configure: Add USE_* conditionals for hidapi and libjaylink

[openocd] / README

diff --git a/README b/README
index 8f98e7fac76c8d7e66535976dc18450dc09232b4..792d7e3941925b5da74e5340c72e246a8dd65745 100644 (file)
--- a/README
+++ b/README
@@ -45,9 +45,6 @@ e.g.:
   openocd -f interface/stlink-v2-1.cfg -c "transport select hla_swd" \
           -f target/stm32l0.cfg
 
-NB: when using an FTDI-based adapter you should prefer configs in the
-ftdi directory; the old configs for the ft2232 are deprecated.
-
 After OpenOCD startup, connect GDB with
 
   (gdb) target extended-remote localhost:3333
@@ -119,18 +116,18 @@ Wiggler, XDS100v2, Xverve.
 Debug targets
 -------------
 
-ARM11, ARM7, ARM9, AVR32, Cortex-A, Cortex-R, Cortex-M,
+ARM11, ARM7, ARM9, AVR32, Cortex-A, Cortex-R, Cortex-M, LS102x-SAP,
 Feroceon/Dragonite, DSP563xx, DSP5680xx, FA526, MIPS EJTAG, NDS32,
 XScale, Intel Quark.
 
 Flash drivers
 -------------
 
-ADUC702x, AT91SAM, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, Kinetis,
+ADUC702x, AT91SAM, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, FM4, Kinetis,
 LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, LPCSPIFI, Marvell QSPI,
 Milandr, NIIET, NuMicro, PIC32mx, PSoC4, SiM3x, Stellaris, STM32, STMSMI,
 STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180, LPC32xx,
-i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400, XMC4xxx.
+i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400, XMC1xxx, XMC4xxx.
 
 
 ==================
@@ -184,10 +181,6 @@ suggestions:
   particular hardware;
 - Use "ftdi" interface adapter driver for the FTDI-based devices.
 
-As a PACKAGER, never link against the FTD2XX library, as the resulting
-binaries can't be legally distributed, due to the restrictions of the
-GPL.
-
 
 ================
 Building OpenOCD
@@ -228,11 +221,9 @@ USB-based adapters depend on libusb-1.0 and some older drivers require
 libusb-0.1 or libusb-compat-0.1. A compatible implementation, such as
 FreeBSD's, additionally needs the corresponding .pc files.
 
-USB-Blaster, ASIX Presto, OpenJTAG and ft2232 interface adapter
-drivers need either one of:
+USB-Blaster, ASIX Presto and OpenJTAG interface adapter
+drivers need:
   - libftdi: http://www.intra2net.com/en/developer/libftdi/index.php
-  - ftd2xx: http://www.ftdichip.com/Drivers/D2XX.htm (proprietary,
-    GPL-incompatible)
 
 CMSIS-DAP support needs HIDAPI library.
 
@@ -304,40 +295,6 @@ use both the --enable-parport AND the --enable-parport-giveio option
 if you want to use giveio instead of ioperm parallel port access
 method.
 
-Using FTDI's FTD2XX
--------------------
-
-The (closed source) FTDICHIP.COM solution is faster than libftdi on
-Windows. That is the motivation for supporting it even though its
-licensing restricts it to non-redistributable OpenOCD binaries, and it
-is not available for all operating systems used with OpenOCD. You may,
-however, build such copies for personal use.
-
-The FTDICHIP drivers come as either a (win32) ZIP file, or a (Linux)
-TAR.GZ file. You must unpack them ``some where'' convenient. As of this
-writing FTDICHIP does not supply means to install these files "in an
-appropriate place."
-
-You should use the following ./configure options to make use of
-FTD2XX:
-
-  --with-ftd2xx-win32-zipdir
-                          Where (CYGWIN/MINGW) the zip file from ftdichip.com
-                          was unpacked <default=search>
-  --with-ftd2xx-linux-tardir
-                          Where (Linux/Unix) the tar file from ftdichip.com
-                          was unpacked <default=search>
-  --with-ftd2xx-lib=(static|shared)
-                          Use static or shared ftd2xx libs (default is static)
-
-Remember, this library is binary-only, while OpenOCD is licenced
-according to GNU GPLv2 without any exceptions. That means that
-_distributing_ copies of OpenOCD built with the FTDI code would
-violate the OpenOCD licensing terms.
-
-Note that on Linux there is no good reason to use these FTDI binaries;
-they are no faster (on Linux) than libftdi, and cause licensing issues.
-
 
 ==========================
 Obtaining OpenOCD From GIT