Update upstream source from tag 'upstream/2.5'

[tio] / example / config

diff --git a/example/config b/example/config
new file mode 100644 (file)
index 0000000..05f96c9
--- /dev/null
+++ b/example/config
@@ -0,0 +1,64 @@
+###############################
+# tio - https://tio.github.io #
+###############################
+
+# Example tio configuration file
+#
+# Place file in any of the following locations:
+#  $XDG_CONFIG_HOME/tio/config
+#  $HOME/.config/tio/config
+#  $HOME/.tioconfig
+
+# Defaults
+baudrate = 115200
+databits = 8
+flow = none
+stopbits = 1
+parity = none
+prefix-ctrl-key = t
+output-delay = 0
+output-line-delay = 0
+no-autoconnect = disable
+hexadecimal = disable
+timestamp = disable
+log = disable
+log-strip = disable
+local-echo = disable
+color = bold
+rs-485 = disable
+response-wait = disable
+alert = none
+
+# Sub-configuraions
+
+[rpi3]
+baudrate = 115200
+device = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A6009HU3-if00-port0
+socket = unix:/tmp/tio-socket-0
+color = 9
+
+[am64-evm]
+baudrate = 115200
+device = /dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_01093176-if01-port0
+line-pulse-duration = DTR=200,RTS=300,RI=50
+alert = bell
+color = 10
+
+[tincan]
+baudrate = 9600
+device = /dev/serial/by-id/usb-TinCanTools_Flyswatter2_FS20000-if00-port0
+log = enable
+log-file = tincan.log
+log-strip = enable
+color = 11
+
+[usb]
+pattern = usb([0-9]*)
+device = /dev/ttyUSB%s
+color = 12
+
+[rs-485-device]
+device = /dev/ttyUSB0
+rs-485 = enable
+rs-485-config = RTS_ON_SEND=1,RTS_AFTER_SEND=1,RTS_DELAY_BEFORE_SEND=60,RTS_DELAY_AFTER_SEND=80,RX_DURING_TX
+color = 13