[freertos] / FreeRTOS / Demo / CORTEX_Kinetis_K60_Tower_IAR / main-full.c

/*\r
 * FreeRTOS Kernel V10.2.1\r
 * Copyright (C) 2019 Amazon.com, Inc. or its affiliates.  All Rights Reserved.\r
 *\r
 * Permission is hereby granted, free of charge, to any person obtaining a copy of\r
 * this software and associated documentation files (the "Software"), to deal in\r
 * the Software without restriction, including without limitation the rights to\r
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of\r
 * the Software, and to permit persons to whom the Software is furnished to do so,\r
 * subject to the following conditions:\r
 *\r
 * The above copyright notice and this permission notice shall be included in all\r
 * copies or substantial portions of the Software.\r
 *\r
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\r
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS\r
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR\r
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER\r
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN\r
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.\r
 *\r
 * http://www.FreeRTOS.org\r
 * http://aws.amazon.com/freertos\r
 *\r
 * 1 tab == 4 spaces!\r
 */\r
\r
/*\r
 * main-blinky.c is included when the "Blinky" build configuration is used.\r
 * main-full.c is included when the "Full" build configuration is used.\r
 *\r
 * main-full.c (this file) defines a comprehensive demo that creates many\r
 * tasks, queues, semaphores and timers.  It also demonstrates how Cortex-M3\r
 * interrupts can interact with FreeRTOS tasks/timers, a simple web server, and\r
 * run time statistics gathering functionality.  ***IF YOU ARE LOOKING FOR A\r
 * SIMPLER STARTING POINT THEN USE THE "BLINKY" BUILD CONFIGURATION FIRST.***\r
 *\r
 * If the Ethernet functionality is excluded, then this demo will run 'stand\r
 * alone' (without the rest of the tower system) on the TWR-K60N512 tower\r
 * module.  If the Ethernet functionality is included, then the full Freescale\r
 * K60 tower kit, including both the TWR-K60N512 and TWR-SER modules, is\r
 * required (as the Ethernet connector is on the TWR-SER).  The TWR-K60N512 is\r
 * populated with a K60N512 Cortex-M4 microcontroller.\r
 *\r
 * The main() Function:\r
 * main() creates four demo specific software timers, and one demo specific\r
 * task (the web server task).  It also creates a whole host of 'standard\r
 * demo' tasks/queues/semaphores/timers, before starting the scheduler.  The\r
 * demo specific tasks and timers are described in the comments here.  The\r
 * standard demo tasks are described on the FreeRTOS.org web site.\r
 *\r
 * The standard demo tasks provide no specific functionality.  They are\r
 * included to both test the FreeRTOS port, and provide examples of how the\r
 * various FreeRTOS API functions can be used.\r
 *\r
 * This demo creates 37 persistent tasks, then dynamically creates and destroys\r
 * another two tasks as the demo executes.\r
 *\r
 *\r
 * The Demo Specific "LED" Timers and Callback Function:\r
 * Two very simple LED timers are created.  All they do is toggle an LED each\r
 * when the timer callback function is executed.  The two timers share a\r
 * callback function, so the callback function parameter is used to determine\r
 * which timer actually expired, and therefore, which LED to toggle.  Both\r
 * timers use a different frequency, one toggles the blue LED and the other the\r
 * green LED.\r
 *\r
 * The LED/Button Software Timer and the Button Interrupt:\r
 * The user button SW2 is configured to generate an interrupt each time it is\r
 * pressed.  The interrupt service routine switches the orange/yellow LED on,\r
 * and resets the LED software timer.  The LED timer has a 5000 millisecond (5\r
 * second) period, and uses a callback function that is defined to just turn the\r
 * LED off again.  Therefore, pressing the user button will turn the LED on, and\r
 * the LED will remain on until a full five seconds pass without the button\r
 * being pressed.\r
 *\r
 * The Demo Specific "Check" Timer and Callback Function:\r
 * The check timer period is initially set to three seconds.  The check timer\r
 * callback function checks that all the standard demo tasks are not only still\r
 * executing, but are executing without reporting any errors.  If the check\r
 * timer discovers that a task has either stalled, or reported an error, then it\r
 * changes its own period from the initial three seconds, to just 200ms.  The\r
 * check timer callback function also toggles the orange/red LED each time it is\r
 * called.  This provides a visual indication of the system status:  If the LED\r
 * toggles every three seconds, then no issues have been discovered.  If the LED\r
 * toggles every 200ms, then an issue has been discovered with at least one\r
 * task.  The last reported issue is latched into the pcStatusMessage variable,\r
 * and displayed at the bottom of the "task stats" web page served by the\r
 * embedded web server task.\r
 *\r
 * The web server task:\r
 * The web server task implements a simple embedded web server that includes\r
 * CGI scripting.  Pages are provided that allow task statistics, network\r
 * statistics and run time statistics to be viewed.  In addition, an IO page is\r
 * served that allows the orange/yellow LED to be turned on and off.  Finally,\r
 * a page is included that serves a large jpg file.  See the documentation page\r
 * for this demo on the http://www.FreeRTOS.org web site for web server\r
 * configuration and usage instructions.\r
 *\r
 * The Demo Specific Idle Hook Function:\r
 * The idle hook function demonstrates how to query the amount of FreeRTOS heap\r
 * space that is remaining (see vApplicationIdleHook() defined in this file).\r
 *\r
 * The Demo Specific Tick Hook Function:\r
 * The tick hook function is used to test the interrupt safe software timer\r
 * functionality.\r
 *\r
 */\r
\r
/* Kernel includes. */\r
#include "FreeRTOS.h"\r
#include "task.h"\r
#include "queue.h"\r
#include "timers.h"\r
\r
/* Freescale includes. */\r
#include "common.h"\r
\r
/* Common demo includes. */\r
#include "partest.h"\r
#include "flash.h"\r
#include "BlockQ.h"\r
#include "death.h"\r
#include "blocktim.h"\r
#include "semtest.h"\r
#include "GenQTest.h"\r
#include "QPeek.h"\r
#include "recmutex.h"\r
#include "TimerDemo.h"\r
#include "PollQ.h"\r
#include "countsem.h"\r
#include "dynamic.h"\r
\r
/* The LED toggled by the check timer callback function.  */\r
#define mainCHECK_LED                           3UL\r
\r
/* The LED turned on by the button interrupt, and turned off by the LED timer. */\r
#define mainTIMER_CONTROLLED_LED        2UL\r
\r
/* The LEDs toggled by the two simple flash LED timers. */\r
#define mainLED0                                        0UL\r
#define mainLED1                                        1UL\r
\r
/* Constant used by the standard timer test functions. */\r
#define mainTIMER_TEST_PERIOD           ( 50 )\r
\r
/* Priorities used by the various different standard demo tasks. */\r
#define mainQUEUE_POLL_PRIORITY         ( tskIDLE_PRIORITY + 1 )\r
#define mainSEM_TEST_PRIORITY           ( tskIDLE_PRIORITY + 1 )\r
#define mainBLOCK_Q_PRIORITY            ( tskIDLE_PRIORITY + 2 )\r
#define mainCREATOR_TASK_PRIORITY   ( tskIDLE_PRIORITY + 3 )\r
#define mainGEN_QUEUE_TASK_PRIORITY     ( tskIDLE_PRIORITY )\r
#define mainuIP_TASK_PRIORITY           ( tskIDLE_PRIORITY + 2 )\r
\r
/* The WEB server uses string handling functions, which in turn use a bit more\r
stack than most of the other tasks. */\r
#define mainuIP_STACK_SIZE                      ( configMINIMAL_STACK_SIZE * 3 )\r
\r
/* The period at which the check timer will expire, in ms, provided no errors\r
have been reported by any of the standard demo tasks.  ms are converted to the\r
equivalent in ticks using the portTICK_PERIOD_MS constant. */\r
#define mainCHECK_TIMER_PERIOD_MS                       ( 3000UL / portTICK_PERIOD_MS )\r
\r
/* The period at which the check timer will expire, in ms, if an error has been\r
reported in one of the standard demo tasks.  ms are converted to the equivalent\r
in ticks using the portTICK_PERIOD_MS constant. */\r
#define mainERROR_CHECK_TIMER_PERIOD_MS         ( 200UL / portTICK_PERIOD_MS )\r
\r
/* The LED that is turned on by pressing SW2 remains on until the button has not\r
been pushed for a full 5000ms. */\r
#define mainBUTTON_LED_TIMER_PERIOD_MS          ( 5000UL / portTICK_PERIOD_MS )\r
\r
/* The period at which the two simple LED flash timers will execute their\r
callback functions. */\r
#define mainLED1_TIMER_PERIOD_MS                        ( 200UL / portTICK_PERIOD_MS )\r
#define mainLED2_TIMER_PERIOD_MS                        ( 600UL / portTICK_PERIOD_MS )\r
\r
/* A block time of zero simply means "don't block". */\r
#define mainDONT_BLOCK                                          ( 0UL )\r
\r
/* The vector used by the GPIO port E.  Button SW2 is configured to generate\r
an interrupt on this port. */\r
#define mainGPIO_E_VECTOR                                       ( 91 )\r
\r
/*-----------------------------------------------------------*/\r
\r
/*\r
 * Setup the NVIC, LED outputs, and button inputs.\r
 */\r
static void prvSetupHardware( void );\r
\r
/*\r
 * Creates the timers that are specific to this demo - namely, the check timer\r
 * the button LED timer, and the two simple LED flash timers.\r
 */\r
static void prvCreateDemoSpecificTimers( void );\r
\r
/*\r
 * The LED/button timer callback function.  This does nothing but switch an LED\r
 * off.\r
 */\r
static void prvButtonLEDTimerCallback( TimerHandle_t xTimer );\r
\r
/*\r
 * The callback function used by both simple LED flash timers.  Both timers use\r
 * the same callback, so the function parameter is used to determine which LED\r
 * should be flashed (effectively to determine which timer has expired).\r
 */\r
static void prvLEDTimerCallback( TimerHandle_t xTimer );\r
\r
/*\r
 * The check timer callback function, as described at the top of this file.\r
 */\r
static void prvCheckTimerCallback( TimerHandle_t xTimer );\r
\r
/*\r
 * Contains the implementation of the web server.\r
 */\r
extern void vuIP_Task( void *pvParameters );\r
\r
/*-----------------------------------------------------------*/\r
\r
/* The LED/Button software timer.  This uses prvButtonLEDTimerCallback() as it's\r
callback function. */\r
static TimerHandle_t xLEDButtonTimer = NULL;\r
\r
/* The check timer.  This uses prvCheckTimerCallback() as its callback\r
function. */\r
static TimerHandle_t xCheckTimer = NULL;\r
\r
/* LED timers - these simply flash LEDs, each using a different frequency.  Both\r
use the same prvLEDTimerCallback() callback function. */\r
static TimerHandle_t xLED1Timer = NULL, xLED2Timer = NULL;\r
\r
/* If an error is detected in a standard demo task, then pcStatusMessage will\r
be set to point to a string that identifies the offending task.  This is just\r
to make debugging easier. */\r
static const char *pcStatusMessage = NULL;\r
\r
/* Used in the run time stats calculations. */\r
static unsigned long ulClocksPer10thOfAMilliSecond = 0UL;\r
\r
/*-----------------------------------------------------------*/\r
\r
void main( void )\r
{\r
        /* Configure the NVIC, LED outputs and button inputs. */\r
        prvSetupHardware();\r
\r
        /* Create the timers that are specific to this demo - other timers are\r
        created as part of the standard demo within vStartTimerDemoTask. */\r
        prvCreateDemoSpecificTimers();\r
\r
        /* Create a lot of 'standard demo' tasks.  Nearly 40 tasks are created in\r
        this demo.  For a much simpler demo, select the 'blinky' build\r
        configuration. */\r
        vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );\r
        vCreateBlockTimeTasks();\r
        vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );\r
        vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );\r
        vStartQueuePeekTasks();\r
        vStartRecursiveMutexTasks();\r
        vStartTimerDemoTask( mainTIMER_TEST_PERIOD );\r
        vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );\r
        vStartCountingSemaphoreTasks();\r
        vStartDynamicPriorityTasks();\r
\r
        /* The web server task. */\r
        xTaskCreate( vuIP_Task, "uIP", mainuIP_STACK_SIZE, NULL, mainuIP_TASK_PRIORITY, NULL );\r
\r
        /* The suicide tasks must be created last, as they need to know how many\r
        tasks were running prior to their creation in order to ascertain whether\r
        or not the correct/expected number of tasks are running at any given\r
        time. */\r
        vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );\r
\r
        /* Start the tasks and timers running. */\r
        vTaskStartScheduler();\r
\r
        /* If all is well, the scheduler will now be running, and the following line\r
        will never be reached.  If the following line does execute, then there was\r
        insufficient FreeRTOS heap memory available for the idle and/or timer tasks\r
        to be created.  See the memory management section on the FreeRTOS web site\r
        for more details. */\r
        for( ;; );\r
}\r
/*-----------------------------------------------------------*/\r
\r
static void prvCheckTimerCallback( TimerHandle_t xTimer )\r
{\r
static long lChangedTimerPeriodAlready = pdFALSE;\r
\r
        /* Check the standard demo tasks are running without error.   Latch the\r
        latest reported error in the pcStatusMessage character pointer.  The latched\r
        string can be viewed using the embedded web server - it is displayed at\r
        the bottom of the served "task stats" page. */\r
        if( xAreGenericQueueTasksStillRunning() != pdTRUE )\r
        {\r
                pcStatusMessage = "Error: GenQueue";\r
        }\r
\r
        if( xAreQueuePeekTasksStillRunning() != pdTRUE )\r
        {\r
                pcStatusMessage = "Error: QueuePeek\n";\r
        }\r
\r
        if( xAreBlockingQueuesStillRunning() != pdTRUE )\r
        {\r
                pcStatusMessage = "Error: BlockQueue\n";\r
        }\r
\r
        if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )\r
        {\r
                pcStatusMessage = "Error: BlockTime\n";\r
        }\r
\r
        if( xAreSemaphoreTasksStillRunning() != pdTRUE )\r
        {\r
                pcStatusMessage = "Error: SemTest\n";\r
        }\r
\r
        if( xIsCreateTaskStillRunning() != pdTRUE )\r
        {\r
                pcStatusMessage = "Error: Death\n";\r
        }\r
\r
        if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )\r
        {\r
                pcStatusMessage = "Error: RecMutex\n";\r
        }\r
\r
        if( xAreTimerDemoTasksStillRunning( ( mainCHECK_TIMER_PERIOD_MS ) ) != pdTRUE )\r
        {\r
                pcStatusMessage = "Error: TimerDemo\n";\r
        }\r
\r
        if( xArePollingQueuesStillRunning() != pdTRUE )\r
        {\r
                pcStatusMessage = "Error: PollQueue\n";\r
        }\r
\r
        if( xAreCountingSemaphoreTasksStillRunning() != pdTRUE )\r
        {\r
                pcStatusMessage = "Error: CountSem\n";\r
        }\r
\r
        if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )\r
        {\r
                pcStatusMessage = "Error: DynamicPriority\n";\r
        }\r
\r
        /* Toggle the check LED to give an indication of the system status.  If\r
        the LED toggles every mainCHECK_TIMER_PERIOD_MS milliseconds then\r
        everything is ok.  A faster toggle indicates an error. */\r
        vParTestToggleLED( mainCHECK_LED );\r
\r
        /* Have any errors been latch in pcStatusMessage?  If so, shorten the\r
        period of the check timer to mainERROR_CHECK_TIMER_PERIOD_MS milliseconds.\r
        This will result in an increase in the rate at which mainCHECK_LED\r
        toggles. */\r
        if( pcStatusMessage != NULL )\r
        {\r
                if( lChangedTimerPeriodAlready == pdFALSE )\r
                {\r
                        lChangedTimerPeriodAlready = pdTRUE;\r
\r
                        /* This call to xTimerChangePeriod() uses a zero block time.\r
                        Functions called from inside of a timer callback function must\r
                        *never* attempt to block. */\r
                        xTimerChangePeriod( xCheckTimer, ( mainERROR_CHECK_TIMER_PERIOD_MS ), mainDONT_BLOCK );\r
                }\r
        }\r
}\r
/*-----------------------------------------------------------*/\r
\r
static void prvButtonLEDTimerCallback( TimerHandle_t xTimer )\r
{\r
        /* The timer has expired - so no button pushes have occurred in the last\r
        five seconds - turn the LED off. */\r
        vParTestSetLED( mainTIMER_CONTROLLED_LED, pdFALSE );\r
}\r
/*-----------------------------------------------------------*/\r
\r
static void prvLEDTimerCallback( TimerHandle_t xTimer )\r
{\r
unsigned long ulLED;\r
\r
        /* This callback is shared by two timers, so the parameter is used to\r
        determine which LED to toggle.  The LED number is stored in the ID of the\r
        timer. */\r
        ulLED = ( unsigned long ) pvTimerGetTimerID( xTimer );\r
        vParTestToggleLED( ulLED );\r
}\r
/*-----------------------------------------------------------*/\r
\r
/* The ISR executed when the user button is pushed. */\r
void vPort_E_ISRHandler( void )\r
{\r
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;\r
\r
        /* The button was pushed, so ensure the LED is on before resetting the\r
        LED timer.  The LED timer will turn the LED off if the button is not\r
        pushed within 5000ms. */\r
        vParTestSetLED( mainTIMER_CONTROLLED_LED, pdTRUE );\r
\r
        /* This interrupt safe FreeRTOS function can be called from this interrupt\r
        because the interrupt priority is equal to or below the\r
        configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY setting in FreeRTOSConfig.h. */\r
        xTimerResetFromISR( xLEDButtonTimer, &xHigherPriorityTaskWoken );\r
\r
        /* Clear the interrupt before leaving.  */\r
        PORTE_ISFR = 0xFFFFFFFFUL;\r
\r
        /* If calling xTimerResetFromISR() caused a task (in this case the timer\r
        service/daemon task) to unblock, and the unblocked task has a priority\r
        higher than or equal to the task that was interrupted, then\r
        xHigherPriorityTaskWoken will now be set to pdTRUE, and calling\r
        portEND_SWITCHING_ISR() will ensure the unblocked task runs next. */\r
        portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );\r
}\r
/*-----------------------------------------------------------*/\r
\r
static void prvSetupHardware( void )\r
{\r
        /* Enable the interrupt on SW1. */\r
        taskDISABLE_INTERRUPTS();\r
        PORTE_PCR26 = PORT_PCR_MUX( 1 ) | PORT_PCR_IRQC( 0xA ) | PORT_PCR_PE_MASK | PORT_PCR_PS_MASK;\r
        enable_irq( mainGPIO_E_VECTOR );\r
\r
        /* The interrupt calls an interrupt safe API function - so its priority must\r
        be equal to or lower than configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY. */\r
        set_irq_priority( mainGPIO_E_VECTOR, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );\r
\r
        /* Configure the LED outputs. */\r
        vParTestInitialise();\r
}\r
/*-----------------------------------------------------------*/\r
\r
static void prvCreateDemoSpecificTimers( void )\r
{\r
        /* This function creates the timers, but does not start them.  This is\r
        because the standard demo timer test is started from main(), after this\r
        function is     called.  The standard demo timer test will deliberately fill the\r
        timer command queue - and will fail the test if the command queue already\r
        holds start commands for the timers created here.  Instead, the timers\r
        created in this function are started from the idle task, at which time, the\r
        timer service/daemon task will be running, and will have drained the timer\r
        command queue. */\r
\r
        /* Create the software timer that is responsible for turning off the LED\r
        if the button is not pushed within 5000ms, as described at the top of\r
        this file. */\r
        xLEDButtonTimer = xTimerCreate( "ButtonLEDTimer",                                       /* A text name, purely to help debugging. */\r
                                                                        ( mainBUTTON_LED_TIMER_PERIOD_MS ),     /* The timer period, in this case 5000ms (5s). */\r
                                                                        pdFALSE,                                                        /* This is a one shot timer, so xAutoReload is set to pdFALSE. */\r
                                                                        ( void * ) 0,                                           /* The ID is not used, so can be set to anything. */\r
                                                                        prvButtonLEDTimerCallback                       /* The callback function that switches the LED off. */\r
                                                        );\r
\r
        /* Create the software timer that performs the 'check' functionality,\r
        as described at the top of this file. */\r
        xCheckTimer = xTimerCreate( "CheckTimer",                                               /* A text name, purely to help debugging. */\r
                                                                ( mainCHECK_TIMER_PERIOD_MS ),          /* The timer period, in this case 3000ms (3s). */\r
                                                                pdTRUE,                                                         /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */\r
                                                                ( void * ) 0,                                           /* The ID is not used, so can be set to anything. */\r
                                                                prvCheckTimerCallback                           /* The callback function that inspects the status of all the other tasks. */\r
                                                          );\r
\r
        /* Create the software timers used to simply flash LEDs.  These two timers\r
        share a callback function, so the callback parameter is used to pass in the\r
        LED that should be toggled. */\r
        xLED1Timer = xTimerCreate( "LED1Timer",                                         /* A text name, purely to help debugging. */\r
                                                                ( mainLED1_TIMER_PERIOD_MS ),   /* The timer period, in this case 3000ms (3s). */\r
                                                                pdTRUE,                                                 /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */\r
                                                                ( void * ) mainLED0,                    /* The ID is used to pass in the number of the LED to be toggled. */\r
                                                                prvLEDTimerCallback                             /* The callback function simply toggles the LED specified by its parameter. */\r
                                                          );\r
\r
        xLED2Timer = xTimerCreate( "LED2Timer",                                         /* A text name, purely to help debugging. */\r
                                                                ( mainLED2_TIMER_PERIOD_MS ),   /* The timer period, in this case 3000ms (3s). */\r
                                                                pdTRUE,                                                 /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */\r
                                                                ( void * ) mainLED1,                    /* The ID is used to pass in the number of the LED to be toggled. */\r
                                                                prvLEDTimerCallback                             /* The callback function simply toggles the LED specified by its parameter. */\r
                                                          );\r
}\r
/*-----------------------------------------------------------*/\r
\r
void vApplicationMallocFailedHook( void )\r
{\r
        /* Called if a call to pvPortMalloc() fails because there is insufficient\r
        free memory available in the FreeRTOS heap.  pvPortMalloc() is called\r
        internally by FreeRTOS API functions that create tasks, queues, software\r
        timers, and semaphores.  The size of the FreeRTOS heap is set by the\r
        configTOTAL_HEAP_SIZE configuration constant in FreeRTOSConfig.h. */\r
        taskDISABLE_INTERRUPTS();\r
        for( ;; );\r
}\r
/*-----------------------------------------------------------*/\r
\r
void vApplicationStackOverflowHook( TaskHandle_t pxTask, char *pcTaskName )\r
{\r
        ( void ) pcTaskName;\r
        ( void ) pxTask;\r
\r
        /* Run time stack overflow checking is performed if\r
        configCHECK_FOR_STACK_OVERFLOW is defined to 1 or 2.  This hook\r
        function is called if a stack overflow is detected. */\r
        taskDISABLE_INTERRUPTS();\r
        for( ;; );\r
}\r
/*-----------------------------------------------------------*/\r
\r
void vApplicationIdleHook( void )\r
{\r
static long lPrintedOut = pdFALSE;\r
volatile size_t xFreeHeapSpace;\r
\r
        if( lPrintedOut == pdFALSE )\r
        {\r
                lPrintedOut = pdTRUE;\r
\r
                /* The timer command queue will have been filled when the timer test\r
                tasks were created in main() (this is part of the test they perform).\r
                Therefore, while the check and LED timers can be created in main(), they\r
                cannot be started from main().  Once the scheduler has started, the timer\r
                service task will drain the command queue, and now the check and LED\r
                timers can be started successfully.  Normally the idle task must not\r
                call a function that could cause it to block in case there are no tasks\r
                that are able to run.  In this case, however, it is ok as posting to the\r
                timer command queue guarantees that at least the timer service/daemon\r
                task will be able to execute. */\r
                xTimerStart( xCheckTimer, portMAX_DELAY );\r
                xTimerStart( xLED1Timer, portMAX_DELAY );\r
                xTimerStart( xLED2Timer, portMAX_DELAY );\r
\r
                xFreeHeapSpace = xPortGetFreeHeapSize();\r
\r
                if( xFreeHeapSpace > 100 )\r
                {\r
                        /* By now, the kernel has allocated everything it is going to, so\r
                        if there is a lot of heap remaining unallocated then\r
                        the value of configTOTAL_HEAP_SIZE in FreeRTOSConfig.h can be\r
                        reduced accordingly. */\r
                }\r
        }\r
}\r
/*-----------------------------------------------------------*/\r
\r
void vApplicationTickHook( void )\r
{\r
        /* Call the periodic timer test, which tests the timer API functions that\r
        can be called from an ISR. */\r
        vTimerPeriodicISRTests();\r
}\r
/*-----------------------------------------------------------*/\r
\r
char *pcGetTaskStatusMessage( void )\r
{\r
        /* A simple GET function used by a CGI script so it can display the\r
        execution status at the bottom of the task stats web page served by the\r
        embedded web server. */\r
        if( pcStatusMessage == NULL )\r
        {\r
                return "All tasks running without error";\r
        }\r
        else\r
        {\r
                return ( char * ) pcStatusMessage;\r
        }\r
}\r
/*-----------------------------------------------------------*/\r
\r
void vMainConfigureTimerForRunTimeStats( void )\r
{\r
        /* How many clocks are there per tenth of a millisecond? */\r
        ulClocksPer10thOfAMilliSecond = configCPU_CLOCK_HZ / 10000UL;\r
}\r
/*-----------------------------------------------------------*/\r
\r
unsigned long ulMainGetRunTimeCounterValue( void )\r
{\r
unsigned long ulSysTickCounts, ulTickCount, ulReturn;\r
const unsigned long ulSysTickReloadValue = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;\r
volatile unsigned long * const pulCurrentSysTickCount = ( ( volatile unsigned long *) 0xe000e018 );\r
volatile unsigned long * const pulInterruptCTRLState = ( ( volatile unsigned long *) 0xe000ed04 );\r
const unsigned long ulSysTickPendingBit = 0x04000000UL;\r
\r
        /* NOTE: There are potentially race conditions here.  However, it is used\r
        anyway to keep the examples simple, and to avoid reliance on a separate\r
        timer peripheral. */\r
\r
\r
        /* The SysTick is a down counter.  How many clocks have passed since it was\r
        last reloaded? */\r
        ulSysTickCounts = ulSysTickReloadValue - *pulCurrentSysTickCount;\r
\r
        /* How many times has it overflowed? */\r
        ulTickCount = xTaskGetTickCountFromISR();\r
\r
        /* This is called from the context switch, so will be called from a\r
        critical section.  xTaskGetTickCountFromISR() contains its own critical\r
        section, and the ISR safe critical sections are not designed to nest,\r
        so reset the critical section. */\r
        portSET_INTERRUPT_MASK_FROM_ISR();\r
\r
        /* Is there a SysTick interrupt pending? */\r
        if( ( *pulInterruptCTRLState & ulSysTickPendingBit ) != 0UL )\r
        {\r
                /* There is a SysTick interrupt pending, so the SysTick has overflowed\r
                but the tick count not yet incremented. */\r
                ulTickCount++;\r
\r
                /* Read the SysTick again, as the overflow might have occurred since\r
                it was read last. */\r
                ulSysTickCounts = ulSysTickReloadValue - *pulCurrentSysTickCount;\r
        }\r
\r
        /* Convert the tick count into tenths of a millisecond.  THIS ASSUMES\r
        configTICK_RATE_HZ is 1000! */\r
        ulReturn = ( ulTickCount * 10UL ) ;\r
\r
        /* Add on the number of tenths of a millisecond that have passed since the\r
        tick count last got updated. */\r
        ulReturn += ( ulSysTickCounts / ulClocksPer10thOfAMilliSecond );\r
\r
        return ulReturn;\r
}\r
/*-----------------------------------------------------------*/\r
\r