return kHz instead of...
2015-04-14 Ed Berosetem357: Corrected EM357 support including errata details
2015-04-14 Uwe Kleine... Cortex-A: Don't flush the data/unified cache if MMU...
2015-04-14 Evan HunterRTOS: Add logging to FreeRTOS and general RTOS
2015-04-14 Paul Fertsertcl/interface/parport: default to sane value on non...
2015-04-14 Paul Fertserjtag/core: honour SRST timings in SWD mode
2015-04-14 Jeff Ciesielskitcl/board: Add Infineon XMC4500 Relax Kit config
2015-04-14 Jeff Ciesielskitcl/board: Add Infineon XMC4200 Application Kit config
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC4500 Application Kit configs
2015-04-14 Andreas Färbertcl/target: Add Infineon XMC4000 family config
2015-04-14 Felipe Balbitcl: icepick: add icepick_d_set_coreid
2015-04-14 Felipe Balbitarget: icepick: call icepick_c_setup
2015-04-14 Felipe Balbitarget: icepick: switch over to icepick_c_router
2015-04-14 Felipe Balbitcl: target: am437x: pass coreid
next