=head1 LICENSE
Bweb - A Bacula web interface
- Bacula® - The Network Backup Solution
+ Bacula® - The Network Backup Solution
Copyright (C) 2000-2006 Free Software Foundation Europe e.V.
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
- Bacula® is a registered trademark of John Walker.
+ Bacula® is a registered trademark of John Walker.
The licensor of Bacula is the Free Software Foundation Europe
(FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zurich,
Switzerland, email:ftf@fsfeurope.org.
use CGI;
use POSIX qw/strftime/;
-use File::Basename qw/basename dirname/;
my $conf = new Bweb::Config(config_file => $Bweb::config_file);
$conf->load();
my $legend = CGI::param('legend') || 'on' ;
$legend = ($legend eq 'on')?1:0;
-my $arg = $bweb->get_form(qw/width height limit offset age where jobid
+my $arg = $bweb->get_form(qw/width height limit offset age
jfilesets level status jjobnames jclients/);
my ($limitq, $label) = $bweb->get_limit(age => $arg->{age},
print $obj->plot([$d, values %$ret])->png;
}
-# it works only with postgresql at this time
-elsif ($graph eq 'file_histo' and $arg->{where}) {
-
- my $dir = $dbh->quote(dirname($arg->{where}) . '/');
- my $file = $dbh->quote(basename($arg->{where}));
-
- my $query = "
-SELECT UNIX_TIMESTAMP(Job.StartTime) AS starttime,
- Client.Name AS client,
- Job.Name AS jobname,
- base64_decode_lstat(8,LStat) AS lstat
-
-FROM Job, Client, FileSet, Filename, Path, File
-WHERE Job.ClientId = Client.ClientId
- AND Job.FileSetId = FileSet.FileSetId
- AND Job.Type = 'B'
- AND File.JobId = Job.JobId
- AND File.FilenameId = Filename.FilenameId
- AND File.PathId = Path.PathId
- AND Path.Path = $dir
- AND Filename.Name = $file
- $clientq
- $statusq
- $filesetq
- $levelq
- $jobnameq
-$limitq
-";
-
- print STDERR $query if ($debug);
-
- my $all = $dbh->selectall_arrayref($query) ;
-
- my $obj = get_graph('title' => "File size : $arg->{where}",
- 'y_label' => 'File size',
- 'y_min_value' => 0,
- 'y_min_value' => 0,
- 'y_number_format' => \&Bweb::human_size,
- );
-
-
- my ($d, $ret) = make_tab($all);
- if ($legend) {
- $obj->set_legend(keys %$ret);
- }
- print $obj->plot([$d, values %$ret])->png;
-}
-
-# it works only with postgresql at this time
-# TODO: use brestore_missing_path
-elsif ($graph eq 'rep_histo' and $arg->{where}) {
-
- my $dir = $arg->{where};
- $dir .= '/' if ($dir !~ m!/$!);
- $dir = $dbh->quote($dir);
-
- my $query = "
-SELECT UNIX_TIMESTAMP(Job.StartTime) AS starttime,
- Client.Name AS client,
- Job.Name AS jobname,
- brestore_pathvisibility.size AS size
-
-FROM Job, Client, FileSet, Path, brestore_pathvisibility
-WHERE Job.ClientId = Client.ClientId
- AND Job.FileSetId = FileSet.FileSetId
- AND Job.Type = 'B'
- AND Job.JobId = brestore_pathvisibility.JobId
- AND Path.PathId = brestore_pathvisibility.PathId
- AND Path.Path = $dir
- $clientq
- $statusq
- $filesetq
- $levelq
- $jobnameq
-$limitq
-";
-
- print STDERR $query if ($debug);
-
- my $all = $dbh->selectall_arrayref($query) ;
-
- my $obj = get_graph('title' => "Directory size : $arg->{where}",
- 'y_label' => 'Directory size',
- 'y_min_value' => 0,
- 'y_min_value' => 0,
- 'y_number_format' => \&Bweb::human_size,
- );
-
-
- my ($d, $ret) = make_tab($all);
- if ($legend) {
- $obj->set_legend(keys %$ret);
- }
- print $obj->plot([$d, values %$ret])->png;
-}
-
elsif ($graph eq 'job_rate') {
my $query = "
+++ /dev/null
-config.out
-build
-bin
-test.out
-weird-files
-weird-files2
-diff
-tmp
-working
-Makefile
-test1.out
-time.out
+++ /dev/null
-#
-# Makefile for Bacula regression testing
-#
-# Note, Makefile is built from Makefile.in, which you should not really
-# need to change, by envoking:
-#
-# ./config <user's configuration>
-# e.g.
-#
-# ./config kern.conf
-#
-#
-
-# suck in user's configuration
-@CONFIG@
-
-first_rule: all
-
-all:
-
-setup: bacula sed
-
-#
-# Some machines cannot handle the sticky bit and other garbage that
-# is in weird-files, so we load and run it only on Linux machines.
-#
-bacula: all
- @rm -rf bin build weird-files tmp
- (if test x`uname` = xLinux -o x`uname` = xFreeBSD ; then \
- tar xfz weird-files.tar.gz ;\
- fi)
- rm -rf tmp working
- mkdir tmp working
- echo "Doing: scripts/setup ${BACULA_SOURCE} ${EMAIL} ${WHICHDB} ${TCPWRAPPERS} ${OPENSSL}"
- scripts/setup ${BACULA_SOURCE} ${EMAIL} ${WHICHDB} ${TCPWRAPPERS} ${SMTP_HOST} ${OPENSSL}
-
-sed:
- echo "Doing: scripts/do_sed ${EMAIL} ${TAPE_DRIVE} ${AUTOCHANGER} ${AUTOCHANGER_PATH} ${TAPE_DRIVE1} ${SMTP_HOST}"
- scripts/do_sed ${EMAIL} ${TAPE_DRIVE} ${AUTOCHANGER} ${AUTOCHANGER_PATH} ${TAPE_DRIVE1} ${SMTP_HOST}
-
-# Run all non-root userid tests
-test:
- ./all-non-root-tests
-
-# run all file and tape tests
-full_test:
- ./all-tape-and-file-tests
-
-# These tests require you to run as root
-root_test:
- ./all-root-tests
-
-clean:
- scripts/cleanup
- rm -f /tmp/file-list
- rm -fr tmp/* working/*
- rm -f test.out
- rm -f diff
- rm -f 1 2 3 scripts/1 scripts/2 scripts/3 tests/1 tests/2 tests/3
- find . -name .#* -exec rm -rf {} \;
-
-# Reset our userid after running as root
-reset:
- chown -R ${USER}:${USER} . tmp working
- scripts/cleanup
- rm -f /tmp/file-list tmp/file-list
- rm -f tmp/* working/*
-
-distclean: clean
- rm -rf bin build weird-files weird-files weird-files2 tmp working
- rm -f scripts/*.conf
-
+++ /dev/null
- Bacula Regression
- Kern Sibbald
-
-This is Bacula's regression script directory.
-
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-Warning!!!! Make sure not to run it on the same system
-with your production Catalog because the tables will all
-be cleared. You can run it on the your production system
-if you use a different database. E.g. if your production
-system uses MySQL, you can use SQLite here.
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
-
-To set it up, create your personal configuration file, by
-copying prototype.conf to xxx.conf or simply editing prototype.conf
-directly.
-
-Then edit your conf file and define appropriate values
-for the variables that are in that file. If you want to see
-a real example, look at kern.conf, but please don't use my
-email address!
-
-If you are using SQLite, make sure that depkgs is pre-built if it
-isn't already: (cd your-depkgs; make sqlite).
-
-Note, if you use any database other than SQLite, be sure it is not
-your production database because Bacula will delete all the tables
-and recreate them. With SQLite, a new different database is created,
-so it will not affect your production system.
-
-Using the .conf file, you can now select between any Catalog type:
-SQLite, SQLite3, MySQL, or PostgreSQL. Be aware, however, if you
-use an installed database on a production server, running these
-tests will delete all the tables !!!!!!!!!!!!!!!!!! I run my
-tests on a non-production machine, and in addition, I normally use
-SQLite as the database, while my production uses MySQL.
-
-Then do:
-
- ./config xxx.conf
- make setup
-
-You run the above one time. This will build a Makefile from
-Makefile.in and your xxx.conf file, copy the Bacula source,
-configure, build it, and configure all the Bacula scripts
-and conf files. If you change your source, you will need to
-redo this command.
-
-Then you can run any of the tests in the tests subdirectory.
-Each test whose name ends in -root requires you to be root for
-a resonable run. Each test is totally independent of any other
-test. Aside from the required "make setup", each test is totally
-self-initalizing and should clean up after itself.
-
-All the tests expect you to execute them from the main regress
-directory!
-
-You can run all the disk based tests by doing:
-
- ./do_file
-
-The disk based tests are totally separate from any production
-system, provided you have configured the database appropriately
-as noted above.
-
-You can run all the disk and most of the tape tests by doing:
-
- ./do_all
-
-======== Important !!! ============
-When running the tape tests, Bacula will write on any tape that
-is in the tape drive that you have configured. If it is a production
-Bacula tape, it will be destroyed. If you have configured an Autochanger,
-Bacula will write on the tapes in slots 1 and 2 thus destroying any
-information on those tapes, even if they are Bacula production tapes.
-===================================
-
-Each of the above calls one or more scripts. By looking at the
-scripts available in this directory, you can see that there are a number
-of options for running tests.
-
-You can run them individually as:
-
- tests/two-jobs-test
-
-or all non-root tests (my normal testing under my account)
-
- ./all-non-root-tests
-
-or all tests (I only run these before a production release):
-
- su
- ./all-tests
-
-
-after running the root tests, while still root, it is a good idea
-to do:
-
- make reset
-
-this cleans up any files that may be created with root permissions.
-
-If you want to add more tests, do so by putting the shell script
-in the tests subdirectory. Be careful when adding (or better not)
-new clients, pools, and such to the test-bacula-dir.conf.in file
-as it may invalidate a good number of tests, which respond to
-questions by answering with a number (i.e. the order of the selection
-list is known). It might be better to add your own testb-bacula...
-configuration file.
-
-To avoid re-doing a make setup if you have made a change to the
-conf files, and you do not need a new copy of the source, you can simply do:
-
- make sed
-
-Debugging failed tests:
-The simplest thing to do is to edit tests/xxxx where xxxx is the name of
-the test, and change the line "set_debug 0" to "set_debug 1". If the test has
-not been updated to have the debug variable, please notify Kern, and I
-will be happy to fix it -- I am upgrading them one at a time.
-
-Also, if you run from time to time on a computer that is not connected
-to the network, please be sure that "hostname" is set to "localhost",
-otherwise, your tests may fail because the hostname used by Bacula's
-./configure cannot be properly resolved.
+++ /dev/null
-#!/bin/sh
-#
-# Run all tape tests
-#
-tests/test0
-tests/two-volume-tape
-tests/incremental-2tape
-echo " "
-echo " "
-echo "2 Tape Test results"
-cat test.out
-scripts/cleanup
+++ /dev/null
-#!/bin/sh
-#
-# Run all tape tests
-#
-. ./config.out
-if test ! x$AUTOCHANGER = x/dev/null ; then
- mtx -f $AUTOCHANGER load 1 >/dev/null &2>/dev/null
-fi
-cp test.out test1.out
-tests/test0
-tests/backup-bacula-tape
-tests/btape-fill-tape
-tests/fixed-block-size-tape
-tests/four-concurrent-jobs-tape
-tests/four-jobs-tape
-tests/incremental-tape
-tests/relabel-tape
-tests/restore-by-file-tape
-tests/small-file-size-tape
-tests/truncate-bug-tape
-tests/two-pool-tape
-tests/2drive-incremental-2tape
-tests/bscan-tape
-tests/verify-vol-tape
-echo " "
-echo " "
-echo "Test results"
-cat test.out
-scripts/cleanup
+++ /dev/null
-#!/bin/sh
-#
-# Run all tests
-#
-rm -f test1.out
-tests/test0
-echo " "
-tests/auto-label-test
-tests/backup-bacula-test
-tests/bextract-test
-tests/bscan-test
-tests/bsr-opt-test
-tests/compressed-test
-tests/compressed-encrypt-test
-tests/concurrent-jobs-test
-tests/data-encrypt-test
-#tests/sparse-encrypt-test
-#tests/gigaslam-sparse-test
-tests/differential-test
-tests/four-concurrent-jobs-test
-tests/four-jobs-test
-tests/incremental-test
-tests/query-test
-tests/recycle-test
-tests/restore2-by-file-test
-tests/restore-by-file-test
-tests/restore-disk-seek-test
-tests/six-vol-test
-tests/span-vol-test
-tests/sparse-compressed-test
-tests/sparse-test
-tests/two-jobs-test
-tests/two-vol-test
-tests/verify-vol-test
-tests/weird-files2-test
-tests/weird-files-test
-tests/migration-job-test
-tests/migration-jobspan-test
-tests/migration-volume-test
-tests/migration-time-test
-tests/hardlink-test
-#
-# The following are Virtual Disk Autochanger tests
-tests/two-pool-test
-tests/two-volume-test
-tests/incremental-2disk
-tests/2drive-incremental-2disk
-tests/scratch-pool-test
-echo " "
-echo "Test results"
-cat test.out
-scripts/cleanup
+++ /dev/null
-#!/bin/sh
-#
-# Run all root tests
-#
-rm -f test.out
-tests/dev-test-root
-tests/etc-test-root
-tests/lib-test-root
-tests/usr-tape-root
-cat test.out
-scripts/cleanup
+++ /dev/null
-#!/bin/sh
-#
-# Run all tests
-#
-./all-non-root-tests
-./endtime
-./all-non-root-tape-tests
+++ /dev/null
-#!/bin/sh
-#
-# Run all tests
-#
-./all-non-root-tests
-./all-root-tests
-cat test.out
-scripts/cleanup
+++ /dev/null
-#/bin/sh
-#
-# First argument is expected to be a user's configuration file
-#
-if ! test -e $1 ; then
- echo "Arg1 must specify a config file (e.g. prototype.conf)"
- exit 1
-fi
-sed -e "/@CONFIG@/r $1" -e "s/@CONFIG@//" Makefile.in >Makefile
+++ /dev/null
-#!/bin/sh
-/home/kern/bacula/bin/startmysql
-make setup
-./starttime
-if [ ! -e bin/tape_options ] ; then
- touch bin/tape_options
-fi
-./all-tape-and-file-tests
-./endtime
-./all-non-root-2tape-tests
-./endtime
+++ /dev/null
-#!/bin/sh
-make setup
-./all-non-root-tape-tests
+++ /dev/null
-#!/bin/sh
-# /home/kern/bacula/bin/startmysql
-make setup
-./starttime
-./all-non-root-tests
-./endtime
+++ /dev/null
-#!/usr/bin/python
-from time import time as now
-
-t = now()
-fn = open('time.out', 'r')
-s = fn.readline()
-fn.close()
-diff = t - float(s)
-h = int(diff / 3600)
-m = int((diff - h * 3600) / 60)
-sec = diff - h * 3600 - m * 60
-print 'Total time = %d:%02d:%02d or %d secs' % (h, m, sec, t - float(s))
+++ /dev/null
-#!/bin/sh
-./all-non-root-tests
+++ /dev/null
-# Where to get the source to be tested
-# BACULA_SOURCE="${HOME}/bacula/branch-1.36.2"
-BACULA_SOURCE="${HOME}/bacula/k"
-
-# Where to send email !!!!! Change me !!!!!!!
-EMAIL=kern@sibbald.com
-SMTP_HOST="matou.sibbald.com"
-
-# Full "default" path where to find sqlite (no quotes!)
-SQLITE_DIR=${HOME}/bacula/depkgs/sqlite
-
-TAPE_DRIVE="/dev/nsa0"
-# if you don't have an autochanger set AUTOCHANGER to /dev/null
-AUTOCHANGER="/dev/sg0"
-# For two drive tests -- set to /dev/null if you do not have it
-TAPE_DRIVE1="/dev/null"
-
-# This must be the path to the autochanger including its name
-AUTOCHANGER_PATH="/usr/local/sbin/mtx"
-
-# Set your database here
-WHICHDB?="--with-sqlite=${SQLITE_DIR}"
-#WHICHDB="--with-mysql=${HOME}/mysql"
-
-# Set this to "--with-tcp-wrappers" or "--without-tcp-wrappers"
-TCPWRAPPERS="--with-tcp-wrappers"
-
-# Set this to "" to disable OpenSSL support, "--with-openssl=yes"
-# to enable it, or provide the path to the OpenSSL installation,
-# eg "--with-openssl=/usr/local"
-OPENSSL=""
+++ /dev/null
-# Where to get the source to be tested
-# BACULA_SOURCE="${HOME}/bacula/branch-1.38"
-#BACULA_SOURCE="${HOME}/bacula/bacula-1.39.22-20060908"
-BACULA_SOURCE="${HOME}/bacula/k"
-
-# Where to send email !!!!! Change me !!!!!!!
-EMAIL=kern@sibbald.com
-SMTP_HOST="localhost"
-
-# Full "default" path where to find sqlite (no quotes!)
-#SQLITE_DIR=${HOME}/bacula/depkgs/sqlite3
-SQLITE_DIR=${HOME}/bacula/depkgs/sqlite
-
-TAPE_DRIVE="/dev/nst0"
-# if you don't have an autochanger set AUTOCHANGER to /dev/null
-AUTOCHANGER="/dev/sg0"
-# For two drive tests -- set to /dev/null if you do not have it
-TAPE_DRIVE1="/dev/null"
-
-# This must be the path to the autochanger including its name
-AUTOCHANGER_PATH="/usr/sbin/mtx"
-
-# Set your database here
-#WHICHDB="--with-sqlite=${SQLITE_DIR}"
-WHICHDB="--with-mysql"
-#WHICHDB="--with-postgresql"
-#WHICHDB="--with-sqlite3=${SQLITE_DIR}"
-
-# Set this to "--with-tcp-wrappers" or "--without-tcp-wrappers"
-TCPWRAPPERS="--with-tcp-wrappers"
-
-# Set this to "" to disable OpenSSL support, "--with-openssl=yes"
-# to enable it, or provide the path to the OpenSSL installation,
-# eg "--with-openssl=/usr/local"
-OPENSSL="--with-openssl"
+++ /dev/null
-tests/btape-fill-full-tape
-tests/eot-fail-tape
+++ /dev/null
-#
-# Prototype personal configuration file for the regression
-# scripts. Either edit this file directly, or better copy
-# it elsewhere so it won't get overwritten.
-#
-
-#
-# Put the full path to the Bacula source code to be tested
-#
-BACULA_SOURCE=
-
-# Where to send email messages
-#
-EMAIL=
-SMTP_HOST=localhost
-
-# Full "default" path where to find sqlite.
-# This is only used if you do not specify a database override on the
-# make command.
-#
-# N.B. DON'T PUT QOUTES AROUND THE PATH.
-#
-SQLITE_DIR=${HOME}/bacula/depkgs/sqlite
-
-#
-# The device name of your tape drive if you have one
-#
-TAPE_DRIVE=/dev/nst0
-TAPE_DRIVE1=/dev/null
-
-#
-# if you don't have an autochanger set AUTOCHANGER to /dev/null
-#
-AUTOCHANGER=/dev/sg0
-
-#
-# This must be the path to the autochanger including its name
-#
-AUTOCHANGER_PATH=/bin/mtx
-
-# Set your database here
-WHICHDB="--with-sqlite=${SQLITE_DIR}"
-#WHICHDB="--with-mysql"
-#WHICHDB="--with-postgresql"
-
-# Set this to "--with-tcp-wrappers" or "--without-tcp-wrappers"
-TCPWRAPPERS="--with-tcp-wrappers"
-
-# Set this to "" to disable OpenSSL support, "--with-openssl=yes"
-# to enable it, or provide the path to the OpenSSL installation,
-# eg "--with-openssl=/usr/local"
-OPENSSL=""
+++ /dev/null
-#!/bin/sh
-bin/bacula start
-bin/bconsole -c bin/bconsole.conf
+++ /dev/null
-bacula-dir-migration.conf
-bacula-sd-migration.conf
-crypto-bacula-fd.conf
-new-test-bacula-dir.conf
-bacula-dir.conf
-bacula-fd.conf
-bacula-sd.conf
-console.conf
-bconsole.conf
-test-bacula-dir.conf
-test-bacula-fd.conf
-test-bacula-sd.conf
-test-console.conf
-testa-bacula-dir.conf
-bacula-dir-tape.conf
-bacula-sd-tape.conf
-bacula-sd-2tape.conf
-cleanup-tape
-cleanup-2tape
-prepare-two-tapes
-cleanup-2drive
-bacula-sd-2drive.conf
-bacula-sd-win32-tape.conf
-bacula-sd-2drive.conf
-bacula-dir-win32-tape.conf
-win32-bacula-dir-tape.conf
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.39
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
- Messages = Daemon
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-# Prefer Mounted Volumes = no
-}
-
-Job {
- Name = "migrate-job"
- Type = Migrate
- Level = Full
- Client=@hostname@-fd
- FileSet="Full Set"
- Messages = Standard
- Storage = DiskChanger
- Write Bootstrap = "@working_dir@/migratejob.bsr"
- Pool = Default
- Maximum Concurrent Jobs = 4
- Selection Type = Job
- Selection Pattern = ".*Save"
-}
-
-Job {
- Name = "migrate-volume"
- Type = Migrate
- Level = Full
- Client=@hostname@-fd
- FileSet="Full Set"
- Messages = Standard
- Storage = DiskChanger
- Write Bootstrap = "@working_dir@/migratevol.bsr"
- Pool = Default
- Maximum Concurrent Jobs = 4
- Selection Type = Volume
- Selection Pattern = "File*"
-}
-
-Job {
- Name = "migrate-occupancy"
- Type = Migrate
- Level = Full
- Client=@hostname@-fd
- FileSet="Full Set"
- Messages = Standard
- Storage = DiskChanger
- Write Bootstrap = "@working_dir@/migratejob.bsr"
- Pool = Default
- Maximum Concurrent Jobs = 4
- Selection Type = PoolOccupancy
-}
-
-Job {
- Name = "migrate-time"
- Type = Migrate
- Level = Full
- Client=@hostname@-fd
- FileSet="Full Set"
- Messages = Standard
- Storage = DiskChanger
- Write Bootstrap = "@working_dir@/migratejob.bsr"
- Pool = Default
- Maximum Concurrent Jobs = 4
- Selection Type = PoolTime
-}
-
-
-
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include { Options { signature=MD5 }
- File = </tmp/file-list
- }
-}
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definition of DDS Virtual tape disk storage device
-Storage {
- Name = DiskChanger
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
- Device = DiskChanger # must be same as Device in Storage daemon
- Media Type = DiskChanger # must be same as MediaType in Storage daemon
- Maximum Concurrent Jobs = 4
- Autochanger = yes
-}
-
-# Definition of file storage device
-Storage {
- Name = File
- Address = @hostname@
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
- Device = FileStorage
- Media Type = File
- Maximum Concurrent Jobs = 5
-}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression Job %j\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression Job %j\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all, !terminate
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-#
-# Message delivery for daemon messages (no job).
-Messages {
- Name = Daemon
- mailcommand = "@sbindir@/bsmtp -h @smtp_host@ -f \"\(Bacula\) %r\" -s \"Bacula daemon message\" %r"
- mail = @job_email@ = all, !skipped
- console = all, !skipped, !saved
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
- NextPool = Full
- Storage = File
- Migration High Bytes = 40M
- Migration Low Bytes = 20M
- Migration Time = 60
-}
-
-Pool {
- Name = Full
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
- Storage = DiskChanger
-}
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.33
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
- Messages = Daemon
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-# Prefer Mounted Volumes = no
-}
-
-Job {
- Name = "NightlySave1"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-# Prefer Mounted Volumes = no
- Client Run Before Job = "/bin/sleep 120"
-}
-
-Job {
- Name = "NightlySave2"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-# Prefer Mounted Volumes = no
-}
-
-Job {
- Name = "VerifyTape"
- Type = Verify
- Level = VolumeToCatalog
- Client=@hostname@-fd
- FileSet="Verify Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-# Prefer Mounted Volumes = no
-}
-
-
-
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include { Options { signature=MD5 }
- File = </tmp/file-list
- }
-}
-
-FileSet {
- Name = "Verify Set"
- Include {
- Options {
- signature=MD5
- verify=pins1
- }
- File = </tmp/file-list
- }
-}
-
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definition of DDS tape storage device
-Storage {
- Name = DDS-4
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
- Device = DDS-4 # must be same as Device in Storage daemon
- Media Type = DDS-4 # must be same as MediaType in Storage daemon
- Maximum Concurrent Jobs = 4
-# Autochanger = yes
-}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression Job %j\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression Job %j\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all, !terminate
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-#
-# Message delivery for daemon messages (no job).
-Messages {
- Name = Daemon
- mailcommand = "@sbindir@/bsmtp -h @smtp_host@ -f \"\(Bacula\) %r\" -s \"Bacula daemon message\" %r"
- mail = @job_email@ = all, !skipped
- console = all, !skipped, !saved
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
-
-Pool {
- Name = Full
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
-
-Pool {
- Name = Inc
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
-
-Pool {
- Name = Scratch
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.33
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
- Messages = Daemon
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=Tibs
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-}
-
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=Tibs
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Enable VSS = yes
- Include { Options { signature=MD5 }
- File = "c:"
- }
-}
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# Client (File Services) to backup
-Client {
- Name = Tibs
- Address = tibs
- FDPort = 9102
- Catalog = MyCatalog
- Password = "xBzFq+a9llZyGyfMaNO9e3outP86/1AUAT8P34RoT62G"
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definition of DDS tape storage device
-Storage {
- Name = DDS-4
- Address = 192.168.68.112 # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
- Device = DDS-4 # must be same as Device in Storage daemon
- Media Type = DDS-4 # must be same as MediaType in Storage daemon
- AutoChanger = yes
- Maximum Concurrent Jobs = 4
-}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression Job %j\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression Job %j\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all, !terminate
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-#
-# Message delivery for daemon messages (no job).
-Messages {
- Name = Daemon
- mailcommand = "@sbindir@/bsmtp -h @smtp_host@ -f \"\(Bacula\) %r\" -s \"Bacula daemon message\" %r"
- mail = @job_email@ = all, !skipped
- console = all, !skipped, !saved
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.39.27 (24 October 2006) -- debian testing/unstable
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- SubSysDirectory = "@subsysdir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3" # Console password
- Messages = Standard
-}
-
-JobDefs {
- Name = "DefaultJob"
- Type = Backup
- Level = Incremental
- Client = @hostname@-fd
- FileSet = FS_TESTJOB
- Storage = File
- Messages = Standard
- Pool = Default
- Priority = 10
- Maximum Concurrent Jobs = 16
-}
-
-FileSet {
- Name = FS_TESTJOB
- Include {
- File=</tmp/file-list
- }
-}
-
-#dir: BeforeJob: run command "/bin/echo RunBeforeJob"
-#fd: ClientRunBeforeJob: ClientRunBeforeJob
-#fd: ClientAfterJob: run command "/bin/echo ClientRunAfterJob"
-#dir: AfterJob: run command "/bin/echo RunAfterJob"
-
-Job {
- Name = "RUN_ALL_OK"
- JobDefs = DefaultJob
- FileSet = FS_TESTJOB
- RunBeforeJob = "/bin/echo RunBeforeJob"
- ClientRunBeforeJob = "/bin/echo ClientRunBeforeJob"
- Run After Job = "/bin/echo RunAfterJob"
- ClientRunAfterJob = "/bin/echo ClientRunAfterJob"
-}
-
-#After job are after before job
-Job {
- Name = "RUN_DIR_FAILED_BUG"
- FileSet = FS_TESTJOB
- JobDefs = DefaultJob
- Run After Failed Job = "/bin/echo RunAfterFailedJob"
- RunBeforeJob = "/bin/false"
-}
-
-#@hostname@-dir: BeforeJob: run command "/bin/false"
-#@hostname@-dir: BeforeJob: RunAfterFailedJob
-Job {
- Name = "RUN_DIR_FAILED"
- FileSet = FS_TESTJOB
- JobDefs = DefaultJob
- RunBeforeJob = "/bin/false RUN_DIR_FAILED"
- Run After Failed Job = "/bin/echo RunAfterFailedJob"
-}
-
-#@hostname@-fd: ClientBeforeJob: run command "/bin/false RUN_FD_FAILED1"
-#@hostname@-fd: ClientBeforeJob: run command "/bin/false RUN_FD_FAILED2"
-#@hostname@-dir: AfterJob: run command "/bin/echo RunAfterFailedJob"
-Job {
- Name = "RUN_FD_FAILED"
- FileSet = FS_TESTJOB
- JobDefs = DefaultJob
- RunScript {
- Command = "/bin/false RUN_FD_FAILED1"
- abortjobonerror = no
- RunsWhen = Before
- }
- RunScript {
- Command = "/bin/false RUN_FD_FAILED2"
- abortjobonerror = yes
- RunsWhen = Before
- }
-
- Run After Failed Job = "/bin/echo RunAfterFailedJob"
-}
-
-#@hostname@-fd: ClientBeforeJob: run command "/bin/false RUN_FD_WARNING"
-#Backup OK -- with warnings
-Job {
- Name = "RUN_FD_WARNING"
- FileSet = FS_TESTJOB
- JobDefs = DefaultJob
- RunScript {
- Command = "/bin/false RUN_FD_WARNING"
- abortjobonerror = no
- RunsWhen = Before
- }
- Run After Failed Job = "/bin/echo RunAfterFailedJob"
-}
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definiton of file storage device
-Storage {
- Name = File
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage
- Media Type = File
- Maximum Concurrent Jobs = 4
-}
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-
-Messages {
- Name = Standard
- stdout = all, !skipped
-}
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.39
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-Autochanger {
- Name = DDS-4
- Changer Device = @disk_drive@/conf
- Changer Command ="@scriptdir@/disk-changer %c %o %S %a %d"
- Device = Drive-0, Drive-1
-}
-
-Device {
- Name = Drive-0
- Device Type = File
- Media Type = DDS-4
- Archive Device = @disk_drive@/drive0
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 0
- AlwaysOpen = yes;
- RemovableMedia = yes;
-# Maximum File Size = 1000000
-}
-
-Device {
- Name = Drive-1
- Device Type = File
- Media Type = DDS-4
- Archive Device = @disk_drive@/drive1
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 1
- AlwaysOpen = yes;
- RemovableMedia = yes;
-# Maximum File Size = 1000000
-}
-
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.39
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-Autochanger {
- Name = DDS-4
- Changer Device = @disk_drive@/conf
- Changer Command ="@scriptdir@/disk-changer %c %o %S %a %d"
- Device = Drive-0
-}
-
-Device {
- Name = Drive-0 #
- Device Type = File
- Media Type = DDS-4
- Archive Device = @disk_drive@/drive0
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 0
- AlwaysOpen = yes;
- RemovableMedia = yes;
-# Maximum File Size = 1000000
-}
-
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-Autochanger {
- Name = DDS-4
- Changer Device = @autochanger@
- Changer Command ="@scriptdir@/mtx-changer %c %o %S %a %d"
- Device = Drive-0, Drive-1
-}
-
-Device {
- Name = Drive-0
- Media Type = DDS-4
- Archive Device = @tape_drive@
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 0
- AlwaysOpen = yes;
- RemovableMedia = yes;
- @@sbindir@/tape_options
-# Maximum File Size = 1000000
-}
-
-Device {
- Name = Drive-1
- Media Type = DDS-4
- Archive Device = @tape_drive1@
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 1
- AlwaysOpen = yes;
- RemovableMedia = yes;
- @@sbindir@/tape_options
-# Maximum File Size = 1000000
-}
-
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-Autochanger {
- Name = DDS-4
- Changer Device = @autochanger@
- Changer Command ="@scriptdir@/mtx-changer %c %o %S %a %d"
- Device = Drive-0
-}
-
-Device {
- Name = Drive-0 #
- Media Type = DDS-4
- Archive Device = @tape_drive@
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 0
- AlwaysOpen = yes;
- RemovableMedia = yes;
- @@sbindir@/tape_options
-# Maximum File Size = 1000000
-}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.39
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-Autochanger {
- Name = DiskChanger
- Changer Device = @disk_drive@/conf
- Changer Command ="@scriptdir@/disk-changer %c %o %S %a %d"
- Device = Drive-0
-}
-
-Device {
- Name = Drive-0 #
- Device Type = File
- Media Type = DiskChanger
- Archive Device = @disk_drive@/drive0
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 0
- AlwaysOpen = yes;
- RemovableMedia = yes;
-# Maximum File Size = 1000000
-}
-
-Device {
- Name = FileStorage
- Media Type = File
- Archive Device = @tmpdir@
- LabelMedia = yes; # lets Bacula label unlabeled media
- Random Access = Yes;
- AutomaticMount = yes; # when device opened, read it
- RemovableMedia = no;
- AlwaysOpen = no;
-}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-
-Device {
- Name = DDS-4 #
- Media Type = DDS-4
- Archive Device = @tape_drive@
- AutomaticMount = yes; # when device opened, read it
- AlwaysOpen = yes;
- RemovableMedia = yes;
- @@sbindir@/tape_options
-# Maximum File Size = 1000000
-# MaximumVolumeSize = 400M
-}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = rufus-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "/home/kern/bacula/regress/working"
- Pid Directory = "/home/kern/bacula/regress/working"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = rufus-dir
- Password = "BzlEl8haeFmnv/Lv8V6zDzUBgFFQNsUtny6VkmccQpOy"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-
-Device {
- Name = FileStorage
- Media Type = File
- Archive Device = @tmpdir@
- LabelMedia = yes; # lets Bacula label unlabeled media
- Random Access = Yes;
- AutomaticMount = yes; # when device opened, read it
- RemovableMedia = no;
- AlwaysOpen = no;
-}
-
-#Device {
-# Name = DDS-4 #
-# Media Type = DDS-4
-# Archive Device = /dev/nst0
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = yes;
-# RemovableMedia = yes;
-#}
-
-#
-# A very old Exabyte with no end of media detection
-#
-#Device {
-# Name = "Exabyte 8mm"
-# Media Type = "8mm"
-# Archive Device = /dev/nst0
-# Hardware end of medium = No;
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = Yes;
-# RemovableMedia = yes;
-#}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = rufus-dir = all, !terminate
-}
+++ /dev/null
-#!/bin/sh
-#
-# Check for zombie jobs (not terminated).
-# Also scan logs for ERROR messages
-#
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA 2>&1 >/dev/null
-@output tmp/dir.out
-status dir
-@output tmp/fd.out
-status client
-@output tmp/sd.out
-status $1
-@output
-quit
-END_OF_DATA
-grep "No Jobs running." tmp/dir.out 2>&1 >/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " !!!! Zombie Jobs in Director !!!!"
- echo " !!!! Zombie Jobs in Director !!!!" >>test.out
- echo " "
-fi
-grep "No Jobs running." tmp/fd.out 2>&1 >/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " !!!! Zombie Jobs in File daemon !!!!"
- echo " !!!! Zombie Jobs in File daemon !!!!" >>test.out
- echo " "
-fi
-grep "No Jobs running." tmp/sd.out 2>&1 >/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " !!!! Zombie Jobs in Storage daemon !!!!"
- echo " !!!! Zombie Jobs in Storage daemon !!!!" >>test.out
- echo " "
-fi
-grep "ERROR" tmp/log*.out 2>&1 >/dev/null
-if [ $? = 0 ] ; then
- echo " "
- echo " !!!! ERROR in log output !!!!"
- echo " !!!! ERROR in log output !!!!" >>test.out
- echo " "
-fi
-grep "Fatal Error" tmp/log*.out 2>&1 >/dev/null
-if [ $? = 0 ] ; then
- echo " "
- echo " !!!! Fatal Error in log output !!!!"
- echo " !!!! Fatal Error in log output !!!!" >>test.out
- echo " "
-fi
-
+++ /dev/null
-#!/bin/sh
-#
-# Cleanup left over files -- both before and after test run
-#
-rm -rf /tmp/FileVolume* tmp/FileVolume*
-rm -rf /tmp/TestVolume001 /tmp/bacula-restores /tmp/Small*
-rm -rf tmp/original tmp/bacula-restores tmp/Small* tmp/TestVolume*
-rm -rf tmp/restored tmp/largefile tmp/bscan.bsr tmp/log*.out
-rm -rf /tmp/sed_tmp /tmp/file-list
-rm -rf tmp/build tmp/restore-list tmp/restore2-list
-rm -rf tmp/fd.out tmp/dir.out tmp/sd.out
-rm -rf working/log tmp/TEST-*
-rm -rf working/*.bsr
-rm -rf tmp/disk-changer /tmp/disk-changer
-find . -name "gigaslam.gif" -exec rm -f {} \;
-
-bin/bacula stop 2>&1 >/dev/null
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges >/dev/null 2>&1
-cd ..
+++ /dev/null
-#!/bin/sh
-#
-# Cleanup left over files -- both before and after test run
-#
-scripts/cleanup
-
-if test x@autochanger@ != x/dev/null; then
- slot=`bin/mtx-changer @autochanger@ loaded 0 @tape_drive1@ 1`
- echo "Slot $slot in drive 1"
- if test x$slot != x0 ; then
- echo "unload slot $slot in drive 1"
- bin/mtx-changer @autochanger@ unload $slot @tape_drive1@ 1
- fi
- slot=`bin/mtx-changer @autochanger@ loaded 0 @tape_drive@ 0`
- echo "Slot $slot in drive 0"
- if test x$slot != x0 ; then
- echo "unload slot $slot in drive 0"
- bin/mtx-changer @autochanger@ unload $slot @tape_drive@ 0
- fi
-
-
- slot=`bin/mtx-changer @autochanger@ loaded 0 @tape_drive1@ 1`
- if test x$slot != x2; then
- echo "load slot 2 in drive 1"
- bin/mtx-changer @autochanger@ load 2 @tape_drive1@ 1
- fi
- echo "WEOF drive 1"
- mt -f @tape_drive1@ rewind
- mt -f @tape_drive1@ weof
- echo "unload slot 2 in drive 1"
- bin/mtx-changer @autochanger@ unload 2 @tape_drive1@ 1
-
- slot=`bin/mtx-changer @autochanger@ loaded 0 @tape_drive@ 0`
- echo "Slot $slot in drive 0"
- if test x$slot != x1; then
- echo "load slot 1 in drive 0"
- bin/mtx-changer @autochanger@ load 1 @tape_drive@ 0
- fi
- echo "WEOF drive 0"
- mt -f @tape_drive@ rewind
- mt -f @tape_drive@ weof
- echo "unload slot 1 from drive 0"
- bin/mtx-changer @autochanger@ unload 1 @tape_drive@ 0
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Cleanup left over files -- both before and after test run
-#
-scripts/cleanup
-
-if test x@autochanger@ != x/dev/null; then
- drive=`bin/mtx-changer @autochanger@ loaded 0 dummy 0`
- if test x${drive} != x2; then
- bin/mtx-changer @autochanger@ unload 0 @tape_drive@ 0
- bin/mtx-changer @autochanger@ load 2 @tape_drive@ 0
- fi
- mt -f @tape_drive@ rewind
- mt -f @tape_drive@ weof
-fi
-
-
-#
-# If we have an autochanger always load tape in slot 1
-#
-if test x@autochanger@ != x/dev/null; then
- drive=`bin/mtx-changer @autochanger@ loaded 0 dummy 0`
- if test x${drive} != x1; then
- bin/mtx-changer @autochanger@ unload 0 @tape_drive@ 0
- bin/mtx-changer @autochanger@ load 1 @tape_drive@ 0
- fi
-fi
-
-mt -f @tape_drive@ rewind
-mt -f @tape_drive@ weof
+++ /dev/null
-#!/bin/sh
-#
-# Cleanup left over files -- both before and after test run
-#
-scripts/cleanup
-
-mt -f @tape_drive@ rewind
-mt -f @tape_drive@ weof
+++ /dev/null
-#!/bin/sh
-#
-# Setup for using the Virtual Disk Changer (simulates tape changer)
-#
-/bin/cp -f scripts/bacula-dir-tape.conf bin/bacula-dir.conf
-/bin/cp -f scripts/bacula-sd-2disk.conf bin/bacula-sd.conf
-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
-outf="tmp/sed_tmp"
-echo "s%# Autochanger = yes% Autochanger = yes%g" >${outf}
-cp bin/bacula-dir.conf tmp/1
-sed -f ${outf} tmp/1 >bin/bacula-dir.conf
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/bacula-dir-tape.conf bin/bacula-dir.conf
-/bin/cp -f scripts/bacula-sd-2disk-drive.conf bin/bacula-sd.conf
-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
-outf="tmp/sed_tmp"
-echo "s%# Autochanger = yes% Autochanger = yes%g" >${outf}
-cp bin/bacula-dir.conf tmp/1
-sed -f ${outf} tmp/1 >bin/bacula-dir.conf
-
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/bacula-dir-tape.conf bin/bacula-dir.conf
-/bin/cp -f scripts/bacula-sd-2drive.conf bin/bacula-sd.conf
-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
-outf="tmp/sed_tmp"
-echo "s%# Autochanger = yes% Autochanger = yes%g" >${outf}
-cp bin/bacula-dir.conf tmp/1
-sed -f ${outf} tmp/1 >bin/bacula-dir.conf
-
-# get proper SD tape definitions
-cp -f scripts/linux_tape_options bin/tape_options
-if test x`uname` = xFreeBSD ; then
- cp -f scripts/freebsd_tape_options bin/tape_options
-fi
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/bacula-dir-tape.conf bin/bacula-dir.conf
-/bin/cp -f scripts/bacula-sd-2tape.conf bin/bacula-sd.conf
-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
-outf="tmp/sed_tmp"
-echo "s%# Autochanger = yes% Autochanger = yes%g" >${outf}
-cp bin/bacula-dir.conf tmp/1
-sed -f ${outf} tmp/1 >bin/bacula-dir.conf
-
-# get proper SD tape definitions
-cp -f scripts/linux_tape_options bin/tape_options
-if test x`uname` = xFreeBSD ; then
- cp -f scripts/freebsd_tape_options bin/tape_options
-fi
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/bacula-dir.conf bin/bacula-dir.conf
-/bin/cp -f scripts/bacula-sd.conf bin/bacula-sd.conf
-/bin/cp -f scripts/bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/bconsole.conf bin/bconsole.conf
-
-# get proper SD tape definitions
-cp -f scripts/linux_tape_options bin/tape_options
-if test x`uname` = xFreeBSD ; then
- cp -f scripts/freebsd_tape_options bin/tape_options
-fi
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/new-test-bacula-dir.conf bin/bacula-dir.conf
-/bin/cp -f scripts/test-bacula-sd.conf bin/bacula-sd.conf
-/bin/cp -f scripts/crypto-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
-/bin/cp -f scripts/cryptokeypair.pem bin/cryptokeypair.pem
+++ /dev/null
-#!/bin/sh
-#
-# Setup for using the Virtual Disk Changer (simulates tape changer)
-#
-/bin/cp -f scripts/bacula-dir-migration.conf bin/bacula-dir.conf
-/bin/cp -f scripts/bacula-sd-migration.conf bin/bacula-sd.conf
-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/bacula-dir-tape.conf bin/bacula-dir.conf
-/bin/cp -f scripts/bacula-sd-tape.conf bin/bacula-sd.conf
-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
-
-# get proper SD tape definitions
-cp -f scripts/linux_tape_options bin/tape_options
-if test x`uname` = xFreeBSD ; then
- cp -f scripts/freebsd_tape_options bin/tape_options
-fi
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/new-test-bacula-dir.conf bin/bacula-dir.conf
-/bin/cp -f scripts/test-bacula-sd.conf bin/bacula-sd.conf
-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
-
-# get proper SD tape definitions
-cp -f scripts/linux_tape_options bin/tape_options
-if test x`uname` = xFreeBSD ; then
- cp -f scripts/freebsd_tape_options bin/tape_options
-fi
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/testa-bacula-dir.conf bin/bacula-dir.conf
-/bin/cp -f scripts/test-bacula-sd.conf bin/bacula-sd.conf
-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
-
-# get proper SD tape definitions
-cp -f scripts/linux_tape_options bin/tape_options
-if test x`uname` = xFreeBSD ; then
- cp -f scripts/freebsd_tape_options bin/tape_options
-fi
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/win32-bacula-dir-tape.conf bin/bacula-dir.conf
-/bin/cp -f scripts/win32-bacula-sd-tape.conf bin/bacula-sd.conf
-/bin/cp -f scripts/win32-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/bconsole.conf
-
-# get proper SD tape definitions
-cp -f scripts/linux_tape_options bin/tape_options
-if test x`uname` = xFreeBSD ; then
- cp -f scripts/freebsd_tape_options bin/tape_options
-fi
+++ /dev/null
-#
-# Default Bacula File Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# There is not much to change here except perhaps the
-# File daemon Name to
-#
-
-#
-# List Directors who are permitted to contact this File daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc"
-}
-
-#
-# "Global" File daemon configuration specifications
-#
-FileDaemon { # this is me
- Name = @hostname@-fd
- FDport = 8102 # where we listen for the director
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- SubSys Directory = "@subsysdir@"
- PKI Signatures = Yes
- PKI Encryption = Yes
- PKI Keypair = "@scriptdir@/cryptokeypair.pem"
-}
-
-# Send all messages except skipped files back to Director
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
------BEGIN RSA PRIVATE KEY-----
-MIIBOgIBAAJBAKIc649Amif6weq+c8rVtS7jyn7E9oZ9Irrl9WviQZi0+J2OLgCi
-PNaj/FzPhTIgBBRFEP0ZU5DfVv6CoXKbpr8CAwEAAQJAQbvUUFvzpi5pnxPmw+Jv
-+zlmjIy1Icdv47UHFN3Dl3V0+X05g12xUlnyNKzo2jlSwkBi1w8AJCMV6/TnnLiI
-AQIhAM4SH9cb01DUH+1O5gk90GgNYW1Aq2vL1vygm02kppi/AiEAyWQ9eAILPXhX
-H3a7mEj8z1bCTBiVrhe73NUjim4QcgECIEC3hHRj8ruBwv0eODRSy27CNQTAuJVE
-ESKJtfxuZzu1AiEAotXYFbahW/x3hUs9d25ca1EdHOYr8G3kSjRT3lQMHAECIHBl
-uX+Ywc1jjWhc+vN2ZrLWkKMVbrd+SWOPUQGroM0j
------END RSA PRIVATE KEY-----
------BEGIN CERTIFICATE-----
-MIICKzCCAdWgAwIBAgIJAO4x/m+tHX8HMA0GCSqGSIb3DQEBBQUAMEUxCzAJBgNV
-BAYTAkFVMRMwEQYDVQQIEwpTb21lLVN0YXRlMSEwHwYDVQQKExhJbnRlcm5ldCBX
-aWRnaXRzIFB0eSBMdGQwHhcNMDYxMjA0MDMxMzUwWhcNMDcwMTAzMDMxMzUwWjBF
-MQswCQYDVQQGEwJBVTETMBEGA1UECBMKU29tZS1TdGF0ZTEhMB8GA1UEChMYSW50
-ZXJuZXQgV2lkZ2l0cyBQdHkgTHRkMFwwDQYJKoZIhvcNAQEBBQADSwAwSAJBAKIc
-649Amif6weq+c8rVtS7jyn7E9oZ9Irrl9WviQZi0+J2OLgCiPNaj/FzPhTIgBBRF
-EP0ZU5DfVv6CoXKbpr8CAwEAAaOBpzCBpDAdBgNVHQ4EFgQUiGz2I+bks0nCHyCI
-IwuV3DpDPMwwdQYDVR0jBG4wbIAUiGz2I+bks0nCHyCIIwuV3DpDPMyhSaRHMEUx
-CzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpTb21lLVN0YXRlMSEwHwYDVQQKExhJbnRl
-cm5ldCBXaWRnaXRzIFB0eSBMdGSCCQDuMf5vrR1/BzAMBgNVHRMEBTADAQH/MA0G
-CSqGSIb3DQEBBQUAA0EAkjFYcs9rrpdURlBaNlbud68VlA5rU+Bv4keYx41DUmqo
-sXtkQZENR9iYYYhOUso1/1dwQgrt3egjTZTtq7o5zw==
------END CERTIFICATE-----
+++ /dev/null
-#!/bin/sh
-#
-if test $# != 6 ; then
- echo "First arg must be email name"
- echo " and the second must be a tape drive"
- echo " and the third must be a tape control name or /dev/null"
- echo " and the fourth must be the full path to the mtx program"
- echo " and the fifth must be tape drive 1 or /dev/null"
- echo " and the sixth must be the smtp or email host"
- exit 1
-fi
-cwd=`pwd`
-mkdir -p ${cwd}/bin
-out="/tmp/sed_tmp"
-HOST="localhost"
-# Create sed command script
-echo "s%@sbindir@%${cwd}/bin%g" >${out}
-echo "s%@scriptdir@%${cwd}/bin%g" >>${out}
-echo "s%@working_dir@%${cwd}/working%g" >>${out}
-echo "s%@piddir@%${cwd}/working%g" >>${out}
-echo "s%@subsysdir@%${cwd}/working%g" >>${out}
-echo "s%@job_email@%${1}%g" >>${out}
-echo "s%@tape_drive@%${2}%g" >>${out}
-echo "s%@autochanger@%${3}%g" >>${out}
-echo "s%@tmpdir@%${cwd}/tmp%g" >>${out}
-echo "s%@hostname@%${HOST}%g" >>${out}
-echo "s%@changer_path@%${4}%g" >>${out}
-echo "s%@tape_drive1@%${5}%g" >>${out}
-echo "s%@smtp_host@%${6}%g" >>${out}
-echo "s%@disk_drive@%${cwd}/tmp/disk-changer%g" >>${out}
-
-echo "AUTOCHANGER=\"${3}\"" >config.out
-echo "TAPE_DRIVE1=\"${5}\"" >>config.out
-
-
-# process .in files with sed script
-sed -f ${out} ${cwd}/scripts/test-bacula-dir.conf.in >${cwd}/scripts/test-bacula-dir.conf
-sed -f ${out} ${cwd}/scripts/new-test-bacula-dir.conf.in >${cwd}/scripts/new-test-bacula-dir.conf
-sed -f ${out} ${cwd}/scripts/testa-bacula-dir.conf.in >${cwd}/scripts/testa-bacula-dir.conf
-sed -f ${out} ${cwd}/scripts/test-bacula-fd.conf.in >${cwd}/scripts/test-bacula-fd.conf
-sed -f ${out} ${cwd}/scripts/test-bacula-sd.conf.in >${cwd}/scripts/test-bacula-sd.conf
-sed -f ${out} ${cwd}/scripts/test-console.conf.in >${cwd}/scripts/test-console.conf
-sed -f ${out} ${cwd}/scripts/crypto-bacula-fd.conf.in >${cwd}/scripts/crypto-bacula-fd.conf
-sed -f ${out} ${cwd}/scripts/bacula-dir-tape.conf.in >${cwd}/scripts/bacula-dir-tape.conf
-sed -f ${out} ${cwd}/scripts/bacula-dir-migration.conf.in >${cwd}/scripts/bacula-dir-migration.conf
-sed -f ${out} ${cwd}/scripts/win32-bacula-dir-tape.conf.in >${cwd}/scripts/win32-bacula-dir-tape.conf
-sed -f ${out} ${cwd}/scripts/bacula-sd-tape.conf.in >${cwd}/scripts/bacula-sd-tape.conf
-sed -f ${out} ${cwd}/scripts/bacula-sd-2tape.conf.in >${cwd}/scripts/bacula-sd-2tape.conf
-sed -f ${out} ${cwd}/scripts/bacula-sd-migration.conf.in >${cwd}/scripts/bacula-sd-migration.conf
-sed -f ${out} ${cwd}/scripts/bacula-sd-2disk.conf.in >${cwd}/scripts/bacula-sd-2disk.conf
-sed -f ${out} ${cwd}/scripts/bacula-sd-2drive.conf.in >${cwd}/scripts/bacula-sd-2drive.conf
-sed -f ${out} ${cwd}/scripts/bacula-sd-2disk-drive.conf.in >${cwd}/scripts/bacula-sd-2disk-drive.conf
-sed -f ${out} ${cwd}/scripts/cleanup-tape.in >${cwd}/scripts/cleanup-tape
-sed -f ${out} ${cwd}/scripts/cleanup-2tape.in >${cwd}/scripts/cleanup-2tape
-sed -f ${out} ${cwd}/scripts/cleanup-2drive.in >${cwd}/scripts/cleanup-2drive
-sed -f ${out} ${cwd}/scripts/prepare-two-tapes.in >${cwd}/scripts/prepare-two-tapes
-sed -f ${out} ${cwd}/scripts/bacula-dir.conf.testrunscript.in >${cwd}/scripts/bacula-dir.conf.testrunscript
-
-cp ${cwd}/bin/bacula-sd.conf /tmp/bac$$
-sed s%/tmp%${cwd}/tmp%g /tmp/bac$$ >${cwd}/bin/bacula-sd.conf
-chmod 777 ${cwd}/scripts/cleanup-*tape ${cwd}/scripts/cleanup-*drive ${cwd}/scripts/prepare-two-tapes
-rm -f /tmp/bac$$
-cp ${cwd}/bin/mtx-changer /tmp/bac$$
-sed "s%^MTX.*$%MTX=${4}%g" /tmp/bac$$ >${cwd}/bin/mtx-changer
-chmod 777 ${cwd}/bin/mtx-changer
-
-# get proper SD tape definitions
-cp -f ${cwd}/scripts/linux_tape_options ${cwd}/bin/tape_options
-if test x`uname` = xFreeBSD ; then
- cp -f ${cwd}/scripts/freebsd_tape_options ${cwd}/bin/tape_options
-fi
-
-rm -f ${out}
-rm -f /tmp/bac$$
+++ /dev/null
-dev/ptmx
-dev/pts
-dev/rd/c5d2
-dev/rd
-dev/shm
+++ /dev/null
-etc/mail/statistics
+++ /dev/null
-lib/ld-2.2.5.so
-lib/libtermcap.so.2.0.8
-lib/libc-2.2.5.so
-lib/libnsl-2.2.5.so
-lib/libnss_files-2.2.5.so
+++ /dev/null
-/build/configure
-/build/src/stored/bextract
-/build/src/tools/testfind
-/build/Makefile.in
-/build/src/dird/bacula-dir
-/build/src/console/bconsole
-/build/src/filed/bacula-fd
-/build/src/findlib/find_one.c
-/build/src/jcr.h
-/build/platforms/Makefile.in
-/build/platforms/redhat/Makefile.in
-/build/scripts/Makefile.in
-/build/src/win32/filed/winservice.cpp
-/build/src/filed/restore.c
-/build/autoconf/configure.in
-/build/examples/afs-bacula
-/build/src/win32/Makefile.inc.in
-/build/src/win32/installer/winbacula.nsi
-/build/autoconf/configure.in
-/build/src/version.h
-/build/src/lib/message.c
-/build/src/lib/bnet_server.c
-/build/src/lib/libbac.a
+++ /dev/null
-#
-# FreeBSD tape drive options
-#
-Hardware End of Medium = no
-Fast Forward Space File = no
-BSF at EOM = yes
-Backward Space Record = no
-TWO EOF = yes
+++ /dev/null
-#
-# A set of useful functions to be sourced in each test
-#
-
-start_test()
-{
- echo " "
- echo " "
- echo " === Starting $TestName at `date +%R:%S` ==="
- echo " === Starting $TestName at `date +%R:%S` ===" >>working/log
- echo " "
-}
-
-set_debug()
-{
- debug=$1
- if test "$debug" -eq 1 ; then
- out="tee"
- else
- out="output"
- fi
-}
-
-run_bacula()
-{
- if test "$debug" -eq 1 ; then
- bin/bacula start
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
- else
- bin/bacula start 2>&1 >/dev/null
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
- fi
-}
-
-run_bconsole()
-{
- if test "$debug" -eq 1 ; then
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
- else
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
- fi
-}
-
-run_btape()
-{
- if test "$debug" -eq 1 ; then
- cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 | tee tmp/log1.out
- else
- cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 2>&1 >tmp/log1.out
- fi
-}
-
-run_bscan()
-{
- if test "$debug" -eq 1 ; then
- bin/bscan $* | tee tmp/log.out
- else
- bin/bscan $* 2>&1 >/dev/null
- fi
-}
-
-
-stop_bacula()
-{
- bin/bacula stop 2>&1 >/dev/null
-}
-
-check_for_zombie_jobs()
-{
- scripts/check_for_zombie_jobs $1
-}
-
-change_jobname()
-{
- if test $# -eq 1; then
- oldname=NightlySave
- newname=$1
- else
- oldname=$1
- newname=$2
- fi
- rm -f bin/1
- mv bin/bacula-dir.conf bin/1
- echo "s%${oldname}%${newname}%g" >tmp/1
- sed -f tmp/1 bin/1 >bin/bacula-dir.conf
-# echo "Job ${oldname} changed to ${newname}"
-}
-
-check_two_logs()
-{
- grep "^ Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
- bstat=$?
- grep "^ Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
- rstat=$?
-}
-
-check_restore_diff()
-{
- diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
- dstat=$?
-}
-
-check_restore_tmp_build_diff()
-{
- diff -r tmp/build tmp/bacula-restores${cwd}/tmp/build 2>&1 >/dev/null
- dstat=$?
-}
-
-end_test()
-{
- if [ $dstat != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! $TestName Bacula source failed!!! !!!!! "
- echo " !!!!! $TestName failed!!! !!!!! " >>test.out
- if [ $bstat != 0 -o $rstat != 0 ] ; then
- echo " !!!!! Bad Job termination status !!!!! "
- echo " !!!!! Bad Job termination status !!!!! " >>test.out
- else
- echo " !!!!! Restored files differ !!!!! "
- echo " !!!!! Restored files differ !!!!! " >>test.out
- fi
- echo " "
- else
- echo " ===== $TestName Bacula source OK `date +%R:%S` ===== "
- echo " ===== $TestName OK `date +%R:%S` ===== " >>test.out
- if test "$debug" -eq 0 ; then
- scripts/cleanup
- fi
- fi
-}
-
-copy_tape_confs()
-{
- scripts/copy-tape-confs
- scripts/cleanup-tape
-}
-
-copy_test_confs()
-{
- scripts/copy-test-confs
- scripts/cleanup
-}
-
-
-# Save current directory
-cwd=`pwd`
+++ /dev/null
- Minimum Block Size = 32768
- Maximum Block Size = 32768
- Hardware End of Medium = yes
- BSF at EOM = yes
- Fast Forward Space File = yes
- Two EOF = no
-
+++ /dev/null
-# nothing needed for Linux
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.39 or later
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- SubSysDirectory = "@subsysdir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3" # Console password
- Messages = Standard
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData=yes
-}
-
-Job {
- Name = "MonsterSave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File1
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-Job {
- Name = "VerifyVolume"
- Type = Verify
- Level = VolumeToCatalog
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-Job {
- Name = "SparseTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="SparseSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-Job {
- Name = "CompressedTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="CompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Maximum Concurrent Jobs = 4
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-Job {
- Name = "SparseCompressedTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="SparseCompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-# Backup the catalog database (after the nightly save)
-Job {
- Name = "BackupCatalog"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Catalog"
-# Schedule = "WeeklyCycleAfterBackup"
- Storage = File
- Messages = Standard
- Pool = Default
- # This creates an ASCII copy of the catalog
- RunBeforeJob = "@sbindir@/make_catalog_backup -u bacula"
- # This deletes the copy of the catalog
- RunAfterJob = "@sbindir@/delete_catalog_backup"
- Write Bootstrap = "@working_dir@/BackupCatalog.bsr"
-}
-
-JobDefs {
- Name = "BackupJob"
- Type = Backup
- Pool = Default
- Storage = File
- Messages = Standard
- Priority = 10
-}
-
-Job {
- JobDefs = "BackupJob"
- Name = "bug621-job-1"
- Client = @hostname@-fd
- FileSet="Full Set"
- ClientRunBeforeJob = "/bin/sleep 60"
-}
-
-Job {
- JobDefs = "BackupJob"
- Name = "bug621-job-2"
- Client = @hostname@-fd
- FileSet = "Full Set"
- Max Run Time = 30
- Priority = 15
-}
-
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include { Options { signature=MD5 }
- File = </tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseSet"
- Include {
- Options {
- signature=MD5
- sparse=yes
- }
- File = </tmp/file-list
- }
-}
-
-FileSet {
- Name = "CompressedSet"
- Include {
- Options {
- signature=MD5
- compression=GZIP
- }
- File = </tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseCompressedSet"
- Include {
- Options {
- signature=MD5
- compression=GZIP
- sparse=yes
- }
- File = </tmp/file-list
- }
-}
-
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Level=Full 1st sun at 1:05
- Run = Level=Differential 2nd-5th sun at 1:05
- Run = Level=Incremental mon-sat at 1:05
-}
-
-# This schedule does the catalog. It starts after the WeeklyCycle
-Schedule {
- Name = "WeeklyCycleAfterBackup"
- Run = Level=Full sun-sat at 1:10
-}
-
-# This is the backup of the catalog
-FileSet {
- Name = "Catalog"
- Include {
- Options {
- signature=MD5
- }
- File = /home/kern/bacula/regress/bin/working/bacula.sql
- }
-}
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definiton of file storage device
-Storage {
- Name = File
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage
- Media Type = File
- Maximum Concurrent Jobs = 4
-}
-
-Storage {
- Name = File1
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage1
- Media Type = File1
- Maximum Concurrent Jobs = 4
-}
-
-
-# Definition of DLT tape storage device
-#Storage {
-# Name = DLTDrive
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = "HP DLT 80" # must be same as Device in Storage daemon
-# Media Type = DLT8000 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of DDS tape storage device
-#Storage {
-# Name = SDT-10000
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = SDT-10000 # must be same as Device in Storage daemon
-# Media Type = DDS-4 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of 8mm tape storage device
-#Storage {
-# Name = "8mmDrive"
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-# Device = "Exabyte 8mm"
-# MediaType = "8mm"
-#}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-Messages {
- Name = NoEmail
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- console = all, !skipped, !terminate
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-# Label Format = "TEST-${Year}-${Month:p/2/0/r}-${Day:p/2/0/r}:${NumVols}"
-}
+++ /dev/null
-#!/bin/sh
-#
-# Create fresh virtual disk changer directory
-#
-rm -rf tmp/disk-changer
-mkdir tmp/disk-changer
+++ /dev/null
-#!/bin/sh
-#
-# Create two blank tapes
-#
-# mt -f @tape_drive@ offline
-@changer_path@ -f @autochanger@ unload
-@changer_path@ -f @autochanger@ load 1
-mt -f @tape_drive@ rewind
-mt -f @tape_drive@ weof
-@changer_path@ -f @autochanger@ unload
-@changer_path@ -f @autochanger@ load 2
-mt -f @tape_drive@ rewind
-mt -f @tape_drive@ weof
-#@changer_path@ -f @autochanger@ unload
+++ /dev/null
-#!/bin/sh
-#
-# This is the configuration script for regression testing
-#
-
-CFLAGS="-g -O2 -Wall" \
- ./configure \
- --sbindir=$1/bin \
- --sysconfdir=$1/bin \
- --mandir=$1/bin \
- --with-pid-dir=$1/working \
- --with-subsys-dir=$1/working \
- --enable-smartalloc \
- --disable-readline \
- --with-working-dir=$1/working \
- --with-dump-email=$2 \
- --with-job-email=$2 \
- --with-smtp-host=$5 \
- $3 \
- --with-baseport=8101 \
- $4 \
- $6
-
-exit 0
+++ /dev/null
-#!/bin/sh
-#
-# Script to setup running Bacula regression tests
-#
-
-check_exit_code()
-{
- if [ $? != 0 ] ; then
- echo "Bad exit code giving up"
- exit 1
- fi
-}
-
-cwd=`pwd`
-if [ $# != 6 ] ; then
- echo "Incorrect number of arguments. Got $#. Need:"
- echo "setup bacula-src email-address --with-DBNAME --with-tcp-wrappers"
- echo " "
- exit 1
-fi
-if [ ! -d $1 ] ; then
- echo "Arg 1 must be a Bacula release directory."
- echo " "
- exit 1
-fi
-rm -rf build bin
-# Copy new source
-echo "Copying source from $1"
-cp -rp $1 build
-cp scripts/regress-config build
-cd build
-rm -f Makefile config.cache
-# Run Bacula configuration, make, install
-./regress-config ${cwd} $2 $3 $4 $5 $6
-check_exit_code
-make
-check_exit_code
-make install
-check_exit_code
-cp src/tools/testls ../bin
-check_exit_code
-
-cd ${cwd}
-bin/bacula stop
-
-mkdir -p working
-cd bin
-echo "Running database creation scripts"
-./create_bacula_database bacula
-./drop_bacula_tables bacula
-./make_bacula_tables
-./grant_bacula_privileges bacula
-cd ${cwd}
-# Start and stop Bacula to ensure conf files are OK
-bin/bacula start
-bin/bacula stop
-#
-# Save Bacula default conf files for later use
-#
-cp -f bin/*.conf scripts
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.33
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- SubSysDirectory = "@subsysdir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3" # Console password
- Messages = Daemon
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData=yes
-}
-
-Job {
- Name = "MonsterSave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File1
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-Job {
- Name = "VerifyVolume"
- Type = Verify
- Level = VolumeToCatalog
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-Job {
- Name = "SparseTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="SparseSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-Job {
- Name = "CompressedTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="CompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Maximum Concurrent Jobs = 4
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-# Max Run Time = 15 seconds
-}
-
-Job {
- Name = "SparseCompressedTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="SparseCompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-# Backup the catalog database (after the nightly save)
-Job {
- Name = "BackupCatalog"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Catalog"
-# Schedule = "WeeklyCycleAfterBackup"
- Storage = File
- Messages = Standard
- Pool = Default
- # This creates an ASCII copy of the catalog
- RunBeforeJob = "@sbindir@/make_catalog_backup -u bacula"
- # This deletes the copy of the catalog
- RunAfterJob = "@sbindir@/delete_catalog_backup"
- Write Bootstrap = "@working_dir@/BackupCatalog.bsr"
-}
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include { Options { signature=MD5 }
- File = </tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseSet"
- Include { Options { signature=MD5; sparse=yes }
- File=</tmp/file-list
- }
-}
-
-FileSet {
- Name = "CompressedSet"
- Include {
- Options { signature=MD5; compression=GZIP }
- File =</tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseCompressedSet"
- Include {
- Options {
- signature=MD5; compression=GZIP
- }
- File= </tmp/file-list
- }
-}
-
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Level=Full 1st sun at 1:05
- Run = Level=Differential 2nd-5th sun at 1:05
- Run = Level=Incremental mon-sat at 1:05
-}
-
-# This schedule does the catalog. It starts after the WeeklyCycle
-Schedule {
- Name = "WeeklyCycleAfterBackup"
- Run = Level=Full sun-sat at 1:10
-}
-
-# This is the backup of the catalog
-FileSet {
- Name = "Catalog"
- Include { Options { signature=MD5 }
- File=/home/kern/bacula/regress/bin/working/bacula.sql
- }
-}
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definiton of file storage device
-Storage {
- Name = File
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage
- Media Type = File
- Maximum Concurrent Jobs = 4
-}
-
-Storage {
- Name = File1
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage1
- Media Type = File1
- Maximum Concurrent Jobs = 4
-}
-
-
-# Definition of DLT tape storage device
-#Storage {
-# Name = DLTDrive
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = "HP DLT 80" # must be same as Device in Storage daemon
-# Media Type = DLT8000 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of DDS tape storage device
-#Storage {
-# Name = SDT-10000
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = SDT-10000 # must be same as Device in Storage daemon
-# Media Type = DDS-4 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of 8mm tape storage device
-#Storage {
-# Name = "8mmDrive"
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-# Device = "Exabyte 8mm"
-# MediaType = "8mm"
-#}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-Messages {
- Name = NoEmail
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- console = all, !skipped, !terminate
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-#
-# Message delivery for daemon messages (no job).
-Messages {
- Name = Daemon
- mailcommand = "@sbindir@/bsmtp -h @smtp_host@ -f \"\(Bacula\) %r\" -s \"Bacula daemon message\" %r"
- mail = @job_email@ = all, !skipped
- console = all, !skipped, !saved
- append = "@working_dir@/log" = all, !skipped
-}
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
+++ /dev/null
-#
-# Default Bacula File Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# There is not much to change here except perhaps the
-# File daemon Name to
-#
-
-#
-# List Directors who are permitted to contact this File daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc"
-}
-
-#
-# "Global" File daemon configuration specifications
-#
-FileDaemon { # this is me
- Name = @hostname@-fd
- FDport = 8102 # where we listen for the director
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- SubSys Directory = "@subsysdir@"
-}
-
-# Send all messages except skipped files back to Director
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-
-Device {
- Name = FileStorage
- Media Type = File
- Archive Device = @tmpdir@
- LabelMedia = yes; # lets Bacula label unlabelled media
- Random Access = Yes;
- AutomaticMount = yes; # when device opened, read it
- RemovableMedia = no;
- AlwaysOpen = no;
-# Maximum File Size = 10KB
-}
-
-Device {
- Name = FileStorage1
- Media Type = File1
- Archive Device = @tmpdir@
- LabelMedia = yes; # lets Bacula label unlabelled media
- Random Access = Yes;
- AutomaticMount = yes; # when device opened, read it
- RemovableMedia = no;
- AlwaysOpen = no;
-}
-
-
-#Device {
-# Name = "HP DLT 80"
-# Media Type = DLT8000
-# Archive Device = /dev/nst0
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = yes;
-# RemovableMedia = yes;
-#}
-
-#Device {
-# Name = SDT-7000 #
-# Media Type = DDS-2
-# Archive Device = /dev/nst0
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = yes;
-# RemovableMedia = yes;
-#}
-
-#Device {
-# Name = Floppy
-# Media Type = Floppy
-# Archive Device = /mnt/floppy
-# RemovableMedia = yes;
-# Random Access = Yes;
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = no;
-#}
-
-#
-# A very old Exabyte with no end of media detection
-#
-#Device {
-# Name = "Exabyte 8mm"
-# Media Type = "8mm"
-# Archive Device = /dev/nst0
-# Hardware end of medium = No;
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = Yes;
-# RemovableMedia = yes;
-#}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Bacula User Agent (or Console) Configuration File
-#
-
-Director {
- Name = @hostname@-dir
- DIRport = 8101
- address = @hostname@
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
-}
+++ /dev/null
-#
-# TestA Bacula Director Configuration file
-#
-# For Bacula release 1.30 (12 April 2003) -- redhat 7.3
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- SubSysDirectory = "@subsysdir@"
- Maximum Concurrent Jobs = 1
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3" # Console password
- Messages = Standard
-}
-
-
-Job {
- Name = "MultiVol"
- Type = Backup
- Client=@hostname@-fd
- Level = Full
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Write Bootstrap = "@working_dir@/SmallVols.bsr"
- Pool = SmallVols
- SpoolData = yes
-}
-
-
-Job {
- Name = "VerifyVolume"
- Type = Verify
- Level = VolumeToCatalog
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include { Options { signature=SHA1 }
- File =</tmp/file-list
- }
-}
-
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
-}
-
-# Definiton of file storage device
-Storage {
- Name = File
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage
- Media Type = File
-}
-
-Storage {
- Name = File1
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage1
- Media Type = File1
-}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all, !terminate
- operator = @job_email@ = mount
- console = all, !skipped, !terminate
-
- append = "@working_dir@/log" = all, !skipped
-}
-
-Messages {
- Name = NoEmail
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- console = all, !skipped, !terminate, !restored
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
-
-Pool {
- Name = SmallVols
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
- Maximum Volumes = 10
- MaximumVolumeBytes = 10M
- LabelFormat = Small
-}
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.39.23
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = localhost-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
- Messages = Daemon
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=Tibs
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-}
-
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=Tibs
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Enable VSS = yes
- Include { Options { signature=MD5; portable=no
- compression=GZIP }
-# File = "c:/cygwin" # big
- File = "c:/cygwin/home/kern/bacula/k"
- }
-}
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# Client (File Services) to backup
-Client {
- Name = Tibs
- Address = tibs
- FDPort = 9102
- Catalog = MyCatalog
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-Client {
- Name = localhost-fd
- Address = localhost
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc"
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-
-# Definition of DDS tape storage device
-Storage {
- Name = DDS-4
- Address = 192.168.68.112 # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
- Device = DDS-4 # must be same as Device in Storage daemon
- Media Type = DDS-4 # must be same as MediaType in Storage daemon
- AutoChanger = yes
- Maximum Concurrent Jobs = 4
-}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@sbindir@/bsmtp -h localhost -f \"\(Bacula Regression\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all, !terminate
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-#
-# Message delivery for daemon messages (no job).
-Messages {
- Name = Daemon
- mailcommand = "@sbindir@/bsmtp -h @smtp_host@ -f \"\(Bacula\) %r\" -s \"Bacula daemon message\" %r"
- mail = @job_email@ = all, !skipped
- console = all, !skipped, !saved
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
+++ /dev/null
-#
-# Default Bacula File Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# There is not much to change here except perhaps the
-# File daemon Name to
-#
-
-#
-# List Directors who are permitted to contact this File daemon
-#
-Director {
- Name = rufus-dir
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc"
-}
-
-#
-# "Global" File daemon configuration specifications
-#
-FileDaemon { # this is me
- Name = localhost-fd
- FDport = 8102 # where we listen for the director
- WorkingDirectory = "/home/kern/bacula/regress/working"
- Pid Directory = "/home/kern/bacula/regress/working"
- SubSys Directory = "/home/kern/bacula/regress/working"
-}
-
-# Send all messages except skipped files back to Director
-Messages {
- Name = Standard
- director = rufus-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.39.23
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = localhost-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "/home/kern/bacula/regress/working"
- Pid Directory = "/home/kern/bacula/regress/working"
- Subsys Directory = "/home/kern/bacula/regress/working"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = localhost-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-
-Device {
- Name = DDS-4 #
- Media Type = DDS-4
- Archive Device = /dev/nst0
- AutomaticMount = yes; # when device opened, read it
- AlwaysOpen = yes;
- RemovableMedia = yes;
- @/home/kern/bacula/regress/bin/tape_options
-# Maximum File Size = 1000000
-# MaximumVolumeSize = 100M
-}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = rufus-dir = all, !terminate
-}
+++ /dev/null
-#!/usr/bin/python
-from time import time as now
-
-fn = open('time.out', 'w+')
-fn.write('%s' % now())
-fn.close()
+++ /dev/null
-#!/bin/sh
-./all-non-root-tape-tests
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do an Incremental and restore those two files.
-#
-# This script uses the virtual disk autochanger and two drives
-#
-. config.out
-TestName="2drive-incremental-2disk"
-JobName="2drive2disk"
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-
-scripts/cleanup
-scripts/copy-2disk-drive-confs
-scripts/prepare-two-disks
-
-change_jobname localhost-fd $JobName
-start_test
-
-echo "${cwd}/tmp/build" >/tmp/file-list
-if test ! -d ${cwd}/tmp/build ; then
- mkdir ${cwd}/tmp/build
-fi
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-# Turn off Prefer Mounted Volumes so we use 2 drives
-outf="tmp/sed_tmp"
-echo "s%# Prefer Mounted Volumes% Prefer Mounted Volumes%g" >${outf}
-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1
-# Comment the next line out to write everything to one drive
-# otherwise, it writes the two jobs to different drives
-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 Pool=Default drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 Pool=Default drive=1
-status storage=DDS-4
-@#setdebug level=120 storage=DDS-4
-run job=NightlySave yes
-run job=NightlySave yes
-run job=NightlySave yes
-run job=NightlySave yes
-run job=NightlySave yes
-@sleep 3
-status storage=DDS-4
-wait
-list volumes
-list jobs
-status storage=DDS-4
-messages
-quit
-END_OF_DATA
-
-run_bacula
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-@# Force Incremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-status storage=DDS-4
-@#setdebug level=120 storage=DDS-4
-run level=Incremental job=NightlySave yes
-wait
-list volumes
-status storage=DDS-4
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-# The restore should read from TestVolume002, which was on drive 1
-grep tmp/log2.out TestVolume002
-if [ $? != 0 ] ; then
- rstat=$?
-fi
-
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-check_restore_tmp_build_diff
-
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do an Incremental and restore those two files.
-#
-# This script uses the autochanger and two tapes
-#
-. config.out
-if test x${TAPE_DRIVE1} = x/dev/null ; then
- echo "Skipping 2drive-incremenatal-2tape test. No second drive."
- exit
-fi
-TestName="2drive-incremental-2tape"
-JobName="2drive2tape"
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-
-scripts/copy-2drive-confs
-scripts/cleanup-2drive
-
-change_jobname localhost-fd $JobName
-
-echo "${cwd}/tmp/build" >/tmp/file-list
-if test ! -d ${cwd}/tmp/build ; then
- mkdir ${cwd}/tmp/build
-fi
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-# Turn off Prefer Mounted Volumes so we use 2 drives
-outf="tmp/sed_tmp"
-echo "s%# Prefer Mounted Volumes% Prefer Mounted Volumes%g" >${outf}
-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1
-# Comment the next line out to write everything to one drive
-# otherwise, it writes the two jobs to different drives
-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf
-
-start_test
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 Pool=Default drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 Pool=Default drive=1
-@#setdebug level=100 storage=DDS-4
-run job=NightlySave yes
-run job=NightlySave yes
-run job=NightlySave yes
-run job=NightlySave yes
-run job=NightlySave yes
-@sleep 3
-status storage=DDS-4
-wait
-list volumes
-list jobs
-status storage=DDS-4
-messages
-quit
-END_OF_DATA
-
-run_bacula
-
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-@# Force Incremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-status storage=DDS-4
-@#setdebug level=400 storage=DDS-4
-run level=Incremental job=NightlySave yes
-wait
-list volumes
-status storage=DDS-4
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-check_restore_tmp_build_diff
-
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Test if Bacula can automatically create a Volume label.
-#
-
-TestName="auto-label-test"
-JobName=AutoLabel
-. scripts/functions
-set_debug 0
-copy_test_confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1
-sed "s%# Label Format% Label Format%" ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf
-
-change_jobname CompressedTest $JobName
-start_test
-
-cat <<END_OF_SCRIPT >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-status all
-status all
-list pools
-messages
-@#setdebug level=110 storage=File
-run job=$JobName storage=File yes
-list pools
-list volumes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-count
-ls *
-dir *
-find Makefile
-pwd
-lsmark
-estimate
-?
-help
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_SCRIPT
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape then restore it, we do that twice to ensure that
-# we can correctly append to a tape.
-# We also use the purge and the relabel commands as
-# well as a pile of status storage commands.
-#
-TestName="backup-bacula-tape"
-JobName=backuptape
-. scripts/functions
-set_debug 0
-
-scripts/copy-tape-confs
-scripts/cleanup-tape
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-@#setdebug level=200 storage=DDS-4
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-purge volume=TestVolume001
-relabel pool=Default storage=DDS-4 oldVolume=TestVolume001 volume=TestVolume002 slot=0
-purge volume=TestVolume002
-relabel pool=Default storage=DDS-4 oldVolume=TestVolume002 volume=TestVolume001 slot=0
-run job=$JobName yes
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-@sleep 1
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-@sleep 1
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-@sleep 1
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-@sleep 1
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-list volumes
-messages
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-#
-# Now do a second backup after making a few changes
-#
-touch ${cwd}/build/src/dird/*.c
-echo "test test" > ${cwd}/build/src/dird/xxx
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-list volumes
-run job=$JobName yes
-wait
-list volumes
-messages
-@#
-@# now do a second restore
-@#
-@$out tmp/log2.out
-list volumes
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-list volumes
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-TestName="backup-bacula-test"
-JobName=backup
-. scripts/functions
-set_debug 0
-
-scripts/cleanup
-scripts/copy-confs
-
-change_jobname Client1 $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label volume=TestVolume001
-@#setdebug level=100 storage=File
-run job=$JobName yes
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-@sleep 1
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-@sleep 1
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape then restore it, we do that twice to ensure that
-# we can correctly append to a tape.
-#
-TestName="backup-win32-tape"
-JobName=backupwintape
-. scripts/functions
-set_debug 0
-
-scripts/cleanup-tape
-scripts/copy-win32-confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname $JobName
-start_test
-
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=NightlySave yes
-@sleep 10
-status storage=DDS-4
-@sleep 30
-messages
-wait
-messages
-@#
-@# now do a restore
-@#
-@$outt tmp/log2.out
-@#restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-@#yes
-@#wait
-@#messages
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory but
-# split the archive into two volumes, then build a BSR with
-# the restore command and use bextract to restore the files.
-#
-TestName="bextract-test"
-JobName="bextract"
-. scripts/functions
-set_debug 0
-
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=File1 volume=TestVolume001
-label storage=File1 volume=TestVolume002
-update Volume=TestVolume001 MaxVolBytes=3000000
-@#setdebug level=400 dir
-@#setdebug level=400 storage=File1
-run job=$JobName storage=File1 yes
-wait
-messages
-@#
-@# now build the bsr file
-@#
-@$out tmp/log2.out
-restore bootstrap=${cwd}/working/restore.bsr where=${cwd}/tmp/bacula-restores select all storage=File1 done
-no
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File1
-stop_bacula
-
-mkdir -p ${cwd}/tmp/bacula-restores
-bin/bextract -b working/restore.bsr -c bin/bacula-sd.conf ${cwd}/tmp ${cwd}/tmp/bacula-restores 2>&1 >/dev/null
-rstat=$?
-grep "^ Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup four times, each with incremental then
-# do a bscan and restore.
-# It should require at least 4 different bsrs.
-#
-TestName="bscan-tape"
-JobName=bscantape
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-# sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-setdebug level=2 storage=DDS-4
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-echo "Starting Bacula tape writing"
-#bin/btape -c bin/bacula-sd.conf /dev/nst0 <<END_OF_DATA
-#rewind
-#label
-#Test001
-#wr
-#wr
-#wr
-#wr
-#wr
-#wr
-#weof
-#quit
-#END_OF_DATA
-#run_bacula
-#check_for_zombie_jobs storage=DDS-4
-#stop_bacula
-echo "End writing tape"
-
-#
-# now drop and recreate the database
-#
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges 2>&1 >/dev/null
-cd ..
-
-echo "Begin attempt to read tape that crashes the system"
-echo "volume=TestVolume001" >tmp/bscan.bsr
-strace -o strace.new bin/bscan -d200 -w working -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf DDS-4
-exit
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log2.out
-@#
-@# now do a restore
-@#
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-rm -f ${cwd}/build/src/lib/dummy
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup four times, each with incremental then
-# do a bscan and restore.
-# It should require at least 4 different bsrs.
-#
-TestName="bscan-tape"
-JobName=bscantape
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-estimate job=$JobName listing
-estimate job=$JobName listing
-estimate job=$JobName listing
-messages
-@$out tmp/log1.out
-setdebug level=2 storage=DDS-4
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName yes
-wait
-run job=$JobName level=Full yes
-wait
-run job=$JobName level=Full yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-
-echo "Backup 1 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/dird/*.c ${cwd}/build/src/dird/*.o
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-
-#
-# run a second job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-scripts/check_for_zombie_jobs storage=DDS-4
-
-echo "Backup 2 done"
-touch ${cwd}/build/src/dird/*.c
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#
-# run a third job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-scripts/check_for_zombie_jobs storage=DDS-4
-
-echo "Backup 3 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#echo "abc" > ${cwd}/build/src/lib/dummy
-#
-# run a fourth job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-
-scripts/check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-echo "Backup 4 done"
-#
-# now drop and recreate the database
-#
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges 2>&1 >/dev/null
-cd ..
-
-echo "volume=TestVolume001" >tmp/bscan.bsr
-bin/bscan -w working -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf DDS-4 2>&1 >/dev/null
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log2.out
-@#
-@# now do a restore
-@#
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-rm -f ${cwd}/build/src/lib/dummy
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory but
-# split the archive into two volumes then bscan it
-# into the catalog after the backup. It also to a limited
-# extent tests the purge volume and delete volume commands.
-#
-
-TestName="bscan-test"
-JobName=bscan
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File1
-TestVolume001
-label storage=File1
-TestVolume002
-update Volume=TestVolume001 MaxVolBytes=3000000
-run job=$JobName storage=File1
-yes
-wait
-messages
-@$out /dev/null
-@#
-@# now purge the Volume
-@#
-purge volume=TestVolume001
-purge volume=TestVolume002
-delete volume=TestVolume001
-yes
-delete volume=TestVolume002
-yes
-messages
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File1
-stop_bacula
-
-echo "volume=TestVolume001|TestVolume002" >tmp/bscan.bsr
-
-if test "$debug" -eq 1 ; then
- bin/bscan -w working -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf ${cwd}/tmp
-else
- bin/bscan -w working -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf ${cwd}/tmp 2>&1 >/dev/null
-fi
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log2.out
-@#
-@# now do a restore
-@#
-@#setdebug level=400 storage=File1
-restore bootstrap=${cwd}/tmp/kern.bsr where=${cwd}/tmp/bacula-restores select all storage=File1 done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-# now run restore
-run_bacula
-check_for_zombie_jobs storage=File1
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory but
-# split the archive into two volumes, then restore
-# files on only one of the volumes and ensure that
-# the other volume is not used. I.e. bsr optimization
-# works.
-#
-TestName="bsr-opt-test"
-JobName=bsr-opt
-. scripts/functions
-set_debug 0
-
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File1 volume=TestVolume001
-label storage=File1 volume=TestVolume002
-update Volume=TestVolume001 MaxVolBytes=3000000
-run job=$JobName storage=File1 yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore bootstrap=${cwd}/working/restore.bsr where=${cwd}/tmp/bacula-restores select storage=File1
-unmark *
-cd ${cwd}/build/src/cats
-mark *
-ls
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File1
-stop_bacula
-#
-# This test is not really reliable. What we want to do is
-# to select files on only one Volume, then insure here
-# that only one Volume is chosen.
-#
-grep TestVolume002 working/restore.bsr 2>&1 >/dev/null
-bsrstat=$?
-check_two_logs
-
-diff -r build/src/cats tmp/bacula-restores${cwd}/build/src/cats 2>&1 >/dev/null
-if [ $? != 0 -o $bsrstat != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! bsr-opt-test Bacula source failed!!! !!!!! "
- echo " !!!!! bsr-opt-test failed!!! !!!!! " >>test.out
- if [ $bstat != 0 -o $rstat != 0 ] ; then
- echo " !!!!! Bad Job termination status !!!!! "
- echo " !!!!! Bad Job termination status !!!!! " >>test.out
- elif [ $bsrstat != 0 ] ; then
- echo " !!!!! Volume selection error !!!!! "
- echo " !!!!! Volume selection error !!!!! " >>test.out
- else
- echo " !!!!! Restored files differ !!!!! "
- echo " !!!!! Restored files differ !!!!! " >>test.out
- fi
- echo " "
-else
- echo " ===== bsr-opt-test Bacula source OK `date +%R:%S` ===== "
- echo " ===== bsr-opt-test OK `date +%R:%S` ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Test the fill command in btape
-#
-TestName="btape-fill-full-tape"
-JobName=AutoLabel
-. scripts/functions
-set_debug 0
-
-scripts/copy-tape-confs
-scripts/cleanup-tape
-
-change_jobname $JobName
-start_test
-
-bin/btape -c bin/bacula-sd.conf DDS-4 <<END_OF_DATA 2>&1 >tmp/log1.out
-fill
-s
-
-quit
-END_OF_DATA
-
-
-grep "^The last block on the tape matches\. Test succeeded\." tmp/log1.out 2>&1 >/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! btape fill test failed!!! !!!!! "
- echo " !!!!! btape fill test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== btape fill test OK ===== "
- echo " ===== btape fill test OK ===== " >>test.out
-# scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Test the fill command in btape
-#
-TestName="btape-fill-tape"
-JobName=filltape
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# MaximumVolumeSize% MaximumVolumeSize%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-fill
-s
-quit
-END_OF_DATA
-
-run_btape DDS-4
-
-grep "^The last block on the tape matches\. Test succeeded\." tmp/log1.out 2>&1 >/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! btape fill test failed!!! !!!!! "
- echo " !!!!! btape fill test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== btape fill test OK ===== "
- echo " ===== btape fill test OK ===== " >>test.out
-# scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup with encryption and compression of the Bacula build directory
-# then verify the signatures.
-#
-TestName="compressed-encrypt-test"
-JobName=CompressedTest
-. scripts/functions
-set_debug 0
-
-scripts/cleanup
-scripts/copy-crypto-confs
-echo "${cwd}/build" >/tmp/file-list
-
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-setdebug level=10 fd
-run job=$JobName yes
-wait
-messages
-list volumes
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-@# setdebug level=0 fd
-restore where=${cwd}/tmp/bacula-restores storage=File
-5
-mark *
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-sleep 2
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then restore it.
-#
-TestName="compressed-test"
-JobName=compressed
-. scripts/functions
-set_debug 0
-
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname CompressedTest $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output
-messages
-@$out tmp/log1.out
-status all
-status all
-messages
-label storage=File volume=TestVolume001
-run job=$JobName storage=File yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run two jobs at the same time
-#
-
-TestName="concurrent-jobs-test"
-JobName=concurrent-jobs
-. scripts/functions
-set_debug 0
-
-copy_test_confs
-
-echo "${cwd}/tmp/largefile" >/tmp/file-list
-if test -c /dev/urandom ; then
-# Create 56MB file with random data
- echo "Creating a 56MB file with random data ..."
- dd if=/dev/urandom of=${cwd}/tmp/largefile bs=1024 count=55000
-else
- echo "Creating a 56MB file with bacula-dir data ..."
- dd if=bin/bacula-dir of=${cwd}/tmp/1 bs=1024 count=1000
- cat ${cwd}/tmp/1 ${cwd}/tmp/1 ${cwd}/tmp/1 ${cwd}/tmp/1 ${cwd}/tmp/1 >${cwd}/tmp/2
- rm -f ${cwd}/tmp/1
- cat ${cwd}/tmp/2 ${cwd}/tmp/2 ${cwd}/tmp/2 ${cwd}/tmp/2 ${cwd}/tmp/2 >>${cwd}/tmp/3
- rm -f ${cwd}/tmp/2
- cat ${cwd}/tmp/3 ${cwd}/tmp/3 ${cwd}/tmp/3 ${cwd}/tmp/3 ${cwd}/tmp/3 >${cwd}/tmp/largefile
- rm -f ${cwd}/tmp/3
-fi
-
-echo "largefile created"
-
-change_jobname CompressedTest $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-run job=$JobName level=Full yes
-run job=$JobName level=Full yes
-run job=$JobName level=Full yes
-run job=$JobName level=Full yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-diff tmp/largefile tmp/bacula-restores${cwd}/tmp/largefile 2>&1 >/dev/null
-dstat=$?
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup with encryption and no other options
-# (i.e. no compression and no sparse handling) of the
-# Bacula build directory.
-#
-TestName="data-encrypt-test"
-JobName=Crypto
-. scripts/functions
-set_debug 0
-
-scripts/cleanup
-scripts/copy-crypto-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-@#setdebug level=10 fd
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-@#setdebug level=10 fd
-restore where=${cwd}/tmp/bacula-restores storage=File
-5
-mark *
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-sleep 2
-check_for_zombie_jobs storage=File
-stop_bacula
-
-du -s build
-du -s tmp/bacula-restores/
-
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-MUID=`/usr/bin/id -u`
-if [ $MUID != 0 ] ; then
- echo " "
- echo "You must be root to run this test."
- echo " ===== !!!! dev-test-root not run !!!! ===== "
- echo " ===== !!!! dev-test-root not run !!!! ===== " >>test.out
- echo " "
- exit 1
-fi
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "/dev" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting dev-test-root test ==="
-echo " "
-echo " === Note, this test can fail for trivial ==="
-echo " === reasons on non-Linux systems. ==="
-echo " "
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test dev >${cwd}/tmp/original
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test dev >${cwd}/tmp/restored
-cd ${cwd}/tmp
-#
-# Use sed to cut out parts that *always* change
-#
-cat >sed.scr <<END_OF_DATA
-s%.*dev$%dev%
-s%.*[0-9][0-9]:[0-9][0-9]:[0-9][0-9] dev/ptmx%dev/ptmx%
-s%.*[0-9][0-9]:[0-9][0-9]:[0-9][0-9] dev/ttyp1%dev/ttyp1%
-s%.*[0-9][0-9]:[0-9][0-9]:[0-9][0-9] dev/null%dev/null%
-END_OF_DATA
-
-# strip file system change messages then sed and sort
-grep -v "Skip: File system change prohibited." original >1
-sed -f sed.scr 1 | sort >original
-#
-mv -f restored 1
-sed -f sed.scr 1 | sort >restored
-rm -f sed.scr
-#
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== !!!! dev-test-root failed !!!! ===== "
- echo " ===== !!!! dev-test-root failed !!!! ===== " >>test.out
- echo " "
-else
- echo " ===== dev-test-root OK ===== "
- echo " ===== dev-test-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do a differential and restore those two files.
-#
-TestName="differential-test"
-JobName=differential
-. scripts/functions
-set_debug 0
-
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/tmp/build" >/tmp/file-list
-mkdir ${cwd}/tmp/build
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-change_jobname CompressedTest $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume002
-label storage=File volume=TestVolume001
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-
-scripts/check_for_zombie_jobs storage=File
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-@# Force differential on the second Volume
-update volume=TestVolume002 VolStatus=Used
-run level=differential job=$JobName yes
-wait
-messages
-@$out
-END_OF_DATA
-
-run_bconsole
-
-scripts/check_for_zombie_jobs storage=File
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-run level=incremental job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=File file=<${cwd}/tmp/restore-list
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bconsole
-scripts/check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-#
-# Delete .c files because we will only restore the txt files
-#
-rm -f tmp/build/*.c
-check_restore_tmp_build_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to two tapes where the maximum tape file size is set to 1M
-#
-TestName="eot-fail-tape"
-JobName=eotfailtape
-. scripts/functions
-set_debug 0
-
-scripts/cleanup-tape
-scripts/copy-tape-confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-out="tmp/sed_tmp"
-echo "s%# Maximum File Size% Maximum File Size%g" >${out}
-cp -f ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed -f ${out} ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-update Volume=TestVolume001 MaxVolBytes=3000000
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@tee
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-MUID=`/usr/bin/id -u`
-if [ $MUID != 0 ] ; then
- echo " "
- echo "You must be root to run this test."
- echo " ===== !!!! etc-test-root not run !!!! ===== "
- echo " ===== !!!! etc-test-root not run !!!! ===== " >>test.out
- echo " "
- exit 1
-fi
-echo " "
-echo " "
-echo " === Starting /etc save/restore test ==="
-echo " "
-echo " "
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "/etc" >/tmp/file-list
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File
-TestVolume001
-run job=NightlySave
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test etc >${cwd}/tmp/1
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test etc >${cwd}/tmp/2
-sort <${cwd}/tmp/1 >${cwd}/tmp/original
-sort <${cwd}/tmp/2 >${cwd}/tmp/restored
-rm -f ${cwd}/tmp/1 ${cwd}/tmp/2
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== !!!! etc-test-root failed !!!! ===== "
- echo " ===== !!!! etc-test-root failed !!!! ===== " >>test.out
- echo " "
-else
- echo " ===== etc-test-root OK ===== "
- echo " ===== etc-test-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape where we set the minimum and maximum block
-# sizes.
-#
-TestName="fixed-block-size-tape"
-JobName=fixedblocksize
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-echo "s%# Maximum Block Size% Maximum Block Size%" >${cwd}/tmp/2
-echo "s%# Minimum Block Size% Minimum Block Size%" >>${cwd}/tmp/2
-sed -f ${cwd}/tmp/2 ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo "!!!! sed problem in Fixed Block Size test !!!!!"
- echo " "
- exit 1
-fi
-rm -f ${cwd}/tmp/1 ${cwd}/tmp/2
-
-change_jobname NightlySave $JobName
-start_test
-
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DDS-4
-unmark *
-mark *
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run four jobs at the same time
-#
-TestName="four-concurrent-jobs-tape"
-JobName=FourConcurrentJobs
-. scripts/functions
-set_debug 0
-
-scripts/cleanup-tape
-scripts/copy-tape-confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName level=Full Storage=DDS-4 yes
-run job=$JobName level=Full Storage=DDS-4 yes
-run job=$JobName level=Full Storage=DDS-4 yes
-run job=$JobName level=Full Storage=DDS-4 yes
-@sleep 2
-status dir
-@sleep 5
-status dir
-status storage=DDS-4
-messages
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DDS-4
-unmark *
-mark *
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run two jobs at the same time
-#
-TestName="four-concurrent-jobs-test"
-JobName=Four-concurrent-jobs
-. scripts/functions
-set_debug 0
-
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=File1
-TestVolume001
-label storage=File1
-TestVolume002
-update Volume=TestVolume001 MaxVolBytes=100000000
-@#50000000
-@#12
-run job=$JobName level=Full Storage=File1
-yes
-reload
-run job=$JobName level=Full Storage=File1
-yes
-reload
-run job=$JobName level=Full Storage=File1
-yes
-reload
-run job=$JobName level=Full Storage=File1
-yes
-reload
-reload
-reload
-reload
-@sleep 2
-status dir
-reload
-@sleep 5
-messages
-reload
-reload
-wait
-reload
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File1
-unmark *
-mark *
-done
-yes
-wait
-reload
-reload
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File1
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup four times, each with incremental then finally restore.
-# It should require at least 4 different bsrs.
-#
-TestName="four-jobs-tape"
-JobName=fourjobstape
-. scripts/functions
-set_debug 0
-
-scripts/cleanup-tape
-scripts/copy-tape-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-estimate job=$JobName listing
-estimate job=$JobName listing
-estimate job=$JobName listing
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-if test "$debug" -eq 1 ; then
- bin/bacula start
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
-else
- bin/bacula start 2>&1 >/dev/null
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
-fi
-
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 1 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/dird/*.c ${cwd}/build/src/dird/*.o
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-
-#
-# run a second job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-if test "$debug" -eq 1 ; then
- bin/bacula start
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
-else
- bin/bacula start 2>&1 >/dev/null
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
-fi
-
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 2 done"
-touch ${cwd}/build/src/dird/*.c
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#
-# run a third job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-if test "$debug" -eq 1 ; then
- bin/bacula start
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
-else
- bin/bacula start 2>&1 >/dev/null
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
-fi
-
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 3 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#
-# run a fourth job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-if test "$debug" -eq 1 ; then
- bin/bacula start
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
-else
- bin/bacula start 2>&1 >/dev/null
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
-fi
-
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 4 done"
-#
-# now do several restores to ensure we cleanup between jobs
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-@$out tmp/log2.out
-@#
-@# now unmount the tape and start two restores
-@# at the same time
-@#
-unmount storage=DDS-4
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-restore where=${cwd}/tmp/bacula-restores select
-unmark *
-mark *
-done
-yes
-mount storage=DDS-4
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup four times, each with incremental then finally restore.
-# It should require at least 4 different bsrs.
-#
-TestName="four-jobs-test"
-JobName=SpanVol
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname CompressedTest $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-estimate job=$JobName listing
-estimate job=$JobName listing
-estimate job=$JobName listing
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-echo "Backup 1 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/dird/*.c ${cwd}/build/src/dird/*.o
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-
-#
-# run a second job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName
-yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=File
-
-echo "Backup 2 done"
-touch ${cwd}/build/src/dird/*.c
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#
-# run a third job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=File
-
-echo "Backup 3 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#
-# run a fourth job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=File
-
-echo "Backup 4 done"
-#
-# now do several restores to ensure we cleanup between jobs
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-restore where=${cwd}/tmp/bacula-restores select all storage=File done
-yes
-wait
-restore where=${cwd}/tmp/bacula-restores select all storage=File done
-yes
-wait
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the Sparse option
-# then restore it.
-#
-TestName="gigaslam-sparse-test"
-JobName=SparseTest
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-cd ${cwd}/build/src/tools
-./gigaslam
-if [ $? != 0 ]; then
- echo "Execute of ${cwd}/build/src/tools/gigaslam failed."
- rm -f ${cwd}/build/src/tools/gigaslam.gif
- exit 1
-fi
-cd ${cwd}
-
-start_test
-
-cat >tmp/bconcmds <<END_OF_DATA
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-run job=$JobName yes
-wait
-messages
-list volumes
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-size=`du ${cwd}/tmp/bacula-restores/${cwd}/build/src/tools/gigaslam.gif | cut -f 1`
-if [ $size -gt 120 ]; then
- echo "========== restored sparse file gigaslam.gif too big ========="
- echo " size is ${size}K it should be 120K"
-fi
-
-check_two_logs
-check_restore_diff
-end_test
-rm -f ${cwd}/build/src/tools/gigaslam.gif
-rm -f ${cwd}/build/gigaslam.gif
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-TestName="hardlink-test"
-JobName=hardlink
-. scripts/functions
-set_debug 0
-
-if test ! -d weird-files ; then
- echo " "
- echo "Weird files not configured. Test not run."
- exit 0
-fi
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-change_jobname NightlySave $JobName
-#
-# Note, we save the weird-files directory twice on purpose
-# because this causes problems with hard linked files
-# that are only saved once. In 1.33, Bacula now deals
-# with this situation.
-#
-echo "${cwd}/weird-files" >/tmp/file-list
-echo "${cwd}/weird-files" >>/tmp/file-list
-
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File
-TestVolume001
-run job=$JobName
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=File
-5
-cd ${cwd}/weird-files/subdir
-mark another-hardlink
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-diff ${cwd}/weird-files/subdir/another-hardlink \
- ${cwd}/tmp/bacula-restores/${cwd}/weird-files/subdir/another-hardlink 2>&1 >/dev/null
-dstat=$?
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do an Incremental and restore those two files.
-#
-# This script uses the virtual disk autochanger
-#
-TestName="incremental-2disk"
-JobName=Inc2disk
-. scripts/functions
-set_debug 0
-
-. config.out
-
-stop_bacula
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges 2>&1 >/dev/null
-cd ..
-
-scripts/copy-2disk-confs
-scripts/prepare-two-disks
-
-echo "${cwd}/tmp/build" >/tmp/file-list
-if test ! -d ${cwd}/tmp/build ; then
- mkdir ${cwd}/tmp/build
-fi
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-change_jobname $JobName
-start_test
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 Pool=Default drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 Pool=Default drive=0
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-@# Force Incremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-run level=Incremental job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bconsole
-
-check_for_zombie_jobs storage=File
-stop_bacula
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-
-check_two_logs
-check_restore_tmp_build_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do an Incremental and restore those two files.
-#
-# This script uses the autochanger and two tapes
-#
-. config.out
-if test x${AUTOCHANGER} = x/dev/null ; then
- echo "incremental-2tape test skipped. No autochanger."
- exit
-fi
-debug=0
-if test "$debug" -eq 1 ; then
- out="tee"
-else
- out="output"
-fi
-cwd=`pwd`
-bin/bacula stop 2>&1 >/dev/null
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges 2>&1 >/dev/null
-cd ..
-
-scripts/copy-2tape-confs
-scripts/cleanup-2tape
-echo "${cwd}/tmp/build" >/tmp/file-list
-if test ! -d ${cwd}/tmp/build ; then
- mkdir ${cwd}/tmp/build
-fi
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-echo " "
-echo " "
-echo " === Starting incremental-2tape test ==="
-echo " === Starting incremental-2tape test ===" >>working/log
-echo " "
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 Pool=Default drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 Pool=Default drive=0
-run job=NightlySave yes
-wait
-messages
-quit
-END_OF_DATA
-
-if test "$debug" -eq 1 ; then
- bin/bacula start
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
-else
- bin/bacula start 2>&1 >/dev/null
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
-fi
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@$out /dev/null
-messages
-@$out tmp/log1.out
-@# Force Incremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-run level=Incremental job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-grep "^ Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^ Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
-rstat=$?
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-diff -r tmp/build tmp/bacula-restores${cwd}/tmp/build 2>&1 >/dev/null
-if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! incremental-2tape test Bacula source failed!!! !!!!! "
- echo " !!!!! incremental-2tape test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== incremental-2tape test Bacula source OK ===== "
- echo " ===== incremental-2tape test OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do an Incremental and restore those two files.
-#
-TestName="incremental-tape"
-JobName=IncTape
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-
-echo "${cwd}/tmp/build" >/tmp/file-list
-if test ! -d ${cwd}/tmp/build ; then
- mkdir ${cwd}/tmp/build
-fi
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-run level=Incremental job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=DDS-4
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-
-check_two_logs
-check_restore_tmp_build_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do an Incremental and restore those two files.
-#
-TestName="incremental-test"
-JobName=Incremental
-. scripts/functions
-set_debug 0
-
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/tmp/build" >/tmp/file-list
-mkdir ${cwd}/tmp/build
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-change_jobname CompressedTest $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-label storage=File volume=TestVolume002
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-#
-# Now create two new files to be restored later
-#
-sleep 1
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-cp -f ${cwd}/tmp/build/dird.c ${cwd}/tmp/build/ficheriro2.txt
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-@# Force Incremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-run level=Differential job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bconsole
-
-sleep 1
-touch ${cwd}/tmp/build/ficheriro1.txt
-touch ${cwd}/tmp/build/ficheriro2.txt
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-run level=Incremental job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bconsole
-
-sleep 1
-cd ${cwd}/tmp/build
-cp -f ficheriro2.txt 1
-sed "s%a%b%g" 1 >ficheriro2.txt
-rm -f 1
-cd ${cwd}
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-run level=Differential job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bconsole
-
-sleep 1
-touch ${cwd}/tmp/build/ficheriro1.txt
-touch ${cwd}/tmp/build/ficheriro2.txt
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-run level=Incremental job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bconsole
-
-sleep 1
-touch ${cwd}/tmp/build/ficheriro1.txt
-touch ${cwd}/tmp/build/ficheriro2.txt
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-run level=Incremental job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bconsole
-
-sleep 1
-touch ${cwd}/tmp/build/ficheriro1.txt
-touch ${cwd}/tmp/build/ficheriro2.txt
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-run level=Incremental job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bconsole
-sleep 1
-touch ${cwd}/tmp/build/ficheriro1.txt
-touch ${cwd}/tmp/build/ficheriro2.txt
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-run level=Incremental job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=File file=<${cwd}/tmp/restore-list
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-check_restore_tmp_build_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the /lib directory
-# then restore it.
-#
-cwd=`pwd`
-bin/bacula stop 2>&1 >/dev/null
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges 2>&1 >/dev/null
-cd ..
-
-scripts/cleanup-tape
-scripts/copy-tape-confs
-echo "/lib" >/tmp/file-list
-echo " "
-echo " "
-echo " === Starting lib-tape-root test ==="
-echo " "
-echo " "
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 Volume=TestVolume001 slot=0
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/original
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/restored
-cd ${cwd}/tmp
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% original >1
-sort <1 >original
-#
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% restored >1
-sort <1 >restored
-rm -f 1
-#
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/nul
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== lib-tape-root failed!!! ===== "
- echo " ===== lib-tape-root failed!!! ===== " >>test.out
- echo " "
-else
- echo " ===== lib-tape-root OK ===== "
- echo " ===== lib-tape-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-MUID=`/usr/bin/id -u`
-if [ $MUID != 0 ] ; then
- echo " "
- echo "You must be root to run this test."
- echo " ===== !!!! lib-test-root not run !!!! ===== "
- echo " ===== !!!! lib-test-root not run !!!! ===== " >>test.out
- echo " "
- exit 1
-fi
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "/lib" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting /lib save/restore test ==="
-echo " "
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File
-TestVolume001
-run job=NightlySave
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-lib-test lib >${cwd}/tmp/original
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-lib-test lib >${cwd}/tmp/restored
-cd ${cwd}/tmp
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% original >1
-sort <1 >original
-#
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% restored >1
-sort <1 >restored
-rm -f 1
-#
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/nul
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== !!!! lib-test-root failed !!!! ===== "
- echo " ===== !!!! lib-test-root failed !!!! ===== " >>test.out
- echo " "
-else
- echo " ===== lib-test-root OK ===== "
- echo " ===== lib-test-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then migrate it
-# to another device.
-#
-# This script uses the virtual disk autochanger
-#
-TestName="migration-job-test"
-JobName=MigrationJobSave
-. scripts/functions
-set_debug 0
-
-. config.out
-
-scripts/cleanup
-scripts/copy-migration-confs
-scripts/prepare-two-disks
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-#
-# Note, we first backup into Pool Default,
-# then Migrate into Pool Full.
-# Pool Default uses Storage=File
-# Pool Full uses Storage=DiskChanger
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@output
-messages
-@$out tmp/log1.out
-label storage=File volume=FileVolume001 Pool=Default
-label storage=DiskChanger volume=ChangerVolume001 slot=1 Pool=Full drive=0
-label storage=DiskChanger volume=ChangerVolume002 slot=2 Pool=Full drive=0
-@# run two jobs (both will be migrated)
-run job=$JobName yes
-run job=$JobName yes
-wait
-list jobs
-list volumes
-@#setdebug level=100 dir
-@# should migrate two jobs
-run job=migrate-job yes
-wait
-messages
-@# purge volume=FileVolume001
-list jobs
-list volumes
-wait
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DiskChanger
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then migrate it
-# to another device.
-#
-# Test migrating a job that spans two Volumes
-#
-# This script uses the virtual disk autochanger
-#
-TestName="migration-jobspan-test"
-JobName=MigrationJobSpanSave
-. scripts/functions
-set_debug 0
-
-. config.out
-
-scripts/cleanup
-scripts/copy-migration-confs
-scripts/prepare-two-disks
-echo "${cwd}/build" >/tmp/file-list
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-
-change_jobname NightlySave $JobName
-start_test
-
-#
-# Note, we first backup into Pool Default,
-# then Migrate into Pool Full.
-# Pool Default uses Storage=File
-# Pool Full uses Storage=DiskChanger
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@output
-messages
-@$out tmp/log1.out
-@#setdebug level=10 dir
-@#setdebug level=100 storage=File
-label storage=File volume=FileVolume001 Pool=Default
-label storage=File volume=FileVolume002 Pool=Default
-update Volume=FileVolume001 MaxVolBytes=3000000 pool=Default
-label storage=DiskChanger volume=ChangerVolume001 slot=1 Pool=Full drive=0
-label storage=DiskChanger volume=ChangerVolume002 slot=2 Pool=Full drive=0
-list volumes
-@#
-run job=$JobName yes
-@#run job=$JobName yes
-wait
-list volumes
-@#setdebug level=200 dir
-@# should migrate both Volumes
-run job=migrate-job yes
-wait
-purge volume=FileVolume001
-purge volume=FileVolume002
-list volumes
-list jobs
-messages
-wait
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DiskChanger
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then migrate it
-# to another device.
-#
-# This script uses the virtual disk autochanger
-#
-TestName="migration-occupancy-test"
-JobName=MigrationJobSave
-. scripts/functions
-set_debug 0
-
-. config.out
-
-scripts/cleanup
-scripts/copy-migration-confs
-scripts/prepare-two-disks
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-#
-# Note, we first backup into Pool Default,
-# then Migrate into Pool Full.
-# Pool Default uses Storage=File
-# Pool Full uses Storage=DiskChanger
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@output
-messages
-@$out tmp/log1.out
-label storage=File volume=FileVolume001 Pool=Default
-label storage=DiskChanger volume=ChangerVolume001 slot=1 Pool=Full drive=0
-label storage=DiskChanger volume=ChangerVolume002 slot=2 Pool=Full drive=0
-list volumes
-@# run two jobs (both will be migrated)
-run job=$JobName yes
-run job=$JobName yes
-wait
-update volume=FileVolume001 VolStatus=Used
-list volumes
-@# should migrate two jobs
-run job=migrate-occupancy yes
-list volumes
-wait
-messages
-purge volume=FileVolume001
-wait
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DiskChanger
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then migrate it
-# to another device.
-#
-# This script uses the virtual disk autochanger
-#
-TestName="migration-time-test"
-JobName=MigrationJobSave
-. scripts/functions
-set_debug 0
-
-. config.out
-
-scripts/cleanup
-scripts/copy-migration-confs
-scripts/prepare-two-disks
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-#
-# Note, we first backup into Pool Default,
-# then Migrate into Pool Full.
-# Pool Default uses Storage=File
-# Pool Full uses Storage=DiskChanger
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@output
-messages
-@$out tmp/log1.out
-label storage=File volume=FileVolume001 Pool=Default
-label storage=DiskChanger volume=ChangerVolume001 slot=1 Pool=Full drive=0
-label storage=DiskChanger volume=ChangerVolume002 slot=2 Pool=Full drive=0
-list volumes
-@# run three jobs
-run job=$JobName level=Full yes
-run job=$JobName level=Full yes
-run job=$JobName level=Full yes
-wait
-update volume=FileVolume001 VolStatus=Used
-sql
-update Job SET RealEndTime='2004-01-01 12:01:01' WHERE JobId IN (2,3);
-
-llist jobid=2,3
-list jobs
-list volumes
-@# should migrate only jobid=2 and 3
-run job=migrate-time yes
-wait
-messages
-wait
-purge volume=FileVolume001
-list jobs
-list volumes
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DiskChanger
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a backup of the Bacula build directory on two Volumes
-# then migrate it to another device.
-#
-# This script uses the virtual disk autochanger
-#
-TestName="migration-volume-test"
-JobName=MigVolBackup
-. scripts/functions
-set_debug 0
-
-. config.out
-
-scripts/cleanup
-scripts/copy-migration-confs
-scripts/prepare-two-disks
-echo "${cwd}/build" >/tmp/file-list
-#cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-#sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname NightlySave $JobName
-start_test
-
-#
-# Note, we first backup into Pool Default,
-# then Migrate into Pool Full.
-# Pool Default uses Storage=File
-# Pool Full uses Storage=DiskChanger
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@output
-messages
-@$out tmp/log1.out
-label storage=File volume=FileVolume001 Pool=Default
-label storage=File volume=FileVolume002 Pool=Default
-update Volume=FileVolume001 MaxVolBytes=3000000 pool=Default
-label storage=DiskChanger volume=ChangerVolume001 slot=1 Pool=Full drive=0
-label storage=DiskChanger volume=ChangerVolume002 slot=2 Pool=Full drive=0
-@#
-run job=$JobName yes
-wait
-run job=$JobName yes
-wait
-update volume=FileVolume001 VolStatus=Used
-update volume=FileVolume002 VolStatus=Used
-@#list volumes
-@#list jobs
-@# should migrate two jobs
-@# setdebug level=11 dir
-@echo "Run migrate-volume Job"
-@#setdebug level=100 dir
-run job=migrate-volume yes
-@sleep 5
-list jobs
-llist jobid=1
-llist jobid=2
-llist jobid=3
-llist jobid=4
-llist jobid=5
-status storage=DiskChanger
-wait
-list volumes
-list jobs
-llist jobid=1
-llist jobid=2
-llist jobid=3
-llist jobid=4
-llist jobid=5
-sql
-select * from JobMedia where JobId=1;
-
-@# Now run a second Migration job, which should do nothing
-run job=migrate-volume yes
-wait
-list jobs
-@# ensure we don't pickup old backup by purging volume
-@# purge volume=FileVolume001
-@# purge volume=FileVolume002
-@echo "Now do a restore"
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DiskChanger
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-exit
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do a Differental then a bunch of query commands
-# and finally restore the two files.
-#
-TestName="query-test"
-JobName=query
-. scripts/functions
-set_debug 0
-
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/tmp/build" >/tmp/file-list
-mkdir ${cwd}/tmp/build
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-change_jobname CompressedTest $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-label storage=File volume=TestVolume002
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-@# Force differental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-run level=differental job=$JobName yes
-wait
-messages
-@output
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-run level=incremental job=$JobName yes
-wait
-messages
-@#
-@# Now do the queries
-@#
-query
-1
-ficheriro1.txt
-query
-2
-${cwd}/tmp/build/
-ficheriro1.txt
-localhost-fd
-query
-6
-TestVolume001
-query
-7
-1
-query
-8
-localhost-fd
-query
-9
-Default
-query
-10
-query
-11
-query
-12
-1
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=File file=<${cwd}/tmp/restore-list
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-
-check_two_logs
-check_restore_tmp_build_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory but
-# create three volumes and do six backups causing the
-# volumes to be recycled, and cycling through the volumes
-# twice. Tests maxvoljobs and volretention.
-#
-TestName="recycle-test"
-JobName=Recycle
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=File1 volume=TestVolume001
-label storage=File1 volume=TestVolume002
-label storage=File1 volume=TestVolume003
-update Volume=TestVolume001 volretention=10s
-update Volume=TestVolume001 maxvoljobs=1
-update Volume=TestVolume002 volretention=10s
-update Volume=TestVolume002 maxvoljobs=1
-update Volume=TestVolume003 volretention=10s
-update Volume=TestVolume003 maxvoljobs=1
-list volumes
-run job=$JobName storage=File1 level=full yes
-wait
-messages
-list volumes
-run job=$JobName storage=File1 level=full yes
-wait
-messages
-list volumes
-run job=$JobName storage=File1 level=full yes
-wait
-messages
-list volumes
-@sleep 10
-run job=$JobName storage=File1 level=full yes
-wait
-messages
-list volumes
-run job=$JobName storage=File1 level=full yes
-wait
-messages
-list volumes
-run job=$JobName storage=File1 level=full yes
-wait
-messages
-list volumes
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File1
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File1
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup four times, each with incremental then finally restore.
-# It should require at least 4 different bsrs.
-#
-TestName="relabel-tape"
-JobName=Relabeltape
-. scripts/functions
-set_debug 0
-
-scripts/cleanup-tape
-scripts/copy-tape-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName level=Full yes
-wait
-messages
-add pool=Default
-0
-TestVolume002
-@# set status to append
-update volume=TestVolume001
-1
-.
-run job=NightlySave level=Full yes
-@sleep 20
-unmount
-unmount
-purge volume=TestVolume001
-relabel oldvolume=TestVolume001 volume=TestVolume003 slot=0 pool=Default
-list volumes
-mount
-messages
-wait
-run job=$JobName level=Full yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-
-
-echo "Backup done"
-#
-# now do several restores to ensure we cleanup between jobs
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-@$out tmp/log2.out
-@#
-@# now unmount the tape and start two restores
-@# at the same time
-@#
-unmount storage=DDS-4
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-restore where=${cwd}/tmp/bacula-restores select
-unmark *
-mark *
-done
-yes
-mount storage=DDS-4
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bconsole
-
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape where the maximum tape file size is set to 1M
-# then restore a few files from it. Note, by setting the maximum
-# file size to 1M, it runs very slow. There are about 64 files that
-# are created during each of the two backups.
-#
-TestName="restore-by-file-tape"
-JobName=restorebyfile
-. scripts/functions
-set_debug 0
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-sed s%\^%${cwd}% ${cwd}/scripts/flist >${cwd}/tmp/restore2-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName level=Full yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=DDS-4 file=<${cwd}/tmp/restore2-list
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-dstat=0
-#
-# We need to stop and start Bacula to
-# test appending to a previously written tape
-#
-for i in `cat ${cwd}/tmp/restore2-list`; do
- diff $i ${cwd}/tmp/bacula-restores$i
- if [ $? != 0 ] ; then
- dstat=1
- fi
-done
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Full yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores
-7
-<${cwd}/tmp/restore2-list
-
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-#
-# Bacula was stopped, but we must restart it to
-# test appending to a previously written tape
-#
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-
-scripts/check_for_zombie_jobs storage=DDS-4
-bin/bacula stop 2>&1 >/dev/null
-for i in `cat ${cwd}/tmp/restore2-list`; do
- diff $i ${cwd}/tmp/bacula-restores$i
- if [ $? != 0 ] ; then
- dstat=1
- fi
-done
-
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then restore it.
-#
-
-TestName="restore-by-file-test"
-JobName=restorebyfile
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/tmp/build" >/tmp/file-list
-mkdir ${cwd}/tmp/build
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp/build
-ls >../1
-cd ..
-sed s%\^%${cwd}/tmp/build/% 1 >restore-list
-rm -f 1
-cd ${cwd}
-
-change_jobname CompressedTest $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=File
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-check_restore_tmp_build_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a backup of the full bacula build directory, but with the
-# Maximum File Size set. Then do a restore of a few files to kick in
-# disk seeking (not yet enabled), and ensure that the restored files
-# match. Even though disk seeking is not yet enabled, this is a good test,
-# and once it is enabled, this will test it.
-#
-TestName="restore-disk-seek-test"
-JobName=restore-disk-seek
-. scripts/functions
-set_debug 0
-
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/tmp/build" >/tmp/file-list
-rm -rf ${cwd}/tmp/build
-mkdir ${cwd}/tmp/build
-# Copy only the .c files (to be restored)
-# set files to "*.c" for all c files
-files="ua_tree.c ua_update.c"
-# files="*.c"
-for i in ${files}; do
- cp -p ${cwd}/build/src/dird/${i} ${cwd}/tmp/build
-done
-cd ${cwd}/tmp/build
-ls >../1
-cd ..
-sed s%\^%${cwd}/tmp/build/% 1 >restore-list
-#
-# At this point restore-list contains the list
-# of files we will restore
-#
-rm -f 1
-cd ${cwd}
-#
-# Now arrange to backup *everything*
-#
-rm -rf ${cwd}/tmp/build
-mkdir ${cwd}/tmp/build
-cp -fp ${cwd}/build/src/dird/* ${cwd}/tmp/build
-#
-# Enable MaximumFileSize to ensure lots of JobMedia records and thus
-# lots of seeking
-#
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname CompressedTest $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-setdebug level=30 fd
-setdebug level=11 storage=File
-sql
-@# print the JobMedia records
-select * from JobMedia;
-
-restore bootstrap=${cwd}/tmp/kern.bsr where=${cwd}/tmp/bacula-restores storage=File
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-# Now setup a control directory of only what we *should* restore
-rm -rf ${cwd}/tmp/build
-mkdir ${cwd}/tmp/build
-for i in ${files}; do
- cp -p ${cwd}/build/src/dird/${i} ${cwd}/tmp/build
-done
-
-check_two_logs
-check_restore_tmp_build_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape where the maximum tape file size is set to 1M
-# then restore a few files from it. Note, by setting the maximum
-# file size to 1M, it runs very slow. This tests the
-# seeking capability
-#
-TestName="restore-seek-tape"
-JobName=restore-tape-seek
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-echo "${cwd}/tmp/build" >/tmp/file-list
-rm -rf ${cwd}/tmp/build
-mkdir ${cwd}/tmp/build
-# Copy only the .c files (to be restored)
-# set files to "*.c" for all c files
-files="ua_tree.c ua_update.c"
-# files="*.c"
-for i in ${files}; do
- cp -p ${cwd}/build/src/dird/${i} ${cwd}/tmp/build
-done
-cd ${cwd}/tmp/build
-ls >../1
-cd ..
-sed s%\^%${cwd}/tmp/build/% 1 >restore-list
-#
-# At this point restore-list contains the list
-# of files we will restore
-#
-rm -f 1
-cd ${cwd}
-#
-# Now arrange to backup *everything*
-#
-rm -rf ${cwd}/tmp/build
-mkdir ${cwd}/tmp/build
-cp -fp ${cwd}/build/src/dird/* ${cwd}/tmp/build
-#
-# Enable MaximumFileSize to ensure lots of JobMedia records and thus
-# lots of seeking
-#
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# Maximum File Size = 1000000% Maximum File Size = 10KB%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 pool=Default
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-setdebug level=30 fd
-setdebug level=10 storage=DDS-4
-sql
-@# print the JobMedia records
-select * from JobMedia;
-
-restore bootstrap=${cwd}/tmp/kern.bsr where=${cwd}/tmp/bacula-restores storage=DDS-4
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-# Now setup a control directory of only what we *should* restore
-rm -rf ${cwd}/tmp/build
-mkdir ${cwd}/tmp/build
-for i in ${files}; do
- cp -p ${cwd}/build/src/dird/${i} ${cwd}/tmp/build
-done
-
-check_two_logs
-check_restore_tmp_build_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then restore a few selected files.
-#
-TestName="restore2-by-file-test"
-JobName=restore2byfile
-. scripts/functions
-set_debug 0
-copy_test_confs
-
-echo "${cwd}/build" >/tmp/file-list
-sed s%\^%${cwd}% ${cwd}/scripts/flist >${cwd}/tmp/restore2-list
-
-change_jobname CompressedTest $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=File file=<${cwd}/tmp/restore2-list
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-dstat=0
-for i in `cat ${cwd}/tmp/restore2-list`; do
- diff $i ${cwd}/tmp/bacula-restores$i
- if [ $? != 0 ] ; then
- dstat=1
- fi
-done
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Test if Bacula can automatically create a Volume label.
-#
-
-TestName="runscript-test"
-
-. scripts/functions
-set_debug 0
-copy_test_confs
-
-rm -f bin/bacula-dir.conf
-/bin/cp -f scripts/bacula-dir.conf.testrunscript bin/bacula-dir.conf
-
-echo "${cwd}/build" >/tmp/file-list
-
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-label volume=TestVolume001
-@#setdebug level=100 storage=File
-@output tmp/log.RUN2.out
-run job=RUN_FD_WARNING yes
-wait
-@sleep 5
-messages
-run job=RUN_ALL_OK yes
-wait
-@sleep 5
-messages
-run job=RUN_FD_FAILED yes
-wait
-@sleep 5
-messages
-run job=RUN_DIR_FAILED yes
-wait
-@sleep 5
-messages
-st dir
-quit
-END_OF_DATA
-
-
-bin/bacula start
-cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf &> tmp/log.RUN1.out
-
-stop_bacula
-
-if grep -q 'dir: BeforeJob: run command "/bin/echo RunBeforeJob"' tmp/log.RUN1.out &&
- grep -q 'fd: ClientRunBeforeJob: ClientRunBeforeJob' tmp/log.RUN1.out &&
- grep -q 'fd: ClientAfterJob: run command "/bin/echo ClientRunAfterJob' tmp/log.RUN1.out &&
- grep -q 'dir: AfterJob: run command "/bin/echo RunAfterJob' tmp/log.RUN1.out
-then
- [ "$debug" -eq 1 ] && echo RUN_ALL_OK ok
-else
- echo "RUN_ALL_OK in error"
- rstat=1
-fi
-
-if grep -q 'dir: BeforeJob: run command "/bin/false RUN_DIR_FAILED"' tmp/log.RUN1.out &&
- grep -q 'dir: BeforeJob: RunAfterFailedJob' tmp/log.RUN1.out &&
- true # grep -q 'Backup OK -- with warnings' tmp/log.RUN1.out
-then
- [ "$debug" -eq 1 ] && echo RUN_DIR_FAILED ok
-else
- echo "RUN_DIR_FAILED in error"
- rstat=1
-fi
-
-if grep -q 'fd: ClientBeforeJob: run command "/bin/false RUN_FD_FAILED1"' tmp/log.RUN1.out &&
- grep -q 'fd: ClientBeforeJob: run command "/bin/false RUN_FD_FAILED2"' tmp/log.RUN1.out &&
- grep -q 'dir: AfterJob: run command "/bin/echo RunAfterFailedJob"' tmp/log.RUN1.out
-then
- [ "$debug" -eq 1 ] && echo RUN_FD_FAILED ok
-else
- echo "RUN_FD_FAILED in error"
- rstat=1
-fi
-
-if grep -q 'fd: ClientBeforeJob: run command "/bin/false RUN_FD_WARNING"' tmp/log.RUN1.out &&
- grep -q 'Backup OK -- with warnings' tmp/log.RUN1.out
-then
- [ "$debug" -eq 1 ] && echo RUN_FD_WARNING ok
-else
- echo "RUN_FD_WARNING in error"
- rstat=1
-fi
-
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to two tapes where the maximum tape file size is set to 1M
-# Note, this test simulates the tape filling and writing to
-# the next tape. One minor wrinkle: we create the two tapes
-# in the Scratch pool, so they should be switched to the Default
-# Pool automatically.
-# We set TestVolume001 to not in the changer, so the algorithm
-# should find TestVolume002 and use it rather than blocking.
-#
-# Note we use the viritual disk autochanger
-#
-TestName="scratch-pool-test"
-JobName=scratch-pool
-. scripts/functions
-set_debug 0
-
-. config.out
-if test x${AUTOCHANGER} = x/dev/null ; then
- echo "two-volume-test skipped. No autochanger."
- exit
-fi
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-2disk-confs
-scripts/prepare-two-disks
-
-echo "${cwd}/build" >/tmp/file-list
-
-outf="tmp/sed_tmp"
-echo "s%# Maximum File Size% Maximum File Size%g" >${outf}
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname NightlySave $JobName
-start_test
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 pool=Scratch drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 pool=Scratch drive=0
-update Volume=TestVolume001 MaxVolBytes=2000000 pool=Scratch drive=0
-update Volume=TestVolume001 inchanger=no pool=Scratch drive=0
-@#setdebug level=200 storage=DDS-4
-llist volume=TestVolume001
-llist volume=TestVolume002
-run job=$JobName yes
-wait
-messages
-list volumes
-llist volume=TestVolume001
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Create a 60MB file with random bytes. Back it up to 6 Volumes
-# each constrained to 10MB using the automatic labeling feature.
-#
-TestName="six-vol-test"
-JobName=SixVol
-. scripts/functions
-set_debug 0
-
-if test ! -c /dev/urandom ; then
- echo "No random device. Test skipped.\n"
- exit 0
-fi
-
-scripts/cleanup
-scripts/copy-testa-confs
-echo "${cwd}/tmp/largefile" >/tmp/file-list
-# Create 56MB file with random data
-echo "Creating a 56MB file with random data ..."
-dd if=/dev/urandom of=${cwd}/tmp/largefile bs=1024 count=55000
-echo "largefile created"
-
-change_jobname MultiVol $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName storage=File yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-diff tmp/largefile tmp/bacula-restores${cwd}/tmp/largefile 2>&1 >/dev/null
-dstat=$?
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape where the maximum tape file size is set to 1M
-#
-TestName="small-file-size-tape"
-JobName=smallfilesize
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-setdebug level=2 storage=DDS-4
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DDS-4
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory but
-# split the archive into four volumes, two of which are
-# totally full. I.e. make sure that bsr selects all tapes
-# including those fully spanned.
-#
-TestName="span-vol-test"
-JobName=SpanVol
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=File1 volume=TestVolume004
-label storage=File1 volume=TestVolume003
-label storage=File1 volume=TestVolume002
-label storage=File1 volume=TestVolume001
-update Volume=TestVolume004 MaxVolBytes=3000000
-update Volume=TestVolume003 MaxVolBytes=3000000
-update Volume=TestVolume002 MaxVolBytes=3000000
-run job=$JobName storage=File1 yes
-wait
-list volumes
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File1
-unmark *
-mark *
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File1
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the Sparse option
-# then restore it.
-#
-TestName="sparse-compressed-test"
-JobName=Sparse-conpressed
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-
-start_test
-
-cat >tmp/bconcmds <<END_OF_DATA
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-run job=SparseCompressedTest yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=File done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup with encryption and a real sparse file.
-#
-TestName="sparse-encrypt-test"
-JobName=Crypto
-. scripts/functions
-set_debug 0
-
-scripts/cleanup
-scripts/copy-crypto-confs
-echo "${cwd}/build" >/tmp/file-list
-cd ${cwd}/build/src/tools
-./gigaslam
-if [ $? != 0 ]; then
- echo "Execute of ${cwd}/build/src/tools/gigaslam failed."
- rm -f ${cwd}/build/src/tools/gigaslam.gif
- exit 1
-fi
-cd ${cwd}
-
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-setdebug level=10 fd
-run job=$JobName yes
-wait
-messages
-list volumes
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-@# setdebug level=0 fd
-restore where=${cwd}/tmp/bacula-restores storage=File
-5
-mark *
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-sleep 2
-check_for_zombie_jobs storage=File
-stop_bacula
-
-size=`du ${cwd}/tmp/bacula-restores/${cwd}/build/src/tools/gigaslam.gif | cut -f 1`
-if [ $size -gt 120 ]; then
- echo "========== restored sparse file: gigaslam.gif too big ========="
- echo " size is ${size}K it should be 120K"
-fi
-
-check_two_logs
-check_restore_diff
-end_test
-rm -f ${cwd}/build/src/tools/gigaslam.gif
-rm -r ${cwd}/build/gigaslam.gif
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the Sparse option
-# then restore it.
-#
-TestName="sparse-test"
-JobName=SparseTest
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-
-start_test
-
-cat >tmp/bconcmds <<END_OF_DATA
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-echo " " >test.out
-rm -f bin/working/*
+++ /dev/null
-#!/bin/sh
-#
-# Test for a tape truncation bug.
-#
-TestName="truncate-bug-tape"
-JobName=truncatebug
-. scripts/functions
-
-set_debug 0
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-@# do a bunch of saves so we have 12 files on the tape
-run job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-@#setdebug level=100 storage=DDS-4
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-scripts/check_for_zombie_jobs storage=DDS-4
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log2.out
-@#
-@# now do a restore
-@#
-restore where=${cwd}/tmp/bacula-restores storage=DDS-4
-3
-@# select JobId=4 (i.e. file five on the tape)
-4
-cd ${cwd}/build
-@# mark a single file
-mark configure
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bconsole
-scripts/check_for_zombie_jobs storage=DDS-4
-
-# Now write to tape one more time
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log3.out
-run level=Full job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-grep "^ Termination: *Backup OK" tmp/log3.out 2>&1 >/dev/null
-dstat=$?
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup a second time and finally restore it
-#
-TestName="two-jobs-test"
-JobName=Two-Jobs
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname CompressedTest $JobName
-start_test
-
-cat >tmp/bconcmds <<END_OF_DATA
-setdebug level=15 storage=File
-@output /dev/null
-messages
-@output/dev/null
-estimate job=$JobName listing
-estimate job=$JobName listing
-estimate job=$JobName listing
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-
-echo "Backup 1 done"
-touch ${cwd}/build/src/dird/*.c
-#
-# run a second job
-#
-cat >tmp/bconcmds <<END_OF_DATA
-@output /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName
-yes
-wait
-messages
-@#
-@# now do several restores to ensure we cleanup between jobs
-@#
-@output /dev/null
-restore where=${cwd}/tmp/bacula-restores select all storage=File done
-yes
-wait
-restore where=${cwd}/tmp/bacula-restores select all storage=File done
-yes
-wait
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# This is Arno's test. It uses two pools, two tapes, and
-# an autochanger. Note, the Director has three Pools in its
-# conf: Default, Full, and Inc. Default is used in the
-# NightlySave job by default. What is backed up is what
-# is in /tmp/file-list, which is by default the Bacula
-# source code (i.e. the build directory).
-#
-TestName="two-pool-tape"
-JobName=twopooltape
-. scripts/functions
-set_debug 0
-
-. config.out
-if test x${AUTOCHANGER} = x/dev/null ; then
- echo "two-pool-tape test skipped. No autochanger."
- exit
-fi
-
-scripts/cleanup
-scripts/copy-2tape-confs
-echo "Prepare two tapes"
-scripts/prepare-two-tapes
-echo "Done prepare two tapes"
-
-# Make a relatively large backup set 5 x source code directory
-echo "${cwd}/build" >/tmp/file-list
-echo "${cwd}/build" >>/tmp/file-list
-echo "${cwd}/build" >>/tmp/file-list
-echo "${cwd}/build" >>/tmp/file-list
-echo "${cwd}/build" >>/tmp/file-list
-
-start_test
-
-# Write out bconsole commands to a file
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 pool=Full drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 pool=Default drive=0
-list volumes
-@# Start job with Client run before and sleep
-run job=NightlySave1 level=Full pool=Default yes
-run job=NightlySave1 level=Full pool=Default yes
-run job=NightlySave1 level=Full pool=Default yes
-@# wait between starting jobs
-@sleep 60
-@#setdebug level=100 storage=DDS-4
-run job=NightlySave2 level=Full pool=Full yes
-run job=NightlySave2 level=Full pool=Full yes
-run job=NightlySave2 level=Full pool=Full yes
-@sleep 10
-messages
-@sleep 10
-messages
-@sleep 10
-status storage=DDS-4
-messages
-wait
-list volumes
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# This is Arno's test. It uses two pools, two tapes, and
-# an autochanger. Note, the Director has three Pools in its
-# conf: Default, Full, and Inc. Default is used in the
-# NightlySave job by default. What is backed up is what
-# is in /tmp/file-list, which is by default the Bacula
-# source code (i.e. the build directory).
-#
-# Note, we use the virtual disk autochanger.
-#
-TestName="two-pool-test"
-JobName=Two-pool
-. scripts/functions
-set_debug 0
-
-. config.out
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-2disk-confs
-scripts/prepare-two-disks
-
-# Make a relatively large backup set 5 x source code directory
-# Reduced to 1 for portable
-echo "${cwd}/build" >/tmp/file-list
-
-start_test
-
-# Write out bconsole commands to a file
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 pool=Full drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 pool=Default drive=0
-list volumes
-@# Start job with Client run before and sleep
-run job=NightlySave1 level=Full pool=Default yes
-run job=NightlySave1 level=Full pool=Default yes
-run job=NightlySave1 level=Full pool=Default yes
-@# wait between starting jobs
-@sleep 60
-@#setdebug level=100 storage=DDS-4
-run job=NightlySave2 level=Full pool=Full yes
-run job=NightlySave2 level=Full pool=Full yes
-run job=NightlySave2 level=Full pool=Full yes
-@sleep 10
-messages
-@sleep 10
-messages
-@sleep 10
-status storage=DDS-4
-messages
-wait
-list volumes
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory but
-# split the archive into two volumes
-#
-TestName="two-vol-test"
-JobName=TwoVol
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File1 volume=TestVolume002
-label storage=File1 volume=TestVolume001
-update Volume=TestVolume002 MaxVolBytes=3000000
-run job=$JobName storage=File1 yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=File1 done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File1
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to two tapes where the maximum tape file size is set to 1M
-# Note, this test simulates the tape filling and writing to
-# the next tape.
-#
-TestName="two-volume-tape"
-JobName=twovoltape
-. scripts/functions
-set_debug 0
-
-
-. config.out
-if test x${AUTOCHANGER} = x/dev/null ; then
- echo "two-volume-tape test skipped. No autochanger."
- exit
-fi
-
-scripts/cleanup
-scripts/copy-2tape-confs
-scripts/prepare-two-tapes
-
-echo "${cwd}/build" >/tmp/file-list
-
-outf="tmp/sed_tmp"
-echo "s%# Maximum File Size% Maximum File Size%g" >${outf}
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname $JobName
-start_test
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 pool=Default drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 pool=Default drive=0
-update Volume=TestVolume001 MaxVolBytes=3000000 pool=Default drive=0
-@#setdebug level=1000 client
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-mt -f ${TAPE_DRIVE} rewind
-mtx -f ${AUTOCHANGER} unload
-sleep 15
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to two tapes where the maximum tape file size is set to 1M
-# Note, this test simulates the tape filling and writing to
-# the next tape.
-#
-# Note we use the viritual disk autochanger
-#
-TestName="two-volume-test"
-JobName=TwoVolume
-. scripts/functions
-set_debug 0
-. config.out
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-2disk-confs
-scripts/prepare-two-disks
-
-echo "${cwd}/build" >/tmp/file-list
-
-outf="tmp/sed_tmp"
-echo "s%# Maximum File Size% Maximum File Size%g" >${outf}
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname NightlySave $JobName
-start_test
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 pool=Default drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 pool=Default drive=0
-update Volume=TestVolume001 MaxVolBytes=3000000 pool=Default drive=0
-@#setdebug level=1000 client
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the /usr directory
-# then restore it.
-#
-cwd=`pwd`
-scripts/copy-tape-confs
-scripts/cleanup-tape
-echo "/usr" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting usr-tape-root test ==="
-echo " "
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 Volume=TestVolume001 slot=0
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/original
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/restored
-cd ${cwd}/tmp
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% original >1
-sort <1 >original
-#
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% restored >1
-sort <1 >restored
-rm -f 1
-#
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/nul
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== !!!! usr-tape-root failed !!!! ===== "
- echo " ===== !!!! usr-tape-root failed !!!! ===== " >>test.out
- echo " "
-else
- echo " ===== usr-tape-root OK ===== "
- echo " ===== usr-tape-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then verify the catalog.
-#
-TestName="verify-vol-tape"
-JobName=VerifyVol
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-setdebug level=1 storage=DDS-4 sd
-label storage=DDS-4 volume=TestVolume001 pool=Default
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a verify volume
-@#
-@$out ${cwd}/tmp/original
-run job=VerifyTape pool=Default
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-
-sleep 2
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-grep "^ Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^ Termination: *Verify OK" ${cwd}/tmp/original 2>&1 >/dev/null
-rstat=$?
-dstat=0
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then verify the catalog.
-#
-TestName="verify-vol-test"
-JobName=VerifyVol
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-setdebug level=1 storage=File sd
-label storage=File volume=TestVolume001
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a verify volume
-@#
-@$out ${cwd}/tmp/original
-run job=VerifyVolume
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-
-sleep 2
-check_for_zombie_jobs storage=File
-stop_bacula
-
-grep "^ Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^ Termination: *Verify OK" ${cwd}/tmp/original 2>&1 >/dev/null
-rstat=$?
-dstat=0
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-TestName="weird-files-test"
-JobName=wierd-files
-. scripts/functions
-set_debug 0
-
-if test ! -d weird-files ; then
- echo " "
- echo "Weird files not configured. Test not run."
- exit 0
-fi
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-change_jobname NightlySave $JobName
-#
-# Note, we save the weird-files directory twice on purpose
-# because this causes problems with hard linked files
-# that are only saved once. In 1.33, Bacula now deals
-# with this situation.
-#
-echo "${cwd}/weird-files" >/tmp/file-list
-echo "${cwd}/weird-files" >>/tmp/file-list
-
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File
-TestVolume001
-run job=$JobName
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-${cwd}/bin/testls weird-files | sort >${cwd}/tmp/original
-cd tmp/bacula-restores${cwd}
-${cwd}/bin/testls weird-files | sort >${cwd}/tmp/restored
-cd ${cwd}
-
-check_two_logs
-diff ${cwd}/tmp/original ${cwd}/tmp/restored 2>&1 >/dev/null
-dstat=$?
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-TestName="weird-files2-test"
-JobName=weird-files2
-. scripts/functions
-set_debug 0
-
-if test ! -d weird-files ; then
- echo " "
- echo "weird files not configured. Test not run."
- exit 0
-fi
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-rm -rf weird-files2
-cp -Rp weird-files weird-files2
-echo "${cwd}/weird-files2" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-bin/testls weird-files2 >${cwd}/tmp/original
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-run job=$JobName yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-#
-# Now mess up the a hard link, and a soft link
-#
-cd weird-files2
-rm -f hard-file2
-ln hard-file3 hard-file2
-rm -f soft-file2
-ln -s soft-file3 soft-file2
-cd ${cwd}
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where= storage=File
-5
-unmark *
-mark *
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=File
-stop_bacula
-
-bin/testls weird-files2 >${cwd}/tmp/restored
-
-check_two_logs
-diff ${cwd}/tmp/original ${cwd}/tmp/restored 2>&1 >/dev/null
-dstat=$?
-
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape then restore it, we do that twice to ensure that
-# we can correctly append to a tape.
-#
-TestName="win32-backup-tape"
-JobName=win32tape
-. scripts/functions
-set_debug 0
-
-scripts/copy-win32-confs
-scripts/cleanup-tape
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default drive=0
-run job=$JobName yes
-@sleep 10
-status storage=DDS-4
-@sleep 30
-messages
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=c:/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-# no diff for now
-dstat=0
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape then restore it, we do that twice to ensure that
-# we can correctly append to a tape.
-#
-TestName="win32-to-linux-tape"
-JobName=AutoLabel
-. scripts/functions
-set_debug 0
-
-scripts/copy-win32-confs
-scripts/cleanup-tape
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_job $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default drive=0
-run job=NightlySave yes
-@sleep 10
-status storage=DDS-4
-@sleep 30
-messages
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=/tmp/bacula-restores client=Tibs select all storage=DDS-4 done
-yes
-wait
-messages
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-# No diff for the moment
-dstat=0
-end_test
+++ /dev/null
-REM
-REM Run all tape tests
-REM
-CALL tests\test0
-CALL tests\two-volume-tape
-CALL tests\incremental-2tape
-ECHO.
-ECHO.
-echo 2 Tape Test results
-TYPE test.out
-CALL scripts\cleanup
+++ /dev/null
-REM
-REM Run all tape tests
-REM
-CALL config_var
-IF NOT "%AUTOCHANGER%" == "nul" mtx -f %AUTOCHANGER% load 1 >nul 2>&1
-COPY test.out test1.out
-CALL tests\test0
-CALL tests\backup-bacula-tape
-CALL tests\btape-fill-tape
-CALL tests\fixed-block-size-tape
-CALL tests\four-concurrent-jobs-tape
-CALL tests\four-jobs-tape
-CALL tests\incremental-tape
-CALL tests\relabel-tape
-CALL tests\restore-by-file-tape
-CALL tests\small-file-size-tape
-CALL tests\truncate-bug-tape
-CALL tests\two-pool-tape
-CALL tests\2drive-incremental-2tape
-CALL tests\bscan-tape
-CALL tests\verify-vol-tape
-ECHO.
-ECHO.
-ECHO Test results
-TYPE test.out
-CALL scripts\cleanup
+++ /dev/null
-REM
-REM Run all tests
-REM
-DEL test1.out
-CALL tests\test0
-ECHO.
-CALL tests\auto-label-test
-CALL tests\backup-bacula-test
-CALL tests\bextract-test
-CALL tests\bscan-test
-CALL tests\bsr-opt-test
-CALL tests\compressed-test
-CALL tests\concurrent-jobs-test
-CALL tests\data-encrypt-test
-CALL tests\differential-test
-CALL tests\four-concurrent-jobs-test
-CALL tests\four-jobs-test
-CALL tests\incremental-test
-CALL tests\query-test
-CALL tests\recycle-test
-CALL tests\restore2-by-file-test
-CALL tests\restore-by-file-test
-CALL tests\restore-disk-seek-test
-CALL tests\six-vol-test
-CALL tests\span-vol-test
-CALL tests\sparse-compressed-test
-CALL tests\sparse-test
-CALL tests\two-jobs-test
-CALL tests\two-vol-test
-CALL tests\verify-vol-test
-REM CALL tests\weird-files2-test
-REM CALL tests\weird-files-test
-CALL tests\migration-job-test
-CALL tests\migration-jobspan-test
-CALL tests\migration-volume-test
-CALL tests\migration-time-test
-REM CALL tests\hardlink-test
-REM
-REM The following are Virtual Disk Autochanger tests
-CALL tests\two-pool-test
-CALL tests\two-volume-test
-CALL tests\incremental-2disk
-CALL tests\2drive-incremental-2disk
-CALL tests\scratch-pool-test
-ECHO.
-ECHO Test results
-TYPE test.out
-CALL scripts\cleanup
+++ /dev/null
-REM
-REM Run all root tests
-REM
-DEL test.out
-CALL tests\dev-test-root
-CALL tests\etc-test-root
-CALL tests\lib-test-root
-CALL tests\usr-tape-root
-TYPE test.out
-CALL scripts\cleanup
+++ /dev/null
-REM
-REM Run all tests
-REM
-CALL all-non-root-tests
-CALL all-non-root-tape-tests
+++ /dev/null
-REM
-REM Run all tests
-REM
-CALL all-non-root-tests
-CALL all-root-tests
-TYPE test.out
-CALL scripts\cleanup
+++ /dev/null
-@ECHO off
-REM
-REM First argument is expected to be a user's configuration file
-REM
-IF "%1" == "" (
- ECHO Arg1 must specify a config file ^(e.g. prototype.conf^)
- EXIT /b 1
-)
-
-COPY %1 config_var.cmd
+++ /dev/null
-@ECHO off
-REM
-REM Makefile for Bacula regression testing
-REM
-REM Note, Makefile is built from Makefile.in, which you should not really
-REM need to change, by invoking:
-REM
-REM config <user's configuration>
-REM
-REM e.g.
-REM config kern.conf
-REM
-
-SETLOCAL
-
-IF EXIST config_var.cmd GOTO :already_configured
-ECHO You must run config first and supply the name of your conf file.
-ECHO Use prototype.conf as a template.
-EXIT /B 1
-
-:already_configured
-
-SET PATH=%PATH%;%CD%\bin;%CD%\tools
-
-REM suck in user's configuration
-CALL config_var.cmd
-
-IF EXIST "%BACULA_SOURCE%\configure" GOTO :source_ok
-ECHO Unable to access the Bacula source in %BACULA_SOURCE%. Update
-ECHO BACULA_SOURCE in your configuration file and rerun config.
-EXIT /B 1
-
-:source_ok
-IF "%1" == "setup" GOTO :setup
-IF "%1" == "bacula" GOTO :bacula
-IF "%1" == "sed" GOTO :sed
-IF "%1" == "test" GOTO :test
-IF "%1" == "full_test" GOTO :full_test
-IF "%1" == "root_test" GOTO :root_test
-IF "%1" == "clean" GOTO :clean
-IF "%1" == "reset" GOTO :reset
-IF "%1" == "distclean" GOTO :distclean
-
-IF EXIST "%1" (
- %1
-) ELSE IF EXIST "%1.cmd" (
- %1
-) ELSE IF EXIST tests\%1 (
- tests\%1
-) ELSE IF EXIST tests\%1.cmd (
- tests\%1
-) ELSE (
- ECHO Unsupported option: %1
- ECHO Valid options are:
- ECHO setup, bacula, sed, test, full_test, root_test, clean, reset, distclean
- EXIT /b 1
-)
-
-:setup
-CALL :bacula %2
-CALL :sed
-GOTO :EOF
-
-:bacula
-RD /s /q build bin weird-files tmp working 2>nul
-MKDIR tmp working
-SET BUILD_TYPE=%1
-IF "%BUILD_TYPE%"=="" SET BUILD_TYPE=release
-ECHO Doing: scripts\setup "%BACULA_SOURCE%" %BUILD_TYPE% %EMAIL% %SMTP_HOST% %TAPE_DRIVE% %AUTOCHANGER% %AUTOCHANGER_PATH% %TAPE_DRIVE1%
-CALL scripts\setup "%BACULA_SOURCE%" %BUILD_TYPE% %EMAIL% %SMTP_HOST% %TAPE_DRIVE% %AUTOCHANGER% %AUTOCHANGER_PATH% %TAPE_DRIVE1%
-GOTO :EOF
-
-:sed
-ECHO Doing: scripts\do_sed %EMAIL% %SMTP_HOST% %TAPE_DRIVE% %AUTOCHANGER% %AUTOCHANGER_PATH% %TAPE_DRIVE1%
-CALL scripts\do_sed %EMAIL% %SMTP_HOST% %TAPE_DRIVE% %AUTOCHANGER% %AUTOCHANGER_PATH% %TAPE_DRIVE1%
-GOTO :EOF
-
-:test
-REM Run all non-root userid tests
-CALL all-non-root-tests
-GOTO :EOF
-
-:full_test
-REM run all file and tape tests
-CALL all-tape-and-file-tests
-GOTO :EOF
-
-:root_test
-REM These tests require you to run as root
-CALL all-root-tests
-GOTO :EOF
-
-:clean
-CALL scripts\cleanup
-DEL \tmp\file-list tmp\* working\* test.out diff >nul 2>&1
-DEL 1 2 3 scripts\1 scripts\2 scripts\3 tests\1 tests\2 tests\3 >nul 2>&1
-DEL .#* /s >nul 2>&1
-GOTO :EOF
-
-:reset
-REM Reset our userid after running as root
-CALL scripts\cleanup
-DEL \tmp\file-list tmp\file-list
-DEL tmp\* working\*
-GOTO :EOF
-
-:distclean
-RD /s /q bin build weird-files weird-files weird-files2 tmp working 2>nul
-DEL scripts\*.conf
-CALL :clean
-GOTO :EOF
+++ /dev/null
-REM
-REM Prototype personal configuration file for the regression
-REM scripts. Either edit this file directly, or better copy
-REM it elsewhere so it won't get overwritten.
-REM
-
-REM
-REM Put the full path to the Bacula source code to be tested
-REM
-SET BACULA_SOURCE=
-
-REM Where to send email messages
-REM
-SET EMAIL=
-SET SMTP_HOST=localhost
-
-REM
-REM The device name of your tape drive if you have one
-REM
-SET TAPE_DRIVE=tape0
-SET TAPE_DRIVE1=nul
-
-REM
-REM if you don't have an autochanger set AUTOCHANGER to nul
-REM
-SET AUTOCHANGER=changer0
-
-REM
-REM This must be the path to the autochanger including its name
-REM
-SET AUTOCHANGER_PATH=%CD%\bin\mtx
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.39
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
- Messages = Daemon
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-# Prefer Mounted Volumes = no
-}
-
-Job {
- Name = "migrate-job"
- Type = Migrate
- Level = Full
- Client=@hostname@-fd
- FileSet="Full Set"
- Messages = Standard
- Storage = DiskChanger
- Write Bootstrap = "@working_dir@/migratejob.bsr"
- Pool = Default
- Maximum Concurrent Jobs = 4
- Selection Type = Job
- Selection Pattern = ".*Save"
-}
-
-Job {
- Name = "migrate-volume"
- Type = Migrate
- Level = Full
- Client=@hostname@-fd
- FileSet="Full Set"
- Messages = Standard
- Storage = DiskChanger
- Write Bootstrap = "@working_dir@/migratevol.bsr"
- Pool = Default
- Maximum Concurrent Jobs = 4
- Selection Type = Volume
- Selection Pattern = "File*"
-}
-
-Job {
- Name = "migrate-occupancy"
- Type = Migrate
- Level = Full
- Client=@hostname@-fd
- FileSet="Full Set"
- Messages = Standard
- Storage = DiskChanger
- Write Bootstrap = "@working_dir@/migratejob.bsr"
- Pool = Default
- Maximum Concurrent Jobs = 4
- Selection Type = PoolOccupancy
-}
-
-Job {
- Name = "migrate-time"
- Type = Migrate
- Level = Full
- Client=@hostname@-fd
- FileSet="Full Set"
- Messages = Standard
- Storage = DiskChanger
- Write Bootstrap = "@working_dir@/migratejob.bsr"
- Pool = Default
- Maximum Concurrent Jobs = 4
- Selection Type = PoolTime
-}
-
-
-
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include { Options { signature=MD5 }
- File = </tmp/file-list
- }
-}
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definition of DDS Virtual tape disk storage device
-Storage {
- Name = DiskChanger
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
- Device = DiskChanger # must be same as Device in Storage daemon
- Media Type = DiskChanger # must be same as MediaType in Storage daemon
- Maximum Concurrent Jobs = 4
- Autochanger = yes
-}
-
-# Definition of file storage device
-Storage {
- Name = File
- Address = @hostname@
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
- Device = FileStorage
- Media Type = File
- Maximum Concurrent Jobs = 5
-}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression Job %j\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression Job %j\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all, !terminate
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-#
-# Message delivery for daemon messages (no job).
-Messages {
- Name = Daemon
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula\) %r\" -s \"Bacula daemon message\" %r"
- mail = @job_email@ = all, !skipped
- console = all, !skipped, !saved
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
- NextPool = Full
- Storage = File
- Migration High Bytes = 40M
- Migration Low Bytes = 20M
- Migration Time = 60
-}
-
-Pool {
- Name = Full
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
- Storage = DiskChanger
-}
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.33
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
- Messages = Daemon
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-# Prefer Mounted Volumes = no
-}
-
-Job {
- Name = "NightlySave1"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-# Prefer Mounted Volumes = no
- Client Run Before Job = "@sbindir@/bsleep 120"
-}
-
-Job {
- Name = "NightlySave2"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-# Prefer Mounted Volumes = no
-}
-
-Job {
- Name = "VerifyTape"
- Type = Verify
- Level = VolumeToCatalog
- Client=@hostname@-fd
- FileSet="Verify Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-# Prefer Mounted Volumes = no
-}
-
-
-
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include { Options { signature=MD5 }
- File = </tmp/file-list
- }
-}
-
-FileSet {
- Name = "Verify Set"
- Include {
- Options {
- signature=MD5
- verify=pins1
- }
- File = </tmp/file-list
- }
-}
-
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definition of DDS tape storage device
-Storage {
- Name = DDS-4
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
- Device = DDS-4 # must be same as Device in Storage daemon
- Media Type = DDS-4 # must be same as MediaType in Storage daemon
- Maximum Concurrent Jobs = 4
-# Autochanger = yes
-}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression Job %j\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression Job %j\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all, !terminate
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-#
-# Message delivery for daemon messages (no job).
-Messages {
- Name = Daemon
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula\) %r\" -s \"Bacula daemon message\" %r"
- mail = @job_email@ = all, !skipped
- console = all, !skipped, !saved
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
-
-Pool {
- Name = Full
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
-
-Pool {
- Name = Inc
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
-
-Pool {
- Name = Scratch
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.33
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
- Messages = Daemon
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=Tibs
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-}
-
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=Tibs
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Enable VSS = yes
- Include { Options { signature=MD5 }
- File = "c:"
- }
-}
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# Client (File Services) to backup
-Client {
- Name = Tibs
- Address = tibs
- FDPort = 9102
- Catalog = MyCatalog
- Password = "xBzFq+a9llZyGyfMaNO9e3outP86/1AUAT8P34RoT62G"
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definition of DDS tape storage device
-Storage {
- Name = DDS-4
- Address = 192.168.68.112 # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
- Device = DDS-4 # must be same as Device in Storage daemon
- Media Type = DDS-4 # must be same as MediaType in Storage daemon
- AutoChanger = yes
- Maximum Concurrent Jobs = 4
-}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression Job %j\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression Job %j\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all, !terminate
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-#
-# Message delivery for daemon messages (no job).
-Messages {
- Name = Daemon
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula\) %r\" -s \"Bacula daemon message\" %r"
- mail = @job_email@ = all, !skipped
- console = all, !skipped, !saved
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.39.27 (24 October 2006) -- debian testing/unstable
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- SubSysDirectory = "@subsysdir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3" # Console password
- Messages = Standard
-}
-
-JobDefs {
- Name = "DefaultJob"
- Type = Backup
- Level = Incremental
- Client = @hostname@-fd
- FileSet = FS_TESTJOB
- Storage = File
- Messages = Standard
- Pool = Default
- Priority = 10
- Maximum Concurrent Jobs = 16
-}
-
-FileSet {
- Name = FS_TESTJOB
- Include {
- File=</tmp/file-list
- }
-}
-
-#dir: BeforeJob: run command "/bin/echo RunBeforeJob"
-#fd: ClientRunBeforeJob: ClientRunBeforeJob
-#fd: ClientAfterJob: run command "/bin/echo ClientRunAfterJob"
-#dir: AfterJob: run command "/bin/echo RunAfterJob"
-
-Job {
- Name = "RUN_ALL_OK"
- JobDefs = DefaultJob
- FileSet = FS_TESTJOB
- RunBeforeJob = "/bin/echo RunBeforeJob"
- ClientRunBeforeJob = "/bin/echo ClientRunBeforeJob"
- Run After Job = "/bin/echo RunAfterJob"
- ClientRunAfterJob = "/bin/echo ClientRunAfterJob"
-}
-
-#After job are after before job
-Job {
- Name = "RUN_DIR_FAILED_BUG"
- FileSet = FS_TESTJOB
- JobDefs = DefaultJob
- Run After Failed Job = "/bin/echo RunAfterFailedJob"
- RunBeforeJob = "/bin/false"
-}
-
-#@hostname@-dir: BeforeJob: run command "/bin/false"
-#@hostname@-dir: BeforeJob: RunAfterFailedJob
-Job {
- Name = "RUN_DIR_FAILED"
- FileSet = FS_TESTJOB
- JobDefs = DefaultJob
- RunBeforeJob = "/bin/false RUN_DIR_FAILED"
- Run After Failed Job = "/bin/echo RunAfterFailedJob"
-}
-
-#@hostname@-fd: ClientBeforeJob: run command "/bin/false RUN_FD_FAILED1"
-#@hostname@-fd: ClientBeforeJob: run command "/bin/false RUN_FD_FAILED2"
-#@hostname@-dir: AfterJob: run command "/bin/echo RunAfterFailedJob"
-Job {
- Name = "RUN_FD_FAILED"
- FileSet = FS_TESTJOB
- JobDefs = DefaultJob
- RunScript {
- Command = "/bin/false RUN_FD_FAILED1"
- abortjobonerror = no
- RunsWhen = Before
- }
- RunScript {
- Command = "/bin/false RUN_FD_FAILED2"
- abortjobonerror = yes
- RunsWhen = Before
- }
-
- Run After Failed Job = "/bin/echo RunAfterFailedJob"
-}
-
-#@hostname@-fd: ClientBeforeJob: run command "/bin/false RUN_FD_WARNING"
-#Backup OK -- with warnings
-Job {
- Name = "RUN_FD_WARNING"
- FileSet = FS_TESTJOB
- JobDefs = DefaultJob
- RunScript {
- Command = "/bin/false RUN_FD_WARNING"
- abortjobonerror = no
- RunsWhen = Before
- }
- Run After Failed Job = "/bin/echo RunAfterFailedJob"
-}
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definiton of file storage device
-Storage {
- Name = File
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage
- Media Type = File
- Maximum Concurrent Jobs = 4
-}
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-
-Messages {
- Name = Standard
- stdout = all, !skipped
-}
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.39
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-Autochanger {
- Name = DDS-4
- Changer Device = @disk_drive@/conf
- Changer Command ="\"@scriptdir@\\disk-changer\" %c %o %S %a %d"
- Device = Drive-0, Drive-1
-}
-
-Device {
- Name = Drive-0
- Device Type = File
- Media Type = DDS-4
- Archive Device = @disk_drive@/drive0
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 0
- AlwaysOpen = yes;
- RemovableMedia = yes;
-# Maximum File Size = 1000000
-}
-
-Device {
- Name = Drive-1
- Device Type = File
- Media Type = DDS-4
- Archive Device = @disk_drive@/drive1
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 1
- AlwaysOpen = yes;
- RemovableMedia = yes;
-# Maximum File Size = 1000000
-}
-
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.39
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-Autochanger {
- Name = DDS-4
- Changer Device = "@disk_drive@\\conf"
- Changer Command ="\"@scriptdir@\\disk-changer\" %c %o %S %a %d"
- Device = Drive-0
-}
-
-Device {
- Name = Drive-0 #
- Device Type = File
- Media Type = DDS-4
- Archive Device = "@disk_drive@\\drive0"
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 0
- AlwaysOpen = yes;
- RemovableMedia = yes;
-# Maximum File Size = 1000000
-}
-
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-Autochanger {
- Name = DDS-4
- Changer Device = @autochanger@
- Changer Command ="@scriptdir@/mtx-changer %c %o %S %a %d"
- Device = Drive-0, Drive-1
-}
-
-Device {
- Name = Drive-0
- Media Type = DDS-4
- Archive Device = @tape_drive@
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 0
- AlwaysOpen = yes;
- RemovableMedia = yes;
- @@sbindir@/tape_options
-# Maximum File Size = 1000000
-}
-
-Device {
- Name = Drive-1
- Media Type = DDS-4
- Archive Device = @tape_drive1@
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 1
- AlwaysOpen = yes;
- RemovableMedia = yes;
- @@sbindir@/tape_options
-# Maximum File Size = 1000000
-}
-
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-Autochanger {
- Name = DDS-4
- Changer Device = @autochanger@
- Changer Command ="@scriptdir@/mtx-changer %c %o %S %a %d"
- Device = Drive-0
-}
-
-Device {
- Name = Drive-0 #
- Media Type = DDS-4
- Archive Device = @tape_drive@
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 0
- AlwaysOpen = yes;
- RemovableMedia = yes;
- @@sbindir@/tape_options
-# Maximum File Size = 1000000
-}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.39
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-Autochanger {
- Name = DiskChanger
- Changer Device = @disk_drive@/conf
- Changer Command ="@scriptdir@/disk-changer %c %o %S %a %d"
- Device = Drive-0
-}
-
-Device {
- Name = Drive-0 #
- Device Type = File
- Media Type = DiskChanger
- Archive Device = @disk_drive@/drive0
- AutomaticMount = yes; # when device opened, read it
- Autochanger = yes
- Drive Index = 0
- AlwaysOpen = yes;
- RemovableMedia = yes;
-# Maximum File Size = 1000000
-}
-
-Device {
- Name = FileStorage
- Media Type = File
- Archive Device = @tmpdir@
- LabelMedia = yes; # lets Bacula label unlabeled media
- Random Access = Yes;
- AutomaticMount = yes; # when device opened, read it
- RemovableMedia = no;
- AlwaysOpen = no;
-}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-
-Device {
- Name = DDS-4 #
- Media Type = DDS-4
- Archive Device = @tape_drive@
- AutomaticMount = yes; # when device opened, read it
- AlwaysOpen = yes;
- RemovableMedia = yes;
- @@sbindir@/tape_options
-# Maximum File Size = 1000000
-# MaximumVolumeSize = 400M
-}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = rufus-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "/home/kern/bacula/regress/working"
- Pid Directory = "/home/kern/bacula/regress/working"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = rufus-dir
- Password = "BzlEl8haeFmnv/Lv8V6zDzUBgFFQNsUtny6VkmccQpOy"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-
-Device {
- Name = FileStorage
- Media Type = File
- Archive Device = @tmpdir@
- LabelMedia = yes; # lets Bacula label unlabeled media
- Random Access = Yes;
- AutomaticMount = yes; # when device opened, read it
- RemovableMedia = no;
- AlwaysOpen = no;
-}
-
-#Device {
-# Name = DDS-4 #
-# Media Type = DDS-4
-# Archive Device = /dev/nst0
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = yes;
-# RemovableMedia = yes;
-#}
-
-#
-# A very old Exabyte with no end of media detection
-#
-#Device {
-# Name = "Exabyte 8mm"
-# Media Type = "8mm"
-# Archive Device = /dev/nst0
-# Hardware end of medium = No;
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = Yes;
-# RemovableMedia = yes;
-#}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = rufus-dir = all, !terminate
-}
+++ /dev/null
-@ECHO off
-IF "%1" == "start" (
- net start bacula-dir
- net start bacula-sd
- net start bacula-fd
-) ELSE IF "%1" == "stop" (
- net stop bacula-dir
- net stop bacula-sd
- net stop bacula-fd
-) ELSE IF "%1" == "install" (
- bacula-dir /install -c %2\bacula-dir.conf
- bacula-sd /install -c %2\bacula-sd.conf
- bacula-fd /install -c %2\bacula-fd.conf
-) ELSE IF "%1" == "uninstall" (
- bacula-dir /remove
- bacula-sd /remove
- bacula-fd /remove
-)
+++ /dev/null
-@output tmp/dir.out
-status dir
-@output tmp/fd.out
-status client
-@output tmp/sd.out
-status @storage@
-@output
-quit
+++ /dev/null
-REM
-REM Check for zombie jobs (not terminated).
-REM Also scan logs for ERROR messages
-
-sed -e "s;@storage@;%1=%2;" scripts\check_for_zombie_jobs.bscr >tmp\bconcmds
-CALL scripts\functions run_bconsole
-grep "No Jobs running." tmp\dir.out >nul 2>&1
-IF %ERRORLEVEL% NEQ 0 (
- ECHO.
- ECHO !!!! Zombie Jobs in Director !!!!
- ECHO !!!! Zombie Jobs in Director !!!! >>test.out
- ECHO.
-)
-grep "No Jobs running." tmp\fd.out >nul 2>&1
-IF %ERRORLEVEL% NEQ 0 (
- ECHO.
- ECHO !!!! Zombie Jobs in File daemon !!!!
- ECHO !!!! Zombie Jobs in File daemon !!!! >>test.out
- ECHO.
-)
-grep "No Jobs running." tmp\sd.out >nul 2>&1
-IF %ERRORLEVEL% NEQ 0 (
- ECHO.
- ECHO !!!! Zombie Jobs in Storage daemon !!!!
- ECHO !!!! Zombie Jobs in Storage daemon !!!! >>test.out
- ECHO.
-)
-grep "ERROR" tmp/log*.out >nul 2>&1
-IF %ERRORLEVEL% EQU 0 (
- ECHO.
- ECHO !!!! ERROR in log output !!!!
- ECHO !!!! ERROR in log output !!!! >>test.out
- ECHO.
-)
-grep "Fatal Error" tmp\log*.out >nul 2>&1
-IF %ERRORLEVEL% EQU 0 (
- ECHO.
- ECHO !!!! Fatal Error in log output !!!!
- ECHO !!!! Fatal Error in log output !!!! >>test.out
- ECHO.
-)
+++ /dev/null
-REM
-REM Cleanup left over files -- both before and after test run
-REM
-CALL scripts\cleanup
-
-IF NOT "@autochanger@" == "nul" (
- SET slot=0
- FOR /f %%i in ( 'bin\mtx-changer @autochanger@ loaded 0 @tape_drive1@ 1' ) DO SET slot=%%i
- ECHO Slot %slot% in drive 1
- IF !slot! NEQ 0 (
- ECHO unload slot !slot! in drive 1
- bin\mtx-changer @autochanger@ unload !slot! @tape_drive1@ 1
- )
- FOR /f %%i in ( 'bin\mtx-changer @autochanger@ loaded 0 @tape_drive@ 0' ) DO SET slot=%%i
- ECHO Slot !slot! in drive 0
- IF !slot! NEQ 0 (
- echo "unload slot !slot! in drive 0"
- bin\mtx-changer @autochanger@ unload !slot! @tape_drive@ 0
- )
-
- FOR /f %%i in ( 'bin\mtx-changer @autochanger@ loaded 0 @tape_drive1@ 1' ) DO SET slot=%%i
- IF !slot! NEQ 2 (
- ECHO load slot 2 in drive 1
- bin\mtx-changer @autochanger@ load 2 @tape_drive1@ 1
- )
- ECHO WEOF drive 1
- mt -f @tape_drive1@ rewind
- mt -f @tape_drive1@ weof
- ECHO unload slot 2 in drive 1
- bin\mtx-changer @autochanger@ unload 2 @tape_drive1@ 1
-
- FOR /f %%i in ( 'bin\mtx-changer @autochanger@ loaded 0 @tape_drive@ 0' ) DO SET slot=%%i
- ECHO Slot !slot! in drive 0
- IF !slot! NEQ 1 (
- ECHO load slot 1 in drive 0
- bin\mtx-changer @autochanger@ load 1 @tape_drive@ 0
- )
- ECHO WEOF drive 0
- mt -f @tape_drive@ rewind
- mt -f @tape_drive@ weof
- ECHO unload slot 1 from drive 0
- bin\mtx-changer @autochanger@ unload 1 @tape_drive@ 0
-)
+++ /dev/null
-REM
-REM Cleanup left over files -- both before and after test run
-REM
-
-setlocal ENABLEDELAYEDEXPANSION
-
-CALL scripts\cleanup
-
-IF NOT "@autochanger@" == "nul" (
- SET slot=0
- FOR /f %%i in ( 'bin\mtx-changer @autochanger@ loaded 0 dummy 0' ) DO SET slot=%%i
- IF !slot! NEQ 2 (
- bin\mtx-changer @autochanger@ unload 0 @tape_drive@ 0
- bin\mtx-changer @autochanger@ load 2 @tape_drive@ 0
- )
- mt -f @tape_drive@ rewind
- mt -f @tape_drive@ weof
-
- REM
- REM If we have an autochanger always load tape in slot 1
- REM
- FOR /f %%i in ( 'bin\mtx-changer @autochanger@ loaded 0 dummy 0' ) DO SET slot=%%i
- IF !slot! NEQ 1 (
- bin\mtx-changer @autochanger@ unload 0 @tape_drive@ 0
- bin\mtx-changer @autochanger@ load 1 @tape_drive@ 0
- )
-)
-mt -f @tape_drive@ rewind
-mt -f @tape_drive@ weof
+++ /dev/null
-REM
-REM Cleanup left over files -- both before and after test run
-REM
-CALL scripts\cleanup
-
-mt -f @tape_drive@ rewind
-mt -f @tape_drive@ weof
+++ /dev/null
-@ECHO off
-REM
-REM Cleanup left over files -- both before and after test run
-REM
-
-CALL scripts\bacula stop >nul 2>&1
-
-DEL /q /f \tmp\FileVolume* tmp\FileVolume* >nul 2>&1
-DEL /q /f \tmp\TestVolume001 \tmp\Small* >nul 2>&1
-RD /s /q \tmp\bacula-restores tmp\bacula-restores >nul 2>&1
-DEL /q /f tmp\original tmp\Small* tmp\TestVolume* >nul 2>&1
-DEL /q /f tmp\restored tmp\largefile tmp\bscan.bsr tmp\log*.out >nul 2>&1
-DEL /q /f \tmp\sed_tmp \tmp\file-list >nul 2>&1
-RD /s /q tmp\build >nul 2>&1
-DEL /q /f tmp\restore-list tmp\restore2-list >nul 2>&1
-DEL /q /f tmp\fd.out tmp\dir.out tmp\sd.out >nul 2>&1
-DEL /q /f working\log tmp\TEST-* >nul 2>&1
-DEL /q /f working\*.bsr >nul 2>&1
-DEL /q /f tmp\disk-changer.cmd \tmp\disk-changer.cmd >nul 2>&1
-
-CALL bin\drop_bacula_tables >nul 2>&1
-CALL bin\make_bacula_tables >nul 2>&1
-CALL bin\grant_bacula_privileges >nul 2>&1
+++ /dev/null
-REM
-REM Setup for using the Virtual Disk Changer (simulates tape changer)
-REM
-COPY scripts\bacula-dir-tape.conf bin\bacula-dir.conf
-COPY scripts\bacula-sd-2disk.conf bin\bacula-sd.conf
-COPY scripts\test-bacula-fd.conf bin\bacula-fd.conf
-COPY scripts\test-console.conf bin\bconsole.conf
-COPY bin\bacula-dir.conf tmp\1
-bin\sed -e "s;# Autochanger = yes; Autochanger = yes;g" tmp\1 >bin\bacula-dir.conf
+++ /dev/null
-COPY scripts\bacula-dir-tape.conf bin\bacula-dir.conf
-COPY scripts\bacula-sd-2disk-drive.conf bin\bacula-sd.conf
-COPY scripts\test-bacula-fd.conf bin\bacula-fd.conf
-COPY scripts\test-console.conf bin\bconsole.conf
-COPY bin\bacula-dir.conf tmp\1
-bin\sed -e "s;# Autochanger = yes; Autochanger = yes;g" tmp\1 >bin\bacula-dir.conf
+++ /dev/null
-COPY scripts\bacula-dir-tape.conf bin\bacula-dir.conf
-COPY scripts\bacula-sd-2drive.conf bin\bacula-sd.conf
-COPY scripts\test-bacula-fd.conf bin\bacula-fd.conf
-COPY scripts\test-console.conf bin\bconsole.conf
-
-COPY bin\bacula-dir.conf tmp\1
-bin\sed -e "s;# Autochanger = yes; Autochanger = yes;g" >bin\bacula-dir.conf
-
-REM get proper SD tape definitions
-COPY scripts\win32_tape_options bin\tape_options
+++ /dev/null
-COPY scripts\bacula-dir-tape.conf bin\bacula-dir.conf
-COPY scripts\bacula-sd-2tape.conf bin\bacula-sd.conf
-COPY scripts\test-bacula-fd.conf bin\bacula-fd.conf
-COPY scripts\test-console.conf bin\bconsole.conf
-
-COPY bin\bacula-dir.conf tmp\1
-bin\sed -e "s;# Autochanger = yes; Autochanger = yes;g" tmp\1 >bin\bacula-dir.conf
-
-REM get proper SD tape definitions
-COPY scripts\win32_tape_options bin\tape_options
+++ /dev/null
-COPY scripts\bacula-dir.conf bin\bacula-dir.conf
-COPY scripts\bacula-sd.conf bin\bacula-sd.conf
-COPY scripts\bacula-fd.conf bin\bacula-fd.conf
-COPY scripts\bconsole.conf bin\bconsole.conf
-
-REM get proper SD tape definitions
-COPY scripts\win32_tape_options bin\tape_options
+++ /dev/null
-COPY scripts\new-test-bacula-dir.conf bin\bacula-dir.conf
-COPY scripts\test-bacula-sd.conf bin\bacula-sd.conf
-COPY scripts\crypto-bacula-fd.conf bin\bacula-fd.conf
-COPY scripts\test-console.conf bin\bconsole.conf
-COPY scripts\cryptokeypair.pem bin\cryptokeypair.pem
+++ /dev/null
-REM
-REM Setup for migration tests
-REM
-COPY scripts\bacula-dir-migration.conf bin\bacula-dir.conf
-COPY scripts\bacula-sd-migration.conf bin\bacula-sd.conf
-COPY scripts\test-bacula-fd.conf bin\bacula-fd.conf
-COPY scripts\test-console.conf bin\bconsole.conf
+++ /dev/null
-copy scripts\bacula-dir-tape.conf bin\bacula-dir.conf
-copy scripts\bacula-sd-tape.conf bin\bacula-sd.conf
-copy scripts\test-bacula-fd.conf bin\bacula-fd.conf
-copy scripts\test-console.conf bin\bconsole.conf
-
-REM get proper SD tape definitions
-copy scripts\win32_tape_options bin\tape_options
+++ /dev/null
-COPY scripts\new-test-bacula-dir.conf bin\bacula-dir.conf
-COPY scripts\test-bacula-sd.conf bin\bacula-sd.conf
-COPY scripts\test-bacula-fd.conf bin\bacula-fd.conf
-COPY scripts\test-console.conf bin\bconsole.conf
-
-REM get proper SD tape definitions
-COPY scripts\win32_tape_options bin\tape_options
+++ /dev/null
-COPY scripts\testa-bacula-dir.conf bin\bacula-dir.conf
-COPY scripts\test-bacula-sd.conf bin\bacula-sd.conf
-COPY scripts\test-bacula-fd.conf bin\bacula-fd.conf
-COPY scripts\test-console.conf bin\bconsole.conf
-
-REM get proper SD tape definitions
-COPY scripts\win32_tape_options bin\tape_options
+++ /dev/null
-COPY scripts\win32-bacula-dir-tape.conf bin\bacula-dir.conf
-COPY scripts\win32-bacula-sd-tape.conf bin\bacula-sd.conf
-COPY scripts\win32-bacula-fd.conf bin\bacula-fd.conf
-COPY scripts\test-console.conf bin\bconsole.conf
-
-REM get proper SD tape definitions
-COPY scripts\win32_tape_options bin\tape_options
+++ /dev/null
-#
-# Default Bacula File Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# There is not much to change here except perhaps the
-# File daemon Name to
-#
-
-#
-# List Directors who are permitted to contact this File daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc"
-}
-
-#
-# "Global" File daemon configuration specifications
-#
-FileDaemon { # this is me
- Name = @hostname@-fd
- FDport = 8102 # where we listen for the director
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- SubSys Directory = "@subsysdir@"
- PKI Signatures = Yes
- PKI Encryption = Yes
- PKI Keypair = "@scriptdir@/cryptokeypair.pem"
-}
-
-# Send all messages except skipped files back to Director
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
------BEGIN RSA PRIVATE KEY-----
-MIIBOgIBAAJBAKIc649Amif6weq+c8rVtS7jyn7E9oZ9Irrl9WviQZi0+J2OLgCi
-PNaj/FzPhTIgBBRFEP0ZU5DfVv6CoXKbpr8CAwEAAQJAQbvUUFvzpi5pnxPmw+Jv
-+zlmjIy1Icdv47UHFN3Dl3V0+X05g12xUlnyNKzo2jlSwkBi1w8AJCMV6/TnnLiI
-AQIhAM4SH9cb01DUH+1O5gk90GgNYW1Aq2vL1vygm02kppi/AiEAyWQ9eAILPXhX
-H3a7mEj8z1bCTBiVrhe73NUjim4QcgECIEC3hHRj8ruBwv0eODRSy27CNQTAuJVE
-ESKJtfxuZzu1AiEAotXYFbahW/x3hUs9d25ca1EdHOYr8G3kSjRT3lQMHAECIHBl
-uX+Ywc1jjWhc+vN2ZrLWkKMVbrd+SWOPUQGroM0j
------END RSA PRIVATE KEY-----
------BEGIN CERTIFICATE-----
-MIICKzCCAdWgAwIBAgIJAO4x/m+tHX8HMA0GCSqGSIb3DQEBBQUAMEUxCzAJBgNV
-BAYTAkFVMRMwEQYDVQQIEwpTb21lLVN0YXRlMSEwHwYDVQQKExhJbnRlcm5ldCBX
-aWRnaXRzIFB0eSBMdGQwHhcNMDYxMjA0MDMxMzUwWhcNMDcwMTAzMDMxMzUwWjBF
-MQswCQYDVQQGEwJBVTETMBEGA1UECBMKU29tZS1TdGF0ZTEhMB8GA1UEChMYSW50
-ZXJuZXQgV2lkZ2l0cyBQdHkgTHRkMFwwDQYJKoZIhvcNAQEBBQADSwAwSAJBAKIc
-649Amif6weq+c8rVtS7jyn7E9oZ9Irrl9WviQZi0+J2OLgCiPNaj/FzPhTIgBBRF
-EP0ZU5DfVv6CoXKbpr8CAwEAAaOBpzCBpDAdBgNVHQ4EFgQUiGz2I+bks0nCHyCI
-IwuV3DpDPMwwdQYDVR0jBG4wbIAUiGz2I+bks0nCHyCIIwuV3DpDPMyhSaRHMEUx
-CzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpTb21lLVN0YXRlMSEwHwYDVQQKExhJbnRl
-cm5ldCBXaWRnaXRzIFB0eSBMdGSCCQDuMf5vrR1/BzAMBgNVHRMEBTADAQH/MA0G
-CSqGSIb3DQEBBQUAA0EAkjFYcs9rrpdURlBaNlbud68VlA5rU+Bv4keYx41DUmqo
-sXtkQZENR9iYYYhOUso1/1dwQgrt3egjTZTtq7o5zw==
------END CERTIFICATE-----
+++ /dev/null
-@ECHO off
-setlocal ENABLEDELAYEDEXPANSION
-REM
-REM
-REM Bacula interface to virtual autoloader using disk storage
-REM
-REM $Id$
-REM
-REM If you set in your Device resource
-REM
-REM Changer Command = "disk-changer %c %o %S %a %d"
-REM you will have the following input to this script:
-REM
-REM So Bacula will always call with all the following arguments, even though
-REM in some cases, not all are used.
-REM
-REM disk-changer "changer-device" "command" "slot" "archive-device" "drive-index"
-REM %1 %2 %3 %4 %5
-REM
-REM By default the autochanger has 10 Volumes and 1 Drive.
-REM
-REM Note: For this script to work, you *must" specify
-REM Device Type = File
-REM in each of the Devices associated with your AutoChanger resource.
-REM
-REM changer-device is the name of a file that overrides the default
-REM volumes and drives. It may have:
-REM maxslot=n where n is one based (default 10)
-REM maxdrive=m where m is zero based (default 1 -- i.e. 2 drives)
-REM
-REM This code can also simulate barcodes. You simply put
-REM a list of the slots and barcodes in the "base" directory/barcodes.
-REM See below for the base directory definition. Example of a
-REM barcodes file:
-REM C:\TEMP\bacula\barcodes
-REM 1:Vol001
-REM 2:Vol002
-REM ...
-REM
-REM archive-device is the name of the base directory where you want the
-REM Volumes stored appended with \drive0 for the first drive; \drive1
-REM for the second drive, ... For example, you might use
-REM C:\Temp\bacula\drive0 Note: you must not have a trailing slash, and
-REM the string (e.g. \drive0) must be unique, and it must not match
-REM any other part of the directory name. These restrictions could be
-REM easily removed by any clever script jockey.
-REM
-REM Full example: disk-changer C:\Temp\bacula\conf load 1 C:\Temp\bacula\drive0 0
-REM
-REM The Volumes will be created with names slot1, slot2, slot3, ... maxslot in the
-REM base directory. In the above example the base directory is C:\Temp\bacula.
-REM However, as with tapes, their Bacula Volume names will be stored inside the
-REM Volume label. In addition to the Volumes (e.g. C:\Temp\bacula\slot1,
-REM C:\Temp\bacula\slot3, ...) this script will create a C:\Temp\bacula\loadedn
-REM file to keep track of what Slot is loaded. You should not change this file.
-REM
-
-SET dbgfile=%CD%\disk-changer.log
-
-REM to turn on logging, uncomment the following line
-IF NOT EXIST %dbgfile% COPY nul %dbgfile% >nul
-
-REM
-REM check parameter count on commandline
-REM
-REM Check for special cases where only 2 arguments are needed,
-REM all others are a minimum of 5
-REM
-IF "%1" EQU "" goto :param_count_invalid
-IF "%2" EQU "" goto :param_count_invalid
-IF "%2" EQU "list" goto :param_count_valid
-IF "%2" EQU "slots" goto :param_count_valid
-IF "%3" EQU "" goto :param_count_invalid
-IF "%4" EQU "" goto :param_count_invalid
-IF "%5" EQU "" goto :param_count_invalid
-GOTO :param_count_valid
-
-:param_count_invalid
- echo Insufficient number of arguments given.
- IF "%2" EQU "" (
- echo At least two arguments must be specified.
- ) else echo Command expected 5 arguments.
-:usage
- ECHO.
- ECHO usage: disk-changer ctl-device command [slot archive-device drive-index]
- ECHO Valid commands are: unload, load, list, loaded, and slots.
- EXIT /B 1
-
-:param_count_valid
-
-REM Setup arguments
-SET ctl=%1
-SET cmd=%2
-SET slot=%3
-SET device=%4
-SET drive=%5
-
-REM set defaults
-SET maxdrive=1
-SET maxslot=10
-
-SET ctl=%ctl:/=\%
-SET ctl=%ctl:\\=\%
-
-SET device=%device:/=\%
-SET device=%device:\\=\%
-
-REM Pull in conf file
-IF EXIST %ctl% CALL %ctl%
-
-FOR %%i IN ( %ctl% ) DO SET dirname=%%~dpi
-IF NOT EXIST %dirname%nul (
- ECHO ERROR: Autochanger directory "%dirname%" does not exist.
- ECHO You must create it.
- EXIT /b 1
-)
-
-CALL :debug "Parms: %ctl% %cmd% %slot% %device% %drive%"
-IF "%cmd%" EQU "unload" GOTO :cmdUnload
-IF "%cmd%" EQU "load" GOTO :cmdLoad
-IF "%cmd%" EQU "list" GOTO :cmdList
-IF "%cmd%" EQU "loaded" GOTO :cmdLoaded
-IF "%cmd%" EQU "slots" GOTO :cmdSlots
-GOTO :cmdUnknown
-
-:cmdUnload
- CALL :debug "Doing disk -f %ctl% unload %slot% %device% %drive%"
- IF NOT EXIST %dirname%loaded%drive% ECHO 0 >%dirname%loaded%drive%
- FOR /f %%i IN ( %dirname%loaded%drive% ) DO SET ld=%%i
-
- IF "%slot%" EQU "%ld%" (
- CALL :debug "Unloaded slot %ld% from drive %drive%"
- ECHO 0 >%dirname%loaded%drive%
- DEL %dirname%%device% >nul 2>nul
- SET rtn=0
- ) ELSE (
- ECHO Storage Element %slot% is Already Full
- CALL :debug "Storage Element %slot% is Already Full"
- SET rtn=1
- )
- GOTO :cmdExit
-
-:cmdLoad
- CALL :debug "Doing disk -f %ctl% load %slot% %device% %drive%"
- SET ld=0
- IF NOT EXIST %dirname%loaded%drive% ECHO 0 >%dirname%loaded%drive%
- FOR /f %%i IN ( %dirname%loaded%drive% ) DO SET ld=%%i
- IF %ld% EQU 0 (
- IF NOT EXIST %dirname%slot%slot% COPY nul %dirname%slot%slot% >nul
- DEL %device%
- fsutil hardlink create %device% %dirname%slot%slot% >nul 2>&1
- SET rtn=%ERRORLEVEL%
- IF !rtn! EQU 0 (
- ECHO %slot% >%dirname%loaded%drive%
- CALL :debug "Loaded slot %slot% into drive %drive%"
- ) ELSE (
- CALL :debug "Create hardlink failed, return = !rtn!"
- )
- ) ELSE (
- ECHO Drive %drive% Full - Storage element %ld% loaded
- CALL :debug "Drive %drive% Full - Storage element %ld% loaded"
- )
- GOTO :cmdExit
-
-:cmdList
- CALL :debug "Doing disk -f %ctl% -- to list volumes"
- IF EXIST %dirname%barcodes (
- TYPE %dirname%barcodes
- ) ELSE (
- FOR /l %%i IN ( 1, 1, %maxslot% ) DO ECHO %%i:
- )
- SET rtn=0
- GOTO :cmdExit
-
-:cmdLoaded
- CALL :debug "Doing disk -f %ctl% %drive% -- to find what is loaded"
- IF EXIST %dirname%loaded%drive% ( TYPE %dirname%loaded%drive% ) ELSE ECHO 0
- SET rtn=0
- GOTO :cmdExit
-
-:cmdSlots
- CALL :debug "Doing disk -f %ctl% -- to get count of slots"
- ECHO %maxslot%
- SET rtn=0
- GOTO :cmdExit
-
-:cmdExit
- EXIT /b %rtn%
-
-:cmdUnknown
- ECHO '%cmd%' is an invalid command.
- GOTO :usage
-
-REM
-REM log whats done
-REM
-:debug
- IF NOT EXIST %dbgfile% GOTO :EOF
- FOR /f "usebackq tokens=2-4,5-7 delims=/:. " %%i IN ( '%DATE% %TIME%' ) do SET TIMESTAMP=%%k%%i%%j-%%l:%%m:%%n
- ECHO %TIMESTAMP% %* >> %dbgfile%
- GOTO :EOF
+++ /dev/null
-IF "%1" == "" GOTO :usage
-IF "%2" == "" GOTO :usage
-IF "%3" == "" GOTO :usage
-IF "%4" == "" GOTO :usage
-IF "%5" == "" GOTO :usage
-IF "%6" == "" GOTO :usage
-GOTO :args_ok
-
-:usage
-ECHO First arg must be email name
-ECHO and the second must be the smtp or email host
-ECHO and the third must be a tape drive
-ECHO and the fourth must be a tape control name or nul
-ECHO and the fifth must be the full path to the mtx program
-ECHO and the sixth must be tape drive 1 or nul
-EXIT /b 1
-
-:args_ok
-SET out=tmp\sed_tmp
-
-REM Create sed command script
-
-ECHO s;@sbindir@;%CD:\=/%/bin;g >%out%
-ECHO s;@scriptdir@;%CD:\=/%/scripts;g >>%out%
-ECHO s;@working_dir@;%CD:\=/%/working;g >>%out%
-ECHO s;@piddir@;%CD:\=/%/working;g >>%out%
-ECHO s;@subsysdir@;%CD:\=/%/working;g >>%out%
-ECHO s;@job_email@;%1;g >>%out%
-ECHO s;@smtp_host@;%2;g >>%out%
-ECHO s;@tape_drive@;%3;g >>%out%
-ECHO s;@autochanger@;%4;g >>%out%
-ECHO s;@tmpdir@;%CD:\=/%/tmp;g >>%out%
-ECHO s;@hostname@;localhost;g >>%out%
-ECHO s;@changer_path@;%5;g >>%out%
-ECHO s;@tape_drive1@;%6;g >>%out%
-ECHO s;@disk_drive@;%CD:\=/%/tmp/disk-changer;g >>%out%
-ECHO s;@smtp_program@;%CD:\=/%/bin/bsmtp;g >>%out%
-
-ECHO SET AUTOCHANGER=%4 >config_out.cmd
-ECHO SET AUTOCHANGER_PATH=%5 >>config_out.cmd
-ECHO SET TAPE_DRIVE1=%6 >>config_out.cmd
-
-REM process .in files with sed script
-sed -f %out% %CD%\scripts\test-bacula-dir.conf.in >%CD%\scripts\test-bacula-dir.conf
-sed -f %out% %CD%\scripts\new-test-bacula-dir.conf.in >%CD%\scripts\new-test-bacula-dir.conf
-sed -f %out% %CD%\scripts\testa-bacula-dir.conf.in >%CD%\scripts\testa-bacula-dir.conf
-sed -f %out% %CD%\scripts\test-bacula-fd.conf.in >%CD%\scripts\test-bacula-fd.conf
-sed -f %out% %CD%\scripts\test-bacula-sd.conf.in >%CD%\scripts\test-bacula-sd.conf
-sed -f %out% %CD%\scripts\test-console.conf.in >%CD%\scripts\test-console.conf
-sed -f %out% %CD%\scripts\crypto-bacula-fd.conf.in >%CD%\scripts\crypto-bacula-fd.conf
-sed -f %out% %CD%\scripts\bacula-dir-tape.conf.in >%CD%\scripts\bacula-dir-tape.conf
-sed -f %out% %CD%\scripts\bacula-dir-migration.conf.in >%CD%\scripts\bacula-dir-migration.conf
-sed -f %out% %CD%\scripts\win32-bacula-dir-tape.conf.in >%CD%\scripts\win32-bacula-dir-tape.conf
-sed -f %out% %CD%\scripts\bacula-sd-tape.conf.in >%CD%\scripts\bacula-sd-tape.conf
-sed -f %out% %CD%\scripts\bacula-sd-2tape.conf.in >%CD%\scripts\bacula-sd-2tape.conf
-sed -f %out% %CD%\scripts\bacula-sd-migration.conf.in >%CD%\scripts\bacula-sd-migration.conf
-sed -f %out% %CD%\scripts\bacula-sd-2disk.conf.in >%CD%\scripts\bacula-sd-2disk.conf
-sed -f %out% %CD%\scripts\bacula-sd-2drive.conf.in >%CD%\scripts\bacula-sd-2drive.conf
-sed -f %out% %CD%\scripts\bacula-sd-2disk-drive.conf.in >%CD%\scripts\bacula-sd-2disk-drive.conf
-sed -f %out% %CD%\scripts\cleanup-tape.cmd.in >%CD%\scripts\cleanup-tape.cmd
-sed -f %out% %CD%\scripts\cleanup-2tape.cmd.in >%CD%\scripts\cleanup-2tape.cmd
-sed -f %out% %CD%\scripts\cleanup-2drive.cmd.in >%CD%\scripts\cleanup-2drive.cmd
-sed -f %out% %CD%\scripts\prepare-two-tapes.cmd.in >%CD%\scripts\prepare-two-tapes.cmd
-sed -f %out% %CD%\scripts\bacula-dir.conf.testrunscript.in >%CD%\scripts\bacula-dir.conf.testrunscript
-
-COPY %CD%\bin\bacula-sd.conf tmp\bacula-sd.tmp >nul
-sed -e "s;C:\\Temp;%CD:\=/%/tmp;g" tmp\bacula-sd.tmp >%CD%\bin\bacula-sd.conf
-
-REM get proper SD tape definitions
-COPY %CD%\scripts\win32_tape_options %CD%\bin\tape_options >nul
-
-DEL %out%
-DEL tmp\*.tmp
+++ /dev/null
-dev/ptmx
-dev/pts
-dev/rd/c5d2
-dev/rd
-dev/shm
+++ /dev/null
-etc/mail/statistics
+++ /dev/null
-lib/ld-2.2.5.so
-lib/libtermcap.so.2.0.8
-lib/libc-2.2.5.so
-lib/libnsl-2.2.5.so
-lib/libnss_files-2.2.5.so
+++ /dev/null
-/build/configure
-/build/src/stored/bextract
-/build/src/tools/testfind
-/build/Makefile.in
-/build/src/dird/bacula-dir
-/build/src/console/bconsole
-/build/src/filed/bacula-fd
-/build/src/findlib/find_one.c
-/build/src/jcr.h
-/build/platforms/Makefile.in
-/build/platforms/redhat/Makefile.in
-/build/scripts/Makefile.in
-/build/src/win32/filed/winservice.cpp
-/build/src/filed/restore.c
-/build/autoconf/configure.in
-/build/examples/afs-bacula
-/build/src/win32/Makefile.inc.in
-/build/src/win32/installer/winbacula.nsi
-/build/autoconf/configure.in
-/build/src/version.h
-/build/src/lib/message.c
-/build/src/lib/bnet_server.c
-/build/src/lib/libbac.a
+++ /dev/null
-REM
-REM A set of useful functions to be sourced in each test
-REM
-
-SET routine=%1
-SHIFT
-
-GOTO %routine%
-
-:start_test
- ECHO.
- ECHO.
- ECHO === Starting %TestName% at %TIME% ===
- ECHO === Starting %TestName% at %TIME% === >>working\log
- ECHO.
- GOTO :EOF
-
-:set_debug
- SET debug=%1
- IF "%debug%" EQU 1 (
- SET out=tee
- ) ELSE (
- SET out=output
- )
- GOTO :EOF
-
-:run_bacula
- IF %debug% EQU 1 (
- CALL scripts\bacula start
- bin\bconsole -c bin\bconsole.conf <tmp\bconcmds
- ) ELSE (
- CALL scripts\bacula start >nul 2>&1
- bin\bconsole -c bin\bconsole.conf <tmp\bconcmds >nul 2>&1
- )
- GOTO :EOF
-
-:run_bconsole
- IF %debug% EQU 1 (
- bin\bconsole -c bin\bconsole.conf <tmp\bconcmds
- ) ELSE (
- bin\bconsole -c bin\bconsole.conf <tmp\bconcmds >nul 2>&1
- )
- GOTO :EOF
-
-:run_btape
- IF %debug% EQU 1 (
- bin\btape -c bin\bacula-sd.conf DDS-4 <tmp\bconcmds | tee tmp\log1.out
- ) ELSE (
- bin\btape -c bin\bacula-sd.conf DDS-4 <tmp\bconcmds >tmp\log1.out 2>&1
- )
- GOTO :EOF
-
-:run_bscan
- IF %debug% EQU 1 (
- bin\bscan %1 %2 %3 %4 %5 %6 %7 %8 %9 | tools\tee tmp\log.out
- ) ELSE (
- bin\bscan %1 %2 %3 %4 %5 %6 %7 %8 %9 >nul 2>&1
- )
- GOTO :EOF
-
-:stop_bacula
- CALL scripts\bacula stop >nul 2>&1
- GOTO :EOF
-
-:check_for_zombie_jobs
- CALL scripts\check_for_zombie_jobs %1 %2
- GOTO :EOF
-
-:change_jobname
- IF "%2" == "" (
- SET oldname=NightlySave
- SET newname=%1
- ) ELSE (
- SET oldname=%1
- SET newname=%2
- )
- IF EXIST bin\1 DEL /f bin\1
- REN bin\bacula-dir.conf 1
- bin\sed -e "s;%oldname%;%newname%;g" bin\1 >bin\bacula-dir.conf
-REM ECHO Job %oldname% changed to %newname%
- GOTO :EOF
-
-:check_two_logs
- tools\grep "^ Termination: *Backup OK" tmp\log1.out >nul 2>&1
- SET bstat=%ERRORLEVEL%
- tools\grep "^ Termination: *Restore OK" tmp\log2.out >nul 2>&1
- SET rstat=%ERRORLEVEL%
- GOTO :EOF
-
-:check_restore_diff
- tools\diff -r build tmp\bacula-restores\%CD::=%\build >nul 2>&1
- SET dstat=%ERRORLEVEL%
- GOTO :EOF
-
-:check_restore_tmp_build_diff
- tools\diff -r tmp\build tmp\bacula-restores\%CD::=%\tmp\build >nul 2>&1
- SET dstat=%ERRORLEVEL%
- GOTO :EOF
-
-:end_test
- SET /a errcount=%bstat% + %rstat% + %dstat%
- IF %errcount% NEQ 0 (
- ECHO.
- ECHO.
- ECHO !!!!! %TestName% Bacula source failed!!! !!!!!
- ECHO !!!!! %TestName% failed!!! !!!!! >>test.out
- IF %dstat% NEQ 0 (
- ECHO !!!!! Restored files differ !!!!!
- ECHO !!!!! Restored files differ !!!!! >>test.out
- ) ELSE (
- ECHO !!!!! Bad Job termination status !!!!!
- ECHO !!!!! Bad Job termination status !!!!! >>test.out
- )
- ECHO.
- ) ELSE (
- ECHO ===== %TestName% Bacula source OK %TIME% =====
- ECHO ===== %TestName% OK %TIME% ===== >>test.out
- IF %debug% EQU 0 scripts\cleanup
- )
- SET errcount=
- GOTO :EOF
-
-:copy_tape_confs
- CALL scripts\copy-tape-confs >nul 2>&1
- CALL scripts\cleanup-tape
- GOTO :EOF
-
-:copy_test_confs
- CALL scripts\copy-test-confs >nul 2>&1
- CALL scripts\cleanup
- GOTO :EOF
+++ /dev/null
-REM Arguments:
-REM 1 = Debug or Release
-REM 2 = email address
-REM 3 = mail server
-REM 4 = tape device
-REM 5 = changer device or nul
-REM 6 = tape1 device or nul
-
-SETLOCAL ENABLEDELAYEDEXPANSION
-
-SET CATS=create_sqlite3_database.cmd drop_sqlite3_database.cmd drop_sqlite3_tables.cmd grant_sqlite3_privileges.cmd make_sqlite3_catalog_backup.cmd make_sqlite3_tables.cmd
-
-SET CONFS=bacula-dir.conf.in bacula-fd.conf.in bacula-sd.conf.in bconsole.conf.in
-
-CALL scripts\bacula stop
-
-IF NOT EXIST bin MKDIR bin
-
-COPY build\src\win32\installer\%1\*.exe bin >nul
-COPY build\src\win32\installer\%1\*.dll bin >nul
-COPY build\src\win32\installer\%1\*.manifest bin >nul
-COPY build\src\win32\%1\*.pdb bin >nul
-COPY build\src\win32\installer\%1\query.sql bin >nul
-
-COPY bin\cats_sqlite.dll bin\bacula_cats.dll >nul
-
-FOR /f %%i IN ( 'cmd /c openssl.exe rand -base64 33 2^>nul' ) DO SET CLIENT_PASSWORD=%%i
-FOR /f %%i IN ( 'cmd /c openssl.exe rand -base64 33 2^>nul' ) DO SET STORAGE_PASSWORD=%%i
-FOR /f %%i IN ( 'cmd /c openssl.exe rand -base64 33 2^>nul' ) DO SET DIRECTOR_PASSWORD=%%i
-FOR /f %%i IN ( 'cmd /c openssl.exe rand -base64 33 2^>nul' ) DO SET MONITOR_PASSWORD=%%i
-
-ECHO s;@director_name@;localhost-dir;g >install.sed
-ECHO s;@director_port@;8101;g >>install.sed
-ECHO s;@storage_name@;localhost-sd;g >>install.sed
-ECHO s;@storage_port@;8103;g >>install.sed
-ECHO s;@client_name@;localhost-fd;g >>install.sed
-ECHO s;@client_port@;8102;g >>install.sed
-
-REM ECHO s;@DISTVER@;$R2;
-
-ECHO s;@working_dir@;%CD:\=\\\\%\\\\working;g >>install.sed
-ECHO s;@working_dir_cmd@;%CD:\=\\%\\working;g >>install.sed
-ECHO s;@bin_dir@;%CD:\=\\\\%\\\\bin;g >>install.sed;
-ECHO s;@bin_dir_cmd@;%CD:\=\\%\\bin;g >>install.sed
-ECHO s;@BUILD_DIR@;%CD:\=/%/build;g >>install.sed
-ECHO s;@director_address@;localhost;g >>install.sed
-ECHO s;@client_address@;localhost;g >>install.sed
-ECHO s;@storage_address@;localhost;g >>install.sed
-ECHO s;@client_maxjobs@;2;g >>install.sed
-ECHO s;@client_password@;%CLIENT_PASSWORD%;g >>install.sed
-ECHO s;@storage_maxjobs@;10;g >>install.sed
-ECHO s;@storage_password@;%STORAGE_PASSWORD%;g >>install.sed
-ECHO s;@director_maxjobs@;1;g >>install.sed
-ECHO s;@director_password@;%DIRECTOR_PASSWORD%;g >>install.sed
-ECHO s;@job_email@;%2;g >>install.sed
-ECHO s;@smtp_host@;%3;g >>install.sed
-ECHO s;@monitor_name@;localhost-mon;g >>install.sed
-ECHO s;@monitor_password@;%MONITOR_PASSWORD%;g >>install.sed
-ECHO s;@tape_drive@;%4;g >>install.sed
-ECHO s;@autochanger@;%5;g >>install.sed
-ECHO s;@changer_path@;%6;g >>install.sed
-ECHO s;@tape_drive1@;%7;g >>install.sed
-
-FOR %%i in ( %CATS% ) DO (
- SET NAME=%%i
- SET TARGET=bin\!NAME:sqlite3=bacula!
- tools\sed -f install.sed build\src\win32\installer\%1\!NAME! > !TARGET!
-)
-
-FOR %%i in ( %CONFS% ) DO tools\sed -f install.sed build\src\win32\installer\%%i > bin\%%~ni
-
-tools\sed -f install.sed build\src\win32\installer\%1\make_sqlite3_tables.sql > bin\make_sqlite3_tables.sql
-tools\sed -f install.sed build\src\win32\installer\%1\mtx-changer.cmd > bin\mtx-changer.cmd
-
-CALL scripts\bacula uninstall
-CALL scripts\bacula install %CD%\bin
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.39 or later
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- SubSysDirectory = "@subsysdir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3" # Console password
- Messages = Standard
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData=yes
-}
-
-Job {
- Name = "Crypto"
- Type = Backup
- Client=@hostname@-fd
- FileSet="SparseCompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData=yes
-}
-
-
-Job {
- Name = "MonsterSave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File1
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-Job {
- Name = "VerifyVolume"
- Type = Verify
- Level = VolumeToCatalog
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-Job {
- Name = "SparseTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="SparseSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-Job {
- Name = "CompressedTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="CompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Maximum Concurrent Jobs = 4
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-Job {
- Name = "SparseCompressedTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="SparseCompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-# Backup the catalog database (after the nightly save)
-Job {
- Name = "BackupCatalog"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Catalog"
-# Schedule = "WeeklyCycleAfterBackup"
- Storage = File
- Messages = Standard
- Pool = Default
- # This creates an ASCII copy of the catalog
- RunBeforeJob = "@sbindir@/make_catalog_backup -u bacula"
- # This deletes the copy of the catalog
- RunAfterJob = "@sbindir@/delete_catalog_backup"
- Write Bootstrap = "@working_dir@/BackupCatalog.bsr"
-}
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include { Options { signature=MD5 }
- File = </tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseSet"
- Include {
- Options {
- signature=MD5 sparse=yes
- }
- File = </tmp/file-list
- }
-}
-
-FileSet {
- Name = "CompressedSet"
- Include {
- Options {
- signature=MD5 compression=GZIP
- }
- File = </tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseCompressedSet"
- Include {
- Options {
- signature=MD5 compression=GZIP
- sparse=yes
- }
- File = </tmp/file-list
- }
-}
-
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# This schedule does the catalog. It starts after the WeeklyCycle
-Schedule {
- Name = "WeeklyCycleAfterBackup"
- Run = Full sun-sat at 1:10
-}
-
-# This is the backup of the catalog
-FileSet {
- Name = "Catalog"
- Include {
- Options {
- signature=MD5
- }
- File = /home/kern/bacula/regress/bin/working/bacula.sql
- }
-}
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definiton of file storage device
-Storage {
- Name = File
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage
- Media Type = File
- Maximum Concurrent Jobs = 4
-}
-
-Storage {
- Name = File1
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage1
- Media Type = File1
- Maximum Concurrent Jobs = 4
-}
-
-
-# Definition of DLT tape storage device
-#Storage {
-# Name = DLTDrive
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = "HP DLT 80" # must be same as Device in Storage daemon
-# Media Type = DLT8000 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of DDS tape storage device
-#Storage {
-# Name = SDT-10000
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = SDT-10000 # must be same as Device in Storage daemon
-# Media Type = DDS-4 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of 8mm tape storage device
-#Storage {
-# Name = "8mmDrive"
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-# Device = "Exabyte 8mm"
-# MediaType = "8mm"
-#}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-Messages {
- Name = NoEmail
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- console = all, !skipped, !terminate
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-# Label Format = "TEST-${Year}-${Month:p/2/0/r}-${Day:p/2/0/r}:${NumVols}"
-}
+++ /dev/null
-REM
-REM Create fresh virtual disk changer directory
-REM
-RD /s /q tmp\disk-changer >nul 2>&1
-MKDIR tmp\disk-changer
+++ /dev/null
-REM
-REM Create two blank tapes
-REM
-REM mt -f @tape_drive@ offline
-@changer_path@ -f @autochanger@ unload
-@changer_path@ -f @autochanger@ load 1
-mt -f @tape_drive@ rewind
-mt -f @tape_drive@ weof
-@changer_path@ -f @autochanger@ unload
-@changer_path@ -f @autochanger@ load 2
-mt -f @tape_drive@ rewind
-mt -f @tape_drive@ weof
-REM @changer_path@ -f @autochanger@ unload
+++ /dev/null
-REM
-REM Script to setup running Bacula regression tests
-REM
-
-IF "%1" == "" GOTO :usage
-IF "%2" == "" GOTO :usage
-IF "%3" == "" GOTO :usage
-IF "%4" == "" GOTO :usage
-IF "%5" == "" GOTO :usage
-IF "%6" == "" GOTO :usage
-IF "%7" == "" GOTO :usage
-GOTO :param_count_ok
-
-:usage
-ECHO Incorrect number of arguments.
-ECHO setup bacula-src build-type email-address smtp-host tape-device changer-device tape1-device
-ECHO.
-EXIT /b 1
-
-:param_count_ok
-RD /s /q build bin tmp working >nul 2>&1
-MKDIR tmp
-
-REM Copy new source
-ECHO Copying source from %1
-SET SRC=%1
-FOR /r %1 %%i in ( debug release ) do IF EXIST %%i ECHO %%i | sed -e "s;%SRC:\=\\%\\;;" -e "/installer\\%2/d" -e "/win32\\%2/d" >>tmp\exclude_list
-ECHO .bsc >>tmp\exclude_list
-ECHO .ncb >>tmp\exclude_list
-
-XCOPY %1 build\ /EXCLUDE:tmp\exclude_list /e /q
-
-DEL build\src\win32\%2\winbacula*.exe
-
-CALL scripts\install_bacula %2 %3 %4 %5 %6 %7
-
-CALL scripts\bacula stop >nul 2>&1
-
-IF NOT EXIST working MKDIR working
-ECHO Running database creation scripts
-CALL bin\create_bacula_database
-CALL bin\drop_bacula_tables
-CALL bin\make_bacula_tables
-CALL bin\grant_bacula_privileges
-
-REM Start and stop Bacula to ensure conf files are OK
-
-CALL scripts\bacula start
-CALL scripts\bacula stop >nul 2>&1
-
-REM
-REM Save Bacula default conf files for later use
-REM
-COPY bin\*.conf scripts >nul
-GOTO :EOF
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.33
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- SubSysDirectory = "@subsysdir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3" # Console password
- Messages = Daemon
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData=yes
-}
-
-Job {
- Name = "MonsterSave"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File1
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-Job {
- Name = "VerifyVolume"
- Type = Verify
- Level = VolumeToCatalog
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-Job {
- Name = "SparseTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="SparseSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-Job {
- Name = "CompressedTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="CompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Maximum Concurrent Jobs = 4
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-# Max Run Time = 15 seconds
-}
-
-Job {
- Name = "SparseCompressedTest"
- Type = Backup
- Client=@hostname@-fd
- FileSet="SparseCompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-# Backup the catalog database (after the nightly save)
-Job {
- Name = "BackupCatalog"
- Type = Backup
- Client=@hostname@-fd
- FileSet="Catalog"
-# Schedule = "WeeklyCycleAfterBackup"
- Storage = File
- Messages = Standard
- Pool = Default
- # This creates an ASCII copy of the catalog
- RunBeforeJob = "@sbindir@/make_catalog_backup -u bacula"
- # This deletes the copy of the catalog
- RunAfterJob = "@sbindir@/delete_catalog_backup"
- Write Bootstrap = "@working_dir@/BackupCatalog.bsr"
-}
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include { Options { signature=MD5 }
- File = </tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseSet"
- Include { Options { signature=MD5; sparse=yes }
- File=</tmp/file-list
- }
-}
-
-FileSet {
- Name = "CompressedSet"
- Include {
- Options { signature=MD5; compression=GZIP }
- File =</tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseCompressedSet"
- Include {
- Options {
- signature=MD5; compression=GZIP
- }
- File= </tmp/file-list
- }
-}
-
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# This schedule does the catalog. It starts after the WeeklyCycle
-Schedule {
- Name = "WeeklyCycleAfterBackup"
- Run = Full sun-sat at 1:10
-}
-
-# This is the backup of the catalog
-FileSet {
- Name = "Catalog"
- Include { Options { signature=MD5 }
- File=/home/kern/bacula/regress/bin/working/bacula.sql
- }
-}
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-# Definiton of file storage device
-Storage {
- Name = File
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage
- Media Type = File
- Maximum Concurrent Jobs = 4
-}
-
-Storage {
- Name = File1
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage1
- Media Type = File1
- Maximum Concurrent Jobs = 4
-}
-
-
-# Definition of DLT tape storage device
-#Storage {
-# Name = DLTDrive
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = "HP DLT 80" # must be same as Device in Storage daemon
-# Media Type = DLT8000 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of DDS tape storage device
-#Storage {
-# Name = SDT-10000
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = SDT-10000 # must be same as Device in Storage daemon
-# Media Type = DDS-4 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of 8mm tape storage device
-#Storage {
-# Name = "8mmDrive"
-# Address = @hostname@ # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-# Device = "Exabyte 8mm"
-# MediaType = "8mm"
-#}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-Messages {
- Name = NoEmail
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- console = all, !skipped, !terminate
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-#
-# Message delivery for daemon messages (no job).
-Messages {
- Name = Daemon
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula\) %r\" -s \"Bacula daemon message\" %r"
- mail = @job_email@ = all, !skipped
- console = all, !skipped, !saved
- append = "@working_dir@/log" = all, !skipped
-}
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
+++ /dev/null
-#
-# Default Bacula File Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# There is not much to change here except perhaps the
-# File daemon Name to
-#
-
-#
-# List Directors who are permitted to contact this File daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc"
-}
-
-#
-# "Global" File daemon configuration specifications
-#
-FileDaemon { # this is me
- Name = @hostname@-fd
- FDport = 8102 # where we listen for the director
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- SubSys Directory = "@subsysdir@"
-}
-
-# Send all messages except skipped files back to Director
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.33
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = @hostname@-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = @hostname@-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-
-Device {
- Name = FileStorage
- Media Type = File
- Archive Device = @tmpdir@
- LabelMedia = yes; # lets Bacula label unlabelled media
- Random Access = Yes;
- AutomaticMount = yes; # when device opened, read it
- RemovableMedia = no;
- AlwaysOpen = no;
-# Maximum File Size = 10KB
-}
-
-Device {
- Name = FileStorage1
- Media Type = File1
- Archive Device = @tmpdir@
- LabelMedia = yes; # lets Bacula label unlabelled media
- Random Access = Yes;
- AutomaticMount = yes; # when device opened, read it
- RemovableMedia = no;
- AlwaysOpen = no;
-}
-
-
-#Device {
-# Name = "HP DLT 80"
-# Media Type = DLT8000
-# Archive Device = /dev/nst0
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = yes;
-# RemovableMedia = yes;
-#}
-
-#Device {
-# Name = SDT-7000 #
-# Media Type = DDS-2
-# Archive Device = /dev/nst0
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = yes;
-# RemovableMedia = yes;
-#}
-
-#Device {
-# Name = Floppy
-# Media Type = Floppy
-# Archive Device = /mnt/floppy
-# RemovableMedia = yes;
-# Random Access = Yes;
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = no;
-#}
-
-#
-# A very old Exabyte with no end of media detection
-#
-#Device {
-# Name = "Exabyte 8mm"
-# Media Type = "8mm"
-# Archive Device = /dev/nst0
-# Hardware end of medium = No;
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = Yes;
-# RemovableMedia = yes;
-#}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = @hostname@-dir = all, !terminate
-}
+++ /dev/null
-#
-# Bacula User Agent (or Console) Configuration File
-#
-
-Director {
- Name = @hostname@-dir
- DIRport = 8101
- address = @hostname@
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
-}
+++ /dev/null
-#
-# TestA Bacula Director Configuration file
-#
-# For Bacula release 1.30 (12 April 2003) -- redhat 7.3
-#
-
-Director { # define myself
- Name = @hostname@-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- SubSysDirectory = "@subsysdir@"
- Maximum Concurrent Jobs = 1
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3" # Console password
- Messages = Standard
-}
-
-
-Job {
- Name = "MultiVol"
- Type = Backup
- Client=@hostname@-fd
- Level = Full
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Write Bootstrap = "@working_dir@/SmallVols.bsr"
- Pool = SmallVols
- SpoolData = yes
-}
-
-
-Job {
- Name = "VerifyVolume"
- Type = Verify
- Level = VolumeToCatalog
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include { Options { signature=SHA1 }
- File =</tmp/file-list
- }
-}
-
-
-# Client (File Services) to backup
-Client {
- Name = @hostname@-fd
- Address = @hostname@
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
-}
-
-# Definiton of file storage device
-Storage {
- Name = File
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage
- Media Type = File
-}
-
-Storage {
- Name = File1
- Address = @hostname@ # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage1
- Media Type = File1
-}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all, !terminate
- operator = @job_email@ = mount
- console = all, !skipped, !terminate
-
- append = "@working_dir@/log" = all, !skipped
-}
-
-Messages {
- Name = NoEmail
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- console = all, !skipped, !terminate, !restored
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
-
-Pool {
- Name = SmallVols
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
- Maximum Volumes = 10
- MaximumVolumeBytes = 10M
- LabelFormat = Small
-}
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.39.23
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = localhost-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- Maximum Concurrent Jobs = 4
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
- Messages = Daemon
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=Tibs
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
- SpoolData = yes
-}
-
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=Tibs
- FileSet="Full Set"
- Storage = DDS-4
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Enable VSS = yes
- Include { Options { signature=MD5; portable=no
- compression=GZIP }
-# File = "c:/cygwin" # big
- File = "c:/cygwin/home/kern/bacula/k"
- }
-}
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# Client (File Services) to backup
-Client {
- Name = Tibs
- Address = tibs
- FDPort = 9102
- Catalog = MyCatalog
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-Client {
- Name = localhost-fd
- Address = localhost
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc"
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
-}
-
-
-# Definition of DDS tape storage device
-Storage {
- Name = DDS-4
- Address = 192.168.68.112 # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
- Device = DDS-4 # must be same as Device in Storage daemon
- Media Type = DDS-4 # must be same as MediaType in Storage daemon
- AutoChanger = yes
- Maximum Concurrent Jobs = 4
-}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula Regression\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = @job_email@ = all, !terminate
- operator = @job_email@ = mount
- console = all, !skipped, !terminate, !restored
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-#
-# Message delivery for daemon messages (no job).
-Messages {
- Name = Daemon
- mailcommand = "@smtp_program@ -h @smtp_host@ -f \"\(Bacula\) %r\" -s \"Bacula daemon message\" %r"
- mail = @job_email@ = all, !skipped
- console = all, !skipped, !saved
- append = "@working_dir@/log" = all, !skipped
-}
-
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
-}
+++ /dev/null
-# nothing needed for Linux
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 Pool=Default drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 Pool=Default drive=1
-status storage=DDS-4
-@#setdebug level=120 storage=DDS-4
-run job=NightlySave yes
-run job=NightlySave yes
-run job=NightlySave yes
-run job=NightlySave yes
-run job=NightlySave yes
-@sleep 3
-status storage=DDS-4
-wait
-list volumes
-list jobs
-status storage=DDS-4
-messages
-quit
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-@# Force Incremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-status storage=DDS-4
-@#setdebug level=120 storage=DDS-4
-run level=Incremental job=NightlySave yes
-wait
-list volumes
-status storage=DDS-4
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores
-7
-<@topdir@/tmp/restore-list
-
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory then create some
-REM new files, do an Incremental and restore those two files.
-REM
-REM This script uses the virtual disk autochanger and two drives
-REM
-SET TestName=2drive-incremental-2disk
-SET JobName=2drive2disk
-
-CALL config_out
-CALL scripts\functions set_debug 0
-
-CALL scripts\cleanup
-CALL scripts\copy-2disk-drive-confs >nul 2>&1
-CALL scripts\prepare-two-disks
-
-CALL scripts\functions change_jobname localhost-fd %JobName%
-CALL scripts\functions start_test
-
-ECHO %CD:\=/%/tmp/build >\tmp\file-list
-IF NOT EXIST tmp\build MKDIR tmp\build
-COPY build\src\dird\*.c tmp\build >nul 2>&1
-
-ECHO %CD:\=/%/tmp/build/ficheriro1.txt>tmp\restore-list
-ECHO %CD:\=/%/tmp/build/ficheriro2.txt>>tmp\restore-list
-
-REM Turn off Prefer Mounted Volumes so we use2 drives
-COPY bin\bacula-dir.conf tmp\1 >nul 2>&1
-REM Comment the next line out to write everything to one drive
-REM otherwise, it writes the two jobs to different drives
-sed -e "s;# Prefer Mounted Volumes; Prefer Mounted Volumes;g" tmp\1 >bin\bacula-dir.conf
-
-REM Write out bconsole commands
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\2drive-incremental-2disk.1.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-ECHO ficheriro1.txt >tmp\build\ficheriro1.txt
-ECHO ficheriro2.txt >tmp\build\ficheriro2.txt
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\2drive-incremental-2disk.2.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-CALL scripts\functions check_for_zombie_jobs storage=DDS-4
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-REM The restore should read from TestVolume002, which was on drive 1
-grep TestVolume002 tmp\log2.out >nul 2>&1
-IF %ERRORLEVEL% NEQ 0 SET rstat=%ERRORLEVEL%
-
-REM
-REM Delete .c files because we will only restored the txt files
-REM
-DEL tmp\build\*.c
-CALL scripts\functions check_restore_tmp_build_diff
-
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do an Incremental and restore those two files.
-#
-# This script uses the autochanger and two tapes
-#
-. config.out
-if test x${TAPE_DRIVE1} = x/dev/null ; then
- echo "Skipping 2drive-incremenatal-2tape test. No second drive."
- exit
-fi
-TestName="2drive-incremental-2tape"
-JobName="2drive2tape"
-. scripts/functions
-set_debug 0
-
-cwd=`pwd`
-
-scripts/copy-2drive-confs
-scripts/cleanup-2drive
-
-change_jobname localhost-fd $JobName
-
-echo "${cwd}/tmp/build" >/tmp/file-list
-if test ! -d ${cwd}/tmp/build ; then
- mkdir ${cwd}/tmp/build
-fi
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-# Turn off Prefer Mounted Volumes so we use 2 drives
-outf="tmp/sed_tmp"
-echo "s%# Prefer Mounted Volumes% Prefer Mounted Volumes%g" >${outf}
-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1
-# Comment the next line out to write everything to one drive
-# otherwise, it writes the two jobs to different drives
-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf
-
-start_test
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 Pool=Default drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 Pool=Default drive=1
-@#setdebug level=100 storage=DDS-4
-run job=NightlySave yes
-run job=NightlySave yes
-run job=NightlySave yes
-run job=NightlySave yes
-run job=NightlySave yes
-@sleep 3
-status storage=DDS-4
-wait
-list volumes
-list jobs
-status storage=DDS-4
-messages
-quit
-END_OF_DATA
-
-run_bacula
-
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-@# Force Incremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-status storage=DDS-4
-@#setdebug level=400 storage=DDS-4
-run level=Incremental job=NightlySave yes
-wait
-list volumes
-status storage=DDS-4
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-check_restore_tmp_build_diff
-
-end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-status all
-status all
-list pools
-messages
-@#setdebug level=110 storage=File
-run job=@JobName@ storage=File yes
-list pools
-list volumes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select storage=File
-unmark *
-mark *
-count
-ls *
-dir *
-find Makefile
-pwd
-lsmark
-estimate
-?
-help
-done
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Test if Bacula can automatically create a Volume label.
-REM
-
-SET TestName=auto-label-test
-SET JobName=AutoLabel
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-COPY bin\bacula-dir.conf tmp\1
-sed -e "s;# Label Format; Label Format;" tmp\1 >bin\bacula-dir.conf
-
-CALL scripts\functions change_jobname CompressedTest %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\auto-label-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape then restore it, we do that twice to ensure that
-# we can correctly append to a tape.
-# We also use the purge and the relabel commands as
-# well as a pile of status storage commands.
-#
-TestName="backup-bacula-tape"
-JobName=backuptape
-. scripts/functions
-set_debug 0
-
-scripts/copy-tape-confs
-scripts/cleanup-tape
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-
-# Write out bconsole commands
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-@#setdebug level=200 storage=DDS-4
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-purge volume=TestVolume001
-relabel pool=Default storage=DDS-4 oldVolume=TestVolume001 volume=TestVolume002 slot=0
-purge volume=TestVolume002
-relabel pool=Default storage=DDS-4 oldVolume=TestVolume002 volume=TestVolume001 slot=0
-run job=$JobName yes
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-@sleep 1
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-@sleep 1
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-@sleep 1
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-@sleep 1
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-status storage=DDS-4
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-list volumes
-messages
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-#
-# Now do a second backup after making a few changes
-#
-touch ${cwd}/build/src/dird/*.c
-echo "test test" > ${cwd}/build/src/dird/xxx
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-list volumes
-run job=$JobName yes
-wait
-list volumes
-messages
-@#
-@# now do a second restore
-@#
-@$out tmp/log2.out
-list volumes
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-list volumes
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label volume=TestVolume001
-@#setdebug level=100 storage=File
-run job=@JobName@ yes
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-@sleep 1
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-@sleep 1
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-status storage=File
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select all done
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory
-REM then restore it.
-REM
-
-SET TestName=backup-bacula-test
-SET JobName=backup
-CALL scripts\functions set_debug 0
-
-CALL scripts\cleanup
-CALL scripts\copy-confs >nul 2>&1
-
-CALL scripts\functions change_jobname Client1 %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\backup-bacula-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape then restore it, we do that twice to ensure that
-# we can correctly append to a tape.
-#
-TestName="backup-win32-tape"
-JobName=backupwintape
-. scripts/functions
-set_debug 0
-
-scripts/cleanup-tape
-scripts/copy-win32-confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname $JobName
-start_test
-
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=NightlySave yes
-@sleep 10
-status storage=DDS-4
-@sleep 30
-messages
-wait
-messages
-@#
-@# now do a restore
-@#
-@$outt tmp/log2.out
-@#restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-@#yes
-@#wait
-@#messages
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label storage=File1 volume=TestVolume001
-label storage=File1 volume=TestVolume002
-update Volume=TestVolume001 MaxVolBytes=3000000
-@#setdebug level=400 dir
-@#setdebug level=400 storage=File1
-run job=@JobName@ storage=File1 yes
-wait
-messages
-@#
-@# now build the bsr file
-@#
-@@out@ tmp/log2.out
-restore bootstrap=@topdir@/working/restore.bsr where=@topdir@/tmp/bacula-restores select all storage=File1 done
-no
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory but
-REM split the archive into two volumes, then build a BSR with
-REM the restore command and use bextract to restore the files.
-REM
-SET TestName=bextract-test
-SET JobName=bextract
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\bextract-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File1
-CALL scripts\functions stop_bacula
-
-MKDIR %CD%\tmp\bacula-restores
-bin\bextract -b working/restore.bsr -c bin/bacula-sd.conf %CD:\=/%/tmp %CD:\=/%/tmp/bacula-restores 2>&1 >nul
-SET rstat=%ERRORLEVEL%
-grep "^ Termination: *Backup OK" tmp\log1.out 2>&1 >nul
-SET bstat=%ERRORLEVEL%
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup four times, each with incremental then
-# do a bscan and restore.
-# It should require at least 4 different bsrs.
-#
-TestName="bscan-tape"
-JobName=bscantape
-. scripts/functions
-set_debug 1
-
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-# sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-setdebug level=2 storage=DDS-4
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-echo "Starting Bacula tape writing"
-#bin/btape -c bin/bacula-sd.conf /dev/nst0 <<END_OF_DATA
-#rewind
-#label
-#Test001
-#wr
-#wr
-#wr
-#wr
-#wr
-#wr
-#weof
-#quit
-#END_OF_DATA
-#run_bacula
-#check_for_zombie_jobs storage=DDS-4
-#stop_bacula
-echo "End writing tape"
-
-#
-# now drop and recreate the database
-#
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges 2>&1 >/dev/null
-cd ..
-
-echo "Begin attempt to read tape that crashes the system"
-echo "volume=TestVolume001" >tmp/bscan.bsr
-strace -o strace.new bin/bscan -d200 -w working -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf DDS-4
-exit
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log2.out
-@#
-@# now do a restore
-@#
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-rm -f ${cwd}/build/src/lib/dummy
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup four times, each with incremental then
-# do a bscan and restore.
-# It should require at least 4 different bsrs.
-#
-TestName="bscan-tape"
-JobName=bscantape
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-estimate job=$JobName listing
-estimate job=$JobName listing
-estimate job=$JobName listing
-messages
-@$out tmp/log1.out
-setdebug level=2 storage=DDS-4
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName yes
-wait
-run job=$JobName level=Full yes
-wait
-run job=$JobName level=Full yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-
-echo "Backup 1 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/dird/*.c ${cwd}/build/src/dird/*.o
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-
-#
-# run a second job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-scripts/check_for_zombie_jobs storage=DDS-4
-
-echo "Backup 2 done"
-touch ${cwd}/build/src/dird/*.c
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#
-# run a third job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-scripts/check_for_zombie_jobs storage=DDS-4
-
-echo "Backup 3 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#echo "abc" > ${cwd}/build/src/lib/dummy
-#
-# run a fourth job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-
-scripts/check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-echo "Backup 4 done"
-#
-# now drop and recreate the database
-#
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges 2>&1 >/dev/null
-cd ..
-
-echo "volume=TestVolume001" >tmp/bscan.bsr
-bin/bscan -w working -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf DDS-4 2>&1 >/dev/null
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log2.out
-@#
-@# now do a restore
-@#
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-rm -f ${cwd}/build/src/lib/dummy
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-label storage=File1
-TestVolume001
-label storage=File1
-TestVolume002
-update Volume=TestVolume001 MaxVolBytes=3000000
-run job=@JobName@ storage=File1
-yes
-wait
-messages
-@@out@ nul
-@#
-@# now purge the Volume
-@#
-purge volume=TestVolume001
-purge volume=TestVolume002
-delete volume=TestVolume001
-yes
-delete volume=TestVolume002
-yes
-messages
-quit
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log2.out
-@#
-@# now do a restore
-@#
-@#setdebug level=400 storage=File1
-restore bootstrap=@topdir@/tmp/bscan.bsr where=@topdir@/tmp/bacula-restores select all storage=File1 done
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory but
-REM split the archive into two volumes then bscan it
-REM into the catalog after the backup. It also to a limited
-REM extent tests the purge volume and delete volume commands.
-REM
-
-SET TestName=bscan-test
-SET JobName=bscan
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\bscan-test.1.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File1
-CALL scripts\functions stop_bacula
-
-ECHO volume=TestVolume001^|TestVolume002 >tmp\bscan.bsr
-
-IF %debug% EQU 1 (
- bin\bscan -w working -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf %CD:\=/%/tmp | tools\tee tmp\log.out
-) ELSE (
- bin\bscan -w working -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf %CD:\=/%/tmp >nul 2>&1
-)
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\bscan-test.2.bscr >tmp\bconcmds
-
-REM now run restore
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File1
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-label storage=File1 volume=TestVolume001
-label storage=File1 volume=TestVolume002
-update Volume=TestVolume001 MaxVolBytes=3000000
-run job=@JobName@ storage=File1 yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore bootstrap=@topdir@/working/restore.bsr where=@topdir@/tmp/bacula-restores select storage=File1
-unmark *
-cd @topdir@/build/src/cats
-mark *
-ls
-done
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory but
-REM split the archive into two volumes, then restore
-REM files on only one of the volumes and ensure that
-REM the other volume is not used. I.e. bsr optimization
-REM works.
-REM
-SET TestName=bsr-opt-test
-SET JobName=bsr-opt
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\bsr-opt-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File1
-CALL scripts\functions stop_bacula
-REM
-REM This test is not really reliable. What we want to do is
-REM to select files on only one Volume, then insure here
-REM that only one Volume is chosen.
-REM
-grep TestVolume002 working\restore.bsr >nul 2>&1
-SET bsrstat=%ERRORLEVEL%
-CALL scripts\functions check_two_logs
-
-diff -r build\src\cats tmp\bacula-restores\%CD::=%\build\src\cats >nul 2>&1
-SET /A errcount = %bsrstat% + %bstat% + %rstat%
-IF %errcount% NEQ 0 (
- ECHO.
- ECHO.
- ECHO !!!!! bsr-opt-test Bacula source failed!!! !!!!!
- ECHO !!!!! bsr-opt-test failed!!! !!!!! >>test.out
-
- SET /A errcount = %bstat% + %rstat%
- IF %errcount% NEQ 0 (
- ECHO !!!!! Bad Job termination status !!!!!
- ECHO !!!!! Bad Job termination status !!!!! >>test.out
- ) ELSE IF %bsrstat% NEQ 0 (
- ECHO !!!!! Volume selection error !!!!!
- ECHO !!!!! Volume selection error !!!!! >>test.out
- ) ELSE (
- ECHO !!!!! Restored files differ !!!!!
- ECHO !!!!! Restored files differ !!!!! >>test.out
- )
- ECHO.
-) ELSE (
- ECHO ===== bsr-opt-test Bacula source OK %TIME% =====
- ECHO ===== bsr-opt-test OK %TIME% ===== >>test.out
- CALL scripts\cleanup
-)
+++ /dev/null
-#!/bin/sh
-#
-# Test the fill command in btape
-#
-TestName="btape-fill-full-tape"
-JobName=AutoLabel
-. scripts/functions
-set_debug 0
-
-scripts/copy-tape-confs
-scripts/cleanup-tape
-
-change_jobname $JobName
-start_test
-
-bin/btape -c bin/bacula-sd.conf DDS-4 <<END_OF_DATA 2>&1 >tmp/log1.out
-fill
-s
-
-quit
-END_OF_DATA
-
-
-grep "^The last block on the tape matches\. Test succeeded\." tmp/log1.out 2>&1 >/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! btape fill test failed!!! !!!!! "
- echo " !!!!! btape fill test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== btape fill test OK ===== "
- echo " ===== btape fill test OK ===== " >>test.out
-# scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Test the fill command in btape
-#
-TestName="btape-fill-tape"
-JobName=filltape
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# MaximumVolumeSize% MaximumVolumeSize%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-fill
-s
-quit
-END_OF_DATA
-
-run_btape DDS-4
-
-grep "^The last block on the tape matches\. Test succeeded\." tmp/log1.out 2>&1 >/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " !!!!! btape fill test failed!!! !!!!! "
- echo " !!!!! btape fill test failed!!! !!!!! " >>test.out
- echo " "
-else
- echo " ===== btape fill test OK ===== "
- echo " ===== btape fill test OK ===== " >>test.out
-# scripts/cleanup
-fi
+++ /dev/null
-@output
-messages
-@@out@ tmp/log1.out
-status all
-status all
-messages
-label storage=File volume=TestVolume001
-run job=@JobName@ storage=File yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory using the compressed option
-REM then restore it.
-REM
-SET TestName=compressed-test
-SET JobName=compressed
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions change_jobname CompressedTest %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\compressed-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label storage=File volume=TestVolume001
-run job=@JobName@ level=Full yes
-run job=@JobName@ level=Full yes
-run job=@JobName@ level=Full yes
-run job=@JobName@ level=Full yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
+++ /dev/null
-REM
-REM Run two jobs at the same time
-REM
-
-SET TestName=concurrent-jobs-test
-SET JobName=concurrent-jobs
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/tmp/largefile >\tmp\file-list
-ECHO Creating a 50MB file with bacula-dir data ...
-tools\dd if=bin/bacula-dir.exe of=%CD:\=/%/tmp/1 bs=1024 count=512 >nul 2>&1
-COPY /b %CD%\tmp\1+%CD%\tmp\1+%CD%\tmp\1+%CD%\tmp\1 %CD%\tmp\2 >nul 2>&1
-DEL %CD%\tmp\1
-COPY /b %CD%\tmp\2+%CD%\tmp\2+%CD%\tmp\2+%CD%\tmp\2+%CD%\tmp\2 %CD%\tmp\3 >nul 2>&1
-DEL %CD%\tmp\2
-COPY /b %CD%\tmp\3+%CD%\tmp\3+%CD%\tmp\3+%CD%\tmp\3+%CD%\tmp\3 %CD%\tmp\largefile >nul 2>&1
-DEL %CD%\tmp\3
-
-ECHO largefile created
-
-CALL scripts\functions change_jobname CompressedTest %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\concurrent-jobs-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-diff tmp\largefile tmp\bacula-restores\%CD::=%\tmp\largefile >nul 2>&1
-SET dstat=%ERRORLEVEL%
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-MUID=`/usr/bin/id -u`
-if [ $MUID != 0 ] ; then
- echo " "
- echo "You must be root to run this test."
- echo " ===== !!!! dev-test-root not run !!!! ===== "
- echo " ===== !!!! dev-test-root not run !!!! ===== " >>test.out
- echo " "
- exit 1
-fi
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "/dev" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting dev-test-root test ==="
-echo " "
-echo " === Note, this test can fail for trivial ==="
-echo " === reasons on non-Linux systems. ==="
-echo " "
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test dev >${cwd}/tmp/original
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test dev >${cwd}/tmp/restored
-cd ${cwd}/tmp
-#
-# Use sed to cut out parts that *always* change
-#
-cat >sed.scr <<END_OF_DATA
-s%.*dev$%dev%
-s%.*[0-9][0-9]:[0-9][0-9]:[0-9][0-9] dev/ptmx%dev/ptmx%
-s%.*[0-9][0-9]:[0-9][0-9]:[0-9][0-9] dev/ttyp1%dev/ttyp1%
-s%.*[0-9][0-9]:[0-9][0-9]:[0-9][0-9] dev/null%dev/null%
-END_OF_DATA
-
-# strip file system change messages then sed and sort
-grep -v "Skip: File system change prohibited." original >1
-sed -f sed.scr 1 | sort >original
-#
-mv -f restored 1
-sed -f sed.scr 1 | sort >restored
-rm -f sed.scr
-#
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== !!!! dev-test-root failed !!!! ===== "
- echo " ===== !!!! dev-test-root failed !!!! ===== " >>test.out
- echo " "
-else
- echo " ===== dev-test-root OK ===== "
- echo " ===== dev-test-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-label storage=File volume=TestVolume002
-label storage=File volume=TestVolume001
-run job=@JobName@ yes
-wait
-messages
-quit
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-@# Force differential on the second Volume
-update volume=TestVolume002 VolStatus=Used
-run level=differential job=@JobName@ yes
-wait
-messages
-@@out@
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-run level=incremental job=@JobName@ yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores storage=File file=<@topdir@/tmp/restore-list
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory then create some
-REM new files, do a differential and restore those two files.
-REM
-SET TestName=differential-test
-SET JobName=differential
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/tmp/build >\tmp\file-list
-MKDIR tmp\build
-COPY build\src\dird\*.c tmp\build >nul 2>&1
-
-ECHO %CD:\=/%/tmp/build/ficheriro1.txt>tmp\restore-list
-ECHO %CD:\=/%/tmp/build/ficheriro2.txt>>tmp\restore-list
-
-CALL scripts\functions change_jobname CompressedTest %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\differential-test.1.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-
-ECHO ficheriro1.txt >tmp\build\ficheriro1.txt
-ECHO ficheriro2.txt >tmp\build\ficheriro2.txt
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\differential-test.2.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-
-CALL scripts\functions check_for_zombie_jobs storage=File
-ECHO ficheriro2.txt >tmp\build\ficheriro2.txt
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\differential-test.3.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-REM
-REM Delete .c files because we will only restore the txt files
-REM
-DEL tmp\build\*.c
-CALL scripts\functions check_restore_tmp_build_diff
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to two tapes where the maximum tape file size is set to 1M
-#
-TestName="eot-fail-tape"
-JobName=eotfailtape
-. scripts/functions
-set_debug 0
-
-scripts/cleanup-tape
-scripts/copy-tape-confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-out="tmp/sed_tmp"
-echo "s%# Maximum File Size% Maximum File Size%g" >${out}
-cp -f ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed -f ${out} ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-update Volume=TestVolume001 MaxVolBytes=3000000
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@tee
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-MUID=`/usr/bin/id -u`
-if [ $MUID != 0 ] ; then
- echo " "
- echo "You must be root to run this test."
- echo " ===== !!!! etc-test-root not run !!!! ===== "
- echo " ===== !!!! etc-test-root not run !!!! ===== " >>test.out
- echo " "
- exit 1
-fi
-echo " "
-echo " "
-echo " === Starting /etc save/restore test ==="
-echo " "
-echo " "
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "/etc" >/tmp/file-list
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File
-TestVolume001
-run job=NightlySave
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test etc >${cwd}/tmp/1
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test etc >${cwd}/tmp/2
-sort <${cwd}/tmp/1 >${cwd}/tmp/original
-sort <${cwd}/tmp/2 >${cwd}/tmp/restored
-rm -f ${cwd}/tmp/1 ${cwd}/tmp/2
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/null
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== !!!! etc-test-root failed !!!! ===== "
- echo " ===== !!!! etc-test-root failed !!!! ===== " >>test.out
- echo " "
-else
- echo " ===== etc-test-root OK ===== "
- echo " ===== etc-test-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape where we set the minimum and maximum block
-# sizes.
-#
-TestName="fixed-block-size-tape"
-JobName=fixedblocksize
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-echo "s%# Maximum Block Size% Maximum Block Size%" >${cwd}/tmp/2
-echo "s%# Minimum Block Size% Minimum Block Size%" >>${cwd}/tmp/2
-sed -f ${cwd}/tmp/2 ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo "!!!! sed problem in Fixed Block Size test !!!!!"
- echo " "
- exit 1
-fi
-rm -f ${cwd}/tmp/1 ${cwd}/tmp/2
-
-change_jobname NightlySave $JobName
-start_test
-
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DDS-4
-unmark *
-mark *
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run four jobs at the same time
-#
-TestName="four-concurrent-jobs-tape"
-JobName=FourConcurrentJobs
-. scripts/functions
-set_debug 0
-
-scripts/cleanup-tape
-scripts/copy-tape-confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName level=Full Storage=DDS-4 yes
-run job=$JobName level=Full Storage=DDS-4 yes
-run job=$JobName level=Full Storage=DDS-4 yes
-run job=$JobName level=Full Storage=DDS-4 yes
-@sleep 2
-status dir
-@sleep 5
-status dir
-status storage=DDS-4
-messages
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DDS-4
-unmark *
-mark *
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label storage=File1
-TestVolume001
-label storage=File1
-TestVolume002
-update Volume=TestVolume001 MaxVolBytes=100000000
-@#50000000
-@#12
-run job=@JobName@ level=Full Storage=File1
-yes
-reload
-run job=@JobName@ level=Full Storage=File1
-yes
-reload
-run job=@JobName@ level=Full Storage=File1
-yes
-reload
-run job=@JobName@ level=Full Storage=File1
-yes
-reload
-reload
-reload
-reload
-@sleep 2
-status dir
-reload
-@sleep 5
-messages
-reload
-reload
-wait
-reload
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select storage=File1
-unmark *
-mark *
-done
-yes
-wait
-reload
-reload
-messages
-@output
-quit
+++ /dev/null
-REM
-REM Run two jobs at the same time
-REM
-SET TestName=four-concurrent-jobs-test
-SET JobName=Four-concurrent-jobs
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\four-concurrent-jobs-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File1
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup four times, each with incremental then finally restore.
-# It should require at least 4 different bsrs.
-#
-TestName="four-jobs-tape"
-JobName=fourjobstape
-. scripts/functions
-set_debug 0
-
-scripts/cleanup-tape
-scripts/copy-tape-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-estimate job=$JobName listing
-estimate job=$JobName listing
-estimate job=$JobName listing
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-if test "$debug" -eq 1 ; then
- bin/bacula start
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
-else
- bin/bacula start 2>&1 >/dev/null
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
-fi
-
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 1 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/dird/*.c ${cwd}/build/src/dird/*.o
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-
-#
-# run a second job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-if test "$debug" -eq 1 ; then
- bin/bacula start
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
-else
- bin/bacula start 2>&1 >/dev/null
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
-fi
-
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 2 done"
-touch ${cwd}/build/src/dird/*.c
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#
-# run a third job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-if test "$debug" -eq 1 ; then
- bin/bacula start
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
-else
- bin/bacula start 2>&1 >/dev/null
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
-fi
-
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 3 done"
-# make some files for the incremental to pick up
-touch ${cwd}/build/src/lib/*.c ${cwd}/build/src/lib/*.o
-#
-# run a fourth job
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Incremental yes
-wait
-messages
-quit
-END_OF_DATA
-if test "$debug" -eq 1 ; then
- bin/bacula start
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
-else
- bin/bacula start 2>&1 >/dev/null
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
-fi
-
-scripts/check_for_zombie_jobs storage=DDS-4
-echo "Backup 4 done"
-#
-# now do several restores to ensure we cleanup between jobs
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-@$out tmp/log2.out
-@#
-@# now unmount the tape and start two restores
-@# at the same time
-@#
-unmount storage=DDS-4
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-restore where=${cwd}/tmp/bacula-restores select
-unmark *
-mark *
-done
-yes
-mount storage=DDS-4
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-@output nul
-estimate job=@JobName@ listing
-estimate job=@JobName@ listing
-estimate job=@JobName@ listing
-messages
-@@out@ tmp/log1.out
-label storage=File volume=TestVolume001
-run job=@JobName@ yes
-wait
-messages
-quit
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-run job=@JobName@
-yes
-wait
-messages
-quit
+++ /dev/null
-@output nul
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=@JobName@ yes
-wait
-messages
-quit
+++ /dev/null
-@output nul
-messages
-@output tmp/log1.out
-label storage=File volume=TestVolume001
-run job=@JobName@ yes
-wait
-messages
-quit
+++ /dev/null
-@output nul
-restore where=@topdir@/tmp/bacula-restores select all storage=File done
-yes
-wait
-restore where=@topdir@/tmp/bacula-restores select all storage=File done
-yes
-wait
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory using the compressed option
-REM then backup four times, each with incremental then finally restore.
-REM It should require at least 4 different bsrs.
-REM
-SET TestName=four-jobs-test
-SET JobName=SpanVol
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >/tmp/file-list
-
-CALL scripts\functions change_jobname CompressedTest %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\four-jobs-test.1.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-
-ECHO Backup 1 done
-
-REM make some files for the incremental to pick up
-tools\touch %CD:\=/%/build/src/dird/*.c
-tools\touch %CD:\=/%/build/src/lib/*.c
-
-REM
-REM run a second job
-REM
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\four-jobs-test.2.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-CALL scripts\functions check_for_zombie_jobs storage=File
-
-ECHO Backup 2 done
-
-tools\touch %CD:\=/%/build/src/dird/*.c
-tools\touch %CD:\=/%/build/src/lib/*.c
-
-REM
-REM run a third job
-REM
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\four-jobs-test.3.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-CALL scripts\functions check_for_zombie_jobs storage=File
-
-ECHO Backup 3 done
-
-REM make some files for the incremental to pick up
-tools\touch %CD:\=/%/build/src/lib/*.c
-
-REM
-REM run a fourth job
-REM
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\four-jobs-test.4.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-CALL scripts\functions check_for_zombie_jobs storage=File
-
-ECHO Backup 4 done
-REM
-REM now do several restores to ensure we cleanup between jobs
-REM
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\four-jobs-test.5.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-TestName="hardlink-test"
-JobName=hardlink
-. scripts/functions
-set_debug 0
-
-if test ! -d weird-files ; then
- echo " "
- echo "Weird files not configured. Test not run."
- exit 0
-fi
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-change_jobname NightlySave $JobName
-#
-# Note, we save the weird-files directory twice on purpose
-# because this causes problems with hard linked files
-# that are only saved once. In 1.33, Bacula now deals
-# with this situation.
-#
-echo "${cwd}/weird-files" >/tmp/file-list
-echo "${cwd}/weird-files" >>/tmp/file-list
-
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File
-TestVolume001
-run job=$JobName
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=File
-5
-cd ${cwd}/weird-files/subdir
-mark another-hardlink
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-check_two_logs
-diff ${cwd}/weird-files/subdir/another-hardlink \
- ${cwd}/tmp/bacula-restores/${cwd}/weird-files/subdir/another-hardlink 2>&1 >/dev/null
-dstat=$?
-end_test
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 Pool=Default drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 Pool=Default drive=0
-run job=@JobName@ yes
-wait
-messages
-quit
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-@# Force Incremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-run level=Incremental job=@JobName@ yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores
-7
-<@topdir@/tmp/restore-list
-
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory then create some
-REM new files, do an Incremental and restore those two files.
-REM
-REM This script uses the virtual disk autochanger
-REM
-SET TestName=incremental-2disk
-SET JobName=Inc2disk
-
-CALL scripts\functions set_debug 0
-
-CALL config_out
-
-CALL scripts\functions stop_bacula
-
-CALL bin\drop_bacula_tables >nul 2>&1
-CALL bin\make_bacula_tables >nul 2>&1
-CALL bin\grant_bacula_privileges >nul 2>&1
-
-CALL scripts\copy-2disk-confs >nul 2>&1
-CALL scripts\prepare-two-disks
-
-ECHO %CD:\=/%/tmp/build >\tmp\file-list
-IF NOT EXIST tmp\build MKDIR tmp\build
-
-COPY build\src\dird\*.c tmp\build >nul 2>&1
-ECHO %CD:\=/%/tmp/build/ficheriro1.txt>tmp\restore-list
-ECHO %CD:\=/%/tmp/build/ficheriro2.txt>>tmp\restore-list
-
-CALL scripts\functions change_jobname %JobName%
-CALL scripts\functions start_test
-
-REM Write out bconsole commands
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\incremental-2disk.1.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-
-ECHO ficheriro1.txt >tmp\build\ficheriro1.txt
-ECHO ficheriro2.txt >tmp\build\ficheriro2.txt
-
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\incremental-2disk.2.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-REM
-REM Delete .c files because we will only restored the txt files
-REM
-DEL tmp\build\*.c
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_tmp_build_diff
-CALL scripts\functions end_test
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 Pool=Default drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 Pool=Default drive=0
-run job=NightlySave yes
-wait
-messages
-quit
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-@# Force Incremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-run level=Incremental job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores
-7
-<@topdir@/tmp/restore-list
-
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory then create some
-REM new files, do an Incremental and restore those two files.
-REM
-REM This script uses the autochanger and two tapes
-REM
-SET TestName=incremental-2tape
-SET JobName=inctwotape
-CALL scripts\functions set_debug 0
-
-CALL config_out
-IF "%AUTOCHANGER%" == "nul" (
- ECHO incremental-2tape test skipped. No autochanger.
- EXIT
-)
-
-CALL scripts\functions stop_bacula
-CALL drop_bacula_tables >nul 2>&1
-CALL make_bacula_tables >nul 2>&1
-CALL grant_bacula_privileges >nul 2>&1
-
-CALL scripts\copy-2tape-confs
-CALL scripts\cleanup-2tape
-ECHO %CD:\=/%/tmp/build >\tmp\file-list
-IF NOT EXIST tmp\build MKDIR tmp\build
-COPY build\src\dird\*.c tmp\build
-ECHO %CD:\=/%/tmp/build/ficheriro1.txt>tmp\restore-list
-ECHO %CD:\=/%/tmp/build/ficheriro2.txt>>tmp\restore-list
-
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\incremental-2tape.1.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-
-ECHO ficheriro1.txt >tmp\build\ficheriro1.txt
-ECHO ficheriro2.txt >tmp\build\ficheriro2.txt
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\incremental-2tape.2.bscr >tmp\bconcmds
-CALL scripts\functions run_bconsole
-CALL scripts\bacula stop_bacula
-CALL scripts\bacula check_two_logs
-REM
-REM Delete .c files because we will only restore the txt files
-REM
-DEL tmp\build\*.c
-CALL scripts\bacula check_restore_tmp_build_diff
-CALL scripts\bacula end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory then create some
-# new files, do an Incremental and restore those two files.
-#
-TestName="incremental-tape"
-JobName=IncTape
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-
-echo "${cwd}/tmp/build" >/tmp/file-list
-if test ! -d ${cwd}/tmp/build ; then
- mkdir ${cwd}/tmp/build
-fi
-cp -p ${cwd}/build/src/dird/*.c ${cwd}/tmp/build
-cd ${cwd}/tmp
-echo "${cwd}/tmp/build/ficheriro1.txt" >restore-list
-echo "${cwd}/tmp/build/ficheriro2.txt" >>restore-list
-cd ${cwd}
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-
-echo "ficheriro1.txt" >${cwd}/tmp/build/ficheriro1.txt
-echo "ficheriro2.txt" >${cwd}/tmp/build/ficheriro2.txt
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-run level=Incremental job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=DDS-4
-7
-<${cwd}/tmp/restore-list
-
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-#
-# Delete .c files because we will only restored the txt files
-#
-rm -f tmp/build/*.c
-
-check_two_logs
-check_restore_tmp_build_diff
-end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label storage=File volume=TestVolume001
-label storage=File volume=TestVolume002
-run job=@JobName@ yes
-wait
-messages
-quit
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-@# Force Incremental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-run level=Differential job=@JobName@ yes
-wait
-messages
-quit
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-run level=Incremental job=@JobName@ yes
-wait
-messages
-quit
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-run level=Differential job=@JobName@ yes
-wait
-messages
-quit
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-run level=Incremental job=@JobName@ yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores storage=File file=<@topdir@/tmp/restore-list
-yes
-wait
-messages
-@output
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory then create some
-REM new files, do an Incremental and restore those two files.
-REM
-SET TestName=incremental-test
-SET JobName=Incremental
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/tmp/build>/tmp/file-list
-
-MKDIR tmp\build
-COPY build\src\dird\*.c tmp\build >nul 2>&1
-
-ECHO %CD:\=/%/tmp/build/ficheriro1.txt>tmp\restore-list
-ECHO %CD:\=/%/tmp/build/ficheriro2.txt>>tmp\restore-list
-
-CALL scripts\functions change_jobname CompressedTest %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\incremental-test.1.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-REM
-REM Now create two new files to be restored later
-REM
-bin\bsleep 1
-ECHO ficheriro1.txt >tmp\build\ficheriro1.txt
-COPY tmp\build\dird.c tmp\build\ficheriro2.txt >nul 2>&1
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\incremental-test.2.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-
-bin\bsleep 1
-touch tmp\build\ficheriro1.txt
-touch tmp\build\ficheriro2.txt
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\incremental-test.3.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-
-bin\bsleep 1
-
-COPY tmp\build\ficheriro2.txt tmp\build\1 >nul 2>&1
-sed -e "s;a;b;g" tmp\build\1 >tmp\build\ficheriro2.txt
-DEL tmp\build\1
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\incremental-test.4.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-
-bin\bsleep 1
-touch tmp\build\ficheriro1.txt
-touch tmp\build\ficheriro2.txt
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\incremental-test.3.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-
-bin\bsleep 1
-touch tmp\build\ficheriro1.txt
-touch tmp\build\ficheriro2.txt
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\incremental-test.3.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-
-bin\bsleep 1
-touch tmp\build\ficheriro1.txt
-touch tmp\build\ficheriro2.txt
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\incremental-test.3.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-bin\bsleep 1
-touch tmp\build\ficheriro1.txt
-touch tmp\build\ficheriro2.txt
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\incremental-test.5.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-REM
-REM Delete .c files because we will only restored the txt files
-REM
-DEL tmp\build\*.c
-CALL scripts\functions check_restore_tmp_build_diff
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the /lib directory
-# then restore it.
-#
-cwd=`pwd`
-bin/bacula stop 2>&1 >/dev/null
-cd bin
-./drop_bacula_tables >/dev/null 2>&1
-./make_bacula_tables >/dev/null 2>&1
-./grant_bacula_privileges 2>&1 >/dev/null
-cd ..
-
-scripts/cleanup-tape
-scripts/copy-tape-confs
-echo "/lib" >/tmp/file-list
-echo " "
-echo " "
-echo " === Starting lib-tape-root test ==="
-echo " "
-echo " "
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 Volume=TestVolume001 slot=0
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/original
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/restored
-cd ${cwd}/tmp
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% original >1
-sort <1 >original
-#
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% restored >1
-sort <1 >restored
-rm -f 1
-#
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/nul
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== lib-tape-root failed!!! ===== "
- echo " ===== lib-tape-root failed!!! ===== " >>test.out
- echo " "
-else
- echo " ===== lib-tape-root OK ===== "
- echo " ===== lib-tape-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-MUID=`/usr/bin/id -u`
-if [ $MUID != 0 ] ; then
- echo " "
- echo "You must be root to run this test."
- echo " ===== !!!! lib-test-root not run !!!! ===== "
- echo " ===== !!!! lib-test-root not run !!!! ===== " >>test.out
- echo " "
- exit 1
-fi
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-echo "/lib" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting /lib save/restore test ==="
-echo " "
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=File
-TestVolume001
-run job=NightlySave
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-lib-test lib >${cwd}/tmp/original
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-lib-test lib >${cwd}/tmp/restored
-cd ${cwd}/tmp
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% original >1
-sort <1 >original
-#
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% restored >1
-sort <1 >restored
-rm -f 1
-#
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/nul
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== !!!! lib-test-root failed !!!! ===== "
- echo " ===== !!!! lib-test-root failed !!!! ===== " >>test.out
- echo " "
-else
- echo " ===== lib-test-root OK ===== "
- echo " ===== lib-test-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory then migrate it
-REM to another device.
-REM
-REM This script uses the virtual disk autochanger
-REM
-SET TestName=migration-job-test
-SET JobName=MigrationJobSave
-
-CALL scripts\functions set_debug 0
-
-CALL config_out
-
-CALL scripts\cleanup
-CALL scripts\copy-migration-confs
-CALL scripts\prepare-two-disks
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-REM
-REM Note, we first backup into Pool Default,
-REM then Migrate into Pool Full.
-REM Pool Default uses Storage=File
-REM Pool Full uses Storage=DiskChanger
-
-REM Write out bconsole commands
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\migration-job-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory then migrate it
-REM to another device.
-REM
-REM Test migrating a job that spans two Volumes
-REM
-REM This script uses the virtual disk autochanger
-REM
-SET TestName=migration-jobspan-test
-SET JobName=MigrationJobSpanSave
-
-CALL scripts\functions set_debug 0
-
-CALL config_out
-
-CALL scripts\cleanup
-CALL scripts\copy-migration-confs
-CALL scripts\prepare-two-disks
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-COPY bin\bacula-sd.conf tmp\1
-sed "s;# Maximum File Size; Maximum File Size;" %CD%\tmp\1 >%CD%\bin\bacula-sd.conf
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-REM
-REM Note, we first backup into Pool Default,
-REM then Migrate into Pool Full.
-REM Pool Default uses Storage=File
-REM Pool Full uses Storage=DiskChanger
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\migration-jobspan-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory then migrate it
-REM to another device.
-REM
-REM This script uses the virtual disk autochanger
-REM
-SET TestName=migration-occupancy-test
-SET JobName=MigrationJobSave
-
-CALL scripts\functions set_debug 0
-
-CALL config_out
-
-CALL scripts\cleanup
-CALL scripts\copy-migration-confs
-CALL scripts\prepare-two-disks
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-REM
-REM Note, we first backup into Pool Default,
-REM then Migrate into Pool Full.
-REM Pool Default uses Storage=File
-REM Pool Full uses Storage=DiskChanger
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\migration-occupancy-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory then migrate it
-REM to another device.
-REM
-REM This script uses the virtual disk autochanger
-REM
-SET TestName=migration-time-test
-SET JobName=MigrationJobSave
-
-CALL scripts\functions set_debug 0
-
-CALL config_out
-
-CALL scripts\cleanup
-CALL scripts\copy-migration-confs
-CALL scripts\prepare-two-disks
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-REM
-REM Note, we first backup into Pool Default,
-REM then Migrate into Pool Full.
-REM Pool Default uses Storage=File
-REM Pool Full uses Storage=DiskChanger
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\migration-time-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-REM
-REM Run a backup of the Bacula build directory on two Volumes
-REM then migrate it to another device.
-REM
-REM This script uses the virtual disk autochanger
-REM
-SET TestName=migration-volume-test
-SET JobName=MigVolBackup
-
-CALL scripts\functions set_debug 0
-
-CALL config_out
-
-CALL scripts\cleanup
-CALL scripts\copy-migration-confs
-CALL scripts\prepare-two-disks
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-REM COPY bin\bacula-sd.conf tmp\1
-REM sed "s;# Maximum File Size; Maximum File Size;" tmp\1 >bin\bacula-sd.conf
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-REM
-REM Note, we first backup into Pool Default,
-REM then Migrate into Pool Full.
-REM Pool Default uses Storage=File
-REM Pool Full uses Storage=DiskChanger
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\migration-volume-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label storage=File volume=TestVolume001
-label storage=File volume=TestVolume002
-run job=@JobName@ yes
-wait
-messages
-quit
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-@# Force differental on the second Volume
-update volume=TestVolume001 VolStatus=Used
-run level=differental job=@JobName@ yes
-wait
-messages
-@output
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-run level=incremental job=@JobName@ yes
-wait
-messages
-@#
-@# Now do the queries
-@#
-query
-1
-ficheriro1.txt
-query
-2
-@topdir@/tmp/build/
-ficheriro1.txt
-localhost-fd
-query
-6
-TestVolume001
-query
-7
-1
-query
-8
-localhost-fd
-query
-9
-Default
-query
-10
-query
-11
-query
-12
-1
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores storage=File file=<@topdir@/tmp/restore-list
-yes
-wait
-messages
-@output
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory then create some
-REM new files, do a Differental then a bunch of query commands
-REM and finally restore the two files.
-REM
-SET TestName=query-test
-SET JobName=query
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/tmp/build >\tmp\file-list
-MKDIR tmp\build
-COPY build\src\dird\*.c tmp\build >nul 2>&1
-ECHO %CD:\=/%/tmp/build/ficheriro1.txt>tmp\restore-list
-ECHO %CD:\=/%/tmp/build/ficheriro2.txt>>tmp\restore-list
-
-CALL scripts\functions change_jobname CompressedTest %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\query-test.1.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-
-ECHO ficheriro1.txt >tmp\build\ficheriro1.txt
-ECHO ficheriro2.txt >tmp\build\ficheriro2.txt
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\query-test.2.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-
-ECHO ficheriro2.txt >tmp\build\ficheriro2.txt
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\query-test.3.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-REM
-REM Delete .c files because we will only restored the txt files
-REM
-DEL tmp\build\*.c
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_tmp_build_diff
-CALL scripts\functions end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label storage=File1 volume=TestVolume001
-label storage=File1 volume=TestVolume002
-label storage=File1 volume=TestVolume003
-update Volume=TestVolume001 volretention=10s
-update Volume=TestVolume001 maxvoljobs=1
-update Volume=TestVolume002 volretention=10s
-update Volume=TestVolume002 maxvoljobs=1
-update Volume=TestVolume003 volretention=10s
-update Volume=TestVolume003 maxvoljobs=1
-list volumes
-run job=@JobName@ storage=File1 level=full yes
-wait
-messages
-list volumes
-run job=@JobName@ storage=File1 level=full yes
-wait
-messages
-list volumes
-run job=@JobName@ storage=File1 level=full yes
-wait
-messages
-list volumes
-@sleep 10
-run job=@JobName@ storage=File1 level=full yes
-wait
-messages
-list volumes
-run job=@JobName@ storage=File1 level=full yes
-wait
-messages
-list volumes
-run job=@JobName@ storage=File1 level=full yes
-wait
-messages
-list volumes
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select storage=File1
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory but
-REM create three volumes and do six backups causing the
-REM volumes to be recycled, and cycling through the volumes
-REM twice. Tests maxvoljobs and volretention.
-REM
-SET TestName=recycle-test
-SET JobName=Recycle
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\recycle-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File1
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup four times, each with incremental then finally restore.
-# It should require at least 4 different bsrs.
-#
-TestName="relabel-tape"
-JobName=Relabeltape
-. scripts/functions
-set_debug 0
-
-scripts/cleanup-tape
-scripts/copy-tape-confs
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName level=Full yes
-wait
-messages
-add pool=Default
-0
-TestVolume002
-@# set status to append
-update volume=TestVolume001
-1
-.
-run job=NightlySave level=Full yes
-@sleep 20
-unmount
-unmount
-purge volume=TestVolume001
-relabel oldvolume=TestVolume001 volume=TestVolume003 slot=0 pool=Default
-list volumes
-mount
-messages
-wait
-run job=$JobName level=Full yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-
-
-echo "Backup done"
-#
-# now do several restores to ensure we cleanup between jobs
-#
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-@$out tmp/log2.out
-@#
-@# now unmount the tape and start two restores
-@# at the same time
-@#
-unmount storage=DDS-4
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-restore where=${cwd}/tmp/bacula-restores select
-unmark *
-mark *
-done
-yes
-mount storage=DDS-4
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bconsole
-
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape where the maximum tape file size is set to 1M
-# then restore a few files from it. Note, by setting the maximum
-# file size to 1M, it runs very slow. There are about 64 files that
-# are created during each of the two backups.
-#
-TestName="restore-by-file-tape"
-JobName=restorebyfile
-. scripts/functions
-set_debug 0
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-sed s%\^%${cwd}% ${cwd}/scripts/flist >${cwd}/tmp/restore2-list
-
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-run job=$JobName level=Full yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores storage=DDS-4 file=<${cwd}/tmp/restore2-list
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-dstat=0
-#
-# We need to stop and start Bacula to
-# test appending to a previously written tape
-#
-for i in `cat ${cwd}/tmp/restore2-list`; do
- diff $i ${cwd}/tmp/bacula-restores$i
- if [ $? != 0 ] ; then
- dstat=1
- fi
-done
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-run job=$JobName level=Full yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores
-7
-<${cwd}/tmp/restore2-list
-
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-#
-# Bacula was stopped, but we must restart it to
-# test appending to a previously written tape
-#
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-
-scripts/check_for_zombie_jobs storage=DDS-4
-bin/bacula stop 2>&1 >/dev/null
-for i in `cat ${cwd}/tmp/restore2-list`; do
- diff $i ${cwd}/tmp/bacula-restores$i
- if [ $? != 0 ] ; then
- dstat=1
- fi
-done
-
-end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label storage=File volume=TestVolume001
-run job=@JobName@ yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores storage=File
-7
-<@topdir@/tmp/restore-list
-
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory using the compressed option
-REM then restore it.
-REM
-
-SET TestName=restore-by-file-test
-SET JobName=restorebyfile
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/tmp/build >\tmp\file-list
-MKDIR tmp\build
-COPY build\src\dird\*.c tmp\build >nul 2>&1
-DIR /b tmp\build >tmp\1
-sed -e "s;^;%CD:\=/%/tmp/build/;" tmp\1 >tmp\restore-list
-DEL tmp\1
-
-CALL scripts\functions change_jobname CompressedTest %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\restore-by-file-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_tmp_build_diff
-CALL scripts\functions end_test
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-label storage=File volume=TestVolume001
-run job=@JobName@ yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-sql
-select * from JobMedia;
-
-restore bootstrap=@topdir@/tmp/rbn.bsr where=@topdir@/tmp/bacula-restores storage=File
-7
-<@topdir@/tmp/restore-list
-
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a backup of the full bacula build directory, but with the
-REM Maximum File Size set. Then do a restore of a few files to kick in
-REM disk seeking (not yet enabled), and ensure that the restored files
-REM match. Even though disk seeking is not yet enabled, this is a good test,
-REM and once it is enabled, this will test it.
-REM
-SET TestName=restore-disk-seek-test
-SET JobName=restore-disk-seek
-
-CALL scripts\functions set_debug 1
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/tmp/build >\tmp\file-list
-
-IF EXIST tmp\build RD /s /q tmp\build
-MKDIR tmp\build
-
-REM Copy only the .c files (to be restored)
-REM set files to "*.c" for all c files
-SET files=ua_tree.c ua_update.c
-REM SET files=*.c
-FOR %%i in ( %files% ) DO COPY build\src\dird\%%i tmp\build >nul 2>&1
-DIR /b tmp\build >tmp\1
-sed -e "s;^;%CD:\=/%/tmp/build/;" tmp\1 >tmp\restore-list
-
-REM At this point restore-list contains the list
-REM of files we will restore
-DEL tmp\1
-
-REM Now backup *everything*
-IF EXIST tmp\build RD /s /q tmp\build
-MKDIR tmp\build
-COPY build\src\dird\* tmp\build >nul 2>&1
-REM Enable MaximumFileSize
-COPY bin\bacula-sd.conf tmp\1 >nul 2>&1
-sed "s;# Maximum File Size; Maximum File Size;" tmp\1 >bin\bacula-sd.conf
-
-CALL scripts\functions change_jobname CompressedTest %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\restore-disk-seek-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-REM Now setup a control directory of only what we *should* restore
-RD /s /q tmp\build
-MKDIR tmp\build
-FOR %%i in ( %files% ) DO COPY build\src\dird\%%i tmp\build >nul 2>&1
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_tmp_build_diff
-CALL scripts\functions end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label storage=File volume=TestVolume001
-run job=@JobName@ yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores storage=File file=<@topdir@/tmp/restore2-list
-yes
-wait
-messages
-@output
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory using the compressed option
-REM then restore a few selected files.
-REM
-SETLOCAL ENABLEDELAYEDEXPANSION
-SET TestName=restore2-by-file-test
-SET JobName=restore2byfile
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-sed -e "s;^;%CD:\=/%;" scripts/flist >tmp\restore2-list
-
-CALL scripts\functions change_jobname CompressedTest %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\restore2-by-file-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-SET dstat=0
-FOR /f %%i IN ( tmp\restore2-list ) DO (
- SET SUBDIR=%%i
- diff %%i tmp/bacula-restores/!SUBDIR::=!
- IF %ERRORLEVEL% NEQ 0 SET dstat=1
-)
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Test if Bacula can automatically create a Volume label.
-#
-
-TestName="runscript-test"
-
-. scripts/functions
-set_debug 0
-copy_test_confs
-
-rm -f bin/bacula-dir.conf
-/bin/cp -f scripts/bacula-dir.conf.testrunscript bin/bacula-dir.conf
-
-echo "${cwd}/build" >/tmp/file-list
-
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-label volume=TestVolume001
-@#setdebug level=100 storage=File
-@output tmp/log.RUN2.out
-run job=RUN_FD_WARNING yes
-wait
-@sleep 5
-messages
-run job=RUN_ALL_OK yes
-wait
-@sleep 5
-messages
-run job=RUN_FD_FAILED yes
-wait
-@sleep 5
-messages
-run job=RUN_DIR_FAILED yes
-wait
-@sleep 5
-messages
-st dir
-quit
-END_OF_DATA
-
-
-bin/bacula start
-cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf &> tmp/log.RUN1.out
-
-stop_bacula
-
-if grep -q 'dir: BeforeJob: run command "/bin/echo RunBeforeJob"' tmp/log.RUN1.out &&
- grep -q 'fd: ClientRunBeforeJob: ClientRunBeforeJob' tmp/log.RUN1.out &&
- grep -q 'fd: ClientAfterJob: run command "/bin/echo ClientRunAfterJob' tmp/log.RUN1.out &&
- grep -q 'dir: AfterJob: run command "/bin/echo RunAfterJob' tmp/log.RUN1.out
-then
- [ "$debug" -eq 1 ] && echo RUN_ALL_OK ok
-else
- echo "RUN_ALL_OK in error"
- rstat=1
-fi
-
-if grep -q 'dir: BeforeJob: run command "/bin/false RUN_DIR_FAILED"' tmp/log.RUN1.out &&
- grep -q 'dir: BeforeJob: RunAfterFailedJob' tmp/log.RUN1.out &&
- true # grep -q 'Backup OK -- with warnings' tmp/log.RUN1.out
-then
- [ "$debug" -eq 1 ] && echo RUN_DIR_FAILED ok
-else
- echo "RUN_DIR_FAILED in error"
- rstat=1
-fi
-
-if grep -q 'fd: ClientBeforeJob: run command "/bin/false RUN_FD_FAILED1"' tmp/log.RUN1.out &&
- grep -q 'fd: ClientBeforeJob: run command "/bin/false RUN_FD_FAILED2"' tmp/log.RUN1.out &&
- grep -q 'dir: AfterJob: run command "/bin/echo RunAfterFailedJob"' tmp/log.RUN1.out
-then
- [ "$debug" -eq 1 ] && echo RUN_FD_FAILED ok
-else
- echo "RUN_FD_FAILED in error"
- rstat=1
-fi
-
-if grep -q 'fd: ClientBeforeJob: run command "/bin/false RUN_FD_WARNING"' tmp/log.RUN1.out &&
- grep -q 'Backup OK -- with warnings' tmp/log.RUN1.out
-then
- [ "$debug" -eq 1 ] && echo RUN_FD_WARNING ok
-else
- echo "RUN_FD_WARNING in error"
- rstat=1
-fi
-
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 pool=Scratch drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 pool=Scratch drive=0
-update Volume=TestVolume001 MaxVolBytes=2000000 pool=Scratch drive=0
-update Volume=TestVolume001 inchanger=no pool=Scratch drive=0
-@#setdebug level=200 storage=DDS-4
-llist volume=TestVolume001
-llist volume=TestVolume002
-run job=@JobName@ yes
-wait
-messages
-list volumes
-llist volume=TestVolume001
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory
-REM to two tapes where the maximum tape file size is set to 1M
-REM Note, this test simulates the tape filling and writing to
-REM the next tape. One minor wrinkle: we create the two tapes
-REM in the Scratch pool, so they should be switched to the Default
-REM Pool automatically.
-REM We set TestVolume001 to not in the changer, so the algorithm
-REM should find TestVolume002 and use it rather than blocking.
-REM
-REM Note we use the viritual disk autochanger
-REM
-SET TestName=scratch-pool-test
-SET JobName=scratch-pool
-
-CALL scripts\functions set_debug 0
-
-CALL config_out
-IF "%AUTOCHANGER%" == "nul" (
- ECHO two-volume-test skipped. No autochanger.
- EXIT /b 1
-)
-
-CALL scripts\cleanup
-CALL scripts\copy-2disk-confs >nul 2>&1
-CALL scripts\prepare-two-disks
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-COPY bin\bacula-sd.conf tmp\1 >nul 2>&1
-sed -e "s;# Maximum File Size; Maximum File Size;g" tmp\1 >bin\bacula-sd.conf
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-REM Write out bconsole commands
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\scratch-pool-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=DDS-4
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-run job=@JobName@ storage=File yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
+++ /dev/null
-REM
-REM Create a 60MB file with random bytes. Back it up to 6 Volumes
-REM each constrained to 10MB using the automatic labeling feature.
-REM
-SET TestName=six-vol-test
-SET JobName=SixVol
-
-CALL scripts\functions set_debug 0
-
-CALL scripts\cleanup
-CALL scripts\copy-testa-confs >nul 2>&1
-ECHO %CD:\=/%/tmp/largefile >\tmp\file-list
-
-ECHO Creating a 60MB file with bacula-dir data ...
-tools\dd if=bin/bacula-dir.exe of=%CD:\=/%/tmp/1 bs=1024 count=500 >nul 2>&1
-COPY /b %CD%\tmp\1+%CD%\tmp\1+%CD%\tmp\1+%CD%\tmp\1+%CD%\tmp\1 %CD%\tmp\2 >nul 2>&1
-DEL %CD%\tmp\1
-COPY /b %CD%\tmp\2+%CD%\tmp\2 %CD%\tmp\3 >nul 2>&1
-DEL %CD%\tmp\2
-COPY /b %CD%\tmp\3+%CD%\tmp\3+%CD%\tmp\3+%CD%\tmp\3+%CD%\tmp\3+%CD%\tmp\3 %CD%\tmp\4 >nul 2>&1
-COPY /b %CD%\tmp\3+%CD%\tmp\3+%CD%\tmp\3+%CD%\tmp\3+%CD%\tmp\3+%CD%\tmp\4 %CD%\tmp\largefile >nul 2>&1
-DEL %CD%\tmp\3 %CD%\tmp\4
-
-CALL scripts\functions change_jobname MultiVol %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\six-vol-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-diff tmp\largefile tmp\bacula-restores\%CD::=%\tmp\largefile >nul 2>&1
-SET dstat=%ERRORLEVEL%
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape where the maximum tape file size is set to 1M
-#
-TestName="small-file-size-tape"
-JobName=smallfilesize
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1
-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-setdebug level=2 storage=DDS-4
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=DDS-4
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label storage=File1 volume=TestVolume004
-label storage=File1 volume=TestVolume003
-label storage=File1 volume=TestVolume002
-label storage=File1 volume=TestVolume001
-update Volume=TestVolume004 MaxVolBytes=3000000
-update Volume=TestVolume003 MaxVolBytes=3000000
-update Volume=TestVolume002 MaxVolBytes=3000000
-run job=@JobName@ storage=File1 yes
-wait
-list volumes
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select storage=File1
-unmark *
-mark *
-done
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory but
-REM split the archive into four volumes, two of which are
-REM totally full. I.e. make sure that bsr selects all tapes
-REM including those fully spanned.
-REM
-SET TestName=span-vol-test
-SET JobName=SpanVol
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\span-vol-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File1
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label storage=File volume=TestVolume001
-run job=SparseCompressedTest yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select all storage=File done
-yes
-wait
-messages
-@output
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory using the Sparse option
-REM then restore it.
-REM
-SET TestName=sparse-compressed-test
-SET JobName=Sparse-conpressed
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\sparse-compressed-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label storage=File volume=TestVolume001
-run job=@JobName@ yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory using the Sparse option
-REM then restore it.
-REM
-SET TestName=sparse-test
-SET JobName=SparseTest
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\sparse-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-COPY nul test.out >nul 2>&1
-DEL bin\working\* 2>&1
+++ /dev/null
-#!/bin/sh
-#
-# Test for a tape truncation bug.
-#
-TestName="truncate-bug-tape"
-JobName=truncatebug
-. scripts/functions
-
-set_debug 0
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default
-@# do a bunch of saves so we have 12 files on the tape
-run job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-run level=Full job=$JobName yes
-@#setdebug level=100 storage=DDS-4
-wait
-messages
-quit
-END_OF_DATA
-
-run_bacula
-scripts/check_for_zombie_jobs storage=DDS-4
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log2.out
-@#
-@# now do a restore
-@#
-restore where=${cwd}/tmp/bacula-restores storage=DDS-4
-3
-@# select JobId=4 (i.e. file five on the tape)
-4
-cd ${cwd}/build
-@# mark a single file
-mark configure
-done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-
-run_bconsole
-scripts/check_for_zombie_jobs storage=DDS-4
-
-# Now write to tape one more time
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log3.out
-run level=Full job=$JobName yes
-wait
-messages
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-grep "^ Termination: *Backup OK" tmp/log3.out 2>&1 >/dev/null
-dstat=$?
-end_test
+++ /dev/null
-setdebug level=15 storage=File
-@output nul
-messages
-@output nul
-estimate job=@JobName@ listing
-estimate job=@JobName@ listing
-estimate job=@JobName@ listing
-messages
-@@out@ tmp/log1.out
-label storage=File volume=TestVolume001
-run job=@JobName@ yes
-wait
-messages
-quit
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-run job=@JobName@
-yes
-wait
-messages
-@#
-@# now do several restores to ensure we cleanup between jobs
-@#
-@output nul
-restore where=@topdir@/tmp/bacula-restores select all storage=File done
-yes
-wait
-restore where=@topdir@/tmp/bacula-restores select all storage=File done
-yes
-wait
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@output
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory using the compressed option
-REM then backup a second time and finally restore it
-REM
-SET TestName=two-jobs-test
-SET JobName=Two-Jobs
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions change_jobname CompressedTest %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\two-jobs-test.1.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File
-
-ECHO Backup 1 done
-tools\touch build\src\dird\*.c
-
-REM
-REM run a second job
-REM
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\two-jobs-test.2.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bconsole
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# This is Arno's test. It uses two pools, two tapes, and
-# an autochanger. Note, the Director has three Pools in its
-# conf: Default, Full, and Inc. Default is used in the
-# NightlySave job by default. What is backed up is what
-# is in /tmp/file-list, which is by default the Bacula
-# source code (i.e. the build directory).
-#
-TestName="two-pool-tape"
-JobName=twopooltape
-. scripts/functions
-set_debug 0
-
-. config.out
-if test x${AUTOCHANGER} = x/dev/null ; then
- echo "two-pool-tape test skipped. No autochanger."
- exit
-fi
-
-scripts/cleanup
-scripts/copy-2tape-confs
-echo "Prepare two tapes"
-scripts/prepare-two-tapes
-echo "Done prepare two tapes"
-
-# Make a relatively large backup set 5 x source code directory
-echo "${cwd}/build" >/tmp/file-list
-echo "${cwd}/build" >>/tmp/file-list
-echo "${cwd}/build" >>/tmp/file-list
-echo "${cwd}/build" >>/tmp/file-list
-echo "${cwd}/build" >>/tmp/file-list
-
-start_test
-
-# Write out bconsole commands to a file
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 pool=Full drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 pool=Default drive=0
-list volumes
-@# Start job with Client run before and sleep
-run job=NightlySave1 level=Full pool=Default yes
-run job=NightlySave1 level=Full pool=Default yes
-run job=NightlySave1 level=Full pool=Default yes
-@# wait between starting jobs
-@sleep 60
-@#setdebug level=100 storage=DDS-4
-run job=NightlySave2 level=Full pool=Full yes
-run job=NightlySave2 level=Full pool=Full yes
-run job=NightlySave2 level=Full pool=Full yes
-@sleep 10
-messages
-@sleep 10
-messages
-@sleep 10
-status storage=DDS-4
-messages
-wait
-list volumes
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-check_restore_diff
-end_test
+++ /dev/null
-@output nul
-messages
-@@out@ tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 pool=Full drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 pool=Default drive=0
-list volumes
-@# Start job with Client run before and sleep
-run job=NightlySave1 level=Full pool=Default yes
-run job=NightlySave1 level=Full pool=Default yes
-run job=NightlySave1 level=Full pool=Default yes
-@# wait between starting jobs
-@sleep 60
-@#setdebug level=100 storage=DDS-4
-run job=NightlySave2 level=Full pool=Full yes
-run job=NightlySave2 level=Full pool=Full yes
-run job=NightlySave2 level=Full pool=Full yes
-@sleep 10
-messages
-@sleep 10
-messages
-@sleep 10
-status storage=DDS-4
-messages
-wait
-list volumes
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM This is Arno's test. It uses two pools, two tapes, and
-REM an autochanger. Note, the Director has three Pools in its
-REM conf: Default, Full, and Inc. Default is used in the
-REM NightlySave job by default. What is backed up is what
-REM is in /tmp/file-list, which is by default the Bacula
-REM source code (i.e. the build directory).
-REM
-REM Note, we use the virtual disk autochanger.
-REM
-SET TestName=two-pool-test
-SET JobName=Two-pool
-
-CALL scripts\functions set_debug 0
-
-CALL config_out
-
-CALL scripts\cleanup
-CALL scripts\copy-2disk-confs >nul 2>&1
-CALL scripts\prepare-two-disks
-
-REM Make a relatively large backup set 5 x source code directory
-REM Reduced to 1 for portable
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions start_test
-
-REM Write out bconsole commands to a file
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\two-pool-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=DDS-4
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-label storage=File1 volume=TestVolume002
-label storage=File1 volume=TestVolume001
-update Volume=TestVolume002 MaxVolBytes=3000000
-run job=@JobName@ storage=File1 yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select all storage=File1 done
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory but
-REM split the archive into two volumes
-REM
-SET TestName=two-vol-test
-SET JobName=TwoVol
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\two-vol-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=File1
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-@@out@ nul
-messages
-@@out@ @topdir@/tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 pool=Default drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 pool=Default drive=0
-update Volume=TestVolume001 MaxVolBytes=3000000 pool=Default drive=0
-@#setdebug level=1000 client
-run job=@JobName@ yes
-wait
-messages
-quit
+++ /dev/null
-@@out@ nul
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory
-REM to two tapes where the maximum tape file size is set to 1M
-REM Note, this test simulates the tape filling and writing to
-REM the next tape.
-REM
-SET TestName=two-volume-tape
-SET JobName=twovoltape
-CALL scripts\functions set_debug 0
-
-CALL config_out
-IF "%AUTOCHANGER%" == "nul" (
- ECHO two-volume-tape test skipped. No autochanger.
- EXIT /b 1
-)
-
-CALL scripts\cleanup
-CALL scripts\copy-2tape-confs
-CALL scripts\prepare-two-tapes
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-COPY bin\bacula-sd.conf tmp\1
-sed -e "s%# Maximum File Size% Maximum File Size%g" >bin\bacula-sd.conf
-
-CALL scripts\functions change_jobname %JobName%
-CALL scripts\functions start_test
-
-REM Write out bconsole commands
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\two-volume-tape.1.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=DDS-4
-CALL scripts\functions stop_bacula
-
-mt -f %TAPE_DRIVE% rewind
-mtx -f %AUTOCHANGER% unload
-bin\bsleep 15
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\two-volume-tape.2.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=DDS-4
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=1 pool=Default drive=0
-label storage=DDS-4 volume=TestVolume002 slot=2 pool=Default drive=0
-update Volume=TestVolume001 MaxVolBytes=3000000 pool=Default drive=0
-@#setdebug level=1000 client
-run job=@JobName@ yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@@out@ tmp/log2.out
-restore where=@topdir@/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-@@out@
-quit
-
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory
-REM to two tapes where the maximum tape file size is set to 1M
-REM Note, this test simulates the tape filling and writing to
-REM the next tape.
-REM
-REM Note we use the viritual disk autochanger
-REM
-SET TestName=two-volume-test
-SET JobName=TwoVolume
-CALL scripts\functions set_debug 1
-CALL config_out
-
-CALL scripts\cleanup
-CALL scripts\copy-2disk-confs >nul 2>&1
-CALL scripts\prepare-two-disks
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-COPY bin\bacula-sd.conf tmp\1
-sed -e "s;# Maximum File Size; Maximum File Size;g" tmp\1 >bin\bacula-sd.conf
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-REM Write out bconsole commands
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\two-volume-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-CALL scripts\functions check_for_zombie_jobs storage=DDS-4
-CALL scripts\functions stop_bacula
-
-CALL scripts\functions check_two_logs
-CALL scripts\functions check_restore_diff
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the /usr directory
-# then restore it.
-#
-cwd=`pwd`
-scripts/copy-tape-confs
-scripts/cleanup-tape
-echo "/usr" >/tmp/file-list
-
-echo " "
-echo " "
-echo " === Starting usr-tape-root test ==="
-echo " "
-echo " "
-
-bin/bacula start 2>&1 >/dev/null
-bin/bconsole -c bin/bconsole.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output tmp/log1.out
-label storage=DDS-4 Volume=TestVolume001 slot=0
-run job=NightlySave yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@output tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select all done
-yes
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop 2>&1 >/dev/null
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/original
-cd ${cwd}/tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/restored
-cd ${cwd}/tmp
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% original >1
-sort <1 >original
-#
-sed s%.*lib/kbd/consolefonts$%lib/kbd/consolefonts% restored >1
-sort <1 >restored
-rm -f 1
-#
-cd ${cwd}
-diff tmp/original tmp/restored 2>&1 1>/dev/nul
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== !!!! usr-tape-root failed !!!! ===== "
- echo " ===== !!!! usr-tape-root failed !!!! ===== " >>test.out
- echo " "
-else
- echo " ===== usr-tape-root OK ===== "
- echo " ===== usr-tape-root OK ===== " >>test.out
- scripts/cleanup
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then verify the catalog.
-#
-TestName="verify-vol-tape"
-JobName=VerifyVol
-. scripts/functions
-set_debug 0
-
-copy_tape_confs
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-setdebug level=1 storage=DDS-4 sd
-label storage=DDS-4 volume=TestVolume001 pool=Default
-run job=$JobName yes
-wait
-messages
-@#
-@# now do a verify volume
-@#
-@$out ${cwd}/tmp/original
-run job=VerifyTape pool=Default
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-
-sleep 2
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-grep "^ Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
-bstat=$?
-grep "^ Termination: *Verify OK" ${cwd}/tmp/original 2>&1 >/dev/null
-rstat=$?
-dstat=0
-end_test
+++ /dev/null
-@@out@ nul
-messages
-@@out@ tmp/log1.out
-setdebug level=1 storage=File sd
-label storage=File volume=TestVolume001
-run job=@JobName@ yes
-wait
-messages
-@#
-@# now do a verify volume
-@#
-@@out@ @topdir@/tmp/original
-run job=VerifyVolume
-yes
-wait
-messages
-@@out@
-quit
+++ /dev/null
-REM
-REM Run a simple backup of the Bacula build directory
-REM then verify the catalog.
-REM
-SET TestName=verify-vol-test
-SET JobName=VerifyVol
-
-CALL scripts\functions set_debug 0
-CALL scripts\functions copy_test_confs
-
-ECHO %CD:\=/%/build >\tmp\file-list
-
-CALL scripts\functions change_jobname NightlySave %JobName%
-CALL scripts\functions start_test
-
-sed -e "s;@JobName@;%JobName%;g" -e "s;@out@;%out%;g" -e "s;@topdir@;%CD:\=/%;g" tests\verify-vol-test.bscr >tmp\bconcmds
-
-CALL scripts\functions run_bacula
-
-bin\bsleep 2
-CALL scripts\functions check_for_zombie_jobs storage=File
-CALL scripts\functions stop_bacula
-
-grep "^ Termination: *Backup OK" tmp\log1.out 2>&1 >nul
-SET bstat=%ERRORLEVEL%
-grep "^ Termination: *Verify OK" tmp\original 2>&1 >nul
-SET rstat=%ERRORLEVEL%
-SET dstat=0
-CALL scripts\functions end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-TestName="weird-files-test"
-JobName=wierd-files
-. scripts/functions
-set_debug 0
-
-if test ! -d weird-files ; then
- echo " "
- echo "Weird files not configured. Test not run."
- exit 0
-fi
-
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-change_jobname NightlySave $JobName
-#
-# Note, we save the weird-files directory twice on purpose
-# because this causes problems with hard linked files
-# that are only saved once. In 1.33, Bacula now deals
-# with this situation.
-#
-echo "${cwd}/weird-files" >/tmp/file-list
-echo "${cwd}/weird-files" >>/tmp/file-list
-
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File
-TestVolume001
-run job=$JobName
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=${cwd}/tmp/bacula-restores select storage=File
-unmark *
-mark *
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-stop_bacula
-
-${cwd}/bin/testls weird-files | sort >${cwd}/tmp/original
-cd tmp/bacula-restores${cwd}
-${cwd}/bin/testls weird-files | sort >${cwd}/tmp/restored
-cd ${cwd}
-
-check_two_logs
-diff ${cwd}/tmp/original ${cwd}/tmp/restored 2>&1 >/dev/null
-dstat=$?
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-TestName="weird-files2-test"
-JobName=weird-files2
-. scripts/functions
-set_debug 0
-
-if test ! -d weird-files ; then
- echo " "
- echo "weird files not configured. Test not run."
- exit 0
-fi
-cwd=`pwd`
-scripts/cleanup
-scripts/copy-test-confs
-rm -rf weird-files2
-cp -Rp weird-files weird-files2
-echo "${cwd}/weird-files2" >/tmp/file-list
-
-change_jobname NightlySave $JobName
-start_test
-
-bin/testls weird-files2 >${cwd}/tmp/original
-
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@$out tmp/log1.out
-label storage=File volume=TestVolume001
-run job=$JobName yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=File
-#
-# Now mess up the a hard link, and a soft link
-#
-cd weird-files2
-rm -f hard-file2
-ln hard-file3 hard-file2
-rm -f soft-file2
-ln -s soft-file3 soft-file2
-cd ${cwd}
-cat <<END_OF_DATA >tmp/bconcmds
-@$out /dev/null
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where= storage=File
-5
-unmark *
-mark *
-done
-yes
-wait
-messages
-@$out
-quit
-END_OF_DATA
-
-run_bconsole
-check_for_zombie_jobs storage=File
-stop_bacula
-
-bin/testls weird-files2 >${cwd}/tmp/restored
-
-check_two_logs
-diff ${cwd}/tmp/original ${cwd}/tmp/restored 2>&1 >/dev/null
-dstat=$?
-
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape then restore it, we do that twice to ensure that
-# we can correctly append to a tape.
-#
-TestName="win32-backup-tape"
-JobName=win32tape
-. scripts/functions
-set_debug 0
-
-scripts/copy-win32-confs
-scripts/cleanup-tape
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_jobname $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default drive=0
-run job=$JobName yes
-@sleep 10
-status storage=DDS-4
-@sleep 30
-messages
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=c:/tmp/bacula-restores select all storage=DDS-4 done
-yes
-wait
-messages
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-# no diff for now
-dstat=0
-end_test
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# to a tape then restore it, we do that twice to ensure that
-# we can correctly append to a tape.
-#
-TestName="win32-to-linux-tape"
-JobName=AutoLabel
-. scripts/functions
-set_debug 1
-
-scripts/copy-win32-confs
-scripts/cleanup-tape
-
-echo "${cwd}/build" >/tmp/file-list
-
-change_job $JobName
-start_test
-
-cat <<END_OF_DATA >tmp/bconcmds
-@output /dev/null
-messages
-@$out tmp/log1.out
-label storage=DDS-4 volume=TestVolume001 slot=0 pool=Default drive=0
-run job=NightlySave yes
-@sleep 10
-status storage=DDS-4
-@sleep 30
-messages
-wait
-messages
-@#
-@# now do a restore
-@#
-@$out tmp/log2.out
-restore where=/tmp/bacula-restores client=Tibs select all storage=DDS-4 done
-yes
-wait
-messages
-END_OF_DATA
-
-run_bacula
-check_for_zombie_jobs storage=DDS-4
-stop_bacula
-
-check_two_logs
-# No diff for the moment
-dstat=0
-end_test