+++ /dev/null
-build
-bin
-test.out
-weird-files
-weird-files2
-diff
-tmp
-working
-Makefile
+++ /dev/null
-#
-# Makefile for Bacula regression testing
-#
-# Note, Makefile is built from Makefile.in, which you should not really
-# need to change, by envoking:
-#
-# ./config <user's configuration>
-# e.g.
-#
-# ./config kern.conf
-#
-#
-
-# suck in user's configuration
-@CONFIG@
-
-WHICHDB?="--with-sqlite=${SQLITE_DIR}"
-
-first_rule: all
-
-all:
-
-setup: bacula
-
-#
-# Some machines cannot handle the sticky bit and other garbage that
-# is in weird-files, so we load and run it only on Linux machines.
-#
-bacula: all
- @rm -rf bin build weird-files tmp
- (if test x`uname` = xLinux -o x`uname` = xFreeBSD ; then \
- tar xfz weird-files.tar.gz ;\
- fi)
- rm -rf tmp working
- mkdir tmp working
- scripts/setup ${BACULA_SOURCE} ${EMAIL} ${WHICHDB}
- scripts/do_sed ${EMAIL} ${TAPE_DRIVE} ${AUTOCHANGER} ${AUTOCHANGER_PATH}
-
-# Run all non-root userid tests
-test:
- ./all-non-root-tests
-
-# run all file and tape tests
-full_test:
- ./all-tape-and-file-tests
-
-# These tests require you to run as root
-root_test:
- ./all-root-tests
-
-clean:
- scripts/cleanup
- rm -f /tmp/file-list
- rm -f tmp/* working/*
- rm -f test.out
- rm -f diff
- rm -f 1 2 3 scripts/1 scripts/2 scripts/3 tests/1 tests/2 tests/3
-
-# Reset our userid after running as root
-reset:
- chown -R ${USER}:${USER} . tmp working
- scripts/cleanup
- rm -f /tmp/file-list tmp/file-list
- rm -f tmp/* working/*
-
-distclean: clean
- rm -rf bin build weird-files weird-files weird-files2 tmp working
- rm -f scripts/*.conf
-
+++ /dev/null
- Bacula Regression
- Kern Sibbald
- December 2003
-
-This is Bacula's regression script directory. At this time
-(December 2003), it is still in development, so all the tests are
-not complete.
-
-To set it up, create your personal configuration file, by
-copying prototype.conf to xxx.conf or simply editing prototype.conf
-directly.
-
-Then edit your conf file and define appropriate values
-for the variables that are in that file. If you want to see
-a real example, look at kern.conf, but please don't use my
-email address!
-
-Make sure that depkgs is pre-built if it isn't
-already: (cd your-depkgs; make sqlite).
-
-Then do:
-
- ./config xxx.conf
- make setup
-
-You run the above one time. This will build a Makefile from
-Makefile.in and your xxx.conf file, copy the Bacula source,
-configure, build it, and configure all the Bacula scripts
-and conf files. If you change your source, you will need to
-redo this command.
-
-Then you can run any of the tests in the tests subdirectory.
-Each test whose name ends in -root requires you to be root for
-a resonable run. Each test is totally independent of any other
-test. Aside from the required "make setup", each test is totally
-self-initalizing and should clean up after itself.
-
-Not all the tests yet report OK. This is simply because there are
-some spurious differences that I haven't yet taken the time to
-eliminate. The working scrips as of 24 Apr 03 are:
-
-backup-bacula-test
-sparse-test
-compressed-test
-sparse-compressed-test
-two-jobs-test
-wierd-files-test
-verify-vol-test
-
-The tests expect you to execute them from the main regress
-directory!
-
-You can run them individually as:
-
- tests/two-jobs-test
-
-or all non-root tests (my normal testing under my account)
-
- ./all-non-root-tests
-
-or all tests (I only run these before a production release):
-
- su
- ./all-tests
-
-
-after running the root tests, while still root, it is a good idea
-to do:
-
- make reset
-
-this cleans up any files that may be created with root permissions.
-
-If you want to add more tests, do so by putting the shell script
-in the tests subdirectory. Be careful when adding (or better not)
-new clients, pools, and such to the test-bacula-dir.conf.in file
-as it may invalidate a good number of tests, which respond to
-questions by answering with a number (i.e. the order of the selection
-list is known). It might be better to add your own testb-bacula...
-configuration file.
-
-To avoid re-doing a make setup if you have made a change to the
-conf files, and you do not need a new copy of the source, you can simply do:
-
- scripts/do-sed <your-email-address>
-
-Debugging failed tests:
-The simplest thing to do is to edit tests/xxxx where xxxx is the name of
-a or the test that is failing and change all:
-
- @output
-
-to
-
- @tee
-
-re-run the test. The output will display on your terminal. In rare cases,
-for example to get bacula debug output, you might want to remove the
-"2>&1 >/dev/null" from the end of the bin/bacula call or from the end
-of the diff call, assuming you want to "see" the diff output.
-
+++ /dev/null
-#!/bin/sh
-#
-# Run all tape tests
-#
-tests/test0
-tests/two-volume-tape
-tests/incremental-2tape
-echo " "
-echo " "
-echo "2 Tape Test results"
-cat test.out
-scripts/cleanup
+++ /dev/null
-#!/bin/sh
-#
-# Run all tape tests
-#
-tests/test0
-tests/backup-bacula-tape
-tests/small-file-size-tape
-tests/restore-by-file-tape
-tests/incremental-tape
-tests/four-concurrent-jobs-tape
-tests/four-jobs-tape
-tests/fixed-block-size-tape
-tests/bscan-tape
-tests/btape-fill-tape
-echo " "
-echo " "
-echo "Test results"
-cat test.out
-scripts/cleanup
+++ /dev/null
-#!/bin/sh
-#
-# Run all tests
-#
-tests/test0
-tests/backup-bacula-test
-tests/verify-vol-test
-tests/sparse-test
-tests/compressed-test
-tests/sparse-compressed-test
-tests/weird-files-test
-tests/two-jobs-test
-tests/two-vol-test
-tests/six-vol-test
-tests/bscan-test
-tests/weird-files2-test
-tests/concurrent-jobs-test
-tests/four-concurrent-jobs-test
-tests/bsr-opt-test
-tests/bextract-test
-tests/recycle-test
-tests/span-vol-test
-tests/restore-by-file-test
-tests/restore2-by-file-test
-tests/four-jobs-test
-tests/incremental-test
-tests/decremental-test
-tests/restore-disk-seek-test
-tests/query-test
-tests/auto-label-test
-echo " "
-echo " "
-echo "Test results"
-cat test.out
-scripts/cleanup
+++ /dev/null
-#!/bin/sh
-#
-# Run all root tests
-#
-rm -f test.out
-tests/dev-test-root
-tests/etc-test-root
-tests/lib-test-root
-tests/usr-tape-root
-cat test.out
-scripts/cleanup
+++ /dev/null
-#!/bin/sh
-#
-# Run all tests
-#
-./all-non-root-tests
-./all-non-root-tape-tests
+++ /dev/null
-#!/bin/sh
-#
-# Run all tests
-#
-./all-non-root-tests
-./all-root-tests
-cat test.out
-scripts/cleanup
+++ /dev/null
-#/bin/sh
-#
-# First argument is expected to be a user's configuration file
-#
-if ! test -e $1 ; then
- echo "Arg1 must specify a config file (e.g. prototype.conf)"
- exit 1
-fi
-sed -e "/@CONFIG@/r $1" -e "s/@CONFIG@//" Makefile.in >Makefile
+++ /dev/null
-#!/bin/sh
-make setup
-./all-tape-and-file-tests
+++ /dev/null
-#!/bin/sh
-make setup
-./all-non-root-tape-tests
+++ /dev/null
-#!/bin/sh
-./all-non-root-tests
+++ /dev/null
-# Where to get the source to be tested
-BACULA_SOURCE="${HOME}/bacula/k"
-
-# Where to send email !!!!! Change me !!!!!!!
-EMAIL=kern@sibbald.com
-
-# Full "default" path where to find sqlite (no quotes!)
-SQLITE_DIR=${HOME}/bacula/depkgs/sqlite
-
-TAPE_DRIVE="/dev/nst0"
-# if you don't have an autochanger set AUTOCHANGER to /dev/null
-AUTOCHANGER="/dev/sg0"
-
-# This must be the path to the autochanger including its name
-AUTOCHANGER_PATH="/usr/local/bin/mtx"
+++ /dev/null
-#
-# Prototype personal configuration file for the regression
-# scripts. Either edit this file directly, or better copy
-# it elsewhere so it won't get overwritten.
-#
-
-#
-# Where to get the source to be tested
-#
-BACULA_SOURCE=
-
-# Where to send email messages
-#
-EMAIL=
-
-# Full "default" path where to find sqlite.
-# This is only used if you do not specify a database override on the
-# make command.
-#
-# N.B. DON'T PUT QOUTES AROUND THE PATH.
-#
-SQLITE_DIR=${HOME}/bacula/depkgs/sqlite
-
-#
-# The device name of your tape drive if you have one
-#
-TAPE_DRIVE=/dev/nst0
-
-#
-# if you don't have an autochanger set AUTOCHANGER to /dev/null
-#
-AUTOCHANGER=/dev/sg0
-
-#
-# This must be the path to the autochanger including its name
-#
-AUTOCHANGER_PATH=/bin/mtx
+++ /dev/null
-new-test-bacula-dir.conf
-bacula-dir.conf
-bacula-fd.conf
-bacula-sd.conf
-console.conf
-bconsole.conf
-test-bacula-dir.conf
-test-bacula-fd.conf
-test-bacula-sd.conf
-test-console.conf
-testa-bacula-dir.conf
-bacula-dir-tape.conf
-bacula-sd-tape.conf
-bacula-sd-2tape.conf
-cleanup-tape
-cleanup-2tape
-prepare-two-tapes
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.33
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
- Messages = Standard
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-}
-
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include = signature=MD5 {
- </tmp/file-list
- }
-}
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definition of DDS tape storage device
-Storage {
- Name = DDS-4
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
- Device = DDS-4 # must be same as Device in Storage daemon
- Media Type = DDS-4 # must be same as MediaType in Storage daemon
- AutoChanger = yes
- Maximum Concurrent Jobs = 4
-}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all, !terminate
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
- Accept Any Volume = yes # write on any volume in the pool
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-
-Device {
- Name = DDS-4 #
- Media Type = DDS-4
- Changer Device = @autochanger@
- Changer Command ="@scriptdir@/mtx-changer %c %o %S %a"
- Archive Device = @tape_drive@
- AutomaticMount = yes; # when device opened, read it
- AlwaysOpen = yes;
- RemovableMedia = yes;
- @@sbindir@/tape_options
-# Maximum File Size = 1000000
-}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-
-Device {
- Name = DDS-4 #
- Media Type = DDS-4
- Archive Device = @tape_drive@
- AutomaticMount = yes; # when device opened, read it
- AlwaysOpen = yes;
- RemovableMedia = yes;
- @@sbindir@/tape_options
-# Maximum File Size = 1000000
-# MaximumVolumeSize = 100M
-}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = rufus-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "/home/kern/bacula/regress/working"
- Pid Directory = "/home/kern/bacula/regress/working"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = rufus-dir
- Password = "BzlEl8haeFmnv/Lv8V6zDzUBgFFQNsUtny6VkmccQpOy"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-
-Device {
- Name = FileStorage
- Media Type = File
- Archive Device = @tmpdir@
- LabelMedia = yes; # lets Bacula label unlabeled media
- Random Access = Yes;
- AutomaticMount = yes; # when device opened, read it
- RemovableMedia = no;
- AlwaysOpen = no;
-}
-
-#Device {
-# Name = DDS-4 #
-# Media Type = DDS-4
-# Archive Device = /dev/nst0
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = yes;
-# RemovableMedia = yes;
-#}
-
-#
-# A very old Exabyte with no end of media detection
-#
-#Device {
-# Name = "Exabyte 8mm"
-# Media Type = "8mm"
-# Archive Device = /dev/nst0
-# Hardware end of medium = No;
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = Yes;
-# RemovableMedia = yes;
-#}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = rufus-dir = all, !terminate
-}
+++ /dev/null
-#!/bin/sh
-#
-# Check for zombie jobs (not terminated).
-# Also scan logs for ERROR messages
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output tmp/dir.out
-status dir
-@output tmp/fd.out
-status client
-@output tmp/sd.out
-status $1
-@output
-quit
-END_OF_DATA
-grep "No Jobs running." tmp/dir.out 2>&1 >/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " !!!! Zombie Jobs in Director !!!!"
- echo " !!!! Zombie Jobs in Director !!!!" >>test.out
- echo " "
-fi
-grep "No Jobs running." tmp/fd.out 2>&1 >/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " !!!! Zombie Jobs in File daemon !!!!"
- echo " !!!! Zombie Jobs in File daemon !!!!" >>test.out
- echo " "
-fi
-grep "No Jobs running." tmp/sd.out 2>&1 >/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " !!!! Zombie Jobs in Storage daemon !!!!"
- echo " !!!! Zombie Jobs in Storage daemon !!!!" >>test.out
- echo " "
-fi
-grep "ERROR" tmp/log*.out 2>&1 >/dev/null
-if [ $? = 0 ] ; then
- echo " "
- echo " !!!! ERROR in log output !!!!"
- echo " !!!! ERROR in log output !!!!" >>test.out
- echo " "
-fi
-grep "Fatal Error" tmp/log*.out 2>&1 >/dev/null
-if [ $? = 0 ] ; then
- echo " "
- echo " !!!! Fatal Error in log output !!!!"
- echo " !!!! Fatal Error in log output !!!!" >>test.out
- echo " "
-fi
-
-
+++ /dev/null
-#!/bin/sh
-#
-# Cleanup left over files -- both before and after test run
-#
-rm -rf /tmp/TestVolume001 /tmp/bacula-restores /tmp/Small*
-rm -rf tmp/original tmp/bacula-restores tmp/Small* tmp/TestVolume*
-rm -rf tmp/restored tmp/largefile tmp/bscan.bsr tmp/log*.out
-rm -rf /tmp/sed_tmp /tmp/file-list
-rm -rf tmp/build tmp/restore-list tmp/restore2-list
-rm -rf tmp/fd.out tmp/dir.out tmp/sd.out
-rm -rf working/log tmp/TEST-*
-
-bin/bacula stop 2>&1 >/dev/null
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges >/dev/null 2>&1
-cd ..
+++ /dev/null
-#!/bin/sh
-#
-# Cleanup left over files -- both before and after test run
-#
-scripts/cleanup
-
-if ! test x@autochanger@ = x/dev/null; then
- drive=`bin/mtx-changer @autochanger@ loaded`
- if ! test x$drive = x2; then
- bin/mtx-changer @autochanger@ unload
- bin/mtx-changer @autochanger@ load 2
- fi
- mt -f @tape_drive@ rewind
- mt -f @tape_drive@ weof
-fi
-
-
-#
-# If we have an autochanger always load tape in slot 1
-#
-if ! test x@autochanger@ = x/dev/null; then
- drive=`bin/mtx-changer @autochanger@ loaded`
- if ! test x$drive = x1; then
- bin/mtx-changer @autochanger@ unload
- bin/mtx-changer @autochanger@ load 1
- fi
-fi
-
-mt -f @tape_drive@ rewind
-mt -f @tape_drive@ weof
+++ /dev/null
-#!/bin/sh
-#
-# Cleanup left over files -- both before and after test run
-#
-scripts/cleanup
-
-mt -f @tape_drive@ rewind
-mt -f @tape_drive@ weof
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/bacula-dir-tape.conf bin/bacula-dir.conf
-/bin/cp -f scripts/bacula-sd-2tape.conf bin/bacula-sd.conf
-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/bacula-dir.conf bin/bacula-dir.conf
-/bin/cp -f scripts/bacula-sd.conf bin/bacula-sd.conf
-/bin/cp -f scripts/bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/bconsole.conf bin/bconsole.conf
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/bacula-dir-tape.conf bin/bacula-dir.conf
-/bin/cp -f scripts/bacula-sd-tape.conf bin/bacula-sd.conf
-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/new-test-bacula-dir.conf bin/bacula-dir.conf
-/bin/cp -f scripts/test-bacula-sd.conf bin/bacula-sd.conf
-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/testa-bacula-dir.conf bin/bacula-dir.conf
-/bin/cp -f scripts/test-bacula-sd.conf bin/bacula-sd.conf
-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
+++ /dev/null
-#!/bin/sh
-#
-if test $# != 4 ; then
- echo "First arg must be email name"
- echo " and the second must be a tape drive"
- echo " and the third must be a tape control name or /dev/null"
- echo " and the fourth must be the full path to the mtx program"
- exit 1
-fi
-out="/tmp/sed_tmp"
-cwd=`pwd`
-host=`hostname | tr '.' ' ' | cut -f 1 -d ' '`
-if test x$host = x ; then
- host=localhost
-fi
-# Create sed command script
-echo "s%@sbindir@%${cwd}/bin%g" >${out}
-echo "s%@scriptdir@%${cwd}/bin%g" >>${out}
-echo "s%@working_dir@%${cwd}/working%g" >>${out}
-echo "s%@piddir@%${cwd}/working%g" >>${out}
-echo "s%@subsysdir@%${cwd}/working%g" >>${out}
-echo "s%@job_email@%${1}%g" >>${out}
-echo "s%@tape_drive@%${2}%g" >>${out}
-echo "s%@autochanger@%${3}%g" >>${out}
-echo "s%@tmpdir@%${cwd}/tmp%g" >>${out}
-echo "s%@hostname@%${host}%g" >>${out}
-echo "s%@changer_path@%${4}%g" >>${out}
-
-# process .in files with sed script
-sed -f ${out} ${cwd}/scripts/test-bacula-dir.conf.in >${cwd}/scripts/test-bacula-dir.conf
-sed -f ${out} ${cwd}/scripts/new-test-bacula-dir.conf.in >${cwd}/scripts/new-test-bacula-dir.conf
-sed -f ${out} ${cwd}/scripts/testa-bacula-dir.conf.in >${cwd}/scripts/testa-bacula-dir.conf
-sed -f ${out} ${cwd}/scripts/test-bacula-fd.conf.in >${cwd}/scripts/test-bacula-fd.conf
-sed -f ${out} ${cwd}/scripts/test-bacula-sd.conf.in >${cwd}/scripts/test-bacula-sd.conf
-sed -f ${out} ${cwd}/scripts/test-console.conf.in >${cwd}/scripts/test-console.conf
-sed -f ${out} ${cwd}/scripts/bacula-dir-tape.conf.in >${cwd}/scripts/bacula-dir-tape.conf
-sed -f ${out} ${cwd}/scripts/bacula-sd-tape.conf.in >${cwd}/scripts/bacula-sd-tape.conf
-sed -f ${out} ${cwd}/scripts/bacula-sd-2tape.conf.in >${cwd}/scripts/bacula-sd-2tape.conf
-sed -f ${out} ${cwd}/scripts/cleanup-tape.in >${cwd}/scripts/cleanup-tape
-sed -f ${out} ${cwd}/scripts/cleanup-2tape.in >${cwd}/scripts/cleanup-2tape
-sed -f ${out} ${cwd}/scripts/prepare-two-tapes.in >${cwd}/scripts/prepare-two-tapes
-cp ${cwd}/bin/bacula-sd.conf /tmp/bac$$
-sed s%/tmp%${cwd}/tmp%g /tmp/bac$$ >${cwd}/bin/bacula-sd.conf
-chmod 777 ${cwd}/scripts/cleanup-*tape ${cwd}/scripts/prepare-two-tapes
-rm -f /tmp/bac$$
-cp ${cwd}/bin/mtx-changer /tmp/bac$$
-sed "s%^MTX.*$%MTX=${4}%g" /tmp/bac$$ >${cwd}/bin/mtx-changer
-chmod 777 ${cwd}/bin/mtx-changer
-
-# get proper SD tape definitions
-if test x`uname` = xLinux ; then \
- cp -f scripts/linux_tape_options bin/tape_options ; \
-fi
-if test x`uname` = xFreeBSD ; then \
- cp -f scripts/freebsd_tape_options bin/tape_options ; \
-fi
-
-rm -f ${out}
-rm -f /tmp/bac$$
+++ /dev/null
-dev/ptmx
-dev/pts
-dev/rd/c5d2
-dev/rd
-dev/shm
+++ /dev/null
-etc/mail/statistics
+++ /dev/null
-lib/ld-2.2.5.so
-lib/libtermcap.so.2.0.8
-lib/libc-2.2.5.so
-lib/libnsl-2.2.5.so
-lib/libnss_files-2.2.5.so
+++ /dev/null
-/build/doc/bacula.pdf
-/build/configure
-/build/src/stored/bextract
-/build/src/tools/testfind
-/build/Makefile.in
-/build/src/dird/bacula-dir
-/build/src/console/bconsole
-/build/src/filed/bacula-fd
-/build/src/findlib/find_one.c
-/build/src/jcr.h
-/build/platforms/Makefile.in
-/build/platforms/redhat/Makefile.in
-/build/scripts/Makefile.in
-/build/src/filed/win32/bin/cygwin1.dll
-/build/src/filed/win32/winservice.cpp
-/build/src/filed/restore.c
+++ /dev/null
-#
-# FreeBSD tape drive options
-#
-Hardware End of Medium = no
-Fast Forward Space File = no
-BSF at EOM = yes
-Backward Space Record = no
-TWO EOF = yes
+++ /dev/null
- Minimum Block Size = 32768
- Maximum Block Size = 32768
- Hardware End of Medium = yes
- BSF at EOM = yes
- Fast Forward Space File = yes
- Two EOF = no
-
+++ /dev/null
-# nothing needed for Linux
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.33
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- SubSysDirectory = "@subsysdir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3" # Console password
- Messages = Standard
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData=yes
-}
-
-Job {
- Name = "MonsterSave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File1
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-Job {
- Name = "VerifyVolume"
- Type = Verify
- Level = VolumeToCatalog
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-Job {
- Name = "SparseTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="SparseSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-Job {
- Name = "CompressedTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="CompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Maximum Concurrent Jobs = 4
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-Job {
- Name = "SparseCompressedTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="SparseCompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-# Backup the catalog database (after the nightly save)
-Job {
- Name = "BackupCatalog"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Catalog"
-# Schedule = "WeeklyCycleAfterBackup"
- Storage = File
- Messages = Standard
- Pool = Default
- # This creates an ASCII copy of the catalog
- RunBeforeJob = "@sbindir@/make_catalog_backup -u bacula"
- # This deletes the copy of the catalog
- RunAfterJob = "@sbindir@/delete_catalog_backup"
- Write Bootstrap = "@working_dir@/BackupCatalog.bsr"
-}
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include = signature=MD5 {
- </tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseSet"
- Include {
- Options {
- signature=MD5 sparse=yes
- }
- File = </tmp/file-list
- }
-}
-
-FileSet {
- Name = "CompressedSet"
- Include {
- Options {
- signature=MD5 compression=GZIP
- }
- File = </tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseCompressedSet"
- Include {
- Options {
- signature=MD5 compression=GZIP
- }
- File = </tmp/file-list
- }
-}
-
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# This schedule does the catalog. It starts after the WeeklyCycle
-Schedule {
- Name = "WeeklyCycleAfterBackup"
- Run = Full sun-sat at 1:10
-}
-
-# This is the backup of the catalog
-FileSet {
- Name = "Catalog"
- Include {
- Options {
- signature=MD5
- }
- File = /home/kern/bacula/regress/bin/working/bacula.sql
- }
-}
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definiton of file storage device
-Storage {
- Name = File
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage
- Media Type = File
- Maximum Concurrent Jobs = 4
-}
-
-Storage {
- Name = File1
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage1
- Media Type = File1
- Maximum Concurrent Jobs = 4
-}
-
-
-# Definition of DLT tape storage device
-#Storage {
-# Name = DLTDrive
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = "HP DLT 80" # must be same as Device in Storage daemon
-# Media Type = DLT8000 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of DDS tape storage device
-#Storage {
-# Name = SDT-10000
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = SDT-10000 # must be same as Device in Storage daemon
-# Media Type = DDS-4 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of 8mm tape storage device
-#Storage {
-# Name = "8mmDrive"
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-# Device = "Exabyte 8mm"
-# MediaType = "8mm"
-#}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-Messages {
- Name = NoEmail
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- console = all, !skipped, !terminate
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
- Accept Any Volume = yes # write on any volume in the pool
-# Label Format = "TEST-${Year}-${Month:p/2/0/r}-${Day:p/2/0/r}:${NumVols}"
-}
+++ /dev/null
-#!/bin/sh
-#
-# Create two blank tapes
-#
-@changer_path@ -f @autochanger@ unload
-@changer_path@ -f @autochanger@ load 1
-mt -f @tape_drive@ rewind
-mt -f @tape_drive@ weof
-@changer_path@ -f @autochanger@ unload
-@changer_path@ -f @autochanger@ load 2
-mt -f @tape_drive@ rewind
-mt -f @tape_drive@ weof
-@changer_path@ -f @autochanger@ unload
+++ /dev/null
-#!/bin/sh
-#
-# This is the configuration script for regression testing
-#
-
-CFLAGS="-g -O2 -Wall" \
- ./configure \
- --sbindir=$1/bin \
- --sysconfdir=$1/bin \
- --with-pid-dir=$1/working \
- --with-subsys-dir=$1/working \
- --enable-smartalloc \
- --disable-readline \
- --with-working-dir=$1/working \
- --with-dump-email=$2 \
- --with-job-email=$2 \
- $3 \
- --with-baseport=8101 \
- $4
-
-exit 0
+++ /dev/null
-#!/bin/sh
-#
-# Script to setup running Bacula regression tests
-#
-cwd=`pwd`
-if [ $# != 4 ] ; then
- echo "Incorrect number of arguments. Got $#. Need:"
- echo "setup bacula-src email-address --with-DBNAME --with-tcp-wrappers"
- echo " "
- exit 1
-fi
-if [ ! -d $1 ] ; then
- echo "Arg 1 must be a Bacula release directory."
- echo " "
- exit 1
-fi
-rm -rf build bin
-# Copy new source
-echo "Copying source from $1"
-cp -rp $1 build
-cp scripts/regress-config build
-cd build
-rm -f Makefile config.cache
-# Run Bacula configuration, make, install
-./regress-config ${cwd} $2 $3 $4
-make
-make install
-cp src/tools/testls ../bin
-
-cd ..
-bin/bacula stop
-cd bin
-./create_bacula_database
-./drop_bacula_tables
-./make_bacula_tables
-./grant_bacula_privileges
-cd ..
-# Start and stop Bacula to ensure conf files are OK
-bin/bacula start
-bin/bacula stop
-#
-# Save Bacula default conf files for later use
-#
-cp -f bin/*.conf scripts
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.33
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- SubSysDirectory = "@subsysdir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3" # Console password
- Messages = Standard
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData=yes
-}
-
-Job {
- Name = "MonsterSave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File1
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-Job {
- Name = "VerifyVolume"
- Type = Verify
- Level = VolumeToCatalog
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-Job {
- Name = "SparseTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="SparseSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-Job {
- Name = "CompressedTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="CompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Maximum Concurrent Jobs = 4
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-Job {
- Name = "SparseCompressedTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="SparseCompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-# Backup the catalog database (after the nightly save)
-Job {
- Name = "BackupCatalog"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Catalog"
-# Schedule = "WeeklyCycleAfterBackup"
- Storage = File
- Messages = Standard
- Pool = Default
- # This creates an ASCII copy of the catalog
- RunBeforeJob = "@sbindir@/make_catalog_backup -u bacula"
- # This deletes the copy of the catalog
- RunAfterJob = "@sbindir@/delete_catalog_backup"
- Write Bootstrap = "@working_dir@/BackupCatalog.bsr"
-}
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include = signature=MD5 {
- </tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseSet"
- Include = signature=MD5 sparse=yes {
- </tmp/file-list
- }
-}
-
-FileSet {
- Name = "CompressedSet"
- Include = signature=MD5 compression=GZIP {
- </tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseCompressedSet"
- Include = signature=MD5 compression=GZIP {
- </tmp/file-list
- }
-}
-
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# This schedule does the catalog. It starts after the WeeklyCycle
-Schedule {
- Name = "WeeklyCycleAfterBackup"
- Run = Full sun-sat at 1:10
-}
-
-# This is the backup of the catalog
-FileSet {
- Name = "Catalog"
- Include = signature=MD5 {
- /home/kern/bacula/regress/bin/working/bacula.sql
- }
-}
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definiton of file storage device
-Storage {
- Name = File
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage
- Media Type = File
- Maximum Concurrent Jobs = 4
-}
-
-Storage {
- Name = File1
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage1
- Media Type = File1
- Maximum Concurrent Jobs = 4
-}
-
-
-# Definition of DLT tape storage device
-#Storage {
-# Name = DLTDrive
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = "HP DLT 80" # must be same as Device in Storage daemon
-# Media Type = DLT8000 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of DDS tape storage device
-#Storage {
-# Name = SDT-10000
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = SDT-10000 # must be same as Device in Storage daemon
-# Media Type = DDS-4 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of 8mm tape storage device
-#Storage {
-# Name = "8mmDrive"
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-# Device = "Exabyte 8mm"
-# MediaType = "8mm"
-#}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-Messages {
- Name = NoEmail
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- console = all, !skipped, !terminate
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
- Accept Any Volume = yes # write on any volume in the pool
-}
+++ /dev/null
-#
-# Default Bacula File Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# There is not much to change here except perhaps the
-# File daemon Name to
-#
-
-#
-# List Directors who are permitted to contact this File daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc"
-}
-
-#
-# "Global" File daemon configuration specifications
-#
-FileDaemon { # this is me
- Name = @hostname@-fd
- FDport = 8102 # where we listen for the director
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- SubSys Directory = "@subsysdir@"
-}
-
-# Send all messages except skipped files back to Director
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-
-Device {
- Name = FileStorage
- Media Type = File
- Archive Device = @tmpdir@
- LabelMedia = yes; # lets Bacula label unlabelled media
- Random Access = Yes;
- AutomaticMount = yes; # when device opened, read it
- RemovableMedia = no;
- AlwaysOpen = no;
-# Maximum File Size = 10KB
-}
-
-Device {
- Name = FileStorage1
- Media Type = File1
- Archive Device = @tmpdir@
- LabelMedia = yes; # lets Bacula label unlabelled media
- Random Access = Yes;
- AutomaticMount = yes; # when device opened, read it
- RemovableMedia = no;
- AlwaysOpen = no;
-}
-
-
-#Device {
-# Name = "HP DLT 80"
-# Media Type = DLT8000
-# Archive Device = /dev/nst0
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = yes;
-# RemovableMedia = yes;
-#}
-
-#Device {
-# Name = SDT-7000 #
-# Media Type = DDS-2
-# Archive Device = /dev/nst0
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = yes;
-# RemovableMedia = yes;
-#}
-
-#Device {
-# Name = Floppy
-# Media Type = Floppy
-# Archive Device = /mnt/floppy
-# RemovableMedia = yes;
-# Random Access = Yes;
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = no;
-#}
-
-#
-# A very old Exabyte with no end of media detection
-#
-#Device {
-# Name = "Exabyte 8mm"
-# Media Type = "8mm"
-# Archive Device = /dev/nst0
-# Hardware end of medium = No;
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = Yes;
-# RemovableMedia = yes;
-#}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Bacula User Agent (or Console) Configuration File
-#
-
-Director {
- Name = @hostname@-dir
- DIRport = 8101
- address = @hostname@
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
-}
+++ /dev/null
-#
-# TestA Bacula Director Configuration file
-#
-# For Bacula release 1.30 (12 April 2003) -- redhat 7.3
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- SubSysDirectory = "@subsysdir@"
- Maximum Concurrent Jobs = 1
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3" # Console password
- Messages = Standard
-}
-
-
-Job {
- Name = "MultiVol"
- Type = Backup
- Client=@hostname@-fd
- Level = Full
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Write Bootstrap = "@working_dir@/SmallVols.bsr"
- Pool = SmallVols
- SpoolData = yes
-}
-
-
-Job {
- Name = "VerifyVolume"
- Type = Verify
- Level = VolumeToCatalog
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include = signature=SHA1 {
- </tmp/file-list
- }
-}
-
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
-}
-
-# Definiton of file storage device
-Storage {
- Name = File
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage
- Media Type = File
-}
-
-Storage {
- Name = File1
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage1
- Media Type = File1
-}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all, !terminate
- operator = @job_email@ = mount
- console = all, !skipped, !terminate
-
- append = "@working_dir@/log" = all, !skipped
-}
-
-Messages {
- Name = NoEmail
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- console = all, !skipped, !terminate, !restored
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
- Accept Any Volume = yes # write on any volume in the pool
-}
-
-Pool {
- Name = SmallVols
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
- Accept Any Volume = yes # write on any volume in the pool
- Maximum Volumes = 10
- MaximumVolumeBytes = 10M
- LabelFormat = Small
-}
+++ /dev/null
-#!/bin/sh
-./all-non-root-tape-tests
+++ /dev/null
-#!/bin/sh
-#
-# Test if Bacula can automatically create a Volume label.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-
-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1
-sed "s%# Label Format% Label Format%" ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf
-
-echo " "
-echo " "
-echo " === Starting auto-label-test ==="
-echo " === Starting auto-label-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-status all
-status all
-list pools
-messages
-@output tmp/log1.out
-run job=CompressedTest storage=File yes
-list pools
-list volumes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! auto-label-test failed!!! !!!!! "
- echo " !!!!! auto-label-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== auto-label-test OK ===== "
- echo " ===== auto-label-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape then restore it, we do that twice to ensure that
-# we can correctly append to a tape.
-#
-cwd=`pwd`
-scripts/copy-tape-confs
-scripts/cleanup-tape
-
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting Bacula tape test ==="
-echo " === Starting Bacula tape test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-#
-# Now do a second backup after making a few changes
-#
-touch ${cwd}/build/src/dird/*.c
-echo "test test" > ${cwd}/build/src/dird/xxx
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a second restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! Bacula tape test Bacula source failed!!! !!!!! "
- echo " !!!!! Bacula tape test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== Bacula tape test Bacula source OK ===== "
- echo " ===== Bacula tape test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-cwd=`pwd`
-scripts/copy-confs
-scripts/cleanup
-
-echo " "
-echo " "
-echo " === Starting Backup Bacula Test ==="
-echo " === Starting Backup Bacula Test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label volume=TestVolume001
-run job=Client1 yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! Backup Bacula Test failed!!! !!!!! "
- echo " !!!!! Backup Bacula Test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== Backup Bacula Test OK ===== "
- echo " ===== Backup Bacula Test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory but
-# split the archive into two volumes, then build a BSR with
-# the restore command and use bextract to restore the files.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting bextract-test ==="
-echo " === Starting bextract-test ===" >working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File1 volume=TestVolume001
-label storage=File1 volume=TestVolume002
-update Volume=TestVolume001 MaxVolBytes=3000000
-run job=NightlySave storage=File1 yes
-wait
-messages
-@#
-@# now build the bsr file
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=File1 done
-no
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File1
-bin/bacula stop 2>&1 >/dev/null
-mkdir -p ${cwd}/tmp/bacula-restores
-bin/bextract -b working/restore.bsr -c bin/bacula-sd.conf ${cwd}/tmp ${cwd}/tmp/bacula-restores 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! bextract-test Bacula source failed!!! !!!!! "
- echo " !!!!! bextract-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== bextract-test Bacula source OK ===== "
- echo " ===== bextract-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup four times, each with incremental then
-# do a bscan and restore.
-# It should require at least 4 different bsrs.
-#
-cwd=`pwd`
-scripts/copy-tape-confs
-scripts/cleanup-tape
-echo "${cwd}/build" >/tmp/file-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-echo " "
-echo " "
-echo " === Starting bscan-tape ==="
-echo " === Starting bscan-tape ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA 2>&1 >/dev/null
-@output /dev/null
-estimate job=NightlySave listing
-estimate job=NightlySave listing
-estimate job=NightlySave listing
-messages
-@output tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0
-run job=NightlySave yes
-wait
-run job=NightlySave level=Full yes
-wait
-run job=NightlySave level=Full yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 1 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/dird/*.c ${cwd}/build/src/dird/*.o
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-
-#
-# run a second job
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA 2>&1 >/dev/null
-@output /dev/null
-messages
-@output tmp/log1.out
-run job=NightlySave level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 2 done"
-touch ${cwd}/build/src/dird/*.c
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#
-# run a third job
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA 2>&1 >/dev/null
-@output /dev/null
-messages
-@output tmp/log1.out
-run job=NightlySave level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 3 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#echo "abc" > ${cwd}/build/src/lib/dummy
-#
-# run a fourth job
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA 2>&1 >/dev/null
-@output /dev/null
-messages
-@output tmp/log1.out
-run job=NightlySave level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 4 done"
-#
-# now drop and recreate the database
-#
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges 2>&1 >/dev/null
-cd ..
-
-bin/bacula stop 2>&1 >/dev/null
-echo "volume=TestVolume001" >tmp/bscan.bsr
-bin/bscan -w working -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf DDS-4 2>&1 >/dev/null
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log2.out
-@#
-@# now do a restore
-@#
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-rm -f ${cwd}/build/src/lib/dummy
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! bscan-tape Bacula source failed!!! !!!!! "
- echo " !!!!! bscan-tape failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== bscan-tape Bacula source OK ===== "
- echo " ===== bscan-tape OK ===== " >>test.out
-# scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory but
-# split the archive into two volumes then bscan it
-# into the catalog after the backup. It also to a limited
-# extent tests the purge volume and delete volume commands.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting bscan-test ==="
-echo " === Starting bscan-test ===" >working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File1
-TestVolume001
-label storage=File1
-TestVolume002
-update Volume=TestVolume001 MaxVolBytes=3000000
-run job=NightlySave storage=File1
-yes
-wait
-messages
-@output /dev/null
-@#
-@# now purge the Volume
-@#
-purge volume=TestVolume001
-purge volume=TestVolume002
-delete volume=TestVolume001
-yes
-delete volume=TestVolume002
-yes
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File1
-bin/bacula stop 2>&1 >/dev/null
-echo "volume=TestVolume001|TestVolume002" >tmp/bscan.bsr
-bin/bscan -w working -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf ${cwd}/tmp 2>&1 >/dev/null
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log2.out
-@#
-@# now do a restore
-@#
-restore where=${cwd}/tmp/bacula-restores select all storage=File1 done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File1
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! bscan-test Bacula source failed!!! !!!!! "
- echo " !!!!! bscan-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== bscan-test Bacula source OK ===== "
- echo " ===== bscan-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory but
-# split the archive into two volumes, then restore
-# files on only one of the volumes and ensure that
-# the other volume is not used. I.e. bsr optimization
-# works.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting bsr-opt-test ==="
-echo " === Starting bsr-opt-test ===" >working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File1 volume=TestVolume001
-label storage=File1 volume=TestVolume002
-update Volume=TestVolume001 MaxVolBytes=3000000
-run job=NightlySave storage=File1 yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File1
-unmark *
-cd ${cwd}/build/src/cats
-mark *
-ls
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File1
-bin/bacula stop 2>&1 >/dev/null
-#
-# This test is not really reliable. What we want to do is
-# to select files on only one Volume, then insure here
-# that only one Volume is chosen.
-#
-grep TestVolume002 working/restore.bsr 2>&1 >/dev/null
-bsrstat=$?
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build/src/cats tmp/bacula-restores${cwd}/build/src/cats 2>&1 >/dev/null
-if [ $? != 0 -o $bsrstat != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! bsr-opt-test Bacula source failed!!! !!!!! "
- echo " !!!!! bsr-opt-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== bsr-opt-test Bacula source OK ===== "
- echo " ===== bsr-opt-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Test the fill command in btape
-#
-cwd=`pwd`
-scripts/copy-tape-confs
-scripts/cleanup-tape
-
-echo " "
-echo " "
-echo " === Starting btape fill test ==="
-echo " === Starting btape fill test ===" >>working/log
-echo " "
-
-bin/btape -c bin/bacula-sd.conf DDS-4 <<END_OF_DATA 2>&1 >tmp/log1.out
-fill
-s
-
-quit
-END_OF_DATA
-
-
-grep "^The last block on the tape matches\. Test succeeded\." tmp/log1.out 2>&1 >/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! btape fill test failed!!! !!!!! "
- echo " !!!!! btape fill test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== btape fill test OK ===== "
- echo " ===== btape fill test OK ===== " >>test.out
-# scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Test the fill command in btape
-#
-cwd=`pwd`
-scripts/copy-tape-confs
-scripts/cleanup-tape
-
-echo "${cwd}/build" >/tmp/file-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# MaximumVolumeSize% MaximumVolumeSize%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-echo " "
-echo " "
-echo " === Starting btape fill test ==="
-echo " === Starting btape fill test ===" >>working/log
-echo " "
-
-bin/btape -c bin/bacula-sd.conf DDS-4 <<END_OF_DATA 2>&1 >tmp/log1.out
-fill
-s
-
-quit
-END_OF_DATA
-
-
-grep "^The last block on the tape matches\. Test succeeded\." tmp/log1.out 2>&1 >/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! btape fill test failed!!! !!!!! "
- echo " !!!!! btape fill test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== btape fill test OK ===== "
- echo " ===== btape fill test OK ===== " >>test.out
-# scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then restore it.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting compressed-test ==="
-echo " === Starting compressed-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-status all
-status all
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=CompressedTest storage=File yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! compressed-test Bacula source failed!!! !!!!! "
- echo " !!!!! compressed-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== compressed-test Bacula source OK ===== "
- echo " ===== compressed-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run two jobs at the same time
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/tmp/largefile" >/tmp/file-list
-if test -c /dev/urandom ; then
-# Create 56MB file with random data
- echo "Creating a 56MB file with random data ..."
- dd if=/dev/urandom of=${cwd}/tmp/largefile bs=1024 count=55000
-else
- echo "Creating a 56MB file with bacula-dir data ..."
- dd if=bin/bacula-dir of=${cwd}/tmp/1 bs=1024 count=1000
- cat ${cwd}/tmp/1 ${cwd}/tmp/1 ${cwd}/tmp/1 ${cwd}/tmp/1 ${cwd}/tmp/1 >${cwd}/tmp/2
- rm -f ${cwd}/tmp/1
- cat ${cwd}/tmp/2 ${cwd}/tmp/2 ${cwd}/tmp/2 ${cwd}/tmp/2 ${cwd}/tmp/2 >>${cwd}/tmp/3
- rm -f ${cwd}/tmp/2
- cat ${cwd}/tmp/3 ${cwd}/tmp/3 ${cwd}/tmp/3 ${cwd}/tmp/3 ${cwd}/tmp/3 >${cwd}/tmp/largefile
- rm -f ${cwd}/tmp/3
-fi
-
-echo "largefile created"
-
-echo " "
-echo " "
-echo " === Starting concurrent-jobs-test ==="
-echo " === Starting concurrent-jobs-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=CompressedTest level=Full yes
-run job=CompressedTest level=Full yes
-run job=CompressedTest level=Full yes
-run job=CompressedTest level=Full yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff tmp/largefile tmp/bacula-restores${cwd}/tmp/largefile 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! concurrent-jobs-test Bacula source failed!!! !!!!! "
- echo " !!!!! concurrent-jobs-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== concurrent-jobs-test Bacula source OK ===== "
- echo " ===== concurrent-jobs-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do a Decremental and restore those two files.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/tmp/build" >/tmp/file-list
-mkdir ${cwd}/tmp/build
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-echo " "
-echo " "
-echo " === Starting decremental-test ==="
-echo " === Starting decremental-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-label storage=File volume=TestVolume002
-run job=CompressedTest yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-@# Force decremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-run level=decremental job=CompressedTest yes
-wait
-messages
-@output
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run level=incremental job=CompressedTest yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=File file=<${cwd}/tmp/restore-list
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-diff -r tmp/build tmp/bacula-restores${cwd}/tmp/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! decremental-test Bacula source failed!!! !!!!! "
- echo " !!!!! decremental-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== decremental-test Bacula source OK ===== "
- echo " ===== decremental-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-MUID=`/usr/bin/id -u`
-if [ $MUID != 0 ] ; then
- echo " "
- echo "You must be root to run this test."
- echo " ===== !!!! dev-test-root not run !!!! ===== "
- echo " ===== !!!! dev-test-root not run !!!! ===== " >>test.out
- echo " "
- exit 1
-fi
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "/dev" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting dev-test-root test ==="
-echo " "
-echo " === Note, this test can fail for trivial ==="
-echo " === reasons on non-Linux systems. ==="
-echo " "
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test dev >${cwd}/tmp/original
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test dev >${cwd}/tmp/restored
-cd ${cwd}/tmp
-#
-# Use sed to cut out parts that *always* change
-#
-cat >sed.scr <<END_OF_DATA
-s%.*dev$%dev%
-s%.*[0-9][0-9]:[0-9][0-9]:[0-9][0-9] dev/ptmx%dev/ptmx%
-s%.*[0-9][0-9]:[0-9][0-9]:[0-9][0-9] dev/ttyp1%dev/ttyp1%
-s%.*[0-9][0-9]:[0-9][0-9]:[0-9][0-9] dev/null%dev/null%
-END_OF_DATA
-
-# strip file system change messages then sed and sort
-grep -v "Skip: File system change prohibited." original >1
-sed -f sed.scr 1 | sort >original
-#
-mv -f restored 1
-sed -f sed.scr 1 | sort >restored
-rm -f sed.scr
-#
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== !!!! dev-test-root failed !!!! ===== "
- echo " ===== !!!! dev-test-root failed !!!! ===== " >>test.out
- echo " "
-else
- echo " ===== dev-test-root OK ===== "
- echo " ===== dev-test-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-MUID=`/usr/bin/id -u`
-if [ $MUID != 0 ] ; then
- echo " "
- echo "You must be root to run this test."
- echo " ===== !!!! etc-test-root not run !!!! ===== "
- echo " ===== !!!! etc-test-root not run !!!! ===== " >>test.out
- echo " "
- exit 1
-fi
-echo " "
-echo " "
-echo " === Starting /etc save/restore test ==="
-echo " "
-echo " "
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "/etc" >/tmp/file-list
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File
-TestVolume001
-run job=NightlySave
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test etc >${cwd}/tmp/1
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test etc >${cwd}/tmp/2
-sort <${cwd}/tmp/1 >${cwd}/tmp/original
-sort <${cwd}/tmp/2 >${cwd}/tmp/restored
-rm -f ${cwd}/tmp/1 ${cwd}/tmp/2
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== !!!! etc-test-root failed !!!! ===== "
- echo " ===== !!!! etc-test-root failed !!!! ===== " >>test.out
- echo " "
-else
- echo " ===== etc-test-root OK ===== "
- echo " ===== etc-test-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape where we set the minimum and maximum block
-# sizes.
-#
-cwd=`pwd`
-scripts/copy-tape-confs
-scripts/cleanup-tape
-echo "${cwd}/build" >/tmp/file-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-echo "s%# Maximum Block Size% Maximum Block Size%" >${cwd}/tmp/2
-echo "s%# Minimum Block Size% Minimum Block Size%" >>${cwd}/tmp/2
-sed -f ${cwd}/tmp/2 ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo "!!!! sed problem in Fixed Block Size test !!!!!"
- echo " "
- exit 1
-fi
-rm -f ${cwd}/tmp/1 ${cwd}/tmp/2
-
-echo " "
-echo " "
-echo " === Starting Fixed Block Size test ==="
-echo " === Starting Fixed Block Size test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DDS-4
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! Fixed Block Size test Bacula source failed!!! !!!!! "
- echo " !!!!! Fixed Block Size test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== Fixed Block Size test Bacula source OK ===== "
- echo " ===== Fixed Block Size test OK ===== " >>test.out
-# scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run two jobs at the same time
-#
-cwd=`pwd`
-scripts/copy-tape-confs
-scripts/cleanup-tape
-
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting four-concurrent-jobs-tape ==="
-echo " === Starting four-concurrent-jobs-tape ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0
-run job=NightlySave level=Full Storage=DDS-4 yes
-run job=NightlySave level=Full Storage=DDS-4 yes
-run job=NightlySave level=Full Storage=DDS-4 yes
-run job=NightlySave level=Full Storage=DDS-4 yes
-@sleep 2
-status dir
-@sleep 5
-messages
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DDS-4
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! four-concurrent-jobs-tape Bacula source failed!!! !!!!! "
- echo " !!!!! four-concurrent-jobs-tape failed!!! !!!!! " >>test.out
- echo " "
- exit 1
-else
- echo " ===== four-concurrent-jobs-tape Bacula source OK ===== "
- echo " ===== four-concurrent-jobs-tape OK ===== " >>test.out
- scripts/cleanup
- exit 0
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run two jobs at the same time
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting four-concurrent-jobs-test ==="
-echo " === Starting four-concurrent-jobs-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File1
-TestVolume001
-label storage=File1
-TestVolume002
-update Volume=TestVolume001 MaxVolBytes=100000000
-@#50000000
-@#12
-run job=NightlySave level=Full Storage=File1
-yes
-reload
-run job=NightlySave level=Full Storage=File1
-yes
-reload
-run job=NightlySave level=Full Storage=File1
-yes
-reload
-run job=NightlySave level=Full Storage=File1
-yes
-reload
-reload
-reload
-reload
-@sleep 2
-status dir
-reload
-@sleep 5
-messages
-reload
-reload
-wait
-reload
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File1
-unmark *
-mark *
-done
-yes
-wait
-reload
-reload
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File1
-
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! four-concurrent-jobs-test Bacula source failed!!! !!!!! "
- echo " !!!!! four-concurrent-jobs-test failed!!! !!!!! " >>test.out
- echo " "
- exit 1
-else
- echo " ===== four-concurrent-jobs-test Bacula source OK ===== "
- echo " ===== four-concurrent-jobs-test OK ===== " >>test.out
- scripts/cleanup
- exit 0
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup four times, each with incremental then finally restore.
-# It should require at least 4 different bsrs.
-#
-cwd=`pwd`
-
-scripts/copy-tape-confs
-scripts/cleanup-tape
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting four-jobs-tape ==="
-echo " === Starting four-jobs-tape ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-estimate job=NightlySave listing
-estimate job=NightlySave listing
-estimate job=NightlySave listing
-messages
-@output tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0
-run job=NightlySave yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 1 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/dird/*.c ${cwd}/build/src/dird/*.o
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-
-#
-# run a second job
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run job=NightlySave level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 2 done"
-touch ${cwd}/build/src/dird/*.c
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#
-# run a third job
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run job=NightlySave level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 3 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#
-# run a fourth job
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run job=NightlySave level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 4 done"
-#
-# now do several restores to ensure we cleanup between jobs
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-@output tmp/log2.out
-@#
-@# now unmount the tape and start two restores
-@# at the same time
-@#
-unmount storage=DDS-4
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-restore where=${cwd}/tmp/bacula-restores select
-unmark *
-mark *
-done
-yes
-mount storage=DDS-4
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! four-jobs-tape Bacula source failed!!! !!!!! "
- echo " !!!!! four-jobs-tape failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== four-jobs-tape Bacula source OK ===== "
- echo " ===== four-jobs-tape OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup four times, each with incremental then finally restore.
-# It should require at least 4 different bsrs.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting four-jobs-test ==="
-echo " === Starting four-jobs-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-estimate job=CompressedTest listing
-estimate job=CompressedTest listing
-estimate job=CompressedTest listing
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=CompressedTest yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-echo "Backup 1 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/dird/*.c ${cwd}/build/src/dird/*.o
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-
-#
-# run a second job
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run job=CompressedTest
-yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-echo "Backup 2 done"
-touch ${cwd}/build/src/dird/*.c
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#
-# run a third job
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=CompressedTest yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-echo "Backup 3 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#
-# run a fourth job
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=CompressedTest yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-echo "Backup 4 done"
-#
-# now do several restores to ensure we cleanup between jobs
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-restore where=${cwd}/tmp/bacula-restores select all storage=File done
-yes
-wait
-restore where=${cwd}/tmp/bacula-restores select all storage=File done
-yes
-wait
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! four-jobs-test Bacula source failed!!! !!!!! "
- echo " !!!!! four-jobs-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== four-jobs-test Bacula source OK ===== "
- echo " ===== four-jobs-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do an Incremental and restore those two files.
-#
-# This script uses the autochanger and two tapes
-#
-cwd=`pwd`
-bin/bacula stop 2>&1 >/dev/null
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges 2>&1 >/dev/null
-cd ..
-
-scripts/copy-2tape-confs
-scripts/cleanup-2tape
-echo "${cwd}/tmp/build" >/tmp/file-list
-if test ! -d ${cwd}/tmp/build ; then
- mkdir ${cwd}/tmp/build
-fi
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-echo " "
-echo " "
-echo " === Starting incremental-2tape test ==="
-echo " === Starting incremental-2tape test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1
-label storage=DDS-4 volume=TestVolume002 slot=2
-run job=NightlySave yes
-wait
-messages
-quit
-END_OF_DATA
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-@# Force Incremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-run level=Incremental job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-diff -r tmp/build tmp/bacula-restores${cwd}/tmp/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! incremental-2tape test Bacula source failed!!! !!!!! "
- echo " !!!!! incremental-2tape test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== incremental-2tape test Bacula source OK ===== "
- echo " ===== incremental-2tape test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do an Incremental and restore those two files.
-#
-cwd=`pwd`
-
-scripts/copy-tape-confs
-scripts/cleanup-tape
-echo "${cwd}/tmp/build" >/tmp/file-list
-if test ! -d ${cwd}/tmp/build ; then
- mkdir ${cwd}/tmp/build
-fi
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-echo " "
-echo " "
-echo " === Starting incremental-tape test ==="
-echo " === Starting incremental-tape test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0
-run job=NightlySave yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run level=Incremental job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=DDS-4
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-diff -r tmp/build tmp/bacula-restores${cwd}/tmp/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! incremental-tape test Bacula source failed!!! !!!!! "
- echo " !!!!! incremental-tape test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== incremental-tape test Bacula source OK ===== "
- echo " ===== incremental-tape test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do an Incremental and restore those two files.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/tmp/build" >/tmp/file-list
-mkdir ${cwd}/tmp/build
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-echo " "
-echo " "
-echo " === Starting incremental-test ==="
-echo " === Starting incremental-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-label storage=File volume=TestVolume002
-run job=CompressedTest yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-#
-# Now create two new files to be restored later
-#
-sleep 1
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-cp -f ${cwd}/tmp/build/dird.c ${cwd}/tmp/build/ficheriro2.txt
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-@# Force Incremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-run level=Differential job=CompressedTest yes
-wait
-messages
-quit
-END_OF_DATA
-sleep 1
-touch ${cwd}/tmp/build/ficheriro1.txt
-touch ${cwd}/tmp/build/ficheriro2.txt
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run level=Incremental job=CompressedTest yes
-wait
-messages
-quit
-END_OF_DATA
-sleep 1
-cd ${cwd}/tmp/build
-cp -f ficheriro2.txt 1
-sed "s%a%b%g" 1 >ficheriro2.txt
-rm -f 1
-cd ${cwd}
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run level=Differential job=CompressedTest yes
-wait
-messages
-quit
-END_OF_DATA
-sleep 1
-touch ${cwd}/tmp/build/ficheriro1.txt
-touch ${cwd}/tmp/build/ficheriro2.txt
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run level=Incremental job=CompressedTest yes
-wait
-messages
-quit
-END_OF_DATA
-sleep 1
-touch ${cwd}/tmp/build/ficheriro1.txt
-touch ${cwd}/tmp/build/ficheriro2.txt
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run level=Incremental job=CompressedTest yes
-wait
-messages
-quit
-END_OF_DATA
-sleep 1
-touch ${cwd}/tmp/build/ficheriro1.txt
-touch ${cwd}/tmp/build/ficheriro2.txt
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run level=Incremental job=CompressedTest yes
-wait
-messages
-quit
-END_OF_DATA
-sleep 1
-touch ${cwd}/tmp/build/ficheriro1.txt
-touch ${cwd}/tmp/build/ficheriro2.txt
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run level=Incremental job=CompressedTest yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=File file=<${cwd}/tmp/restore-list
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-diff -r tmp/build tmp/bacula-restores${cwd}/tmp/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! incremental-test Bacula source failed!!! !!!!! "
- echo " !!!!! incremental-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== incremental-test Bacula source OK ===== "
- echo " ===== incremental-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the /lib directory
-# then restore it.
-#
-cwd=`pwd`
-bin/bacula stop 2>&1 >/dev/null
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges 2>&1 >/dev/null
-cd ..
-
-scripts/copy-tape-confs
-scripts/cleanup-tape
-echo "/lib" >/tmp/file-list
-echo " "
-echo " "
-echo " === Starting lib-tape-root test ==="
-echo " "
-echo " "
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 Volume=TestVolume001 slot=0
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/original
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/restored
-cd ${cwd}/tmp
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% original >1
-sort <1 >original
-#
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% restored >1
-sort <1 >restored
-rm -f 1
-#
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/nul
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== lib-tape-root failed!!! ===== "
- echo " ===== lib-tape-root failed!!! ===== " >>test.out
- echo " "
-else
- echo " ===== lib-tape-root OK ===== "
- echo " ===== lib-tape-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-MUID=`/usr/bin/id -u`
-if [ $MUID != 0 ] ; then
- echo " "
- echo "You must be root to run this test."
- echo " ===== !!!! lib-test-root not run !!!! ===== "
- echo " ===== !!!! lib-test-root not run !!!! ===== " >>test.out
- echo " "
- exit 1
-fi
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "/lib" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting /lib save/restore test ==="
-echo " "
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File
-TestVolume001
-run job=NightlySave
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-lib-test lib >${cwd}/tmp/original
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-lib-test lib >${cwd}/tmp/restored
-cd ${cwd}/tmp
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% original >1
-sort <1 >original
-#
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% restored >1
-sort <1 >restored
-rm -f 1
-#
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/nul
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== !!!! lib-test-root failed !!!! ===== "
- echo " ===== !!!! lib-test-root failed !!!! ===== " >>test.out
- echo " "
-else
- echo " ===== lib-test-root OK ===== "
- echo " ===== lib-test-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do a Decremental then a bunch of query commands
-# and finally restore the two files.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/tmp/build" >/tmp/file-list
-mkdir ${cwd}/tmp/build
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-echo " "
-echo " "
-echo " === Starting query-test ==="
-echo " === Starting query-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-label storage=File volume=TestVolume002
-run job=CompressedTest yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-@# Force decremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-run level=decremental job=CompressedTest yes
-wait
-messages
-@output
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run level=incremental job=CompressedTest yes
-wait
-messages
-@#
-@# Now do the queries
-@#
-query
-1
-query
-2
-ficheriro1.txt
-query
-3
-${cwd}/tmp/build/
-ficheriro1.txt
-Client1
-query
-7
-TestVolume001
-query
-8
-1
-query
-9
-Client1
-query
-10
-Default
-query
-11
-query
-12
-query
-13
-1
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=File file=<${cwd}/tmp/restore-list
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-diff -r tmp/build tmp/bacula-restores${cwd}/tmp/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! query-test Bacula source failed!!! !!!!! "
- echo " !!!!! query-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== query-test Bacula source OK ===== "
- echo " ===== query-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory but
-# create three volumes and do six backups causing the
-# volumes to be recycled, and cycling through the volumes
-# twice. Tests maxvoljobs and volretention.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting recycle-test ==="
-echo " === Starting recycle-test ===" >working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-label storage=File1 volume=TestVolume001
-label storage=File1 volume=TestVolume002
-label storage=File1 volume=TestVolume003
-update Volume=TestVolume001 volretention=10s
-update Volume=TestVolume001 maxvoljobs=1
-update Volume=TestVolume002 volretention=10s
-update Volume=TestVolume002 maxvoljobs=1
-update Volume=TestVolume003 volretention=10s
-update Volume=TestVolume003 maxvoljobs=1
-list volumes
-run job=NightlySave storage=File1 level=full yes
-wait
-messages
-list volumes
-run job=NightlySave storage=File1 level=full yes
-wait
-messages
-list volumes
-run job=NightlySave storage=File1 level=full yes
-wait
-messages
-list volumes
-@sleep 10
-run job=NightlySave storage=File1 level=full yes
-wait
-messages
-list volumes
-run job=NightlySave storage=File1 level=full yes
-wait
-messages
-@output tmp/log1.out
-list volumes
-run job=NightlySave storage=File1 level=full yes
-wait
-messages
-list volumes
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File1
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File1
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! recycle-test Bacula source failed!!! !!!!! "
- echo " !!!!! recycle-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== recycle-test Bacula source OK ===== "
- echo " ===== recycle-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape where the maximum tape file size is set to 1M
-# then restore a few files from it. Note, by setting the maximum
-# file size to 1M, it runs very slow. There are about 64 files that
-# are created during each of the two backups.
-#
-cwd=`pwd`
-scripts/copy-tape-confs
-scripts/cleanup-tape
-echo "${cwd}/build" >/tmp/file-list
-sed s%\^%${cwd}% ${cwd}/scripts/flist >${cwd}/tmp/restore2-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-echo " "
-echo " "
-echo " === Starting restore-by-file-tape test ==="
-echo " === Starting restore-by-file-tape test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0
-run job=NightlySave level=Full yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=DDS-4 file=<${cwd}/tmp/restore2-list
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-dstat=0
-scripts/check_for_zombie_jobs storage=DDS-4
-#
-# We need to stop and start Bacula to
-# test appending to a previously written tape
-#
-bin/bacula stop 2>&1 >/dev/null
-bin/bacula start 2>&1 >/dev/null
-for i in `cat ${cwd}/tmp/restore2-list`; do
- diff $i ${cwd}/tmp/bacula-restores$i
- if [ $? != 0 ] ; then
- dstat=1
- fi
-done
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-if [ $dstat != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! restore-by-file-tape test Bacula source failed!!! !!!!! "
- echo " !!!!! restore-by-file-tape test failed!!! !!!!! " >>test.out
- echo " "
- bin/bacula stop 2>&1 >/dev/null
- exit 1
-else
- echo " First of two restores OK "
-fi
-rm -rf ${cwd}/tmp/bacula-restores
-#
-# Now do a second backup and restore
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run job=NightlySave level=Full yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores
-7
-<${cwd}/tmp/restore2-list
-
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-bin/bacula stop 2>&1 >/dev/null
-for i in `cat ${cwd}/tmp/restore2-list`; do
- diff $i ${cwd}/tmp/bacula-restores$i
- if [ $? != 0 ] ; then
- dstat=1
- fi
-done
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-if [ $dstat != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! restore-by-file-tape test Bacula source failed!!! !!!!! "
- echo " !!!!! restore-by-file-tape test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== restore-by-file-tape test Bacula source OK ===== "
- echo " ===== restore-by-file-tape test OK ===== " >>test.out
-# scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then restore it.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/tmp/build" >/tmp/file-list
-mkdir ${cwd}/tmp/build
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp/build
-ls >../1
-cd ..
-sed s%\^%${cwd}/tmp/build/% 1 >restore-list
-rm -f 1
-cd ${cwd}
-
-echo " "
-echo " "
-echo " === Starting restore-by-file-test ==="
-echo " === Starting restore-by-file-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=CompressedTest yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=File
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r tmp/build tmp/bacula-restores${cwd}/tmp/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! restore-by-file-test Bacula source failed!!! !!!!! "
- echo " !!!!! restore-by-file-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== restore-by-file-test Bacula source OK ===== "
- echo " ===== restore-by-file-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a backup of the full bacula build directory, but with the
-# Maximum File Size set. Then do a restore of a few files to kick in
-# disk seeking (not yet enabled), and ensure that the restored files
-# match. Even though disk seeking is not yet enabled, this is a good test,
-# and once it is enabled, this will test it.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/tmp/build" >/tmp/file-list
-rm -rf ${cwd}/tmp/build
-mkdir ${cwd}/tmp/build
-# Copy only the .c files (to be restored)
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp/build
-ls >../1
-cd ..
-sed s%\^%${cwd}/tmp/build/% 1 >restore-list
-# At this point restore-list contains the list
-# of files we will restore
-rm -f 1
-cd ${cwd}
-# Now backup *everything*
-rm -rf ${cwd}/tmp/build
-mkdir ${cwd}/tmp/build
-cp -fp ${cwd}/build/src/dird/* ${cwd}/tmp/build
-# Enable MaximumFileSize
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-echo " "
-echo " "
-echo " === Starting restore-disk-seek-test ==="
-echo " === Starting restore-disk-seek-test ===" >>working/log
-echo " "
-
-bin/bacula start -v -v 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=CompressedTest yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-sql
-select * from JobMedia;
-
-restore where=${cwd}/tmp/bacula-restores storage=File
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-# Now setup a control directory of only what we *should* restore
-rm -rf ${cwd}/tmp/build
-mkdir ${cwd}/tmp/build
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r tmp/build tmp/bacula-restores${cwd}/tmp/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! restore-disk-seek-test Bacula source failed!!! !!!!! "
- echo " !!!!! restore-disk-seek-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== restore-disk-seek-test Bacula source OK ===== "
- echo " ===== restore-disk-seek-test OK ===== " >>test.out
-# scripts/cleanup
-# rm -rf ${cwd}/tmp/build
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then restore a few selected files.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-sed s%\^%${cwd}% ${cwd}/scripts/flist >${cwd}/tmp/restore2-list
-
-echo " "
-echo " "
-echo " === Starting restore2-by-file-test ==="
-echo " === Starting restore2-by-file-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=CompressedTest yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=File file=<${cwd}/tmp/restore2-list
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-dstat=0
-for i in `cat ${cwd}/tmp/restore2-list`; do
- diff $i ${cwd}/tmp/bacula-restores$i
- if [ $? != 0 ] ; then
- dstat=1
- fi
-done
-if [ $dstat != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! restore2-by-file-test Bacula source failed!!! !!!!! "
- echo " !!!!! restore2-by-file-test failed!!! !!!!! " >>test.out
- echo " "
- echo "Backup term status = $bstat"
- echo "Restore term status = $rstat"
- echo "Diff status = $dstat"
- echo " "
-else
- echo " ===== restore2-by-file-test Bacula source OK ===== "
- echo " ===== restore2-by-file-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Create a 60MB file with random bytes. Back it up to 6 Volumes
-# each constrained to 10MB using the automatic labeling feature.
-#
-
-if test ! -c /dev/urandom ; then
- echo "No random device. Test skipped.\n"
- exit 0
-fi
-cwd=`pwd`
-scripts/copy-testa-confs
-scripts/cleanup
-echo "${cwd}/tmp/largefile" >/tmp/file-list
-# Create 56MB file with random data
-echo "Creating a 56MB file with random data ..."
-dd if=/dev/urandom of=${cwd}/tmp/largefile bs=1024 count=55000
-echo "largefile created"
-
-echo " "
-echo " "
-echo " === Starting six-vol-test ==="
-echo " === Starting six-vol-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run job=MultiVol storage=File yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff tmp/largefile tmp/bacula-restores${cwd}/tmp/largefile 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! six-vol-test Bacula source failed!!! !!!!! "
- echo " !!!!! six-vol-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== six-vol-test Bacula source OK ===== "
- echo " ===== six-vol-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape where the maximum tape file size is set to 1M
-#
-cwd=`pwd`
-scripts/copy-tape-confs
-scripts/cleanup-tape
-
-echo "${cwd}/build" >/tmp/file-list
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-echo " "
-echo " "
-echo " === Starting Small File Size test ==="
-echo " === Starting Small File Size test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DDS-4
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! Small File Size test Bacula source failed!!! !!!!! "
- echo " !!!!! Small File Size test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== Small File Size test Bacula source OK ===== "
- echo " ===== Small File Size test OK ===== " >>test.out
-# scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory but
-# split the archive into four volumes, two of which are
-# totally full. I.e. make sure that bsr selects all tapes
-# including those fully spanned.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting span-vol-test ==="
-echo " === Starting span-vol-test ===" >working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File1 volume=TestVolume001
-label storage=File1 volume=TestVolume002
-label storage=File1 volume=TestVolume003
-label storage=File1 volume=TestVolume004
-update Volume=TestVolume001 MaxVolBytes=3000000
-update Volume=TestVolume002 MaxVolBytes=3000000
-update Volume=TestVolume003 MaxVolBytes=3000000
-run job=NightlySave storage=File1 yes
-wait
-list volumes
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File1
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File1
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! span-vol-test Bacula source failed!!! !!!!! "
- echo " !!!!! span-vol-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== span-vol-test Bacula source OK ===== "
- echo " ===== span-vol-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the Sparse option
-# then restore it.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-bin/bacula stop 2>&1 >/dev/null
-
-echo " "
-echo " "
-echo " === Starting sparse-compressed-test ==="
-echo " === Starting sparse-compressed-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=SparseCompressedTest yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=File done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! sparse-compressed-test Bacula source failed!!! !!!!! "
- echo " !!!!! sparse-compressed-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== sparse-compressed-test Bacula source OK ===== "
- echo " ===== sparse-compressed-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the Sparse option
-# then restore it.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting sparse-test ==="
-echo " === Starting sparse-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=SparseTest yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! sparse-test Bacula source failed!!! !!!!! "
- echo " !!!!! sparse-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== sparse-test Bacula source OK ===== "
- echo " ===== sparse-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-echo " " >test.out
-rm -f bin/working/*
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup a second time and finally restore it
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting two-jobs-test ==="
-echo " === Starting two-jobs-test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-setdebug level=15 storage=File
-@output /dev/null
-messages
-@output /dev/null
-estimate job=CompressedTest listing
-estimate job=CompressedTest listing
-estimate job=CompressedTest listing
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=CompressedTest yes
-wait
-messages
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-echo "Backup 1 done"
-touch ${cwd}/build/src/dird/*.c
-#
-# run a second job
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-run job=CompressedTest
-yes
-wait
-messages
-@#
-@# now do several restores to ensure we cleanup between jobs
-@#
-@output /dev/null
-restore where=${cwd}/tmp/bacula-restores select all storage=File done
-yes
-wait
-restore where=${cwd}/tmp/bacula-restores select all storage=File done
-yes
-wait
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! two-jobs-test Bacula source failed!!! !!!!! "
- echo " !!!!! two-jobs-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== two-jobs-test Bacula source OK ===== "
- echo " ===== two-jobs-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory but
-# split the archive into two volumes
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting two-vol-test ==="
-echo " === Starting two-vol-test ===" >working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File1 volume=TestVolume001
-label storage=File1 volume=TestVolume002
-update Volume=TestVolume001 MaxVolBytes=3000000
-run job=NightlySave storage=File1 yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=File1 done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File1
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! two-vol-test Bacula source failed!!! !!!!! "
- echo " !!!!! two-vol-test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== two-vol-test Bacula source OK ===== "
- echo " ===== two-vol-test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to two tapes where the maximum tape file size is set to 1M
-#
-cwd=`pwd`
-bin/bacula stop 2>&1 >/dev/null
-scripts/copy-2tape-confs
-scripts/prepare-two-tapes
-echo "${cwd}/build" >/tmp/file-list
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges 2>&1 >/dev/null
-cd ..
-out="tmp/sed_tmp"
-echo "s%# Maximum File Size% Maximum File Size%g" >${out}
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed -f ${out} ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-echo " "
-echo " "
-echo " === Starting Two Volume Tape test ==="
-echo " === Starting Two Volume Tape test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1
-label storage=DDS-4 volume=TestVolume002 slot=2
-update Volume=TestVolume001 MaxVolBytes=3000000
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=DDS-4
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! Two Volume Tape test Bacula source failed!!! !!!!! "
- echo " !!!!! Two Volume Tape test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== Two Volume Tape test Bacula source OK ===== "
- echo " ===== Two Volume Tape test OK ===== " >>test.out
-# scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the /usr directory
-# then restore it.
-#
-cwd=`pwd`
-scripts/copy-tape-confs
-scripts/cleanup-tape
-echo "/usr" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting usr-tape-root test ==="
-echo " "
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 Volume=TestVolume001 slot=0
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/original
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/restored
-cd ${cwd}/tmp
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% original >1
-sort <1 >original
-#
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% restored >1
-sort <1 >restored
-rm -f 1
-#
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/nul
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== !!!! usr-tape-root failed !!!! ===== "
- echo " ===== !!!! usr-tape-root failed !!!! ===== " >>test.out
- echo " "
-else
- echo " ===== usr-tape-root OK ===== "
- echo " ===== usr-tape-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then verify the catalog.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-echo "${cwd}/build" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting verify Volume Test ==="
-echo " === Starting verify Volume Test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a verify volume
-@#
-@output ${cwd}/tmp/original
-run job=VerifyVolume
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-sleep 2
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Verify OK" ${cwd}/tmp/original 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! Verify Volume failed!!! !!!!! "
- echo " !!!!! Verify Volume failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== Verify Volume Test OK ===== "
- echo " ===== Verify Volume Test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-if test ! -d weird-files ; then
- echo " "
- echo "Weird files not configured. Test not run."
- exit 0
-fi
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-#
-# Note, we save the weird-files directory twice on purpose
-# because this causes problems with hard linked files
-# that are only saved once. In 1.33, Bacula now deals
-# with this situation.
-#
-echo "${cwd}/weird-files" >/tmp/file-list
-echo "${cwd}/weird-files" >>/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting weird filenames test ==="
-echo " === Starting weird filenames test ===" >>working/log
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File
-TestVolume001
-run job=NightlySave
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-${cwd}/bin/testls weird-files | sort >${cwd}/tmp/original
-cd tmp/bacula-restores${cwd}
-${cwd}/bin/testls weird-files | sort >${cwd}/tmp/restored
-cd ${cwd}
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff ${cwd}/tmp/original ${cwd}/tmp/restored 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! Weird files test failed!!! !!!!! "
- echo " !!!!! Weird files test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== Weird files test OK ===== "
- echo " ===== Weird files test OK ===== " >>test.out
- cd ${cwd}
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-if test ! -d weird-files ; then
- echo " "
- echo "weird files not configured. Test not run."
- exit 0
-fi
-cwd=`pwd`
-scripts/copy-test-confs
-scripts/cleanup
-rm -rf weird-files2
-cp -Rp weird-files weird-files2
-echo "${cwd}/weird-files2" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting weird filenames2 test ==="
-echo " === Starting weird filenames2 test ===" >>working/log
-echo " "
-
-bin/testls weird-files2 >${cwd}/tmp/original
-bin/bacula start
-# bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=NightlySave yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-#
-# Now mess up the a hard link, and a soft link
-#
-cd weird-files2
-rm -f hard-file2
-ln hard-file3 hard-file2
-rm -f soft-file2
-ln -s soft-file3 soft-file2
-cd ${cwd}
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where= storage=File
-5
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-scripts/check_for_zombie_jobs storage=File
-bin/bacula stop 2>&1 >/dev/null
-bin/testls weird-files2 >${cwd}/tmp/restored
-grep "^Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-diff ${cwd}/tmp/original ${cwd}/tmp/restored 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! Weird files2 test failed!!! !!!!! "
- echo " !!!!! Weird files2 test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== Weird files2 test OK ===== "
- echo " ===== Weird files2 test OK ===== " >>test.out
- cd ${cwd}
- scripts/cleanup
- rm -rf weird-files2
-fi
projects / bacula / bacula / commitdiff