]> git.sur5r.net Git - openocd/commitdiff
rtos: add support for uC/OS-III
authorSteven Stallion <stallion@squareup.com>
Sat, 16 Jul 2016 03:01:00 +0000 (22:01 -0500)
committerPaul Fertser <fercerpav@gmail.com>
Thu, 8 Dec 2016 12:29:35 +0000 (12:29 +0000)
This patch introduces RTOS support for uC/OS-III. Currently, only
FPU-less ARM Cortex-M targets are supported. Due to the configurability
of the RTOS, an OpenOCD-specific file must be linked along with the
project to determine the correct offsets within the OS_TCB structure.

In addition to the above, a crash was fixed in rtos_get_gdb_reg_list
such that RTOS support could be used between resets without restarting
OpenOCD and support for the Hg packet was cleaned up.

Change-Id: Ide004a689e6b886185df665c00fb644629eb31d1
Signed-off-by: Steven Stallion <stallion@squareup.com>
Reviewed-on: http://openocd.zylin.com/3556
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
contrib/rtos-helpers/uCOS-III-openocd.c [new file with mode: 0644]
doc/openocd.texi
src/rtos/Makefile.am
src/rtos/rtos.c
src/rtos/rtos_ucos_iii_stackings.c [new file with mode: 0644]
src/rtos/rtos_ucos_iii_stackings.h [new file with mode: 0644]
src/rtos/uCOS-III.c [new file with mode: 0644]

diff --git a/contrib/rtos-helpers/uCOS-III-openocd.c b/contrib/rtos-helpers/uCOS-III-openocd.c
new file mode 100644 (file)
index 0000000..9037334
--- /dev/null
@@ -0,0 +1,32 @@
+/*
+ * uC/OS-III does not provide a fixed layout for OS_TCB, which makes it
+ * impossible to determine the appropriate offsets within the structure
+ * unaided. A priori knowledge of offsets based on os_dbg.c is tied to a
+ * specific release and thusly, brittle. The constants defined below
+ * provide the neccessary information OpenOCD needs to provide support
+ * in the most robust manner possible.
+ *
+ * This file should be linked along with the project to enable RTOS
+ * support for uC/OS-III.
+ */
+
+#include <os.h>
+
+#if OS_CFG_DBG_EN == 0
+#error "OS_CFG_DBG_EN is required to enable RTOS support for OpenOCD"
+#endif
+
+#define OFFSET_OF(type, member) ((CPU_SIZE_T)&(((type *)0)->member))
+
+#ifdef __GNUC__
+#define USED __attribute__((used))
+#else
+#define USED
+#endif
+
+const CPU_SIZE_T USED openocd_OS_TCB_StkPtr_offset = OFFSET_OF(OS_TCB, StkPtr);
+const CPU_SIZE_T USED openocd_OS_TCB_NamePtr_offset = OFFSET_OF(OS_TCB, NamePtr);
+const CPU_SIZE_T USED openocd_OS_TCB_TaskState_offset = OFFSET_OF(OS_TCB, TaskState);
+const CPU_SIZE_T USED openocd_OS_TCB_Prio_offset = OFFSET_OF(OS_TCB, Prio);
+const CPU_SIZE_T USED openocd_OS_TCB_DbgPrevPtr_offset = OFFSET_OF(OS_TCB, DbgPrevPtr);
+const CPU_SIZE_T USED openocd_OS_TCB_DbgNextPtr_offset = OFFSET_OF(OS_TCB, DbgNextPtr);
index 497a20b5b138a79cf1315fc211347285046c6e0f..372683a9ccc2e1313f1d47339479ed22c77f2bac 100644 (file)
@@ -4123,7 +4123,8 @@ The value should normally correspond to a static mapping for the
 @anchor{rtostype}
 @item @code{-rtos} @var{rtos_type} -- enable rtos support for target,
 @var{rtos_type} can be one of @option{auto}|@option{eCos}|@option{ThreadX}|
-@option{FreeRTOS}|@option{linux}|@option{ChibiOS}|@option{embKernel}|@option{mqx}
+@option{FreeRTOS}|@option{linux}|@option{ChibiOS}|@option{embKernel}|@option{mqx}|
+@option{uCOS-III}
 @xref{gdbrtossupport,,RTOS Support}.
 
 @item @code{-defer-examine} -- skip target examination at initial JTAG chain
@@ -8833,6 +8834,7 @@ Currently supported rtos's include:
 @item @option{ChibiOS}
 @item @option{embKernel}
 @item @option{mqx}
+@item @option{uCOS-III}
 @end itemize
 
 @quotation Note
@@ -8866,10 +8868,12 @@ Rtos::sCurrentTask, Rtos::sListReady, Rtos::sListSleep,
 Rtos::sListSuspended, Rtos::sMaxPriorities, Rtos::sCurrentTaskCount.
 @item mqx symbols
 _mqx_kernel_data, MQX_init_struct.
+@item uC/OS-III symbols
+OSRunning, OSTCBCurPtr, OSTaskDbgListPtr, OSTaskQty
 @end table
 
 For most RTOS supported the above symbols will be exported by default. However for
-some, eg. FreeRTOS, extra steps must be taken.
+some, eg. FreeRTOS and uC/OS-III, extra steps must be taken.
 
 These RTOSes may require additional OpenOCD-specific file to be linked
 along with the project:
@@ -8877,6 +8881,8 @@ along with the project:
 @table @code
 @item FreeRTOS
 contrib/rtos-helpers/FreeRTOS-openocd.c
+@item uC/OS-III
+contrib/rtos-helpers/uCOS-III-openocd.c
 @end table
 
 @node Tcl Scripting API
index fdca394e4c4998ebf47417568419360acbf192e2..a9122b262c5ae9daabb956ac87deb9726f6f5401 100644 (file)
@@ -20,8 +20,8 @@ include $(top_srcdir)/common.mk
 
 METASOURCES = AUTO
 noinst_LTLIBRARIES = librtos.la
-noinst_HEADERS = rtos.h rtos_standard_stackings.h rtos_ecos_stackings.h linux_header.h rtos_chibios_stackings.h rtos_embkernel_stackings.h rtos_mqx_stackings.h
-librtos_la_SOURCES = rtos.c rtos_standard_stackings.c rtos_ecos_stackings.c  rtos_chibios_stackings.c rtos_embkernel_stackings.c rtos_mqx_stackings.c FreeRTOS.c ThreadX.c eCos.c linux.c ChibiOS.c embKernel.c mqx.c
+noinst_HEADERS = rtos.h rtos_standard_stackings.h rtos_ecos_stackings.h linux_header.h rtos_chibios_stackings.h rtos_embkernel_stackings.h rtos_mqx_stackings.h rtos_ucos_iii_stackings.h
+librtos_la_SOURCES = rtos.c rtos_standard_stackings.c rtos_ecos_stackings.c  rtos_chibios_stackings.c rtos_embkernel_stackings.c rtos_mqx_stackings.c rtos_ucos_iii_stackings.c FreeRTOS.c ThreadX.c eCos.c linux.c ChibiOS.c embKernel.c mqx.c uCOS-III.c
 
 librtos_la_CFLAGS =
 if IS_MINGW
index aa8efbe7270be719b8612dd1b8e5feba0eb03f1c..785fc6161a1f798da791b0e6193b73ec683dc714 100644 (file)
@@ -34,6 +34,7 @@ extern struct rtos_type Linux_os;
 extern struct rtos_type ChibiOS_rtos;
 extern struct rtos_type embKernel_rtos;
 extern struct rtos_type mqx_rtos;
+extern struct rtos_type uCOS_III_rtos;
 
 static struct rtos_type *rtos_types[] = {
        &ThreadX_rtos,
@@ -43,6 +44,7 @@ static struct rtos_type *rtos_types[] = {
        &ChibiOS_rtos,
        &embKernel_rtos,
        &mqx_rtos,
+       &uCOS_III_rtos,
        NULL
 };
 
@@ -400,9 +402,14 @@ int rtos_thread_packet(struct connection *connection, char const *packet, int pa
        } else if (packet[0] == 'H') {  /* Set current thread ( 'c' for step and continue, 'g' for
                                         * all other operations ) */
                if ((packet[1] == 'g') && (target->rtos != NULL)) {
-                       sscanf(packet, "Hg%16" SCNx64, &target->rtos->current_threadid);
-                       LOG_DEBUG("RTOS: GDB requested to set current thread to 0x%" PRIx64 "\r\n",
-                                                                               target->rtos->current_threadid);
+                       threadid_t threadid;
+                       sscanf(packet, "Hg%16" SCNx64, &threadid);
+                       LOG_DEBUG("RTOS: GDB requested to set current thread to 0x%" PRIx64, threadid);
+                       /* threadid of 0 indicates target should choose */
+                       if (threadid == 0)
+                               target->rtos->current_threadid = target->rtos->current_thread;
+                       else
+                               target->rtos->current_threadid = threadid;
                }
                gdb_put_packet(connection, "OK", 2);
                return ERROR_OK;
@@ -426,9 +433,13 @@ int rtos_get_gdb_reg_list(struct connection *connection)
                                                                                current_threadid,
                                                                                target->rtos->current_thread);
 
-               target->rtos->type->get_thread_reg_list(target->rtos,
-                       current_threadid,
-                       &hex_reg_list);
+               int retval = target->rtos->type->get_thread_reg_list(target->rtos,
+                               current_threadid,
+                               &hex_reg_list);
+               if (retval != ERROR_OK) {
+                       LOG_ERROR("RTOS: failed to get register list");
+                       return retval;
+               }
 
                if (hex_reg_list != NULL) {
                        gdb_put_packet(connection, hex_reg_list, strlen(hex_reg_list));
@@ -546,5 +557,7 @@ void rtos_free_threadlist(struct rtos *rtos)
                free(rtos->thread_details);
                rtos->thread_details = NULL;
                rtos->thread_count = 0;
+               rtos->current_threadid = -1;
+               rtos->current_thread = 0;
        }
 }
diff --git a/src/rtos/rtos_ucos_iii_stackings.c b/src/rtos/rtos_ucos_iii_stackings.c
new file mode 100644 (file)
index 0000000..f2f5564
--- /dev/null
@@ -0,0 +1,53 @@
+/***************************************************************************
+ *   Copyright (C) 2016 by Square, Inc.                                    *
+ *   Steven Stallion <stallion@squareup.com>                               *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
+ ***************************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "rtos.h"
+#include "rtos_standard_stackings.h"
+#include "target/armv7m.h"
+
+static const struct stack_register_offset rtos_uCOS_III_Cortex_M_stack_offsets[ARMV7M_NUM_CORE_REGS] = {
+       { 0x20, 32 },           /* r0   */
+       { 0x24, 32 },           /* r1   */
+       { 0x28, 32 },           /* r2   */
+       { 0x2c, 32 },           /* r3   */
+       { 0x00, 32 },           /* r4   */
+       { 0x04, 32 },           /* r5   */
+       { 0x08, 32 },           /* r6   */
+       { 0x0c, 32 },           /* r7   */
+       { 0x10, 32 },           /* r8   */
+       { 0x14, 32 },           /* r9   */
+       { 0x18, 32 },           /* r10  */
+       { 0x1c, 32 },           /* r11  */
+       { 0x30, 32 },           /* r12  */
+       { -2,   32 },           /* sp   */
+       { 0x34, 32 },           /* lr   */
+       { 0x38, 32 },           /* pc   */
+       { 0x3c, 32 },           /* xPSR */
+};
+
+const struct rtos_register_stacking rtos_uCOS_III_Cortex_M_stacking = {
+       0x40,                                   /* stack_registers_size */
+       -1,                                     /* stack_growth_direction */
+       ARMV7M_NUM_CORE_REGS,                   /* num_output_registers */
+       rtos_generic_stack_align8,              /* stack_alignment */
+       rtos_uCOS_III_Cortex_M_stack_offsets    /* register_offsets */
+};
diff --git a/src/rtos/rtos_ucos_iii_stackings.h b/src/rtos/rtos_ucos_iii_stackings.h
new file mode 100644 (file)
index 0000000..c462cd7
--- /dev/null
@@ -0,0 +1,30 @@
+/***************************************************************************
+ *   Copyright (C) 2016 by Square, Inc.                                    *
+ *   Steven Stallion <stallion@squareup.com>                               *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
+ ***************************************************************************/
+
+#ifndef OPENOCD_RTOS_RTOS_UCOS_III_STACKINGS_H
+#define OPENOCD_RTOS_RTOS_UCOS_III_STACKINGS_H
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "rtos.h"
+
+extern const struct rtos_register_stacking rtos_uCOS_III_Cortex_M_stacking;
+
+#endif /* OPENOCD_RTOS_RTOS_UCOS_III_STACKINGS_H */
diff --git a/src/rtos/uCOS-III.c b/src/rtos/uCOS-III.c
new file mode 100644 (file)
index 0000000..75cfe52
--- /dev/null
@@ -0,0 +1,509 @@
+/***************************************************************************
+ *   Copyright (C) 2016 by Square, Inc.                                    *
+ *   Steven Stallion <stallion@squareup.com>                               *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
+ ***************************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <helper/time_support.h>
+#include <jtag/jtag.h>
+#include "target/target.h"
+#include "target/target_type.h"
+#include "rtos.h"
+#include "helper/log.h"
+#include "helper/types.h"
+#include "rtos/rtos_ucos_iii_stackings.h"
+
+#ifndef UCOS_III_MAX_STRLEN
+#define UCOS_III_MAX_STRLEN 64
+#endif
+
+#ifndef UCOS_III_MAX_THREADS
+#define UCOS_III_MAX_THREADS 256
+#endif
+
+struct uCOS_III_params {
+       const char *target_name;
+       const unsigned char pointer_width;
+       symbol_address_t thread_stack_offset;
+       symbol_address_t thread_name_offset;
+       symbol_address_t thread_state_offset;
+       symbol_address_t thread_priority_offset;
+       symbol_address_t thread_prev_offset;
+       symbol_address_t thread_next_offset;
+       bool thread_offsets_updated;
+       size_t threadid_start;
+       const struct rtos_register_stacking *stacking_info;
+       size_t num_threads;
+       symbol_address_t threads[];
+};
+
+static const struct uCOS_III_params uCOS_III_params_list[] = {
+       {
+               "cortex_m",                             /* target_name */
+               sizeof(uint32_t),                       /* pointer_width */
+               0,                                      /* thread_stack_offset */
+               0,                                      /* thread_name_offset */
+               0,                                      /* thread_state_offset */
+               0,                                      /* thread_priority_offset */
+               0,                                      /* thread_prev_offset */
+               0,                                      /* thread_next_offset */
+               false,                                  /* thread_offsets_updated */
+               1,                                      /* threadid_start */
+               &rtos_uCOS_III_Cortex_M_stacking,       /* stacking_info */
+               0,                                      /* num_threads */
+       },
+};
+
+static const char * const uCOS_III_symbol_list[] = {
+       "OSRunning",
+       "OSTCBCurPtr",
+       "OSTaskDbgListPtr",
+       "OSTaskQty",
+
+       /* also see: contrib/rtos-helpers/uCOS-III-openocd.c */
+       "openocd_OS_TCB_StkPtr_offset",
+       "openocd_OS_TCB_NamePtr_offset",
+       "openocd_OS_TCB_TaskState_offset",
+       "openocd_OS_TCB_Prio_offset",
+       "openocd_OS_TCB_DbgPrevPtr_offset",
+       "openocd_OS_TCB_DbgNextPtr_offset",
+       NULL
+};
+
+enum uCOS_III_symbol_values {
+       uCOS_III_VAL_OSRunning,
+       uCOS_III_VAL_OSTCBCurPtr,
+       uCOS_III_VAL_OSTaskDbgListPtr,
+       uCOS_III_VAL_OSTaskQty,
+
+       /* also see: contrib/rtos-helpers/uCOS-III-openocd.c */
+       uCOS_III_VAL_OS_TCB_StkPtr_offset,
+       uCOS_III_VAL_OS_TCB_NamePtr_offset,
+       uCOS_III_VAL_OS_TCB_TaskState_offset,
+       uCOS_III_VAL_OS_TCB_Prio_offset,
+       uCOS_III_VAL_OS_TCB_DbgPrevPtr_offset,
+       uCOS_III_VAL_OS_TCB_DbgNextPtr_offset,
+};
+
+static const char * const uCOS_III_thread_state_list[] = {
+       "Ready",
+       "Delay",
+       "Pend",
+       "Pend Timeout",
+       "Suspended",
+       "Delay Suspended",
+       "Pend Suspended",
+       "Pend Timeout Suspended",
+};
+
+static int uCOS_III_find_or_create_thread(struct rtos *rtos, symbol_address_t thread_address,
+               threadid_t *threadid)
+{
+       struct uCOS_III_params *params = rtos->rtos_specific_params;
+       size_t thread_index;
+
+       for (thread_index = 0; thread_index < params->num_threads; thread_index++)
+               if (params->threads[thread_index] == thread_address)
+                       goto found;
+
+       if (params->num_threads == UCOS_III_MAX_THREADS) {
+               LOG_WARNING("uCOS-III: too many threads; increase UCOS_III_MAX_THREADS");
+               return ERROR_FAIL;
+       }
+
+       params->threads[thread_index] = thread_address;
+       params->num_threads++;
+found:
+       *threadid = thread_index + params->threadid_start;
+       return ERROR_OK;
+}
+
+static int uCOS_III_find_thread_address(struct rtos *rtos, threadid_t threadid,
+               symbol_address_t *thread_address)
+{
+       struct uCOS_III_params *params = rtos->rtos_specific_params;
+       size_t thread_index;
+
+       thread_index = threadid - params->threadid_start;
+       if (thread_index >= params->num_threads) {
+               LOG_ERROR("uCOS-III: failed to find thread address");
+               return ERROR_FAIL;
+       }
+
+       *thread_address = params->threads[thread_index];
+       return ERROR_OK;
+}
+
+static int uCOS_III_find_last_thread_address(struct rtos *rtos, symbol_address_t *thread_address)
+{
+       struct uCOS_III_params *params = rtos->rtos_specific_params;
+       int retval;
+
+       /* read the thread list head */
+       symbol_address_t thread_list_address = 0;
+
+       retval = target_read_memory(rtos->target,
+                                   rtos->symbols[uCOS_III_VAL_OSTaskDbgListPtr].address,
+                                   params->pointer_width,
+                                   1,
+                                   (void *)&thread_list_address);
+       if (retval != ERROR_OK) {
+               LOG_ERROR("uCOS-III: failed to read thread list address");
+               return retval;
+       }
+
+       /* advance to end of thread list */
+       do {
+               *thread_address = thread_list_address;
+
+               retval = target_read_memory(rtos->target,
+                                           thread_list_address + params->thread_next_offset,
+                                           params->pointer_width,
+                                           1,
+                                           (void *)&thread_list_address);
+               if (retval != ERROR_OK) {
+                       LOG_ERROR("uCOS-III: failed to read next thread address");
+                       return retval;
+               }
+       } while (thread_list_address != 0);
+
+       return ERROR_OK;
+}
+
+static int uCOS_III_update_thread_offsets(struct rtos *rtos)
+{
+       struct uCOS_III_params *params = rtos->rtos_specific_params;
+
+       if (params->thread_offsets_updated)
+               return ERROR_OK;
+
+       const struct thread_offset_map {
+               enum uCOS_III_symbol_values symbol_value;
+               symbol_address_t *thread_offset;
+       } thread_offset_maps[] = {
+               {
+                       uCOS_III_VAL_OS_TCB_StkPtr_offset,
+                       &params->thread_stack_offset,
+               },
+               {
+                       uCOS_III_VAL_OS_TCB_NamePtr_offset,
+                       &params->thread_name_offset,
+               },
+               {
+                       uCOS_III_VAL_OS_TCB_TaskState_offset,
+                       &params->thread_state_offset,
+               },
+               {
+                       uCOS_III_VAL_OS_TCB_Prio_offset,
+                       &params->thread_priority_offset,
+               },
+               {
+                       uCOS_III_VAL_OS_TCB_DbgPrevPtr_offset,
+                       &params->thread_prev_offset,
+               },
+               {
+                       uCOS_III_VAL_OS_TCB_DbgNextPtr_offset,
+                       &params->thread_next_offset,
+               },
+       };
+
+       for (size_t i = 0; i < ARRAY_SIZE(thread_offset_maps); i++) {
+               const struct thread_offset_map *thread_offset_map = &thread_offset_maps[i];
+
+               int retval = target_read_memory(rtos->target,
+                                               rtos->symbols[thread_offset_map->symbol_value].address,
+                                               params->pointer_width,
+                                               1,
+                                               (void *)thread_offset_map->thread_offset);
+               if (retval != ERROR_OK) {
+                       LOG_ERROR("uCOS-III: failed to read thread offset");
+                       return retval;
+               }
+       }
+
+       params->thread_offsets_updated = true;
+       return ERROR_OK;
+}
+
+static int uCOS_III_detect_rtos(struct target *target)
+{
+       return target->rtos->symbols != NULL &&
+           target->rtos->symbols[uCOS_III_VAL_OSRunning].address != 0;
+}
+
+static int uCOS_III_reset_handler(struct target *target, enum target_reset_mode reset_mode, void *priv)
+{
+       struct uCOS_III_params *params = target->rtos->rtos_specific_params;
+
+       params->thread_offsets_updated = false;
+       params->num_threads = 0;
+
+       return ERROR_OK;
+}
+
+static int uCOS_III_create(struct target *target)
+{
+       struct uCOS_III_params *params;
+
+       for (size_t i = 0; i < ARRAY_SIZE(uCOS_III_params_list); i++)
+               if (strcmp(uCOS_III_params_list[i].target_name, target->type->name) == 0) {
+                       params = malloc(sizeof(*params) +
+                           UCOS_III_MAX_THREADS * sizeof(*params->threads));
+                       if (params == NULL) {
+                               LOG_ERROR("uCOS-III: out of memory");
+                               return ERROR_FAIL;
+                       }
+
+                       memcpy(params, &uCOS_III_params_list[i], sizeof(uCOS_III_params_list[i]));
+                       target->rtos->rtos_specific_params = (void *)params;
+
+                       target_register_reset_callback(uCOS_III_reset_handler, NULL);
+
+                       return ERROR_OK;
+               }
+
+       LOG_ERROR("uCOS-III: target not supported: %s", target->type->name);
+       return ERROR_FAIL;
+}
+
+static int uCOS_III_update_threads(struct rtos *rtos)
+{
+       struct uCOS_III_params *params = rtos->rtos_specific_params;
+       int retval;
+
+       /* free previous thread details */
+       rtos_free_threadlist(rtos);
+
+       /* verify RTOS is running */
+       uint8_t rtos_running;
+
+       retval = target_read_u8(rtos->target,
+                               rtos->symbols[uCOS_III_VAL_OSRunning].address,
+                               &rtos_running);
+       if (retval != ERROR_OK) {
+               LOG_ERROR("uCOS-III: failed to read RTOS running");
+               return retval;
+       }
+
+       if (!rtos_running) {
+               rtos->thread_details = calloc(1, sizeof(struct thread_detail));
+               if (rtos->thread_details == NULL) {
+                       LOG_ERROR("uCOS-III: out of memory");
+                       return ERROR_FAIL;
+               }
+
+               rtos->thread_count = 1;
+               rtos->thread_details->threadid = 0;
+               rtos->thread_details->exists = true;
+               rtos->current_thread = 0;
+
+               return ERROR_OK;
+       }
+
+       /* update thread offsets */
+       retval = uCOS_III_update_thread_offsets(rtos);
+       if (retval != ERROR_OK) {
+               LOG_ERROR("uCOS-III: failed to update thread offsets");
+               return retval;
+       }
+
+       /* read current thread address */
+       symbol_address_t current_thread_address = 0;
+
+       retval = target_read_memory(rtos->target,
+                                   rtos->symbols[uCOS_III_VAL_OSTCBCurPtr].address,
+                                   params->pointer_width,
+                                   1,
+                                   (void *)&current_thread_address);
+       if (retval != ERROR_OK) {
+               LOG_ERROR("uCOS-III: failed to read current thread address");
+               return retval;
+       }
+
+       /* read number of tasks */
+       retval = target_read_u16(rtos->target,
+                                rtos->symbols[uCOS_III_VAL_OSTaskQty].address,
+                                (void *)&rtos->thread_count);
+       if (retval != ERROR_OK) {
+               LOG_ERROR("uCOS-III: failed to read thread count");
+               return retval;
+       }
+
+       rtos->thread_details = calloc(rtos->thread_count, sizeof(struct thread_detail));
+       if (rtos->thread_details == NULL) {
+               LOG_ERROR("uCOS-III: out of memory");
+               return ERROR_FAIL;
+       }
+
+       /*
+        * uC/OS-III adds tasks in LIFO order; advance to the end of the
+        * list and work backwards to preserve the intended order.
+        */
+       symbol_address_t thread_address = 0;
+
+       retval = uCOS_III_find_last_thread_address(rtos, &thread_address);
+       if (retval != ERROR_OK) {
+               LOG_ERROR("uCOS-III: failed to find last thread address");
+               return retval;
+       }
+
+       for (int i = 0; i < rtos->thread_count; i++) {
+               struct thread_detail *thread_detail = &rtos->thread_details[i];
+               char thread_str_buffer[UCOS_III_MAX_STRLEN + 1];
+
+               /* find or create new threadid */
+               retval = uCOS_III_find_or_create_thread(rtos,
+                                                       thread_address,
+                                                       &thread_detail->threadid);
+               if (retval != ERROR_OK) {
+                       LOG_ERROR("uCOS-III: failed to find or create thread");
+                       return retval;
+               }
+
+               if (thread_address == current_thread_address)
+                       rtos->current_thread = thread_detail->threadid;
+
+               thread_detail->exists = true;
+
+               /* read thread name */
+               symbol_address_t thread_name_address = 0;
+
+               retval = target_read_memory(rtos->target,
+                                           thread_address + params->thread_name_offset,
+                                           params->pointer_width,
+                                           1,
+                                           (void *)&thread_name_address);
+               if (retval != ERROR_OK) {
+                       LOG_ERROR("uCOS-III: failed to name address");
+                       return retval;
+               }
+
+               retval = target_read_buffer(rtos->target,
+                                           thread_name_address,
+                                           sizeof(thread_str_buffer),
+                                           (void *)thread_str_buffer);
+               if (retval != ERROR_OK) {
+                       LOG_ERROR("uCOS-III: failed to read thread name");
+                       return retval;
+               }
+
+               thread_str_buffer[sizeof(thread_str_buffer) - 1] = '\0';
+               thread_detail->thread_name_str = strdup(thread_str_buffer);
+
+               /* read thread extra info */
+               uint8_t thread_state;
+               uint8_t thread_priority;
+
+               retval = target_read_u8(rtos->target,
+                                       thread_address + params->thread_state_offset,
+                                       &thread_state);
+               if (retval != ERROR_OK) {
+                       LOG_ERROR("uCOS-III: failed to read thread state");
+                       return retval;
+               }
+
+               retval = target_read_u8(rtos->target,
+                                       thread_address + params->thread_priority_offset,
+                                       &thread_priority);
+               if (retval != ERROR_OK) {
+                       LOG_ERROR("uCOS-III: failed to read thread priority");
+                       return retval;
+               }
+
+               const char *thread_state_str;
+
+               if (thread_state < ARRAY_SIZE(uCOS_III_thread_state_list))
+                       thread_state_str = uCOS_III_thread_state_list[thread_state];
+               else
+                       thread_state_str = "Unknown";
+
+               snprintf(thread_str_buffer, sizeof(thread_str_buffer), "State: %s, Priority: %d",
+                        thread_state_str, thread_priority);
+               thread_detail->extra_info_str = strdup(thread_str_buffer);
+
+               /* read previous thread address */
+               retval = target_read_memory(rtos->target,
+                                           thread_address + params->thread_prev_offset,
+                                           params->pointer_width,
+                                           1,
+                                           (void *)&thread_address);
+               if (retval != ERROR_OK) {
+                       LOG_ERROR("uCOS-III: failed to read previous thread address");
+                       return retval;
+               }
+       }
+
+       return ERROR_OK;
+}
+
+static int uCOS_III_get_thread_reg_list(struct rtos *rtos, threadid_t threadid, char **hex_reg_list)
+{
+       struct uCOS_III_params *params = rtos->rtos_specific_params;
+       int retval;
+
+       /* find thread address for threadid */
+       symbol_address_t thread_address = 0;
+
+       retval = uCOS_III_find_thread_address(rtos, threadid, &thread_address);
+       if (retval != ERROR_OK) {
+               LOG_ERROR("uCOS-III: failed to find thread address");
+               return retval;
+       }
+
+       /* read thread stack address */
+       symbol_address_t stack_address = 0;
+
+       retval = target_read_memory(rtos->target,
+                                   thread_address + params->thread_stack_offset,
+                                   params->pointer_width,
+                                   1,
+                                   (void *)&stack_address);
+       if (retval != ERROR_OK) {
+               LOG_ERROR("uCOS-III: failed to read stack address");
+               return retval;
+       }
+
+       return rtos_generic_stack_read(rtos->target,
+                                      params->stacking_info,
+                                      stack_address,
+                                      hex_reg_list);
+}
+
+static int uCOS_III_get_symbol_list_to_lookup(symbol_table_elem_t *symbol_list[])
+{
+       *symbol_list = calloc(ARRAY_SIZE(uCOS_III_symbol_list), sizeof(symbol_table_elem_t));
+       if (*symbol_list == NULL) {
+               LOG_ERROR("uCOS-III: out of memory");
+               return ERROR_FAIL;
+       }
+
+       for (size_t i = 0; i < ARRAY_SIZE(uCOS_III_symbol_list); i++)
+               (*symbol_list)[i].symbol_name = uCOS_III_symbol_list[i];
+
+       return ERROR_OK;
+}
+
+const struct rtos_type uCOS_III_rtos = {
+       .name = "uCOS-III",
+       .detect_rtos = uCOS_III_detect_rtos,
+       .create = uCOS_III_create,
+       .update_threads = uCOS_III_update_threads,
+       .get_thread_reg_list = uCOS_III_get_thread_reg_list,
+       .get_symbol_list_to_lookup = uCOS_III_get_symbol_list_to_lookup,
+};