Update version number in readiness for V10.3.0 release. Sync SVN with reviewed releas...

[freertos] / FreeRTOS-Plus / Source / FreeRTOS-Plus-TCP / portable / NetworkInterface / include / phyHandling.h

diff --git a/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/include/phyHandling.h b/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/include/phyHandling.h
deleted file mode 100644 (file)
index 9e8a113..0000000
--- a/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/include/phyHandling.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*\r
- * Handling of Ethernet PHY's\r
- * PHY's communicate with an EMAC either through\r
- * a Media-Independent Interface (MII), or a Reduced Media-Independent Interface (RMII).\r
- * The EMAC can poll for PHY ports on 32 different addresses. Each of the PHY ports\r
- * shall be treated independently.\r
- * \r
- */\r
-\r
-#ifndef PHYHANDLING_H\r
-\r
-#define PHYHANDLING_H\r
-\r
-#ifdef __cplusplus\r
-extern "C" {\r
-#endif\r
-\r
-\r
-#ifndef ipconfigPHY_MAX_PORTS\r
-       /* There can be at most 32 PHY ports, but in most cases there are 4 or less. */\r
-       #define ipconfigPHY_MAX_PORTS   4\r
-#endif\r
-\r
-/* A generic user-provided function that reads from the PHY-port at 'xAddress'( 0-based ). A 16-bit value shall be stored in\r
-  '*pulValue'. xRegister is the register number ( 0 .. 31 ). In fact all PHY registers are 16-bit.\r
-  Return non-zero in case the action failed. */\r
-typedef BaseType_t ( *xApplicationPhyReadHook_t )( BaseType_t xAddress, BaseType_t xRegister, uint32_t *pulValue );\r
-\r
-/* A generic user-provided function that writes 'ulValue' to the\r
-   PHY-port at 'xAddress' ( 0-based ). xRegister is the register number ( 0 .. 31 ).\r
-   Return non-zero in case the action failed. */\r
-typedef BaseType_t ( *xApplicationPhyWriteHook_t )( BaseType_t xAddress, BaseType_t xRegister, uint32_t ulValue );\r
-\r
-typedef struct xPhyProperties\r
-{\r
-       uint8_t ucSpeed;\r
-       uint8_t ucMDI_X;                /* MDI-X : Medium Dependent Interface - Crossover */\r
-       uint8_t ucDuplex;\r
-       uint8_t ucSpare;\r
-} PhyProperties_t;\r
-\r
-typedef struct xEthernetPhy\r
-{\r
-       xApplicationPhyReadHook_t fnPhyRead;\r
-       xApplicationPhyWriteHook_t fnPhyWrite;\r
-       uint32_t ulPhyIDs[ ipconfigPHY_MAX_PORTS ];\r
-       uint8_t ucPhyIndexes[ ipconfigPHY_MAX_PORTS ];\r
-       TimeOut_t xLinkStatusTimer;\r
-       TickType_t xLinkStatusRemaining;\r
-       BaseType_t xPortCount;\r
-       uint32_t ulBCRValue;\r
-       uint32_t ulACRValue;\r
-       uint32_t ulLinkStatusMask;\r
-       PhyProperties_t xPhyPreferences;\r
-       PhyProperties_t xPhyProperties;\r
-} EthernetPhy_t;\r
-\r
-/* Some defines used internally here to indicate preferences about speed, MDIX\r
-(wired direct or crossed), and duplex (half or full). */\r
-\r
-/* Values for PhyProperties_t::ucSpeed : */\r
-#define        PHY_SPEED_10            1\r
-#define        PHY_SPEED_100           2\r
-#define        PHY_SPEED_AUTO          3\r
-\r
-/* Values for PhyProperties_t::ucMDI_X : */\r
-#define        PHY_MDIX_DIRECT         1\r
-#define        PHY_MDIX_CROSSED        2\r
-#define        PHY_MDIX_AUTO           3\r
-\r
-/* Values for PhyProperties_t::ucDuplex : */\r
-#define        PHY_DUPLEX_HALF         1\r
-#define        PHY_DUPLEX_FULL         2\r
-#define        PHY_DUPLEX_AUTO         3\r
-\r
-/* ID's of supported PHY's : */\r
-#define PHY_ID_LAN8742A                0x0007c130\r
-#define PHY_ID_LAN8720         0x0007c0f0\r
-\r
-#define PHY_ID_KSZ8041         0x000010A1\r
-#define PHY_ID_KSZ8051         0x000010A1\r
-#define PHY_ID_KSZ8081         0x000010A1\r
-\r
-#define PHY_ID_KSZ8863         0x00221430\r
-#define PHY_ID_KSZ8081MNXIA 0x00221560\r
-\r
-#define PHY_ID_DP83848I                0x20005C90\r
-\r
-\r
-/* Initialise the struct and assign a PHY-read and -write function. */\r
-void vPhyInitialise( EthernetPhy_t *pxPhyObject, xApplicationPhyReadHook_t fnPhyRead, xApplicationPhyWriteHook_t fnPhyWrite );\r
-\r
-/* Discover all PHY's connected by polling 32 indexes ( zero-based ) */\r
-BaseType_t xPhyDiscover( EthernetPhy_t *pxPhyObject );\r
-\r
-/* Send a reset command to the connected PHY ports and send configuration. */\r
-BaseType_t xPhyConfigure( EthernetPhy_t *pxPhyObject, const PhyProperties_t *pxPhyProperties );\r
-\r
-/* Give a command to start auto negotiation on a set of PHY port's. */\r
-BaseType_t xPhyStartAutoNegotiation( EthernetPhy_t *pxPhyObject, uint32_t ulPhyMask );\r
-\r
-/* Do not use auto negotiation but use predefined values from 'pxPhyObject->xPhyPreferences'. */\r
-BaseType_t xPhyFixedValue( EthernetPhy_t *pxPhyObject, uint32_t ulPhyMask );\r
-\r
-/* Check the current Link Status.\r
-'xHadReception' : make this true if a packet has been received since the\r
-last call to this function. */\r
-BaseType_t xPhyCheckLinkStatus( EthernetPhy_t *pxPhyObject, BaseType_t xHadReception );\r
-\r
-/* Get the bitmask of a given 'EthernetPhy_t'. */\r
-#define xPhyGetMask( pxPhyObject ) \\r
-       ( ( ( ( uint32_t ) 1u ) << ( pxPhyObject )->xPortCount ) - 1u )\r
-\r
-#ifdef __cplusplus\r
-} /* extern "C" */\r
-#endif\r
-\r
-#endif\r