--- /dev/null
+ Technical notes on version 1.37
+ Kern Sibbald
+
+General:
+
+Changes to 1.37.36:
+20Aug05
+- Landon's fix for NLS detection
+- Eliminate incorrect compiler warning on FreeBSD.
+- Move Win32 errno message build into berrno constructor.
+- Minor Win32 build tweaks
+19Aug05
+- A number of minor build Win32 fixes.
+- Remove a PostQuitMessage() as suggested by Thorsten so that
+ BartPE restore can work correctly.
+- Fix for create JobMedia so that VolIndex remains valid even
+ during a delete Job or pruning -- bug 402.
+- Minor tweak for Win32 build.
+18Aug05
+- Win32 fix -- remove debug O_NONBLOCK code.
+- Fix bug 399 -- make_catalog_backup does not work for sqlite3
+- Implement unloading a volume in a different drive if it
+ is needed in the current drive.
+- Implement search for unused autochanger drive.
+- Implement search for exact Volume in reservation before
+ other searches.
+- Fix picking up drive in Dir so that it is not done in
+ the status command.
+- Eliminate double check on "loaded" for autochanger.
+17Aug05
+- Start coding better reservation algorithm
+- Always look for slot for label command.
+- Add more debug code for autochangers.
+- Apply fix from Stephan Leemburg <sleemburg@jvc.nl> for
+ improper scanning of schedule resource:
+ Run = Level=Full Pool=Catalog daily at 1:20
+- Apply patch from Chris Lee <labmonkey42@gmail.com> for
+ adding --enable-build-dird --enable-build-stored.
+- Tweak datadir definition in configure.in
+16Aug05
+- Fix bug that missed drive=nn specification.
+- Eliminate nonblocking kludge in heartbeat of FD as
+ it caused high CPU usage.
+- Pickup loaded slot when doing open() of tape drive.
+- Make autochanger reservation code go through full list
+ first pass until exact match found.
+15Aug05
+- Fix how FileSet is saved in job record to correct continual
+ Full save.
+- Make datadir print on config.out listing.
+- Move get FileSet record up in backup init to eliminate continual
+ Full save seen by Peter Sjoberg.
+- Add VolumeName to read-only Python variables.
+- Add VolumePurged event for Python.
+- Suppress /dev/ Filesystem change prohibited INFO messages.
+- Do not delete FT_RAW files before restore (allows FIFOs
+ to be used for restore).
+13Aug05
+- Add drive specification to mount, unmount, release, label,
+ and relabel for Autochangers. Note Dir<->SD protocol has
+ changed.
+
+Changes to 1.37.35:
+12Aug05
+- Disable parts of NLS as the configure does not work here.
+- In job backup init (backup.c) define definitive Job level and
+ since time, *then* apply Job Pool override selection if any.
+11Aug05
+- Modified bconsole script so that it is improperly
+ installed, it will refuse to execute. This avoids
+ recursive call loops.
+
+Changes to 1.37.34:
+06Aug05
+- Apply David's ACL fix to src/filed/acl.c
+05Aug05
+- Apply patches sent by David Duchscher <kreios@gmail.com> for
+ making ACLs work on MacOS X and FreeBSD.
+04Aug05
+- Apply patch in bug#397 that improved configure
+ - find readline under $with_readline/include/readline
+ - no libutil under Solaris
+ - no need for -ldl under Solaris
+- Make reservation system single threaded during the
+ search to avoid two threads competing for the same
+ resource.
+- Correct a return code in find_suitable_device_for_job()
+ Possibly cause of "busy writing to another volume".
+03Aug05
+- Modify open() for tape so nonblocking really works.
+- Use fcntl() to reset blocking status rather than close()
+ and reopen the drive.
+- Make sure dev->open() is always called so that any change
+ in read/write permissions will occur.
+- Open drives initially in daemon in read-only mode.
+- Ensure that each time the VolHdr.VolumeName is zapped
+ or changed that free_volume() is called on the old name.
+
+Changes to 1.37.33:
+03Aug05
+- Require 5 arguments to mtx-changer except list and slots
+- Turn -EPIPE status returns from bpipe to ETIME
+- Include Slot in SD status output
+- Do not term_dev() during initialization in SD if the device
+ could not be opened. In the case of a tape drive, there may
+ be no tape in the drive.
+
+Changes to 1.32.32:
+02Aug05
+- Correct PostgreSQL database scripts as suggested by a user.
+- Add additional info to FATAL message generated when a device
+ is busy writing to another volume.
+- Suppress an inappropriate NULL Volume name message after a cancel.
+- Correct a warning message in reserve.c
+29Jul05
+- Apply user's patch to make mutiple modifiers for times
+ work correctly.
+- Make read_dev_volume_label() handle ANSI/IBM labels
+ correctly -- ie space over any label at the beginning
+ of the tape.
+28Jul05
+- Make ANSI/IBM writing of HDR1/2 labels ignore any
+ errors if at end of tape.
+- Apply Martin's patch to improve Python detection in
+ configure.in
+- Temporarily turn off disk seeking until I find the
+ cause of the problem.
+27Jul05
+- Add OSF1 patch supplied by user.
+- Use number of files selected from write_bsr() only
+ if it is not defined.
+- Explicitly seek to end of file when getting size for
+ restore test.
+- Correctly set EndBlock position in JobMedia record
+ for files.
+- Remove unnecessary set StartBlock in bscan. Caused bscan
+ regression error.
+26Jul05
+- Modify mtx-changer to wait a maximum of 300 seconds.
+- Do restart of failed jobs only for Backups job types.
+- A number of DVD updates from Nicolas.
+24Jul05
+- Turn off old service helper code in Win32.
+- Correct Messages bug found by Phil in stored.
+23Jul05
+- Complete (almost) documentation of 1.38.
+- Add error messages for error conditions with VSS.
+- Fix additional problems with VSS backup that I introduced.
+Changes to 1.37.31:
+22Jul05
+- Correct compiler complaints in wx-console and tray-monitor.
+- Correct VSS problems recognizing c:
+- Add VSS before job status
+- Fix output of status from being one big line.
+- Change cd xx; make to cd xx && make as suggested by Phil.
+- Cleanup projects file
+- Remove unnecessary casting of FF_PKT in filed.
+- Apply Thorsten's bugfix for vss_generic.cpp
+- Add check for df path for dvd_freespace
+- Use df to get space used on DVD.
+- Change sense of flag indicating erase DVD or not before writing.
+- Fix bpipe so that it never modifies the result pointer.
+- Replace more dev_name by print_name().
+- Rewrite edit_device_codes_dev() so it does not overwrite the
+ supplied buffer.
+- Update printing of labels (for bls) so that critical information
+ is printed (Job name and timestamp).
+- Cleanup old spool files when starting the SD.
+- Modify vss.cpp to allow C: as a path name. Otherwise VSS
+ doesn't work when only a drive name is given.
+- Modify vss.c to eliminate double / in filenames.
+- Update doc -- particularly the restore chapter.
+18Jul05
+- Make all files in working directory have .xxx at end.
+- Work on DVD writing.
+- Fix keepatime bug (bugs database).
+- Move Python variables from Job to Bacula. They are
+ DirName, Version, ConfigFile, and WorkingDir
+- Fix delete of bootstrap to only occur on Bacula created
+ filenames.
+- Allow cancelling a Job name that is not active. It is
+ sent to the daemons.
+17Jul05
+- Fix name space pollution by OpenSSL 0.9.8 reported by
+ Matthias Kurz -- applied his patch.
+- Fix bpipe.c so that it does not modify results pointer.
+ ***FIXME*** calling sequence should be changed.
+- Remove some remaining references to dev_name.
+- Fix calls to mount_dev() and unmount_dev() to
+ correspond to returned value (bool instead of int).
+- Try without success to make DVD writing work.
+
+Changes to 1.37.30 released 16 July 05:
+14Jul05
+- Fix "dir" command scanning field misalignment in
+ wx-console.
+- Switch to using the wxWidgets Unicode library.
+- Include msvcr71.dll in distribution.
+- Add VSS to status line in Win32 FD if enabled.
+- Get VSS build scripts working with Thorsten's help.
+- Unlink the bootstrap file after sending it to
+ the FD.
+- Remove sending include/exclude lists to the FD during
+ a restore -- deprecated code.
+- Cleanup the bootstrap files in the FD.
+
+Changes to 1.37.29:
+14Jul05
+- Remove old commented out code from configure.in
+- Add baculavssfd.mak file for building VSS version of
+ Win32 FD.
+- Correct date (year) in vss.cpp and vss_generic.cpp
+13Jul05
+- I finally found and squashed the elusive SD crash.
+ I needed to initialize the used volume list before
+ firing off the device initialization thread.
+Changes to 1.37.28:
+11Jul05
+- Make sure that bpipe results are zapped even on
+ error return.
+- Lots of documentation.
+- Do not prune volume marked as append when needing a
+ new Volume.
+- Print a warning message in SD if a non-used Volume
+ is specified and autolabel not turned on.
+- Correct a bug in chksum.c concerning SHA1 signatures
+ (an * should have been & when checking for a bit flag).
+- Print File:Block for all label records in label.c -- concerns
+ primarily bls when doing Job listings (-j).
+- Correct is_volume_in_use() to return false if testing
+ on the same device where the Volume is already mounted.
+- Define a init_done flag in the SD that is set when the
+ devices are initialized and make users connecting wait.
+ This prevents useless connect failure warning messages.
+- Do additional device locking in ask_op_to_mount_volume()
+ to prevent race conditions with a user labeling a Volume
+ or autolabeling.
+09Jul05
+- Add a test for error return from bnet_wait... in heartbeat.c
+ in FD to avoid CPU loop.
+- Implement TLS in gnome console and wx-console.
+08Jul05
+- Correct a NULL pointer reference in the mount command.
+- Correct typo in Copyright
+- Add detection of EOM for IBM drives (i.e. errno == ENOSPC)
+07Jul05
+- Remove temp file created in mtx-changer script.
+- Make fsf_dev() into a class method.
+06Jul05
+- Modify mtx-changer.in script to return slot:barcode for
+ Volumes that are loaded in the drives.
+- Correct some more places where dev->is_blocked() needs
+ to be checked in dircmd.c in SD.
+- Update doc.
+05Jul05
+- Add code to ensure that reserved but unused volumes
+ are freed.
+- Correct how Volumes are mounted and handled so that the SD
+ does not get stuck if multiple volumes are used (recycling,
+ relabling, ...)
+- Correct bug where you could relabel a volume while it
+ was being acquired -- created chaos.
+04Jul05
+- Correct seg fault caused by open() calling sequence change.
+03Jul05
+- Add new rc-chio-changer script by Rudolf Cejka to
+ examples/autochangers
+- Apply Rudolf's changes to bacula.in
+- Expand the space from 8 to 10 characters in editing
+ file sizes for restore and dir of catalog, otherwise
+ GB sizes are truncated -- fixes bug report.
+- Modify wx-console to know about 10 character widths.
+- Allow decending into top level directory if "recurse=no"
+ is set. Fixes a bug report.
+- Install pthreadVCE.dll when installing console or wx-console
+ on Win32 systems. Fixes bug report.
+02Jul05
+- Tweak dvd-writepart script to prevent door from opening/closing
+ so much.
+- Remove GROUP BY in several PostgreSQL commands to prevent error.
+ Resolves bug report.
+- Ensure that < as first character of filename list is not treated
+ as a directory for restore.
+- Add debug to heartbeat in FD as it seems to go into an
+ infinite loop from time to time during SD failure in DVD writing.
+- Add more debug code to dvd writing.
+- Attempt not to destroy existing fs on DVD.
+30Jun05
+- Detect device mounted for DVD and suppress be sure to
+ mount message after label.
+- Set Cleaning tape status to "Cleaning" and force no
+ MediaType.
+- Get DVD writing working with new standard Bacula open()
+ code.
+- Rename get_filename() to make more sense.
+- Detect "is already mounted on" on mount command so to avoid
+ error if device is already mounted.
+- Eliminated guess_name() code. It may be necessary to
+ add it back later.
+- Eliminate seg fault from printing invalid results.
+- Make dvd_write_part() bool.
+
+29Jun05
+- Attempt to fix DVD writing by eliminating a number of the
+ DVD subroutines to simplify.
+- Modify DEVICE::open() to take dcr as first argument. This
+ will permit providing more info to DVD opening.
+- Fix scanning for time/size items which in some cases
+ ate the next line.
+- Eliminate read_dvd_volume_label(). New code (not yet written)
+ *must* open dvd appropriately before calling
+ read_dev_volume_label.
+- Modify open_first_part() open_next_part() to take DCR as
+ argument.
+- Make label command from console work on DVDs.
+- Make mount command from console work on DVDs.
+ Unmount does not work yet.
+
+Changes to 1.37.27:
+27Jun05
+- Add Database vendor to CatalogRes tuple for Python.
+- Update doc
+- Implement DoesVolumeExist(Vol) for Python.
+- Prevent python command from seg faulting if no arg given.
+
+Changes to 1.37.26:
+26Jun05
+- Add set_mode method in DEVICE.
+- Correct set_mode method in DEVICE
+- Add more DVD debug info
+23Jun05
+- Check for incorrect duration and size modifiers in conf files.
+22Jun05:
+- Make Version a tuple (version, build-date)
+- Add CatalogRes tuple (DBName, Address, User, Password,
+ Socket, Port)
+- Add Version, ConfigFile, and WorkingDir as Python attributes
+ in the Director.
+- Implement code (principally for Win32) that on failure to
+ create a file, it will cd into the directory and attempt
+ to create the file using a relative path. This avoids creating
+ files with paths which fail on Win32.
+- Fix parsing of times and sizes with decimal numbers.
+- Make free_volume_list() in SD work if vol list is not
+ initialized (./bacula-sd -t).
+21Jun05:
+- Add debug error printout when open() fails.
+- If open() of DVD fails in mount.c, return false.
+- Split open() code for DVD into separate subroutine in dev.c
+
+Changes to 1.37.25 released on 20 Jun 05:
+20Jun05:
+- Remove (cd gnome-console; make clean) from src/Makefile.in
+- Fix bug where Storage daemon gets confused about what
+ tape is mounted. (one line of code was inadvertently
+ deleted).
+
+Changes to 1.37.24:
+18Jun05
+- DVD writing/reading seems to be mostly working.
+- Set execute bits on dvd-freespace and dvd-writepart
+- Make dvd-freespace use existing dummy file.
+- Modify dvd-freespace to pickup size from Track Size:
+16Jun05
+- Add Date, Job, level to updates to .bsr file in
+ dird/backup.c
+- Add debug info to dvd-freespace.in
+- Fix hard coded bacula.sql in make_catalog_backup reported
+ by a user.
+- Make sure a verify volume to catalog never reports an error
+ if there are zero files to verify.
+- Remove confusing debug info in filed/backup.c on network
+ error.
+- Make sure output from console is not sent to system log.
+- Convert open_dev() into a class method.
+- Change VolHdr.VolName to VolHdr.VolumeName.
+- Add a flag in the device state word to indicate that
+ we found Media in the drive (DVD).
+- Make mount_dev() and unmount_dev() return bool.
+
+Changes to 1.37.22:
+14Jun05
+- Fix the same state variable problem in open_next_part().
+- C++ify the SD code a bit more.
+13Jun05
+- Add more debug code and clarify debug code for DVDs.
+- Do not save and restore state in open_first_part()
+ since state should be properly set after open_dev().
+- Make default mandir /usr/share/man
+- Install Bacula man page.
+- Implement passing of FileSet Enable VSS to FD.
+- Move main body of reserve drive code into subroutine
+ so that it can be called multiple times.
+12Jun05
+- Eliminate getpass() for Win32 builds in console as the
+ function does not exist.
+10Jun05
+- Correct some reservation problems in SD when no devices
+ are available.
+- Start removing #ifdef HAVE_TLS by sneaky tricks.
+- Begin implementation of TLS in wx-console
+- Remove ignoring SIGCHLD from console.
+- Rework the dlist binary search routines for implemenation
+ of the Volume reservation code -- make it more general.
+- Strip double slashes // from Win32 filenames in an attempt
+ to resolve restore problems on some systems.
+- Fix a minor bugs in the trace code that caused the first
+ line output to be lost.
+- Implement a good first cut at adding Volume reservation code
+ to the storage daemon (in file reserve.c).
+- Remove old unused code from the tree.c routines.
+
+Changes to 1.37.21:
+06Jun05
+- Fix compile problems on Win32
+- Start writing Volume reservation list (already exists, but
+ is not really very good).
+- Implement attribute caching to put Signature into database
+ at the same time as the file attributes thus eliminating a
+ number of database accesses.
+- Correct a reservation problem.
+- Implement full Dir Storage use.
+- Reduce a bit of TLS #ifdeffing.
+
+Changes to 1.37.20:
+04Jun05
+- Minor changes
+01Jun05
+- Add more documentation to mtx-changer.in
+- Correct link to manual in authenticate.c in various
+ directories.
+- Create a new src/stored/reserve.c file where the
+ Use Storage command is processed and drives are
+ reserved.
+- Modify src/stored/autochanger.c to keep track of each
+ Slot that is loaded for each device.
+- Ensure that changer_command and changer_name are picked
+ up from Autochanger resource if not specified, and if
+ neither is specified, err.
+30May05
+- Fix bextract.c compile problem
+- Create bacula.man
+- Make make distclean clean a bit better
+29May05
+- Remove old code in jcr.c
+- Make testls release jcr chain when terminating.
+27May05
+- Implement Maximum Job Spool Size (actually DCR based)
+26May05
+- Use light weight non-recursive locking on jcr chain.
+- Make JCR a class and implement inc_use_count() and
+ dec_use_count() methods that ensure that the jcr is
+ locked when inc/dec the use count.
+- Remove the global jcr lock when traversing the jcr
+ chain.
+- Use dlist to implement the jcr chain rather than hand
+ crafted next and prev links.
+- Lock the jcr chain inside each function that modifies
+ the chain.
+
+Changes to 1.37.19:
+26May05
+- Fix compile problem of ua_restore.c on broken compilers.
+- Apply patch from bug 326 to permit bacula status by any user.
+- Fix bug 325 -- conversion of 12:30pm to 24hour time.
+25May05
+- Put Dmsg() on inside if() to avoid calling subroutine.
+- Make restore.bsr have unique name.
+- Allow user to define bsr filename on restore command line
+ with bootstrap=xxx.bsr
+- Add limit=nnn to "list jobs" command.
+- Remove old restore code that did not use .bsr file.
+- unlink automatically generated bsr file.
+- Cleanup heartbeat code so that duped fd is almost sure
+ to be released. Previously under certain conditions, the
+ memory was not released due to race conditions.
+- Shorten copyright.
+20May05
+- Unify the reserve_device() for a single device into one subroutine.
+18May05
+- Modify wait during use_device to happen only after all devices
+ have been examined rather than in the reserve_device code.
+- Correct updating count of number of Volumes in a pool.
+
+Changes to 1.37.18:
+16May05
+- Add more debug to SD for Autochangers + status output.
+- Add Scratch to PoolType in PostgreSQL make...tables and do not
+ permit NULL PoolTypes. Fix for bug 319 reported by Eric.
+- Update LICENSE.
+- Add quotes around filename in parse_config error message. Bug
+ reported by Eric.
+15May05
+- Change nested \include to \input so that sections are properly
+ included in the pdf manual -- update the Web site.
+- Set reconnect flag in MySQL packet to 1 to ensure that connection
+ is re-established. MySQL 5 changed default to 0. Fixes bug report.
+- Fix Scratch pool handling as reported in a bug by Eric Bollengier
+ by applying his patch.
+- Remove delete job in favor of delete jobid.
+- Add = NULL to configfile definitions as reported by Eric in a bug
+ report.
+- Update winbacula.nsi.in to reflect new manual file structure.
+10May05
+- Correct a minor build problem with wx-console.
+- Add cancel() to Dir Python scripting.
+- Re-correct bug in parse-config error handling.
+- Reorganization of use_command in SD to permit
+ waiting and multiple drive autochanger support.
+09May05
+- Correct bug in parse_config error handling.
+- Where ever possible mark a volume in error or not
+ InChanger in mount.c
+- Fix bug in changing tape pools after first backup. Reported
+ by Peter Sjoberg.
+- Enhance mtx-changer to use Working Directory as temp.
+- Remove all but initial setup locking of Res in SD.
+08May05
+- Add Client OS type to Job report.
+- Add version to manual
+- Update the Web site to have a single page for
+ the documentation links.
+
+Changes to 1.37.18 release 08May05:
+08May05
+- Correct attribute definition compile error in 1.37.17
+- Correct inverted order of CreateTime and MD5 pointed out
+ by a user in a bug report in FileSet db routine causing
+ the MD5 to print in the output instead of the time/date.
+
+Changes to 1.37.17:
+07May05
+- Implement cstrlen() in sql list routines.
+- Implement caching of attributes to add the
+ signature so that only one DB call will be made
+ per file. Not yet turned on.
+- Fix Win32 build for TLS.
+- Optimize File pruning to eliminate one database call.
+- Fix bug that prevented File pruning from working.
+- Implement a cstrlen() which returns the character
+ length of a UTF-8 string.
+06May05
+- Move test for MaxStartDelay as suggested by Peter.
+- Implement Python methods (I had to read the Python source
+ code).
+- Implement run() method in Director.
+- Add Priority and Scheduled time to Job report.
+- Add JobInit and JobRun events.
+- Add Priority as Python read/write attribute to Job.
+- Correct typo in bsmtp reported by Jo.
+
+Changes to 1.37.16 released 05May05
+03May05
+- Make a few tls ifdef tweaks.
+- Fix create_file.c Win32 problem pointed out by
+ Peter Sjoberg.
+- Fix really ugly bstrncpy() but found by Thorsten.
+- Move winapi.h/c from findlib to lib for inclusion in
+ multiple places.
+02May05
+- Thorsten Engel finished his work on Win32 Unicode. We
+ now have a single executable that runs on all Win32 machines.
+- Move job initialization code after job scheduling so that
+ Verify jobs check for the prior JobId after they are really
+ started rather than before.
+- Fix lib/fnmatch.c so that it does proper testing before folding.
+- More documentation -- at tls and ansi labels chapters.
+- Fix fileset_convert.pl to handle empty Exclude statements.
+- Turn regex back off in Win32
+01May05
+- Fix sign extension problem in lex.c that reads UTF-8
+ with Chinese characters incorrectly.
+
+Changes to 1.37.14:
+30Apr05
+- Remove a few HAVE_TLS #ifdefs
+- Implement final Python style interface. More implemention to
+ be done, but the interface should change little if at all.
+28Apr05
+- Make default no tls support. You must add
+ --with-openssl to get tls support.
+27Apr05
+- Update Web header to include google search in the search
+ box -- thanks to input from Michel Meyers.
+- Fix md5sum so that it builds with the new openssl stuff.
+- Take some enhancements to the md5sum test program proposed
+ by a user.
+26Apr05
+- Make option 2 of restore work better (list last 20
+ locations for a file).
+- Make SD re-open a device with the right permissions if
+ it was previously opened with something different. This
+ should allow reading read-only Volumes under all circumstances.
+- Implement restore of a single directory.
+- Apply Tru64 patch supplied by Pascal Pederiva <freebsd@paped.com>
+- Apply Unicode fixes for Win32 from "Thorsten Engel"
+ <thorsten.engel@matrix-computer.com>
+- More work on Python read feature in FD.
+22Apr05
+- Fix (hopefully) the ftello() overflow reported by Peter.
+- Landon Fuller committed his TLS patch.
+- Fixed two minor warnings in console.c with TLS turned off.
+- Updated the Makefile.in for wx-windows and tray-monitor
+ to handle TLS. I can only build the tray-monitor.
+- Fix bscan to open tape in read-only mode (actually fix
+ it so that it doesn't use the standard open routine).
+- Correct what appears to be an error in setting the
+ return value in dvd.c
+21Apr05
+- Get FD Python running -- design Python backup interface.
+- Fix seg fault in SD when referencing Alert Command.
+- More documentation.
+- Fix one more thing in Win32 build.
+20Apr05
+- Doc updates
+- Fix Win32 build
+- Put in production here
+
+Changes to 1.37.13:
+19Apr05
+- Fix SQLite and PostgreSQL table creation script syntax
+ problems.
+- Fix new Python code to work for Director.
+- Move lib/python.c to lib/pythonlib.c so that debug output
+ is easier to read (can distinguish lib from dird, ...).
+- Cleanup Python build so that Python is not dragged
+ into programs that don't use it.
+
+Changes to 1.37.12:
+18Apr05
+- Make Bacula build without Python
+- Drop Status table in drop_ scripts -- bug 283.
+17Apr05
+- First cut of new Python implementation.
+- Doc updates
+- Correct SuSE autostart installation directory name --
+ supplied by a user.
+- Fix director crash if Name directive not supplied
+ in a Job.
+- More cleanup of changing %u to %s for DB IDs.
+- Replace dev_can_write(dev) with dev->can_write().
+11Apr05
+- Make fsr_dev() a method dev->fsr()
+- Remove Created new FileSet message as it always comes out in
+ the daemon messages.
+- eliminate dev_is_tape() in favor of method dev->is_tape()
+- Turn on disk seeking during restore for Disk Volumes. This
+ required some changes to bscan -- they seem a bit suspect as
+ they are not symmetrical for tape/files.
+- Remove some of the recursion in stored/parse_bsr.c
+- Move rescue out to a new Bacula project.
+08Apr05
+- Update of web site to replace old released doc with LaTeX
+ version.
+- Replace logo in doc with new bat logo.
+- Make a good number of updates to the manual.
+- Implement Python scripting using a Python object.
+ This makes interfacing with Bacula cleaner (object
+ oriented).
+- Add Phil's Status table to the database -- used
+ for getting a text description of the status
+ codes.
+- Modify FileSet so that an empty Options (no
+ pattern matching) with an exclude will exclude
+ all files.
+- Modify FileSet so that no top level included File
+ item can be excluded by a matching pattern.
+- Suppress Created new FileSet record in daemon output.
+- Implement Python in FD.
+- Turn off old bfile reader code -- to be replaced
+ by Python.
+05Apr05
+- Remove more recursion in src/dird/bsr.c as pointed out
+ by Peter.
+04Apr05
+- Increase the index width of Filename and Path entries
+ to 255 chars -- suggestion of Meno Abels.
+- Change remaining VARCHARS to TINYBLOBs.
+- Remove recursion from is_volume_selected() following
+ bug report from Peter.
+- Implement mostly correct handling of use_storage in the
+ SD with full lists, ...
+02Apr05
+- Reset NumVols in Pool record from database on every update
+ Pool.
+- Modify DB to support multiple simultaneous copies and
+ RAIT stiping.
+- Pass copy and stripe between DIR and SD and put into
+ the JobMedia DB record.
+- Update and test SQLite and MySQL datebase creation and
+ update scripts.
+- Implement version 9 of the DB.
+31Mar05
+- Convert more atoi to str_to_int64() for DB.
+- Implement filling in NumVols by querying DB rather
+ than trying to keep track of it.
+- Add storage name to string passed to in use storage=
+- Fix newVolume() so that the Python script is always
+ called.
+- Fix handling of pool,PoolId, and storage in ua_output.
+- Same fix in ua_status.c
+- Remove required locking of resources
+- Replace pthread_cond_signal() by pthread_cond_broadcast()
+ hoping to fix the /lib/tls hang problems (lost signal).
+- Move resource locking seaching from parse_conf.c to res.c
+ in src/lib.
+- Modify end of volume handling so that fixup_... does not
+ redo what block.c has already done -- writing Vol info to
+ DIR. This fixes a bug with bad numbers of files on a tape
+ when it filled as reported by Peter.
+- In release_device() do not update the DIR on the Volume
+ info if the the information was already written at the
+ end of the tape.
+28Mar05
+- NOTE!!!! This version has a new DIR <--> SD protocol. Both
+ must be updated at the same time.
+- Begin implementation of passing all the Storage and Device
+ possibilities to the SD for examination during the reserve
+ phase.
+- Modify the reserve and acquire code in the SD to make a
+ job wait if the device is not available.
+- Implement New Volume Each Job in DIR and pass to SD, not yet
+ used.
+- Remove init/update of the Device resource in DIR
+- Remove passing PoolId to SD and back.
+26Mar05
+- Remove \a and -e from error echos in most Makefiles.
+- Add more debug code when there are errors on the tape
+ to try to find Peter's tape problem.
+- Add wait.c (oops forgot previously).
+- Move all the reserve/acquire_device_for_read/append to have
+ only a DCR as the argument.
+- Rework the reserve_device_for_append() in stored to wait
+ if the drive is not available. Note! This is a short
+ term solution.
+25Mar05
+- Comment out Multiple Connections in the document.
+- Move the P() and V() to subroutines so that they can be accessed
+ from class methods. The reference to strerror() caused problems.
+- Implement new DEVICE class methods block() and unblock() that
+ do what was previously done in 3 lines of code.
+- Implement wait_for_device(), which will wait for any device
+ to be released then return. This requires a new global mutex
+ and condition variable, and is implemented in src/stored/wait.c
+- Change the code in reserve_device_for_read(), which previously
+ failed the job to use the new device wait code.
+22Mar05
+- Apply reschedule patch to 1.37 code.
+- Add copyright to title page of manual so it is clear.
+- Create patch for rescheduling problem found by Ludovic. Storage
+ pointers were lost during rescheduling.
+- Attempt to fix 2.6 rescue disk -- failed!
+- Start working on adding a wait routine in the SD.
+- Cleanup some old invalid doc in watchdog.
+- Convert a number of references to dev->dev_name to dev->print_name().
+- Add new wait.c file to SD.
+- Add a few more methods to DEVICE in SD to cleanup code a
+ bit -- implement a few of the methods.
+18Mar05
+- Fix more print_name()s for printing device name.
+- Modify open_dev to try 10 times every 6 seconds to
+ open the device if it gets an I/O error (meaning no
+ volume mounted). This gives a bit of settling in time
+ for an autochanger and avoids spurious messages.
+- Change all yes/no to yes|no in the manual.
+- Fix win32 create_file.c typo.
+- Fix a typo in an error message.
+17Mar05
+- Detect if fseeko exists with autoconf. If so, use it
+ and ftello.
+- Remove old bacula-*.conf from examples directory (out
+ of date).
+- Remove latex-fr index files from CVS.
+- Rewrite code that stops reading the tape so that the
+ tape is marked at EOT, then once the work is done,
+ the EOT flag is removed.
+- Flush output to file after every send in console.
+- Make setting VolFiles to smaller number fatal.
+- Disable Multiple Connections code.
+- Add patch from user for NetBSD statvsfs() fix to
+ fstype.c
+- Take more care with errors in acquire.c
+- Don't run through dvd code in append.c if bad status
+ returned.
+- Modify code so that an autochanger fault is fatal.
+- Use dev->print_name() in more places.
+- Implement dev->can_steal_lock() to simplify code.
+- Make btape re-read first 10000 records on fill command.
+- Check error return and fail job from fseeko and ftello
+ in spool.c. Don't let a -1 slip in as size.
+
+Changes to 1.37.7:
+15Mar05
+- Apply NetBSD patch from kardel in bug 258.
+14Mar05
+- Add a second job and a second client to the default
+ bacula-dir.conf file.
+- Remove old style Include/Excludes.
+- Fix ANSI labels to put EOF1 and EOF2 after each file mark.
+- Add Python to SD and FD.
+12Mar05
+- Implement IBM labels
+- Implement EOF and EOV labels at the end of a volume.
+- Fix a rather ugly problem with the PoolId not getting
+ passed correctly. Now the DIR passes the Pool name and
+ Media Type to the SD, who passes them back when requesting
+ the next Volume. The DIR then looks up the correct PoolId.
+ This takes more time, but always works, AND allows wild
+ card Media Types (i.e. the SD can decide).
+- The DIR <==> SD protocol has changed.
+
+Changes to 1.37.6:
+11Mar05
+- Fix scanf of PoolId in catreq to handle 64 bit Ids.
+10Mar05
+- Add new ua_update.c file and move update_cmd there.
+- Modify "update slots" to obtain actual number of slots.
+- Tweak autochanger code to handle new slots request.
+- Modify autochanger code to lock/unlock around slots and
+ update slots code.
+09Mar05
+- Patch the FD so that it does not issue an error message if
+ it attempts to restore the permissions on a Win32 drive.
+- Edit "Resource-name" (physical-name) for the device name
+ everywhere in the SD.
+- Remove .linked.tex files in preparation for cutover to
+ using .tex in place of .wml.
+08Mar05
+- Copy latest config.sub and config.guess from autoconf.
+- Try new way of identifying drives with:
+ "resource-name" (physical-name)
+ More work need to a complete conversion.
+07Mar05
+- Rework some of the autochanger data so that the DIR has
+ the number of drives.
+- Modify the way the Device info is returned so that it comes
+ back as a special message type and can be sent anytime the
+ Device status changes.
+- Copy the change name and changer command into the device
+ record if none is specified.
+- Require the change command and changer name to be specified in
+ and AutoChanger resource.
+- Force all the Media Type records of all devices in an Autochanger
+ to be the same.
+06Mar05
+- Add new "run" command to Job resource in DIR. This permits
+ cloning a job as many times as you want.
+- Pass PoolId to SD on Query request. It is now used in the
+ Find_media catalog request.
+- Reworked the Device resource in the DIR. Eliminated num_waiting
+ and use_count, but added max_writers, reserved, and PoolId.
+- This DIR is nolonger compatible with previous SDs.
+- Add since and cloned keywords to the Console run command
+ to support cloning.
+- Implemented store_alist_str() to allow multiple string items
+ to be specified in a .conf file.
+- Added %s (since time) to Job code editing.
+- Reworked reserving drives in the SD. It now does it much simpler
+ and correctly.
+05Mar05
+- Integrate HP-UX patch from Olivier Mehani <olivier.mehani@linbox.com>
+- Fix FD job.c to test correctly for no level.
+
+Changes to 1.37.4:
+04Mar05
+- Change Developers to Developer's Guide as requested by Michael.
+- Fix developers link in manual
+- Add additional dcr changes in SD to allow multiple dcrs.
+02Mar05
+- Fix a few problems with the MySQL table create in 1.37.
+- Delete the new tables in the table delete files.
+- Increase the number of items permitted in a conf table.
+- Make Director loop over alternative Devices specified in the
+ Storage resource until one is reserved by SD.
+- Fix storing of StorageId in Media records.
+- Add AutoSelect = yes|no in bacula-sd.conf
+- Add Autochanger support to Label command.
+- Do not autoselect devices with autoselect set false
+01Mar05
+- Implement setting DIR Storage device to Autochanger
+ name.
+- Select first available device in Autochanger.
+- Pass back actual device name used.
+- Allow Query of AutoChanger.
+- Modify Query to include name of AutoChanger if
+ Device belongs to one.
+- Remove old Pool code in jobq.c
+- Add Autoselect flag to query and DEVICE class (still
+ need Directive).
+28Feb05
+- Lock autochanger script when running.
+- Mark Volume not InChanger if correct volume is not
+ autoloaded.
+- Corrected some typos in the make_xxx_tables.in files.
+- Made preliminary split of pre-run and run code for each
+ job type. This will permit early opening of SD for reserving
+ drives.
+- Add offline and autochanger fields to Device Query record.
+- Correct pthread_mutex_init() for autochanger in SD.
+- Tweak Makefile for LaTeX manual, plus add nav buttons.
+26Feb05
+- Clean up drive reservation system. Add more sanity checks.
+- Implement a few more methods for the DEVICE class in SD.
+- Add latex directories to make clean
+- move DEV_BSIZE to B_DEV_BSIZE to avoid conflicts with
+ certain header files (FreeBSD).
+24Feb05
+- Fix an ASSERT that was triggering in stored/acquire.c
+ attempt to fix a bug report.
+23Feb05
+- Corrected SunOs to SunOS in btraceback (user submitted).
+- Applied patch from Roger Håkansson <hson@ludd.luth.se>
+ to warn the user of defective AWKs during ./configure.
+20Feb05
+- Add some changes submitted by a user for HP client build.
+ Not all changes accepted.
+- Rework code in filed/backup.c to ease #ifdefing and make
+ program flow more obvious.
+- Split DVD code out of dev.c into dvd.c
+- Tweak #ifdefing to add back all the performance measurement
+ #defines in version.h
+- Put most of MTIOCGET code in a subroutine to simplify the
+ mainline code.
+- Make clean remove old CVS files
+- Remove unnecessary image files from Latex directory
+- Implement remaining parts of Storage DB record and
+ its use in the Director.
+- Implement
+ FullMaxWaitTime, Differential Max Wait Time, and
+ Incremental Max Wait time in Job resource.
+- Start work on SD Autochanger code.
+19Feb05
+- Add back JobId index for MySQL as default -- speeds up
+ pruning.
+- Add more database fields and fix the update scripts to
+ include the new items.
+- Pass actual level to FD so that ClientRun editing can reflect
+ correct level -- ditto for job status. This makes the DIR
+ incompatible with older clients!
+- Move jobq.c acquire resources to static subroutine so that
+ the code logic becomes clearer. This is in preparation for
+ actually using the new Device resources.
+- Fix some lower case problems in sql_cmds.c reported by
+ Debian.
+- Correct a seg fault in the SD reported by a user. Occurred
+ only when a high debug level was set.
+- Modify init_dev() in dev.c to take JCR as first arg so that
+ proper error messages can be reported in next item.
+- Modify the query and use device SD commands to attempt to
+ open the device if it could not previously be opened.
+- Correct error message for Could not reserve device.
+- Correct some minor details with Autochanger resource in SD.
+18Feb05
+- Fix seg fault if debug level 900 set in SD.
+- Truncate Win32 child return code to 8 bits.
+- Remove some old lld's.
+
+Changes to 1.37.3:
+16Feb05
+- Make another attempt at fixing the ClientRunXXX return code
+ bug on Win32 machines.
+- Apply ua_status patch from Carsten Paeth <calle@calle.in-berlin.de>
+ which enforces console ACLs in the status command for Jobs.
+15Feb05
+- Fix Media LabelDate and FirstWritten to be correctly set.
+- Fix deadlock in multiple simultaneous jobs.
+- Fix tape "truncation"/"number of files" after restore bug.
+10Feb05
+- Ensure that correct error messages are returned when
+ reading an ANSI label.
+09Feb05
+- Modified ANSI label code to preserve any ANSI label
+ already found by skipping over it rather than rewriting
+ it.
+- Split the ANSI label code into ansi_label.c
+- Do not let user relabel an ANSI labeled tape.
+- Applied a patch for the console help command supplied
+ in a bug report.
+- Added some new dev methods. Most notably was
+ set_eof(), which handles setting all the dev variables
+ when an EOF is just read. This is now used most everywhere
+ in the code.
+07Feb05
+- Added code to detect that no files were inserted into the
+ tree for a restore. If a specific JobId was specified, the
+ user has the option of restoring everything.
+- More progress in implementing 64 bit DB Ids.
+- Modified the daemon start messages for RH.
+- Implement update scripts for all database types.
+- First cut at implementing restore directory (it will not
+ recurse).
+04Feb05
+- OK, I think ANSI labels work.
+- Added Label Type = ANSI|IBM|Bacula to Device resource in SD.
+ If this is set, it will force writing of the appropriate
+ label type.
+- Added Check Labels = yes|no to Device resource in SD. If this
+ is set, Bacula will check for ANSI labels and accept them,
+ otherwise, ANSI labels will not be accepted when the tape
+ is first mounted.
+02Feb05
+- Second cut ANSI labels.
+01Feb05
+- Merge Preben's patch for ACLs and for Mac OS X resource forks.
+- Some doc updates.
+- Display more informative message when a device was not
+ found or could not be opened.
+- Add the sqlite3 database scripts.
+- Add some patches for 1.36.1 (note, I have now prepared
+ a 1.36.2 with all the patches and some new features --
+ to be documented).
+- Some minor doc updates.
+- Add Arno's baculareport.pl script to the examples directory.
+29Jan05 -- after vacation
+- Add support for SQLite3 (it seems to run at 1/2 the speed
+ of SQLite2). Use --with-sqlite3 instead of --with-sqlite
+ to get SQLite3.
+- Add target for running qemu to boot Rescue CDROM
+- Add code to support kernel 2.6 in Rescue CDROM -- does NOT yet
+ boot correctly.
+- Implement ANSI labels -- not yet tested.
+ This required changes to DB format. No upgrade script yet.
+ Note, more work needed to modify "update" command to handle
+ changing label types, also must restrict volume name lengths
+ to 6 characters.
+- Add new Device, Storage, and MediaType records to DB. No
+ upgrade script yet.
+- Add MediaType to bsr file record types. Not yet used in SD.
+- Permit multiple device specifications in Storage resource in
+ Dir conf file.
+- Implement Device resources. Director requests Device resource
+ info from SD on startup.
+- Note!!!! DIR->SD incompatible with previous versions.
+- Remove multiple Storage definitions in Job resource. One can
+ still specify multiple Storage resources, but they all go into
+ a single alist, and imply sending data to each Storage daemon
+ simultaneously.
+- Implement Device query command between DIR and SD.
+- Allow DIR to "reserve" a Device. It will then be acquired
+ when the FD connects to the SD.
+- Turn all DIR resources into classes, and implement a few class
+ methods -- more to come.
+- Turn DEVICE in SD into a class, and implement a number of inline
+ class methods -- more to come.
+- I had serious problems with ACL errors on my Laptop, and so had
+ to add the following patch:
+ @@ -181,7 +181,7 @@
+ }
+ /***** Do we really want to silently ignore errors from acl_get_file
+ and acl_to_text? *****/
+ - return -1;
+ + return 0;
+ }
+- Added edit_int64()
+- Reworked and tested a bit the htable routines.
+- Major changes to SD acquire.c -- DIR can now reserve devices. Needs
+ lots of testing!!!!
+- Made a special state code for DVD -- this simplifies the logic
+ of the code, but I probably broke it. Testing needed!!!!
+- Add AutoChanger resource to SD, but not yet used.
+
+Changes to 1.37.2:
+12Jan05
+- Integrate Preben 'Peppe' Guldberg <peppe@wielders.org>'s
+ acl patch. Fix case where configured but no ACL exists.
+ Rework calling arguments to be shorter and positioned
+ more typically in Bacula usage.
+11Jan05
+- Fix scripts/bacula.in to have awk on an environment variable
+ and add comments for Solaris users.
+- Turn off inet_aton in src/lib/address_conf.c for Win32
+- Add new files to win32 build and eliminate a compiler warning.
+- Add sample DVD Device resource to bacula-sd.conf
+08Jan05
+- Integrate Nicolas' patch for direct DVD support.
+07Jan05
+- Fix fstype error returns.
+- Apply Preben's cleanup.patch which puts back much of the
+ cleanup code in src/filed/restore.c
+06Jan05
+- Apply all of Preben's patches, but revert to old backup.c
+ and old restore.c in filed. Also turn off code in new
+ acl.c because of errors. The new code, when fully implemented
+ moves platform specific code into acl.c.
+ One of the patches also implements WildFile and WildDir -- thanks.
+01Jan05
+- Implement Python in the SD (no events yet though).
+- Fix some typos in the previous commit.
+30Dec04
+- Enhance CDROM boot to include some documentation at boot time.
+- NOTE!!!!! The CDROM will not boot 2.6 kernels because the
+ boot sequence has changed significantly. Updates to come
+ later.
+- Add memtest option to CDROM boot.
+- Include Nicolas' changes to fix llist JobMedia records.
+- Make sure that ClientRunBefore/After messages from the program
+ are terminated with a newline. Add strerror to output error
+ messages.
+- Return program exit status code in Win32.
+29Dec04
+- Add memtest86 to Bacula Rescue disk
+- Enhance Rescue disk startup screen
+24Dec04
+- Move some variables to eliminate Solaris 2.6 compiler warnings.
+- Fix the seg fault at the end of a job in the FD when using
+ old style include/excludes.
+22Dec04
+- Apply Preben's ACL patch.
+- Integrate Preben's restore patch.
+- Integrate Preben's verify teaks.
+- Fix doc/latex/Makefile to copy/remove .eps files when building
+ html and web outputs.
+21Dec04
+- Fix Bacula so that it does not exit if there is a syntax error
+ in its conf file during a reload command. Bug 182.
+- Apply fixes suggested for old Solaris networking.
+ Fixes bug 190.
+- Apply Preben 'Peppe' Guldberg <peppe@wielders.org>
+ three patches that clean up white space:
+ ws.patch.02.strings:
+ Breaks strings that span lines into concatenated strings. I am not sure
+ if you like this one. Other code works with concatenated strings, though.
+ ws.patch.03.trailing:
+ This removes trailing whitespace. No changes resulted from this for
+ my setup.
+ ws.patch.04.leading:
+ This replaces space runs at the start of line with tabs. No changes
+ again.
+- Fix overriding storage specification to be done
+ through a subroutine.
+- Fix autoconf so it runs with FC3.
+- Add Python4.3 to configure search paths.
+- Always copy and delete storage definitions into jcr.
+- Check that VolumeName supplied by Python is valid.
+ Return 0 if not.
+19Dec04
+- Fix undefined in non-Python build.
+- Update rescue disk to include mkinitrd
+- Fix umount_drives in rescue disk (only one arg to umount)
+- Ensure that if SD is manually set in Console, it is used.
+- Put generate_event on pointer and plug it in init. This
+ permits using it in /lib
+- Correct despooling size reported to be Job specific rather
+ than for the whole drive.
+18Dec04
+- Fix bug 207. jcr use count off by one when manually
+ scheduling jobs.
+- Remove FNMATCH test in configure.in and always use
+ the one in our library to get the FN_CASEFOLD GNU
+ extensions on all platforms.
+- While using the rescue CDROM after my computer would not
+ boot, I realized that it would be very useful to have
+ a umount_disks. So, it is not implemented, along with
+ updates to the READMEs and some minor tweaks.
+- Moved mounting the CDROM in the rescue boot from /cdrom
+ to /mnt/cdrom (more standard location).
+- Reboot in CDROM rescue should now work -- requires -d
+ option (no write) to work.
+- Hopefully fixed all the IPV6/4 problems and buffer
+ problems with networking in lib. Bugs 190 and 204.
+ Cleaned up a lot of #ifdefing problems by using routines
+ in address_conf.c
+17Dec04
+- Apply Preben 'Peppe' Guldberg <peppe@wielders.org>
+ alist fix patch.
+- Remove duplicate code from chksum.h (mentioned by Preben).
+13Dec04
+- Integrate Tim Oberfoell <oberfoell@web.de> patch to ACLs
+ to handle both the "standard" and "default" ACLs.
+12Dec04
+- Integrated Preben 'Peppe' Guldberg <peppe@wielders.org>
+ three cleanup patches (btest, verify, find).
+- Integrated Preben 'Peppe' Guldberg <peppe@wielders.org>
+ three cleanup patches (backup, chksum, and verify)
+09Dec04
+- Integrated Preben 'Peppe' Guldberg <peppe@wielders.org>
+ patch to avoid doing MTIOCGET on OSes that do not support
+ it such as OpenBSD.
+- Integrated Preben 'Peppe' Guldberg <peppe@wielders.org>
+ patch to add filesystem type matching to FileSets in the
+ Options resource.
+- Integrated Preben 'Peppe' Guldberg <peppe@wielders.org>
+ patch to add Mac OSX resource fork support (save/restore)
+ to Bacula -- HFS Plus support.
+- Add FileSet to client Job listing query.
+06Dec04
+- Integrated Preben 'Peppe' Guldberg <peppe@wielders.org>
+ patch to backup directories skipped (due to no file system
+ changes or no recursion), and to add a slash to the end
+ of the directory name during the match process.
+- Implement Jamie ffolliott <jamieff@inline.net>
+ patch to dird_conf.c that enables Multiple Connections and
+ fixes a typo in show. The rest of his patch awaits my suggested
+ changes.
+05Dec04
+- Implement run command in Python
+04Dec04
+- Implement conversion of the manual, and some minor
+ tweaks to the script tags.
+- Apply a patch supplied by Preben 'Peppe' Guldberg that implements
+ ignore case in wild cards and regexes.
+- Fix a truncated line in the above patch due to my cut and paste.
+03Dec04
+- Fix it so that the InChanger flag is only changed for Volumes
+ in the same Pool.
+- Add PIDOF configuration path and apply to bacula.in
+- Add user supplied patch to add inet_aton() of old Solaris
+ systems.
+- Require pools to match before allowing multiple simultaneous
+ accesses to same storage resource.
+- Add patch supplied by Martin to correct buffer overrun in
+ bsnprintf() with no library snprintf().
+02Dec04
+- Apply user supplied patch that implements No Hard Links.
+- Document Python interface
+- Add hardlink keyword patch supplied by David R Bosso <dbosso@lsit.ucsb.edu>
+01Dec04
+- Fix non-python prototypes in dummy routines.
+- Add python 2.3 to config search list (user submitted patch)
+- Add JobStatus to Python variables.
+28Nov04
+- Add "python restart" command in Console.
+- Make built-in variables table driven.
+- First cut of Python Events for Bacula. Director only.
+ StartJob, EndJob, NewVolume events.
+
+Version 1.36.1 Released 26Nov04:
+24Nov04
+- Take Dan's fix to the fix_postgresql_tables (thanks Dan)
+- Increase Maximum Concurrent Jobs to 20 in SD and FD!
+- Fix improper handling of autochanger Volumes that are not
+ marked InChanger. Bug 170.
+22Nov04
+- Update authentication failure message to indicate possible
+ problem with Maximum Concurrent Jobs. Add to doc too.
+- Commit PostgreSQL BIGINT fix -- apparently some people didn't
+ get it.
+- Do not use a slot unless it is InChanger in the autochanger
+ code, otherwise autochanger gets upset not finding the Volume.
+ Bug 170 (need fix above too).
+21Nov04
+- Make authentication timeout compile time configurable.
+ The value is set in src/baconfig.h
+- Fix removing items from watchdog queue, which apparently
+ screwed up if there was more than one item.
+- Rework mediaformat part of manual to separate out old
+ tape format for easier reading.
+- Add a lot of debug code to the authentication code.
+- Add seconds to the start/end times printed in the job report.
+19Nov04
+- Fix mutex deadlock in dequeue of messages.
+- Add debug code to FD authorization.
+18Nov04
+- Increase authentication timeouts to 10 minutes.
+15Nov04
+- Fix cancel bug in FD on /lib/tls with zero pid in
+ pthread_kill.
+- Add date/time to all messages.
+- Make Qmsg use time message was queued rather than time
+ printed.
+- Indent job output two spaces.
+13Nov04
+- Fix web page links for new manual.
+- Grant postgresql permission to cdimages.
+- Correct crash after "list nextvol" "list media" bug 160
+12Nov04
+- Fix scripts/Makefile.in missing ;\ -- thanks Martin
+- A bit of work on btape to keep if from going into infinite
+ loops when things do not work well, and to print a bit
+ better info.
+11Nov04
+- JobDefs Storage resource completely overrode anything
+ specified in Job resource -- bug 159 -- fixed.
+- Fix syntax of renaming postgresql per Dan.
+- Add working_directory to be /tmp for wx_console.
+10Nov04
+- Allow both a JobId and a filename or list of files to be
+ specified on a restore command line.
+- Save old mtx-changer before installing new one: bug 156
+- Fix errors in CDROM file pointed out by Scott.
+09Nov04
+- Fix exepath when Bacula executed without path.
+- Move test for socket libraries for Solaris in configure.in
+ before tcp wrapper tests so that linking works.
+- Add "make copy-static-fd" to makefile in CDROM file to
+ copy existing static fd to CDROM rather than building it.
+08Nov04
+- More doc updates
+- Fix ps command for OpenBSD
+- Rework the creation of indexes for SQL -- fall back
+ to the old code, but document what can be added.
+06Nov04
+- Add new Daemon message handler in default DIR conf.
+05Nov04
+- Fix Seg Fault with -D100 in bpipe.c.
+- Fix Seg Fault in run specifying a JobId.
+- Make mail from daemon with a Messages Resource use
+ the MailCommand with editing rather than the default
+ sendmail.
+- Replace Jmsg in dispatch_message() with Qmsg.
+- Make edit_job_codes handle NULL jcr.
+04Nov04
+- Add M_ALERT class and put tape alerts into it.
+- Fix Verify count vs found by not double counting files
+ that are split across files/Volumes.
+30Oct04
+- Fix count returned from write_bsr_file() to handle multiple
+ volumes. This fixes most cases of the Verify VolumeToCatalog.
+- Cleanup a bit the make clean for the rescue cdrom and remove
+ unneeded files from the CVS.
+28Oct04
+- Fixed acquiring a tape so that it does not block all acquires
+ when operator intervention is needed.
+- Platform build script updates from Scott
+- Doc updates
+- Add patch to force Linux LD_ASSUME_KERNEL to avoid using the
+ new /lib/tls. This is done in the startup scripts.
+- Modify mtx-changer so that it checks for ONLINE while
+ waiting.
+- Modify make_postgresql_tables.in so that EndBlock is stored
+ as a bigint. Prevents job failures when a disk volume is
+ larger than 2GB.
+24Oct04
+- Add grep ONLINE to wait_for_drive() in mtx-changer.in
+- More doc.
+- Rebuild Scott's new configure
projects / bacula / docs / commitdiff