]> git.sur5r.net Git - openocd/commitdiff
cfg: update ti/stellaris url's
authorSpencer Oliver <spen@spen-soft.co.uk>
Tue, 2 Oct 2012 13:33:06 +0000 (14:33 +0100)
committerFreddie Chopin <freddie.chopin@gmail.com>
Tue, 2 Oct 2012 21:59:48 +0000 (21:59 +0000)
Change-Id: I96f17c5ea2be506a6b88434616ca52c3e392868a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/879
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
tcl/board/ek-lm3s1968.cfg
tcl/board/ek-lm3s3748.cfg
tcl/board/ek-lm3s6965.cfg
tcl/board/ek-lm3s811-revb.cfg
tcl/board/ek-lm3s811.cfg
tcl/board/ek-lm3s9b9x.cfg

index e79452c796770d2e55a84340a6fbeac0632458ab..42f100feeb4cc436e41586c3c7b205da028b986e 100644 (file)
@@ -1,7 +1,8 @@
 #
 # TI/Luminary Stellaris LM3S1968 Evaluation Kits
 #
-# http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s1968
+#
 
 # NOTE:  to use J-Link instead of the on-board interface,
 # you may also need to reduce adapter_khz to be about 1200.
index 0ed1d5afa91b025cfcc4afc4a662ab264af44a11..c95c21a6da70cf7666b997e0b217dac56b9a093a 100644 (file)
@@ -1,5 +1,8 @@
-# Stellaris lm3s3748 Evaluation Kit
-#  http://www.luminarymicro.com/products/lm3s3748_usb_h_d_evaluation_kits.html
+#
+# TI/Luminary Stellaris lm3s3748 Evaluation Kits
+#
+# http://www.ti.com/tool/ek-lm3s3748
+#
 
 # NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
 # so is using it in JTAG mode, as done here.
index ae39d1fc1b495c0310f120996e53ff335254ed02..428e853533d57ac57ab2012558d1753f3ce678e9 100644 (file)
@@ -1,7 +1,8 @@
 #
 # TI/Luminary Stellaris LM3S6965 Evaluation Kits
 #
-# http://www.luminarymicro.com/products/lm3s6965_ethernet_evaluation_kit.html
+# http://www.ti.com/tool/ek-lm3s6965
+#
 
 # NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
 # so is using it in JTAG mode, as done here.
index fb145e4ffcdff3ffe8a011dedb7a6b977097ae75..82d1be432b53b7238cdfde75d083229b44e809ac 100644 (file)
@@ -1,7 +1,8 @@
 #
 # TI/Luminary Stellaris LM3S811 Evaluation Kits (rev B and earlier)
 #
-# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s811
+#
 
 # NOTE: newer 811-EK boards (rev C and above) shouldn't use this.
 # use board/ek-lm3s811.cfg
index db7324a72130172663180beba73712e24e6faba7..6ea66b38c11f2ee69abd7bbab1ef7154825170af 100644 (file)
@@ -1,7 +1,8 @@
 #
 # TI/Luminary Stellaris LM3S811 Evaluation Kits
 #
-# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s811
+#
 
 # NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
 # so is using it in JTAG mode, as done here.
index 2bc852962d892a2e31722d6e4348746bc0a019d6..1dd42315bc011847d105ebb3d6a0b932f35275a0 100644 (file)
@@ -1,8 +1,8 @@
 #
-# Luminary Micro Stellaris LM3S9B9x Evaluation Kits
+# TI/Luminary Stellaris LM3S9B9x Evaluation Kits
 #
-# http://www.luminarymicro.com/products/ek-lm3s9b90.html
-# http://www.luminarymicro.com/products/ek-lm3s9b92.html
+# http://www.ti.com/tool/ek-lm3s9b90
+# http://www.ti.com/tool/ek-lm3s9b92
 #
 
 # NOTE:  using the bundled FT2232 JTAG/SWD/SWO interface is optional!