cfg: Add config file variants using the ftdi driver instead of ft2232

part 4 - files that are currently untested

Change-Id: Ic4a08fdefc99e7a9d50885c888c3fca60ffa39bd
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/750
Tested-by: jenkins

diff --git a/tcl/interface/ftdi/axm0432.cfg b/tcl/interface/ftdi/axm0432.cfg
new file mode 100644 (file)
index 0000000..0c24a33
--- /dev/null
+++ b/tcl/interface/ftdi/axm0432.cfg
@@ -0,0 +1,18 @@
+#
+# Axiom axm0432
+#
+# http://www.axman.com
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "Symphony SoundBite"
+ftdi_vid_pid 0x0403 0x6010
+
+ftdi_layout_init 0x0c08 0x0c2b
+ftdi_layout_signal nTRST -data 0x0800
+ftdi_layout_signal nSRST -data 0x0400

diff --git a/tcl/interface/ftdi/cortino.cfg b/tcl/interface/ftdi/cortino.cfg
new file mode 100644 (file)
index 0000000..d4f83f1
--- /dev/null
+++ b/tcl/interface/ftdi/cortino.cfg
@@ -0,0 +1,18 @@
+#
+# Hitex Cortino
+#
+# http://www.hitex.com/index.php?id=cortino
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "Cortino"
+ftdi_vid_pid 0x0640 0x0032
+
+ftdi_layout_init 0x0308 0x031b
+ftdi_layout_signal nTRST -data 0x0100
+ftdi_layout_signal nSRST -data 0x0200

diff --git a/tcl/interface/ftdi/flossjtag-noeeprom.cfg b/tcl/interface/ftdi/flossjtag-noeeprom.cfg
new file mode 100644 (file)
index 0000000..18046e7
--- /dev/null
+++ b/tcl/interface/ftdi/flossjtag-noeeprom.cfg
@@ -0,0 +1,26 @@
+#
+# FlossJTAG
+#
+# http://github.com/esden/floss-jtag
+#
+# This is the pre v0.3 Floss-JTAG compatible config file. It can also be used
+# for newer versions of Floss-JTAG with empty or not populated EEPROM. If you
+# have several Floss-JTAG connected you have to use the USB ID to select a
+# specific one.
+#
+# If you have a Floss-JTAG WITH EEPROM that is programmed, use the
+# flossjtag.cfg file.
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "Dual RS232-HS"
+ftdi_vid_pid 0x0403 0x6010
+
+ftdi_layout_init 0x0008 0x000b
+ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
+ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040

diff --git a/tcl/interface/ftdi/flossjtag.cfg b/tcl/interface/ftdi/flossjtag.cfg
new file mode 100644 (file)
index 0000000..13e1f0b
--- /dev/null
+++ b/tcl/interface/ftdi/flossjtag.cfg
@@ -0,0 +1,29 @@
+#
+# FlossJTAG
+#
+# http://github.com/esden/floss-jtag
+#
+# This is the v0.3 and v1.0 Floss-JTAG compatible config file. It relies on the
+# existence of an EEPROM on Floss-JTAG containing a name. If you have several
+# Floss-JTAG adapters connected you can use the serial number to select a
+# specific device.
+#
+# If your Floss-JTAG does not have an EEPROM, or the EEPROM is empty, use the
+# flossjtag-noeeprom.cfg file.
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_vid_pid 0x0403 0x6010
+ftdi_device_desc "FLOSS-JTAG"
+#ftdi_serial "FJ000001"
+
+ftdi_layout_init 0x0008 0x180b
+ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
+ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040
+ftdi_layout_signal LED -data 0x0800
+ftdi_layout_signal LED2 -data 0x1000

diff --git a/tcl/interface/ftdi/flyswatter2.cfg b/tcl/interface/ftdi/flyswatter2.cfg
new file mode 100644 (file)
index 0000000..7d57e43
--- /dev/null
+++ b/tcl/interface/ftdi/flyswatter2.cfg
@@ -0,0 +1,18 @@
+#
+# TinCanTools Flyswatter 2
+#
+# http://www.tincantools.com/product.php?productid=16134
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "Flyswatter2"
+ftdi_vid_pid 0x0403 0x6010
+
+ftdi_layout_init 0x0818 0x017b
+ftdi_layout_signal nTRST -data 0x0010
+ftdi_layout_signal nSRST -noe 0x0020

diff --git a/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg b/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg
new file mode 100644 (file)
index 0000000..b682333
--- /dev/null
+++ b/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg
@@ -0,0 +1,18 @@
+#
+# Hilscher NXHX 10-ETM
+#
+# http://de.hilscher.com/products_details_hardware.html?p_id=P_4ce145a5983e6
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "NXHX 10-ETM"
+ftdi_vid_pid 0x0640 0x0028
+
+ftdi_layout_init 0x0308 0x030b
+ftdi_layout_signal nTRST -data 0x0100
+ftdi_layout_signal nSRST -data 0x0200

diff --git a/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg b/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg
new file mode 100644 (file)
index 0000000..3483030
--- /dev/null
+++ b/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg
@@ -0,0 +1,18 @@
+#
+# Hilscher NXHX 500-ETM
+#
+# http://de.hilscher.com/files_design/8/NXHX500-ETM_description_Rev01_EN.pdf
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "NXHX 500-ETM"
+ftdi_vid_pid 0x0640 0x0028
+
+ftdi_layout_init 0x0308 0x030b
+ftdi_layout_signal nTRST -data 0x0100
+ftdi_layout_signal nSRST -data 0x0200

diff --git a/tcl/interface/ftdi/hilscher_nxhx500_re.cfg b/tcl/interface/ftdi/hilscher_nxhx500_re.cfg
new file mode 100644 (file)
index 0000000..b4cada0
--- /dev/null
+++ b/tcl/interface/ftdi/hilscher_nxhx500_re.cfg
@@ -0,0 +1,18 @@
+#
+# Hilscher NXHX 500-RE
+#
+# http://de.hilscher.com/products_details_hardware.html?p_id=P_461ff2053bad1&bs=20
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "NXHX 500-RE"
+ftdi_vid_pid 0x0640 0x0028
+
+ftdi_layout_init 0x0308 0x030b
+ftdi_layout_signal nTRST -data 0x0100
+ftdi_layout_signal nSRST -data 0x0200

diff --git a/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg b/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg
new file mode 100644 (file)
index 0000000..67074a2
--- /dev/null
+++ b/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg
@@ -0,0 +1,18 @@
+#
+# Hilscher NXHX 50-ETM
+#
+# http://de.hilscher.com/files_design/8/NXHX50-ETM_description_Rev01_EN.pdf
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "NXHX 50-ETM"
+ftdi_vid_pid 0x0640 0x0028
+
+ftdi_layout_init 0x0308 0x030b
+ftdi_layout_signal nTRST -data 0x0100
+ftdi_layout_signal nSRST -data 0x0200

diff --git a/tcl/interface/ftdi/hilscher_nxhx50_re.cfg b/tcl/interface/ftdi/hilscher_nxhx50_re.cfg
new file mode 100644 (file)
index 0000000..966dcd8
--- /dev/null
+++ b/tcl/interface/ftdi/hilscher_nxhx50_re.cfg
@@ -0,0 +1,18 @@
+#
+# Hilscher NXHX 50-RE
+#
+# http://de.hilscher.com/products_details_hardware.html?p_id=P_483c0f582ad36&bs=20
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "NXHX50-RE"
+ftdi_vid_pid 0x0640 0x0028
+
+ftdi_layout_init 0x0308 0x030b
+ftdi_layout_signal nTRST -data 0x0100
+ftdi_layout_signal nSRST -data 0x0200

diff --git a/tcl/interface/ftdi/hitex_str9-comstick.cfg b/tcl/interface/ftdi/hitex_str9-comstick.cfg
new file mode 100644 (file)
index 0000000..f589381
--- /dev/null
+++ b/tcl/interface/ftdi/hitex_str9-comstick.cfg
@@ -0,0 +1,18 @@
+#
+# Hitex STR9-comStick
+#
+# http://www.hitex.com/index.php?id=383
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "STR9-comStick"
+ftdi_vid_pid 0x0640 0x002c
+
+ftdi_layout_init 0x0308 0x030b
+ftdi_layout_signal nTRST -data 0x0100
+ftdi_layout_signal nSRST -data 0x0200

diff --git a/tcl/interface/ftdi/icebear.cfg b/tcl/interface/ftdi/icebear.cfg
new file mode 100644 (file)
index 0000000..2c03d41
--- /dev/null
+++ b/tcl/interface/ftdi/icebear.cfg
@@ -0,0 +1,18 @@
+#
+# Section5 ICEBear
+#
+# http://section5.ch/icebear
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "ICEbear JTAG adapter"
+ftdi_vid_pid 0x0403 0xc140
+
+ftdi_layout_init 0x0028 0x002b
+ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
+ftdi_layout_signal nSRST -data 0x0020

diff --git a/tcl/interface/ftdi/luminary-lm3s811.cfg b/tcl/interface/ftdi/luminary-lm3s811.cfg
new file mode 100644 (file)
index 0000000..232ba03
--- /dev/null
+++ b/tcl/interface/ftdi/luminary-lm3s811.cfg
@@ -0,0 +1,24 @@
+#
+# Luminary Micro Stellaris LM3S811 Evaluation Kit
+#
+# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
+#
+# NOTE:  this is only for boards *before* Rev C, which adds support
+# for SWO tracing with ADBUS_6 DBG_ENn and BDBUS_4 SWO_EN signals.
+# The "evb_lm3s811" layout doesn't set up those signals.
+#
+# Rev C boards work more like the other Stellaris eval boards.  They
+# need to use the "luminary_icdi" layout to work correctly.
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "LM3S811 Evaluation Board"
+ftdi_vid_pid 0x0403 0xbcd9
+
+ftdi_layout_init 0x0088 0x008b
+ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020

diff --git a/tcl/interface/ftdi/minimodule.cfg b/tcl/interface/ftdi/minimodule.cfg
new file mode 100644 (file)
index 0000000..57249df
--- /dev/null
+++ b/tcl/interface/ftdi/minimodule.cfg
@@ -0,0 +1,17 @@
+#
+# FTDI MiniModule
+#
+# http://www.ftdichip.com/Support/Documents/DataSheets/Modules/DS_FT2232H_Mini_Module.pdf
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "FT2232H MiniModule"
+ftdi_vid_pid 0x0403 0x6010
+
+ftdi_layout_init 0x0018 0x05fb
+ftdi_layout_signal nSRST -data 0x0020

diff --git a/tcl/interface/ftdi/openrd.cfg b/tcl/interface/ftdi/openrd.cfg
new file mode 100644 (file)
index 0000000..8c1a805
--- /dev/null
+++ b/tcl/interface/ftdi/openrd.cfg
@@ -0,0 +1,19 @@
+#
+# Marvell OpenRD
+#
+# http://www.marvell.com/products/embedded_processors/developer/kirkwood/openrd.jsp
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "OpenRD JTAGKey FT2232D"
+ftdi_vid_pid 0x0403 0x9e90
+ftdi_channel 1
+
+ftdi_layout_init 0x0608 0x0f1b
+ftdi_layout_signal nTRST -data 0x0200
+ftdi_layout_signal nSRST -noe 0x0400

diff --git a/tcl/interface/ftdi/redbee-econotag.cfg b/tcl/interface/ftdi/redbee-econotag.cfg
new file mode 100644 (file)
index 0000000..70c30d6
--- /dev/null
+++ b/tcl/interface/ftdi/redbee-econotag.cfg
@@ -0,0 +1,21 @@
+#
+# Redwire Redbee-Econotag
+#
+# http://www.redwirellc.com/store/node/1
+#
+# The Redbee-Econotag has an onboard FT2232H with:
+#  - FT2232H channel A wired to mc13224v JTAG
+#  - FT2232H channel B wired to mc13224v UART1
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_vid_pid 0x0403 0x6010
+
+ftdi_layout_init 0x0c08 0x0c2b
+ftdi_layout_signal nTRST -data 0x0800
+ftdi_layout_signal nSRST -data 0x0400

diff --git a/tcl/interface/ftdi/redbee-usb.cfg b/tcl/interface/ftdi/redbee-usb.cfg
new file mode 100644 (file)
index 0000000..b79300d
--- /dev/null
+++ b/tcl/interface/ftdi/redbee-usb.cfg
@@ -0,0 +1,22 @@
+#
+# Redwire Redbee-USB
+#
+# http://www.redwirellc.com
+#
+# The Redbee-USB has an onboard FT2232H with:
+#  - FT2232H channel B wired to mc13224v JTAG
+#  - FT2232H channel A wired to mc13224v UART1
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_vid_pid 0x0403 0x6010
+ftdi_channel 1
+
+ftdi_layout_init 0x0c08 0x0c2b
+ftdi_layout_signal nTRST -data 0x0800
+ftdi_layout_signal nSRST -data 0x0400

diff --git a/tcl/interface/ftdi/sheevaplug.cfg b/tcl/interface/ftdi/sheevaplug.cfg
new file mode 100644 (file)
index 0000000..e3afab3
--- /dev/null
+++ b/tcl/interface/ftdi/sheevaplug.cfg
@@ -0,0 +1,19 @@
+#
+# Marvel SheevaPlug Development Kit
+#
+# http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "SheevaPlug JTAGKey FT2232D"
+ftdi_vid_pid 0x9e88 0x9e8f
+ftdi_channel 1
+
+ftdi_layout_init 0x0608 0x0f1b
+ftdi_layout_signal nTRST -data 0x0200
+ftdi_layout_signal nSRST -noe 0x0400

diff --git a/tcl/interface/ftdi/signalyzer-lite.cfg b/tcl/interface/ftdi/signalyzer-lite.cfg
new file mode 100644 (file)
index 0000000..4988a3b
--- /dev/null
+++ b/tcl/interface/ftdi/signalyzer-lite.cfg
@@ -0,0 +1,18 @@
+#
+# Xverve Signalyzer LITE (DT-USB-SLITE)
+#
+# http://www.signalyzer.com
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "Signalyzer LITE"
+ftdi_vid_pid 0x0403 0xbca1
+
+ftdi_layout_init 0x0008 0x000b
+ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
+ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020

diff --git a/tcl/interface/ftdi/signalyzer.cfg b/tcl/interface/ftdi/signalyzer.cfg
new file mode 100644 (file)
index 0000000..e2629be
--- /dev/null
+++ b/tcl/interface/ftdi/signalyzer.cfg
@@ -0,0 +1,18 @@
+#
+# Xverve Signalyzer Tool (DT-USB-ST)
+#
+# http://www.signalyzer.com
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "Signalyzer"
+ftdi_vid_pid 0x0403 0xbca0
+
+ftdi_layout_init 0x0008 0x000b
+ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
+ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020

diff --git a/tcl/interface/ftdi/stm32-stick.cfg b/tcl/interface/ftdi/stm32-stick.cfg
new file mode 100644 (file)
index 0000000..86280a8
--- /dev/null
+++ b/tcl/interface/ftdi/stm32-stick.cfg
@@ -0,0 +1,18 @@
+#
+# Hitex STM32-PerformanceStick
+#
+# http://www.hitex.com/index.php?id=340
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "STM32-PerformanceStick"
+ftdi_vid_pid 0x0640 0x002d
+
+ftdi_layout_init 0x0188 0x038b
+ftdi_layout_signal nTRST -data 0x0100
+ftdi_layout_signal nSRST -data 0x0080