]> git.sur5r.net Git - u-boot/shortlog
u-boot
2018-01-30 Ulf Magnussonarm64: zynqmp: Fix misspelled choice default
2018-01-30 Vipul Kumararm64: zynqmp: Moved ethernet PHY configs of ZynqMP...
2018-01-30 Vipul Kumarmicroblaze: Moved ethernet PHY configs of Microblaze...
2018-01-30 Vipul Kumararm: zynq: Moved ethernet PHY configs of Zynq boards...
2018-01-30 Michal Simekarm: zynq: Remove ethernet alias for topic-miami
2018-01-30 Michal Simekarm: zynq: Mark cc108 uart to be initialized before...
2018-01-30 Michal Simekarm: zynq: Update years in copyright to reflect latest...
2018-01-30 Michal Simekarm64: zynqmp: Add psu_init for zcu102-rev1.0
2018-01-30 Michal Simekarm64: zynqmp: Prepare psu_init rework
2018-01-30 Michal Simekarm64: zynqmp: Call psu_init() only when ZYNQMP_PSU_INI...
2018-01-30 Michal Simekarm64: zynqmp: Remove unused empty functions
2018-01-30 Ezequiel Garcianand: arasan: Select CONFIG_SYS_NAND_SELF_INIT
2018-01-30 Siva Durga... nand: arasan_nfc: Use the calculated ecc address for...
2018-01-30 Siva Durga... nand: arasan_nfc: Add support for ondie ecc
2018-01-30 Siva Durga... nand: arasan_nfc: Move common ecc struct initialization...
2018-01-30 Siva Durga... xilinx: zynqmp: Add new target with only emmc enabled
2018-01-30 Siva Durga... xilinx: zynqmp: Add new target with only nand enabled
2018-01-30 Siva Durga... arm64: zynqmp: Provide a config to not map DDR region...
2018-01-30 Michal Simekarm64: zynqmp: Propagate error value from psu_init()
2018-01-30 Michal Simekarm64: zynqmp: Remove whitespaces in psu_init() comment
2018-01-30 Michal Simekarm: zynq: Fix pmu register description coding style
2018-01-30 Michal Simekarm: zynq: Enable distro defaults setting
2018-01-30 Michal Simekarm: zynq: Move bootcommand to defconfig
2018-01-30 Michal Simekarm: zynq: Enable DM_GPIO when needed
2018-01-30 Michal Simekarm: zynq: Enable DM_ETH and DM_MMC only if subsystem...
2018-01-30 Michal Simekarm: zynq: Enable BLK when needed
2018-01-30 Michal Simekarm: zynq: Disable networking for zc770 xm011
2018-01-30 Michal Simekarm: zynq: Enable debug console for zc770 xm011
2018-01-30 Michal Simekarm: zynq: Add identification string to Xilinx boards
2018-01-30 Anders Hedlundarmv8: zynqmp: Map PCIe High as device memory
2018-01-30 Siva Durga... xilinx: zynqmp: Use strlen only if env_get doesn't...
2018-01-30 Masahiro YamadaARM: zynq: remove unused CONFIG_ZC770_XM01* options
2018-01-30 Michal Simekarm: zynq: Fix types in ps7_spl_init
2018-01-30 Michal Simekarm: zynq: Add support for zc770-xm011-x16 configuration
2018-01-30 Michal Simekarm: zynq: Add zc770-xm013 spl configuration
2018-01-30 Michal Simekarm: zynq: Add zc770-xm012 spl configuration
2018-01-30 Michal Simekarm: zynq: Add zc770-xm011 spl configuration
2018-01-30 Michal Simekarm: zynq: Add zc770-xm010 spl configuration
2018-01-30 Michal Simekdoc: zynq: Describe status of zc770-xm011
2018-01-24 Ezequiel Garciadoc: Update the zynq u-boot status
2018-01-24 Ezequiel Garciaarm: zynq: Enable SPL_CLK only if SPL is enabled
2018-01-16 Tom Rinitools: Update python "help" tests to cope with "more...
2018-01-16 Tom RiniMerge git://git.denx.de/u-boot-i2c
2018-01-16 Tom RiniMerge git://git.denx.de/u-boot-dm
2018-01-16 Peng Fani2c: mxc_i2c: Use or operation
2018-01-16 Peng Fanimx: mx7ulp: modify lpi2c seq number
2018-01-16 Peng Fani2c: lpi2c: do not add 4 for bus seq
2018-01-16 Simon Glasstest: Set the DTC environment variable
2018-01-16 Simon Glassdtoc: Allow DTC environment variable to provide path...
2018-01-16 Andre Przywaraarmv8: secure firmware: fix incorrect unit address...
2018-01-16 Andre Przywaratools: fix incorrect usage of DT node unit address
2018-01-16 Andre Przywarasunxi: arm64: correct usage of DT node address in FIT...
2018-01-16 Andre Przywarafix incorrect usage of DT node unit address in comments
2018-01-16 Andre Przywaradoc: fix incorrect usage of DT node unit address
2018-01-16 Andre Przywaradoc: FIT image: fix incorrect examples of DT node unit...
2018-01-16 Andre Przywaradoc: FIT image: fix incorrect description of DT node...
2018-01-16 Simon Glassbinman: Run code coverage tests
2018-01-16 Simon Glasstravis.yml: Run tests for tools
2018-01-16 Simon Glasstest: Run dtoc tests
2018-01-16 Simon Glasstest: Run buildman tests
2018-01-16 Simon Glasstest: Run patman tests
2018-01-16 Simon Glasstest: Run binman tests
2018-01-16 Tom RiniMerge git://git.denx.de/u-boot-net
2018-01-15 Tom RiniMerge git://git.denx.de/u-boot-imx
2018-01-15 Rob Clarkdb410c: on aarch64 the fdtfile is in per-vendor subdire...
2018-01-15 Rob Clarkdb410c: add reserved-memory node to dts
2018-01-15 Jorge Ramirez... db410c: use the device tree parsed by the lk loader.
2018-01-15 Rob Clarkfdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
2018-01-15 Jorge Ramirez... db410c: replace reset driver with psci
2018-01-15 Jorge Ramirez... db410c: update wlan and bt mac addresses from firmware
2018-01-15 Jorge Ramirez... db410c: configs: increase gunzip buffer size for the...
2018-01-15 Jorge Ramirez... db820c: stop autoboot when vol- pressed
2018-01-15 Jorge Ramirez... db820c: enable pmic gpios for pm8994
2018-01-15 Jorge Ramirez... db820c: add qualcomm dragonboard 820C support
2018-01-15 Jorge Ramirez... arm: mach-snapdragon: refactor clock driver
2018-01-15 Jorge Ramirez... env: enable accessing the environment in an EXT4 partition
2018-01-15 Zhao Qiangphy: atheros: set auto-negotiation for AR8021
2018-01-15 Nobuhiro Iwamatsunet: sh-eth: Add to Kconfig and convert
2018-01-15 Nobuhiro Iwamatsunet: sh-eth: Fix misaligned cache operation warning
2018-01-15 Nobuhiro Iwamatsunet: sh-eth: Change read/write() param to struct sh_eth...
2018-01-15 Nobuhiro Iwamatsunet: sh-eth: Remove bd_t from sh_eth_config()
2018-01-15 Nobuhiro Iwamatsunet: sh-eth: Fix coding style checked by checkpatch.pl
2018-01-15 Joe Hershbergernet: dhcp: Allow "MAY_FAIL" to still try each adapter
2018-01-15 Florian Fainelliconfigs: Update Lamobo_R1 with B53 switch options
2018-01-15 Florian Fainellinet: phy: b53: Add b53_reg read/write commands
2018-01-15 Florian Fainellinet: designware: Pad small packets
2018-01-15 Florian Fainellinet: phy: Add Broadcom BCM53xx switch driver
2018-01-15 Patrice Chotardnet: designware: add clock support
2018-01-15 Patrice Chotarddm: core: add missing dev_count_phandle_with_args()
2018-01-15 Jason Brownnet: mvneta - Fixed recv() when multiple packets have...
2018-01-15 Chris Brandtnet: miiphybb: fix casting error
2018-01-15 Chris Brandtnet: sh-eth: remove sh_eth_offset_rz table
2018-01-15 Chris Brandtnet: sh-eth: fix inl and outl definitions
2018-01-15 Lukasz Majewskinet: phy: marvell: Add functions to read PHY's extended...
2018-01-15 Joe Hershbergernet: Remove nfs.h include from bootp.c
2018-01-15 Joe Hershbergernet: Fix buffer overrun error in netconsole
2018-01-15 Wilson Leenet: macb: Add support for Xilinx Zynq SoC
2018-01-15 Rob Clarkdm: core: parse chosen node
2018-01-15 Jorge Ramirez... poplar: configs: increase gunzip buffer size for the...
2018-01-15 Jorge Ramirez... spmi: msm: display the PMIC Arb version (debug)
next