Alan Carvalho de Assis <acassis@gmail.com> imx31pdk.cfg reset init event

git-svn-id: svn://svn.berlios.de/openocd/trunk@1322 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/src/target/board/imx31pdk.cfg b/src/target/board/imx31pdk.cfg
new file mode 100644 (file)
index 0000000..c6c423c
--- /dev/null
+++ b/src/target/board/imx31pdk.cfg
@@ -0,0 +1,101 @@
+# The IMX31PDK eval board has a single IMX31 chip\r
+source [find target/imx31.cfg]\r
+$_TARGETNAME configure -event gdb-attach { reset init }\r
+$_TARGETNAME configure -event reset-init { imx31pdk_init }\r
+\r
+proc imx31pdk_init { } {\r
+       # This setup puts RAM at 0x80000000\r
+\r
+       # reset the board correctly\r
+       reset run\r
+       reset halt\r
+\r
+       # ========================================\r
+       # Init CCM\r
+       # ========================================\r
+       mww 0x53FC0000 0x040\r
+       mww 0x53F80000 0x074B0B7D\r
+\r
+       sleep 100\r
+\r
+       # ========================================\r
+       # 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40\r
+       # ========================================\r
+       mww 0x53F80004 0xFF871D50\r
+       mww 0x53F80010 0x00271C1B\r
+\r
+       # ========================================\r
+       # Configure CPLD on CS5 \r
+       # ========================================\r
+       mww 0xb8002050 0x0000DCF6\r
+       mww 0xb8002054 0x444A4541\r
+       mww 0xb8002058 0x44443302\r
+\r
+       # ========================================\r
+       # SDCLK\r
+       # ========================================\r
+       mww 0x43FAC26C 0\r
+\r
+       # ========================================\r
+       # CAS\r
+       # ========================================\r
+       mww 0x43FAC270 0\r
+\r
+       # ========================================\r
+       # RAS\r
+       # ========================================\r
+       mww 0x43FAC274 0\r
+\r
+       # ========================================\r
+       # CS2 (CSD0)\r
+       # ========================================\r
+       mww 0x43FAC27C 0x1000\r
+\r
+       # ========================================\r
+       # DQM3\r
+       # ========================================\r
+       mww 0x43FAC284 0\r
+\r
+       # ========================================\r
+       # DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)\r
+       # ========================================\r
+       mww 0x43FAC288 0\r
+       mww 0x43FAC28C 0\r
+       mww 0x43FAC290 0\r
+       mww 0x43FAC294 0\r
+       mww 0x43FAC298 0\r
+       mww 0x43FAC29C 0\r
+       mww 0x43FAC2A0 0\r
+       mww 0x43FAC2A4 0\r
+       mww 0x43FAC2A8 0\r
+       mww 0x43FAC2AC 0\r
+       mww 0x43FAC2B0 0\r
+       mww 0x43FAC2B4 0\r
+       mww 0x43FAC2B8 0\r
+       mww 0x43FAC2BC 0\r
+       mww 0x43FAC2C0 0\r
+       mww 0x43FAC2C4 0\r
+       mww 0x43FAC2C8 0\r
+       mww 0x43FAC2CC 0\r
+       mww 0x43FAC2D0 0\r
+       mww 0x43FAC2D4 0\r
+       mww 0x43FAC2D8 0\r
+       mww 0x43FAC2DC 0\r
+\r
+       # ========================================\r
+       # Initialization script for 32 bit DDR on MX31 PDK\r
+       # ========================================\r
+       mww 0xB8001010 0x00000004\r
+       mww 0xB8001004 0x006ac73a\r
+       mww 0xB8001000 0x92100000\r
+       mww 0x80000f00 0x12344321\r
+       mww 0xB8001000 0xa2100000\r
+       mww 0x80000000 0x12344321\r
+       mww 0x80000000 0x12344321\r
+       mww 0xB8001000 0xb2100000\r
+       mwb 0x80000033 0xda\r
+       mwb 0x81000000 0xff\r
+       mww 0xB8001000 0x82226080\r
+       mww 0x80000000 0xDEADBEEF\r
+       mww 0xB8001010 0x0000000c\r
+}\r

diff --git a/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk b/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk
index 5b78daa261b1c8e6abde206815972fbede81e3a3..304a8d8992f011075e4ea82b0cdf87a0f0084d9f 100644 (file)
--- a/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk
+++ b/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk
@@ -1,4 +1,8 @@
-echo Setting up for the FreeScale iMX31 Board.\n
+echo Script to load ledtest on iMX31PDK.\n
+
+# Note: you need to startup openocd with "-f board/imx31pdk.cfg"
+# in order to it initialize RAM memory.
+
 # SETUP GDB :
 #
 # Common gdb setup for ARM CPUs
@@ -9,104 +13,8 @@ set prompt (arm-gdb)
 set endian little
 dir .
 
-# DEFINE MACROS        :
-#
-# Create a "refresh" macro to update gdb's screens after the cpu
-# has been stopped by the other CPU or following an "monitor allstop"
-define refresh
-       monitor set hbreak
-       cont
-       monitor clear hbreak
-end
-
 # CONNECT TO TARGET :
 target remote 127.0.0.1:3333
-monitor reset run
-#FIX!!!! should be reset init!
-monitor reset halt
-
-# iMX31 PDK board initialization commands:
-
-#// init_ccm
-
-monitor mww 0x53FC0000 0x040
-monitor mww 0x53F80000 0x074B0B7D
-
-#//532-133-66.5
-#//monitor mww 0x53F80004 0xFF871D58
-#//monitor mww 0x53F80010 0x0033280C
-
-#// 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
-monitor mww 0x53F80004 0xFF871D50
-monitor mww 0x53F80010 0x00271C1B
-
-#// 208-104-52
-#//monitor mww 0x53F80004 0xFF871D48
-#//monitor mww 0x53F80010 0x04002000
-
-#// Configure CPLD on CS5 
-monitor mww 0xb8002050 0x0000DCF6
-monitor mww 0xb8002054 0x444A4541
-monitor mww 0xb8002058 0x44443302
-
-#// Disable maximum drive strength for SDRAM/DDR lines by clearing DSE1 bits
-#// in SW_PAD_CTL registers
-
-#// SDCLK
-monitor mww 0x43FAC26C 0
-
-#// CAS
-monitor mww 0x43FAC270 0
-
-#// RAS
-monitor mww 0x43FAC274 0
-
-#// CS2 (CSD0)
-monitor mww 0x43FAC27C 0x1000
-
-#// DQM3
-monitor mww 0x43FAC284 0
-
-#// DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)
-monitor mww 0x43FAC288 0
-monitor mww 0x43FAC28C 0
-monitor mww 0x43FAC290 0
-monitor mww 0x43FAC294 0
-monitor mww 0x43FAC298 0
-monitor mww 0x43FAC29C 0
-monitor mww 0x43FAC2A0 0
-monitor mww 0x43FAC2A4 0
-monitor mww 0x43FAC2A8 0
-monitor mww 0x43FAC2AC 0
-monitor mww 0x43FAC2B0 0
-monitor mww 0x43FAC2B4 0
-monitor mww 0x43FAC2B8 0
-monitor mww 0x43FAC2BC 0
-monitor mww 0x43FAC2C0 0
-monitor mww 0x43FAC2C4 0
-monitor mww 0x43FAC2C8 0
-monitor mww 0x43FAC2CC 0
-monitor mww 0x43FAC2D0 0
-monitor mww 0x43FAC2D4 0
-monitor mww 0x43FAC2D8 0
-monitor mww 0x43FAC2DC 0
-
-#// Initialization script for 32 bit DDR on MX31 PDK
-monitor mww 0xB8001010 0x00000004
-monitor mww 0xB8001004 0x006ac73a
-monitor mww 0xB8001000 0x92100000
-monitor mww 0x80000f00 0x12344321
-monitor mww 0xB8001000 0xa2100000
-monitor mww 0x80000000 0x12344321
-monitor mww 0x80000000 0x12344321
-monitor mww 0xB8001000 0xb2100000
-#monitor char 0x80000033 0xda
-monitor mwb 0x80000033 0xda
-#monitor char 0x81000000 0xff
-monitor mwb 0x81000000 0xff
-monitor mww 0xB8001000 0x82226080
-monitor mww 0x80000000 0xDEADBEEF
-monitor mww 0xB8001010 0x0000000c
 
 #  LOAD IMAGE :
 #