--- /dev/null
+/*
+ * it87.c - Part of lm_sensors, Linux kernel modules for hardware
+ * monitoring.
+ *
+ * The IT8705F is an LPC-based Super I/O part that contains UARTs, a
+ * parallel port, an IR port, a MIDI port, a floppy controller, etc., in
+ * addition to an Environment Controller (Enhanced Hardware Monitor and
+ * Fan Controller)
+ *
+ * This driver supports only the Environment Controller in the IT8705F and
+ * similar parts. The other devices are supported by different drivers.
+ *
+ * Supports: IT8705F Super I/O chip w/LPC interface
+ * IT8712F Super I/O chip w/LPC interface
+ * IT8716F Super I/O chip w/LPC interface
+ * IT8718F Super I/O chip w/LPC interface
+ * IT8720F Super I/O chip w/LPC interface
+ * IT8721F Super I/O chip w/LPC interface
+ * IT8726F Super I/O chip w/LPC interface
+ * IT8728F Super I/O chip w/LPC interface
+ * IT8758E Super I/O chip w/LPC interface
+ * Sis950 A clone of the IT8705F
+ *
+ * Copyright (C) 2001 Chris Gauthron
+ * Copyright (C) 2005-2010 Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/string.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+#define DRVNAME "it87"
+
+enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728 };
+
+static unsigned short force_id;
+module_param(force_id, ushort, 0);
+MODULE_PARM_DESC(force_id, "Override the detected device ID");
+
+static struct platform_device *pdev;
+
+#define REG 0x2e /* The register to read/write */
+#define DEV 0x07 /* Register: Logical device select */
+#define VAL 0x2f /* The value to read/write */
+#define PME 0x04 /* The device with the fan registers in it */
+
+/* The device with the IT8718F/IT8720F VID value in it */
+#define GPIO 0x07
+
+#define DEVID 0x20 /* Register: Device ID */
+#define DEVREV 0x22 /* Register: Device Revision */
+
+static inline int superio_inb(int reg)
+{
+ outb(reg, REG);
+ return inb(VAL);
+}
+
+static inline void superio_outb(int reg, int val)
+{
+ outb(reg, REG);
+ outb(val, VAL);
+}
+
+static int superio_inw(int reg)
+{
+ int val;
+ outb(reg++, REG);
+ val = inb(VAL) << 8;
+ outb(reg, REG);
+ val |= inb(VAL);
+ return val;
+}
+
+static inline void superio_select(int ldn)
+{
+ outb(DEV, REG);
+ outb(ldn, VAL);
+}
+
+static inline int superio_enter(void)
+{
+ /*
+ * Try to reserve REG and REG + 1 for exclusive access.
+ */
+ if (!request_muxed_region(REG, 2, DRVNAME))
+ return -EBUSY;
+
+ outb(0x87, REG);
+ outb(0x01, REG);
+ outb(0x55, REG);
+ outb(0x55, REG);
+ return 0;
+}
+
+static inline void superio_exit(void)
+{
+ outb(0x02, REG);
+ outb(0x02, VAL);
+ release_region(REG, 2);
+}
+
+/* Logical device 4 registers */
+#define IT8712F_DEVID 0x8712
+#define IT8705F_DEVID 0x8705
+#define IT8716F_DEVID 0x8716
+#define IT8718F_DEVID 0x8718
+#define IT8720F_DEVID 0x8720
+#define IT8721F_DEVID 0x8721
+#define IT8726F_DEVID 0x8726
+#define IT8728F_DEVID 0x8728
+#define IT87_ACT_REG 0x30
+#define IT87_BASE_REG 0x60
+
+/* Logical device 7 registers (IT8712F and later) */
+#define IT87_SIO_GPIO3_REG 0x27
+#define IT87_SIO_GPIO5_REG 0x29
+#define IT87_SIO_PINX2_REG 0x2c /* Pin selection */
+#define IT87_SIO_VID_REG 0xfc /* VID value */
+#define IT87_SIO_BEEP_PIN_REG 0xf6 /* Beep pin mapping */
+
+/* Update battery voltage after every reading if true */
+static bool update_vbat;
+
+/* Not all BIOSes properly configure the PWM registers */
+static bool fix_pwm_polarity;
+
+/* Many IT87 constants specified below */
+
+/* Length of ISA address segment */
+#define IT87_EXTENT 8
+
+/* Length of ISA address segment for Environmental Controller */
+#define IT87_EC_EXTENT 2
+
+/* Offset of EC registers from ISA base address */
+#define IT87_EC_OFFSET 5
+
+/* Where are the ISA address/data registers relative to the EC base address */
+#define IT87_ADDR_REG_OFFSET 0
+#define IT87_DATA_REG_OFFSET 1
+
+/*----- The IT87 registers -----*/
+
+#define IT87_REG_CONFIG 0x00
+
+#define IT87_REG_ALARM1 0x01
+#define IT87_REG_ALARM2 0x02
+#define IT87_REG_ALARM3 0x03
+
+/*
+ * The IT8718F and IT8720F have the VID value in a different register, in
+ * Super-I/O configuration space.
+ */
+#define IT87_REG_VID 0x0a
+/*
+ * The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
+ * for fan divisors. Later IT8712F revisions must use 16-bit tachometer
+ * mode.
+ */
+#define IT87_REG_FAN_DIV 0x0b
+#define IT87_REG_FAN_16BIT 0x0c
+
+/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */
+
+static const u8 IT87_REG_FAN[] = { 0x0d, 0x0e, 0x0f, 0x80, 0x82 };
+static const u8 IT87_REG_FAN_MIN[] = { 0x10, 0x11, 0x12, 0x84, 0x86 };
+static const u8 IT87_REG_FANX[] = { 0x18, 0x19, 0x1a, 0x81, 0x83 };
+static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
+#define IT87_REG_FAN_MAIN_CTRL 0x13
+#define IT87_REG_FAN_CTL 0x14
+#define IT87_REG_PWM(nr) (0x15 + (nr))
+#define IT87_REG_PWM_DUTY(nr) (0x63 + (nr) * 8)
+
+#define IT87_REG_VIN(nr) (0x20 + (nr))
+#define IT87_REG_TEMP(nr) (0x29 + (nr))
+
+#define IT87_REG_VIN_MAX(nr) (0x30 + (nr) * 2)
+#define IT87_REG_VIN_MIN(nr) (0x31 + (nr) * 2)
+#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
+#define IT87_REG_TEMP_LOW(nr) (0x41 + (nr) * 2)
+
+#define IT87_REG_VIN_ENABLE 0x50
+#define IT87_REG_TEMP_ENABLE 0x51
+#define IT87_REG_BEEP_ENABLE 0x5c
+
+#define IT87_REG_CHIPID 0x58
+
+#define IT87_REG_AUTO_TEMP(nr, i) (0x60 + (nr) * 8 + (i))
+#define IT87_REG_AUTO_PWM(nr, i) (0x65 + (nr) * 8 + (i))
+
+
+struct it87_sio_data {
+ enum chips type;
+ /* Values read from Super-I/O config space */
+ u8 revision;
+ u8 vid_value;
+ u8 beep_pin;
+ u8 internal; /* Internal sensors can be labeled */
+ /* Features skipped based on config or DMI */
+ u8 skip_vid;
+ u8 skip_fan;
+ u8 skip_pwm;
+};
+
+/*
+ * For each registered chip, we need to keep some data in memory.
+ * The structure is dynamically allocated.
+ */
+struct it87_data {
+ struct device *hwmon_dev;
+ enum chips type;
+ u8 revision;
+
+ unsigned short addr;
+ const char *name;
+ struct mutex update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ u16 in_scaled; /* Internal voltage sensors are scaled */
+ u8 in[9]; /* Register value */
+ u8 in_max[8]; /* Register value */
+ u8 in_min[8]; /* Register value */
+ u8 has_fan; /* Bitfield, fans enabled */
+ u16 fan[5]; /* Register values, possibly combined */
+ u16 fan_min[5]; /* Register values, possibly combined */
+ s8 temp[3]; /* Register value */
+ s8 temp_high[3]; /* Register value */
+ s8 temp_low[3]; /* Register value */
+ u8 sensor; /* Register value */
+ u8 fan_div[3]; /* Register encoding, shifted right */
+ u8 vid; /* Register encoding, combined */
+ u8 vrm;
+ u32 alarms; /* Register encoding, combined */
+ u8 beeps; /* Register encoding */
+ u8 fan_main_ctrl; /* Register value */
+ u8 fan_ctl; /* Register value */
+
+ /*
+ * The following 3 arrays correspond to the same registers up to
+ * the IT8720F. The meaning of bits 6-0 depends on the value of bit
+ * 7, and we want to preserve settings on mode changes, so we have
+ * to track all values separately.
+ * Starting with the IT8721F, the manual PWM duty cycles are stored
+ * in separate registers (8-bit values), so the separate tracking
+ * is no longer needed, but it is still done to keep the driver
+ * simple.
+ */
+ u8 pwm_ctrl[3]; /* Register value */
+ u8 pwm_duty[3]; /* Manual PWM value set by user */
+ u8 pwm_temp_map[3]; /* PWM to temp. chan. mapping (bits 1-0) */
+
+ /* Automatic fan speed control registers */
+ u8 auto_pwm[3][4]; /* [nr][3] is hard-coded */
+ s8 auto_temp[3][5]; /* [nr][0] is point1_temp_hyst */
+};
+
+static inline int has_12mv_adc(const struct it87_data *data)
+{
+ /*
+ * IT8721F and later have a 12 mV ADC, also with internal scaling
+ * on selected inputs.
+ */
+ return data->type == it8721
+ || data->type == it8728;
+}
+
+static inline int has_newer_autopwm(const struct it87_data *data)
+{
+ /*
+ * IT8721F and later have separate registers for the temperature
+ * mapping and the manual duty cycle.
+ */
+ return data->type == it8721
+ || data->type == it8728;
+}
+
+static u8 in_to_reg(const struct it87_data *data, int nr, long val)
+{
+ long lsb;
+
+ if (has_12mv_adc(data)) {
+ if (data->in_scaled & (1 << nr))
+ lsb = 24;
+ else
+ lsb = 12;
+ } else
+ lsb = 16;
+
+ val = DIV_ROUND_CLOSEST(val, lsb);
+ return SENSORS_LIMIT(val, 0, 255);
+}
+
+static int in_from_reg(const struct it87_data *data, int nr, int val)
+{
+ if (has_12mv_adc(data)) {
+ if (data->in_scaled & (1 << nr))
+ return val * 24;
+ else
+ return val * 12;
+ } else
+ return val * 16;
+}
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+ if (rpm == 0)
+ return 255;
+ rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+ return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
+ 254);
+}
+
+static inline u16 FAN16_TO_REG(long rpm)
+{
+ if (rpm == 0)
+ return 0xffff;
+ return SENSORS_LIMIT((1350000 + rpm) / (rpm * 2), 1, 0xfffe);
+}
+
+#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : (val) == 255 ? 0 : \
+ 1350000 / ((val) * (div)))
+/* The divider is fixed to 2 in 16-bit mode */
+#define FAN16_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
+ 1350000 / ((val) * 2))
+
+#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (((val) - 500) / 1000) : \
+ ((val) + 500) / 1000), -128, 127))
+#define TEMP_FROM_REG(val) ((val) * 1000)
+
+static u8 pwm_to_reg(const struct it87_data *data, long val)
+{
+ if (has_newer_autopwm(data))
+ return val;
+ else
+ return val >> 1;
+}
+
+static int pwm_from_reg(const struct it87_data *data, u8 reg)
+{
+ if (has_newer_autopwm(data))
+ return reg;
+ else
+ return (reg & 0x7f) << 1;
+}
+
+
+static int DIV_TO_REG(int val)
+{
+ int answer = 0;
+ while (answer < 7 && (val >>= 1))
+ answer++;
+ return answer;
+}
+#define DIV_FROM_REG(val) (1 << (val))
+
+static const unsigned int pwm_freq[8] = {
+ 48000000 / 128,
+ 24000000 / 128,
+ 12000000 / 128,
+ 8000000 / 128,
+ 6000000 / 128,
+ 3000000 / 128,
+ 1500000 / 128,
+ 750000 / 128,
+};
+
+static inline int has_16bit_fans(const struct it87_data *data)
+{
+ /*
+ * IT8705F Datasheet 0.4.1, 3h == Version G.
+ * IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
+ * These are the first revisions with 16-bit tachometer support.
+ */
+ return (data->type == it87 && data->revision >= 0x03)
+ || (data->type == it8712 && data->revision >= 0x08)
+ || data->type == it8716
+ || data->type == it8718
+ || data->type == it8720
+ || data->type == it8721
+ || data->type == it8728;
+}
+
+static inline int has_old_autopwm(const struct it87_data *data)
+{
+ /*
+ * The old automatic fan speed control interface is implemented
+ * by IT8705F chips up to revision F and IT8712F chips up to
+ * revision G.
+ */
+ return (data->type == it87 && data->revision < 0x03)
+ || (data->type == it8712 && data->revision < 0x08);
+}
+
+static int it87_probe(struct platform_device *pdev);
+static int __devexit it87_remove(struct platform_device *pdev);
+
+static int it87_read_value(struct it87_data *data, u8 reg);
+static void it87_write_value(struct it87_data *data, u8 reg, u8 value);
+static struct it87_data *it87_update_device(struct device *dev);
+static int it87_check_pwm(struct device *dev);
+static void it87_init_device(struct platform_device *pdev);
+
+
+static struct platform_driver it87_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
+ },
+ .probe = it87_probe,
+ .remove = __devexit_p(it87_remove),
+};
+
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in_min[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in_max[nr]));
+}
+
+static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->in_min[nr] = in_to_reg(data, nr, val);
+ it87_write_value(data, IT87_REG_VIN_MIN(nr),
+ data->in_min[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->in_max[nr] = in_to_reg(data, nr, val);
+ it87_write_value(data, IT87_REG_VIN_MAX(nr),
+ data->in_max[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define show_in_offset(offset) \
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in, NULL, offset);
+
+#define limit_in_offset(offset) \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, set_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, set_in_max, offset);
+
+show_in_offset(0);
+limit_in_offset(0);
+show_in_offset(1);
+limit_in_offset(1);
+show_in_offset(2);
+limit_in_offset(2);
+show_in_offset(3);
+limit_in_offset(3);
+show_in_offset(4);
+limit_in_offset(4);
+show_in_offset(5);
+limit_in_offset(5);
+show_in_offset(6);
+limit_in_offset(6);
+show_in_offset(7);
+limit_in_offset(7);
+show_in_offset(8);
+
+/* 3 temperatures */
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
+}
+static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr]));
+}
+static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr]));
+}
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = dev_get_drvdata(dev);
+ long val;
+
+ if (kstrtol(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->temp_high[nr] = TEMP_TO_REG(val);
+ it87_write_value(data, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = dev_get_drvdata(dev);
+ long val;
+
+ if (kstrtol(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->temp_low[nr] = TEMP_TO_REG(val);
+ it87_write_value(data, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+#define show_temp_offset(offset) \
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_temp, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
+ show_temp_max, set_temp_max, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
+ show_temp_min, set_temp_min, offset - 1);
+
+show_temp_offset(1);
+show_temp_offset(2);
+show_temp_offset(3);
+
+static ssize_t show_sensor(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct it87_data *data = it87_update_device(dev);
+ u8 reg = data->sensor; /* In case value is updated while used */
+
+ if (reg & (1 << nr))
+ return sprintf(buf, "3\n"); /* thermal diode */
+ if (reg & (8 << nr))
+ return sprintf(buf, "4\n"); /* thermistor */
+ return sprintf(buf, "0\n"); /* disabled */
+}
+static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = dev_get_drvdata(dev);
+ long val;
+ u8 reg;
+
+ if (kstrtol(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ reg = it87_read_value(data, IT87_REG_TEMP_ENABLE);
+ reg &= ~(1 << nr);
+ reg &= ~(8 << nr);
+ if (val == 2) { /* backwards compatibility */
+ dev_warn(dev, "Sensor type 2 is deprecated, please use 4 "
+ "instead\n");
+ val = 4;
+ }
+ /* 3 = thermal diode; 4 = thermistor; 0 = disabled */
+ if (val == 3)
+ reg |= 1 << nr;
+ else if (val == 4)
+ reg |= 8 << nr;
+ else if (val != 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->sensor = reg;
+ it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor);
+ data->valid = 0; /* Force cache refresh */
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+#define show_sensor_offset(offset) \
+static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
+ show_sensor, set_sensor, offset - 1);
+
+show_sensor_offset(1);
+show_sensor_offset(2);
+show_sensor_offset(3);
+
+/* 3 Fans */
+
+static int pwm_mode(const struct it87_data *data, int nr)
+{
+ int ctrl = data->fan_main_ctrl & (1 << nr);
+
+ if (ctrl == 0) /* Full speed */
+ return 0;
+ if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
+ return 2;
+ else /* Manual mode */
+ return 1;
+}
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+ DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
+ DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+static ssize_t show_pwm_enable(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", pwm_mode(data, nr));
+}
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n",
+ pwm_from_reg(data, data->pwm_duty[nr]));
+}
+static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct it87_data *data = it87_update_device(dev);
+ int index = (data->fan_ctl >> 4) & 0x07;
+
+ return sprintf(buf, "%u\n", pwm_freq[index]);
+}
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = dev_get_drvdata(dev);
+ long val;
+ u8 reg;
+
+ if (kstrtol(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ reg = it87_read_value(data, IT87_REG_FAN_DIV);
+ switch (nr) {
+ case 0:
+ data->fan_div[nr] = reg & 0x07;
+ break;
+ case 1:
+ data->fan_div[nr] = (reg >> 3) & 0x07;
+ break;
+ case 2:
+ data->fan_div[nr] = (reg & 0x40) ? 3 : 1;
+ break;
+ }
+
+ data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+ it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int min;
+ u8 old;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ old = it87_read_value(data, IT87_REG_FAN_DIV);
+
+ /* Save fan min limit */
+ min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]));
+
+ switch (nr) {
+ case 0:
+ case 1:
+ data->fan_div[nr] = DIV_TO_REG(val);
+ break;
+ case 2:
+ if (val < 8)
+ data->fan_div[nr] = 1;
+ else
+ data->fan_div[nr] = 3;
+ }
+ val = old & 0x80;
+ val |= (data->fan_div[0] & 0x07);
+ val |= (data->fan_div[1] & 0x07) << 3;
+ if (data->fan_div[2] == 3)
+ val |= 0x1 << 6;
+ it87_write_value(data, IT87_REG_FAN_DIV, val);
+
+ /* Restore fan min limit */
+ data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+ it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]);
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+/* Returns 0 if OK, -EINVAL otherwise */
+static int check_trip_points(struct device *dev, int nr)
+{
+ const struct it87_data *data = dev_get_drvdata(dev);
+ int i, err = 0;
+
+ if (has_old_autopwm(data)) {
+ for (i = 0; i < 3; i++) {
+ if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1])
+ err = -EINVAL;
+ }
+ for (i = 0; i < 2; i++) {
+ if (data->auto_pwm[nr][i] > data->auto_pwm[nr][i + 1])
+ err = -EINVAL;
+ }
+ }
+
+ if (err) {
+ dev_err(dev, "Inconsistent trip points, not switching to "
+ "automatic mode\n");
+ dev_err(dev, "Adjust the trip points and try again\n");
+ }
+ return err;
+}
+
+static ssize_t set_pwm_enable(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = dev_get_drvdata(dev);
+ long val;
+
+ if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 2)
+ return -EINVAL;
+
+ /* Check trip points before switching to automatic mode */
+ if (val == 2) {
+ if (check_trip_points(dev, nr) < 0)
+ return -EINVAL;
+ }
+
+ mutex_lock(&data->update_lock);
+
+ if (val == 0) {
+ int tmp;
+ /* make sure the fan is on when in on/off mode */
+ tmp = it87_read_value(data, IT87_REG_FAN_CTL);
+ it87_write_value(data, IT87_REG_FAN_CTL, tmp | (1 << nr));
+ /* set on/off mode */
+ data->fan_main_ctrl &= ~(1 << nr);
+ it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
+ data->fan_main_ctrl);
+ } else {
+ if (val == 1) /* Manual mode */
+ data->pwm_ctrl[nr] = has_newer_autopwm(data) ?
+ data->pwm_temp_map[nr] :
+ data->pwm_duty[nr];
+ else /* Automatic mode */
+ data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
+ it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
+ /* set SmartGuardian mode */
+ data->fan_main_ctrl |= (1 << nr);
+ it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
+ data->fan_main_ctrl);
+ }
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = dev_get_drvdata(dev);
+ long val;
+
+ if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 255)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ if (has_newer_autopwm(data)) {
+ /*
+ * If we are in automatic mode, the PWM duty cycle register
+ * is read-only so we can't write the value.
+ */
+ if (data->pwm_ctrl[nr] & 0x80) {
+ mutex_unlock(&data->update_lock);
+ return -EBUSY;
+ }
+ data->pwm_duty[nr] = pwm_to_reg(data, val);
+ it87_write_value(data, IT87_REG_PWM_DUTY(nr),
+ data->pwm_duty[nr]);
+ } else {
+ data->pwm_duty[nr] = pwm_to_reg(data, val);
+ /*
+ * If we are in manual mode, write the duty cycle immediately;
+ * otherwise, just store it for later use.
+ */
+ if (!(data->pwm_ctrl[nr] & 0x80)) {
+ data->pwm_ctrl[nr] = data->pwm_duty[nr];
+ it87_write_value(data, IT87_REG_PWM(nr),
+ data->pwm_ctrl[nr]);
+ }
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t set_pwm_freq(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int i;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ /* Search for the nearest available frequency */
+ for (i = 0; i < 7; i++) {
+ if (val > (pwm_freq[i] + pwm_freq[i+1]) / 2)
+ break;
+ }
+
+ mutex_lock(&data->update_lock);
+ data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL) & 0x8f;
+ data->fan_ctl |= i << 4;
+ it87_write_value(data, IT87_REG_FAN_CTL, data->fan_ctl);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+static ssize_t show_pwm_temp_map(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ int map;
+
+ if (data->pwm_temp_map[nr] < 3)
+ map = 1 << data->pwm_temp_map[nr];
+ else
+ map = 0; /* Should never happen */
+ return sprintf(buf, "%d\n", map);
+}
+static ssize_t set_pwm_temp_map(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = dev_get_drvdata(dev);
+ long val;
+ u8 reg;
+
+ /*
+ * This check can go away if we ever support automatic fan speed
+ * control on newer chips.
+ */
+ if (!has_old_autopwm(data)) {
+ dev_notice(dev, "Mapping change disabled for safety reasons\n");
+ return -EINVAL;
+ }
+
+ if (kstrtol(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ switch (val) {
+ case (1 << 0):
+ reg = 0x00;
+ break;
+ case (1 << 1):
+ reg = 0x01;
+ break;
+ case (1 << 2):
+ reg = 0x02;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mutex_lock(&data->update_lock);
+ data->pwm_temp_map[nr] = reg;
+ /*
+ * If we are in automatic mode, write the temp mapping immediately;
+ * otherwise, just store it for later use.
+ */
+ if (data->pwm_ctrl[nr] & 0x80) {
+ data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
+ it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t show_auto_pwm(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct it87_data *data = it87_update_device(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int point = sensor_attr->index;
+
+ return sprintf(buf, "%d\n",
+ pwm_from_reg(data, data->auto_pwm[nr][point]));
+}
+
+static ssize_t set_auto_pwm(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int point = sensor_attr->index;
+ long val;
+
+ if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 255)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->auto_pwm[nr][point] = pwm_to_reg(data, val);
+ it87_write_value(data, IT87_REG_AUTO_PWM(nr, point),
+ data->auto_pwm[nr][point]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t show_auto_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct it87_data *data = it87_update_device(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int point = sensor_attr->index;
+
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->auto_temp[nr][point]));
+}
+
+static ssize_t set_auto_temp(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int point = sensor_attr->index;
+ long val;
+
+ if (kstrtol(buf, 10, &val) < 0 || val < -128000 || val > 127000)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->auto_temp[nr][point] = TEMP_TO_REG(val);
+ it87_write_value(data, IT87_REG_AUTO_TEMP(nr, point),
+ data->auto_temp[nr][point]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define show_fan_offset(offset) \
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, set_fan_min, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+ show_fan_div, set_fan_div, offset - 1);
+
+show_fan_offset(1);
+show_fan_offset(2);
+show_fan_offset(3);
+
+#define show_pwm_offset(offset) \
+static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
+ show_pwm_enable, set_pwm_enable, offset - 1); \
+static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+ show_pwm, set_pwm, offset - 1); \
+static DEVICE_ATTR(pwm##offset##_freq, \
+ (offset == 1 ? S_IRUGO | S_IWUSR : S_IRUGO), \
+ show_pwm_freq, (offset == 1 ? set_pwm_freq : NULL)); \
+static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels_temp, \
+ S_IRUGO | S_IWUSR, show_pwm_temp_map, set_pwm_temp_map, \
+ offset - 1); \
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_pwm, \
+ S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm, \
+ offset - 1, 0); \
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point2_pwm, \
+ S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm, \
+ offset - 1, 1); \
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point3_pwm, \
+ S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm, \
+ offset - 1, 2); \
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point4_pwm, \
+ S_IRUGO, show_auto_pwm, NULL, offset - 1, 3); \
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_temp, \
+ S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
+ offset - 1, 1); \
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_temp_hyst, \
+ S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
+ offset - 1, 0); \
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point2_temp, \
+ S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
+ offset - 1, 2); \
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point3_temp, \
+ S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
+ offset - 1, 3); \
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point4_temp, \
+ S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
+ offset - 1, 4);
+
+show_pwm_offset(1);
+show_pwm_offset(2);
+show_pwm_offset(3);
+
+/* A different set of callbacks for 16-bit fans */
+static ssize_t show_fan16(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan[nr]));
+}
+
+static ssize_t show_fan16_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan_min[nr]));
+}
+
+static ssize_t set_fan16_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct it87_data *data = dev_get_drvdata(dev);
+ long val;
+
+ if (kstrtol(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->fan_min[nr] = FAN16_TO_REG(val);
+ it87_write_value(data, IT87_REG_FAN_MIN[nr],
+ data->fan_min[nr] & 0xff);
+ it87_write_value(data, IT87_REG_FANX_MIN[nr],
+ data->fan_min[nr] >> 8);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+/*
+ * We want to use the same sysfs file names as 8-bit fans, but we need
+ * different variable names, so we have to use SENSOR_ATTR instead of
+ * SENSOR_DEVICE_ATTR.
+ */
+#define show_fan16_offset(offset) \
+static struct sensor_device_attribute sensor_dev_attr_fan##offset##_input16 \
+ = SENSOR_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan16, NULL, offset - 1); \
+static struct sensor_device_attribute sensor_dev_attr_fan##offset##_min16 \
+ = SENSOR_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan16_min, set_fan16_min, offset - 1)
+
+show_fan16_offset(1);
+show_fan16_offset(2);
+show_fan16_offset(3);
+show_fan16_offset(4);
+show_fan16_offset(5);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%u\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+
+static ssize_t clear_intrusion(struct device *dev, struct device_attribute
+ *attr, const char *buf, size_t count)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ long val;
+ int config;
+
+ if (kstrtol(buf, 10, &val) < 0 || val != 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ config = it87_read_value(data, IT87_REG_CONFIG);
+ if (config < 0) {
+ count = config;
+ } else {
+ config |= 1 << 5;
+ it87_write_value(data, IT87_REG_CONFIG, config);
+ /* Invalidate cache to force re-read */
+ data->valid = 0;
+ }
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 12);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 13);
+static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 14);
+static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 15);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
+static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
+ show_alarm, clear_intrusion, 4);
+
+static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%u\n", (data->beeps >> bitnr) & 1);
+}
+static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ struct it87_data *data = dev_get_drvdata(dev);
+ long val;
+
+ if (kstrtol(buf, 10, &val) < 0
+ || (val != 0 && val != 1))
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
+ if (val)
+ data->beeps |= (1 << bitnr);
+ else
+ data->beeps &= ~(1 << bitnr);
+ it87_write_value(data, IT87_REG_BEEP_ENABLE, data->beeps);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
+ show_beep, set_beep, 1);
+static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO, show_beep, NULL, 1);
+/* fanX_beep writability is set later */
+static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan4_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan5_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
+ show_beep, set_beep, 2);
+static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO, show_beep, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO, show_beep, NULL, 2);
+
+static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%u\n", data->vrm);
+}
+static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ data->vrm = val;
+
+ return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+
+static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+
+static ssize_t show_label(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ static const char * const labels[] = {
+ "+5V",
+ "5VSB",
+ "Vbat",
+ };
+ static const char * const labels_it8721[] = {
+ "+3.3V",
+ "3VSB",
+ "Vbat",
+ };
+ struct it87_data *data = dev_get_drvdata(dev);
+ int nr = to_sensor_dev_attr(attr)->index;
+
+ return sprintf(buf, "%s\n", has_12mv_adc(data) ? labels_it8721[nr]
+ : labels[nr]);
+}
+static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 0);
+static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 2);
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+static struct attribute *it87_attributes[] = {
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in8_input.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in5_min.dev_attr.attr,
+ &sensor_dev_attr_in6_min.dev_attr.attr,
+ &sensor_dev_attr_in7_min.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in5_max.dev_attr.attr,
+ &sensor_dev_attr_in6_max.dev_attr.attr,
+ &sensor_dev_attr_in7_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
+ &sensor_dev_attr_in6_alarm.dev_attr.attr,
+ &sensor_dev_attr_in7_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_type.dev_attr.attr,
+ &sensor_dev_attr_temp2_type.dev_attr.attr,
+ &sensor_dev_attr_temp3_type.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+
+ &dev_attr_alarms.attr,
+ &sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
+ &dev_attr_name.attr,
+ NULL
+};
+
+static const struct attribute_group it87_group = {
+ .attrs = it87_attributes,
+};
+
+static struct attribute *it87_attributes_beep[] = {
+ &sensor_dev_attr_in0_beep.dev_attr.attr,
+ &sensor_dev_attr_in1_beep.dev_attr.attr,
+ &sensor_dev_attr_in2_beep.dev_attr.attr,
+ &sensor_dev_attr_in3_beep.dev_attr.attr,
+ &sensor_dev_attr_in4_beep.dev_attr.attr,
+ &sensor_dev_attr_in5_beep.dev_attr.attr,
+ &sensor_dev_attr_in6_beep.dev_attr.attr,
+ &sensor_dev_attr_in7_beep.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_beep.dev_attr.attr,
+ &sensor_dev_attr_temp2_beep.dev_attr.attr,
+ &sensor_dev_attr_temp3_beep.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group it87_group_beep = {
+ .attrs = it87_attributes_beep,
+};
+
+static struct attribute *it87_attributes_fan16[5][3+1] = { {
+ &sensor_dev_attr_fan1_input16.dev_attr.attr,
+ &sensor_dev_attr_fan1_min16.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_fan2_input16.dev_attr.attr,
+ &sensor_dev_attr_fan2_min16.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_fan3_input16.dev_attr.attr,
+ &sensor_dev_attr_fan3_min16.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_fan4_input16.dev_attr.attr,
+ &sensor_dev_attr_fan4_min16.dev_attr.attr,
+ &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_fan5_input16.dev_attr.attr,
+ &sensor_dev_attr_fan5_min16.dev_attr.attr,
+ &sensor_dev_attr_fan5_alarm.dev_attr.attr,
+ NULL
+} };
+
+static const struct attribute_group it87_group_fan16[5] = {
+ { .attrs = it87_attributes_fan16[0] },
+ { .attrs = it87_attributes_fan16[1] },
+ { .attrs = it87_attributes_fan16[2] },
+ { .attrs = it87_attributes_fan16[3] },
+ { .attrs = it87_attributes_fan16[4] },
+};
+
+static struct attribute *it87_attributes_fan[3][4+1] = { {
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_div.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_div.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_div.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ NULL
+} };
+
+static const struct attribute_group it87_group_fan[3] = {
+ { .attrs = it87_attributes_fan[0] },
+ { .attrs = it87_attributes_fan[1] },
+ { .attrs = it87_attributes_fan[2] },
+};
+
+static const struct attribute_group *
+it87_get_fan_group(const struct it87_data *data)
+{
+ return has_16bit_fans(data) ? it87_group_fan16 : it87_group_fan;
+}
+
+static struct attribute *it87_attributes_pwm[3][4+1] = { {
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &dev_attr_pwm1_freq.attr,
+ &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &dev_attr_pwm2_freq.attr,
+ &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+ &dev_attr_pwm3_freq.attr,
+ &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
+ NULL
+} };
+
+static const struct attribute_group it87_group_pwm[3] = {
+ { .attrs = it87_attributes_pwm[0] },
+ { .attrs = it87_attributes_pwm[1] },
+ { .attrs = it87_attributes_pwm[2] },
+};
+
+static struct attribute *it87_attributes_autopwm[3][9+1] = { {
+ &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point1_temp_hyst.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr,
+ NULL
+}, {
+ &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point3_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point4_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point1_temp_hyst.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point4_temp.dev_attr.attr,
+ NULL
+} };
+
+static const struct attribute_group it87_group_autopwm[3] = {
+ { .attrs = it87_attributes_autopwm[0] },
+ { .attrs = it87_attributes_autopwm[1] },
+ { .attrs = it87_attributes_autopwm[2] },
+};
+
+static struct attribute *it87_attributes_fan_beep[] = {
+ &sensor_dev_attr_fan1_beep.dev_attr.attr,
+ &sensor_dev_attr_fan2_beep.dev_attr.attr,
+ &sensor_dev_attr_fan3_beep.dev_attr.attr,
+ &sensor_dev_attr_fan4_beep.dev_attr.attr,
+ &sensor_dev_attr_fan5_beep.dev_attr.attr,
+};
+
+static struct attribute *it87_attributes_vid[] = {
+ &dev_attr_vrm.attr,
+ &dev_attr_cpu0_vid.attr,
+ NULL
+};
+
+static const struct attribute_group it87_group_vid = {
+ .attrs = it87_attributes_vid,
+};
+
+static struct attribute *it87_attributes_label[] = {
+ &sensor_dev_attr_in3_label.dev_attr.attr,
+ &sensor_dev_attr_in7_label.dev_attr.attr,
+ &sensor_dev_attr_in8_label.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group it87_group_label = {
+ .attrs = it87_attributes_label,
+};
+
+/* SuperIO detection - will change isa_address if a chip is found */
+static int __init it87_find(unsigned short *address,
+ struct it87_sio_data *sio_data)
+{
+ int err;
+ u16 chip_type;
+ const char *board_vendor, *board_name;
+
+ err = superio_enter();
+ if (err)
+ return err;
+
+ err = -ENODEV;
+ chip_type = force_id ? force_id : superio_inw(DEVID);
+
+ switch (chip_type) {
+ case IT8705F_DEVID:
+ sio_data->type = it87;
+ break;
+ case IT8712F_DEVID:
+ sio_data->type = it8712;
+ break;
+ case IT8716F_DEVID:
+ case IT8726F_DEVID:
+ sio_data->type = it8716;
+ break;
+ case IT8718F_DEVID:
+ sio_data->type = it8718;
+ break;
+ case IT8720F_DEVID:
+ sio_data->type = it8720;
+ break;
+ case IT8721F_DEVID:
+ sio_data->type = it8721;
+ break;
+ case IT8728F_DEVID:
+ sio_data->type = it8728;
+ break;
+ case 0xffff: /* No device at all */
+ goto exit;
+ default:
+ pr_debug("Unsupported chip (DEVID=0x%x)\n", chip_type);
+ goto exit;
+ }
+
+ superio_select(PME);
+ if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
+ pr_info("Device not activated, skipping\n");
+ goto exit;
+ }
+
+ *address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
+ if (*address == 0) {
+ pr_info("Base address not set, skipping\n");
+ goto exit;
+ }
+
+ err = 0;
+ sio_data->revision = superio_inb(DEVREV) & 0x0f;
+ pr_info("Found IT%04xF chip at 0x%x, revision %d\n",
+ chip_type, *address, sio_data->revision);
+
+ /* in8 (Vbat) is always internal */
+ sio_data->internal = (1 << 2);
+
+ /* Read GPIO config and VID value from LDN 7 (GPIO) */
+ if (sio_data->type == it87) {
+ /* The IT8705F doesn't have VID pins at all */
+ sio_data->skip_vid = 1;
+
+ /* The IT8705F has a different LD number for GPIO */
+ superio_select(5);
+ sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
+ } else {
+ int reg;
+
+ superio_select(GPIO);
+
+ reg = superio_inb(IT87_SIO_GPIO3_REG);
+ if (sio_data->type == it8721 || sio_data->type == it8728) {
+ /*
+ * The IT8721F/IT8758E doesn't have VID pins at all,
+ * not sure about the IT8728F.
+ */
+ sio_data->skip_vid = 1;
+ } else {
+ /* We need at least 4 VID pins */
+ if (reg & 0x0f) {
+ pr_info("VID is disabled (pins used for GPIO)\n");
+ sio_data->skip_vid = 1;
+ }
+ }
+
+ /* Check if fan3 is there or not */
+ if (reg & (1 << 6))
+ sio_data->skip_pwm |= (1 << 2);
+ if (reg & (1 << 7))
+ sio_data->skip_fan |= (1 << 2);
+
+ /* Check if fan2 is there or not */
+ reg = superio_inb(IT87_SIO_GPIO5_REG);
+ if (reg & (1 << 1))
+ sio_data->skip_pwm |= (1 << 1);
+ if (reg & (1 << 2))
+ sio_data->skip_fan |= (1 << 1);
+
+ if ((sio_data->type == it8718 || sio_data->type == it8720)
+ && !(sio_data->skip_vid))
+ sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
+
+ reg = superio_inb(IT87_SIO_PINX2_REG);
+ /*
+ * The IT8720F has no VIN7 pin, so VCCH should always be
+ * routed internally to VIN7 with an internal divider.
+ * Curiously, there still is a configuration bit to control
+ * this, which means it can be set incorrectly. And even
+ * more curiously, many boards out there are improperly
+ * configured, even though the IT8720F datasheet claims
+ * that the internal routing of VCCH to VIN7 is the default
+ * setting. So we force the internal routing in this case.
+ */
+ if (sio_data->type == it8720 && !(reg & (1 << 1))) {
+ reg |= (1 << 1);
+ superio_outb(IT87_SIO_PINX2_REG, reg);
+ pr_notice("Routing internal VCCH to in7\n");
+ }
+ if (reg & (1 << 0))
+ sio_data->internal |= (1 << 0);
+ if ((reg & (1 << 1)) || sio_data->type == it8721 ||
+ sio_data->type == it8728)
+ sio_data->internal |= (1 << 1);
+
+ sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
+ }
+ if (sio_data->beep_pin)
+ pr_info("Beeping is supported\n");
+
+ /* Disable specific features based on DMI strings */
+ board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+ if (board_vendor && board_name) {
+ if (strcmp(board_vendor, "nVIDIA") == 0
+ && strcmp(board_name, "FN68PT") == 0) {
+ /*
+ * On the Shuttle SN68PT, FAN_CTL2 is apparently not
+ * connected to a fan, but to something else. One user
+ * has reported instant system power-off when changing
+ * the PWM2 duty cycle, so we disable it.
+ * I use the board name string as the trigger in case
+ * the same board is ever used in other systems.
+ */
+ pr_info("Disabling pwm2 due to hardware constraints\n");
+ sio_data->skip_pwm = (1 << 1);
+ }
+ }
+
+exit:
+ superio_exit();
+ return err;
+}
+
+static void it87_remove_files(struct device *dev)
+{
+ struct it87_data *data = platform_get_drvdata(pdev);
+ struct it87_sio_data *sio_data = dev->platform_data;
+ const struct attribute_group *fan_group = it87_get_fan_group(data);
+ int i;
+
+ sysfs_remove_group(&dev->kobj, &it87_group);
+ if (sio_data->beep_pin)
+ sysfs_remove_group(&dev->kobj, &it87_group_beep);
+ for (i = 0; i < 5; i++) {
+ if (!(data->has_fan & (1 << i)))
+ continue;
+ sysfs_remove_group(&dev->kobj, &fan_group[i]);
+ if (sio_data->beep_pin)
+ sysfs_remove_file(&dev->kobj,
+ it87_attributes_fan_beep[i]);
+ }
+ for (i = 0; i < 3; i++) {
+ if (sio_data->skip_pwm & (1 << 0))
+ continue;
+ sysfs_remove_group(&dev->kobj, &it87_group_pwm[i]);
+ if (has_old_autopwm(data))
+ sysfs_remove_group(&dev->kobj,
+ &it87_group_autopwm[i]);
+ }
+ if (!sio_data->skip_vid)
+ sysfs_remove_group(&dev->kobj, &it87_group_vid);
+ sysfs_remove_group(&dev->kobj, &it87_group_label);
+}
+
+static int __devinit it87_probe(struct platform_device *pdev)
+{
+ struct it87_data *data;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ struct it87_sio_data *sio_data = dev->platform_data;
+ const struct attribute_group *fan_group;
+ int err = 0, i;
+ int enable_pwm_interface;
+ int fan_beep_need_rw;
+ static const char * const names[] = {
+ "it87",
+ "it8712",
+ "it8716",
+ "it8718",
+ "it8720",
+ "it8721",
+ "it8728",
+ };
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, IT87_EC_EXTENT, DRVNAME)) {
+ dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
+ (unsigned long)res->start,
+ (unsigned long)(res->start + IT87_EC_EXTENT - 1));
+ err = -EBUSY;
+ goto ERROR0;
+ }
+
+ data = kzalloc(sizeof(struct it87_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto ERROR1;
+ }
+
+ data->addr = res->start;
+ data->type = sio_data->type;
+ data->revision = sio_data->revision;
+ data->name = names[sio_data->type];
+
+ /* Now, we do the remaining detection. */
+ if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80)
+ || it87_read_value(data, IT87_REG_CHIPID) != 0x90) {
+ err = -ENODEV;
+ goto ERROR2;
+ }
+
+ platform_set_drvdata(pdev, data);
+
+ mutex_init(&data->update_lock);
+
+ /* Check PWM configuration */
+ enable_pwm_interface = it87_check_pwm(dev);
+
+ /* Starting with IT8721F, we handle scaling of internal voltages */
+ if (has_12mv_adc(data)) {
+ if (sio_data->internal & (1 << 0))
+ data->in_scaled |= (1 << 3); /* in3 is AVCC */
+ if (sio_data->internal & (1 << 1))
+ data->in_scaled |= (1 << 7); /* in7 is VSB */
+ if (sio_data->internal & (1 << 2))
+ data->in_scaled |= (1 << 8); /* in8 is Vbat */
+ }
+
+ /* Initialize the IT87 chip */
+ it87_init_device(pdev);
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&dev->kobj, &it87_group);
+ if (err)
+ goto ERROR2;
+
+ if (sio_data->beep_pin) {
+ err = sysfs_create_group(&dev->kobj, &it87_group_beep);
+ if (err)
+ goto ERROR4;
+ }
+
+ /* Do not create fan files for disabled fans */
+ fan_group = it87_get_fan_group(data);
+ fan_beep_need_rw = 1;
+ for (i = 0; i < 5; i++) {
+ if (!(data->has_fan & (1 << i)))
+ continue;
+ err = sysfs_create_group(&dev->kobj, &fan_group[i]);
+ if (err)
+ goto ERROR4;
+
+ if (sio_data->beep_pin) {
+ err = sysfs_create_file(&dev->kobj,
+ it87_attributes_fan_beep[i]);
+ if (err)
+ goto ERROR4;
+ if (!fan_beep_need_rw)
+ continue;
+
+ /*
+ * As we have a single beep enable bit for all fans,
+ * only the first enabled fan has a writable attribute
+ * for it.
+ */
+ if (sysfs_chmod_file(&dev->kobj,
+ it87_attributes_fan_beep[i],
+ S_IRUGO | S_IWUSR))
+ dev_dbg(dev, "chmod +w fan%d_beep failed\n",
+ i + 1);
+ fan_beep_need_rw = 0;
+ }
+ }
+
+ if (enable_pwm_interface) {
+ for (i = 0; i < 3; i++) {
+ if (sio_data->skip_pwm & (1 << i))
+ continue;
+ err = sysfs_create_group(&dev->kobj,
+ &it87_group_pwm[i]);
+ if (err)
+ goto ERROR4;
+
+ if (!has_old_autopwm(data))
+ continue;
+ err = sysfs_create_group(&dev->kobj,
+ &it87_group_autopwm[i]);
+ if (err)
+ goto ERROR4;
+ }
+ }
+
+ if (!sio_data->skip_vid) {
+ data->vrm = vid_which_vrm();
+ /* VID reading from Super-I/O config space if available */
+ data->vid = sio_data->vid_value;
+ err = sysfs_create_group(&dev->kobj, &it87_group_vid);
+ if (err)
+ goto ERROR4;
+ }
+
+ /* Export labels for internal sensors */
+ for (i = 0; i < 3; i++) {
+ if (!(sio_data->internal & (1 << i)))
+ continue;
+ err = sysfs_create_file(&dev->kobj,
+ it87_attributes_label[i]);
+ if (err)
+ goto ERROR4;
+ }
+
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto ERROR4;
+ }
+
+ return 0;
+
+ERROR4:
+ it87_remove_files(dev);
+ERROR2:
+ platform_set_drvdata(pdev, NULL);
+ kfree(data);
+ERROR1:
+ release_region(res->start, IT87_EC_EXTENT);
+ERROR0:
+ return err;
+}
+
+static int __devexit it87_remove(struct platform_device *pdev)
+{
+ struct it87_data *data = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ it87_remove_files(&pdev->dev);
+
+ release_region(data->addr, IT87_EC_EXTENT);
+ platform_set_drvdata(pdev, NULL);
+ kfree(data);
+
+ return 0;
+}
+
+/*
+ * Must be called with data->update_lock held, except during initialization.
+ * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
+ * would slow down the IT87 access and should not be necessary.
+ */
+static int it87_read_value(struct it87_data *data, u8 reg)
+{
+ outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
+ return inb_p(data->addr + IT87_DATA_REG_OFFSET);
+}
+
+/*
+ * Must be called with data->update_lock held, except during initialization.
+ * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
+ * would slow down the IT87 access and should not be necessary.
+ */
+static void it87_write_value(struct it87_data *data, u8 reg, u8 value)
+{
+ outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
+ outb_p(value, data->addr + IT87_DATA_REG_OFFSET);
+}
+
+/* Return 1 if and only if the PWM interface is safe to use */
+static int __devinit it87_check_pwm(struct device *dev)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ /*
+ * Some BIOSes fail to correctly configure the IT87 fans. All fans off
+ * and polarity set to active low is sign that this is the case so we
+ * disable pwm control to protect the user.
+ */
+ int tmp = it87_read_value(data, IT87_REG_FAN_CTL);
+ if ((tmp & 0x87) == 0) {
+ if (fix_pwm_polarity) {
+ /*
+ * The user asks us to attempt a chip reconfiguration.
+ * This means switching to active high polarity and
+ * inverting all fan speed values.
+ */
+ int i;
+ u8 pwm[3];
+
+ for (i = 0; i < 3; i++)
+ pwm[i] = it87_read_value(data,
+ IT87_REG_PWM(i));
+
+ /*
+ * If any fan is in automatic pwm mode, the polarity
+ * might be correct, as suspicious as it seems, so we
+ * better don't change anything (but still disable the
+ * PWM interface).
+ */
+ if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
+ dev_info(dev, "Reconfiguring PWM to "
+ "active high polarity\n");
+ it87_write_value(data, IT87_REG_FAN_CTL,
+ tmp | 0x87);
+ for (i = 0; i < 3; i++)
+ it87_write_value(data,
+ IT87_REG_PWM(i),
+ 0x7f & ~pwm[i]);
+ return 1;
+ }
+
+ dev_info(dev, "PWM configuration is "
+ "too broken to be fixed\n");
+ }
+
+ dev_info(dev, "Detected broken BIOS "
+ "defaults, disabling PWM interface\n");
+ return 0;
+ } else if (fix_pwm_polarity) {
+ dev_info(dev, "PWM configuration looks "
+ "sane, won't touch\n");
+ }
+
+ return 1;
+}
+
+/* Called when we have found a new IT87. */
+static void __devinit it87_init_device(struct platform_device *pdev)
+{
+ struct it87_sio_data *sio_data = pdev->dev.platform_data;
+ struct it87_data *data = platform_get_drvdata(pdev);
+ int tmp, i;
+ u8 mask;
+
+ /*
+ * For each PWM channel:
+ * - If it is in automatic mode, setting to manual mode should set
+ * the fan to full speed by default.
+ * - If it is in manual mode, we need a mapping to temperature
+ * channels to use when later setting to automatic mode later.
+ * Use a 1:1 mapping by default (we are clueless.)
+ * In both cases, the value can (and should) be changed by the user
+ * prior to switching to a different mode.
+ * Note that this is no longer needed for the IT8721F and later, as
+ * these have separate registers for the temperature mapping and the
+ * manual duty cycle.
+ */
+ for (i = 0; i < 3; i++) {
+ data->pwm_temp_map[i] = i;
+ data->pwm_duty[i] = 0x7f; /* Full speed */
+ data->auto_pwm[i][3] = 0x7f; /* Full speed, hard-coded */
+ }
+
+ /*
+ * Some chips seem to have default value 0xff for all limit
+ * registers. For low voltage limits it makes no sense and triggers
+ * alarms, so change to 0 instead. For high temperature limits, it
+ * means -1 degree C, which surprisingly doesn't trigger an alarm,
+ * but is still confusing, so change to 127 degrees C.
+ */
+ for (i = 0; i < 8; i++) {
+ tmp = it87_read_value(data, IT87_REG_VIN_MIN(i));
+ if (tmp == 0xff)
+ it87_write_value(data, IT87_REG_VIN_MIN(i), 0);
+ }
+ for (i = 0; i < 3; i++) {
+ tmp = it87_read_value(data, IT87_REG_TEMP_HIGH(i));
+ if (tmp == 0xff)
+ it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
+ }
+
+ /*
+ * Temperature channels are not forcibly enabled, as they can be
+ * set to two different sensor types and we can't guess which one
+ * is correct for a given system. These channels can be enabled at
+ * run-time through the temp{1-3}_type sysfs accessors if needed.
+ */
+
+ /* Check if voltage monitors are reset manually or by some reason */
+ tmp = it87_read_value(data, IT87_REG_VIN_ENABLE);
+ if ((tmp & 0xff) == 0) {
+ /* Enable all voltage monitors */
+ it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff);
+ }
+
+ /* Check if tachometers are reset manually or by some reason */
+ mask = 0x70 & ~(sio_data->skip_fan << 4);
+ data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
+ if ((data->fan_main_ctrl & mask) == 0) {
+ /* Enable all fan tachometers */
+ data->fan_main_ctrl |= mask;
+ it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
+ data->fan_main_ctrl);
+ }
+ data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
+
+ /* Set tachometers to 16-bit mode if needed */
+ if (has_16bit_fans(data)) {
+ tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
+ if (~tmp & 0x07 & data->has_fan) {
+ dev_dbg(&pdev->dev,
+ "Setting fan1-3 to 16-bit mode\n");
+ it87_write_value(data, IT87_REG_FAN_16BIT,
+ tmp | 0x07);
+ }
+ /* IT8705F only supports three fans. */
+ if (data->type != it87) {
+ if (tmp & (1 << 4))
+ data->has_fan |= (1 << 3); /* fan4 enabled */
+ if (tmp & (1 << 5))
+ data->has_fan |= (1 << 4); /* fan5 enabled */
+ }
+ }
+
+ /* Fan input pins may be used for alternative functions */
+ data->has_fan &= ~sio_data->skip_fan;
+
+ /* Start monitoring */
+ it87_write_value(data, IT87_REG_CONFIG,
+ (it87_read_value(data, IT87_REG_CONFIG) & 0x36)
+ | (update_vbat ? 0x41 : 0x01));
+}
+
+static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
+{
+ data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr));
+ if (has_newer_autopwm(data)) {
+ data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
+ data->pwm_duty[nr] = it87_read_value(data,
+ IT87_REG_PWM_DUTY(nr));
+ } else {
+ if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
+ data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
+ else /* Manual mode */
+ data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+ }
+
+ if (has_old_autopwm(data)) {
+ int i;
+
+ for (i = 0; i < 5 ; i++)
+ data->auto_temp[nr][i] = it87_read_value(data,
+ IT87_REG_AUTO_TEMP(nr, i));
+ for (i = 0; i < 3 ; i++)
+ data->auto_pwm[nr][i] = it87_read_value(data,
+ IT87_REG_AUTO_PWM(nr, i));
+ }
+}
+
+static struct it87_data *it87_update_device(struct device *dev)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ if (update_vbat) {
+ /*
+ * Cleared after each update, so reenable. Value
+ * returned by this read will be previous value
+ */
+ it87_write_value(data, IT87_REG_CONFIG,
+ it87_read_value(data, IT87_REG_CONFIG) | 0x40);
+ }
+ for (i = 0; i <= 7; i++) {
+ data->in[i] =
+ it87_read_value(data, IT87_REG_VIN(i));
+ data->in_min[i] =
+ it87_read_value(data, IT87_REG_VIN_MIN(i));
+ data->in_max[i] =
+ it87_read_value(data, IT87_REG_VIN_MAX(i));
+ }
+ /* in8 (battery) has no limit registers */
+ data->in[8] = it87_read_value(data, IT87_REG_VIN(8));
+
+ for (i = 0; i < 5; i++) {
+ /* Skip disabled fans */
+ if (!(data->has_fan & (1 << i)))
+ continue;
+
+ data->fan_min[i] =
+ it87_read_value(data, IT87_REG_FAN_MIN[i]);
+ data->fan[i] = it87_read_value(data,
+ IT87_REG_FAN[i]);
+ /* Add high byte if in 16-bit mode */
+ if (has_16bit_fans(data)) {
+ data->fan[i] |= it87_read_value(data,
+ IT87_REG_FANX[i]) << 8;
+ data->fan_min[i] |= it87_read_value(data,
+ IT87_REG_FANX_MIN[i]) << 8;
+ }
+ }
+ for (i = 0; i < 3; i++) {
+ data->temp[i] =
+ it87_read_value(data, IT87_REG_TEMP(i));
+ data->temp_high[i] =
+ it87_read_value(data, IT87_REG_TEMP_HIGH(i));
+ data->temp_low[i] =
+ it87_read_value(data, IT87_REG_TEMP_LOW(i));
+ }
+
+ /* Newer chips don't have clock dividers */
+ if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
+ i = it87_read_value(data, IT87_REG_FAN_DIV);
+ data->fan_div[0] = i & 0x07;
+ data->fan_div[1] = (i >> 3) & 0x07;
+ data->fan_div[2] = (i & 0x40) ? 3 : 1;
+ }
+
+ data->alarms =
+ it87_read_value(data, IT87_REG_ALARM1) |
+ (it87_read_value(data, IT87_REG_ALARM2) << 8) |
+ (it87_read_value(data, IT87_REG_ALARM3) << 16);
+ data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
+
+ data->fan_main_ctrl = it87_read_value(data,
+ IT87_REG_FAN_MAIN_CTRL);
+ data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
+ for (i = 0; i < 3; i++)
+ it87_update_pwm_ctrl(data, i);
+
+ data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
+ /*
+ * The IT8705F does not have VID capability.
+ * The IT8718F and later don't use IT87_REG_VID for the
+ * same purpose.
+ */
+ if (data->type == it8712 || data->type == it8716) {
+ data->vid = it87_read_value(data, IT87_REG_VID);
+ /*
+ * The older IT8712F revisions had only 5 VID pins,
+ * but we assume it is always safe to read 6 bits.
+ */
+ data->vid &= 0x3f;
+ }
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+static int __init it87_device_add(unsigned short address,
+ const struct it87_sio_data *sio_data)
+{
+ struct resource res = {
+ .start = address + IT87_EC_OFFSET,
+ .end = address + IT87_EC_OFFSET + IT87_EC_EXTENT - 1,
+ .name = DRVNAME,
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ err = acpi_check_resource_conflict(&res);
+ if (err)
+ goto exit;
+
+ pdev = platform_device_alloc(DRVNAME, address);
+ if (!pdev) {
+ err = -ENOMEM;
+ pr_err("Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ pr_err("Device resource addition failed (%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add_data(pdev, sio_data,
+ sizeof(struct it87_sio_data));
+ if (err) {
+ pr_err("Platform data allocation failed\n");
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ pr_err("Device addition failed (%d)\n", err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
+static int __init sm_it87_init(void)
+{
+ int err;
+ unsigned short isa_address = 0;
+ struct it87_sio_data sio_data;
+
+ memset(&sio_data, 0, sizeof(struct it87_sio_data));
+ err = it87_find(&isa_address, &sio_data);
+ if (err)
+ return err;
+ err = platform_driver_register(&it87_driver);
+ if (err)
+ return err;
+
+ err = it87_device_add(isa_address, &sio_data);
+ if (err) {
+ platform_driver_unregister(&it87_driver);
+ return err;
+ }
+
+ return 0;
+}
+
+static void __exit sm_it87_exit(void)
+{
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&it87_driver);
+}
+
+
+MODULE_AUTHOR("Chris Gauthron, "
+ "Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("IT8705F/IT871xF/IT872xF hardware monitoring driver");
+module_param(update_vbat, bool, 0);
+MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
+module_param(fix_pwm_polarity, bool, 0);
+MODULE_PARM_DESC(fix_pwm_polarity,
+ "Force PWM polarity to active high (DANGEROUS)");
+MODULE_LICENSE("GPL");
+
+module_init(sm_it87_init);
+module_exit(sm_it87_exit);
projects / groeck-it87 / commitdiff