Kevin Bortis <stm32@bortis.ch> fix worksize

git-svn-id: svn://svn.berlios.de/openocd/trunk@2419 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/tcl/board/olimex_stm32_h103.cfg b/tcl/board/olimex_stm32_h103.cfg
index fadf175517215896576e1e11425e3bb85bdaf1c1..de1fa8bf3c1939c65cfe7976aaff11591257b74e 100644 (file)
--- a/tcl/board/olimex_stm32_h103.cfg
+++ b/tcl/board/olimex_stm32_h103.cfg
@@ -4,5 +4,8 @@
 # http://olimex.com/dev/stm32-h103.html
 #
 
+#Set flash size to 128k for STM32103RB device
+set WORKAREASIZE 0x20000
+
 source [find target/stm32.cfg]
 

diff --git a/tcl/target/stm32.cfg b/tcl/target/stm32.cfg
index 2fe178501e47104fbb5262926ff143027d16727b..61ae562f0f515f79f9a4c3f0d65382456c505cf1 100644 (file)
--- a/tcl/target/stm32.cfg
+++ b/tcl/target/stm32.cfg
@@ -12,6 +12,14 @@ if { [info exists ENDIAN] } {
    set  _ENDIAN little
 }
 
+#Checking if user had set the work-area-size for the chip
+#If not, the value will be set to 16k
+if { [info exists WORKAREASIZE] } {
+   set  _WORKAREASIZE $WORKAREASIZE
+} else {
+   set  _WORKAREASIZE 0x4000
+}
+
 # jtag speed
 jtag_khz 500
 
@@ -50,7 +58,7 @@ jtag newtap $_CHIPNAME bs  -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BS
 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
 target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
 
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
 flash bank stm32x 0 0 0 0 0