Merge pull request #1600 from Deiz/libi3

[i3/i3] / debian / changelog

i3-wm (4.10.2-1) experimental; urgency=medium

  * NOT YET RELEASED.

 -- Michael Stapelberg <stapelberg@debian.org>  Sun, 29 Mar 2015 19:10:38 +0200

i3-wm (4.10.1-1) experimental; urgency=medium

  * New upstream release.

 -- Michael Stapelberg <stapelberg@debian.org>  Sun, 29 Mar 2015 18:54:07 +0200

i3-wm (4.10-1) experimental; urgency=medium

  * New upstream release.

 -- Michael Stapelberg <stapelberg@debian.org>  Sun, 29 Mar 2015 17:46:09 +0200

i3-wm (4.9.1-1) experimental; urgency=medium

  * New upstream release.

 -- Michael Stapelberg <stapelberg@debian.org>  Sat, 07 Mar 2015 20:01:46 +0100

i3-wm (4.9-1) experimental; urgency=medium

  * New upstream release.

 -- Michael Stapelberg <stapelberg@debian.org>  Sat, 28 Feb 2015 14:53:34 +0100

i3-wm (4.8-2) unstable; urgency=medium

  * Backport two bugfixes:
    - backport-dpi-fix.patch (Closes: #778460)
    - backport-i3bar-tray-fix.patch (Closes: #778461)

 -- Michael Stapelberg <stapelberg@debian.org>  Sun, 15 Feb 2015 13:24:42 +0100

i3-wm (4.8-1) unstable; urgency=medium

  * New upstream release.
  * Bump standards-version to 3.9.5 (no changes necessary)

 -- Michael Stapelberg <stapelberg@debian.org>  Sun, 15 Jun 2014 19:15:29 +0200

i3-wm (4.7.2-1) unstable; urgency=low

  * New upstream release. (Closes: #736396)

 -- Michael Stapelberg <stapelberg@debian.org>  Thu, 23 Jan 2014 23:03:03 +0100

i3-wm (4.7.1-1) unstable; urgency=low

  * New upstream release.

 -- Michael Stapelberg <stapelberg@debian.org>  Tue, 21 Jan 2014 19:29:34 +0100

i3-wm (4.7-1) unstable; urgency=low

  * New upstream release.

 -- Michael Stapelberg <stapelberg@debian.org>  Sun, 22 Dec 2013 21:19:02 +0100

i3-wm (4.6-1) unstable; urgency=low

  * New upstream release.

 -- Michael Stapelberg <stapelberg@debian.org>  Wed, 07 Aug 2013 20:53:26 +0200

i3-wm (4.5.1-2) unstable; urgency=low

  * experimental to unstable because i3-wm 4.5.1 was only in experimental due
    to the freeze.
  * bump standards-version to 3.9.4 (no changes necessary)

 -- Michael Stapelberg <stapelberg@debian.org>  Tue, 14 May 2013 20:48:16 +0200

i3-wm (4.5.1-1) experimental; urgency=low

  * New upstream release

 -- Michael Stapelberg <stapelberg@debian.org>  Mon, 18 Mar 2013 22:50:12 +0100

i3-wm (4.5-1) experimental; urgency=low

  * New upstream release

 -- Michael Stapelberg <stapelberg@debian.org>  Tue, 12 Mar 2013 13:51:04 +0100

i3-wm (4.4-1) experimental; urgency=low

  * New upstream release

 -- Michael Stapelberg <stapelberg@debian.org>  Tue, 11 Dec 2012 22:52:56 +0100

i3-wm (4.3-1) experimental; urgency=low

  * New upstream release

 -- Michael Stapelberg <stapelberg@debian.org>  Wed, 19 Sep 2012 18:13:40 +0200

i3-wm (4.2-1) unstable; urgency=low

  * New upstream release

 -- Michael Stapelberg <stapelberg@debian.org>  Wed, 25 Apr 2012 23:19:44 +0200

i3-wm (4.1.2-3) unstable; urgency=low

  * Disable generation of docs/refcard.pdf (Closes: #666363)
  * Add debian/i3-wm.menu (Closes: #664697)
  * Bump standards-version to 3.9.3 (no changes needed)
  * Fix 'section' field of the i3-wm source package to 'x11'
  * Email change: Michael Stapelberg -> stapelberg@debian.org

 -- Michael Stapelberg <stapelberg@debian.org>  Thu, 12 Apr 2012 16:09:58 +0200

i3-wm (4.1.2-2) unstable; urgency=low

  * Rebuild against libyajl and libxcb from unstable

 -- Michael Stapelberg <michael@stapelberg.de>  Fri, 27 Jan 2012 19:50:29 +0000

i3-wm (4.1.2-1) unstable; urgency=low

  * Bugfix: Don’t lose focus on fullscreen windows when another window gets
    moved to that workspace
  * Bugfix: Open new windows in the correct place when assignments match
  * Bugfix: Fix assignments of floating windows to (yet) unused workspaces
  * Bugfix: Either use SetInputFocus *or* send WM_TAKE_FOCUS, not both
  * Bugfix: Respect WM_HINTS.input for WM_TAKE_FOCUS clients
  * Bugfix: Setup the _NET_SUPPORTING_WM_CHECK atom in a standards-compliant
    way
  * Bugfix: Only ignore EnterNotify events after UnmapNotifies from managed
    windows
  * Bugfix: Force a new sequence number after UnmapNotify
  * Bugfix: Position floating windows exactly where their geometry specified
  * Bugfix: Fix coordinates when the rect of an output changes

 -- Michael Stapelberg <michael@stapelberg.de>  Fri, 27 Jan 2012 19:04:28 +0000

i3-wm (4.1.1-1) unstable; urgency=low

  * Re-add build-arch/build-indep targets to debian/rules (Closes: #648613)
  * Create a secure temp path instead of a predictable one
  * ipc: set CLOEXEC on client file descriptors
  * Fix prototype in include/xcursor.h
  * Bugfix: Skip dock clients when handling FocusIn events
  * Bugfix: Fix fullscreen with floating windows
  * Bugfix: Fix startup when RandR is not present
  * Bugfix: Retain window position and size when changing floating border
  * Bugfix: Disallow focusing dock clients via criteria
  * Bugfix: Don’t create a workspace named 'back_and_forth' on startup
  * Bugfix: Fix wrong focus in complex tabbed/stacked layouts
  * Bugfix: Fix resizing for (e.g.) v-split containers in h-split containers
  * Bugfix: Fix 'resize' command in nested containers
  * Bugfix: Don’t set the _NET_WM_WORKAREA hint at all
  * Bugfix: Skip leading whitespace in variable assignments
  * Bugfix: Make resizing of tiling windows with floating_modifier use absolute
    coordinates
  * Bugfix: Make resizing work when pressing floating_modifier + right mouse
    button on window decorations
  * Bugfix: Fix setting the same mark repeatedly on different windows
  * Bugfix: Disallow focusing other windows when in fullscreen mode
  * Bugfix: Ignore ConfigureRequests with out-of-bound coordinates
  * Bugfix: Correctly check boundaries and reassign floating windows when
    moving
  * Bugfix: Don’t close workspace when there are still floating windows on it

 -- Michael Stapelberg <michael@stapelberg.de>  Sat, 24 Dec 2011 16:23:55 +0100

i3-wm (4.1-1) unstable; urgency=low

  * Switch to dpkg-source 3.0 (quilt) and compat level 7
  * Implement system tray support in i3bar (for NetworkManager, Skype, …)
  * i3bar is now configurable in the i3 configfile
  * Implement support for PCRE regular expressions in criteria
  * Implement a new assign syntax which uses criteria
  * Sort named workspaces whose name starts with a number accordingly
  * Warn on duplicate bindings for the same key
  * Restrict 'resize' command to left/right for horizontal containers, up/down
    for vertical containers
  * Implement support for startup notifications (cursor will change to 'watch',
    started applications show up on the workspace they have been launched on)
  * Implement the GET_MARKS IPC request to get all marks
  * Implement the new_float config option (border style for floating windows)
  * Implement passing IPC sockets to i3 (systemd-style socket activation)
  * Implement the 'move output' command to move containers to a specific output
  * Implement focus switching for floating windows
  * Implement the window_role criterion (for matching multi-window apps)
  * Implement a force_xinerama configuration directive
  * Implement the --get-socketpath, useful for scripts using the IPC interface
  * Implement the 'move workspace next' and 'move workspace prev' commands
  * Implement the 'workspace back_and_forth' command and related configuration
    option
  * Implement the move command for floating windows
  * i3 will now handle arbitrary text arguments by sending them as an IPC
    command, like i3-msg: 'i3 reload' or 'i3 move workspace 3'
  * Introduce the i3-sensible-{pager,editor,terminal} scripts to execute
    $PAGER, $EDITOR or an available terminal emulator
  * i3-input: implement -F (format) option
  * Bugfix: Preserve marks when restarting
  * Bugfix: Correctly free old assignments when reloading
  * Bugfix: Fix flickering when moving floating windows between monitors
  * Bugfix: Correctly handle ConfigureRequests for floating windows in a
    multi-monitor environment.
  * Bugfix: Fix size of floating windows with X11 borders
  * Bugfix: Always adjust floating window position when moving to another
    output
  * Bugfix: Avoid out-of-bounds coordinates when moving floating windows
  * Bugfix: Don’t steal focus when a window gets destroyed
  * Bugfix: Correctly split key/value when parsing variables
  * Bugfix: Correctly revert focus to other floating windows when closing a
    floating window
  * Bugfix: Don’t leak the error logfile file descriptor
  * Bugfix: Don’t steal focus when a window opens on an invisible workspace due
    to assignments
  * Bugfix: Fix handling of Mode_switch in i3-input
  * Bugfix: Close invisible workspaces when they become empty
  * Bugfix: Don’t invoke interactive resizing when clicking on the decoration
    of a split container with more than one child (switch focus instead)
  * Bugfix: Make named workspace assignments work again
  * Bugfix: RandR: Correctly keep focus on the focused workspace when an output
    disappears
  * Bugfix: Insert container at the correct position on workspace level when
    workspace_layout == default

 -- Michael Stapelberg <michael@stapelberg.de>  Fri, 11 Nov 2011 21:28:15 +0000

i3-wm (4.0.2-1) unstable; urgency=low

  * i3-config-wizard: handle mouse button clicks on <win> and <alt> texts
  * i3-config-wizard: check the modifier mapping to decide whether to use Mod1
    or Mod4
  * migrate-config: use \s, be a bit more whitespace tolerant
  * userguide: s/mod+h/mod+s for stacking
  * userguide: provide the default colors in the colors example
  * userguide: document force_focus_wrapping directive
  * userguide: properly document the resize command
  * userguide: properly document command chaining and criteria
  * Bugfix: Correctly bind on multiple keycodes if a symbol has more than one
  * Bugfix: Allow multiple criteria in 'for_window'
  * Bugfix: Ensure a minimum size when using the 'resize' command
  * Bugfix: Start on the first named workspace, not always on '1'
  * Bugfix: Fix resize command with direction != up for floating windows
  * Bugfix: Correctly set the _NET_CLIENT_LIST_STACKING hint (chromium tabbar)
  * Bugfix: 'workspace <next|prev>' now takes all outputs into account
  * Bugfix: i3-wsbar: make workspace names clickable again
  * Bugfix: i3-wsbar: correctly handle EOF on stdin
  * Bugfix: i3-wsbar: display a separator between workspaces of each output
  * Bugfix: Correctly handle the 'instance' criterion (WM_CLASS)
  * Bugfix: Use correct format string in load_layout (fixes crash in restart)
  * Bugfix: Fix border rendering (border lines were "cutting" through)
  * Bugfix: Raise floating windows immediately when dragging/resizing
  * Bugfix: Make focus switching work accross outputs again
  * Bugfix: migration-script: handle resize top/bottom correctly
  * Bugfix: Fix focus issue when moving containers to workspaces
  * Bugfix: Warp cursor when changing outputs again
  * Bugfix: i3bar: fix switching to workspaces with extremely long names
  * Bugfix: i3bar: fix switching to workspaces "next" and "prev"
  * Bugfix: i3bar: Correctly allocate pixmap for statuslines which are longer
    than the screen
  * Bugfix: i3bar: set statusline = NULL on EOF / SIGCHLD
  * Bugfix: Correctly initialize the verbose flag
  * Bugfix: Don’t start with workspace 'next' when the command 'workspace next'
    is bound in the config file
  * Bugfix: Set focus to where the mouse pointer is when starting
  * Bugfix: Don’t change focus when assigned windows start on invisible
    workspaces
  * Bugfix: Don’t use absolute paths for exec in the config file
  * Bugfix: Fix crash when using 'focus mode_toggle' on an empty workspace
  * Bugfix: Make the 'resize' command work inside tabbed/stacked cons
  * Bugfix: Correctly place floating windows on their appropriate output
  * Bugfix: Fix coordinates when moving a floating window to a different output
  * Bugfix: Correctly keep focus when moving non-leaf windows
  * Bugfix: Accept '\t' in the set command
  * Bugfix: Only consider tiling windows when attaching tiling windows to a
    workspace
  * Bugfix: Correctly render containers when a split container is focused
  * Bugfix: Correctly recognize duplicate workspace assignments
  * Bugfix: Re-enable X11 Eventmask *after* pushing all the X11 changes
  * Bugfix: Fix focus stealing with assignments of floating windows
  * Bugfix: Re-implement reconfiguring height of dock windows
  * Bugfix: IPC: return name_json if available
  * Bugfix: Make 'floating enable' check for dock windows

 -- Michael Stapelberg <michael@stapelberg.de>  Sun, 28 Aug 2011 19:07:43 +0200

i3-wm (4.0.1-1) unstable; urgency=low

  * Fix the build process of i3bar (Closes: #636274)
  * Fix the build process on Mac OS X
  * i3-config-wizard: also start i3bar in the keycode config template
  * userguide: Remove the obsolete bar.* colors
  * userguide: Use i3bar instead of dzen2 in the 'exec' example

 -- Michael Stapelberg <michael@stapelberg.de>  Mon, 01 Aug 2011 23:31:06 +0200

i3-wm (4.0-1) unstable; urgency=low

  * In addition to the proper flex/bison based parser for the config file
    introduced in 3.δ, we now also have a flex/bison parser for commands. What
    this means is that we can have more human-readable, beautiful command names
    instead of cryptic commands like 'f' for fullscreen or 'mh' for move left.
    In fact, the commands for the aforementioned functions *are* 'fullscreen'
    and 'move left'!
  * You can now chain commands using ';' (a semicolon). One example for that is
    'workspace 3 ; exec /usr/bin/urxvt' to switch to a new workspace and open a
    terminal.
  * You can specify which windows should be affected by your command by using
    different criteria. A good example is '[class="Firefox"] kill' to get rid
    of all Firefox windows.
  * As the configuration file needs new commands (and a few options are
    obsolete), you need to change it. To make this process a little bit easier
    for you, this release comes with the script i3-migrate-config-to-v4. Just
    run it on your current config file and it will spit out a v4 config file to
    stdout. To make things even better, i3 automatically detects v3 config files
    and calls that script, so you never end up with a non-working config :).
  * Similarly to the criteria when using commands, we now have a 'for_window'
    configuration directive, which lets you automatically apply certain commands
    to certain windows. Use it to set border styles per window, for example with
    'for_window [class="XTerm"] border 1pixel'.
  * Since dock clients (like dzen2) are now part of the layout tree (as opposed
    to a custom data structure as before), it was easy to implement top and
    bottom dock areas. Programs which properly specify the dock hint get placed
    on the edge of the screen they request. i3bar has the -dtop and -dbottom
    parameters, for example.
  * The internal workspace bar is obsolete. Use i3bar instead.
  * Resizing now works between all windows!
  * Fullscreen now works for everything!
  * Floating now works for everything!
  * Your layout is now preserved when doing an inplace restart.
  * When you have an error in your config file, a new program called i3-nagbar
    will tell you so. It offers you two buttons: One to view the error in your
    $PAGER and one to edit your config in your $EDITOR.
  * The default config used key symbols (like 'bind Mod1+f fullscreen') instead
    of key codes. If you use a non-qwerty layout, the program i3-config-wizard
    can create a key symbol based config file based on your current layout. You
    can also chose between Windows (Mod4) and Alt (Mod1) as your default
    modifier. i3-config-wizard will automatically be started as long as you
    don’t have a configuration file for i3.
  * Custom X cursor themes are now supported.
  * The RandR backend now respects the primary output.
  * A wrong 'font' configuration in your config file will no longer make i3
    exit. Instead, it will fall back to a different font and tell you about the
    error in its log.
  * The default split direction (whether a new window gets placed right next to
    the current one or below the current one) is now automatically set to
    horizontal if you have a monitor that is wider than high or vertical if you
    a monitor which is higher than wide. This works great with rotated monitors.
  * Sockets and temporary files are now placed in XDG_RUNTIME_DIR, if set (this
    is used on systemd based systems).
  * Tools like i3bar, i3-msg etc. use the I3_SOCKET_PATH property which is set
    to the X11 root window, so you don’t have to configure your socket path
    anywhere.
  * The kill command kills single windows by default now. To kill a whole
    application, use 'kill client'.
  * IPC: Commands can now have custom replies. When the parser encounters an
    error, a proper error reply is sent.
  * There is now an 'exec_always' configuration directive which works like
    'exec' but will also be run when restarting.

 -- Michael Stapelberg <michael@stapelberg.de>  Sun, 31 Jul 2011 22:34:26 +0200

i3-wm (3.e-bf1-3) unstable; urgency=low

  * include keyboard-layer{1,2}.png in docs (Closes: #595295)

 -- Michael Stapelberg <michael@stapelberg.de>  Wed, 03 Nov 2010 20:32:42 +0100

i3-wm (3.e-bf1-2) unstable; urgency=low

  * debian: call dh_installwm to register as alternative for x-window-manager

 -- Michael Stapelberg <michael@stapelberg.de>  Wed, 23 Jun 2010 18:23:10 +0200

i3-wm (3.e-bf1-1) unstable; urgency=low

  * Bugfix: Correctly initialize workspaces if RandR is not available
  * Bugfix: Correctly handle asprintf() return value
  * Bugfix: Update _NET_WM_STATE when clients request changes via ClientMessage
  * Bugfix: Don’t invert directions when resizing floating clients (top/left)
  * Bugfix: Don’t leak file descriptors

 -- Michael Stapelberg <michael@stapelberg.de>  Wed, 09 Jun 2010 09:51:10 +0200

i3-wm (3.e-3) unstable; urgency=low

  * Bump debian policy version
  * Add Recommends: libanyevent-i3-perl, libanyevent-perl, libipc-run-perl
    which are necessary to use i3-wsbar (which is not core functionality,
    thus no Depends:) (Closes: #577287)

 -- Michael Stapelberg <michael@stapelberg.de>  Sat, 24 Apr 2010 11:20:19 +0200

i3-wm (3.e-2) unstable; urgency=low

  * Use x-terminal-emulator instead of hard-coded urxvt

 -- Michael Stapelberg <michael@stapelberg.de>  Sun, 04 Apr 2010 19:30:46 +0200

i3-wm (3.e-1) unstable; urgency=low

  * Implement RandR instead of Xinerama
  * Obey the XDG Base Directory Specification for config file paths
  * lexer/parser: proper error messages
  * Add new options -V for verbose mode and -d <loglevel> for debug log levels
  * Implement resize command for floating clients
  * Include date of the last commit in version string
  * Fixed cursor orientation when resizing
  * Added focus_follows_mouse config option
  * Feature: Cycle through workspaces
  * Fix bindings using the cursor keys in default config
  * added popup for handling SIGSEGV or SIGFPE
  * Correctly exit when another window manager is already running
  * Take into account the window’s base_{width,height} when resizing
  * Disable XKB instead of quitting with an error
  * Make containers containing exactly one window behave like default containers
  * Also warp the pointer when moving a window to a another visible workspace
  * work around clients setting 0xFFFF as resize increments
  * Move autostart after creating the IPC socket in start process
  * Restore geometry of all windows before exiting/restarting
  * When in fullscreen mode, focus whole screens instead of denying to focus
  * draw consistent borders for each frame in a tabbed/stacked container
  * Update fullscreen client position/size when an output changes
  * i3-input: Bugfix: repeatedly grab the keyboard if it does not succeed
  * put windows with WM_CLIENT_LEADER on the workspace of their leader
  * use real functions instead of nested functions (enables compilation with
    llvm-clang)
  * implement screen-spanning fullscreen mode
  * floating resize now uses arbitrary corners
  * floating resize now works proportionally when pressing shift
  * Don’t use SYNC key bindings for mode_switch but re-grab keys
  * support PREFIX and SYSCONFDIR in Makefile
  * make pointer follow the focus when moving to a different screen also for
    floating clients
  * start dock clients on the output they request to be started on according
    to their geometry
  * handle destroy notify events like unmap notify events
  * ewmh: correctly set _NET_CURRENT_DESKTOP to the number of the active
    workspace
  * ewmh: correctly set _NET_ACTIVE_WINDOW
  * ewmh: implement support for _NET_WORKAREA (rdesktop can use that)
  * default ipc-socket path is now ~/.i3/ipc.sock, enabled in the default config
  * Bugfix: Containers could lose their snap state
  * Bugfix: Use ev_loop_new to not block SIGCHLD
  * Bugfix: if a font provides no per-char info for width, fall back to default
  * Bugfix: lexer: return to INITIAL state after floating_modifier
  * Bugfix: Don’t leak IPC socket to launched processes
  * Bugfix: Use both parts of WM_CLASS (it contains instance and class)
  * Bugfix: Correctly do boundary checking/moving to other workspaces when
    moving floating clients via keyboard
  * Bugfix: checked for wrong flag in size hints
  * Bugfix: Correctly render workspace names containing some non-ascii chars
  * Bugfix: Correctly position floating windows sending configure requests
  * Bugfix: Don’t remap stack windows errnously when changing workspaces
  * Bugfix: configure floating windows above tiling windows when moving them
    to another workspace
  * Bugfix: Take window out of fullscreen mode before entering floating mode
  * Bugfix: Don’t enter BIND_A2WS_COND state too early
  * Bugfix: only restore focus if the workspace is focused, not if it is visible
  * Bugfix: numlock state will now be filtered in i3-input and signal handler
  * Bugfix: Don’t unmap windows when current workspace gets reassigned
  * Bugfix: correctly translate coordinates for floating windows when outputs
    change
  * Bugfix: Correctly switch workspace when using the "jump" command
  * Bugfix: Fix rendering of workspace names after "reload"
  * Bugfix: Correctly ignore clicks when in fullscreen mode
  * Bugfix: Don’t allow fullscreen floating windows to be moved
  * Bugfix: Don’t render containers which are not visible on hint changes
  * Some memory leaks/invalid accesses have been fixed

 -- Michael Stapelberg <michael@stapelberg.de>  Tue, 30 Mar 2010 13:11:50 +0200

i3-wm (3.d-bf1-1) unstable; urgency=low

  * Bugfix: Don’t draw window title when titlebar is disabled
  * Bugfix: Correctly switch border types for floating windows
  * Bugfix: Correctly replay pointer if the click handler does not trigger
  * Bugfix: Also allow WORDs as workspace names
  * Bugfix: Correctly clear the urgency hint if a window gets unmapped without
    clearing it
  * Bugfix: Fix resizing of floating windows in borderless/1-px-border mode
  * Bugfix: Accept underscores in bindsym
  * Bugfix: Don’t set the urgency flag if the window is focused
  * Bugfix: Handle stack-limit cols on tabbed containers
  * Bugfix: Resize client after updating base_width/base_height
  * Bugfix: Force render containers after setting the client active
  * Bugfix: Fix two problems in resizing floating windows with right mouse
  * Bugfix: Use more precise floating point arithmetics
  * Bugfix: Correctly place new windows below fullscreen windows

 -- Michael Stapelberg <michael@stapelberg.de>  Mon, 21 Dec 2009 22:33:02 +0100

i3-wm (3.d-2) unstable; urgency=low

  * debian: register in doc-base
  * debian: add watchfile
  * debian: remove unnecessary priority-field from binary packages
  * debian: add missing images to documentation

 -- Michael Stapelberg <michael@stapelberg.de>  Mon, 23 Nov 2009 21:56:04 +0100

i3-wm (3.d-1) unstable; urgency=low

  * Implement tabbing (command "T")
  * Implement horizontal resize of containers (containers! not windows)
  * Implement the urgency hint for windows/workspaces
  * Implement vim-like marks (mark/goto command)
  * Implement stack-limit for further defining how stack windows should look
  * Implement modes which allow you to use a different set of keybindings
    when inside a specific mode
  * Implement changing the default mode of containers
  * Implement long options (--version, --no-autostart, --help, --config)
  * Implement 'bt' to toggle between the different border styles
  * Implement an option to specify the default border style
  * Use a yacc/lex parser/lexer for the configuration file
  * The number of workspaces is now dynamic instead of limited to 10
  * Floating windows (and tiled containers) can now be resized using
    floating_modifier and right mouse button
  * Dock windows can now reconfigure their height
  * Bugfix: Correctly handle multiple messages on the IPC socket
  * Bugfix: Correctly use base_width, base_height and size increment hints
  * Bugfix: Correctly send fake configure_notify events
  * Bugfix: Don’t crash if the numlock symbol cannot be found
  * Bugfix: Don’t display a colon after unnamed workspaces
  * Bugfix: If the pointer is outside of the screen when starting, fall back to
    the first screen.
  * Bugfix: Initialize screens correctly when not using Xinerama
  * Bugfix: Correctly handle unmap_notify events when resizing
  * Bugfix: Correctly warp pointer after rendering the layout
  * Bugfix: Fix NULL pointer dereference when reconfiguring screens
  * Explicitly specify -lxcb when linking (Closes: #554860)

 -- Michael Stapelberg <michael@stapelberg.de>  Mon, 09 Nov 2009 20:53:43 +0100

i3-wm (3.c-2) unstable; urgency=low

  * Fix FTBFS on GNU/kFreeBSD and possibly GNU/Hurd (Closes: #542877)
  * Add manpage for i3-msg

 -- Michael Stapelberg <michael@stapelberg.de>  Mon, 24 Aug 2009 12:23:18 +0200

i3-wm (3.c-1) unstable; urgency=low

  * Implement a reload command
  * Implement keysymbols in configuration file
  * Implement assignments of workspaces to screens
  * Implement named workspaces
  * Implement borderless/1-px-border windows
  * Implement command to focus screens
  * Implement IPC via unix sockets
  * Correctly render decoration of floating windows
  * Map floating windows requesting (0x0) to center of their leader/workspace
  * Optimization: Render stack windows on pixmaps to reduce flickering
  * Optimization: Directly position new windows to their final position
  * Bugfix: Repeatedly try to find screens if none are available
  * Bugfix: Correctly redecorate clients when changing focus
  * Bugfix: Don’t crash when clients reconfigure themselves
  * Bugfix: Fix screen wrapping
  * Bugfix: Fix selecting a different screen with your mouse when not having
    any windows on the current workspace
  * Bugfix: Correctly unmap stack windows and don’t re-map them too early
  * Bugfix: Allow switching layout if there are no clients in the this container
  * Bugfix: Set WM_STATE_WITHDRAWN when unmapping, unmap windows when
    destroying
  * Bugfix: Don’t hide assigned clients to inactive but visible workspaces

 -- Michael Stapelberg <michael@stapelberg.de>  Wed, 19 Aug 2009 13:07:58 +0200

i3-wm (3.b-1) unstable; urgency=low

  * Bugfix: Correctly handle col-/rowspanned containers when setting focus.
  * Bugfix: Correctly handle col-/rowspanned containers when snapping.
  * Bugfix: Force reconfiguration of all windows on workspaces which are
    re-assigned because a screen was detached.
  * Bugfix: Several bugs in resizing table columns fixed.
  * Bugfix: Resizing should now work correctly in all cases.
  * Bugfix: Correctly re-assign dock windows when workspace is destroyed.
  * Bugfix: Correctly handle Mode_switch modifier.
  * Bugfix: Don't raise clients in fullscreen mode.
  * Bugfix: Re-assign dock windows to different workspaces when a workspace
    is detached.
  * Bugfix: Fix crash because of workspace-pointer which did not get updated
  * Bugfix: Correctly initialize screen when Xinerama is disabled.
  * Bugfix: Fullscreen window movement and focus problems fixed
  * Implement jumping to other windows by specifying their position or
    window class/title.
  * Implement jumping back by using the focus stack.
  * Implement autostart (exec-command in configuration file).
  * Implement floating.
  * Implement automatically assigning clients on specific workspaces.
  * Implement variables in configfile.
  * Colors are now configurable.

 -- Michael Stapelberg <michael@stapelberg.de>  Fri, 26 Jun 2009 04:42:23 +0200

i3-wm (3.a-bf2-1) unstable; urgency=low

  * Bugfix: Don't crash when setting focus
  * Bugfix: Reconfigure bar window when changing resolutions

 -- Michael Stapelberg <michael@stapelberg.de>  Sun, 03 May 2009 23:02:24 +0200

i3-wm (3.a-bf1-1) unstable; urgency=low

  * Bugfix: When entering a stack window with the mouse, set focus to the
    active client in the container the stack window belongs to.
  * Bugfix: Correctly filter out the numlock bit. This fixes i3 not reacting
    to any keybindings after pressing numlock once.
  * Bugfix: Don't crash when Xinerama is disabled.
  * Bugfix: Correctly remove client from container when moving to another
    workspace.
  * Bugfix: Set focus to the client which was previously focused instead of
    the next client in container when moving windows out of a container.
  * Bugfix: Correctly set focus when switching between screens.
  * Bugfix: Don't crash anymore moving focus to another screen under the
    following conditions: The screen you switch to has a lower number of cells
    and/or rows than the current one, you switch focus using your mouse, you
    previously were in a column/row which is not available on the destination
    screen.
  * Bugfix: When switching screens, warp the pointer to the correct
    destination window.
  * Bugfix: Store dock clients per screen, not per workspace.
  * Bugfix: Perform bounds checking for snapped containers.
  * Bugfix: Send clients their absolute position/size (on the root window) in
    generated configure events. This fixes problems with xfontsel, xmaple,
    etc.
  * Bugfix: Correctly update state when moving fullscreen windows across
    workspaces.
  * Bugfix: Correctly restart i3 when not using its absolute path
  * Bugfix: Drag & Drop in GTK applications works now
  * Bugfix: Don't hide non-managed windows (libnotify-popups for example)
    when raising clients in stacked containers.
  * Bugfix: Correctly restore focus when leaving fullscreen mode
  * Bugfix: Re-distribute free space when closing customly resized containers,
    re-evaluate for other containers
  * Bugfix: When moving windows into different containers, insert them at the
    correct position.
  * Bugfix: Correctly set focus when moving windows into other containers
  * Implement scrolling on stack windows and on the bottom bar.
  * Create i3-wm-dbg with debug symbols
  * Don't rely on libxcb-wm any longer, as it got removed in libxcb 0.3.4.

 -- Michael Stapelberg <michael@stapelberg.de>  Sat, 02 May 2009 20:55:46 +0200

i3-wm (3.a-1) unstable; urgency=low

  * First release (Closes: #521709)

 -- Michael Stapelberg <michael@stapelberg.de>  Sun, 29 Mar 2009 18:21:30 +0200