2 * Copyright (c) 2013 - 2015, Freescale Semiconductor, Inc.
\r
3 * Copyright 2016-2018 NXP
\r
4 * All rights reserved.
\r
6 * SPDX-License-Identifier: BSD-3-Clause
\r
8 * Debug console shall provide input and output functions to scan and print formatted data.
\r
9 * o Support a format specifier for PRINTF follows this prototype "%[flags][width][.precision][length]specifier"
\r
10 * - [flags] :'-', '+', '#', ' ', '0'
\r
11 * - [width]: number (0,1...)
\r
12 * - [.precision]: number (0,1...)
\r
13 * - [length]: do not support
\r
14 * - [specifier]: 'd', 'i', 'f', 'F', 'x', 'X', 'o', 'p', 'u', 'c', 's', 'n'
\r
15 * o Support a format specifier for SCANF follows this prototype " %[*][width][length]specifier"
\r
16 * - [*]: is supported.
\r
17 * - [width]: number (0,1...)
\r
18 * - [length]: 'h', 'hh', 'l','ll','L'. ignore ('j','z','t')
\r
19 * - [specifier]: 'd', 'i', 'u', 'f', 'F', 'e', 'E', 'g', 'G', 'a', 'A', 'o', 'c', 's'
\r
22 #ifndef _FSL_DEBUGCONSOLE_H_
\r
23 #define _FSL_DEBUGCONSOLE_H_
\r
25 #include "fsl_common.h"
\r
26 #include "serial_manager.h"
\r
29 * @addtogroup debugconsole
\r
33 /*******************************************************************************
\r
35 ******************************************************************************/
\r
37 /*! @brief Definition select redirect toolchain printf, scanf to uart or not. */
\r
38 #define DEBUGCONSOLE_REDIRECT_TO_TOOLCHAIN 0U /*!< Select toolchain printf and scanf. */
\r
39 #define DEBUGCONSOLE_REDIRECT_TO_SDK 1U /*!< Select SDK version printf, scanf. */
\r
40 #define DEBUGCONSOLE_DISABLE 2U /*!< Disable debugconsole function. */
\r
42 /*! @brief Definition to select sdk or toolchain printf, scanf. */
\r
43 #ifndef SDK_DEBUGCONSOLE
\r
44 #define SDK_DEBUGCONSOLE 1U
\r
47 /*! @brief Definition to select redirect toolchain printf, scanf to uart or not. */
\r
48 #ifndef SDK_DEBUGCONSOLE_UART
\r
49 /* mcux will handle this macro, not define it here */
\r
50 #if (!defined(__MCUXPRESSO))
\r
51 #define SDK_DEBUGCONSOLE_UART
\r
55 #if defined(SDK_DEBUGCONSOLE) && !(SDK_DEBUGCONSOLE)
\r
59 /*! @brief Definition to select redirect toolchain printf, scanf to uart or not.
\r
61 * if SDK_DEBUGCONSOLE defined to 0,it represents select toolchain printf, scanf.
\r
62 * if SDK_DEBUGCONSOLE defined to 1,it represents select SDK version printf, scanf.
\r
63 * if SDK_DEBUGCONSOLE defined to 2,it represents disable debugconsole function.
\r
65 #if SDK_DEBUGCONSOLE == DEBUGCONSOLE_DISABLE /* Disable debug console */
\r
70 #elif SDK_DEBUGCONSOLE == DEBUGCONSOLE_REDIRECT_TO_SDK /* Select printf, scanf, putchar, getchar of SDK version. */
\r
71 #define PRINTF DbgConsole_Printf
\r
72 #define SCANF DbgConsole_Scanf
\r
73 #define PUTCHAR DbgConsole_Putchar
\r
74 #define GETCHAR DbgConsole_Getchar
\r
75 #elif SDK_DEBUGCONSOLE == DEBUGCONSOLE_REDIRECT_TO_TOOLCHAIN /* Select printf, scanf, putchar, getchar of toolchain. \ \
\r
77 #define PRINTF printf
\r
79 #define PUTCHAR putchar
\r
80 #define GETCHAR getchar
\r
81 #endif /* SDK_DEBUGCONSOLE */
\r
83 /*******************************************************************************
\r
85 ******************************************************************************/
\r
87 #if defined(__cplusplus)
\r
89 #endif /* __cplusplus */
\r
91 /*! @name Initialization*/
\r
95 * @brief Initializes the peripheral used for debug messages.
\r
97 * Call this function to enable debug log messages to be output via the specified peripheral
\r
98 * initialized by the serial manager module.
\r
99 * After this function has returned, stdout and stdin are connected to the selected peripheral.
\r
101 * @param instance The instance of the module.
\r
102 * @param baudRate The desired baud rate in bits per second.
\r
103 * @param device Low level device type for the debug console, can be one of the following.
\r
104 * @arg kSerialPort_Uart,
\r
105 * @arg kSerialPort_UsbCdc.
\r
106 * @param clkSrcFreq Frequency of peripheral source clock.
\r
108 * @return Indicates whether initialization was successful or not.
\r
109 * @retval kStatus_Success Execution successfully
\r
111 status_t DbgConsole_Init(uint8_t instance, uint32_t baudRate, serial_port_type_t device, uint32_t clkSrcFreq);
\r
114 * @brief De-initializes the peripheral used for debug messages.
\r
116 * Call this function to disable debug log messages to be output via the specified peripheral
\r
117 * initialized by the serial manager module.
\r
119 * @return Indicates whether de-initialization was successful or not.
\r
121 status_t DbgConsole_Deinit(void);
\r
123 #if SDK_DEBUGCONSOLE
\r
125 * @brief Writes formatted output to the standard output stream.
\r
127 * Call this function to write a formatted output to the standard output stream.
\r
129 * @param formatString Format control string.
\r
130 * @return Returns the number of characters printed or a negative value if an error occurs.
\r
132 int DbgConsole_Printf(const char *formatString, ...);
\r
135 * @brief Writes a character to stdout.
\r
137 * Call this function to write a character to stdout.
\r
139 * @param ch Character to be written.
\r
140 * @return Returns the character written.
\r
142 int DbgConsole_Putchar(int ch);
\r
145 * @brief Reads formatted data from the standard input stream.
\r
147 * Call this function to read formatted data from the standard input stream.
\r
149 * @note Due the limitation in the BM OSA environment (CPU is blocked in the function,
\r
150 * other tasks will not be scheduled), the function cannot be used when the
\r
151 * DEBUG_CONSOLE_TRANSFER_NON_BLOCKING is set in the BM OSA environment.
\r
152 * And an error is returned when the function called in this case. The suggestion
\r
153 * is that polling the non-blocking function DbgConsole_TryGetchar to get the input char.
\r
155 * @param formatString Format control string.
\r
156 * @return Returns the number of fields successfully converted and assigned.
\r
158 int DbgConsole_Scanf(char *formatString, ...);
\r
161 * @brief Reads a character from standard input.
\r
163 * Call this function to read a character from standard input.
\r
165 * @note Due the limitation in the BM OSA environment (CPU is blocked in the function,
\r
166 * other tasks will not be scheduled), the function cannot be used when the
\r
167 * DEBUG_CONSOLE_TRANSFER_NON_BLOCKING is set in the BM OSA environment.
\r
168 * And an error is returned when the function called in this case. The suggestion
\r
169 * is that polling the non-blocking function DbgConsole_TryGetchar to get the input char.
\r
171 * @return Returns the character read.
\r
173 int DbgConsole_Getchar(void);
\r
176 * @brief Debug console flush.
\r
178 * Call this function to wait the tx buffer empty.
\r
179 * If interrupt transfer is using, make sure the global IRQ is enable before call this function
\r
180 * This function should be called when
\r
181 * 1, before enter power down mode
\r
182 * 2, log is required to print to terminal immediately
\r
183 * @return Indicates whether wait idle was successful or not.
\r
185 status_t DbgConsole_Flush(void);
\r
187 #ifdef DEBUG_CONSOLE_TRANSFER_NON_BLOCKING
\r
189 * @brief Debug console try to get char
\r
190 * This function provides a API which will not block current task, if character is
\r
191 * available return it, otherwise return fail.
\r
192 * @param ch the address of char to receive
\r
193 * @return Indicates get char was successful or not.
\r
195 status_t DbgConsole_TryGetchar(char *ch);
\r
198 #endif /* SDK_DEBUGCONSOLE */
\r
202 #if defined(__cplusplus)
\r
204 #endif /* __cplusplus */
\r
208 #endif /* _FSL_DEBUGCONSOLE_H_ */
\r