};
struct working_area {
- uint32_t address;
+ target_addr_t address;
uint32_t size;
bool free;
uint8_t *backup;
/* target_type.h contains the full definition of struct target_type */
struct target {
struct target_type *type; /* target type definition (name, access functions) */
- const char *cmd_name; /* tcl Name of target */
+ char *cmd_name; /* tcl Name of target */
int target_number; /* DO NOT USE! field to be removed in 2010 */
struct jtag_tap *tap; /* where on the jtag chain is this */
int32_t coreid; /* which device on the TAP? */
+ /** Should we defer examine to later */
+ bool defer_examine;
+
/**
* Indicates whether this target has been examined.
*
struct target_event_action *event_action;
int reset_halt; /* attempt resetting the CPU into the halted mode? */
- uint32_t working_area; /* working area (initialised RAM). Evaluated
+ target_addr_t working_area; /* working area (initialised RAM). Evaluated
* upon first allocation from virtual/physical address. */
bool working_area_virt_spec; /* virtual address specified? */
- uint32_t working_area_virt; /* virtual address */
+ target_addr_t working_area_virt; /* virtual address */
bool working_area_phys_spec; /* physical address specified? */
- uint32_t working_area_phys; /* physical address */
+ target_addr_t working_area_phys; /* physical address */
uint32_t working_area_size; /* size in bytes */
uint32_t backup_working_area; /* whether the content of the working area has to be preserved */
struct working_area *working_areas;/* list of allocated working areas */
struct debug_msg_receiver *dbgmsg; /* list of debug message receivers */
uint32_t dbg_msg_enabled; /* debug message status */
void *arch_info; /* architecture specific information */
+ void *private_config; /* pointer to target specific config data (for jim_configure hook) */
struct target *next; /* next target in list */
- int display; /* display async info in telnet session. Do not display
+ bool verbose_halt_msg; /* display async info in telnet session. Do not display
* lots of halted/resumed info when stepping in debugger. */
bool halt_issued; /* did we transition to halted state? */
int64_t halt_issued_time; /* Note time when halt was issued */
+ /* ARM v7/v8 targets with ADIv5 interface */
bool dbgbase_set; /* By default the debug base is not set */
uint32_t dbgbase; /* Really a Cortex-A specific option, but there is no
* system in place to support target specific options
* currently. */
+ bool has_dap; /* set to true if target has ADIv5 support */
+ bool dap_configured; /* set to true if ADIv5 DAP is configured */
+ bool tap_configured; /* set to true if JTAG tap has been configured
+ * through -chain-position */
+
struct rtos *rtos; /* Instance of Real Time Operating System support */
bool rtos_auto_detect; /* A flag that indicates that the RTOS has been specified as "auto"
* and must be detected when symbols are offered */
/* file-I/O information for host to do syscall */
struct gdb_fileio_info *fileio_info;
+
+ char *gdb_port_override; /* target-specific override for gdb_port */
+
+ /* The semihosting information, extracted from the target. */
+ struct semihosting *semihosting;
};
struct target_list {
struct gdb_fileio_info {
char *identifier;
- uint32_t param_1;
- uint32_t param_2;
- uint32_t param_3;
- uint32_t param_4;
+ uint64_t param_1;
+ uint64_t param_2;
+ uint64_t param_3;
+ uint64_t param_4;
};
/** Returns the instance-specific name of the specified target. */
TARGET_EVENT_RESET_ASSERT_POST,
TARGET_EVENT_RESET_DEASSERT_PRE,
TARGET_EVENT_RESET_DEASSERT_POST,
- TARGET_EVENT_RESET_HALT_PRE,
- TARGET_EVENT_RESET_HALT_POST,
- TARGET_EVENT_RESET_WAIT_PRE,
- TARGET_EVENT_RESET_WAIT_POST,
TARGET_EVENT_RESET_INIT,
TARGET_EVENT_RESET_END,
struct target_timer_callback *next;
};
+struct target_memory_check_block {
+ target_addr_t address;
+ uint32_t size;
+ uint32_t result;
+};
+
int target_register_commands(struct command_context *cmd_ctx);
int target_examine(void);
* yet it is possible to detect error conditions.
*/
int target_poll(struct target *target);
-int target_resume(struct target *target, int current, uint32_t address,
+int target_resume(struct target *target, int current, target_addr_t address,
int handle_breakpoints, int debug_execution);
int target_halt(struct target *target);
int target_call_event_callbacks(struct target *target, enum target_event event);
* This routine is a wrapper for target->type->step.
*/
int target_step(struct target *target,
- int current, uint32_t address, int handle_breakpoints);
+ int current, target_addr_t address, int handle_breakpoints);
/**
* Run an algorithm on the @a target given.
*
* This routine is a wrapper for target->type->read_memory.
*/
int target_read_memory(struct target *target,
- uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer);
+ target_addr_t address, uint32_t size, uint32_t count, uint8_t *buffer);
int target_read_phys_memory(struct target *target,
- uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer);
+ target_addr_t address, uint32_t size, uint32_t count, uint8_t *buffer);
/**
* Write @a count items of @a size bytes to the memory of @a target at
* the @a address given. @a address must be aligned to @a size
* This routine is wrapper for target->type->write_memory.
*/
int target_write_memory(struct target *target,
- uint32_t address, uint32_t size, uint32_t count, const uint8_t *buffer);
+ target_addr_t address, uint32_t size, uint32_t count, const uint8_t *buffer);
int target_write_phys_memory(struct target *target,
- uint32_t address, uint32_t size, uint32_t count, const uint8_t *buffer);
+ target_addr_t address, uint32_t size, uint32_t count, const uint8_t *buffer);
/*
* Write to target memory using the virtual address.
* peripheral registers which do not support byte operations.
*/
int target_write_buffer(struct target *target,
- uint32_t address, uint32_t size, const uint8_t *buffer);
+ target_addr_t address, uint32_t size, const uint8_t *buffer);
int target_read_buffer(struct target *target,
- uint32_t address, uint32_t size, uint8_t *buffer);
+ target_addr_t address, uint32_t size, uint8_t *buffer);
int target_checksum_memory(struct target *target,
- uint32_t address, uint32_t size, uint32_t *crc);
+ target_addr_t address, uint32_t size, uint32_t *crc);
int target_blank_check_memory(struct target *target,
- uint32_t address, uint32_t size, uint32_t *blank, uint8_t erased_value);
+ struct target_memory_check_block *blocks, int num_blocks,
+ uint8_t erased_value);
int target_wait_state(struct target *target, enum target_state state, int ms);
/**
void target_buffer_set_u32_array(struct target *target, uint8_t *buffer, uint32_t count, const uint32_t *srcbuf);
void target_buffer_set_u16_array(struct target *target, uint8_t *buffer, uint32_t count, const uint16_t *srcbuf);
-int target_read_u64(struct target *target, uint64_t address, uint64_t *value);
-int target_read_u32(struct target *target, uint32_t address, uint32_t *value);
-int target_read_u16(struct target *target, uint32_t address, uint16_t *value);
-int target_read_u8(struct target *target, uint32_t address, uint8_t *value);
-int target_write_u64(struct target *target, uint64_t address, uint64_t value);
-int target_write_u32(struct target *target, uint32_t address, uint32_t value);
-int target_write_u16(struct target *target, uint32_t address, uint16_t value);
-int target_write_u8(struct target *target, uint32_t address, uint8_t value);
+int target_read_u64(struct target *target, target_addr_t address, uint64_t *value);
+int target_read_u32(struct target *target, target_addr_t address, uint32_t *value);
+int target_read_u16(struct target *target, target_addr_t address, uint16_t *value);
+int target_read_u8(struct target *target, target_addr_t address, uint8_t *value);
+int target_write_u64(struct target *target, target_addr_t address, uint64_t value);
+int target_write_u32(struct target *target, target_addr_t address, uint32_t value);
+int target_write_u16(struct target *target, target_addr_t address, uint16_t value);
+int target_write_u8(struct target *target, target_addr_t address, uint8_t value);
+
+int target_write_phys_u64(struct target *target, target_addr_t address, uint64_t value);
+int target_write_phys_u32(struct target *target, target_addr_t address, uint32_t value);
+int target_write_phys_u16(struct target *target, target_addr_t address, uint16_t value);
+int target_write_phys_u8(struct target *target, target_addr_t address, uint8_t value);
/* Issues USER() statements with target state information */
int target_arch_state(struct target *target);
projects / openocd / blobdiff