]> git.sur5r.net Git - openocd/commitdiff
flash: at91samd: flash write code cleaning
authorTomas Vanek <vanekt@fbl.cz>
Tue, 27 Oct 2015 11:49:17 +0000 (12:49 +0100)
committerSpencer Oliver <spen@spen-soft.co.uk>
Fri, 20 Nov 2015 18:26:58 +0000 (18:26 +0000)
SAMD driver suffered from following problems:

1) Flash was erased as an integral part of flash write.
It was not documented so with usual workflow it resulted
in erasing flash twice (and reducing flash lifespan)
and in almost double flashing time.

2) Sector erase was silently skipped if "is_erased" flag was set.
"is_erased" logic was not reliable, e.g. when a row write
was aborted after successful write of some pages, sector was
still considered as erased. "is_erased" flag could not
cope with flash writes from a user program.

3) Writing of a block with start address unaligned to a flash page
resulted in failed assert and OpenOCD abort.

4) Disabling cache in bit 18 of 16-bit halfword never worked.
MCU implements cache invalidate in hardware so there is no need
to take care about. This bug was reported by Tony DiCola.

New code does not erase flash in write operation.
Instead it traditionally relies on erasing flash beforehand.
"is_erased" logic and cache disabling is completely removed.
It simplifies write procedure a lot and flash write is now faster.

The change partly solves ticket #109 SAMD/SAM4L driver doubles flash erase.

Change-Id: I582b497d01a351575533a1f8c9810a4413be0216
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3045
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
src/flash/nor/at91samd.c

index a0bfcc363f8a92510e42e4e4212994cce03df054..04915802b64f5c527d5c02972f3dc3e8fff8159b 100644 (file)
@@ -255,7 +255,6 @@ struct samd_info {
        int num_pages;
        int sector_size;
 
-       bool manual_wp;
        bool probed;
        struct target *target;
        struct samd_info *next;
@@ -384,9 +383,6 @@ static int samd_probe(struct flash_bank *bank)
 
        samd_protect_check(bank);
 
-       /* By default we do not need to send page write commands */
-       chip->manual_wp = false;
-
        /* Done */
        chip->probed = true;
 
@@ -433,35 +429,16 @@ static bool samd_check_error(struct target *target)
 
 static int samd_issue_nvmctrl_command(struct target *target, uint16_t cmd)
 {
+       int res;
+
        if (target->state != TARGET_HALTED) {
                LOG_ERROR("Target not halted");
                return ERROR_TARGET_NOT_HALTED;
        }
 
-       /* Read current configuration. */
-       uint16_t tmp = 0;
-       int res = target_read_u16(target, SAMD_NVMCTRL + SAMD_NVMCTRL_CTRLB,
-                       &tmp);
-       if (res != ERROR_OK)
-               return res;
-
-       /* Set cache disable. */
-       res = target_write_u16(target, SAMD_NVMCTRL + SAMD_NVMCTRL_CTRLB,
-                       tmp | (1<<18));
-       if (res != ERROR_OK)
-               return res;
-
        /* Issue the NVM command */
-       int res_cmd = target_write_u16(target,
+       res = target_write_u16(target,
                        SAMD_NVMCTRL + SAMD_NVMCTRL_CTRLA, SAMD_NVM_CMD(cmd));
-
-       /* Try to restore configuration, regardless of NVM command write
-        * status. */
-       res = target_write_u16(target, SAMD_NVMCTRL + SAMD_NVMCTRL_CTRLB, tmp);
-
-       if (res_cmd != ERROR_OK)
-               return res_cmd;
-
        if (res != ERROR_OK)
                return res;
 
@@ -671,132 +648,19 @@ static int samd_erase(struct flash_bank *bank, int first, int last)
                        return ERROR_FLASH_OPERATION_FAILED;
                }
 
-               if (bank->sectors[s].is_erased != 1) {
-                       /* For each row in that sector */
-                       for (int r = s * rows_in_sector; r < (s + 1) * rows_in_sector; r++) {
-                               res = samd_erase_row(bank->target, r * chip->page_size * 4);
-                               if (res != ERROR_OK) {
-                                       LOG_ERROR("SAMD: failed to erase sector %d", s);
-                                       return res;
-                               }
-                       }
-
-                       bank->sectors[s].is_erased = 1;
-               }
-       }
-
-       return ERROR_OK;
-}
-
-static struct flash_sector *samd_find_sector_by_address(struct flash_bank *bank, uint32_t address)
-{
-       struct samd_info *chip = (struct samd_info *)bank->driver_priv;
-
-       for (int i = 0; i < bank->num_sectors; i++) {
-               if (bank->sectors[i].offset <= address &&
-                   address < bank->sectors[i].offset + chip->sector_size)
-                       return &bank->sectors[i];
-       }
-       return NULL;
-}
-
-/* Write an entire row (four pages) from host buffer 'buf' to row-aligned
- * 'address' in the Flash. */
-static int samd_write_row(struct flash_bank *bank, uint32_t address,
-               const uint8_t *buf)
-{
-       int res;
-       struct samd_info *chip = (struct samd_info *)bank->driver_priv;
-
-       struct flash_sector *sector = samd_find_sector_by_address(bank, address);
-
-       if (!sector) {
-               LOG_ERROR("Can't find sector corresponding to address 0x%08" PRIx32, address);
-               return ERROR_FLASH_OPERATION_FAILED;
-       }
-
-       if (sector->is_protected) {
-               LOG_ERROR("Trying to write to a protected sector at 0x%08" PRIx32, address);
-               return ERROR_FLASH_OPERATION_FAILED;
-       }
-
-       /* Erase the row that we'll be writing to */
-       res = samd_erase_row(bank->target, address);
-       if (res != ERROR_OK)
-               return res;
-
-       /* Now write the pages in this row. */
-       for (unsigned int i = 0; i < 4; i++) {
-               bool error;
-
-               /* Write the page contents to the target's page buffer.  A page write
-                * is issued automatically once the last location is written in the
-                * page buffer (ie: a complete page has been written out). */
-               res = target_write_memory(bank->target, address, 4,
-                               chip->page_size / 4, buf);
-               if (res != ERROR_OK) {
-                       LOG_ERROR("%s: %d", __func__, __LINE__);
-                       return res;
-               }
-
-               /* For some devices automatic page write is not default so we need
-                * to issue a write page CMD to the NVM */
-               if (chip->manual_wp == true) {
-                       res = samd_issue_nvmctrl_command(bank->target, SAMD_NVM_CMD_WP);
+               /* For each row in that sector */
+               for (int r = s * rows_in_sector; r < (s + 1) * rows_in_sector; r++) {
+                       res = samd_erase_row(bank->target, r * chip->page_size * 4);
                        if (res != ERROR_OK) {
-                               LOG_ERROR("%s: %d", __func__, __LINE__);
+                               LOG_ERROR("SAMD: failed to erase sector %d", s);
                                return res;
                        }
                }
-
-               /* Access through AHB is stalled while flash is being programmed */
-               usleep(200);
-
-               error = samd_check_error(bank->target);
-               if (error)
-                       return ERROR_FAIL;
-
-               /* Next page */
-               address += chip->page_size;
-               buf += chip->page_size;
        }
 
-       sector->is_erased = 0;
-
-       return res;
+       return ERROR_OK;
 }
 
-/* Write partial contents into row-aligned 'address' on the Flash from host
- * buffer 'buf' by writing 'nb' of 'buf' at 'row_offset' into the Flash row. */
-static int samd_write_row_partial(struct flash_bank *bank, uint32_t address,
-               const uint8_t *buf, uint32_t row_offset, uint32_t nb)
-{
-       int res;
-       struct samd_info *chip = (struct samd_info *)bank->driver_priv;
-       uint32_t row_size = chip->page_size * 4;
-       uint8_t *rb = malloc(row_size);
-       if (!rb)
-               return ERROR_FAIL;
-
-       assert(row_offset + nb < row_size);
-       assert((address % row_size) == 0);
-
-       /* Retrieve the full row contents from Flash */
-       res = target_read_memory(bank->target, address, 4, row_size / 4, rb);
-       if (res != ERROR_OK) {
-               free(rb);
-               return res;
-       }
-
-       /* Insert our partial row over the data from Flash */
-       memcpy(rb + (row_offset % row_size), buf, nb);
-
-       /* Write the row back out */
-       res = samd_write_row(bank, address, rb);
-       free(rb);
-
-       return res;
-}
 
 static int samd_write(struct flash_bank *bank, const uint8_t *buffer,
                uint32_t offset, uint32_t count)
@@ -804,13 +668,15 @@ static int samd_write(struct flash_bank *bank, const uint8_t *buffer,
        int res;
        uint32_t nvm_ctrlb;
        uint32_t address;
-       uint32_t nb = 0;
+       uint32_t pg_offset;
+       uint32_t nb;
+       uint32_t nw;
        struct samd_info *chip = (struct samd_info *)bank->driver_priv;
-       uint32_t row_size = chip->page_size * 4;
+       uint8_t *pb = NULL;
+       bool manual_wp;
 
        if (bank->target->state != TARGET_HALTED) {
                LOG_ERROR("Target not halted");
-
                return ERROR_TARGET_NOT_HALTED;
        }
 
@@ -826,66 +692,93 @@ static int samd_write(struct flash_bank *bank, const uint8_t *buffer,
                return res;
 
        if (nvm_ctrlb & SAMD_NVM_CTRLB_MANW)
-               chip->manual_wp = true;
+               manual_wp = true;
        else
-               chip->manual_wp = false;
+               manual_wp = false;
 
+       res = samd_issue_nvmctrl_command(bank->target, SAMD_NVM_CMD_PBC);
+       if (res != ERROR_OK) {
+               LOG_ERROR("%s: %d", __func__, __LINE__);
+               return res;
+       }
 
-       if (offset % row_size) {
-               /* We're starting at an unaligned offset so we'll write a partial row
-                * comprising that offset and up to the end of that row. */
-               nb = row_size - (offset % row_size);
-               if (nb > count)
+       while (count) {
+               nb = chip->page_size - offset % chip->page_size;
+               if (count < nb)
                        nb = count;
-       } else if (count < row_size) {
-               /* We're writing an aligned but partial row. */
-               nb = count;
-       }
 
-       address = (offset / row_size) * row_size + bank->base;
+               address = bank->base + offset;
+               pg_offset = offset % chip->page_size;
 
-       if (nb > 0) {
-               res = samd_write_row_partial(bank, address, buffer,
-                               offset % row_size, nb);
-               if (res != ERROR_OK)
-                       return res;
+               if (offset % 4 || (offset + nb) % 4) {
+                       /* Either start or end of write is not word aligned */
+                       if (!pb) {
+                               pb = malloc(chip->page_size);
+                               if (!pb)
+                                       return ERROR_FAIL;
+                       }
 
-               /* We're done with the row contents */
-               count -= nb;
-               offset += nb;
-               buffer += row_size;
-       }
+                       /* Set temporary page buffer to 0xff and overwrite the relevant part */
+                       memset(pb, 0xff, chip->page_size);
+                       memcpy(pb + pg_offset, buffer, nb);
+
+                       /* Align start address to a word boundary */
+                       address -= offset % 4;
+                       pg_offset -= offset % 4;
+                       assert(pg_offset % 4 == 0);
+
+                       /* Extend length to whole words */
+                       nw = (nb + offset % 4 + 3) / 4;
+                       assert(pg_offset + 4 * nw <= chip->page_size);
+
+                       /* Now we have original data extended by 0xff bytes
+                        * to the nearest word boundary on both start and end */
+                       res = target_write_memory(bank->target, address, 4, nw, pb + pg_offset);
+               } else {
+                       assert(nb % 4 == 0);
+                       nw = nb / 4;
+                       assert(pg_offset + 4 * nw <= chip->page_size);
 
-       /* There's at least one aligned row to write out. */
-       if (count >= row_size) {
-               int nr = count / row_size + ((count % row_size) ? 1 : 0);
-               unsigned int r = 0;
-
-               for (unsigned int i = address / row_size;
-                               (i < (address / row_size) + nr) && count > 0; i++) {
-                       address = (i * row_size) + bank->base;
-
-                       if (count >= row_size) {
-                               res = samd_write_row(bank, address, buffer + (r * row_size));
-                               /* Advance one row */
-                               offset += row_size;
-                               count -= row_size;
-                       } else {
-                               res = samd_write_row_partial(bank, address,
-                                               buffer + (r * row_size), 0, count);
-                               /* We're done after this. */
-                               offset += count;
-                               count = 0;
+                       /* Word aligned data, use direct write from buffer */
+                       res = target_write_memory(bank->target, address, 4, nw, buffer);
+               }
+               if (res != ERROR_OK) {
+                       LOG_ERROR("%s: %d", __func__, __LINE__);
+                       goto free_pb;
+               }
+
+               /* Devices with errata 13134 have automatic page write enabled by default
+                * For other devices issue a write page CMD to the NVM
+                * If the page has not been written up to the last word
+                * then issue CMD_WP always */
+               if (manual_wp || pg_offset + 4 * nw < chip->page_size) {
+                       res = samd_issue_nvmctrl_command(bank->target, SAMD_NVM_CMD_WP);
+                       if (res != ERROR_OK) {
+                               LOG_ERROR("%s: %d", __func__, __LINE__);
+                               goto free_pb;
                        }
+               }
 
-                       r++;
+               /* Access through AHB is stalled while flash is being programmed */
+               usleep(200);
 
-                       if (res != ERROR_OK)
-                               return res;
+               if (samd_check_error(bank->target)) {
+                       LOG_ERROR("%s: write failed at address 0x%08" PRIx32, __func__, address);
+                       res = ERROR_FAIL;
+                       goto free_pb;
                }
+
+               /* We're done with the page contents */
+               count -= nb;
+               offset += nb;
+               buffer += nb;
        }
 
-       return ERROR_OK;
+free_pb:
+       if (pb)
+               free(pb);
+
+       return res;
 }
 
 FLASH_BANK_COMMAND_HANDLER(samd_flash_bank_command)