]> git.sur5r.net Git - openocd/commitdiff
- Added support for ARM926EJ-S based cores
authordrath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Thu, 25 Jan 2007 10:30:42 +0000 (10:30 +0000)
committerdrath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Thu, 25 Jan 2007 10:30:42 +0000 (10:30 +0000)
- Added contributors to AUTHORS file
- Added link to Joern Kaipf's OOCD-Link

git-svn-id: svn://svn.berlios.de/openocd/trunk@126 b42882b7-edfa-0310-969c-e2dbd0fdcd60

AUTHORS
README
src/target/Makefile.am
src/target/arm926ejs.c [new file with mode: 0644]
src/target/arm926ejs.h [new file with mode: 0644]
src/target/target.c

diff --git a/AUTHORS b/AUTHORS
index 79755bb88a9dc1c02a298531af7a254915067125..784716e3722d95f9e0c8038214512a4f64b79590 100644 (file)
--- a/AUTHORS
+++ b/AUTHORS
@@ -1 +1,4 @@
 Dominic Rath <Dominic.Rath@gmx.de>
+Magnus Lundin <lundin@mlu.mine.nu>
+Michael Fischer <fischermi@t-online.de>
+Spencer Oliver <spen@spen-soft.co.uk>
diff --git a/README b/README
index 47cab624f5c0a22313a6ef3e0a345b3fd306421e..3dc5865c705705f0ebe615b62089ef5a514e7a8c 100644 (file)
--- a/README
+++ b/README
@@ -38,6 +38,9 @@ interface for use with the OpenOCD. Schematics are available at the USBJTAG
 website, and a homebrew device can easily be built using the FTDI evaluation
 module DLP2232M.
 
+* OOCD-Link: http://www.joernonline.de/dw/doku.php?id=en:projects:oocdlink
+Similar to the USBJTAG, this design comes with free schematics, too.
+
 * Amontec JTAGkey: www.amontec.com
 The Amontec JTAGkey offers support for a wide variety of target voltages from
 1.4V to 5V. It also allows the JTAG lines and reset signals to be tri-stated,
@@ -75,11 +78,6 @@ This version of openocd supports the following cores:
 Support for Intel XScale CPUs (PXA25x, PXA27x and IXP4xx) is currently being
 developed.
 
-The OpenOCD is only tested with little-endian targets, but support for
-big-endian is planned. If you're interested in helping with this (and you
-happen to have a big-endian ARM7/ARM9 system, feel free to contact
-Dominic.Rath <at> gmx.de.
-
 3. Host platforms
 
 OpenOCD was originally developed on x86-Linux, but has since then been ported
index 2936967a4cfec897181a67110897df18b3de0751..35414f3727e89b519fe7c3a66b735e9d6c2747e3 100644 (file)
@@ -3,7 +3,7 @@ METASOURCES = AUTO
 noinst_LIBRARIES = libtarget.a
 libtarget_a_SOURCES = target.c register.c breakpoints.c armv4_5.c embeddedice.c etm.c arm7tdmi.c arm9tdmi.c \
        arm_jtag.c arm7_9_common.c algorithm.c arm920t.c arm720t.c armv4_5_mmu.c armv4_5_cache.c arm_disassembler.c \
-       arm966e.c
+       arm966e.c arm926ejs.c
 noinst_HEADERS = target.h register.h armv4_5.h embeddedice.h etm.h arm7tdmi.h arm9tdmi.h \
                arm_jtag.h arm7_9_common.h arm920t.h arm720t.h armv4_5_mmu.h armv4_5_cache.h breakpoints.h algorithm.h \
-               arm_disassembler.h arm966e.h
+               arm_disassembler.h arm966e.h arm926ejs.h
diff --git a/src/target/arm926ejs.c b/src/target/arm926ejs.c
new file mode 100644 (file)
index 0000000..829fb32
--- /dev/null
@@ -0,0 +1,845 @@
+/***************************************************************************
+ *   Copyright (C) 2007 by Dominic Rath                                    *
+ *   Dominic.Rath@gmx.de                                                   *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program; if not, write to the                         *
+ *   Free Software Foundation, Inc.,                                       *
+ *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "arm926ejs.h"
+#include "jtag.h"
+#include "log.h"
+
+#include <stdlib.h>
+#include <string.h>
+
+#if 0
+#define _DEBUG_INSTRUCTION_EXECUTION_
+#endif
+
+/* cli handling */
+int arm926ejs_register_commands(struct command_context_s *cmd_ctx);
+
+int arm926ejs_handle_cp15_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int arm926ejs_handle_cp15i_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int arm926ejs_handle_virt2phys_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int arm926ejs_handle_cache_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int arm926ejs_handle_md_phys_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int arm926ejs_handle_mw_phys_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+int arm926ejs_handle_read_cache_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int arm926ejs_handle_read_mmu_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+/* forward declarations */
+int arm926ejs_target_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct target_s *target);
+int arm926ejs_init_target(struct command_context_s *cmd_ctx, struct target_s *target);
+int arm926ejs_quit();
+int arm926ejs_arch_state(struct target_s *target, char *buf, int buf_size);
+int arm926ejs_read_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
+int arm926ejs_write_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
+int arm926ejs_soft_reset_halt(struct target_s *target);
+
+#define ARM926EJS_CP15_ADDR(opcode_1, opcode_2, CRn, CRm) ((opcode_1 << 11) | (opcode_2 << 8) | (CRn << 4) | (CRm << 0))
+
+target_type_t arm926ejs_target =
+{
+       .name = "arm926ejs",
+
+       .poll = arm7_9_poll,
+       .arch_state = arm926ejs_arch_state,
+
+       .halt = arm7_9_halt,
+       .resume = arm7_9_resume,
+       .step = arm7_9_step,
+
+       .assert_reset = arm7_9_assert_reset,
+       .deassert_reset = arm7_9_deassert_reset,
+       .soft_reset_halt = arm926ejs_soft_reset_halt,
+       
+       .get_gdb_reg_list = armv4_5_get_gdb_reg_list,
+
+       .read_memory = arm7_9_read_memory,
+       .write_memory = arm926ejs_write_memory,
+       .bulk_write_memory = arm7_9_bulk_write_memory,
+
+       .run_algorithm = armv4_5_run_algorithm,
+
+       .add_breakpoint = arm7_9_add_breakpoint,
+       .remove_breakpoint = arm7_9_remove_breakpoint,
+       .add_watchpoint = arm7_9_add_watchpoint,
+       .remove_watchpoint = arm7_9_remove_watchpoint,
+
+       .register_commands = arm926ejs_register_commands,
+       .target_command = arm926ejs_target_command,
+       .init_target = arm926ejs_init_target,
+       .quit = arm926ejs_quit
+};
+
+int arm926ejs_read_cp15(target_t *target, u32 address, u32 *value)
+{
+       armv4_5_common_t *armv4_5 = target->arch_info;
+       arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+       arm_jtag_t *jtag_info = &arm7_9->jtag_info;
+       scan_field_t fields[4];
+       u8 address_buf[2];
+       u8 nr_w_buf = 0;
+       u8 access = 1;
+       
+       buf_set_u32(address_buf, 0, 14, address);
+       
+       jtag_add_end_state(TAP_RTI);
+       arm_jtag_scann(jtag_info, 0xf);
+       arm_jtag_set_instr(jtag_info, jtag_info->intest_instr);
+
+       fields[0].device = jtag_info->chain_pos;
+       fields[0].num_bits = 32;
+       fields[0].out_value = NULL;
+       fields[0].out_mask = NULL;
+       fields[0].in_value = NULL;
+       fields[0].in_check_value = NULL;
+       fields[0].in_check_mask = NULL;
+       fields[0].in_handler = NULL;
+       fields[0].in_handler_priv = NULL;
+
+       fields[1].device = jtag_info->chain_pos;
+       fields[1].num_bits = 1;
+       fields[1].out_value = &access;
+       fields[1].out_mask = NULL;
+       fields[1].in_value = &access;
+       fields[1].in_check_value = NULL;
+       fields[1].in_check_mask = NULL;
+       fields[1].in_handler = NULL;
+       fields[1].in_handler_priv = NULL;
+
+       fields[2].device = jtag_info->chain_pos;
+       fields[2].num_bits = 14;
+       fields[2].out_value = address_buf;
+       fields[2].out_mask = NULL;
+       fields[2].in_value = NULL;
+       fields[2].in_check_value = NULL;
+       fields[2].in_check_mask = NULL;
+       fields[2].in_handler = NULL;
+       fields[2].in_handler_priv = NULL;
+
+       fields[3].device = jtag_info->chain_pos;
+       fields[3].num_bits = 1;
+       fields[3].out_value = &nr_w_buf;
+       fields[3].out_mask = NULL;
+       fields[3].in_value = NULL;
+       fields[3].in_check_value = NULL;
+       fields[3].in_check_mask = NULL;
+       fields[3].in_handler = NULL;
+       fields[3].in_handler_priv = NULL;
+       
+       jtag_add_dr_scan(4, fields, -1);
+
+       /* rescan with NOP, to wait for the access to complete */
+       access = 0;
+       
+       fields[0].in_handler_priv = value;
+       fields[0].in_handler = arm_jtag_buf_to_u32;
+       
+       do
+       {
+               jtag_add_dr_scan(4, fields, -1);
+               jtag_execute_queue();
+       } while ((access & 1) != 1);
+
+#ifdef _DEBUG_INSTRUCTION_EXECUTION_
+       DEBUG("addr: 0x%x value: %8.8x", address, *value);
+#endif
+
+       return ERROR_OK;
+}
+
+int arm926ejs_write_cp15(target_t *target, u32 address, u32 value)
+{
+       armv4_5_common_t *armv4_5 = target->arch_info;
+       arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+       arm_jtag_t *jtag_info = &arm7_9->jtag_info;
+       scan_field_t fields[4];
+       u8 value_buf[4];
+       u8 address_buf[2];
+       u8 nr_w_buf = 1;
+       u8 access = 1;
+       
+       buf_set_u32(address_buf, 0, 14, address);
+       buf_set_u32(value_buf, 0, 32, value);
+       
+       jtag_add_end_state(TAP_RTI);
+       arm_jtag_scann(jtag_info, 0xf);
+       arm_jtag_set_instr(jtag_info, jtag_info->intest_instr);
+
+       fields[0].device = jtag_info->chain_pos;
+       fields[0].num_bits = 32;
+       fields[0].out_value = value_buf;
+       fields[0].out_mask = NULL;
+       fields[0].in_value = NULL;
+       fields[0].in_check_value = NULL;
+       fields[0].in_check_mask = NULL;
+       fields[0].in_handler = NULL;
+       fields[0].in_handler_priv = NULL;
+
+       fields[1].device = jtag_info->chain_pos;
+       fields[1].num_bits = 1;
+       fields[1].out_value = &access;
+       fields[1].out_mask = NULL;
+       fields[1].in_value = &access;
+       fields[1].in_check_value = NULL;
+       fields[1].in_check_mask = NULL;
+       fields[1].in_handler = NULL;
+       fields[1].in_handler_priv = NULL;
+
+       fields[2].device = jtag_info->chain_pos;
+       fields[2].num_bits = 14;
+       fields[2].out_value = address_buf;
+       fields[2].out_mask = NULL;
+       fields[2].in_value = NULL;
+       fields[2].in_check_value = NULL;
+       fields[2].in_check_mask = NULL;
+       fields[2].in_handler = NULL;
+       fields[2].in_handler_priv = NULL;
+
+       fields[3].device = jtag_info->chain_pos;
+       fields[3].num_bits = 1;
+       fields[3].out_value = &nr_w_buf;
+       fields[3].out_mask = NULL;
+       fields[3].in_value = NULL;
+       fields[3].in_check_value = NULL;
+       fields[3].in_check_mask = NULL;
+       fields[3].in_handler = NULL;
+       fields[3].in_handler_priv = NULL;
+       
+       jtag_add_dr_scan(4, fields, -1);
+
+       /* rescan with NOP, to wait for the access to complete */
+       access = 0;
+       
+       do
+       {
+               jtag_add_dr_scan(4, fields, -1);
+               jtag_execute_queue();
+       } while (access != 1);
+
+#ifdef _DEBUG_INSTRUCTION_EXECUTION_
+       DEBUG("addr: 0x%x value: %8.8x", address, value);
+#endif
+
+       return ERROR_OK;
+}
+
+int arm926ejs_examine_debug_reason(target_t *target)
+{
+       armv4_5_common_t *armv4_5 = target->arch_info;
+       arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+       reg_t *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
+       int debug_reason;
+       int retval;
+
+       embeddedice_read_reg(dbg_stat);
+       if ((retval = jtag_execute_queue()) != ERROR_OK)
+               return retval;
+       
+       debug_reason = buf_get_u32(dbg_stat->value, 6, 4);
+       
+       switch (debug_reason)
+       {
+               case 1:
+                       DEBUG("breakpoint from EICE unit 0");
+                       target->debug_reason = DBG_REASON_BREAKPOINT;
+                       break;
+               case 2:
+                       DEBUG("breakpoint from EICE unit 1");
+                       target->debug_reason = DBG_REASON_BREAKPOINT;
+                       break;
+               case 3:
+                       DEBUG("soft breakpoint (BKPT instruction)");
+                       target->debug_reason = DBG_REASON_BREAKPOINT;
+                       break;
+               case 4:
+                       DEBUG("vector catch breakpoint");
+                       target->debug_reason = DBG_REASON_BREAKPOINT;
+                       break;
+               case 5:
+                       DEBUG("external breakpoint");
+                       target->debug_reason = DBG_REASON_BREAKPOINT;
+                       break;
+               case 6:
+                       DEBUG("watchpoint from EICE unit 0");
+                       target->debug_reason = DBG_REASON_WATCHPOINT;
+                       break;
+               case 7:
+                       DEBUG("watchpoint from EICE unit 1");
+                       target->debug_reason = DBG_REASON_WATCHPOINT;
+                       break;
+               case 8:
+                       DEBUG("external watchpoint");
+                       target->debug_reason = DBG_REASON_WATCHPOINT;
+                       break;
+               case 9:
+                       DEBUG("internal debug request");
+                       target->debug_reason = DBG_REASON_DBGRQ;
+                       break;
+               case 10:
+                       DEBUG("external debug request");
+                       target->debug_reason = DBG_REASON_DBGRQ;
+                       break;
+               case 11:
+                       ERROR("BUG: debug re-entry from system speed access shouldn't be handled here");
+                       break;
+               default:
+                       ERROR("BUG: unknown debug reason: 0x%x", debug_reason);
+                       target->debug_reason = DBG_REASON_DBGRQ;
+       }
+       
+       return ERROR_OK;
+}
+
+u32 arm926ejs_get_ttb(target_t *target)
+{
+       int retval;
+       u32 ttb = 0x0;
+
+       if ((retval = arm926ejs_read_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 2, 0), &ttb)) != ERROR_OK)
+               return retval;
+
+       return ttb;
+}
+
+void arm926ejs_disable_mmu_caches(target_t *target, int mmu, int d_u_cache, int i_cache)
+{
+       u32 cp15_control;
+
+       /* read cp15 control register */
+       arm926ejs_read_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 1, 0), &cp15_control);
+       jtag_execute_queue();
+       
+       if (mmu)
+       {
+               /* invalidate TLB */
+               arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 8, 7), 0x0);
+               
+               cp15_control &= ~0x1U;
+       }
+       
+       if (d_u_cache)
+       {
+               u32 debug_override;
+               /* read-modify-write CP15 debug override register 
+                * to enable "test and clean all" */
+               arm926ejs_read_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 15, 0), &debug_override);
+               debug_override |= 0x80000;
+               arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 15, 0), debug_override);
+               
+               /* clean and invalidate DCache */
+               arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 7, 5), 0x0);
+
+               /* write CP15 debug override register 
+                * to disable "test and clean all" */
+               debug_override &= ~0x80000;
+               arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 15, 0), debug_override);
+               
+               cp15_control &= ~0x4U;
+       }
+       
+       if (i_cache)
+       {
+               /* invalidate ICache */
+               arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 7, 5), 0x0);
+               
+               cp15_control &= ~0x1000U;
+       }
+       
+       arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 1, 0), cp15_control);
+}
+
+void arm926ejs_enable_mmu_caches(target_t *target, int mmu, int d_u_cache, int i_cache)
+{
+       u32 cp15_control;
+
+       /* read cp15 control register */
+       arm926ejs_read_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 1, 0), &cp15_control);
+       jtag_execute_queue();
+               
+       if (mmu)
+               cp15_control |= 0x1U;
+       
+       if (d_u_cache)
+               cp15_control |= 0x4U;
+       
+       if (i_cache)
+               cp15_control |= 0x1000U;
+       
+       arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 1, 0), cp15_control);
+}
+
+void arm926ejs_post_debug_entry(target_t *target)
+{
+       armv4_5_common_t *armv4_5 = target->arch_info;
+       arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+       arm9tdmi_common_t *arm9tdmi = arm7_9->arch_info;
+       arm926ejs_common_t *arm926ejs = arm9tdmi->arch_info;
+       
+       /* examine cp15 control reg */
+       arm926ejs_read_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 1, 0), &arm926ejs->cp15_control_reg);
+       jtag_execute_queue();
+       DEBUG("cp15_control_reg: %8.8x", arm926ejs->cp15_control_reg);
+
+       if (arm926ejs->armv4_5_mmu.armv4_5_cache.ctype == -1)
+       {
+               u32 cache_type_reg;
+               /* identify caches */
+               arm926ejs_read_cp15(target, ARM926EJS_CP15_ADDR(0, 1, 0, 0), &cache_type_reg);
+               jtag_execute_queue();
+               armv4_5_identify_cache(cache_type_reg, &arm926ejs->armv4_5_mmu.armv4_5_cache);
+       }
+
+       arm926ejs->armv4_5_mmu.mmu_enabled = (arm926ejs->cp15_control_reg & 0x1U) ? 1 : 0;
+       arm926ejs->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled = (arm926ejs->cp15_control_reg & 0x4U) ? 1 : 0;
+       arm926ejs->armv4_5_mmu.armv4_5_cache.i_cache_enabled = (arm926ejs->cp15_control_reg & 0x1000U) ? 1 : 0;
+
+       /* save i/d fault status and address register */
+       arm926ejs_read_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 5, 0), &arm926ejs->d_fsr);
+       arm926ejs_read_cp15(target, ARM926EJS_CP15_ADDR(0, 1, 5, 0), &arm926ejs->i_fsr);
+       arm926ejs_read_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 6, 0), &arm926ejs->d_far);
+       
+       DEBUG("D FSR: 0x%8.8x, D FAR: 0x%8.8x, I FSR: 0x%8.8x",
+               arm926ejs->d_fsr, arm926ejs->d_far, arm926ejs->i_fsr);  
+
+
+       u32 cache_dbg_ctrl;
+       
+       /* read-modify-write CP15 cache debug control register 
+        * to disable I/D-cache linefills and force WT */
+       arm926ejs_read_cp15(target, ARM926EJS_CP15_ADDR(7, 0, 15, 0), &cache_dbg_ctrl);
+       cache_dbg_ctrl |= 0x7;
+       arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(7, 0, 15, 0), cache_dbg_ctrl);
+
+}
+
+void arm926ejs_pre_restore_context(target_t *target)
+{
+       armv4_5_common_t *armv4_5 = target->arch_info;
+       arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+       arm9tdmi_common_t *arm9tdmi = arm7_9->arch_info;
+       arm926ejs_common_t *arm926ejs = arm9tdmi->arch_info;
+       
+       /* restore i/d fault status and address register */
+       arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 5, 0), arm926ejs->d_fsr);
+       arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(0, 1, 5, 0), arm926ejs->i_fsr);
+       arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 6, 0), arm926ejs->d_far);
+       
+       u32 cache_dbg_ctrl;
+       
+       /* read-modify-write CP15 cache debug control register 
+        * to reenable I/D-cache linefills and disable WT */
+       arm926ejs_read_cp15(target, ARM926EJS_CP15_ADDR(7, 0, 15, 0), &cache_dbg_ctrl);
+       cache_dbg_ctrl |= 0x7;
+       arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(7, 0, 15, 0), cache_dbg_ctrl);
+}
+
+int arm926ejs_get_arch_pointers(target_t *target, armv4_5_common_t **armv4_5_p, arm7_9_common_t **arm7_9_p, arm9tdmi_common_t **arm9tdmi_p, arm926ejs_common_t **arm926ejs_p)
+{
+       armv4_5_common_t *armv4_5 = target->arch_info;
+       arm7_9_common_t *arm7_9;
+       arm9tdmi_common_t *arm9tdmi;
+       arm926ejs_common_t *arm926ejs;
+       
+       if (armv4_5->common_magic != ARMV4_5_COMMON_MAGIC)
+       {
+               return -1;
+       }
+       
+       arm7_9 = armv4_5->arch_info;
+       if (arm7_9->common_magic != ARM7_9_COMMON_MAGIC)
+       {
+               return -1;
+       }
+       
+       arm9tdmi = arm7_9->arch_info;
+       if (arm9tdmi->common_magic != ARM9TDMI_COMMON_MAGIC)
+       {
+               return -1;
+       }
+       
+       arm926ejs = arm9tdmi->arch_info;
+       if (arm926ejs->common_magic != ARM926EJS_COMMON_MAGIC)
+       {
+               return -1;
+       }
+       
+       *armv4_5_p = armv4_5;
+       *arm7_9_p = arm7_9;
+       *arm9tdmi_p = arm9tdmi;
+       *arm926ejs_p = arm926ejs;
+       
+       return ERROR_OK;
+}
+
+int arm926ejs_arch_state(struct target_s *target, char *buf, int buf_size)
+{
+       armv4_5_common_t *armv4_5 = target->arch_info;
+       arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+       arm9tdmi_common_t *arm9tdmi = arm7_9->arch_info;
+       arm926ejs_common_t *arm926ejs = arm9tdmi->arch_info;
+       
+       char *state[] = 
+       {
+               "disabled", "enabled"
+       };
+       
+       if (armv4_5->common_magic != ARMV4_5_COMMON_MAGIC)
+       {
+               ERROR("BUG: called for a non-ARMv4/5 target");
+               exit(-1);
+       }
+       
+       snprintf(buf, buf_size,
+                       "target halted in %s state due to %s, current mode: %s\n"
+                       "cpsr: 0x%8.8x pc: 0x%8.8x\n"
+                       "MMU: %s, D-Cache: %s, I-Cache: %s",
+                        armv4_5_state_strings[armv4_5->core_state],
+                        target_debug_reason_strings[target->debug_reason],
+                        armv4_5_mode_strings[armv4_5_mode_to_number(armv4_5->core_mode)],
+                        buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32),
+                        buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32),
+                        state[arm926ejs->armv4_5_mmu.mmu_enabled],
+                        state[arm926ejs->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled], 
+                        state[arm926ejs->armv4_5_mmu.armv4_5_cache.i_cache_enabled]);
+       
+       return ERROR_OK;
+}
+
+int arm926ejs_soft_reset_halt(struct target_s *target)
+{
+       armv4_5_common_t *armv4_5 = target->arch_info;
+       arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+       arm9tdmi_common_t *arm9tdmi = arm7_9->arch_info;
+       arm926ejs_common_t *arm926ejs = arm9tdmi->arch_info;
+       reg_t *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
+       
+       if (target->state == TARGET_RUNNING)
+       {
+               target->type->halt(target);
+       }
+       
+       while (buf_get_u32(dbg_stat->value, EICE_DBG_CONTROL_DBGACK, 1) == 0)
+       {
+               embeddedice_read_reg(dbg_stat);
+               jtag_execute_queue();
+       }
+       
+       target->state = TARGET_HALTED;
+       
+       /* SVC, ARM state, IRQ and FIQ disabled */
+       buf_set_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8, 0xd3);
+       armv4_5->core_cache->reg_list[ARMV4_5_CPSR].dirty = 1;
+       armv4_5->core_cache->reg_list[ARMV4_5_CPSR].valid = 1;
+       
+       /* start fetching from 0x0 */
+       buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, 0x0);
+       armv4_5->core_cache->reg_list[15].dirty = 1;
+       armv4_5->core_cache->reg_list[15].valid = 1;
+       
+       armv4_5->core_mode = ARMV4_5_MODE_SVC;
+       armv4_5->core_state = ARMV4_5_STATE_ARM;
+       
+       arm926ejs_disable_mmu_caches(target, 1, 1, 1);
+       arm926ejs->armv4_5_mmu.mmu_enabled = 0;
+       arm926ejs->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled = 0;
+       arm926ejs->armv4_5_mmu.armv4_5_cache.i_cache_enabled = 0;
+
+       target_call_event_callbacks(target, TARGET_EVENT_HALTED);
+       
+       return ERROR_OK;
+}
+
+int arm926ejs_write_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer)
+{
+       int retval;
+       armv4_5_common_t *armv4_5 = target->arch_info;
+       arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+       arm9tdmi_common_t *arm9tdmi = arm7_9->arch_info;
+       arm926ejs_common_t *arm926ejs = arm9tdmi->arch_info;
+       
+       if ((retval = arm7_9_write_memory(target, address, size, count, buffer)) != ERROR_OK)
+               return retval;
+
+       /* If ICache is enabled, we have to invalidate affected ICache lines
+        * the DCache is forced to write-through, so we don't have to clean it here
+        */
+       if (arm926ejs->armv4_5_mmu.armv4_5_cache.i_cache_enabled)
+       {
+               if (count <= 1)
+               {
+                       /* invalidate ICache single entry with MVA */
+                       arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(0, 1, 7, 5), address);
+               }
+               else
+               {
+                       /* invalidate ICache */
+                       arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(0, 0, 7, 5), address);
+               }
+       }
+
+       return retval;
+}
+
+int arm926ejs_init_target(struct command_context_s *cmd_ctx, struct target_s *target)
+{
+       arm9tdmi_init_target(cmd_ctx, target);
+               
+       return ERROR_OK;
+       
+}
+
+int arm926ejs_quit()
+{
+       
+       return ERROR_OK;
+}
+
+int arm926ejs_init_arch_info(target_t *target, arm926ejs_common_t *arm926ejs, int chain_pos, char *variant)
+{
+       arm9tdmi_common_t *arm9tdmi = &arm926ejs->arm9tdmi_common;
+       arm7_9_common_t *arm7_9 = &arm9tdmi->arm7_9_common;
+       
+       /* initialize arm9tdmi specific info (including arm7_9 and armv4_5)
+        */
+       arm9tdmi_init_arch_info(target, arm9tdmi, chain_pos, variant);
+
+       arm9tdmi->arch_info = arm926ejs;
+       arm926ejs->common_magic = ARM926EJS_COMMON_MAGIC;
+       
+       arm7_9->post_debug_entry = arm926ejs_post_debug_entry;
+       arm7_9->pre_restore_context = arm926ejs_pre_restore_context;
+       
+       arm926ejs->armv4_5_mmu.armv4_5_cache.ctype = -1;
+       arm926ejs->armv4_5_mmu.get_ttb = arm926ejs_get_ttb;
+       arm926ejs->armv4_5_mmu.read_memory = arm7_9_read_memory;
+       arm926ejs->armv4_5_mmu.write_memory = arm7_9_write_memory;
+       arm926ejs->armv4_5_mmu.disable_mmu_caches = arm926ejs_disable_mmu_caches;
+       arm926ejs->armv4_5_mmu.enable_mmu_caches = arm926ejs_enable_mmu_caches;
+       arm926ejs->armv4_5_mmu.has_tiny_pages = 1;
+       arm926ejs->armv4_5_mmu.mmu_enabled = 0;
+       
+       arm7_9->examine_debug_reason = arm926ejs_examine_debug_reason;
+       
+       return ERROR_OK;
+}
+
+int arm926ejs_target_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct target_s *target)
+{
+       int chain_pos;
+       char *variant = NULL;
+       arm926ejs_common_t *arm926ejs = malloc(sizeof(arm926ejs_common_t));
+       
+       if (argc < 4)
+       {
+               ERROR("'target arm926ejs' requires at least one additional argument");
+               exit(-1);
+       }
+       
+       chain_pos = strtoul(args[3], NULL, 0);
+       
+       if (argc >= 5)
+               variant = args[4];
+       
+       DEBUG("chain_pos: %i, variant: %s", chain_pos, variant);
+       
+       arm926ejs_init_arch_info(target, arm926ejs, chain_pos, variant);
+
+       return ERROR_OK;
+}
+
+int arm926ejs_register_commands(struct command_context_s *cmd_ctx)
+{
+       int retval;
+       command_t *arm926ejs_cmd;
+       
+               
+       retval = arm9tdmi_register_commands(cmd_ctx);
+       
+       arm926ejs_cmd = register_command(cmd_ctx, NULL, "arm926ejs", NULL, COMMAND_ANY, "arm926ejs specific commands");
+
+       register_command(cmd_ctx, arm926ejs_cmd, "cp15", arm926ejs_handle_cp15_command, COMMAND_EXEC, "display/modify cp15 register <opcode_1> <opcode_2> <CRn> <CRm> [value]");
+       
+       register_command(cmd_ctx, arm926ejs_cmd, "cache_info", arm926ejs_handle_cache_info_command, COMMAND_EXEC, "display information about target caches");
+       register_command(cmd_ctx, arm926ejs_cmd, "virt2phys", arm926ejs_handle_virt2phys_command, COMMAND_EXEC, "translate va to pa <va>");
+
+       register_command(cmd_ctx, arm926ejs_cmd, "mdw_phys", arm926ejs_handle_md_phys_command, COMMAND_EXEC, "display memory words <physical addr> [count]");
+       register_command(cmd_ctx, arm926ejs_cmd, "mdh_phys", arm926ejs_handle_md_phys_command, COMMAND_EXEC, "display memory half-words <physical addr> [count]");
+       register_command(cmd_ctx, arm926ejs_cmd, "mdb_phys", arm926ejs_handle_md_phys_command, COMMAND_EXEC, "display memory bytes <physical addr> [count]");
+
+       register_command(cmd_ctx, arm926ejs_cmd, "mww_phys", arm926ejs_handle_mw_phys_command, COMMAND_EXEC, "write memory word <physical addr> <value>");
+       register_command(cmd_ctx, arm926ejs_cmd, "mwh_phys", arm926ejs_handle_mw_phys_command, COMMAND_EXEC, "write memory half-word <physical addr> <value>");
+       register_command(cmd_ctx, arm926ejs_cmd, "mwb_phys", arm926ejs_handle_mw_phys_command, COMMAND_EXEC, "write memory byte <physical addr> <value>");
+
+       return ERROR_OK;
+}
+
+int arm926ejs_handle_cp15_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+       int retval;
+       target_t *target = get_current_target(cmd_ctx);
+       armv4_5_common_t *armv4_5;
+       arm7_9_common_t *arm7_9;
+       arm9tdmi_common_t *arm9tdmi;
+       arm926ejs_common_t *arm926ejs;
+       int opcode_1 = strtoul(args[0], NULL, 0);
+       int opcode_2 = strtoul(args[1], NULL, 0);
+       int CRn = strtoul(args[2], NULL, 0);
+       int CRm = strtoul(args[3], NULL, 0);
+
+       if (arm926ejs_get_arch_pointers(target, &armv4_5, &arm7_9, &arm9tdmi, &arm926ejs) != ERROR_OK)
+       {
+               command_print(cmd_ctx, "current target isn't an ARM926EJ-S target");
+               return ERROR_OK;
+       }
+       
+       if (target->state != TARGET_HALTED)
+       {
+               command_print(cmd_ctx, "target must be stopped for \"%s\" command", cmd);
+               return ERROR_OK;
+       }
+       
+       if ((argc < 4) || (argc > 5))
+       {
+               command_print(cmd_ctx, "usage: arm926ejs cp15 <opcode_1> <opcode_2> <CRn> <CRm> [value]");
+       }
+
+       if (argc == 4)
+       {
+               u32 value;
+               if ((retval = arm926ejs_read_cp15(target, ARM926EJS_CP15_ADDR(opcode_1, opcode_2, CRn, CRm), &value)) != ERROR_OK)
+               {
+                       command_print(cmd_ctx, "couldn't access register");
+                       return ERROR_OK;
+               }
+               jtag_execute_queue();
+               
+               command_print(cmd_ctx, "%i %i %i %i: %8.8x", opcode_1, opcode_2, CRn, CRm, value);
+       }
+       else
+       {
+               u32 value = strtoul(args[4], NULL, 0);
+               if ((retval = arm926ejs_write_cp15(target, ARM926EJS_CP15_ADDR(opcode_1, opcode_2, CRn, CRm), value)) != ERROR_OK)
+               {
+                       command_print(cmd_ctx, "couldn't access register");
+                       return ERROR_OK;
+               }
+               command_print(cmd_ctx, "%i %i %i %i: %8.8x", opcode_1, opcode_2, CRn, CRm, value);
+       }
+
+       return ERROR_OK;
+}
+
+int arm926ejs_handle_cache_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+       target_t *target = get_current_target(cmd_ctx);
+       armv4_5_common_t *armv4_5;
+       arm7_9_common_t *arm7_9;
+       arm9tdmi_common_t *arm9tdmi;
+       arm926ejs_common_t *arm926ejs;
+       
+       if (arm926ejs_get_arch_pointers(target, &armv4_5, &arm7_9, &arm9tdmi, &arm926ejs) != ERROR_OK)
+       {
+               command_print(cmd_ctx, "current target isn't an ARM926EJ-S target");
+               return ERROR_OK;
+       }
+       
+       return armv4_5_handle_cache_info_command(cmd_ctx, &arm926ejs->armv4_5_mmu.armv4_5_cache);
+}
+
+int arm926ejs_handle_virt2phys_command(command_context_t *cmd_ctx, char *cmd, char **args, int argc)
+{      
+       target_t *target = get_current_target(cmd_ctx);
+       armv4_5_common_t *armv4_5;
+       arm7_9_common_t *arm7_9;
+       arm9tdmi_common_t *arm9tdmi;
+       arm926ejs_common_t *arm926ejs;
+       arm_jtag_t *jtag_info;
+
+       if (arm926ejs_get_arch_pointers(target, &armv4_5, &arm7_9, &arm9tdmi, &arm926ejs) != ERROR_OK)
+       {
+               command_print(cmd_ctx, "current target isn't an ARM926EJ-S target");
+               return ERROR_OK;
+       }
+       
+       jtag_info = &arm7_9->jtag_info;
+       
+       if (target->state != TARGET_HALTED)
+       {
+               command_print(cmd_ctx, "target must be stopped for \"%s\" command", cmd);
+               return ERROR_OK;
+       }
+               
+       return armv4_5_mmu_handle_virt2phys_command(cmd_ctx, cmd, args, argc, target, &arm926ejs->armv4_5_mmu);
+}
+
+int arm926ejs_handle_md_phys_command(command_context_t *cmd_ctx, char *cmd, char **args, int argc)
+{      
+       target_t *target = get_current_target(cmd_ctx);
+       armv4_5_common_t *armv4_5;
+       arm7_9_common_t *arm7_9;
+       arm9tdmi_common_t *arm9tdmi;
+       arm926ejs_common_t *arm926ejs;
+       arm_jtag_t *jtag_info;
+
+       if (arm926ejs_get_arch_pointers(target, &armv4_5, &arm7_9, &arm9tdmi, &arm926ejs) != ERROR_OK)
+       {
+               command_print(cmd_ctx, "current target isn't an ARM926EJ-S target");
+               return ERROR_OK;
+       }
+       
+       jtag_info = &arm7_9->jtag_info;
+       
+       if (target->state != TARGET_HALTED)
+       {
+               command_print(cmd_ctx, "target must be stopped for \"%s\" command", cmd);
+               return ERROR_OK;
+       }
+       
+       return armv4_5_mmu_handle_md_phys_command(cmd_ctx, cmd, args, argc, target, &arm926ejs->armv4_5_mmu);
+}
+
+int arm926ejs_handle_mw_phys_command(command_context_t *cmd_ctx, char *cmd, char **args, int argc)
+{      
+       target_t *target = get_current_target(cmd_ctx);
+       armv4_5_common_t *armv4_5;
+       arm7_9_common_t *arm7_9;
+       arm9tdmi_common_t *arm9tdmi;
+       arm926ejs_common_t *arm926ejs;
+       arm_jtag_t *jtag_info;
+
+       if (arm926ejs_get_arch_pointers(target, &armv4_5, &arm7_9, &arm9tdmi, &arm926ejs) != ERROR_OK)
+       {
+               command_print(cmd_ctx, "current target isn't an ARM926EJ-S target");
+               return ERROR_OK;
+       }
+       
+       jtag_info = &arm7_9->jtag_info;
+       
+       if (target->state != TARGET_HALTED)
+       {
+               command_print(cmd_ctx, "target must be stopped for \"%s\" command", cmd);
+               return ERROR_OK;
+       }
+       
+       return armv4_5_mmu_handle_mw_phys_command(cmd_ctx, cmd, args, argc, target, &arm926ejs->armv4_5_mmu);
+}
diff --git a/src/target/arm926ejs.h b/src/target/arm926ejs.h
new file mode 100644 (file)
index 0000000..1dff0f2
--- /dev/null
@@ -0,0 +1,44 @@
+/***************************************************************************
+ *   Copyright (C) 2007 by Dominic Rath                                    *
+ *   Dominic.Rath@gmx.de                                                   *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program; if not, write to the                         *
+ *   Free Software Foundation, Inc.,                                       *
+ *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ ***************************************************************************/
+#ifndef ARM926EJS_H
+#define ARM926EJS_H
+
+#include "target.h"
+#include "register.h"
+#include "embeddedice.h"
+#include "arm_jtag.h"
+#include "arm9tdmi.h"
+#include "armv4_5_mmu.h"
+#include "armv4_5_cache.h"
+
+#define        ARM926EJS_COMMON_MAGIC 0xa926a926
+
+typedef struct arm926ejs_common_s
+{
+       int common_magic;
+       armv4_5_mmu_common_t armv4_5_mmu;
+       arm9tdmi_common_t arm9tdmi_common;
+       u32 cp15_control_reg;
+       u32 d_fsr;
+       u32 i_fsr;
+       u32 d_far;
+} arm926ejs_common_t;
+
+#endif /* ARM926EJS_H */
index 8c6d97dfc6cbeec0259fe543e2c2cdb429127d93..e2e0530f7e37aee4e6ad2e2d2db6ae54c2830107 100644 (file)
@@ -76,6 +76,7 @@ extern target_type_t arm720t_target;
 extern target_type_t arm9tdmi_target;
 extern target_type_t arm920t_target;
 extern target_type_t arm966e_target;
+extern target_type_t arm926ejs_target;
 
 target_type_t *target_types[] =
 {
@@ -84,6 +85,7 @@ target_type_t *target_types[] =
        &arm920t_target,
        &arm720t_target,
        &arm966e_target,
+       &arm926ejs_target,
        NULL,
 };