flash/nor: mrvlqspi: fix printf formatting issues

Change-Id: I74cfce7bb8dbc13fbc3005b5a96213417f93a9f2
Signed-off-by: Mahavir Jain <mjain@marvell.com>
Reviewed-on: http://openocd.zylin.com/2577
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Stian Skjelstad <stian@nixia.no>

diff --git a/src/flash/nor/mrvlqspi.c b/src/flash/nor/mrvlqspi.c
index a5cc1ca025c3077e9b1ab05f1eeaec329fbe4ae7..0dfe6f86fe60a5e1f2beb5b3e9dbf44dbfbfdbca 100644 (file)
--- a/src/flash/nor/mrvlqspi.c
+++ b/src/flash/nor/mrvlqspi.c
@@ -161,7 +161,7 @@ static int mrvlqspi_set_ss_state(struct flash_bank *bank, bool state, int timeou
                                mrvlqspi_get_reg(bank, CNTL), &regval);
                if (retval != ERROR_OK)
                        return retval;
-               LOG_DEBUG("status: 0x%x", regval);
+               LOG_DEBUG("status: 0x%08" PRIx32, regval);
                if ((regval & XFER_RDY) == XFER_RDY)
                        break;
                if (timeout-- <= 0) {
@@ -216,7 +216,7 @@ static int mrvlqspi_stop_transfer(struct flash_bank *bank)
                                mrvlqspi_get_reg(bank, CNTL), &regval);
                if (retval != ERROR_OK)
                        return retval;
-               LOG_DEBUG("status: 0x%x", regval);
+               LOG_DEBUG("status: 0x%08" PRIx32, regval);
                if ((regval & (XFER_RDY | WFIFO_EMPTY)) ==
                                        (XFER_RDY | WFIFO_EMPTY))
                        break;
@@ -245,7 +245,7 @@ static int mrvlqspi_stop_transfer(struct flash_bank *bank)
                                mrvlqspi_get_reg(bank, CONF), &regval);
                if (retval != ERROR_OK)
                        return retval;
-               LOG_DEBUG("status: 0x%x", regval);
+               LOG_DEBUG("status: 0x%08" PRIx32, regval);
                if ((regval & XFER_START) == 0)
                        break;
                if (timeout-- <= 0) {
@@ -286,7 +286,7 @@ static int mrvlqspi_fifo_flush(struct flash_bank *bank, int timeout)
                                mrvlqspi_get_reg(bank, CONF), &val);
                if (retval != ERROR_OK)
                        return retval;
-               LOG_DEBUG("status: 0x%x", val);
+               LOG_DEBUG("status: 0x%08" PRIX32, val);
                if ((val & FIFO_FLUSH) == 0)
                        break;
                if (timeout-- <= 0) {
@@ -310,7 +310,7 @@ static int mrvlqspi_read_byte(struct flash_bank *bank, uint8_t *data)
                                mrvlqspi_get_reg(bank, CNTL), &val);
                if (retval != ERROR_OK)
                        return retval;
-               LOG_DEBUG("status: 0x%x", val);
+               LOG_DEBUG("status: 0x%08" PRIx32, val);
                if ((val & RFIFO_EMPTY) == 0)
                        break;
                usleep(10);
@@ -455,7 +455,8 @@ static int mrvlqspi_read_id(struct flash_bank *bank, uint32_t *id)
                        return retval;
        }
 
-       LOG_DEBUG("ID is 0x%x 0x%x 0x%x", id_buf[0], id_buf[1], id_buf[2]);
+       LOG_DEBUG("ID is 0x%02" PRIx8 " 0x%02" PRIx8 " 0x%02" PRIx8,
+                                       id_buf[0], id_buf[1], id_buf[2]);
        retval = mrvlqspi_set_ss_state(bank, QSPI_SS_DISABLE, QSPI_TIMEOUT);
        if (retval != ERROR_OK)
                return retval;
@@ -854,11 +855,11 @@ static int mrvlqspi_probe(struct flash_bank *bank)
                }
 
        if (!mrvlqspi_info->dev) {
-               LOG_ERROR("Unknown flash device ID 0x%08x", id);
+               LOG_ERROR("Unknown flash device ID 0x%08" PRIx32, id);
                return ERROR_FAIL;
        }
 
-       LOG_INFO("Found flash device \'%s\' ID 0x%08x",
+       LOG_INFO("Found flash device \'%s\' ID 0x%08" PRIx32,
                mrvlqspi_info->dev->name, mrvlqspi_info->dev->device_id);
 
        /* Set correct size value */
@@ -918,7 +919,7 @@ int mrvlqspi_get_info(struct flash_bank *bank, char *buf, int buf_size)
        }
 
        snprintf(buf, buf_size, "\nQSPI flash information:\n"
-               "  Device \'%s\' ID 0x%08x\n",
+               "  Device \'%s\' ID 0x%08" PRIx32 "\n",
                mrvlqspi_info->dev->name, mrvlqspi_info->dev->device_id);
 
        return ERROR_OK;