2 FreeRTOS V8.0.0 - Copyright (C) 2014 Real Time Engineers Ltd.
\r
5 VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
\r
7 ***************************************************************************
\r
9 * FreeRTOS provides completely free yet professionally developed, *
\r
10 * robust, strictly quality controlled, supported, and cross *
\r
11 * platform software that has become a de facto standard. *
\r
13 * Help yourself get started quickly and support the FreeRTOS *
\r
14 * project by purchasing a FreeRTOS tutorial book, reference *
\r
15 * manual, or both from: http://www.FreeRTOS.org/Documentation *
\r
19 ***************************************************************************
\r
21 This file is part of the FreeRTOS distribution.
\r
23 FreeRTOS is free software; you can redistribute it and/or modify it under
\r
24 the terms of the GNU General Public License (version 2) as published by the
\r
25 Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.
\r
27 >>! NOTE: The modification to the GPL is included to allow you to distribute
\r
28 >>! a combined work that includes FreeRTOS without being obliged to provide
\r
29 >>! the source code for proprietary components outside of the FreeRTOS
\r
32 FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
\r
33 WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
\r
34 FOR A PARTICULAR PURPOSE. Full license text is available from the following
\r
35 link: http://www.freertos.org/a00114.html
\r
39 ***************************************************************************
\r
41 * Having a problem? Start by reading the FAQ "My application does *
\r
42 * not run, what could be wrong?" *
\r
44 * http://www.FreeRTOS.org/FAQHelp.html *
\r
46 ***************************************************************************
\r
48 http://www.FreeRTOS.org - Documentation, books, training, latest versions,
\r
49 license and Real Time Engineers Ltd. contact details.
\r
51 http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
\r
52 including FreeRTOS+Trace - an indispensable productivity tool, a DOS
\r
53 compatible FAT file system, and our tiny thread aware UDP/IP stack.
\r
55 http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High
\r
56 Integrity Systems to sell under the OpenRTOS brand. Low cost OpenRTOS
\r
57 licenses offer ticketed support, indemnification and middleware.
\r
59 http://www.SafeRTOS.com - High Integrity Systems also provide a safety
\r
60 engineered and independently SIL3 certified version for use in safety and
\r
61 mission critical applications that require provable dependability.
\r
67 BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART0.
\r
70 /* Library includes. */
\r
71 #include "75x_uart.h"
\r
72 #include "75x_gpio.h"
\r
73 #include "75x_eic.h"
\r
74 #include "75x_mrcc.h"
\r
76 /* Scheduler includes. */
\r
77 #include "FreeRTOS.h"
\r
80 /* Demo application includes. */
\r
83 #define serINVALID_QUEUE ( ( QueueHandle_t ) 0 )
\r
84 #define serNO_BLOCK ( ( TickType_t ) 0 )
\r
86 /*-----------------------------------------------------------*/
\r
88 /* Queues used to hold received characters, and characters waiting to be
\r
90 static QueueHandle_t xRxedChars;
\r
91 static QueueHandle_t xCharsForTx;
\r
93 static volatile portBASE_TYPE xQueueEmpty = pdTRUE;
\r
95 /*-----------------------------------------------------------*/
\r
97 /* The interrupt service routine - called from the assembly entry point. */
\r
98 __arm void vSerialISR( void );
\r
100 /*-----------------------------------------------------------*/
\r
103 * See the serial2.h header file.
\r
105 xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
\r
107 xComPortHandle xReturn;
\r
108 UART_InitTypeDef UART_InitStructure;
\r
109 GPIO_InitTypeDef GPIO_InitStructure;
\r
110 EIC_IRQInitTypeDef EIC_IRQInitStructure;
\r
112 /* Create the queues used to hold Rx and Tx characters. */
\r
113 xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
\r
114 xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
\r
116 /* If the queues were created correctly then setup the serial port
\r
118 if( ( xRxedChars != serINVALID_QUEUE ) && ( xCharsForTx != serINVALID_QUEUE ) )
\r
120 portENTER_CRITICAL();
\r
122 /* Enable the UART0 Clock. */
\r
123 MRCC_PeripheralClockConfig( MRCC_Peripheral_UART0, ENABLE );
\r
125 /* Configure the UART0_Tx as alternate function */
\r
126 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
\r
127 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;
\r
128 GPIO_Init(GPIO0, &GPIO_InitStructure);
\r
130 /* Configure the UART0_Rx as input floating */
\r
131 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
\r
132 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
\r
133 GPIO_Init(GPIO0, &GPIO_InitStructure);
\r
135 /* Configure UART0. */
\r
136 UART_InitStructure.UART_WordLength = UART_WordLength_8D;
\r
137 UART_InitStructure.UART_StopBits = UART_StopBits_1;
\r
138 UART_InitStructure.UART_Parity = UART_Parity_No;
\r
139 UART_InitStructure.UART_BaudRate = ulWantedBaud;
\r
140 UART_InitStructure.UART_HardwareFlowControl = UART_HardwareFlowControl_None;
\r
141 UART_InitStructure.UART_Mode = UART_Mode_Tx_Rx;
\r
142 UART_InitStructure.UART_TxFIFOLevel = UART_FIFOLevel_1_2; /* FIFO size 16 bytes, FIFO level 8 bytes */
\r
143 UART_InitStructure.UART_RxFIFOLevel = UART_FIFOLevel_1_2; /* FIFO size 16 bytes, FIFO level 8 bytes */
\r
144 UART_Init(UART0, &UART_InitStructure);
\r
146 /* Enable the UART0 */
\r
147 UART_Cmd(UART0, ENABLE);
\r
149 /* Configure the IEC for the UART interrupts. */
\r
150 EIC_IRQInitStructure.EIC_IRQChannelCmd = ENABLE;
\r
151 EIC_IRQInitStructure.EIC_IRQChannel = UART0_IRQChannel;
\r
152 EIC_IRQInitStructure.EIC_IRQChannelPriority = 1;
\r
153 EIC_IRQInit(&EIC_IRQInitStructure);
\r
155 xQueueEmpty = pdTRUE;
\r
156 UART_ITConfig( UART0, UART_IT_Transmit | UART_IT_Receive, ENABLE );
\r
158 portEXIT_CRITICAL();
\r
162 xReturn = ( xComPortHandle ) 0;
\r
165 /* This demo file only supports a single port but we have to return
\r
166 something to comply with the standard demo header file. */
\r
169 /*-----------------------------------------------------------*/
\r
171 signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed char *pcRxedChar, TickType_t xBlockTime )
\r
173 /* The port handle is not required as this driver only supports one port. */
\r
176 /* Get the next character from the buffer. Return false if no characters
\r
177 are available, or arrive before xBlockTime expires. */
\r
178 if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
\r
187 /*-----------------------------------------------------------*/
\r
189 void vSerialPutString( xComPortHandle pxPort, const signed char * const pcString, unsigned short usStringLength )
\r
191 signed char *pxNext;
\r
193 /* A couple of parameters that this port does not use. */
\r
194 ( void ) usStringLength;
\r
197 /* NOTE: This implementation does not handle the queue being full as no
\r
198 block time is used! */
\r
200 /* The port handle is not required as this driver only supports UART0. */
\r
203 /* Send each character in the string, one at a time. */
\r
204 pxNext = ( signed char * ) pcString;
\r
207 xSerialPutChar( pxPort, *pxNext, serNO_BLOCK );
\r
211 /*-----------------------------------------------------------*/
\r
213 signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed char cOutChar, TickType_t xBlockTime )
\r
215 portBASE_TYPE xReturn;
\r
217 /* Place the character in the queue of characters to be transmitted. */
\r
218 portENTER_CRITICAL();
\r
220 if( xQueueEmpty == pdTRUE )
\r
222 UART0->DR = cOutChar;
\r
227 if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
\r
237 xQueueEmpty = pdFALSE;
\r
239 portEXIT_CRITICAL();
\r
243 /*-----------------------------------------------------------*/
\r
245 void vSerialClose( xComPortHandle xPort )
\r
247 /* Not supported as not required by the demo application. */
\r
249 /*-----------------------------------------------------------*/
\r
251 __arm void vSerialISR( void )
\r
254 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
258 if( UART0->MIS & UART_IT_Transmit )
\r
260 /* The interrupt was caused by the THR becoming empty. Are there any
\r
261 more characters to transmit? */
\r
262 if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xHigherPriorityTaskWoken ) == pdTRUE )
\r
264 /* A character was retrieved from the queue so can be sent to the
\r
270 xQueueEmpty = pdTRUE;
\r
273 UART_ClearITPendingBit( UART0, UART_IT_Transmit );
\r
276 if( UART0->MIS & UART_IT_Receive )
\r
278 /* The interrupt was caused by a character being received. Grab the
\r
279 character from the RHR and place it in the queue of received
\r
282 xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
\r
283 UART_ClearITPendingBit( UART0, UART_IT_Receive );
\r
285 } while( UART0->MIS );
\r
287 /* If a task was woken by either a character being received or a character
\r
288 being transmitted then we may need to switch to another task. */
\r
289 portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
\r