travis: check spelling of binaries and manpages, use docker
We now build a docker base container based on debian sid (where the very
latest packages are available). That base container is updated once a
month, or whenever travis-build.Dockerfile or debian/control change, but
re-used for subsequent travis runs. While the initial build might take
up to 15 minutes, subsequent builds typically run in a minute or two.
All the different steps that we run on travis are now factored into
separate scripts in the travis/ directory.
Switching to docker should also help with issue #2174.
Ingo Bürk [Fri, 22 Jan 2016 19:32:51 +0000 (20:32 +0100)]
Don't ignore focus on _NET_WM_DESKTOP client messages.
Ignoring the focus leads to a broken focus if the pointer is, e.g.,
over i3bar at the point in time the window is moved by the client
message. It also causes i3bar's workspace display to break.
Ingo Bürk [Mon, 11 Jan 2016 19:53:26 +0000 (20:53 +0100)]
Handle the EWMH atom _NET_WM_DESKTOP.
We already claim _NET_WM_DESKTOP support in _NET_SUPPORTED since around 2009,
but haven't actually done anything with it. However, especially pagers like
gnome-panel rely on this property to be updated and many tools, like GTK, want
to use the corresponding client messages to make a window sticky, move it
around etc.
This patch implements full support according to the EWMH spec. This means:
* We set the property on all windows when managing it.
* We keep the property updated on all windows at all times.
* We read and respect the property upon managing a window if it was set before
mapping the window.
* We react to client messages for it.
* We remove the property on withdrawn windows.
Note that the special value 0xFFFFFFFF, according to the spec, means that the
window shall be shown on all workspaces. We do this by making it sticky and
float it. This shows it on all workspaces at least on the output it is on.
Furthermore, the spec gives us the freedom to ignore _NET_WM_DESKTOP when
managing a window if we have good reason to. In our case, we give window
swallowing a higher priority since the user would likely expect that and we
want to keep placeholder windows only around for as long as we have to.
However, we do prioritize this property over, for example, startup
notifications.
Theo Buehler [Thu, 14 Jan 2016 09:06:34 +0000 (10:06 +0100)]
Add pledge(2) support for OpenBSD
pledges for i3:
"stdio rpath unix" for talking to the i3 socket usually in /tmp
"proc exec" for executing programs
"wpath cpath" are needed for the restart-in-place functionality
To make this work, @semarie pointed out that it is sufficient to ensure
that we get physical_mem_bytes only once, namely in init_logging().
pledges for i3-msg:
"stdio rpath unix" are needed for talking to the i3-socket
pledges for i3-nagbar
"rpath getpw" to find the home directory
"wpath cpath" to write the script
"proc exec" to execute the script
This disables the default leak-check-on-exit behavior which reports a
bunch of leaks that are only leaks while exiting, at which point they
don’t matter, because the operating system will clean up the memory our
process used.
Ingo Bürk [Wed, 6 Jan 2016 14:19:42 +0000 (09:19 -0500)]
Use correct fallback color for decoration_border.
The newly introduced decoration_border color incorrectly uses the default value
for "background" as a fallback when not specified. Instead, it should use the
user-specified "background" as a fallback.
Ingo Bürk [Sun, 3 Jan 2016 00:11:55 +0000 (19:11 -0500)]
Fix segfault when calling "i3 -C".
Commit 287a0b4 introduced a segfault when validating the i3 config
as the root_screen will not be set in this case, causing a null
pointer dereference.
Ingo Bürk [Tue, 29 Dec 2015 17:01:51 +0000 (12:01 -0500)]
Move title_format from window to container.
This patch moves the title_format information from windows to containers.
Furthermore, it allows correctly setting it on window-less containers and
displays the title accordingly for split containers.
We now also dump and read title_format in GET_TREE / during restarts.
Alex Auvolat [Mon, 28 Dec 2015 11:58:32 +0000 (12:58 +0100)]
get_colorpixel support for non-true color displays
Re-introduce fully-fledged get_colorpixel function, which enables arbitrary
color depths for the display. The previous code is kept as an optimization for
the case of a true color display, where a X11 roundtrip is unnecessary.
Alex Auvolat [Mon, 28 Dec 2015 11:43:53 +0000 (12:43 +0100)]
Correct color management for pango fonts
Corrects the cases where the colorpixel is not 0xRRGGBB : we have to
use the full color_t struct to describe font colors, as Pango expects
RGB values and not an XCB colorpixel value.
Franz Thoma [Mon, 28 Dec 2015 18:38:17 +0000 (19:38 +0100)]
Comply with documentation: 'workspace' token in 'assign' command
According to the User's Guide [1], an `assign` command allows a
`workspace` token after the selector, as an alternative or in addition
to the unicode arrow `→`. In reality, however, the `workspace` token is
not recognized.
Example:
assign [class="Firefox"] workspace "1: Browser"
should assign Firefox windows to workspace `1: Browser`, but the the
browser window appears on a new workspace called
`workspace "1: Browser"` instead.
With this fix, both `→` and `workspace` are recognized (and ignored)
after the selector.
Ingo Bürk [Mon, 28 Dec 2015 03:11:51 +0000 (22:11 -0500)]
Validate matched containers for "kill" command correctly.
We now execute the validations when "kill" is executed even if match
criteria are used. This prevents users from killing workspace containers,
which instead kills all clients (as before when not using criteria).
Ingo Bürk [Mon, 28 Dec 2015 01:58:35 +0000 (20:58 -0500)]
Rename tree_close() to tree_close_internal().
It should be clear for callers of this function that this is an internal
function that skips certain validations which might be important. Therefore
we make it clear that this is an internal function by renaming it.
i3bar: explicitly set cursor using libxcursor if available
Even if the X11 root window cursor is not set up correctly for some
reason, with this fix, users should at least see the correct cursor when
the pointer is over i3bar.
This fixes race conditions, for example when i3bar gets reconfigured
after the available outputs change. In that specific case, i3bar sends a
ConfigureWindow request (see
https://github.com/i3/i3/blob/b5693d6fb33ad29337e4187a2db4a2618ea8fb4c/i3bar/src/xcb.c#L376)
which normally is turned into a ConfigureRequest that i3 largely
ignores, only the dock client’s height is considered (see
https://github.com/i3/i3/blob/b5693d6fb33ad29337e4187a2db4a2618ea8fb4c/src/handlers.c#L390).
Turning ConfigureWindow into ConfigureRequest is only done when the
SubstructureRedirect event mask is set, and because we temporarily
removed _all_ events from our mask, the ConfigureWindow request went
through unmodified.
This in turn lead to the i3bar client window (not its decoration frame)
being positioned at e.g. y=1304, whereas dock client windows should
always end up at x=0 y=0 within their decoration frame. The result of
the i3bar client window being out of the visible space was either a
black i3bar or graphics corruption.
This also fixes issue #1904, I think. I couldn’t reproduce issue #1904
specifically, but when i3bar is in the misconfigured state, it will
receive a VisibilityNotify event, telling i3bar that it is obscured.
This would explain why i3bar sent a SIGSTOP in issue #1904.
Ingo Bürk [Tue, 15 Dec 2015 12:38:56 +0000 (07:38 -0500)]
Match on all criteria even if con_id or con_mark are given.
Previously, if a match specification contained the con_id or con_mark criterion,
all other criteria were ignored. However, a user may want to specify one of
those two unique identifiers and still specify others as well, for example to
match the currently focused window, but only if it has a certain WM_CLASS:
Florian Merkel [Mon, 7 Dec 2015 11:34:24 +0000 (12:34 +0100)]
Support matching _NET_WM_WINDOW_TYPE_NOTIFICATION
This commit fixes #1969 by adding support for matching a window's type
against _NET_WM_WINDOW_TYPE_NOTIFICATION. The userguide and tests were
updated to reflect this change.
projects / i3 / i3 / log