1 /*----------------------------------------------------------------------------
\r
2 * LPC2378 Ethernet Definitions
\r
3 *----------------------------------------------------------------------------
\r
5 * Purpose: Philips LPC2378 EMAC hardware definitions
\r
6 *----------------------------------------------------------------------------
\r
7 * Copyright (c) 2006 KEIL - An ARM Company. All rights reserved.
\r
8 *---------------------------------------------------------------------------*/
\r
12 /* MAC address definition. The MAC address must be unique on the network. */
\r
13 #define emacETHADDR0 0
\r
14 #define emacETHADDR1 0xbd
\r
15 #define emacETHADDR2 0x33
\r
16 #define emacETHADDR3 0x02
\r
17 #define emacETHADDR4 0x64
\r
18 #define emacETHADDR5 0x24
\r
21 /* EMAC Memory Buffer configuration for 16K Ethernet RAM. */
\r
22 #define NUM_RX_FRAG 4 /* Num.of RX Fragments 4*1536= 6.0kB */
\r
23 #define NUM_TX_FRAG 2 /* Num.of TX Fragments 2*1536= 3.0kB */
\r
24 #define ETH_FRAG_SIZE 1536 /* Packet Fragment size 1536 Bytes */
\r
26 #define ETH_MAX_FLEN 1536 /* Max. Ethernet Frame Size */
\r
28 /* EMAC variables located in 16K Ethernet SRAM */
\r
29 #define RX_DESC_BASE 0x7FE00000
\r
30 #define RX_STAT_BASE (RX_DESC_BASE + NUM_RX_FRAG*8)
\r
31 #define TX_DESC_BASE (RX_STAT_BASE + NUM_RX_FRAG*8)
\r
32 #define TX_STAT_BASE (TX_DESC_BASE + NUM_TX_FRAG*8)
\r
33 #define RX_BUF_BASE (TX_STAT_BASE + NUM_TX_FRAG*4)
\r
34 #define TX_BUF_BASE (RX_BUF_BASE + NUM_RX_FRAG*ETH_FRAG_SIZE)
\r
36 /* RX and TX descriptor and status definitions. */
\r
37 #define RX_DESC_PACKET(i) (*(unsigned int *)(RX_DESC_BASE + 8*i))
\r
38 #define RX_DESC_CTRL(i) (*(unsigned int *)(RX_DESC_BASE+4 + 8*i))
\r
39 #define RX_STAT_INFO(i) (*(unsigned int *)(RX_STAT_BASE + 8*i))
\r
40 #define RX_STAT_HASHCRC(i) (*(unsigned int *)(RX_STAT_BASE+4 + 8*i))
\r
41 #define TX_DESC_PACKET(i) (*(unsigned int *)(TX_DESC_BASE + 8*i))
\r
42 #define TX_DESC_CTRL(i) (*(unsigned int *)(TX_DESC_BASE+4 + 8*i))
\r
43 #define TX_STAT_INFO(i) (*(unsigned int *)(TX_STAT_BASE + 4*i))
\r
44 #define RX_BUF(i) (RX_BUF_BASE + ETH_FRAG_SIZE*i)
\r
45 #define TX_BUF(i) (TX_BUF_BASE + ETH_FRAG_SIZE*i)
\r
47 /* MAC Configuration Register 1 */
\r
48 #define MAC1_REC_EN 0x00000001 /* Receive Enable */
\r
49 #define MAC1_PASS_ALL 0x00000002 /* Pass All Receive Frames */
\r
50 #define MAC1_RX_FLOWC 0x00000004 /* RX Flow Control */
\r
51 #define MAC1_TX_FLOWC 0x00000008 /* TX Flow Control */
\r
52 #define MAC1_LOOPB 0x00000010 /* Loop Back Mode */
\r
53 #define MAC1_RES_TX 0x00000100 /* Reset TX Logic */
\r
54 #define MAC1_RES_MCS_TX 0x00000200 /* Reset MAC TX Control Sublayer */
\r
55 #define MAC1_RES_RX 0x00000400 /* Reset RX Logic */
\r
56 #define MAC1_RES_MCS_RX 0x00000800 /* Reset MAC RX Control Sublayer */
\r
57 #define MAC1_SIM_RES 0x00004000 /* Simulation Reset */
\r
58 #define MAC1_SOFT_RES 0x00008000 /* Soft Reset MAC */
\r
60 /* MAC Configuration Register 2 */
\r
61 #define MAC2_FULL_DUP 0x00000001 /* Full Duplex Mode */
\r
62 #define MAC2_FRM_LEN_CHK 0x00000002 /* Frame Length Checking */
\r
63 #define MAC2_HUGE_FRM_EN 0x00000004 /* Huge Frame Enable */
\r
64 #define MAC2_DLY_CRC 0x00000008 /* Delayed CRC Mode */
\r
65 #define MAC2_CRC_EN 0x00000010 /* Append CRC to every Frame */
\r
66 #define MAC2_PAD_EN 0x00000020 /* Pad all Short Frames */
\r
67 #define MAC2_VLAN_PAD_EN 0x00000040 /* VLAN Pad Enable */
\r
68 #define MAC2_ADET_PAD_EN 0x00000080 /* Auto Detect Pad Enable */
\r
69 #define MAC2_PPREAM_ENF 0x00000100 /* Pure Preamble Enforcement */
\r
70 #define MAC2_LPREAM_ENF 0x00000200 /* Long Preamble Enforcement */
\r
71 #undef MAC2_NO_BACKOFF /* Remove compiler warning. */
\r
72 #define MAC2_NO_BACKOFF 0x00001000 /* No Backoff Algorithm */
\r
73 #define MAC2_BACK_PRESSURE 0x00002000 /* Backoff Presurre / No Backoff */
\r
74 #define MAC2_EXCESS_DEF 0x00004000 /* Excess Defer */
\r
76 /* Back-to-Back Inter-Packet-Gap Register */
\r
77 #define IPGT_FULL_DUP 0x00000015 /* Recommended value for Full Duplex */
\r
78 #define IPGT_HALF_DUP 0x00000012 /* Recommended value for Half Duplex */
\r
80 /* Non Back-to-Back Inter-Packet-Gap Register */
\r
81 #define IPGR_DEF 0x00000012 /* Recommended value */
\r
83 /* Collision Window/Retry Register */
\r
84 #define CLRT_DEF 0x0000370F /* Default value */
\r
86 /* PHY Support Register */
\r
87 #undef SUPP_SPEED /* Remove compiler warning. */
\r
88 #define SUPP_SPEED 0x00000100 /* Reduced MII Logic Current Speed */
\r
89 #define SUPP_RES_RMII 0x00000800 /* Reset Reduced MII Logic */
\r
92 #define TEST_SHCUT_PQUANTA 0x00000001 /* Shortcut Pause Quanta */
\r
93 #define TEST_TST_PAUSE 0x00000002 /* Test Pause */
\r
94 #define TEST_TST_BACKP 0x00000004 /* Test Back Pressure */
\r
96 /* MII Management Configuration Register */
\r
97 #define MCFG_SCAN_INC 0x00000001 /* Scan Increment PHY Address */
\r
98 #define MCFG_SUPP_PREAM 0x00000002 /* Suppress Preamble */
\r
99 #define MCFG_CLK_SEL 0x0000001C /* Clock Select Mask */
\r
100 #define MCFG_RES_MII 0x00008000 /* Reset MII Management Hardware */
\r
102 /* MII Management Command Register */
\r
103 #undef MCMD_READ /* Remove compiler warning. */
\r
104 #define MCMD_READ 0x00000001 /* MII Read */
\r
105 #undef MCMD_SCAN /* Remove compiler warning. */
\r
106 #define MCMD_SCAN 0x00000002 /* MII Scan continuously */
\r
108 #define MII_WR_TOUT 0x00050000 /* MII Write timeout count */
\r
109 #define MII_RD_TOUT 0x00050000 /* MII Read timeout count */
\r
111 /* MII Management Address Register */
\r
112 #define MADR_REG_ADR 0x0000001F /* MII Register Address Mask */
\r
113 #define MADR_PHY_ADR 0x00001F00 /* PHY Address Mask */
\r
115 /* MII Management Indicators Register */
\r
116 #undef MIND_BUSY /* Remove compiler warning. */
\r
117 #define MIND_BUSY 0x00000001 /* MII is Busy */
\r
118 #define MIND_SCAN 0x00000002 /* MII Scanning in Progress */
\r
119 #define MIND_NOT_VAL 0x00000004 /* MII Read Data not valid */
\r
120 #define MIND_MII_LINK_FAIL 0x00000008 /* MII Link Failed */
\r
122 /* Command Register */
\r
123 #define CR_RX_EN 0x00000001 /* Enable Receive */
\r
124 #define CR_TX_EN 0x00000002 /* Enable Transmit */
\r
125 #define CR_REG_RES 0x00000008 /* Reset Host Registers */
\r
126 #define CR_TX_RES 0x00000010 /* Reset Transmit Datapath */
\r
127 #define CR_RX_RES 0x00000020 /* Reset Receive Datapath */
\r
128 #define CR_PASS_RUNT_FRM 0x00000040 /* Pass Runt Frames */
\r
129 #define CR_PASS_RX_FILT 0x00000080 /* Pass RX Filter */
\r
130 #define CR_TX_FLOW_CTRL 0x00000100 /* TX Flow Control */
\r
131 #define CR_RMII 0x00000200 /* Reduced MII Interface */
\r
132 #define CR_FULL_DUP 0x00000400 /* Full Duplex */
\r
134 /* Status Register */
\r
135 #define SR_RX_EN 0x00000001 /* Enable Receive */
\r
136 #define SR_TX_EN 0x00000002 /* Enable Transmit */
\r
138 /* Transmit Status Vector 0 Register */
\r
139 #define TSV0_CRC_ERR 0x00000001 /* CRC error */
\r
140 #define TSV0_LEN_CHKERR 0x00000002 /* Length Check Error */
\r
141 #define TSV0_LEN_OUTRNG 0x00000004 /* Length Out of Range */
\r
142 #define TSV0_DONE 0x00000008 /* Tramsmission Completed */
\r
143 #define TSV0_MCAST 0x00000010 /* Multicast Destination */
\r
144 #define TSV0_BCAST 0x00000020 /* Broadcast Destination */
\r
145 #define TSV0_PKT_DEFER 0x00000040 /* Packet Deferred */
\r
146 #define TSV0_EXC_DEFER 0x00000080 /* Excessive Packet Deferral */
\r
147 #define TSV0_EXC_COLL 0x00000100 /* Excessive Collision */
\r
148 #define TSV0_LATE_COLL 0x00000200 /* Late Collision Occured */
\r
149 #define TSV0_GIANT 0x00000400 /* Giant Frame */
\r
150 #define TSV0_UNDERRUN 0x00000800 /* Buffer Underrun */
\r
151 #define TSV0_BYTES 0x0FFFF000 /* Total Bytes Transferred */
\r
152 #define TSV0_CTRL_FRAME 0x10000000 /* Control Frame */
\r
153 #define TSV0_PAUSE 0x20000000 /* Pause Frame */
\r
154 #define TSV0_BACK_PRESS 0x40000000 /* Backpressure Method Applied */
\r
155 #define TSV0_VLAN 0x80000000 /* VLAN Frame */
\r
157 /* Transmit Status Vector 1 Register */
\r
158 #define TSV1_BYTE_CNT 0x0000FFFF /* Transmit Byte Count */
\r
159 #define TSV1_COLL_CNT 0x000F0000 /* Transmit Collision Count */
\r
161 /* Receive Status Vector Register */
\r
162 #define RSV_BYTE_CNT 0x0000FFFF /* Receive Byte Count */
\r
163 #define RSV_PKT_IGNORED 0x00010000 /* Packet Previously Ignored */
\r
164 #define RSV_RXDV_SEEN 0x00020000 /* RXDV Event Previously Seen */
\r
165 #define RSV_CARR_SEEN 0x00040000 /* Carrier Event Previously Seen */
\r
166 #define RSV_REC_CODEV 0x00080000 /* Receive Code Violation */
\r
167 #define RSV_CRC_ERR 0x00100000 /* CRC Error */
\r
168 #define RSV_LEN_CHKERR 0x00200000 /* Length Check Error */
\r
169 #define RSV_LEN_OUTRNG 0x00400000 /* Length Out of Range */
\r
170 #define RSV_REC_OK 0x00800000 /* Frame Received OK */
\r
171 #define RSV_MCAST 0x01000000 /* Multicast Frame */
\r
172 #define RSV_BCAST 0x02000000 /* Broadcast Frame */
\r
173 #define RSV_DRIB_NIBB 0x04000000 /* Dribble Nibble */
\r
174 #define RSV_CTRL_FRAME 0x08000000 /* Control Frame */
\r
175 #define RSV_PAUSE 0x10000000 /* Pause Frame */
\r
176 #define RSV_UNSUPP_OPC 0x20000000 /* Unsupported Opcode */
\r
177 #define RSV_VLAN 0x40000000 /* VLAN Frame */
\r
179 /* Flow Control Counter Register */
\r
180 #define FCC_MIRR_CNT 0x0000FFFF /* Mirror Counter */
\r
181 #define FCC_PAUSE_TIM 0xFFFF0000 /* Pause Timer */
\r
183 /* Flow Control Status Register */
\r
184 #define FCS_MIRR_CNT 0x0000FFFF /* Mirror Counter Current */
\r
186 /* Receive Filter Control Register */
\r
187 #define RFC_UCAST_EN 0x00000001 /* Accept Unicast Frames Enable */
\r
188 #define RFC_BCAST_EN 0x00000002 /* Accept Broadcast Frames Enable */
\r
189 #define RFC_MCAST_EN 0x00000004 /* Accept Multicast Frames Enable */
\r
190 #define RFC_UCAST_HASH_EN 0x00000008 /* Accept Unicast Hash Filter Frames */
\r
191 #define RFC_MCAST_HASH_EN 0x00000010 /* Accept Multicast Hash Filter Fram.*/
\r
192 #define RFC_PERFECT_EN 0x00000020 /* Accept Perfect Match Enable */
\r
193 #define RFC_MAGP_WOL_EN 0x00001000 /* Magic Packet Filter WoL Enable */
\r
194 #define RFC_PFILT_WOL_EN 0x00002000 /* Perfect Filter WoL Enable */
\r
196 /* Receive Filter WoL Status/Clear Registers */
\r
197 #define WOL_UCAST 0x00000001 /* Unicast Frame caused WoL */
\r
198 #define WOL_BCAST 0x00000002 /* Broadcast Frame caused WoL */
\r
199 #define WOL_MCAST 0x00000004 /* Multicast Frame caused WoL */
\r
200 #define WOL_UCAST_HASH 0x00000008 /* Unicast Hash Filter Frame WoL */
\r
201 #define WOL_MCAST_HASH 0x00000010 /* Multicast Hash Filter Frame WoL */
\r
202 #define WOL_PERFECT 0x00000020 /* Perfect Filter WoL */
\r
203 #define WOL_RX_FILTER 0x00000080 /* RX Filter caused WoL */
\r
204 #define WOL_MAG_PACKET 0x00000100 /* Magic Packet Filter caused WoL */
\r
206 /* Interrupt Status/Enable/Clear/Set Registers */
\r
207 #define INT_RX_OVERRUN 0x00000001 /* Overrun Error in RX Queue */
\r
208 #define INT_RX_ERR 0x00000002 /* Receive Error */
\r
209 #define INT_RX_FIN 0x00000004 /* RX Finished Process Descriptors */
\r
210 #define INT_RX_DONE 0x00000008 /* Receive Done */
\r
211 #define INT_TX_UNDERRUN 0x00000010 /* Transmit Underrun */
\r
212 #define INT_TX_ERR 0x00000020 /* Transmit Error */
\r
213 #define INT_TX_FIN 0x00000040 /* TX Finished Process Descriptors */
\r
214 #define INT_TX_DONE 0x00000080 /* Transmit Done */
\r
215 #define INT_SOFT_INT 0x00001000 /* Software Triggered Interrupt */
\r
216 #define INT_WAKEUP 0x00002000 /* Wakeup Event Interrupt */
\r
218 /* Power Down Register */
\r
219 #define PD_POWER_DOWN 0x80000000 /* Power Down MAC */
\r
221 /* RX Descriptor Control Word */
\r
222 #define RCTRL_SIZE 0x000007FF /* Buffer size mask */
\r
223 #define RCTRL_INT 0x80000000 /* Generate RxDone Interrupt */
\r
225 /* RX Status Hash CRC Word */
\r
226 #define RHASH_SA 0x000001FF /* Hash CRC for Source Address */
\r
227 #define RHASH_DA 0x001FF000 /* Hash CRC for Destination Address */
\r
229 /* RX Status Information Word */
\r
230 #define RINFO_SIZE 0x000007FF /* Data size in bytes */
\r
231 #define RINFO_CTRL_FRAME 0x00040000 /* Control Frame */
\r
232 #define RINFO_VLAN 0x00080000 /* VLAN Frame */
\r
233 #define RINFO_FAIL_FILT 0x00100000 /* RX Filter Failed */
\r
234 #define RINFO_MCAST 0x00200000 /* Multicast Frame */
\r
235 #define RINFO_BCAST 0x00400000 /* Broadcast Frame */
\r
236 #define RINFO_CRC_ERR 0x00800000 /* CRC Error in Frame */
\r
237 #define RINFO_SYM_ERR 0x01000000 /* Symbol Error from PHY */
\r
238 #define RINFO_LEN_ERR 0x02000000 /* Length Error */
\r
239 #define RINFO_RANGE_ERR 0x04000000 /* Range Error (exceeded max. size) */
\r
240 #define RINFO_ALIGN_ERR 0x08000000 /* Alignment Error */
\r
241 #define RINFO_OVERRUN 0x10000000 /* Receive overrun */
\r
242 #define RINFO_NO_DESCR 0x20000000 /* No new Descriptor available */
\r
243 #define RINFO_LAST_FLAG 0x40000000 /* Last Fragment in Frame */
\r
244 #define RINFO_ERR 0x80000000 /* Error Occured (OR of all errors) */
\r
246 #define RINFO_ERR_MASK (RINFO_FAIL_FILT | RINFO_CRC_ERR | RINFO_SYM_ERR | \
\r
247 RINFO_LEN_ERR | RINFO_ALIGN_ERR | RINFO_OVERRUN)
\r
249 /* TX Descriptor Control Word */
\r
250 #define TCTRL_SIZE 0x000007FF /* Size of data buffer in bytes */
\r
251 #define TCTRL_OVERRIDE 0x04000000 /* Override Default MAC Registers */
\r
252 #define TCTRL_HUGE 0x08000000 /* Enable Huge Frame */
\r
253 #define TCTRL_PAD 0x10000000 /* Pad short Frames to 64 bytes */
\r
254 #define TCTRL_CRC 0x20000000 /* Append a hardware CRC to Frame */
\r
255 #define TCTRL_LAST 0x40000000 /* Last Descriptor for TX Frame */
\r
256 #define TCTRL_INT 0x80000000 /* Generate TxDone Interrupt */
\r
258 /* TX Status Information Word */
\r
259 #define TINFO_COL_CNT 0x01E00000 /* Collision Count */
\r
260 #define TINFO_DEFER 0x02000000 /* Packet Deferred (not an error) */
\r
261 #define TINFO_EXCESS_DEF 0x04000000 /* Excessive Deferral */
\r
262 #define TINFO_EXCESS_COL 0x08000000 /* Excessive Collision */
\r
263 #define TINFO_LATE_COL 0x10000000 /* Late Collision Occured */
\r
264 #define TINFO_UNDERRUN 0x20000000 /* Transmit Underrun */
\r
265 #define TINFO_NO_DESCR 0x40000000 /* No new Descriptor available */
\r
266 #define TINFO_ERR 0x80000000 /* Error Occured (OR of all errors) */
\r
268 /* DP83848C PHY Registers */
\r
269 #define PHY_REG_BMCR 0x00 /* Basic Mode Control Register */
\r
270 #define PHY_REG_BMSR 0x01 /* Basic Mode Status Register */
\r
271 #define PHY_REG_IDR1 0x02 /* PHY Identifier 1 */
\r
272 #define PHY_REG_IDR2 0x03 /* PHY Identifier 2 */
\r
273 #define PHY_REG_ANAR 0x04 /* Auto-Negotiation Advertisement */
\r
274 #define PHY_REG_ANLPAR 0x05 /* Auto-Neg. Link Partner Abitily */
\r
275 #define PHY_REG_ANER 0x06 /* Auto-Neg. Expansion Register */
\r
276 #define PHY_REG_ANNPTR 0x07 /* Auto-Neg. Next Page TX */
\r
278 /* PHY Extended Registers */
\r
279 #define PHY_REG_STS 0x10 /* Status Register */
\r
280 #define PHY_REG_MICR 0x11 /* MII Interrupt Control Register */
\r
281 #define PHY_REG_MISR 0x12 /* MII Interrupt Status Register */
\r
282 #define PHY_REG_FCSCR 0x14 /* False Carrier Sense Counter */
\r
283 #define PHY_REG_RECR 0x15 /* Receive Error Counter */
\r
284 #define PHY_REG_PCSR 0x16 /* PCS Sublayer Config. and Status */
\r
285 #define PHY_REG_RBR 0x17 /* RMII and Bypass Register */
\r
286 #define PHY_REG_LEDCR 0x18 /* LED Direct Control Register */
\r
287 #define PHY_REG_PHYCR 0x19 /* PHY Control Register */
\r
288 #define PHY_REG_10BTSCR 0x1A /* 10Base-T Status/Control Register */
\r
289 #define PHY_REG_CDCTRL1 0x1B /* CD Test Control and BIST Extens. */
\r
290 #define PHY_REG_EDCR 0x1D /* Energy Detect Control Register */
\r
292 #define PHY_FULLD_100M 0x2100 /* Full Duplex 100Mbit */
\r
293 #define PHY_HALFD_100M 0x2000 /* Half Duplex 100Mbit */
\r
294 #define PHY_FULLD_10M 0x0100 /* Full Duplex 10Mbit */
\r
295 #define PHY_HALFD_10M 0x0000 /* Half Duplex 10MBit */
\r
296 #define PHY_AUTO_NEG 0x3000 /* Select Auto Negotiation */
\r
298 #define DP83848C_DEF_ADR 0x0100 /* Default PHY device address */
\r
299 #define DP83848C_ID 0x20005C90 /* PHY Identifier */
\r
302 portBASE_TYPE vInitEMAC(void);
\r
303 unsigned short ReadFrameBE_EMAC(void);
\r
304 void vIncrementTxLength(unsigned long ulLength);
\r
305 void CopyFromFrame_EMAC(void *Dest, unsigned short Size);
\r
306 void DummyReadFrame_EMAC(unsigned short Size);
\r
307 unsigned short StartReadFrame(void);
\r
308 void EndReadFrame(void);
\r
309 unsigned int CheckFrameReceived(void);
\r
310 void vInitialiseSend(void);
\r
311 unsigned int Rdy4Tx(void);
\r
312 void vSendBufferToMAC(void);
\r
313 void vEMACWaitForInput( void );
\r
314 unsigned int uiGetEMACRxData( unsigned char *ucBuffer );
\r
319 /*----------------------------------------------------------------------------
\r
321 *---------------------------------------------------------------------------*/
\r
projects / freertos / blob