+#
+# You must define certain environment variables in this file
+# so that the scripts know where to find things.
+#
+
+CWD=`pwd`
+
+#
+# Set your home directory here (do not use $HOME !!!)
+# This is used when coping your desktop files to the
+# USB key.
+#
+MY_HOME=
+
+#
+# The device name of your USB device (e.g. /dev/sda)
+# You can find it by plugging it in then doing
+#
+# fdisk -l
+#
+# If you are unsure remove the USB device and rerun the fdisk -l
+# If you get this wrong, your harddisk could be wiped out.
+# It is probably "/dev/sda" or "/dev/sdb" or "/dev/sdc", however, on my latest
+# machine (HP Pavilion), it is /dev/sdg (see the lsscsi listing below)
+#
+# [0:0:0:0] disk ATA WDC WD6400AAKS-6 01.0 /dev/sda
+# [1:0:0:0] cd/dvd HL-DT-ST BDDVDRW GBC-H20L 1.B8 /dev/scd0
+# [2:0:0:0] disk ATA WDC WD6400AAKS-6 01.0 /dev/sdb
+# [6:0:0:0] disk Generic- Compact Flash 1.00 /dev/sdc
+# [6:0:0:1] disk Generic- SM/xD-Picture 1.00 /dev/sdd
+# [6:0:0:2] disk Generic- SD/MMC 1.00 /dev/sde
+# [6:0:0:3] disk Generic- MS/MS-Pro 1.00 /dev/sdf
+# [7:0:0:0] disk Crucial Gizmo! 1100 /dev/sdg
+#
+USB_DEV=
+
+#
+# When your USB key is mounted, what is the mount directory?
+#
+MOUNT_POINT=/media
+
+#
+# This is where you downloaded the USB boot image
+#
+BOOT_IMAGE=${CWD}/kubuntu8.tar.gz
+
+#
+# Disk image of boot partition of USB key -- this is where you
+# unpacked the kubuntu8.tar.bz2 image. Unpacking the image
+# is not necessary unless you want to change it.
+#
+DISK_IMAGE=${CWD}/kubuntu8
+
+#
+# If you are remastering a Ubuntu or Kubuntu ISO (not normally done)
+# Point to the ISO image
+# Used when picking apart a new ISO (i.e. upgrade or something)
+#
+ISO_IMAGE=
+
+#
+# Partition 1 (kubuntu) size
+#
+SIZE_PART1="+750M"
+
+#
+# Partition 2 (casper-rw) size
+#
+SIZE_PART2="+1000M"
+
+#
+# Partition 3 uses whatever is left on the USB key
projects / bacula / rescue / blobdiff