Merge in some such error from main.

diff --git a/Make-common.dist b/Make-common.dist
new file mode 100644 (file)
index 0000000..badfada
--- /dev/null
+++ b/Make-common.dist
@@ -0,0 +1,276 @@
+#-----------------------------------------------------------------------------
+# Copyright 1998 The OpenLDAP Foundation, Redwood City, California, USA
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms are permitted only
+# as authorized by the OpenLDAP Public License.  A copy of this
+# license is available at http://www.OpenLDAP.org/license.html or
+# in file LICENSE in the top-level directory of the distribution.
+# 
+# This work is derived from the University of Michigan LDAP v3.3
+# distribution.  Information concerning is available at
+#      http://www.umich.edu/~dirsvcs/ldap/ldap.html.
+#
+# This work also contains materials derived from public sources.
+#-----------------------------------------------------------------------------
+# Copyright (c) 1994 Regents of the University of Michigan.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms are permitted
+# provided that this notice is preserved and that due credit is given
+# to the University of Michigan at Ann Arbor. The name of the University
+# may not be used to endorse or promote products derived from this
+# software without specific prior written permission. This software
+# is provided ``as is'' without express or implied warranty.
+#-----------------------------------------------------------------------------
+# LDAP common Make defines (included in all but top-level Makefile)
+
+#############################################################################
+## Edit the following variables to have appropriate values for your system ##
+#############################################################################
+
+#
+# Note:  Some make(1) programs do not understand the FOO?=BAR syntax.
+#
+# On such systems, special care should be taken to ensure all variables
+# are properly defined.
+#
+
+#############################################################################
+## LDAP install paths                                                      ##
+#############################################################################
+# by default, everything is installed below INSTROOT
+# config files, etc. are put in ETCDIR
+# include files get put in INCLUDEDIR
+# libraries are put in LIBDIR
+# man pages are put under MANDIR
+# programs end-users will run are put in BINDIR
+# programs sysadmins will run are put in SBINDIR
+# servers are put in LIBEXECDIR
+# pid/args files are put in RUNDIR
+#
+# Per platform defaults override these.
+#
+LDAP_PREFIX?= /usr/local
+LDAP_INSTROOT?= $(LDAP_PREFIX)
+LDAP_ETCDIR?= $(LDAP_INSTROOT)/etc/ldap
+LDAP_INCDIR?= $(LDAP_INSTROOT)/include
+LDAP_LIBDIR?= $(LDAP_INSTROOT)/lib
+LDAP_MANDIR?= $(LDAP_INSTROOT)/man
+LDAP_BINDIR?= $(LDAP_INSTROOT)/bin
+LDAP_SBINDIR?=$(LDAP_INSTROOT)/sbin
+LDAP_LIBEXECDIR?= $(LDAP_INSTROOT)/libexec
+LDAP_RUNDIR?= $(LDAP_ETCDIR)
+
+#############################################################################
+## General compiler options                                                ##
+#############################################################################
+# Passed to every compile (cc or gcc).  This is where you put -O or -g, etc.
+#EXTRACFLAGS=-O -g
+#EXTRACFLAGS=-O
+EXTRACFLAGS?=-g
+# Passed to every link (ld).  Include -g here if you did in EXTRACFLAGS.
+EXTRALDFLAGS?=-g
+
+#############################################################################
+## If you are NOT using Kerberos authentication, you can skip this section.##
+#############################################################################
+#
+# Otherwise, to enable kerberos authentication, uncomment KERBEROS (and
+# AFSKERBEROS if you are running the AFS version of kerberos).  Also
+# uncomment and change the various KRB* lines to point to where the
+# kerberos libraries and include files are installed at your site.
+#
+#KERBEROS=-DKERBEROS
+#AFSKERBEROS=-DAFSKERBEROS
+#KRBINCLUDEFLAG        = -I/usr/local/kerberos/include
+#KRBLIBFLAG    = -L/usr/local/kerberos/lib
+#KRBLIBS               = -lkrb -ldes
+
+#############################################################################
+## ISODE is required ONLY to build the ldap <-> X.500 server (ldapd)       ##
+## If you don't want to build it, you can skip this section.               ##
+#############################################################################
+#
+# To build the ldap server, uncomment the HAVEISODE line,
+# and the section describing build settings for your version of isode.
+#
+#HAVEISODE = yes
+# If you compiled ISODE with TURBO_DISK defined, uncomment this
+#ISODETURBOLIBS        = -lgdbm
+# uncomment these to have ldapd "pretty print" protocol elements w/debugging
+#PEPSY_DUMP=-DPEPSY_DUMP
+#PEPSY=/usr/local/ic/bin/pepsy
+# uncommment this line to have ldapd load PP syntax handlers
+# you'll also need to add -lpp to ISODEBASELIBS below
+#LDAP_USE_PP=-DLDAP_USE_PP
+# uncomment NO_SETPROCTITLE to have ldapd NOT change its title
+#NO_SETPROCTITLE=-DNOSETPROCTITLE
+#
+# ISODE Consortium release build settings
+# You should change the next line so that ICRELEASE matches the (integer)
+# version number of whatever IC release you have, e.g. 1, 2, or 3 and
+# also uncomment the next 5 lines.
+#ICRELEASE=-DICRELEASE=1
+#ISODEPACKAGE=-DISODEPACKAGE=IC
+#ISODEINCLUDEFLAG= -I/usr/local/ic/include/isode -I/usr/local/ic/include
+#ISODELIBFLAG  = -L/usr/local/ic/lib
+#ISODEBASELIBS = -lisode
+#
+# Freely available ISODE 8.0 release build settings (uncomment the next 4 lines)
+#ISODEPACKAGE=-DISODEPACKAGE
+#ISODEINCLUDEFLAG= -I/usr/local/isode/include
+#ISODELIBFLAG  = -L/usr/local/isode/lib
+#ISODEBASELIBS = -ldsap -lisode
+#
+# NEXOR ISODE release build settings (uncomment the next 4 lines)
+#ISODEPACKAGE=-DISODEPACKAGE=XT
+#ISODEINCLUDEFLAG= -I/usr/include/isode
+#ISODELIBFLAG  = -L/usr/local/lib -L/usr/sunlink/osi/lib
+#ISODEBASELIBS = -lxtpp -lresolv -lxtdsap -lxtisode -losi
+
+#############################################################################
+## If you don't want to run slapd, skip this section.                      ##
+#############################################################################
+#
+# To build slapd (the stand-alone ldap daemon), uncomment the MAKESLAPD
+# line and select the SLAPD_BACKENDS you want to use. If you enable the
+# LDBM backend, also select one of the LDBM backends.
+MAKESLAPD= yes
+#
+# remove the defines for backends you don't want to enable 
+SLAPD_BACKENDS= -DLDAP_LDBM -DLDAP_SHELL -DLDAP_PASSWD
+#
+# If you have included -DLDAP_LDBM in the SLAPD_BACKENDS line, 
+# which low-level database package to use must be specified.  You
+# may want to overide the platform settings by disabling the lines
+# below and hardcoding the desired settings.
+#
+# The four choices: Berkeley db b-tree, Berkeley db hash, GNU dbm, or ndbm.
+# You will also need to edit the include and lib strings appropriately.
+# standard unix ndbm
+
+# Fallback settings, defaults are set in build/*/Make-platform
+LDBMBACKEND?=-DLDBM_USE_NDBM
+LDBMINCLUDE?=
+LDBMLIB?=
+
+# LDBM Hardcode Setting Examples (may require editing)
+# berkeley db btree package
+#LDBMLIB=-ldb
+#LDBMBACKEND=-DLDBM_USE_DBBTREE
+#LDBMINCLUDE=-I/usr/local/db/include
+#LDBMLIB?=-ldb
+# berkeley db hash package
+#LDBMBACKEND=-DLDBM_USE_DBHASH
+#LDBMINCLUDE=-I/usr/local/db/include
+#LDBMLIB=-ldb
+# gnu dbm (gdbm)
+#LDBMBACKEND=-DLDBM_USE_GDBM
+#LDBMINCLUDE=-I/usr/local/gdbm/include
+#LDBMLIB=-lgdbm
+
+#undef these if you have SLEEPYCAT DB2 installed
+#LDBMBACKEND=-DLDBM_USE_DBBTREE -DHAVE_SLEEPYCAT_DB2
+#LDBMINCLUDE=-I/usr/local/include
+#LDBMLIB=-L/usr/local/lib -ldb
+
+# if you want to use a non-default threads package change the defines below
+# to one of:
+#      -DPOSIX_THREADS         (draft 10 or standard)
+#      -DTHREAD_MIT_PTHREADS   (draft 4)
+#      -DTHREAD_NEXT_CTHREADS
+#      -DTHREAD_DCE_PTHREADS
+#      -DTHREAD_SUNOS4_LWP
+#      -DTHREAD_SUNOS5_LWP
+# and select the appropriate library.
+#THREADS?=-DNO_THREADS
+#THREADSLIB?=
+
+# Locations of auxilary programs
+# (excepts to below are generally defined in Make-platform)
+LDAP_SENDMAIL?=/usr/lib/sendmail
+LDAP_EDITOR?=/usr/ucb/vi
+LDAP_FINGER?=/usr/ucb/finger
+
+# For generation of compressed man pages
+# (excepts to below are generally defined in Make-platform)
+MANCOMPRESS?=cat
+MANCOMPRESSSUFFIX?=
+
+#############################################################################
+## The following options are used by the xax500 client.  If you haven't    ##
+## retrieved the xax500 source and dropped it into the "clients"           ##
+## directory, you can skip this section.                                   ##
+#############################################################################
+#
+# location of your X include files
+#XINCLUDES= -I/usr/X11/include
+#
+# location of your X libraries
+#XLIBDIRS=-L/usr/X11/lib
+#
+# include any extra X libraries you need here
+# the following works with sunos 4 and X11R5
+#XLIBS = $(XLIBDIRS) -lXm -lXt -lX11
+# the following has been known to work with Solaris 2.4 and X11R6
+#XLIBS = $(XLIBDIRS) -lXm -lXext -lSM -lICE -lXpm -lXt -lX11
+
+#############################################################################
+## If you don't want to do auto-translation of character sets, skip this   ##
+#############################################################################
+#
+# Otherwise, uncomment this line and set the following options.
+#STR_TRANSLATION=-DSTR_TRANSLATION
+# 
+# remove the defines for LDAP client library T.61 character translation
+# you do not need.  If you use LDAP_CHARSET_8859, replace the '1' in "88591"
+# with the number of the particular character set you use.  E.g., use "88594"
+# if you use the ISO 8859-4 chracter set.
+#LIBLDAP_CHARSETS=-DLDAP_CHARSET_8859="88591"
+# 
+# uncomment one these lines to enable automatic T.61 translation by default
+#LIBLDAP_DEF_CHARSET=-DLDAP_DEFAULT_CHARSET=LDAP_CHARSET_8859
+
+#############################################################################
+## General options                                                         ##
+#############################################################################
+# uncomment this line to enable debugging code (a good idea)
+LDAP_DEBUG=-DLDAP_DEBUG
+
+# uncomment this line to turn on a few U of Michigan specific things
+#UOFM=-DUOFM
+
+# uncomment this line to delete a few printfs in the lber and ldap libraries.
+#NO_USERINTERFACE=-DNO_USERINTERFACE
+
+# uncomment this line to include Connectionless LDAP support
+#CLDAP=-DCLDAP
+
+# uncomment this line to eliminate local caching support in the libldap
+#NO_CACHE=-DNO_CACHE
+
+# uncomment this line to do reverse lookups (useful for doing ACLs
+# by host/domain names)
+LDAP_REVERSE_LOOKUP=-DREVERSE_LOOKUP
+
+# uncomment this line to enable support for LDAP referrals in libldap
+LDAP_REFERRALS=-DLDAP_REFERRALS
+
+# uncomment this line to enable ACL by groups
+# LDAP_ACLGROUP=-DACLGROUP
+
+# uncomment these lines to enable support for CRYPT passwords in LDBM.
+# LDAP_CRYPT=-DLDAP_CRYPT
+# LDAP_CRYPT_LIB?=
+# and comment this line out
+LDAP_CRYPT_LIB=
+
+# uncomment these lines to enable support fro tcp_wrappers in servers.
+# Requires tcp_wrappers.
+# LDAP_TCP_WRAPPERS=-DTCP_WRAPPERS -I/usr/local/include
+# LDAP_TCP_WRAPPERS_LIB=-L/usr/local/lib -lwrap
+
+# uncomment this line to use soundex for approximate matches in slapd.
+# the default is to use the metaphone algorithm.
+#PHONETIC=-DSOUNDEX