Update upstream source from tag 'upstream/2.5'

[tio] / example / tiorc

diff --git a/example/tiorc b/example/tiorc
deleted file mode 100644 (file)
index 78a197b..0000000
--- a/example/tiorc
+++ /dev/null
@@ -1,59 +0,0 @@
-###############################
-# tio - https://tio.github.io #
-###############################
-
-# Example configuration file
-
-# Defaults
-baudrate = 115200
-databits = 8
-flow = none
-stopbits = 1
-parity = none
-prefix-ctrl-key = t
-output-delay = 0
-output-line-delay = 0
-no-autoconnect = disable
-hexadecimal = disable
-timestamp = disable
-log = disable
-log-strip = disable
-local-echo = disable
-color = bold
-rs-485 = disable
-response-wait = disable
-alert = none
-
-# Sub-configuraions
-
-[rpi3]
-baudrate = 115200
-device = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A6009HU3-if00-port0
-socket = unix:/tmp/tio-socket-0
-color = 9
-
-[am64-evm]
-baudrate = 115200
-device = /dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_01093176-if01-port0
-line-pulse-duration = DTR=200,RTS=300,RI=50
-alert = bell
-color = 10
-
-[tincan]
-baudrate = 9600
-device = /dev/serial/by-id/usb-TinCanTools_Flyswatter2_FS20000-if00-port0
-log = enable
-log-file = tincan.log
-log-strip = enable
-color = 11
-
-[usb]
-pattern = usb([0-9]*)
-device = /dev/ttyUSB%s
-color = 12
-
-[rs-485-device]
-device = /dev/ttyUSB0
-rs-485 = enable
-rs-485-config = RTS_ON_SEND=1,RTS_AFTER_SEND=1,RTS_DELAY_BEFORE_SEND=60,RTS_DELAY_AFTER_SEND=80,RX_DURING_TX
-color = 13