1 /* ----------------------------------------------------------------------------
\r
2 * SAM Software Package License
\r
3 * ----------------------------------------------------------------------------
\r
4 * Copyright (c) 2011, Atmel Corporation
\r
6 * All rights reserved.
\r
8 * Redistribution and use in source and binary forms, with or without
\r
9 * modification, are permitted provided that the following conditions are met:
\r
11 * - Redistributions of source code must retain the above copyright notice,
\r
12 * this list of conditions and the disclaimer below.
\r
14 * Atmel's name may not be used to endorse or promote products derived from
\r
15 * this software without specific prior written permission.
\r
17 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
\r
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
\r
19 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
\r
20 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
\r
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
\r
22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
\r
23 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
\r
24 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
\r
25 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
\r
26 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
\r
27 * ----------------------------------------------------------------------------
\r
35 * Interface for configuration the Pulse Width Modulation Controller (PWM) peripheral.
\r
39 * -# Configures PWM clocks A & B to run at the given frequencies using
\r
40 * \ref PWMC_ConfigureClocks().
\r
41 * -# Configure PWMC channel using \ref PWMC_ConfigureChannel(), \ref PWMC_ConfigureChannelExt()
\r
42 * \ref PWMC_SetPeriod(), \ref PWMC_SetDutyCycle() and \ref PWMC_SetDeadTime().
\r
43 * -# Enable & disable channel using \ref PWMC_EnableChannel() and
\r
44 * \ref PWMC_DisableChannel().
\r
45 * -# Enable & disable the period interrupt for the given PWM channel using
\r
46 * \ref PWMC_EnableChannelIt() and \ref PWMC_DisableChannelIt().
\r
47 * -# Enable & disable the selected interrupts sources on a PWMC peripheral
\r
48 * using \ref PWMC_EnableIt() and \ref PWMC_DisableIt().
\r
49 * -# Control syncronous channel using \ref PWMC_ConfigureSyncChannel(),
\r
50 * \ref PWMC_SetSyncChannelUpdatePeriod() and \ref PWMC_SetSyncChannelUpdateUnlock().
\r
51 * -# Control PWM override output using \ref PWMC_SetOverrideValue(),
\r
52 * \ref PWMC_EnableOverrideOutput() and \ref PWMC_DisableOverrideOutput().
\r
53 * -# Send data through the transmitter using \ref PWMC_WriteBuffer().
\r
60 /*----------------------------------------------------------------------------
\r
62 *----------------------------------------------------------------------------*/
\r
72 /*----------------------------------------------------------------------------
\r
73 * Exported functions
\r
74 *----------------------------------------------------------------------------*/
\r
76 extern void PWMC_ConfigureChannel(
\r
82 extern void PWMC_ConfigureChannelExt(
\r
88 uint32_t countEventSelect,
\r
90 uint32_t DTHInverte,
\r
91 uint32_t DTLInverte);
\r
92 extern void PWMC_ConfigureClocks(Pwm* pPwm, uint32_t clka, uint32_t clkb, uint32_t mck);
\r
93 extern void PWMC_SetPeriod( Pwm* pPwm, uint8_t channel, uint16_t period);
\r
94 extern void PWMC_SetDutyCycle( Pwm* pPwm, uint8_t channel, uint16_t duty);
\r
95 extern void PWMC_SetDeadTime( Pwm* pPwm, uint8_t channel, uint16_t timeH, uint16_t timeL);
\r
96 extern void PWMC_ConfigureSyncChannel( Pwm* pPwm,
\r
98 uint32_t updateMode,
\r
99 uint32_t requestMode,
\r
100 uint32_t requestComparisonSelect);
\r
101 extern void PWMC_SetSyncChannelUpdatePeriod( Pwm* pPwm, uint8_t period);
\r
102 extern void PWMC_SetSyncChannelUpdateUnlock( Pwm* pPwm );
\r
103 extern void PWMC_EnableChannel( Pwm* pPwm, uint8_t channel);
\r
104 extern void PWMC_DisableChannel( Pwm* pPwm, uint8_t channel);
\r
105 extern void PWMC_EnableChannelIt( Pwm* pPwm, uint8_t channel);
\r
106 extern void PWMC_DisableChannelIt( Pwm* pPwm, uint8_t channel);
\r
107 extern void PWMC_EnableIt( Pwm* pPwm, uint32_t sources1, uint32_t sources2);
\r
108 extern void PWMC_DisableIt( Pwm* pPwm, uint32_t sources1, uint32_t sources2);
\r
109 extern uint8_t PWMC_WriteBuffer(Pwm *pwmc,
\r
112 extern void PWMC_SetOverrideValue( Pwm* pPwm, uint32_t value);
\r
113 extern void PWMC_EnableOverrideOutput( Pwm* pPwm, uint32_t value, uint32_t sync);
\r
114 extern void PWMC_OutputOverrideSelection( Pwm* pPwm, uint32_t value );
\r
115 extern void PWMC_DisableOverrideOutput( Pwm* pPwm, uint32_t value, uint32_t sync);
\r
116 extern void PWMC_SetFaultMode( Pwm* pPwm, uint32_t mode);
\r
117 extern void PWMC_FaultClear( Pwm* pPwm, uint32_t fault);
\r
118 extern void PWMC_SetFaultProtectionValue( Pwm* pPwm, uint32_t value);
\r
119 extern void PWMC_EnableFaultProtection( Pwm* pPwm, uint32_t value);
\r
120 extern void PWMC_ConfigureComparisonUnit( Pwm* pPwm, uint32_t x, uint32_t value, uint32_t mode);
\r
121 extern void PWMC_ConfigureEventLineMode( Pwm* pPwm, uint32_t x, uint32_t mode);
\r
122 extern uint32_t PWMC_GetStatus2( Pwm* pPwm);
\r
127 #endif /* #ifndef _PWMC_ */
\r