\end{longtable}
-The {\bf JobMedia} table contains one entry for each volume written for the
-current Job. If the Job spans 3 tapes, there will be three JobMedia records,
-each containing the information to find all the files for the given JobId on
-the tape.
+The {\bf JobMedia} table contains one entry at the following: start of
+the job, start of each new tape file, start of each new tape, end of the
+job. Since by default, a new tape file is written every 2GB, in general,
+you will have more than 2 JobMedia records per Job. The number can be
+varied by changing the "Maximum File Size" specified in the Device
+resource. This record allows Bacula to efficiently position close to
+(within 2GB) any given file in a backup. For restoring a full Job,
+these records are not very important, but if you want to retrieve
+a single file that was written near the end of a 100GB backup, the
+JobMedia records can speed it up by orders of magnitude by permitting
+forward spacing files and blocks rather than reading the whole 100GB
+backup.
+
+
\
-Kern;;;2005/12/06;;;12:30
+Kern;;;2006/01/06;;;12:30
Bacula is now able to accept direct donations, and as of
7 December 2005, we have received the following:
$100 Pontis Corporation, Pavlo Tabashov
$ 20 Jan Kesten
$100 Anonymous
- $442 GDC A Kendall, Dominic Marks
+ $442 Graphical Data Capture Ltd
$ 65 Jim Barlow
Total $744.89 After PayPal fees are deducted
Many thanks to these Bacula supporters.
+Payments made:
+ Amount: To/for:
+ $100 OSDN (Source Forge) hosting Bacula
+
;;;
Kern;;;2005/12/06;;;16:30
-Kern;;;2005/11/15;;;14:30
-The Bacula Version 1.38.1 tar file is released to Source Forge.
+Kern;;;2006/01/16;;;14:30
+The Bacula Version 1.38.3 tar file is released to Source Forge.
- Release Notes for Bacula 1.38.1
- Bacula code: Total files = 420 Total lines = 138,440 (*.h *.c *.in)
+ Release Notes for Bacula 1.38.3
+
+ Bacula code: Total files = 424 Total lines = 140,955 (*.h *.c *.in)
20,440 additional lines of code since version 1.36.3
-Changes since 1.38.0 (i.e. change found in version 1.38.1):
+Changes to 1.38.3:
+- This is mainly a bug release fix. In addition, the multiple drive
+ reservation algorithm has been rewritten.
+- In addition, the method of handling waiting for tapes to be
+ mounted and the mount messages has been modified.
+ (the above two items are a potential source of problems).
+- Simplify code in askdir.c that waits for creating an appendable
+ volume so that it can handle multiple returns from the wait code.
+- Modify the wait code to permit multiple returns.
+- Return a zero when "autochanger drives" is called and
+ it is not an autochanger.
+- Make rewind_dev() a method taking a DCR as an argument.
+ This permits closing and reopening the drive if the
+ rewind fails as happens if the drive was loaded while the
+ file descriptor was open. This refreshes the file descriptor.
+- Remove the ST_OPENED flag and always rely on fd < 0 for knowing
+ if the device is open or not. This should eliminate
+ Arnos problem.
+- Return error if reserve cannot find at least one suitable device.
+- Make wait_for_sysop() return correct state information.
+- Fix Win32 state file problem. write was not using compat
+ code. This should fix bug #500.
+- Modify gui on command to set only GUI mode and not batch.
+- Modify .messages command to always print messages regardless
+ of the mode.
+- If GUI mode is on, suppress automatic printing of
+ You have messages.
+- Modify restore command in wx-console to set gui on and to use
+ only .messages instead of messages. Hopefully this fixes bug
+ #514.
+- Implement load balancing code with multiple drive autochangers.
+- Rewrite reservation algorithm again. Rename variables to be
+ more logical, add HEARTBEAT with Director, allow cancel of
+ jobs stuck in reservation, add last resourt any_drive.
+- Fix seg fault if user labels a drive directly bug #513
+- Remove quotes around Version as it breaks things.
+- Merge in Aleksandar Milivojevic's mods to the spec file.
+- Apply sparse code fix for raw drives and fifos. Bug 506
+- Thorsten fixed Unicode cd problem with wx-console bug 505.
+- Correct reservation system to do a last ditch try
+ for any mounted volume, then anyone anywhere.
+- Updates to ssh-tunnel from Joshua Kugler.
+- Added a report.pl program from Jonas Bjorklund.
+- Simplify the O_NONBLOCK open() code for tape drives,
+ and always open nonblocking.
+- Do not wait for open() if EIO returned (shouldn't happen).
+- Eliminate 3 argument to tape open().
+- Correct the slot # edited in the 3995 Bad autochanger unload
+ message.
+- With -S on bscan (show progress) do not divide by zero.
+- Make cancel pthread_cond_signal() pthread_cond_broadcast().
+- When dcr is freed, also broadcast dev->wait_next_vol signal.
+- Remove unused code in wait_for_device.
+- Make wait_for_device() always return after 60 seconds of wait.
+- Use localhost if no network configured
+- Eliminated duplicate MaxVolBytes in cat update -- bug 509.
+- Update specs to include mysql4 define.
+- Return rec->FileIndex in dcr->VolLastIndex for normal
+ and partial records in read_record(). This allows bscan
+ to get FileIndex at EOT correct.
+- Fix butil.c to correctly set dcr -- fixes seg fault in bls.
+- Apply patch supplied by user (slightly modified) to fix
+ correct detection of holes in block devices and FIFOs.
+ Bug # 506.
+- Apply patch supplied by user (slightly modified)
+ to fix SD hang with multiple pools and bad client
+ IP. Fixes bug # 508.
+- Add nagios plugin to the examples directory. Submitted by
+ Christian Masopust.
+- Remove warning message about multiple saves of hardlinked files
+ from find_one.c as it can generate too many warning messages.
+- Reset timeout values before select() per patch from
+ Frank Sweetser for problems with non-blocking sockets.
+- Unlink the state file if either reading or writing it gets
+ errors. Hopefully this will fix Win32 exit problems.
+- Get next volume from Scratch pool before creating a volume.
+- Set new Pool defaults in Vol when moved from Scratch Pool.
+- Remove argument from create_bacula_database for SQLite as it
+ caused an error.
+- Fix reservation so that mutexes are properly applied.
+- Rework reservation algorithm so that two drives can be used
+ at the same time.
+- Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
+ If this patch is applied, the number of days can be specified with
+ "list nextvol days=xx"
+ or
+ "status dir days=xx"
+ My use case is to be able to preview the next scheduled job (and the
+ next tape to be used) on fridays if there are no scheduled jobs during
+ the weekend.
+- Fix font code in gnome2 console user patch. Fixes bug #501.
+- Fix malformatted bnet error message that caused seg fault
+ fixes bug 502
+- Applied user patch to improve README.vc8 in src/win32.
+- Ensure that StorageId is stored in Media record when ever possible.
+- Remove old code from winservice.cpp
+- Break on error in scan.
+- Fix typo in signal.c
+- Separate read/write DCR in SD. Add jcr->read_dcr.
+- Cleanup how find_device() works.
+- Remove abs() in bfile.c so that it compiles on Solaris. Bug #491.
+
+Changes to 1.38.2:
+- Fix crash in tray-monitor when daemon disconnects. Bug #479.
+- Fix bnet-server bug found on OpenBSD. Bug #486
+- Fix cancel failure bug. Bug #481
+- Fix failure when Pool name has spaces. Bug #487
+- Fix SD crash in autochanger code. Mutex failure. Bug #488
+- Fix a couple of free()s in src/filed/acl.c
+- Fix memory overrun in bfile.c in building OS X resource
+ fork filename. Bug #489
+- Add Pool name to SD status output.
+- Add Python install dir for Solaris to configure. Bug #492
+
+Changes to 1.38.1:
- Corrected ACL for Solaris (David Duchscher and Attila Fulop).
- Add bacula_mail_summary.sh to examples directory. It makes
a single email summary of any number of jobs. Submitted
required only if you do not want the default /usr/share.
Items to note!!!
+- The Storage daemon now keeps track of what tapes it is using
+ (was not the case in 1.36.x). This means that you must be much
+ more careful when removing tapes and putting up a new one. In
+ general, you should always do a "unmount" prior to removing a
+ tape, and a "mount" after putting a new one into the drive.
- If you use an Autochanger, you MUST update your SD conf file
to use the new Autochanger resource. Otherwise, certain commands
such as "update slots" may not work.
files, called "parts".
- For the details of the Python scripting support, please see the new
Python Scripting chapter in the manual.
-
-;;;
-
-Kern;;;2005/10/31;;;14:30
-The Bacula Version 1.38.0 tar file is released to Source Forge.
-
- Release Notes for Bacula 1.38.0
-
- Bacula code: Total files = 420 Total lines = 138,440 (*.h *.c *.in)
- 20,440 additional lines of code since version 1.36.3
-
-Major Changes:
-- Fixed out of order Volumes in restore.
-- Improved algorithm for reserving drives in multiple drive
- autochangers. Autochange users MUST use the new Autochanger
- resource in the Storage daemon.
-- There is a new database format that is not compatible
- with previous databases. You must upgrade if converting
- from 1.36.x. No changes from version 1.37.30.
-- The Director, Storage daemon, and File daemons are
- Deamons are not compatible with prior versions.
- All FDs must be upgraded at the same time.
-- Support for ANSI/IBM labels.
-- Faster database inserts due to combining the MD5/SHA1 into
- the attributes record, eliminating one INSERT/file backed up.
-- Python Event support has been added. See below for
- configuration and details. The implementation is somewhat minimal,
- so the functionality is not complete. The Python interface
- has not been extensively tested, so please consider it BETA.
-- DVD writing support, using parts, and some new directives in
- the Device resource of the Storage configuration file thanks
- to Nicolas Boichat. Please note that this code is still
- BETA and should be carefully tested before using in
- production.
-- Seven new options keywords in a FileSet resource:
- ignorecase, fstype, hfsplussupport, wilddir, wildfile, regexdir,
- and regexfile thanks to Pruben Guldberg). See below for details.
-- Restore of all files for a Job or set of jobs even if the file
- records have been removed from the catalog.
-- Restore of a directory (non-recursive, i.e. only one level).
-- Support for TLS (ssl) between all the daemon connections thanks
- to Landon Fuller.
-- Any Volume in the Pool named Scratch may be reassigned to any
- other Pool when a new Volume is needed.
-- You may clone a Job and thus write (almost) the same data
- to multiple Volumes simultaneously (see below). Actually,
- any Job may start any other Job with this mechanism, so it
- also be used to group jobs.
-- Unicode filename support for Win32 (thanks to Thorsten Engel)
-- Volume Shadow Copy support for Win32 thus the capability to
- backup exclusively opened files (thanks to Thorsten Engel).
- A VSS enabled Win32 FD is available. You must explicitly
- turn on VSS with "Enable VSS = yes" in your FileSet resource.
-- New manual format with an index (thanks to Karl Cunningham).
-- New Web site format (thanks to Michael Scherer).
-- SQLite3 support.
-- Web-bacula, previously a separate project by Juan Luis Frances,
- is now included in the Bacula GUI release. This is a management
- level tool for reporting the state of Bacula jobs.
-- The code is now Internationalized so that it can be localized
- in native languages. Thanks to Nicolas Boichat.
-
-New Directives:
-- New Job directive "Prefer Mounted Volumes = yes|no" causes the
- SD to select either an Autochanger or a drive with a valid
- Volume already mounted in preference. If none is available,
- it will select the first available drive.
-- New Run directive in Job resource of DIR. It permits
- cloning of jobs. To clone a copy of the current job, use
- Run = "job-name level=%l since=\"%s\""
- Note, job-name is normally the same name as the job that
- is running but there is no restriction on what you put. If you
- want to start the job by hand and use job overrides such as
- storage=xxx, realize that the job will be started with the
- default storage values not the overrides. The level=%l guarantees
- that the chosen level of the job is the same, and the since=...
- ensures that the job uses *exactly* the same time/date for incremental
- and differential jobs. The since=... is ignored when level=Full.
- A cloned job will not start additional clones, so it is not possible
- to recurse.
-- New Options keywords in a FileSet directive (backported to 1.36.3):
- - WildDir xxx
- Will do a wild card match against directories (files will not
- be matched).
- - WildFile xxx
- Will do a wild card match against files (directories will not
- be matched).
- - RegexDir xxx
- Will do a regular expression match against directories (files
- will not be matched).
- - RegexFile xxx
- Will do a regular expression match against files( directories
- will not be matched).
- - IgnoreCase = yes | no
- Will ignore case in wild card and regular expression matches.
- This is handy for Windows where filename case is not significant.
- - FsType = string
- where string is a filesystem type: ext2, jfs, ntfs, proc,
- reiserfs, xfs, usbdevfs, sysfs, smbfs, iso9660. For ext3
- systems, use ext2. You may have multiple fstype directives
- and thus permit multiple filesystem types. If the type
- specified on the fstype directive does not match the
- filesystem for a particular directive, that directory will
- not be backed up. This directive can be used to prevent
- backing up non-local filesystems.
- - HFS Plus Support = yes | no
- If set, Mac OS X resource forks will be saved and restored.
-- Label Type = ANSI | IBM | Bacula
- Implemented in Director Pool resource and in SD Device resource.
- If it is specified in the SD Device resource, it will take
- precedence over the value passed from the Director to the SD.
-- Check Labels = yes | no
- Implemented in the SD Device resource. If you intend to read
- ANSI or IBM labels, this *must* be set. Even if the volume
- is not ANSI labeled, you can set this to yes, and Bacula will
- check the label type.
-- Scripts Directory = <directory> name. Defines the directory from
- which Bacula scripts will be called for events. In fact, Bacula
- appends this name to the standard Python list of search directories,
- so the script could also be in any of the Python system directories.
-- In FileSet, you can exclude backing up of hardlinks (if you have
- a lot, it can be very expensive), by using:
- HardLinks = no
- in the Options section. Patch supplied by David R Bosso. Thanks.
-- MaximumPartSize = bytes (SD, Device resource)
- Defines the maximum part size.
-- Requires Mount = Yes/No (SD, Device resource)
- Defines if the device require to be mounted to be read, and if it
- must be written in a special way. If it set, the following directives
- must be defined in the same Device resource:
- + Mount Point = directory
- Directory where the device must be mounted.
- + Mount Command = name-string
- Command that must be executed to mount the device. Before the command
- is executed, %a is replaced with the Archive Device, and %m with the
- Mount Point.
- + Unmount Command = name-string
- Command that must be executed to unmount the device. Before the
- command is executed, %a is replaced with the Archive Device, and
- %m with the Mount Point.
- + Write Part Command = name-string
- Command that must be executed to write a part to the device. Before
- the command is executed, %a is replaced with the Archive Device, %m
- with the Mount Point, %n with the current part number (0-based),
- and %v with the current part filename.
- + Free Space Command = name-string
- Command that must be executed to check how much free space is left
- on the device. Before the command is executed, %a is replaced with
- the Archive Device, %m with the Mount Point, %n with the current part
- number (0-based), and %v with the current part filename.
-- Write Part After Job = Yes/No (DIR, Job Resource, and Schedule Resource)
- If this directive is set to yes (default no), a new part file will be
- created after the job is finished.
-- A pile of new Directives to support TLS. Please see the TLS chapter
- of the manual.
-
-New Commands:
-- "python restart" restarts the Python interpreter. Rather brutal, make
- sure no Python scripts are running. This permits you to change
- a Python script and get Bacula to use the new script.
-
-New configure options:
-- --with-libintl-prefix for defining alternate locations for
- the NLS internationalization libraries. Not normally required.
-- --datadir for defining where the language files will be installed
- required only if you do not want the default /usr/share.
-
-Items to note!!!
-- If you use an Autochanger, you MUST update your SD conf file
- to use the new Autochanger resource. Otherwise, certain commands
- such as "update slots" may not work.
-- You must add --with-python=[DIR] to the configure command line
- if you want Python support. Python 2.2, 2.3 and 2.4 should be
- automatically detected if in the standard place.
-- When linking with --with-python, there are a few warnings that
- can be ignored.
-- You must either create a new catalog database or upgrade your
- old database. After installation, run from your scripts
- directory:
-
- ./upgrade_bacula_tables
-
- You can also find this script in the <bacula-source>/src/cats
- directory.
-- The Director, Storage daemon, and File daemons are
- Deamons are not compatible with prior versions.
- All FDs must be upgraded at the same time.
-- You must add --with-openssl to the configure command line if
- you want TLS communications encryption support.
-- Disk seeking during restores does not yet work correctly in
- all cases, so it is turned off.
-- Note, with gcc (GCC) 4.0.1 20050727 (Red Hat 4.0.1-5) on an
- AMD64 CPU running 64 bit CentOS4, there is a compiler bug that
- generates bad code that causes Bacula to segment fault.
- Typically you will see this in the Storage daemon first. The
- solution is to compile Bacula ensuring that no optimization is
- turned on (normally it is -O2).
-
-
-Other Items:
-- Security fixes for temp files created in mtx-changer, during
- ./configure, and during making of Rescue disk.
-- A new script, dvd-handler, in the scripts directory,
- which is designed to be used as parameters to Write Part Command and
- Free Space Command. They need the dvd+rw-tools to be installed
- (http://fy.chalmers.se/~appro/linux/DVD+RW/) AND, the growisofs
- program must be patched using the
- <bacula-source>/patches/dvd+rw-tools-5.21.4.10.8.bacula.patch
- You must have Python installed to run the scripts.
-- Part files support: File volumes can now be split into multiple
- files, called "parts".
-- For the details of the Python scripting support, please see the new
- Python Scripting chapter in the manual.
-
-;;;
-
-
-Kern;;;2005/07/26;;;14:30
-BACULA COMMUNITY NEWS RELEASE
-Backup Data Encryption Development Project
-26 July 2005
-
-WHAT
-After initial discussions between Bacula project manager Kern
-Sibbald, freelance open source developer Landon Fuller, and Craig
-Thompson, President of WingNET Internet Services, an agreement
-has been reached to begin work on the inclusion of data
-encryption as an integral part of Bacula.
-
-WHY
-The purpose of this project is to provide backup clients with the
-ability to securely encrypt their data for storage on Bacula
-storage servers without having to worry about the possibility of
-the data being accessed either by hackers or third parties. Data
-that is encrypted on Volumes on the remote server can give your
-customer (or CEO) an additional peace of mind that makes the
-difference between a sale or no sale.
-
-WHO
-WingNET recently expressed an interest in seeing this
-functionality developed. The concept had also been requested by
-numerous individuals and companies in the recent past on the
-various Bacula mailing lists. Kern suggested asking Landon to
-work on the project in order to speed up the process.
-
-HOW
-Landon Fuller has agreed to begin working on the project. As
-compensation for his time, his goal is to raise approximately
-$3,000 for donation to the Electronic Freedom Foundation.
-WingNET has offered to provide an initial donation of $500 for
-the project. However, YOUR support is needed to make the project
-a success. The data encryption project needs individuals and
-companies who would be willing to donate any amount of money
-toward the completion of the project.
-
-WHERE
-You may contribute by going to the EFF site donation page at:
-
-https://secure.eff.org/site/SPageServer?pagename=DON_splash&JServSessionIdr006=h0do7dkvl1.app2a
-
-and clicking on the "Gift Memberships >>" button. You will
-be asked to provide "Tribute Information" and to select an eCard
-recipient. Please use "The Bacula Project" as the honored
-individual name, and please choose to send an eCard to Kern
-Sibbald <kern at sibbald dot com>. Please do not forget to
-include the amount of your donation on the message that goes with
-the eCard. It is not necessary to specify a snail-mail
-notification address.
-
-By correctly sending an eCard, including the donation amount, we can
-track the total amount donated for this project.
-
-Can your company contribute $250 or $500? How about $100? And
-if your budget is really tight, why not forego a couple of fast
-food meals and contribute $20?
-
-This is a community project, and this can be your way of helping make
-Bacula an even better product for the good of the whole community.
-
-If you have any questions related to this project, please contact
-Kern Sibbald <kern at sibbald dot com>.
-
-;;;
-
+- The default user/group for the Director and Storage daemon installed
+ by rpms is bacula/bacula, thus you may need to add additional permissions
+ to your database, or modify the permissions of the tape drive. If
+ all else fails, change to using user=root. However, it is more secure
+ to use user=bacula.
Michael;;;2005/02/25;;;19:59
News-Page for the Bacula-Website finished
JobId 2508 (MatouVerify) is waiting because only one job can run at a
time, hence it is simply "waiting execution"
- If you do a {\bf status dir}, it will by default list all jobs
- that are scheduled in the next two days. If you wish to see
- the jobs that are scheduled in the next 3 days (e.g. on Friday
- you want to see wat tapes are scheduled to be used on Monday), you
- can add the {\bf days=3} option.
+ If you do a {\bf status dir}, it will by default list the first
+ occurrence of all jobs that are scheduled today and tomorrow. If you
+ wish to see the jobs that are scheduled in the next 3 days (e.g. on
+ Friday you want to see the first occurrence of what tapes are scheduled
+ to be used on Friday, the weekend, and Monday), you can add the {\bf
+ days=3} option. Note, a {\bf days=0} shows the first occurrence of jobs
+ scheduled today only. If you have multiple run statements, the first
+ occurrence of each run statement for the job will be displayed for the
+ period specified.
\item [unmount]
\index[console]{unmount}
cassettes in the magazine, or if you have removed the magazine and
inserted a different one. As the slot of each Volume is updated, the
InChanger flag for that Volume will also be set, and any other Volumes
- in the Pool will have their InChanger flag turned off. This permits
+ in the Pool that were last mounted on the same Storage device
+ will have their InChanger flag turned off. This permits
Bacula to know what magazine (tape holder) is currently in the
autochanger.
-1.38.3 (26 December 2005)
+Beta-1.38.4 (11 January 2006)
--- /dev/null
+
+ Release Notes for Bacula 1.38.4
+
+ Bacula code: Total files = 424 Total lines = 140,955 (*.h *.c *.in)
+ 20,440 additional lines of code since version 1.36.3
+
+Changes to 1.38.4 BETA:
+09Jan06
+- Fix autochanger code to strip leading spaces from returned
+ slots number. Remove bc from chio-changer.
+- Back port a bit of 1.39 crypto code to reduce diffs.
+- Fix first call to autochanger that missed close()ing the
+ drive. Put close() just before each run_program(). Fixes
+ Arno's changer bug.
+- Add PoolId to Job record when updating it at job start time.
+- Pull in more code from 1.39 so that there are fewer file
+ differences (the new ua_dotcmds.c, base64.h, crypto.h
+ hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
+ util.c. Aside from ua_dotcmds.c these are mostly crypto
+ upgrades.
+- Implement new method of walking the jcr chain. The
+ incr/dec of the use_count is done within the walking
+ routines. This should prevent a jcr from being freed
+ from under the walk routines.
+
+
+Changes to 1.38.3 released 05Jan06:
+- This is mainly a bug release fix. In addition, the multiple drive
+ reservation algorithm has been rewritten.
+- In addition, the method of handling waiting for tapes to be
+ mounted and the mount messages has been modified.
+ (the above two items are a potential source of problems).
+- Simplify code in askdir.c that waits for creating an appendable
+ volume so that it can handle multiple returns from the wait code.
+- Modify the wait code to permit multiple returns.
+- Return a zero when "autochanger drives" is called and
+ it is not an autochanger.
+- Make rewind_dev() a method taking a DCR as an argument.
+ This permits closing and reopening the drive if the
+ rewind fails as happens if the drive was loaded while the
+ file descriptor was open. This refreshes the file descriptor.
+- Remove the ST_OPENED flag and always rely on fd < 0 for knowing
+ if the device is open or not. This should eliminate
+ Arnos problem.
+- Return error if reserve cannot find at least one suitable device.
+- Make wait_for_sysop() return correct state information.
+- Fix Win32 state file problem. write was not using compat
+ code. This should fix bug #500.
+- Modify gui on command to set only GUI mode and not batch.
+- Modify .messages command to always print messages regardless
+ of the mode.
+- If GUI mode is on, suppress automatic printing of
+ You have messages.
+- Modify restore command in wx-console to set gui on and to use
+ only .messages instead of messages. Hopefully this fixes bug
+ #514.
+- Implement load balancing code with multiple drive autochangers.
+- Rewrite reservation algorithm again. Rename variables to be
+ more logical, add HEARTBEAT with Director, allow cancel of
+ jobs stuck in reservation, add last resourt any_drive.
+- Fix seg fault if user labels a drive directly bug #513
+- Remove quotes around Version as it breaks things.
+- Merge in Aleksandar Milivojevic's mods to the spec file.
+- Apply sparse code fix for raw drives and fifos. Bug 506
+- Thorsten fixed Unicode cd problem with wx-console bug 505.
+- Correct reservation system to do a last ditch try
+ for any mounted volume, then anyone anywhere.
+- Updates to ssh-tunnel from Joshua Kugler.
+- Added a report.pl program from Jonas Bjorklund.
+- Simplify the O_NONBLOCK open() code for tape drives,
+ and always open nonblocking.
+- Do not wait for open() if EIO returned (shouldn't happen).
+- Eliminate 3 argument to tape open().
+- Correct the slot # edited in the 3995 Bad autochanger unload
+ message.
+- With -S on bscan (show progress) do not divide by zero.
+- Make cancel pthread_cond_signal() pthread_cond_broadcast().
+- When dcr is freed, also broadcast dev->wait_next_vol signal.
+- Remove unused code in wait_for_device.
+- Make wait_for_device() always return after 60 seconds of wait.
+- Use localhost if no network configured
+- Eliminated duplicate MaxVolBytes in cat update -- bug 509.
+- Update specs to include mysql4 define.
+- Return rec->FileIndex in dcr->VolLastIndex for normal
+ and partial records in read_record(). This allows bscan
+ to get FileIndex at EOT correct.
+- Fix butil.c to correctly set dcr -- fixes seg fault in bls.
+- Apply patch supplied by user (slightly modified) to fix
+ correct detection of holes in block devices and FIFOs.
+ Bug # 506.
+- Apply patch supplied by user (slightly modified)
+ to fix SD hang with multiple pools and bad client
+ IP. Fixes bug # 508.
+- Add nagios plugin to the examples directory. Submitted by
+ Christian Masopust.
+- Remove warning message about multiple saves of hardlinked files
+ from find_one.c as it can generate too many warning messages.
+- Reset timeout values before select() per patch from
+ Frank Sweetser for problems with non-blocking sockets.
+- Unlink the state file if either reading or writing it gets
+ errors. Hopefully this will fix Win32 exit problems.
+- Get next volume from Scratch pool before creating a volume.
+- Set new Pool defaults in Vol when moved from Scratch Pool.
+- Remove argument from create_bacula_database for SQLite as it
+ caused an error.
+- Fix reservation so that mutexes are properly applied.
+- Rework reservation algorithm so that two drives can be used
+ at the same time.
+- Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
+ If this patch is applied, the number of days can be specified with
+ "list nextvol days=xx"
+ or
+ "status dir days=xx"
+ My use case is to be able to preview the next scheduled job (and the
+ next tape to be used) on fridays if there are no scheduled jobs during
+ the weekend.
+- Fix font code in gnome2 console user patch. Fixes bug #501.
+- Fix malformatted bnet error message that caused seg fault
+ fixes bug 502
+- Applied user patch to improve README.vc8 in src/win32.
+- Ensure that StorageId is stored in Media record when ever possible.
+- Remove old code from winservice.cpp
+- Break on error in scan.
+- Fix typo in signal.c
+- Separate read/write DCR in SD. Add jcr->read_dcr.
+- Cleanup how find_device() works.
+- Remove abs() in bfile.c so that it compiles on Solaris. Bug #491.
+
+Changes to 1.38.2:
+- Fix crash in tray-monitor when daemon disconnects. Bug #479.
+- Fix bnet-server bug found on OpenBSD. Bug #486
+- Fix cancel failure bug. Bug #481
+- Fix failure when Pool name has spaces. Bug #487
+- Fix SD crash in autochanger code. Mutex failure. Bug #488
+- Fix a couple of free()s in src/filed/acl.c
+- Fix memory overrun in bfile.c in building OS X resource
+ fork filename. Bug #489
+- Add Pool name to SD status output.
+- Add Python install dir for Solaris to configure. Bug #492
+
+Changes to 1.38.1:
+- Corrected ACL for Solaris (David Duchscher and Attila Fulop).
+- Add bacula_mail_summary.sh to examples directory. It makes
+ a single email summary of any number of jobs. Submitted
+ by Adrew J. Millar.
+- Unmount command now unloads autochanger.
+- Fix hang in FD (Martin Simmons)
+- Fix Win98 stat() problem in FD (Thorsten Engel)
+- Fix update slots which did not clear missing tapes.
+- Fix autostart install for FreeBSD (user reported)
+- Fix several problems with PostgreSQL scripts (Eric Bollinger)
+- Critical: allow restore of the first file of non-portable Win32 backup.
+- Important: with muliple concurrent jobs the autochanger could get
+ confused because of a missing mutex.
+- Fix accessing last slot in label and update slots.
+- Modify configure.in to add execute option to sqlite3 catalog
+ scripts.
+- Create update_xxx_table_8_to_9 scripts for updatedb
+- Move the -lcrypt for PostgreSQL after the PostgreSQL libs in
+ autoconf/bacula-macros/db.m4 as suggested by user. Fixes bug #457.
+- Remove @STATIC_CONS@ from tray-monitor Makefile as suggested
+ by user. Fixes bug #456.
+- AMD64 users see compiler bug warning below!!!!!!!!!
+
+Major Changes in 1.38:
+- Fixed out of order Volumes in restore.
+- Improved algorithm for reserving drives in multiple drive
+ autochangers. Autochange users MUST use the new Autochanger
+ resource in the Storage daemon.
+- There is a new database format that is not compatible
+ with previous databases. You must upgrade if converting
+ from 1.36.x. No changes from version 1.37.30.
+- The Director, Storage daemon, and File daemons are
+ Deamons are not compatible with prior versions.
+ All FDs must be upgraded at the same time.
+- Support for ANSI/IBM labels.
+- Faster database inserts due to combining the MD5/SHA1 into
+ the attributes record, eliminating one INSERT/file backed up.
+- Python Event support has been added. See below for
+ configuration and details. The implementation is somewhat minimal,
+ so the functionality is not complete. The Python interface
+ has not been extensively tested, so please consider it BETA.
+- DVD writing support, using parts, and some new directives in
+ the Device resource of the Storage configuration file thanks
+ to Nicolas Boichat. Please note that this code is still
+ BETA and should be carefully tested before using in
+ production.
+- Seven new options keywords in a FileSet resource:
+ ignorecase, fstype, hfsplussupport, wilddir, wildfile, regexdir,
+ and regexfile thanks to Pruben Guldberg). See below for details.
+- Restore of all files for a Job or set of jobs even if the file
+ records have been removed from the catalog.
+- Restore of a directory (non-recursive, i.e. only one level).
+- Support for TLS (ssl) between all the daemon connections thanks
+ to Landon Fuller.
+- Any Volume in the Pool named Scratch may be reassigned to any
+ other Pool when a new Volume is needed.
+- You may clone a Job and thus write (almost) the same data
+ to multiple Volumes simultaneously (see below). Actually,
+ any Job may start any other Job with this mechanism, so it
+ also be used to group jobs.
+- Unicode filename support for Win32 (thanks to Thorsten Engel)
+- Volume Shadow Copy support for Win32 thus the capability to
+ backup exclusively opened files (thanks to Thorsten Engel).
+ A VSS enabled Win32 FD is available. You must explicitly
+ turn on VSS with "Enable VSS = yes" in your FileSet resource.
+- New manual format with an index (thanks to Karl Cunningham).
+- New Web site format (thanks to Michael Scherer).
+- SQLite3 support.
+- Web-bacula, previously a separate project by Juan Luis Frances,
+ is now included in the Bacula GUI release. This is a management
+ level tool for reporting the state of Bacula jobs.
+- The code is now Internationalized so that it can be localized
+ in native languages. Thanks to Nicolas Boichat.
+
+New Directives:
+- New Job directive "Prefer Mounted Volumes = yes|no" causes the
+ SD to select either an Autochanger or a drive with a valid
+ Volume already mounted in preference. If none is available,
+ it will select the first available drive.
+- New Run directive in Job resource of DIR. It permits
+ cloning of jobs. To clone a copy of the current job, use
+ Run = "job-name level=%l since=\"%s\""
+ Note, job-name is normally the same name as the job that
+ is running but there is no restriction on what you put. If you
+ want to start the job by hand and use job overrides such as
+ storage=xxx, realize that the job will be started with the
+ default storage values not the overrides. The level=%l guarantees
+ that the chosen level of the job is the same, and the since=...
+ ensures that the job uses *exactly* the same time/date for incremental
+ and differential jobs. The since=... is ignored when level=Full.
+ A cloned job will not start additional clones, so it is not possible
+ to recurse.
+- New Options keywords in a FileSet directive (backported to 1.36.3):
+ - WildDir xxx
+ Will do a wild card match against directories (files will not
+ be matched).
+ - WildFile xxx
+ Will do a wild card match against files (directories will not
+ be matched).
+ - RegexDir xxx
+ Will do a regular expression match against directories (files
+ will not be matched).
+ - RegexFile xxx
+ Will do a regular expression match against files( directories
+ will not be matched).
+ - IgnoreCase = yes | no
+ Will ignore case in wild card and regular expression matches.
+ This is handy for Windows where filename case is not significant.
+ - FsType = string
+ where string is a filesystem type: ext2, jfs, ntfs, proc,
+ reiserfs, xfs, usbdevfs, sysfs, smbfs, iso9660. For ext3
+ systems, use ext2. You may have multiple fstype directives
+ and thus permit multiple filesystem types. If the type
+ specified on the fstype directive does not match the
+ filesystem for a particular directive, that directory will
+ not be backed up. This directive can be used to prevent
+ backing up non-local filesystems.
+ - HFS Plus Support = yes | no
+ If set, Mac OS X resource forks will be saved and restored.
+- Label Type = ANSI | IBM | Bacula
+ Implemented in Director Pool resource and in SD Device resource.
+ If it is specified in the SD Device resource, it will take
+ precedence over the value passed from the Director to the SD.
+- Check Labels = yes | no
+ Implemented in the SD Device resource. If you intend to read
+ ANSI or IBM labels, this *must* be set. Even if the volume
+ is not ANSI labeled, you can set this to yes, and Bacula will
+ check the label type.
+- Scripts Directory = <directory> name. Defines the directory from
+ which Bacula scripts will be called for events. In fact, Bacula
+ appends this name to the standard Python list of search directories,
+ so the script could also be in any of the Python system directories.
+- In FileSet, you can exclude backing up of hardlinks (if you have
+ a lot, it can be very expensive), by using:
+ HardLinks = no
+ in the Options section. Patch supplied by David R Bosso. Thanks.
+- MaximumPartSize = bytes (SD, Device resource)
+ Defines the maximum part size.
+- Requires Mount = Yes/No (SD, Device resource)
+ Defines if the device require to be mounted to be read, and if it
+ must be written in a special way. If it set, the following directives
+ must be defined in the same Device resource:
+ + Mount Point = directory
+ Directory where the device must be mounted.
+ + Mount Command = name-string
+ Command that must be executed to mount the device. Before the command
+ is executed, %a is replaced with the Archive Device, and %m with the
+ Mount Point.
+ + Unmount Command = name-string
+ Command that must be executed to unmount the device. Before the
+ command is executed, %a is replaced with the Archive Device, and
+ %m with the Mount Point.
+ + Write Part Command = name-string
+ Command that must be executed to write a part to the device. Before
+ the command is executed, %a is replaced with the Archive Device, %m
+ with the Mount Point, %n with the current part number (0-based),
+ and %v with the current part filename.
+ + Free Space Command = name-string
+ Command that must be executed to check how much free space is left
+ on the device. Before the command is executed, %a is replaced with
+ the Archive Device, %m with the Mount Point, %n with the current part
+ number (0-based), and %v with the current part filename.
+- Write Part After Job = Yes/No (DIR, Job Resource, and Schedule Resource)
+ If this directive is set to yes (default no), a new part file will be
+ created after the job is finished.
+- A pile of new Directives to support TLS. Please see the TLS chapter
+ of the manual.
+
+New Commands:
+- "python restart" restarts the Python interpreter. Rather brutal, make
+ sure no Python scripts are running. This permits you to change
+ a Python script and get Bacula to use the new script.
+
+New configure options:
+- --with-libintl-prefix for defining alternate locations for
+ the NLS internationalization libraries. Not normally required.
+- --datadir for defining where the language files will be installed
+ required only if you do not want the default /usr/share.
+
+Items to note!!!
+- The Storage daemon now keeps track of what tapes it is using
+ (was not the case in 1.36.x). This means that you must be much
+ more careful when removing tapes and putting up a new one. In
+ general, you should always do a "unmount" prior to removing a
+ tape, and a "mount" after putting a new one into the drive.
+- If you use an Autochanger, you MUST update your SD conf file
+ to use the new Autochanger resource. Otherwise, certain commands
+ such as "update slots" may not work.
+- You must add --with-python=[DIR] to the configure command line
+ if you want Python support. Python 2.2, 2.3 and 2.4 should be
+ automatically detected if in the standard place.
+- When linking with --with-python, there are a few warnings that
+ can be ignored.
+- You must either create a new catalog database or upgrade your
+ old database. After installation, run from your scripts
+ directory:
+
+ ./upgrade_bacula_tables
+
+ You can also find this script in the <bacula-source>/src/cats
+ directory.
+- The Director, Storage daemon, and File daemons are
+ Deamons are not compatible with prior versions.
+ All FDs must be upgraded at the same time.
+- You must add --with-openssl to the configure command line if
+ you want TLS communications encryption support.
+- Disk seeking during restores does not yet work correctly in
+ all cases, so it is turned off.
+- Note, with gcc (GCC) 4.0.1 20050727 (Red Hat 4.0.1-5) on an
+ AMD64 CPU running 64 bit CentOS4, there is a compiler bug that
+ generates bad code that causes Bacula to segment fault.
+ Typically you will see this in the Storage daemon first. The
+ solution is to compile Bacula ensuring that no optimization is
+ turned on (normally it is -O2).
+ This same compiler bug has been reported and confirmed with
+ gcc (GCC) 4.0.2 20050901 (prerelease) (SUSE Linux) running on
+ an AMD64 CPU. This for the moment, I would recommend that all
+ users of GCC 4.0.1 or greater turn off all optimization when
+ compiling.
+
+
+Other Items:
+- Security fixes for temp files created in mtx-changer, during
+ ./configure, and during making of Rescue disk.
+- A new script, dvd-handler, in the scripts directory,
+ which is designed to be used as parameters to Write Part Command and
+ Free Space Command. They need the dvd+rw-tools to be installed
+ (http://fy.chalmers.se/~appro/linux/DVD+RW/) AND, the growisofs
+ program must be patched using the
+ <bacula-source>/patches/dvd+rw-tools-5.21.4.10.8.bacula.patch
+ You must have Python installed to run the scripts.
+- Part files support: File volumes can now be split into multiple
+ files, called "parts".
+- For the details of the Python scripting support, please see the new
+ Python Scripting chapter in the manual.
+- The default user/group for the Director and Storage daemon installed
+ by rpms is bacula/bacula, thus you may need to add additional permissions
+ to your database, or modify the permissions of the tape drive. If
+ all else fails, change to using user=root. However, it is more secure
+ to use user=bacula.
projects / bacula / docs / commitdiff