* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
/**
#include "jtag/interface.h"
#include "arm.h"
#include "arm_adi_v5.h"
+#include <helper/jep106.h>
#include <helper/time_support.h>
+#include <helper/list.h>
+#include <helper/jim-nvp.h>
/* ARM ADI Specification requires at least 10 bits used for TAR autoincrement */
* *
***************************************************************************/
-/**
- * Select one of the APs connected to the specified DAP. The
- * selection is implicitly used with future AP transactions.
- * This is a NOP if the specified AP is already selected.
- *
- * @param dap The DAP
- * @param apsel Number of the AP to (implicitly) use with further
- * transactions. This normally identifies a MEM-AP.
- */
-void dap_ap_select(struct adiv5_dap *dap, uint8_t ap)
+static int mem_ap_setup_csw(struct adiv5_ap *ap, uint32_t csw)
{
- uint32_t new_ap = (ap << 24) & 0xFF000000;
+ csw |= ap->csw_default;
- if (new_ap != dap->ap_current) {
- dap->ap_current = new_ap;
- /* Switching AP invalidates cached values.
- * Values MUST BE UPDATED BEFORE AP ACCESS.
- */
- dap->ap_bank_value = -1;
- dap->ap_csw_value = -1;
- dap->ap_tar_value = -1;
+ if (csw != ap->csw_value) {
+ /* LOG_DEBUG("DAP: Set CSW %x",csw); */
+ int retval = dap_queue_ap_write(ap, MEM_AP_REG_CSW, csw);
+ if (retval != ERROR_OK) {
+ ap->csw_value = 0;
+ return retval;
+ }
+ ap->csw_value = csw;
}
+ return ERROR_OK;
}
-static int dap_setup_accessport_csw(struct adiv5_dap *dap, uint32_t csw)
+static int mem_ap_setup_tar(struct adiv5_ap *ap, uint32_t tar)
{
- csw = csw | CSW_DBGSWENABLE | CSW_MASTER_DEBUG | CSW_HPROT |
- dap->apcsw[dap->ap_current >> 24];
-
- if (csw != dap->ap_csw_value) {
- /* LOG_DEBUG("DAP: Set CSW %x",csw); */
- int retval = dap_queue_ap_write(dap, MEM_AP_REG_CSW, csw);
- if (retval != ERROR_OK)
+ if (!ap->tar_valid || tar != ap->tar_value) {
+ /* LOG_DEBUG("DAP: Set TAR %x",tar); */
+ int retval = dap_queue_ap_write(ap, MEM_AP_REG_TAR, tar);
+ if (retval != ERROR_OK) {
+ ap->tar_valid = false;
return retval;
- dap->ap_csw_value = csw;
+ }
+ ap->tar_value = tar;
+ ap->tar_valid = true;
}
return ERROR_OK;
}
-static int dap_setup_accessport_tar(struct adiv5_dap *dap, uint32_t tar)
+static int mem_ap_read_tar(struct adiv5_ap *ap, uint32_t *tar)
{
- if (tar != dap->ap_tar_value || dap->ap_csw_value & CSW_ADDRINC_MASK) {
- /* LOG_DEBUG("DAP: Set TAR %x",tar); */
- int retval = dap_queue_ap_write(dap, MEM_AP_REG_TAR, tar);
- if (retval != ERROR_OK)
- return retval;
- dap->ap_tar_value = tar;
+ int retval = dap_queue_ap_read(ap, MEM_AP_REG_TAR, tar);
+ if (retval != ERROR_OK) {
+ ap->tar_valid = false;
+ return retval;
+ }
+
+ retval = dap_run(ap->dap);
+ if (retval != ERROR_OK) {
+ ap->tar_valid = false;
+ return retval;
}
+
+ ap->tar_value = *tar;
+ ap->tar_valid = true;
return ERROR_OK;
}
+static uint32_t mem_ap_get_tar_increment(struct adiv5_ap *ap)
+{
+ switch (ap->csw_value & CSW_ADDRINC_MASK) {
+ case CSW_ADDRINC_SINGLE:
+ switch (ap->csw_value & CSW_SIZE_MASK) {
+ case CSW_8BIT:
+ return 1;
+ case CSW_16BIT:
+ return 2;
+ case CSW_32BIT:
+ return 4;
+ default:
+ return 0;
+ }
+ case CSW_ADDRINC_PACKED:
+ return 4;
+ }
+ return 0;
+}
+
+/* mem_ap_update_tar_cache is called after an access to MEM_AP_REG_DRW
+ */
+static void mem_ap_update_tar_cache(struct adiv5_ap *ap)
+{
+ if (!ap->tar_valid)
+ return;
+
+ uint32_t inc = mem_ap_get_tar_increment(ap);
+ if (inc >= max_tar_block_size(ap->tar_autoincr_block, ap->tar_value))
+ ap->tar_valid = false;
+ else
+ ap->tar_value += inc;
+}
+
/**
* Queue transactions setting up transfer parameters for the
* currently selected MEM-AP.
* If the CSW is configured for it, the TAR may be automatically
* incremented after each transfer.
*
- * @todo Rename to reflect it being specifically a MEM-AP function.
- *
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP.
* @param csw MEM-AP Control/Status Word (CSW) register to assign. If this
* matches the cached value, the register is not changed.
* @param tar MEM-AP Transfer Address Register (TAR) to assign. If this
*
* @return ERROR_OK if the transaction was properly queued, else a fault code.
*/
-int dap_setup_accessport(struct adiv5_dap *dap, uint32_t csw, uint32_t tar)
+static int mem_ap_setup_transfer(struct adiv5_ap *ap, uint32_t csw, uint32_t tar)
{
int retval;
- retval = dap_setup_accessport_csw(dap, csw);
+ retval = mem_ap_setup_csw(ap, csw);
if (retval != ERROR_OK)
return retval;
- retval = dap_setup_accessport_tar(dap, tar);
+ retval = mem_ap_setup_tar(ap, tar);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
/**
* Asynchronous (queued) read of a word from memory or a system register.
*
- * @param dap The DAP connected to the MEM-AP performing the read.
+ * @param ap The MEM-AP to access.
* @param address Address of the 32-bit word to read; it must be
* readable by the currently selected MEM-AP.
* @param value points to where the word will be stored when the
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
-static int mem_ap_read_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_read_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t *value)
{
int retval;
/* Use banked addressing (REG_BDx) to avoid some link traffic
* (updating TAR) when reading several consecutive addresses.
*/
- retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_OFF,
+ retval = mem_ap_setup_transfer(ap,
+ CSW_32BIT | (ap->csw_value & CSW_ADDRINC_MASK),
address & 0xFFFFFFF0);
if (retval != ERROR_OK)
return retval;
- return dap_queue_ap_read(dap, MEM_AP_REG_BD0 | (address & 0xC), value);
+ return dap_queue_ap_read(ap, MEM_AP_REG_BD0 | (address & 0xC), value);
}
/**
* Synchronous read of a word from memory or a system register.
* As a side effect, this flushes any queued transactions.
*
- * @param dap The DAP connected to the MEM-AP performing the read.
+ * @param ap The MEM-AP to access.
* @param address Address of the 32-bit word to read; it must be
* readable by the currently selected MEM-AP.
* @param value points to where the result will be stored.
* @return ERROR_OK for success; *value holds the result.
* Otherwise a fault code.
*/
-static int mem_ap_read_atomic_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_read_atomic_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t *value)
{
int retval;
- retval = mem_ap_read_u32(dap, address, value);
+ retval = mem_ap_read_u32(ap, address, value);
if (retval != ERROR_OK)
return retval;
- return dap_run(dap);
+ return dap_run(ap->dap);
}
/**
* Asynchronous (queued) write of a word to memory or a system register.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param address Address to be written; it must be writable by
* the currently selected MEM-AP.
* @param value Word that will be written to the address when transaction
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
-static int mem_ap_write_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_write_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t value)
{
int retval;
/* Use banked addressing (REG_BDx) to avoid some link traffic
* (updating TAR) when writing several consecutive addresses.
*/
- retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_OFF,
+ retval = mem_ap_setup_transfer(ap,
+ CSW_32BIT | (ap->csw_value & CSW_ADDRINC_MASK),
address & 0xFFFFFFF0);
if (retval != ERROR_OK)
return retval;
- return dap_queue_ap_write(dap, MEM_AP_REG_BD0 | (address & 0xC),
+ return dap_queue_ap_write(ap, MEM_AP_REG_BD0 | (address & 0xC),
value);
}
* Synchronous write of a word to memory or a system register.
* As a side effect, this flushes any queued transactions.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param address Address to be written; it must be writable by
* the currently selected MEM-AP.
* @param value Word that will be written.
*
* @return ERROR_OK for success; the data was written. Otherwise a fault code.
*/
-static int mem_ap_write_atomic_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_write_atomic_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t value)
{
- int retval = mem_ap_write_u32(dap, address, value);
+ int retval = mem_ap_write_u32(ap, address, value);
if (retval != ERROR_OK)
return retval;
- return dap_run(dap);
+ return dap_run(ap->dap);
}
/**
* Synchronous write of a block of memory, using a specific access size.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param buffer The data buffer to write. No particular alignment is assumed.
* @param size Which access size to use, in bytes. 1, 2 or 4.
* @param count The number of writes to do (in size units, not bytes).
* should normally be true, except when writing to e.g. a FIFO.
* @return ERROR_OK on success, otherwise an error code.
*/
-static int mem_ap_write(struct adiv5_dap *dap, const uint8_t *buffer, uint32_t size, uint32_t count,
+static int mem_ap_write(struct adiv5_ap *ap, const uint8_t *buffer, uint32_t size, uint32_t count,
uint32_t address, bool addrinc)
{
+ struct adiv5_dap *dap = ap->dap;
size_t nbytes = size * count;
const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
uint32_t csw_size;
uint32_t addr_xor;
- int retval;
+ int retval = ERROR_OK;
/* TI BE-32 Quirks mode:
* Writes on big-endian TMS570 behave very strangely. Observed behavior:
return ERROR_TARGET_UNALIGNED_ACCESS;
}
- if (dap->unaligned_access_bad && (address % size != 0))
+ if (ap->unaligned_access_bad && (address % size != 0))
return ERROR_TARGET_UNALIGNED_ACCESS;
- retval = dap_setup_accessport_tar(dap, address ^ addr_xor);
- if (retval != ERROR_OK)
- return retval;
-
while (nbytes > 0) {
uint32_t this_size = size;
/* Select packed transfer if possible */
- if (addrinc && dap->packed_transfers && nbytes >= 4
- && max_tar_block_size(dap->tar_autoincr_block, address) >= 4) {
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
this_size = 4;
- retval = dap_setup_accessport_csw(dap, csw_size | CSW_ADDRINC_PACKED);
+ retval = mem_ap_setup_csw(ap, csw_size | CSW_ADDRINC_PACKED);
} else {
- retval = dap_setup_accessport_csw(dap, csw_size | csw_addrincr);
+ retval = mem_ap_setup_csw(ap, csw_size | csw_addrincr);
}
if (retval != ERROR_OK)
break;
+ retval = mem_ap_setup_tar(ap, address ^ addr_xor);
+ if (retval != ERROR_OK)
+ return retval;
+
/* How many source bytes each transfer will consume, and their location in the DRW,
* depends on the type of transfer and alignment. See ARM document IHI0031C. */
uint32_t outvalue = 0;
+ uint32_t drw_byte_idx = address;
if (dap->ti_be_32_quirks) {
switch (this_size) {
case 4:
- outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (address++ & 3) ^ addr_xor);
- outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (address++ & 3) ^ addr_xor);
- outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (address++ & 3) ^ addr_xor);
- outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (address++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx & 3) ^ addr_xor);
break;
case 2:
- outvalue |= (uint32_t)*buffer++ << 8 * (1 ^ (address++ & 3) ^ addr_xor);
- outvalue |= (uint32_t)*buffer++ << 8 * (1 ^ (address++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (1 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (1 ^ (drw_byte_idx & 3) ^ addr_xor);
break;
case 1:
- outvalue |= (uint32_t)*buffer++ << 8 * (0 ^ (address++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (0 ^ (drw_byte_idx & 3) ^ addr_xor);
break;
}
} else {
switch (this_size) {
case 4:
- outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
- outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx++ & 3);
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx++ & 3);
+ /* fallthrough */
case 2:
- outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx++ & 3);
+ /* fallthrough */
case 1:
- outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx & 3);
}
}
nbytes -= this_size;
- retval = dap_queue_ap_write(dap, MEM_AP_REG_DRW, outvalue);
+ retval = dap_queue_ap_write(ap, MEM_AP_REG_DRW, outvalue);
if (retval != ERROR_OK)
break;
- /* Rewrite TAR if it wrapped or we're xoring addresses */
- if (addrinc && (addr_xor || (address % dap->tar_autoincr_block < size && nbytes > 0))) {
- retval = dap_setup_accessport_tar(dap, address ^ addr_xor);
- if (retval != ERROR_OK)
- break;
- }
+ mem_ap_update_tar_cache(ap);
+ if (addrinc)
+ address += this_size;
}
/* REVISIT: Might want to have a queued version of this function that does not run. */
if (retval != ERROR_OK) {
uint32_t tar;
- if (dap_queue_ap_read(dap, MEM_AP_REG_TAR, &tar) == ERROR_OK
- && dap_run(dap) == ERROR_OK)
+ if (mem_ap_read_tar(ap, &tar) == ERROR_OK)
LOG_ERROR("Failed to write memory at 0x%08"PRIx32, tar);
else
LOG_ERROR("Failed to write memory and, additionally, failed to find out where");
/**
* Synchronous read of a block of memory, using a specific access size.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param buffer The data buffer to receive the data. No particular alignment is assumed.
* @param size Which access size to use, in bytes. 1, 2 or 4.
* @param count The number of reads to do (in size units, not bytes).
* should normally be true, except when reading from e.g. a FIFO.
* @return ERROR_OK on success, otherwise an error code.
*/
-static int mem_ap_read(struct adiv5_dap *dap, uint8_t *buffer, uint32_t size, uint32_t count,
+static int mem_ap_read(struct adiv5_ap *ap, uint8_t *buffer, uint32_t size, uint32_t count,
uint32_t adr, bool addrinc)
{
+ struct adiv5_dap *dap = ap->dap;
size_t nbytes = size * count;
const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
uint32_t csw_size;
uint32_t address = adr;
- int retval;
+ int retval = ERROR_OK;
/* TI BE-32 Quirks mode:
* Reads on big-endian TMS570 behave strangely differently than writes.
else
return ERROR_TARGET_UNALIGNED_ACCESS;
- if (dap->unaligned_access_bad && (adr % size != 0))
+ if (ap->unaligned_access_bad && (adr % size != 0))
return ERROR_TARGET_UNALIGNED_ACCESS;
/* Allocate buffer to hold the sequence of DRW reads that will be made. This is a significant
* over-allocation if packed transfers are going to be used, but determining the real need at
* this point would be messy. */
- uint32_t *read_buf = malloc(count * sizeof(uint32_t));
+ uint32_t *read_buf = calloc(count, sizeof(uint32_t));
+ /* Multiplication count * sizeof(uint32_t) may overflow, calloc() is safe */
uint32_t *read_ptr = read_buf;
if (read_buf == NULL) {
LOG_ERROR("Failed to allocate read buffer");
return ERROR_FAIL;
}
- retval = dap_setup_accessport_tar(dap, address);
- if (retval != ERROR_OK) {
- free(read_buf);
- return retval;
- }
-
/* Queue up all reads. Each read will store the entire DRW word in the read buffer. How many
* useful bytes it contains, and their location in the word, depends on the type of transfer
* and alignment. */
uint32_t this_size = size;
/* Select packed transfer if possible */
- if (addrinc && dap->packed_transfers && nbytes >= 4
- && max_tar_block_size(dap->tar_autoincr_block, address) >= 4) {
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
this_size = 4;
- retval = dap_setup_accessport_csw(dap, csw_size | CSW_ADDRINC_PACKED);
+ retval = mem_ap_setup_csw(ap, csw_size | CSW_ADDRINC_PACKED);
} else {
- retval = dap_setup_accessport_csw(dap, csw_size | csw_addrincr);
+ retval = mem_ap_setup_csw(ap, csw_size | csw_addrincr);
}
if (retval != ERROR_OK)
break;
- retval = dap_queue_ap_read(dap, MEM_AP_REG_DRW, read_ptr++);
+ retval = mem_ap_setup_tar(ap, address);
+ if (retval != ERROR_OK)
+ break;
+
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_DRW, read_ptr++);
if (retval != ERROR_OK)
break;
nbytes -= this_size;
- address += this_size;
+ if (addrinc)
+ address += this_size;
- /* Rewrite TAR if it wrapped */
- if (addrinc && address % dap->tar_autoincr_block < size && nbytes > 0) {
- retval = dap_setup_accessport_tar(dap, address);
- if (retval != ERROR_OK)
- break;
- }
+ mem_ap_update_tar_cache(ap);
}
if (retval == ERROR_OK)
* at least give the caller what we have. */
if (retval != ERROR_OK) {
uint32_t tar;
- if (dap_queue_ap_read(dap, MEM_AP_REG_TAR, &tar) == ERROR_OK
- && dap_run(dap) == ERROR_OK) {
+ if (mem_ap_read_tar(ap, &tar) == ERROR_OK) {
+ /* TAR is incremented after failed transfer on some devices (eg Cortex-M4) */
LOG_ERROR("Failed to read memory at 0x%08"PRIx32, tar);
if (nbytes > tar - address)
nbytes = tar - address;
while (nbytes > 0) {
uint32_t this_size = size;
- if (addrinc && dap->packed_transfers && nbytes >= 4
- && max_tar_block_size(dap->tar_autoincr_block, address) >= 4) {
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
this_size = 4;
}
case 4:
*buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
*buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
+ /* fallthrough */
case 2:
*buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
+ /* fallthrough */
case 1:
*buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
}
case 4:
*buffer++ = *read_ptr >> 8 * (address++ & 3);
*buffer++ = *read_ptr >> 8 * (address++ & 3);
+ /* fallthrough */
case 2:
*buffer++ = *read_ptr >> 8 * (address++ & 3);
+ /* fallthrough */
case 1:
*buffer++ = *read_ptr >> 8 * (address++ & 3);
}
return retval;
}
-/*--------------------------------------------------------------------*/
-/* Wrapping function with selection of AP */
-/*--------------------------------------------------------------------*/
-int mem_ap_sel_read_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t *value)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_u32(swjdp, address, value);
-}
-
-int mem_ap_sel_write_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t value)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_u32(swjdp, address, value);
-}
-
-int mem_ap_sel_read_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t *value)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_atomic_u32(swjdp, address, value);
-}
-
-int mem_ap_sel_write_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t value)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_atomic_u32(swjdp, address, value);
-}
-
-int mem_ap_sel_read_buf(struct adiv5_dap *swjdp, uint8_t ap,
+int mem_ap_read_buf(struct adiv5_ap *ap,
uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_read(swjdp, buffer, size, count, address, true);
+ return mem_ap_read(ap, buffer, size, count, address, true);
}
-int mem_ap_sel_write_buf(struct adiv5_dap *swjdp, uint8_t ap,
+int mem_ap_write_buf(struct adiv5_ap *ap,
const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_write(swjdp, buffer, size, count, address, true);
+ return mem_ap_write(ap, buffer, size, count, address, true);
}
-int mem_ap_sel_read_buf_noincr(struct adiv5_dap *swjdp, uint8_t ap,
+int mem_ap_read_buf_noincr(struct adiv5_ap *ap,
uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_read(swjdp, buffer, size, count, address, false);
+ return mem_ap_read(ap, buffer, size, count, address, false);
}
-int mem_ap_sel_write_buf_noincr(struct adiv5_dap *swjdp, uint8_t ap,
+int mem_ap_write_buf_noincr(struct adiv5_ap *ap,
const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_write(swjdp, buffer, size, count, address, false);
+ return mem_ap_write(ap, buffer, size, count, address, false);
}
/*--------------------------------------------------------------------------*/
#define DAP_POWER_DOMAIN_TIMEOUT (10)
-/* FIXME don't import ... just initialize as
- * part of DAP transport setup
-*/
-extern const struct dap_ops jtag_dp_ops;
-
/*--------------------------------------------------------------------------*/
+/**
+ * Invalidate cached DP select and cached TAR and CSW of all APs
+ */
+void dap_invalidate_cache(struct adiv5_dap *dap)
+{
+ dap->select = DP_SELECT_INVALID;
+ dap->last_read = NULL;
+
+ int i;
+ for (i = 0; i <= 255; i++) {
+ /* force csw and tar write on the next mem-ap access */
+ dap->ap[i].tar_valid = false;
+ dap->ap[i].csw_value = 0;
+ }
+}
+
/**
* Initialize a DAP. This sets up the power domains, prepares the DP
- * for further use, and arranges to use AP #0 for all AP operations
- * until dap_ap-select() changes that policy.
+ * for further use and activates overrun checking.
*
* @param dap The DAP being initialized.
- *
- * @todo Rename this. We also need an initialization scheme which account
- * for SWD transports not just JTAG; that will need to address differences
- * in layering. (JTAG is useful without any debug target; but not SWD.)
- * And this may not even use an AHB-AP ... e.g. DAP-Lite uses an APB-AP.
*/
-int ahbap_debugport_init(struct adiv5_dap *dap, uint8_t apsel)
+int dap_dp_init(struct adiv5_dap *dap)
{
- /* check that we support packed transfers */
- uint32_t csw, cfg;
int retval;
- LOG_DEBUG(" ");
+ LOG_DEBUG("%s", adiv5_dap_name(dap));
- /* JTAG-DP or SWJ-DP, in JTAG mode
- * ... for SWD mode this is patched as part
- * of link switchover
- */
- if (!dap->ops)
- dap->ops = &jtag_dp_ops;
+ dap_invalidate_cache(dap);
- /* Default MEM-AP setup.
- *
- * REVISIT AP #0 may be an inappropriate default for this.
- * Should we probe, or take a hint from the caller?
- * Presumably we can ignore the possibility of multiple APs.
- */
- dap->ap_current = -1;
- dap_ap_select(dap, apsel);
- dap->last_read = NULL;
-
- for (size_t i = 0; i < 10; i++) {
+ for (size_t i = 0; i < 30; i++) {
/* DP initialization */
- dap->dp_bank_value = 0;
-
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- continue;
+ retval = dap_dp_read_atomic(dap, DP_CTRL_STAT, NULL);
+ if (retval == ERROR_OK)
+ break;
+ }
- retval = dap_queue_dp_write(dap, DP_CTRL_STAT, SSTICKYERR);
- if (retval != ERROR_OK)
- continue;
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, SSTICKYERR);
+ if (retval != ERROR_OK)
+ return retval;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- continue;
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ return retval;
- dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
- retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
- if (retval != ERROR_OK)
- continue;
+ dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
+ if (retval != ERROR_OK)
+ return retval;
- /* Check that we have debug power domains activated */
- LOG_DEBUG("DAP: wait CDBGPWRUPACK");
- retval = dap_dp_poll_register(dap, DP_CTRL_STAT,
- CDBGPWRUPACK, CDBGPWRUPACK,
- DAP_POWER_DOMAIN_TIMEOUT);
- if (retval != ERROR_OK)
- continue;
+ /* Check that we have debug power domains activated */
+ LOG_DEBUG("DAP: wait CDBGPWRUPACK");
+ retval = dap_dp_poll_register(dap, DP_CTRL_STAT,
+ CDBGPWRUPACK, CDBGPWRUPACK,
+ DAP_POWER_DOMAIN_TIMEOUT);
+ if (retval != ERROR_OK)
+ return retval;
+ if (!dap->ignore_syspwrupack) {
LOG_DEBUG("DAP: wait CSYSPWRUPACK");
retval = dap_dp_poll_register(dap, DP_CTRL_STAT,
CSYSPWRUPACK, CSYSPWRUPACK,
DAP_POWER_DOMAIN_TIMEOUT);
if (retval != ERROR_OK)
- continue;
+ return retval;
+ }
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- continue;
- /* With debug power on we can activate OVERRUN checking */
- dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
- retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
- if (retval != ERROR_OK)
- continue;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- continue;
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ return retval;
- retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_PACKED, 0);
- if (retval != ERROR_OK)
- continue;
+ /* With debug power on we can activate OVERRUN checking */
+ dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ return retval;
- retval = dap_queue_ap_read(dap, MEM_AP_REG_CSW, &csw);
- if (retval != ERROR_OK)
- continue;
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
+ return retval;
- retval = dap_queue_ap_read(dap, MEM_AP_REG_CFG, &cfg);
- if (retval != ERROR_OK)
- continue;
+ return retval;
+}
- retval = dap_run(dap);
- if (retval != ERROR_OK)
- continue;
+/**
+ * Initialize a DAP. This sets up the power domains, prepares the DP
+ * for further use, and arranges to use AP #0 for all AP operations
+ * until dap_ap-select() changes that policy.
+ *
+ * @param ap The MEM-AP being initialized.
+ */
+int mem_ap_init(struct adiv5_ap *ap)
+{
+ /* check that we support packed transfers */
+ uint32_t csw, cfg;
+ int retval;
+ struct adiv5_dap *dap = ap->dap;
- break;
- }
+ ap->tar_valid = false;
+ ap->csw_value = 0; /* force csw and tar write */
+ retval = mem_ap_setup_transfer(ap, CSW_8BIT | CSW_ADDRINC_PACKED, 0);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_CSW, &csw);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_CFG, &cfg);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;
if (csw & CSW_ADDRINC_PACKED)
- dap->packed_transfers = true;
+ ap->packed_transfers = true;
else
- dap->packed_transfers = false;
+ ap->packed_transfers = false;
/* Packed transfers on TI BE-32 processors do not work correctly in
* many cases. */
if (dap->ti_be_32_quirks)
- dap->packed_transfers = false;
+ ap->packed_transfers = false;
LOG_DEBUG("MEM_AP Packed Transfers: %s",
- dap->packed_transfers ? "enabled" : "disabled");
+ ap->packed_transfers ? "enabled" : "disabled");
/* The ARM ADI spec leaves implementation-defined whether unaligned
* memory accesses work, only work partially, or cause a sticky error.
* and unaligned writes seem to cause a sticky error.
* TODO: it would be nice to have a way to detect whether unaligned
* operations are supported on other processors. */
- dap->unaligned_access_bad = dap->ti_be_32_quirks;
+ ap->unaligned_access_bad = dap->ti_be_32_quirks;
LOG_DEBUG("MEM_AP CFG: large data %d, long address %d, big-endian %d",
!!(cfg & 0x04), !!(cfg & 0x02), !!(cfg & 0x01));
"Generic IP component", "PrimeCell or System component"
};
-static bool is_dap_cid_ok(uint32_t cid3, uint32_t cid2, uint32_t cid1, uint32_t cid0)
+static bool is_dap_cid_ok(uint32_t cid)
{
- return cid3 == 0xb1 && cid2 == 0x05
- && ((cid1 & 0x0f) == 0) && cid0 == 0x0d;
+ return (cid & 0xffff0fff) == 0xb105000d;
}
/*
* This function checks the ID for each access port to find the requested Access Port type
*/
-int dap_find_ap(struct adiv5_dap *dap, enum ap_type type_to_find, uint8_t *ap_num_out)
+int dap_find_ap(struct adiv5_dap *dap, enum ap_type type_to_find, struct adiv5_ap **ap_out)
{
- int ap;
+ int ap_num;
/* Maximum AP number is 255 since the SELECT register is 8 bits */
- for (ap = 0; ap <= 255; ap++) {
+ for (ap_num = 0; ap_num <= 255; ap_num++) {
/* read the IDR register of the Access Port */
uint32_t id_val = 0;
- dap_ap_select(dap, ap);
- int retval = dap_queue_ap_read(dap, AP_REG_IDR, &id_val);
+ int retval = dap_queue_ap_read(dap_ap(dap, ap_num), AP_REG_IDR, &id_val);
if (retval != ERROR_OK)
return retval;
* 31-28 : Revision
* 27-24 : JEDEC bank (0x4 for ARM)
* 23-17 : JEDEC code (0x3B for ARM)
- * 16 : Mem-AP
- * 15-8 : Reserved
- * 7-0 : AP Identity (1=AHB-AP 2=APB-AP 0x10=JTAG-AP)
+ * 16-13 : Class (0b1000=Mem-AP)
+ * 12-8 : Reserved
+ * 7-4 : AP Variant (non-zero for JTAG-AP)
+ * 3-0 : AP Type (0=JTAG-AP 1=AHB-AP 2=APB-AP 4=AXI-AP)
*/
/* Reading register for a non-existant AP should not cause an error,
* but just to be sure, try to continue searching if an error does happen.
*/
if ((retval == ERROR_OK) && /* Register read success */
- ((id_val & 0x0FFF0000) == 0x04770000) && /* Jedec codes match */
- ((id_val & 0xFF) == type_to_find)) { /* type matches*/
+ ((id_val & IDR_JEP106) == IDR_JEP106_ARM) && /* Jedec codes match */
+ ((id_val & IDR_TYPE) == type_to_find)) { /* type matches*/
LOG_DEBUG("Found %s at AP index: %d (IDR=0x%08" PRIX32 ")",
(type_to_find == AP_TYPE_AHB_AP) ? "AHB-AP" :
(type_to_find == AP_TYPE_APB_AP) ? "APB-AP" :
+ (type_to_find == AP_TYPE_AXI_AP) ? "AXI-AP" :
(type_to_find == AP_TYPE_JTAG_AP) ? "JTAG-AP" : "Unknown",
- ap, id_val);
+ ap_num, id_val);
- *ap_num_out = ap;
+ *ap_out = &dap->ap[ap_num];
return ERROR_OK;
}
}
LOG_DEBUG("No %s found",
(type_to_find == AP_TYPE_AHB_AP) ? "AHB-AP" :
(type_to_find == AP_TYPE_APB_AP) ? "APB-AP" :
+ (type_to_find == AP_TYPE_AXI_AP) ? "AXI-AP" :
(type_to_find == AP_TYPE_JTAG_AP) ? "JTAG-AP" : "Unknown");
return ERROR_FAIL;
}
-int dap_get_debugbase(struct adiv5_dap *dap, int ap,
+int dap_get_debugbase(struct adiv5_ap *ap,
uint32_t *dbgbase, uint32_t *apid)
{
- uint32_t ap_old;
+ struct adiv5_dap *dap = ap->dap;
int retval;
- /* AP address is in bits 31:24 of DP_SELECT */
- if (ap >= 256)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- ap_old = dap_ap_get_select(dap);
- dap_ap_select(dap, ap);
-
- retval = dap_queue_ap_read(dap, MEM_AP_REG_BASE, dbgbase);
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE, dbgbase);
if (retval != ERROR_OK)
return retval;
- retval = dap_queue_ap_read(dap, AP_REG_IDR, apid);
+ retval = dap_queue_ap_read(ap, AP_REG_IDR, apid);
if (retval != ERROR_OK)
return retval;
retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;
- dap_ap_select(dap, ap_old);
-
return ERROR_OK;
}
-int dap_lookup_cs_component(struct adiv5_dap *dap, int ap,
+int dap_lookup_cs_component(struct adiv5_ap *ap,
uint32_t dbgbase, uint8_t type, uint32_t *addr, int32_t *idx)
{
- uint32_t ap_old;
uint32_t romentry, entry_offset = 0, component_base, devtype;
int retval;
- if (ap >= 256)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
*addr = 0;
- ap_old = dap_ap_get_select(dap);
- dap_ap_select(dap, ap);
do {
- retval = mem_ap_read_atomic_u32(dap, (dbgbase&0xFFFFF000) |
+ retval = mem_ap_read_atomic_u32(ap, (dbgbase&0xFFFFF000) |
entry_offset, &romentry);
if (retval != ERROR_OK)
return retval;
if (romentry & 0x1) {
uint32_t c_cid1;
- retval = mem_ap_read_atomic_u32(dap, component_base | 0xff4, &c_cid1);
+ retval = mem_ap_read_atomic_u32(ap, component_base | 0xff4, &c_cid1);
if (retval != ERROR_OK) {
LOG_ERROR("Can't read component with base address 0x%" PRIx32
", the corresponding core might be turned off", component_base);
return retval;
}
if (((c_cid1 >> 4) & 0x0f) == 1) {
- retval = dap_lookup_cs_component(dap, ap, component_base,
+ retval = dap_lookup_cs_component(ap, component_base,
type, addr, idx);
if (retval == ERROR_OK)
break;
return retval;
}
- retval = mem_ap_read_atomic_u32(dap,
+ retval = mem_ap_read_atomic_u32(ap,
(component_base & 0xfffff000) | 0xfcc,
&devtype);
if (retval != ERROR_OK)
entry_offset += 4;
} while (romentry > 0);
- dap_ap_select(dap, ap_old);
-
if (!*addr)
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
return ERROR_OK;
}
-static int dap_rom_display(struct command_context *cmd_ctx,
- struct adiv5_dap *dap, int ap, uint32_t dbgbase, int depth)
+static int dap_read_part_id(struct adiv5_ap *ap, uint32_t component_base, uint32_t *cid, uint64_t *pid)
{
- int retval;
- uint32_t cid0, cid1, cid2, cid3, memtype, romentry;
- uint16_t entry_offset;
- char tabs[7] = "";
+ assert((component_base & 0xFFF) == 0);
+ assert(ap != NULL && cid != NULL && pid != NULL);
- if (depth > 16) {
- command_print(cmd_ctx, "\tTables too deep");
- return ERROR_FAIL;
- }
-
- if (depth)
- snprintf(tabs, sizeof(tabs), "[L%02d] ", depth);
-
- /* bit 16 of apid indicates a memory access port */
- if (dbgbase & 0x02)
- command_print(cmd_ctx, "\t%sValid ROM table present", tabs);
- else
- command_print(cmd_ctx, "\t%sROM table in legacy format", tabs);
+ uint32_t cid0, cid1, cid2, cid3;
+ uint32_t pid0, pid1, pid2, pid3, pid4;
+ int retval;
- /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF0, &cid0);
+ /* IDs are in last 4K section */
+ retval = mem_ap_read_u32(ap, component_base + 0xFE0, &pid0);
if (retval != ERROR_OK)
return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF4, &cid1);
+ retval = mem_ap_read_u32(ap, component_base + 0xFE4, &pid1);
if (retval != ERROR_OK)
return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF8, &cid2);
+ retval = mem_ap_read_u32(ap, component_base + 0xFE8, &pid2);
if (retval != ERROR_OK)
return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFFC, &cid3);
+ retval = mem_ap_read_u32(ap, component_base + 0xFEC, &pid3);
if (retval != ERROR_OK)
return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFCC, &memtype);
+ retval = mem_ap_read_u32(ap, component_base + 0xFD0, &pid4);
if (retval != ERROR_OK)
return retval;
- retval = dap_run(dap);
+ retval = mem_ap_read_u32(ap, component_base + 0xFF0, &cid0);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + 0xFF4, &cid1);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + 0xFF8, &cid2);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + 0xFFC, &cid3);
if (retval != ERROR_OK)
return retval;
- if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
- command_print(cmd_ctx, "\t%sCID3 0x%02x"
- ", CID2 0x%02x"
- ", CID1 0x%02x"
- ", CID0 0x%02x",
- tabs,
- (unsigned)cid3, (unsigned)cid2,
- (unsigned)cid1, (unsigned)cid0);
- if (memtype & 0x01)
- command_print(cmd_ctx, "\t%sMEMTYPE system memory present on bus", tabs);
- else
- command_print(cmd_ctx, "\t%sMEMTYPE system memory not present: dedicated debug bus", tabs);
+ retval = dap_run(ap->dap);
+ if (retval != ERROR_OK)
+ return retval;
+
+ *cid = (cid3 & 0xff) << 24
+ | (cid2 & 0xff) << 16
+ | (cid1 & 0xff) << 8
+ | (cid0 & 0xff);
+ *pid = (uint64_t)(pid4 & 0xff) << 32
+ | (pid3 & 0xff) << 24
+ | (pid2 & 0xff) << 16
+ | (pid1 & 0xff) << 8
+ | (pid0 & 0xff);
+
+ return ERROR_OK;
+}
+
+/* The designer identity code is encoded as:
+ * bits 11:8 : JEP106 Bank (number of continuation codes), only valid when bit 7 is 1.
+ * bit 7 : Set when bits 6:0 represent a JEP106 ID and cleared when bits 6:0 represent
+ * a legacy ASCII Identity Code.
+ * bits 6:0 : JEP106 Identity Code (without parity) or legacy ASCII code according to bit 7.
+ * JEP106 is a standard available from jedec.org
+ */
+
+/* Part number interpretations are from Cortex
+ * core specs, the CoreSight components TRM
+ * (ARM DDI 0314H), CoreSight System Design
+ * Guide (ARM DGI 0012D) and ETM specs; also
+ * from chip observation (e.g. TI SDTI).
+ */
+
+/* The legacy code only used the part number field to identify CoreSight peripherals.
+ * This meant that the same part number from two different manufacturers looked the same.
+ * It is desirable for all future additions to identify with both part number and JEP106.
+ * "ANY_ID" is a wildcard (any JEP106) only to preserve legacy behavior for legacy entries.
+ */
+
+#define ANY_ID 0x1000
+
+#define ARM_ID 0x4BB
+
+static const struct {
+ uint16_t designer_id;
+ uint16_t part_num;
+ const char *type;
+ const char *full;
+} dap_partnums[] = {
+ { ARM_ID, 0x000, "Cortex-M3 SCS", "(System Control Space)", },
+ { ARM_ID, 0x001, "Cortex-M3 ITM", "(Instrumentation Trace Module)", },
+ { ARM_ID, 0x002, "Cortex-M3 DWT", "(Data Watchpoint and Trace)", },
+ { ARM_ID, 0x003, "Cortex-M3 FPB", "(Flash Patch and Breakpoint)", },
+ { ARM_ID, 0x008, "Cortex-M0 SCS", "(System Control Space)", },
+ { ARM_ID, 0x00a, "Cortex-M0 DWT", "(Data Watchpoint and Trace)", },
+ { ARM_ID, 0x00b, "Cortex-M0 BPU", "(Breakpoint Unit)", },
+ { ARM_ID, 0x00c, "Cortex-M4 SCS", "(System Control Space)", },
+ { ARM_ID, 0x00d, "CoreSight ETM11", "(Embedded Trace)", },
+ { ARM_ID, 0x00e, "Cortex-M7 FPB", "(Flash Patch and Breakpoint)", },
+ { ARM_ID, 0x490, "Cortex-A15 GIC", "(Generic Interrupt Controller)", },
+ { ARM_ID, 0x4a1, "Cortex-A53 ROM", "(v8 Memory Map ROM Table)", },
+ { ARM_ID, 0x4a2, "Cortex-A57 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4a3, "Cortex-A53 ROM", "(v7 Memory Map ROM Table)", },
+ { ARM_ID, 0x4a4, "Cortex-A72 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4a9, "Cortex-A9 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4af, "Cortex-A15 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c0, "Cortex-M0+ ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c3, "Cortex-M3 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c4, "Cortex-M4 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c7, "Cortex-M7 PPB ROM", "(Private Peripheral Bus ROM Table)", },
+ { ARM_ID, 0x4c8, "Cortex-M7 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4b5, "Cortex-R5 ROM", "(ROM Table)", },
+ { ARM_ID, 0x470, "Cortex-M1 ROM", "(ROM Table)", },
+ { ARM_ID, 0x471, "Cortex-M0 ROM", "(ROM Table)", },
+ { ARM_ID, 0x906, "CoreSight CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x907, "CoreSight ETB", "(Trace Buffer)", },
+ { ARM_ID, 0x908, "CoreSight CSTF", "(Trace Funnel)", },
+ { ARM_ID, 0x909, "CoreSight ATBR", "(Advanced Trace Bus Replicator)", },
+ { ARM_ID, 0x910, "CoreSight ETM9", "(Embedded Trace)", },
+ { ARM_ID, 0x912, "CoreSight TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x913, "CoreSight ITM", "(Instrumentation Trace Macrocell)", },
+ { ARM_ID, 0x914, "CoreSight SWO", "(Single Wire Output)", },
+ { ARM_ID, 0x917, "CoreSight HTM", "(AHB Trace Macrocell)", },
+ { ARM_ID, 0x920, "CoreSight ETM11", "(Embedded Trace)", },
+ { ARM_ID, 0x921, "Cortex-A8 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x922, "Cortex-A8 CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x923, "Cortex-M3 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x924, "Cortex-M3 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x925, "Cortex-M4 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x930, "Cortex-R4 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x931, "Cortex-R5 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x932, "CoreSight MTB-M0+", "(Micro Trace Buffer)", },
+ { ARM_ID, 0x941, "CoreSight TPIU-Lite", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x950, "Cortex-A9 PTM", "(Program Trace Macrocell)", },
+ { ARM_ID, 0x955, "Cortex-A5 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95a, "Cortex-A72 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95b, "Cortex-A17 PTM", "(Program Trace Macrocell)", },
+ { ARM_ID, 0x95d, "Cortex-A53 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95e, "Cortex-A57 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95f, "Cortex-A15 PTM", "(Program Trace Macrocell)", },
+ { ARM_ID, 0x961, "CoreSight TMC", "(Trace Memory Controller)", },
+ { ARM_ID, 0x962, "CoreSight STM", "(System Trace Macrocell)", },
+ { ARM_ID, 0x975, "Cortex-M7 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x9a0, "CoreSight PMU", "(Performance Monitoring Unit)", },
+ { ARM_ID, 0x9a1, "Cortex-M4 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x9a4, "CoreSight GPR", "(Granular Power Requester)", },
+ { ARM_ID, 0x9a5, "Cortex-A5 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9a7, "Cortex-A7 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9a8, "Cortex-A53 CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x9a9, "Cortex-M7 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x9ae, "Cortex-A17 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9af, "Cortex-A15 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9b7, "Cortex-R7 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9d3, "Cortex-A53 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9d7, "Cortex-A57 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9d8, "Cortex-A72 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0xc05, "Cortex-A5 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc07, "Cortex-A7 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc08, "Cortex-A8 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc09, "Cortex-A9 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc0e, "Cortex-A17 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc0f, "Cortex-A15 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc14, "Cortex-R4 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc15, "Cortex-R5 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc17, "Cortex-R7 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd03, "Cortex-A53 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd07, "Cortex-A57 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd08, "Cortex-A72 Debug", "(Debug Unit)", },
+ { 0x097, 0x9af, "MSP432 ROM", "(ROM Table)" },
+ { 0x09f, 0xcd0, "Atmel CPU with DSU", "(CPU)" },
+ { 0x0c1, 0x1db, "XMC4500 ROM", "(ROM Table)" },
+ { 0x0c1, 0x1df, "XMC4700/4800 ROM", "(ROM Table)" },
+ { 0x0c1, 0x1ed, "XMC1000 ROM", "(ROM Table)" },
+ { 0x0E5, 0x000, "SHARC+/Blackfin+", "", },
+ { 0x0F0, 0x440, "Qualcomm QDSS Component v1", "(Qualcomm Designed CoreSight Component v1)", },
+ { 0x3eb, 0x181, "Tegra 186 ROM", "(ROM Table)", },
+ { 0x3eb, 0x211, "Tegra 210 ROM", "(ROM Table)", },
+ { 0x3eb, 0x202, "Denver ETM", "(Denver Embedded Trace)", },
+ { 0x3eb, 0x302, "Denver Debug", "(Debug Unit)", },
+ { 0x3eb, 0x402, "Denver PMU", "(Performance Monitor Unit)", },
+ /* legacy comment: 0x113: what? */
+ { ANY_ID, 0x120, "TI SDTI", "(System Debug Trace Interface)", }, /* from OMAP3 memmap */
+ { ANY_ID, 0x343, "TI DAPCTL", "", }, /* from OMAP3 memmap */
+};
+
+static int dap_rom_display(struct command_context *cmd_ctx,
+ struct adiv5_ap *ap, uint32_t dbgbase, int depth)
+{
+ int retval;
+ uint64_t pid;
+ uint32_t cid;
+ char tabs[16] = "";
+
+ if (depth > 16) {
+ command_print(cmd_ctx, "\tTables too deep");
+ return ERROR_FAIL;
+ }
+
+ if (depth)
+ snprintf(tabs, sizeof(tabs), "[L%02d] ", depth);
+
+ uint32_t base_addr = dbgbase & 0xFFFFF000;
+ command_print(cmd_ctx, "\t\tComponent base address 0x%08" PRIx32, base_addr);
+
+ retval = dap_read_part_id(ap, base_addr, &cid, &pid);
+ if (retval != ERROR_OK) {
+ command_print(cmd_ctx, "\t\tCan't read component, the corresponding core might be turned off");
+ return ERROR_OK; /* Don't abort recursion */
+ }
+
+ if (!is_dap_cid_ok(cid)) {
+ command_print(cmd_ctx, "\t\tInvalid CID 0x%08" PRIx32, cid);
+ return ERROR_OK; /* Don't abort recursion */
+ }
+
+ /* component may take multiple 4K pages */
+ uint32_t size = (pid >> 36) & 0xf;
+ if (size > 0)
+ command_print(cmd_ctx, "\t\tStart address 0x%08" PRIx32, (uint32_t)(base_addr - 0x1000 * size));
+
+ command_print(cmd_ctx, "\t\tPeripheral ID 0x%010" PRIx64, pid);
+
+ uint8_t class = (cid >> 12) & 0xf;
+ uint16_t part_num = pid & 0xfff;
+ uint16_t designer_id = ((pid >> 32) & 0xf) << 8 | ((pid >> 12) & 0xff);
+
+ if (designer_id & 0x80) {
+ /* JEP106 code */
+ command_print(cmd_ctx, "\t\tDesigner is 0x%03" PRIx16 ", %s",
+ designer_id, jep106_manufacturer(designer_id >> 8, designer_id & 0x7f));
+ } else {
+ /* Legacy ASCII ID, clear invalid bits */
+ designer_id &= 0x7f;
+ command_print(cmd_ctx, "\t\tDesigner ASCII code 0x%02" PRIx16 ", %s",
+ designer_id, designer_id == 0x41 ? "ARM" : "<unknown>");
+ }
+
+ /* default values to be overwritten upon finding a match */
+ const char *type = "Unrecognized";
+ const char *full = "";
+
+ /* search dap_partnums[] array for a match */
+ for (unsigned entry = 0; entry < ARRAY_SIZE(dap_partnums); entry++) {
+
+ if ((dap_partnums[entry].designer_id != designer_id) && (dap_partnums[entry].designer_id != ANY_ID))
+ continue;
+
+ if (dap_partnums[entry].part_num != part_num)
+ continue;
+
+ type = dap_partnums[entry].type;
+ full = dap_partnums[entry].full;
+ break;
+ }
- /* Now we read ROM table entries from dbgbase&0xFFFFF000) | 0x000 until we get 0x00000000 */
- for (entry_offset = 0; ; entry_offset += 4) {
- retval = mem_ap_read_atomic_u32(dap, (dbgbase&0xFFFFF000) | entry_offset, &romentry);
+ command_print(cmd_ctx, "\t\tPart is 0x%" PRIx16", %s %s", part_num, type, full);
+ command_print(cmd_ctx, "\t\tComponent class is 0x%" PRIx8 ", %s", class, class_description[class]);
+
+ if (class == 1) { /* ROM Table */
+ uint32_t memtype;
+ retval = mem_ap_read_atomic_u32(ap, base_addr | 0xFCC, &memtype);
if (retval != ERROR_OK)
return retval;
- command_print(cmd_ctx, "\t%sROMTABLE[0x%x] = 0x%" PRIx32 "",
- tabs, entry_offset, romentry);
- if (romentry & 0x01) {
- uint32_t c_cid0, c_cid1, c_cid2, c_cid3;
- uint32_t c_pid0, c_pid1, c_pid2, c_pid3, c_pid4;
- uint32_t component_base;
- uint32_t part_num;
- const char *type, *full;
-
- component_base = (dbgbase & 0xFFFFF000) + (romentry & 0xFFFFF000);
-
- /* IDs are in last 4K section */
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFE0, &c_pid0);
- if (retval != ERROR_OK) {
- command_print(cmd_ctx, "\t%s\tCan't read component with base address 0x%" PRIx32
- ", the corresponding core might be turned off", tabs, component_base);
- continue;
- }
- c_pid0 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFE4, &c_pid1);
- if (retval != ERROR_OK)
- return retval;
- c_pid1 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFE8, &c_pid2);
- if (retval != ERROR_OK)
- return retval;
- c_pid2 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFEC, &c_pid3);
- if (retval != ERROR_OK)
- return retval;
- c_pid3 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFD0, &c_pid4);
- if (retval != ERROR_OK)
- return retval;
- c_pid4 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFF0, &c_cid0);
- if (retval != ERROR_OK)
- return retval;
- c_cid0 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFF4, &c_cid1);
- if (retval != ERROR_OK)
- return retval;
- c_cid1 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFF8, &c_cid2);
- if (retval != ERROR_OK)
- return retval;
- c_cid2 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFFC, &c_cid3);
+ if (memtype & 0x01)
+ command_print(cmd_ctx, "\t\tMEMTYPE system memory present on bus");
+ else
+ command_print(cmd_ctx, "\t\tMEMTYPE system memory not present: dedicated debug bus");
+
+ /* Read ROM table entries from base address until we get 0x00000000 or reach the reserved area */
+ for (uint16_t entry_offset = 0; entry_offset < 0xF00; entry_offset += 4) {
+ uint32_t romentry;
+ retval = mem_ap_read_atomic_u32(ap, base_addr | entry_offset, &romentry);
if (retval != ERROR_OK)
return retval;
- c_cid3 &= 0xff;
-
- command_print(cmd_ctx, "\t\tComponent base address 0x%" PRIx32 ", "
- "start address 0x%" PRIx32, component_base,
- /* component may take multiple 4K pages */
- (uint32_t)(component_base - 0x1000*(c_pid4 >> 4)));
- command_print(cmd_ctx, "\t\tComponent class is 0x%" PRIx8 ", %s",
- (uint8_t)((c_cid1 >> 4) & 0xf),
- /* See ARM IHI 0029B Table 3-3 */
- class_description[(c_cid1 >> 4) & 0xf]);
-
- /* CoreSight component? */
- if (((c_cid1 >> 4) & 0x0f) == 9) {
- uint32_t devtype;
- unsigned minor;
- const char *major = "Reserved", *subtype = "Reserved";
-
- retval = mem_ap_read_atomic_u32(dap,
- (component_base & 0xfffff000) | 0xfcc,
- &devtype);
+ command_print(cmd_ctx, "\t%sROMTABLE[0x%x] = 0x%" PRIx32 "",
+ tabs, entry_offset, romentry);
+ if (romentry & 0x01) {
+ /* Recurse */
+ retval = dap_rom_display(cmd_ctx, ap, base_addr + (romentry & 0xFFFFF000), depth + 1);
if (retval != ERROR_OK)
return retval;
- minor = (devtype >> 4) & 0x0f;
- switch (devtype & 0x0f) {
- case 0:
- major = "Miscellaneous";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 4:
- subtype = "Validation component";
- break;
- }
- break;
- case 1:
- major = "Trace Sink";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Port";
- break;
- case 2:
- subtype = "Buffer";
- break;
- case 3:
- subtype = "Router";
- break;
- }
- break;
- case 2:
- major = "Trace Link";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Funnel, router";
- break;
- case 2:
- subtype = "Filter";
- break;
- case 3:
- subtype = "FIFO, buffer";
- break;
- }
- break;
- case 3:
- major = "Trace Source";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Processor";
- break;
- case 2:
- subtype = "DSP";
- break;
- case 3:
- subtype = "Engine/Coprocessor";
- break;
- case 4:
- subtype = "Bus";
- break;
- case 6:
- subtype = "Software";
- break;
- }
- break;
- case 4:
- major = "Debug Control";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Trigger Matrix";
- break;
- case 2:
- subtype = "Debug Auth";
- break;
- case 3:
- subtype = "Power Requestor";
- break;
- }
- break;
- case 5:
- major = "Debug Logic";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Processor";
- break;
- case 2:
- subtype = "DSP";
- break;
- case 3:
- subtype = "Engine/Coprocessor";
- break;
- case 4:
- subtype = "Bus";
- break;
- case 5:
- subtype = "Memory";
- break;
- }
- break;
- case 6:
- major = "Perfomance Monitor";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Processor";
- break;
- case 2:
- subtype = "DSP";
- break;
- case 3:
- subtype = "Engine/Coprocessor";
- break;
- case 4:
- subtype = "Bus";
- break;
- case 5:
- subtype = "Memory";
- break;
- }
- break;
- }
- command_print(cmd_ctx, "\t\tType is 0x%02" PRIx8 ", %s, %s",
- (uint8_t)(devtype & 0xff),
- major, subtype);
- /* REVISIT also show 0xfc8 DevId */
+ } else if (romentry != 0) {
+ command_print(cmd_ctx, "\t\tComponent not present");
+ } else {
+ command_print(cmd_ctx, "\t%s\tEnd of ROM table", tabs);
+ break;
}
+ }
+ } else if (class == 9) { /* CoreSight component */
+ const char *major = "Reserved", *subtype = "Reserved";
- if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
- command_print(cmd_ctx,
- "\t\tCID3 0%02x"
- ", CID2 0%02x"
- ", CID1 0%02x"
- ", CID0 0%02x",
- (int)c_cid3,
- (int)c_cid2,
- (int)c_cid1,
- (int)c_cid0);
- command_print(cmd_ctx,
- "\t\tPeripheral ID[4..0] = hex "
- "%02x %02x %02x %02x %02x",
- (int)c_pid4, (int)c_pid3, (int)c_pid2,
- (int)c_pid1, (int)c_pid0);
-
- /* Part number interpretations are from Cortex
- * core specs, the CoreSight components TRM
- * (ARM DDI 0314H), CoreSight System Design
- * Guide (ARM DGI 0012D) and ETM specs; also
- * from chip observation (e.g. TI SDTI).
- */
- part_num = (c_pid0 & 0xff);
- part_num |= (c_pid1 & 0x0f) << 8;
- switch (part_num) {
- case 0x000:
- type = "Cortex-M3 NVIC";
- full = "(Interrupt Controller)";
- break;
- case 0x001:
- type = "Cortex-M3 ITM";
- full = "(Instrumentation Trace Module)";
- break;
- case 0x002:
- type = "Cortex-M3 DWT";
- full = "(Data Watchpoint and Trace)";
- break;
- case 0x003:
- type = "Cortex-M3 FBP";
- full = "(Flash Patch and Breakpoint)";
- break;
- case 0x008:
- type = "Cortex-M0 SCS";
- full = "(System Control Space)";
- break;
- case 0x00a:
- type = "Cortex-M0 DWT";
- full = "(Data Watchpoint and Trace)";
+ uint32_t devtype;
+ retval = mem_ap_read_atomic_u32(ap, base_addr | 0xFCC, &devtype);
+ if (retval != ERROR_OK)
+ return retval;
+ unsigned minor = (devtype >> 4) & 0x0f;
+ switch (devtype & 0x0f) {
+ case 0:
+ major = "Miscellaneous";
+ switch (minor) {
+ case 0:
+ subtype = "other";
break;
- case 0x00b:
- type = "Cortex-M0 BPU";
- full = "(Breakpoint Unit)";
+ case 4:
+ subtype = "Validation component";
break;
- case 0x00c:
- type = "Cortex-M4 SCS";
- full = "(System Control Space)";
+ }
+ break;
+ case 1:
+ major = "Trace Sink";
+ switch (minor) {
+ case 0:
+ subtype = "other";
break;
- case 0x00d:
- type = "CoreSight ETM11";
- full = "(Embedded Trace)";
+ case 1:
+ subtype = "Port";
break;
- /* case 0x113: what? */
- case 0x120: /* from OMAP3 memmap */
- type = "TI SDTI";
- full = "(System Debug Trace Interface)";
+ case 2:
+ subtype = "Buffer";
break;
- case 0x343: /* from OMAP3 memmap */
- type = "TI DAPCTL";
- full = "";
+ case 3:
+ subtype = "Router";
break;
- case 0x906:
- type = "Coresight CTI";
- full = "(Cross Trigger)";
+ }
+ break;
+ case 2:
+ major = "Trace Link";
+ switch (minor) {
+ case 0:
+ subtype = "other";
break;
- case 0x907:
- type = "Coresight ETB";
- full = "(Trace Buffer)";
+ case 1:
+ subtype = "Funnel, router";
break;
- case 0x908:
- type = "Coresight CSTF";
- full = "(Trace Funnel)";
+ case 2:
+ subtype = "Filter";
break;
- case 0x910:
- type = "CoreSight ETM9";
- full = "(Embedded Trace)";
+ case 3:
+ subtype = "FIFO, buffer";
break;
- case 0x912:
- type = "Coresight TPIU";
- full = "(Trace Port Interface Unit)";
+ }
+ break;
+ case 3:
+ major = "Trace Source";
+ switch (minor) {
+ case 0:
+ subtype = "other";
break;
- case 0x913:
- type = "Coresight ITM";
- full = "(Instrumentation Trace Macrocell)";
+ case 1:
+ subtype = "Processor";
break;
- case 0x914:
- type = "Coresight SWO";
- full = "(Single Wire Output)";
+ case 2:
+ subtype = "DSP";
break;
- case 0x917:
- type = "Coresight HTM";
- full = "(AHB Trace Macrocell)";
+ case 3:
+ subtype = "Engine/Coprocessor";
break;
- case 0x920:
- type = "CoreSight ETM11";
- full = "(Embedded Trace)";
+ case 4:
+ subtype = "Bus";
break;
- case 0x921:
- type = "Cortex-A8 ETM";
- full = "(Embedded Trace)";
+ case 6:
+ subtype = "Software";
break;
- case 0x922:
- type = "Cortex-A8 CTI";
- full = "(Cross Trigger)";
+ }
+ break;
+ case 4:
+ major = "Debug Control";
+ switch (minor) {
+ case 0:
+ subtype = "other";
break;
- case 0x923:
- type = "Cortex-M3 TPIU";
- full = "(Trace Port Interface Unit)";
+ case 1:
+ subtype = "Trigger Matrix";
break;
- case 0x924:
- type = "Cortex-M3 ETM";
- full = "(Embedded Trace)";
+ case 2:
+ subtype = "Debug Auth";
break;
- case 0x925:
- type = "Cortex-M4 ETM";
- full = "(Embedded Trace)";
+ case 3:
+ subtype = "Power Requestor";
break;
- case 0x930:
- type = "Cortex-R4 ETM";
- full = "(Embedded Trace)";
+ }
+ break;
+ case 5:
+ major = "Debug Logic";
+ switch (minor) {
+ case 0:
+ subtype = "other";
break;
- case 0x950:
- type = "CoreSight Component";
- full = "(unidentified Cortex-A9 component)";
+ case 1:
+ subtype = "Processor";
break;
- case 0x961:
- type = "CoreSight TMC";
- full = "(Trace Memory Controller)";
+ case 2:
+ subtype = "DSP";
break;
- case 0x962:
- type = "CoreSight STM";
- full = "(System Trace Macrocell)";
+ case 3:
+ subtype = "Engine/Coprocessor";
break;
- case 0x9a0:
- type = "CoreSight PMU";
- full = "(Performance Monitoring Unit)";
+ case 4:
+ subtype = "Bus";
break;
- case 0x9a1:
- type = "Cortex-M4 TPUI";
- full = "(Trace Port Interface Unit)";
+ case 5:
+ subtype = "Memory";
break;
- case 0x9a5:
- type = "Cortex-A5 ETM";
- full = "(Embedded Trace)";
+ }
+ break;
+ case 6:
+ major = "Perfomance Monitor";
+ switch (minor) {
+ case 0:
+ subtype = "other";
break;
- case 0xc05:
- type = "Cortex-A5 Debug";
- full = "(Debug Unit)";
+ case 1:
+ subtype = "Processor";
break;
- case 0xc08:
- type = "Cortex-A8 Debug";
- full = "(Debug Unit)";
+ case 2:
+ subtype = "DSP";
break;
- case 0xc09:
- type = "Cortex-A9 Debug";
- full = "(Debug Unit)";
+ case 3:
+ subtype = "Engine/Coprocessor";
break;
- case 0x4af:
- type = "Cortex-A15 Debug";
- full = "(Debug Unit)";
+ case 4:
+ subtype = "Bus";
break;
- default:
- LOG_DEBUG("Unrecognized Part number 0x%" PRIx32, part_num);
- type = "-*- unrecognized -*-";
- full = "";
+ case 5:
+ subtype = "Memory";
break;
}
- command_print(cmd_ctx, "\t\tPart is %s %s",
- type, full);
-
- /* ROM Table? */
- if (((c_cid1 >> 4) & 0x0f) == 1) {
- retval = dap_rom_display(cmd_ctx, dap, ap, component_base, depth + 1);
- if (retval != ERROR_OK)
- return retval;
- }
- } else {
- if (romentry)
- command_print(cmd_ctx, "\t\tComponent not present");
- else
- break;
+ break;
}
+ command_print(cmd_ctx, "\t\tType is 0x%02" PRIx8 ", %s, %s",
+ (uint8_t)(devtype & 0xff),
+ major, subtype);
+ /* REVISIT also show 0xfc8 DevId */
}
- command_print(cmd_ctx, "\t%s\tEnd of ROM table", tabs);
+
return ERROR_OK;
}
-static int dap_info_command(struct command_context *cmd_ctx,
- struct adiv5_dap *dap, int ap)
+int dap_info_command(struct command_context *cmd_ctx,
+ struct adiv5_ap *ap)
{
int retval;
uint32_t dbgbase, apid;
- int romtable_present = 0;
uint8_t mem_ap;
- uint32_t ap_old;
- retval = dap_get_debugbase(dap, ap, &dbgbase, &apid);
+ /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
+ retval = dap_get_debugbase(ap, &dbgbase, &apid);
if (retval != ERROR_OK)
return retval;
- ap_old = dap_ap_get_select(dap);
- dap_ap_select(dap, ap);
-
- /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
- mem_ap = ((apid&0x10000) && ((apid&0x0F) != 0));
command_print(cmd_ctx, "AP ID register 0x%8.8" PRIx32, apid);
- if (apid) {
- switch (apid&0x0F) {
- case 0:
- command_print(cmd_ctx, "\tType is JTAG-AP");
- break;
- case 1:
- command_print(cmd_ctx, "\tType is MEM-AP AHB");
- break;
- case 2:
- command_print(cmd_ctx, "\tType is MEM-AP APB");
- break;
- default:
- command_print(cmd_ctx, "\tUnknown AP type");
- break;
+ if (apid == 0) {
+ command_print(cmd_ctx, "No AP found at this ap 0x%x", ap->ap_num);
+ return ERROR_FAIL;
+ }
+
+ switch (apid & (IDR_JEP106 | IDR_TYPE)) {
+ case IDR_JEP106_ARM | AP_TYPE_JTAG_AP:
+ command_print(cmd_ctx, "\tType is JTAG-AP");
+ break;
+ case IDR_JEP106_ARM | AP_TYPE_AHB_AP:
+ command_print(cmd_ctx, "\tType is MEM-AP AHB");
+ break;
+ case IDR_JEP106_ARM | AP_TYPE_APB_AP:
+ command_print(cmd_ctx, "\tType is MEM-AP APB");
+ break;
+ case IDR_JEP106_ARM | AP_TYPE_AXI_AP:
+ command_print(cmd_ctx, "\tType is MEM-AP AXI");
+ break;
+ default:
+ command_print(cmd_ctx, "\tUnknown AP type");
+ break;
+ }
+
+ /* NOTE: a MEM-AP may have a single CoreSight component that's
+ * not a ROM table ... or have no such components at all.
+ */
+ mem_ap = (apid & IDR_CLASS) == AP_CLASS_MEM_AP;
+ if (mem_ap) {
+ command_print(cmd_ctx, "MEM-AP BASE 0x%8.8" PRIx32, dbgbase);
+
+ if (dbgbase == 0xFFFFFFFF || (dbgbase & 0x3) == 0x2) {
+ command_print(cmd_ctx, "\tNo ROM table present");
+ } else {
+ if (dbgbase & 0x01)
+ command_print(cmd_ctx, "\tValid ROM table present");
+ else
+ command_print(cmd_ctx, "\tROM table in legacy format");
+
+ dap_rom_display(cmd_ctx, ap, dbgbase & 0xFFFFF000, 0);
}
+ }
- /* NOTE: a MEM-AP may have a single CoreSight component that's
- * not a ROM table ... or have no such components at all.
- */
- if (mem_ap)
- command_print(cmd_ctx, "AP BASE 0x%8.8" PRIx32, dbgbase);
- } else
- command_print(cmd_ctx, "No AP found at this ap 0x%x", ap);
-
- romtable_present = ((mem_ap) && (dbgbase != 0xFFFFFFFF));
- if (romtable_present)
- dap_rom_display(cmd_ctx, dap, ap, dbgbase, 0);
- else
- command_print(cmd_ctx, "\tNo ROM table present");
- dap_ap_select(dap, ap_old);
+ return ERROR_OK;
+}
+
+enum adiv5_cfg_param {
+ CFG_DAP,
+ CFG_AP_NUM
+};
+
+static const Jim_Nvp nvp_config_opts[] = {
+ { .name = "-dap", .value = CFG_DAP },
+ { .name = "-ap-num", .value = CFG_AP_NUM },
+ { .name = NULL, .value = -1 }
+};
+
+int adiv5_jim_configure(struct target *target, Jim_GetOptInfo *goi)
+{
+ struct adiv5_private_config *pc;
+ int e;
+
+ pc = (struct adiv5_private_config *)target->private_config;
+ if (pc == NULL) {
+ pc = calloc(1, sizeof(struct adiv5_private_config));
+ pc->ap_num = -1;
+ target->private_config = pc;
+ }
+
+ target->has_dap = true;
+
+ if (goi->argc > 0) {
+ Jim_Nvp *n;
+
+ Jim_SetEmptyResult(goi->interp);
+
+ /* check first if topmost item is for us */
+ e = Jim_Nvp_name2value_obj(goi->interp, nvp_config_opts,
+ goi->argv[0], &n);
+ if (e != JIM_OK)
+ return JIM_CONTINUE;
+
+ e = Jim_GetOpt_Obj(goi, NULL);
+ if (e != JIM_OK)
+ return e;
+
+ switch (n->value) {
+ case CFG_DAP:
+ if (goi->isconfigure) {
+ Jim_Obj *o_t;
+ struct adiv5_dap *dap;
+ e = Jim_GetOpt_Obj(goi, &o_t);
+ if (e != JIM_OK)
+ return e;
+ dap = dap_instance_by_jim_obj(goi->interp, o_t);
+ if (dap == NULL) {
+ Jim_SetResultString(goi->interp, "DAP name invalid!", -1);
+ return JIM_ERR;
+ }
+ if (pc->dap != NULL && pc->dap != dap) {
+ Jim_SetResultString(goi->interp,
+ "DAP assignment cannot be changed after target was created!", -1);
+ return JIM_ERR;
+ }
+ if (target->tap_configured) {
+ Jim_SetResultString(goi->interp,
+ "-chain-position and -dap configparams are mutually exclusive!", -1);
+ return JIM_ERR;
+ }
+ pc->dap = dap;
+ target->tap = dap->tap;
+ target->dap_configured = true;
+ } else {
+ if (goi->argc != 0) {
+ Jim_WrongNumArgs(goi->interp,
+ goi->argc, goi->argv,
+ "NO PARAMS");
+ return JIM_ERR;
+ }
+
+ if (pc->dap == NULL) {
+ Jim_SetResultString(goi->interp, "DAP not configured", -1);
+ return JIM_ERR;
+ }
+ Jim_SetResultString(goi->interp, adiv5_dap_name(pc->dap), -1);
+ }
+ break;
+
+ case CFG_AP_NUM:
+ if (goi->isconfigure) {
+ jim_wide ap_num;
+ e = Jim_GetOpt_Wide(goi, &ap_num);
+ if (e != JIM_OK)
+ return e;
+ pc->ap_num = ap_num;
+ } else {
+ if (goi->argc != 0) {
+ Jim_WrongNumArgs(goi->interp,
+ goi->argc, goi->argv,
+ "NO PARAMS");
+ return JIM_ERR;
+ }
+
+ if (pc->ap_num < 0) {
+ Jim_SetResultString(goi->interp, "AP number not configured", -1);
+ return JIM_ERR;
+ }
+ Jim_SetResult(goi->interp, Jim_NewIntObj(goi->interp, (int)pc->ap_num));
+ }
+ break;
+ }
+ }
+
+ return JIM_OK;
+}
+
+int adiv5_verify_config(struct adiv5_private_config *pc)
+{
+ if (pc == NULL)
+ return ERROR_FAIL;
+
+ if (pc->dap == NULL)
+ return ERROR_FAIL;
return ERROR_OK;
}
+
COMMAND_HANDLER(handle_dap_info_command)
{
- struct target *target = get_current_target(CMD_CTX);
- struct arm *arm = target_to_arm(target);
- struct adiv5_dap *dap = arm->dap;
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
uint32_t apsel;
switch (CMD_ARGC) {
break;
case 1:
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
+ if (apsel >= 256)
+ return ERROR_COMMAND_SYNTAX_ERROR;
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- return dap_info_command(CMD_CTX, dap, apsel);
+ return dap_info_command(CMD_CTX, &dap->ap[apsel]);
}
COMMAND_HANDLER(dap_baseaddr_command)
{
- struct target *target = get_current_target(CMD_CTX);
- struct arm *arm = target_to_arm(target);
- struct adiv5_dap *dap = arm->dap;
-
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
uint32_t apsel, baseaddr;
int retval;
return ERROR_COMMAND_SYNTAX_ERROR;
}
- dap_ap_select(dap, apsel);
-
/* NOTE: assumes we're talking to a MEM-AP, which
* has a base address. There are other kinds of AP,
* though they're not common for now. This should
* use the ID register to verify it's a MEM-AP.
*/
- retval = dap_queue_ap_read(dap, MEM_AP_REG_BASE, &baseaddr);
+ retval = dap_queue_ap_read(dap_ap(dap, apsel), MEM_AP_REG_BASE, &baseaddr);
if (retval != ERROR_OK)
return retval;
retval = dap_run(dap);
COMMAND_HANDLER(dap_memaccess_command)
{
- struct target *target = get_current_target(CMD_CTX);
- struct arm *arm = target_to_arm(target);
- struct adiv5_dap *dap = arm->dap;
-
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
uint32_t memaccess_tck;
switch (CMD_ARGC) {
case 0:
- memaccess_tck = dap->memaccess_tck;
+ memaccess_tck = dap->ap[dap->apsel].memaccess_tck;
break;
case 1:
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], memaccess_tck);
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- dap->memaccess_tck = memaccess_tck;
+ dap->ap[dap->apsel].memaccess_tck = memaccess_tck;
command_print(CMD_CTX, "memory bus access delay set to %" PRIi32 " tck",
- dap->memaccess_tck);
+ dap->ap[dap->apsel].memaccess_tck);
return ERROR_OK;
}
COMMAND_HANDLER(dap_apsel_command)
{
- struct target *target = get_current_target(CMD_CTX);
- struct arm *arm = target_to_arm(target);
- struct adiv5_dap *dap = arm->dap;
-
- uint32_t apsel, apid;
- int retval;
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint32_t apsel;
switch (CMD_ARGC) {
case 0:
- apsel = 0;
- break;
+ command_print(CMD_CTX, "%" PRIi32, dap->apsel);
+ return ERROR_OK;
case 1:
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
/* AP address is in bits 31:24 of DP_SELECT */
}
dap->apsel = apsel;
- dap_ap_select(dap, apsel);
-
- retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_run(dap);
- if (retval != ERROR_OK)
- return retval;
-
- command_print(CMD_CTX, "ap %" PRIi32 " selected, identification register 0x%8.8" PRIx32,
- apsel, apid);
-
- return retval;
+ return ERROR_OK;
}
COMMAND_HANDLER(dap_apcsw_command)
{
- struct target *target = get_current_target(CMD_CTX);
- struct arm *arm = target_to_arm(target);
- struct adiv5_dap *dap = arm->dap;
-
- uint32_t apcsw = dap->apcsw[dap->apsel], sprot = 0;
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint32_t apcsw = dap->ap[dap->apsel].csw_default;
+ uint32_t csw_val, csw_mask;
switch (CMD_ARGC) {
case 0:
- command_print(CMD_CTX, "apsel %" PRIi32 " selected, csw 0x%8.8" PRIx32,
- (dap->apsel), apcsw);
- break;
+ command_print(CMD_CTX, "ap %" PRIi32 " selected, csw 0x%8.8" PRIx32,
+ dap->apsel, apcsw);
+ return ERROR_OK;
case 1:
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], sprot);
- /* AP address is in bits 31:24 of DP_SELECT */
- if (sprot > 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
- if (sprot)
- apcsw |= CSW_SPROT;
+ if (strcmp(CMD_ARGV[0], "default") == 0)
+ csw_val = CSW_DEFAULT;
else
- apcsw &= ~CSW_SPROT;
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], csw_val);
+
+ if (csw_val & (CSW_SIZE_MASK | CSW_ADDRINC_MASK)) {
+ LOG_ERROR("CSW value cannot include 'Size' and 'AddrInc' bit-fields");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ apcsw = csw_val;
+ break;
+ case 2:
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], csw_val);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], csw_mask);
+ if (csw_mask & (CSW_SIZE_MASK | CSW_ADDRINC_MASK)) {
+ LOG_ERROR("CSW mask cannot include 'Size' and 'AddrInc' bit-fields");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ apcsw = (apcsw & ~csw_mask) | (csw_val & csw_mask);
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- dap->apcsw[dap->apsel] = apcsw;
+ dap->ap[dap->apsel].csw_default = apcsw;
return 0;
}
COMMAND_HANDLER(dap_apid_command)
{
- struct target *target = get_current_target(CMD_CTX);
- struct arm *arm = target_to_arm(target);
- struct adiv5_dap *dap = arm->dap;
-
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
uint32_t apsel, apid;
int retval;
return ERROR_COMMAND_SYNTAX_ERROR;
}
- dap_ap_select(dap, apsel);
-
- retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
+ retval = dap_queue_ap_read(dap_ap(dap, apsel), AP_REG_IDR, &apid);
if (retval != ERROR_OK)
return retval;
retval = dap_run(dap);
return retval;
}
-COMMAND_HANDLER(dap_ti_be_32_quirks_command)
+COMMAND_HANDLER(dap_apreg_command)
{
- struct target *target = get_current_target(CMD_CTX);
- struct arm *arm = target_to_arm(target);
- struct adiv5_dap *dap = arm->dap;
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint32_t apsel, reg, value;
+ struct adiv5_ap *ap;
+ int retval;
+
+ if (CMD_ARGC < 2 || CMD_ARGC > 3)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
+ /* AP address is in bits 31:24 of DP_SELECT */
+ if (apsel >= 256)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ ap = dap_ap(dap, apsel);
+
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], reg);
+ if (reg >= 256 || (reg & 3))
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ if (CMD_ARGC == 3) {
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], value);
+ switch (reg) {
+ case MEM_AP_REG_CSW:
+ ap->csw_default = 0; /* invalid, force write */
+ retval = mem_ap_setup_csw(ap, value);
+ break;
+ case MEM_AP_REG_TAR:
+ ap->tar_valid = false; /* invalid, force write */
+ retval = mem_ap_setup_tar(ap, value);
+ break;
+ default:
+ retval = dap_queue_ap_write(ap, reg, value);
+ break;
+ }
+ } else {
+ retval = dap_queue_ap_read(ap, reg, &value);
+ }
+ if (retval == ERROR_OK)
+ retval = dap_run(dap);
+
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (CMD_ARGC == 2)
+ command_print(CMD_CTX, "0x%08" PRIx32, value);
+ return retval;
+}
+
+COMMAND_HANDLER(dap_dpreg_command)
+{
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint32_t reg, value;
+ int retval;
+
+ if (CMD_ARGC < 1 || CMD_ARGC > 2)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], reg);
+ if (reg >= 256 || (reg & 3))
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ if (CMD_ARGC == 2) {
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
+ retval = dap_queue_dp_write(dap, reg, value);
+ } else {
+ retval = dap_queue_dp_read(dap, reg, &value);
+ }
+ if (retval == ERROR_OK)
+ retval = dap_run(dap);
+
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (CMD_ARGC == 1)
+ command_print(CMD_CTX, "0x%08" PRIx32, value);
+
+ return retval;
+}
+
+COMMAND_HANDLER(dap_ti_be_32_quirks_command)
+{
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
uint32_t enable = dap->ti_be_32_quirks;
switch (CMD_ARGC) {
return 0;
}
-static const struct command_registration dap_commands[] = {
+const struct command_registration dap_instance_commands[] = {
{
.name = "info",
.handler = handle_dap_info_command,
{
.name = "apsel",
.handler = dap_apsel_command,
- .mode = COMMAND_EXEC,
+ .mode = COMMAND_ANY,
.help = "Set the currently selected AP (default 0) "
"and display the result",
.usage = "[ap_num]",
{
.name = "apcsw",
.handler = dap_apcsw_command,
- .mode = COMMAND_EXEC,
- .help = "Set csw access bit ",
- .usage = "[sprot]",
+ .mode = COMMAND_ANY,
+ .help = "Set CSW default bits",
+ .usage = "[value [mask]]",
},
{
"(default currently selected AP)",
.usage = "[ap_num]",
},
+ {
+ .name = "apreg",
+ .handler = dap_apreg_command,
+ .mode = COMMAND_EXEC,
+ .help = "read/write a register from AP "
+ "(reg is byte address of a word register, like 0 4 8...)",
+ .usage = "ap_num reg [value]",
+ },
+ {
+ .name = "dpreg",
+ .handler = dap_dpreg_command,
+ .mode = COMMAND_EXEC,
+ .help = "read/write a register from DP "
+ "(reg is byte address (bank << 4 | reg) of a word register, like 0 4 8...)",
+ .usage = "reg [value]",
+ },
{
.name = "baseaddr",
.handler = dap_baseaddr_command,
},
COMMAND_REGISTRATION_DONE
};
-
-const struct command_registration dap_command_handlers[] = {
- {
- .name = "dap",
- .mode = COMMAND_EXEC,
- .help = "DAP command group",
- .usage = "",
- .chain = dap_commands,
- },
- COMMAND_REGISTRATION_DONE
-};
projects / openocd / blobdiff