git.sur5r.net Git - u-boot/blob - arch/arm/dts/r8a7791-koelsch.dts

   1 /*
   2  * Device Tree Source for the Koelsch board
   3  *
   4  * Copyright (C) 2013 Renesas Electronics Corporation
   5  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   6  * Copyright (C) 2014 Cogent Embedded, Inc.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0
   9  */
  10
  11 /*
  12  * SSI-AK4643
  13  *
  14  * SW1: 1: AK4643
  15  *      2: CN22
  16  *      3: ADV7511
  17  *
  18  * This command is required when Playback/Capture
  19  *
  20  *      amixer set "LINEOUT Mixer DACL" on
  21  *      amixer set "DVC Out" 100%
  22  *      amixer set "DVC In" 100%
  23  *
  24  * You can use Mute
  25  *
  26  *      amixer set "DVC Out Mute" on
  27  *      amixer set "DVC In Mute" on
  28  *
  29  * You can use Volume Ramp
  30  *
  31  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  32  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  33  *      amixer set "DVC Out Ramp" on
  34  *      aplay xxx.wav &
  35  *      amixer set "DVC Out"  80%  // Volume Down
  36  *      amixer set "DVC Out" 100%  // Volume Up
  37  */
  38
  39 /dts-v1/;
  40 #include "r8a7791.dtsi"
  41 #include <dt-bindings/gpio/gpio.h>
  42 #include <dt-bindings/input/input.h>
  43
  44 / {
  45         model = "Koelsch";
  46         compatible = "renesas,koelsch", "renesas,r8a7791";
  47
  48         aliases {
  49                 serial0 = &scif0;
  50                 serial1 = &scif1;
  51                 i2c9 = &gpioi2c1;
  52                 i2c12 = &i2cexio1;
  53         };
  54
  55         chosen {
  56                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
  57                 stdout-path = "serial0:115200n8";
  58         };
  59
  60         memory@40000000 {
  61                 device_type = "memory";
  62                 reg = <0 0x40000000 0 0x40000000>;
  63         };
  64
  65         memory@200000000 {
  66                 device_type = "memory";
  67                 reg = <2 0x00000000 0 0x40000000>;
  68         };
  69
  70         lbsc {
  71                 #address-cells = <1>;
  72                 #size-cells = <1>;
  73         };
  74
  75         keyboard {
  76                 compatible = "gpio-keys";
  77
  78                 key-1 {
  79                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  80                         linux,code = <KEY_1>;
  81                         label = "SW2-1";
  82                         wakeup-source;
  83                         debounce-interval = <20>;
  84                 };
  85                 key-2 {
  86                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  87                         linux,code = <KEY_2>;
  88                         label = "SW2-2";
  89                         wakeup-source;
  90                         debounce-interval = <20>;
  91                 };
  92                 key-3 {
  93                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
  94                         linux,code = <KEY_3>;
  95                         label = "SW2-3";
  96                         wakeup-source;
  97                         debounce-interval = <20>;
  98                 };
  99                 key-4 {
 100                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 101                         linux,code = <KEY_4>;
 102                         label = "SW2-4";
 103                         wakeup-source;
 104                         debounce-interval = <20>;
 105                 };
 106                 key-a {
 107                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 108                         linux,code = <KEY_A>;
 109                         label = "SW30";
 110                         wakeup-source;
 111                         debounce-interval = <20>;
 112                 };
 113                 key-b {
 114                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 115                         linux,code = <KEY_B>;
 116                         label = "SW31";
 117                         wakeup-source;
 118                         debounce-interval = <20>;
 119                 };
 120                 key-c {
 121                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 122                         linux,code = <KEY_C>;
 123                         label = "SW32";
 124                         wakeup-source;
 125                         debounce-interval = <20>;
 126                 };
 127                 key-d {
 128                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 129                         linux,code = <KEY_D>;
 130                         label = "SW33";
 131                         wakeup-source;
 132                         debounce-interval = <20>;
 133                 };
 134                 key-e {
 135                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 136                         linux,code = <KEY_E>;
 137                         label = "SW34";
 138                         wakeup-source;
 139                         debounce-interval = <20>;
 140                 };
 141                 key-f {
 142                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 143                         linux,code = <KEY_F>;
 144                         label = "SW35";
 145                         wakeup-source;
 146                         debounce-interval = <20>;
 147                 };
 148                 key-g {
 149                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 150                         linux,code = <KEY_G>;
 151                         label = "SW36";
 152                         wakeup-source;
 153                         debounce-interval = <20>;
 154                 };
 155         };
 156
 157         leds {
 158                 compatible = "gpio-leds";
 159                 led6 {
 160                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 161                         label = "LED6";
 162                 };
 163                 led7 {
 164                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 165                         label = "LED7";
 166                 };
 167                 led8 {
 168                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 169                         label = "LED8";
 170                 };
 171         };
 172
 173         vcc_sdhi0: regulator-vcc-sdhi0 {
 174                 compatible = "regulator-fixed";
 175
 176                 regulator-name = "SDHI0 Vcc";
 177                 regulator-min-microvolt = <3300000>;
 178                 regulator-max-microvolt = <3300000>;
 179
 180                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 181                 enable-active-high;
 182         };
 183
 184         vccq_sdhi0: regulator-vccq-sdhi0 {
 185                 compatible = "regulator-gpio";
 186
 187                 regulator-name = "SDHI0 VccQ";
 188                 regulator-min-microvolt = <1800000>;
 189                 regulator-max-microvolt = <3300000>;
 190
 191                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 192                 gpios-states = <1>;
 193                 states = <3300000 1
 194                           1800000 0>;
 195         };
 196
 197         vcc_sdhi1: regulator-vcc-sdhi1 {
 198                 compatible = "regulator-fixed";
 199
 200                 regulator-name = "SDHI1 Vcc";
 201                 regulator-min-microvolt = <3300000>;
 202                 regulator-max-microvolt = <3300000>;
 203
 204                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 205                 enable-active-high;
 206         };
 207
 208         vccq_sdhi1: regulator-vccq-sdhi1 {
 209                 compatible = "regulator-gpio";
 210
 211                 regulator-name = "SDHI1 VccQ";
 212                 regulator-min-microvolt = <1800000>;
 213                 regulator-max-microvolt = <3300000>;
 214
 215                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 216                 gpios-states = <1>;
 217                 states = <3300000 1
 218                           1800000 0>;
 219         };
 220
 221         vcc_sdhi2: regulator-vcc-sdhi2 {
 222                 compatible = "regulator-fixed";
 223
 224                 regulator-name = "SDHI2 Vcc";
 225                 regulator-min-microvolt = <3300000>;
 226                 regulator-max-microvolt = <3300000>;
 227
 228                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 229                 enable-active-high;
 230         };
 231
 232         vccq_sdhi2: regulator-vccq-sdhi2 {
 233                 compatible = "regulator-gpio";
 234
 235                 regulator-name = "SDHI2 VccQ";
 236                 regulator-min-microvolt = <1800000>;
 237                 regulator-max-microvolt = <3300000>;
 238
 239                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 240                 gpios-states = <1>;
 241                 states = <3300000 1
 242                           1800000 0>;
 243         };
 244
 245         audio_clock: audio_clock {
 246                 compatible = "fixed-clock";
 247                 #clock-cells = <0>;
 248                 clock-frequency = <11289600>;
 249         };
 250
 251         rsnd_ak4643: sound {
 252                 compatible = "simple-audio-card";
 253
 254                 simple-audio-card,format = "left_j";
 255                 simple-audio-card,bitclock-master = <&sndcodec>;
 256                 simple-audio-card,frame-master = <&sndcodec>;
 257
 258                 sndcpu: simple-audio-card,cpu {
 259                         sound-dai = <&rcar_sound>;
 260                 };
 261
 262                 sndcodec: simple-audio-card,codec {
 263                         sound-dai = <&ak4643>;
 264                         clocks = <&audio_clock>;
 265                 };
 266         };
 267
 268         hdmi-in {
 269                 compatible = "hdmi-connector";
 270                 type = "a";
 271
 272                 port {
 273                         hdmi_con_in: endpoint {
 274                                 remote-endpoint = <&adv7612_in>;
 275                         };
 276                 };
 277         };
 278
 279         hdmi-out {
 280                 compatible = "hdmi-connector";
 281                 type = "a";
 282
 283                 port {
 284                         hdmi_con_out: endpoint {
 285                                 remote-endpoint = <&adv7511_out>;
 286                         };
 287                 };
 288         };
 289
 290         x2_clk: x2-clock {
 291                 compatible = "fixed-clock";
 292                 #clock-cells = <0>;
 293                 clock-frequency = <74250000>;
 294         };
 295
 296         x13_clk: x13-clock {
 297                 compatible = "fixed-clock";
 298                 #clock-cells = <0>;
 299                 clock-frequency = <148500000>;
 300         };
 301
 302         gpioi2c1: i2c-9 {
 303                 #address-cells = <1>;
 304                 #size-cells = <0>;
 305                 compatible = "i2c-gpio";
 306                 status = "disabled";
 307                 gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */
 308                          &gpio7 15 GPIO_ACTIVE_HIGH /* scl */
 309                         >;
 310                 i2c-gpio,delay-us = <5>;
 311         };
 312
 313         /*
 314          * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 315          * A fallback to GPIO is provided.
 316          */
 317         i2cexio1: i2c-12 {
 318                 compatible = "i2c-demux-pinctrl";
 319                 i2c-parent = <&i2c1>, <&gpioi2c1>;
 320                 i2c-bus-name = "i2c-exio1";
 321                 #address-cells = <1>;
 322                 #size-cells = <0>;
 323         };
 324 };
 325
 326 &du {
 327         pinctrl-0 = <&du_pins>;
 328         pinctrl-names = "default";
 329         status = "okay";
 330
 331         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
 332                  <&x13_clk>, <&x2_clk>;
 333         clock-names = "du.0", "du.1", "lvds.0",
 334                       "dclkin.0", "dclkin.1";
 335
 336         ports {
 337                 port@0 {
 338                         endpoint {
 339                                 remote-endpoint = <&adv7511_in>;
 340                         };
 341                 };
 342                 port@1 {
 343                         lvds_connector: endpoint {
 344                         };
 345                 };
 346         };
 347 };
 348
 349 &extal_clk {
 350         clock-frequency = <20000000>;
 351 };
 352
 353 &pfc {
 354         pinctrl-0 = <&scif_clk_pins>;
 355         pinctrl-names = "default";
 356
 357         i2c1_pins: i2c1 {
 358                 groups = "i2c1";
 359                 function = "i2c1";
 360         };
 361
 362         i2c2_pins: i2c2 {
 363                 groups = "i2c2";
 364                 function = "i2c2";
 365         };
 366
 367         du_pins: du {
 368                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 369                 function = "du";
 370         };
 371
 372         scif0_pins: scif0 {
 373                 groups = "scif0_data_d";
 374                 function = "scif0";
 375         };
 376
 377         scif1_pins: scif1 {
 378                 groups = "scif1_data_d";
 379                 function = "scif1";
 380         };
 381
 382         scif_clk_pins: scif_clk {
 383                 groups = "scif_clk";
 384                 function = "scif_clk";
 385         };
 386
 387         ether_pins: ether {
 388                 groups = "eth_link", "eth_mdio", "eth_rmii";
 389                 function = "eth";
 390         };
 391
 392         phy1_pins: phy1 {
 393                 groups = "intc_irq0";
 394                 function = "intc";
 395         };
 396
 397         sdhi0_pins: sd0 {
 398                 groups = "sdhi0_data4", "sdhi0_ctrl";
 399                 function = "sdhi0";
 400                 power-source = <3300>;
 401         };
 402
 403         sdhi0_pins_uhs: sd0_uhs {
 404                 groups = "sdhi0_data4", "sdhi0_ctrl";
 405                 function = "sdhi0";
 406                 power-source = <1800>;
 407         };
 408
 409         sdhi1_pins: sd1 {
 410                 groups = "sdhi1_data4", "sdhi1_ctrl";
 411                 function = "sdhi1";
 412                 power-source = <3300>;
 413         };
 414
 415         sdhi1_pins_uhs: sd1_uhs {
 416                 groups = "sdhi1_data4", "sdhi1_ctrl";
 417                 function = "sdhi1";
 418                 power-source = <1800>;
 419         };
 420
 421         sdhi2_pins: sd2 {
 422                 groups = "sdhi2_data4", "sdhi2_ctrl";
 423                 function = "sdhi2";
 424                 power-source = <3300>;
 425         };
 426
 427         sdhi2_pins_uhs: sd2_uhs {
 428                 groups = "sdhi2_data4", "sdhi2_ctrl";
 429                 function = "sdhi2";
 430                 power-source = <1800>;
 431         };
 432
 433         qspi_pins: qspi {
 434                 groups = "qspi_ctrl", "qspi_data4";
 435                 function = "qspi";
 436         };
 437
 438         msiof0_pins: msiof0 {
 439                 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
 440                                  "msiof0_tx";
 441                 function = "msiof0";
 442         };
 443
 444         usb0_pins: usb0 {
 445                 groups = "usb0";
 446                 function = "usb0";
 447         };
 448
 449         usb1_pins: usb1 {
 450                 groups = "usb1";
 451                 function = "usb1";
 452         };
 453
 454         vin0_pins: vin0 {
 455                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 456                 function = "vin0";
 457         };
 458
 459         vin1_pins: vin1 {
 460                 groups = "vin1_data8", "vin1_clk";
 461                 function = "vin1";
 462         };
 463
 464         sound_pins: sound {
 465                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 466                 function = "ssi";
 467         };
 468
 469         sound_clk_pins: sound_clk {
 470                 groups = "audio_clk_a";
 471                 function = "audio_clk";
 472         };
 473 };
 474
 475 &ether {
 476         pinctrl-0 = <&ether_pins &phy1_pins>;
 477         pinctrl-names = "default";
 478
 479         phy-handle = <&phy1>;
 480         renesas,ether-link-active-low;
 481         status = "okay";
 482
 483         phy1: ethernet-phy@1 {
 484                 reg = <1>;
 485                 interrupt-parent = <&irqc0>;
 486                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 487                 micrel,led-mode = <1>;
 488         };
 489 };
 490
 491 &cmt0 {
 492         status = "okay";
 493 };
 494
 495 &sata0 {
 496         status = "okay";
 497 };
 498
 499 &scif0 {
 500         pinctrl-0 = <&scif0_pins>;
 501         pinctrl-names = "default";
 502
 503         status = "okay";
 504 };
 505
 506 &scif1 {
 507         pinctrl-0 = <&scif1_pins>;
 508         pinctrl-names = "default";
 509
 510         status = "okay";
 511 };
 512
 513 &scif_clk {
 514         clock-frequency = <14745600>;
 515 };
 516
 517 &sdhi0 {
 518         pinctrl-0 = <&sdhi0_pins>;
 519         pinctrl-1 = <&sdhi0_pins_uhs>;
 520         pinctrl-names = "default", "state_uhs";
 521
 522         vmmc-supply = <&vcc_sdhi0>;
 523         vqmmc-supply = <&vccq_sdhi0>;
 524         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 525         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 526         sd-uhs-sdr50;
 527         sd-uhs-sdr104;
 528         status = "okay";
 529 };
 530
 531 &sdhi1 {
 532         pinctrl-0 = <&sdhi1_pins>;
 533         pinctrl-1 = <&sdhi1_pins_uhs>;
 534         pinctrl-names = "default", "state_uhs";
 535
 536         vmmc-supply = <&vcc_sdhi1>;
 537         vqmmc-supply = <&vccq_sdhi1>;
 538         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 539         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 540         sd-uhs-sdr50;
 541         status = "okay";
 542 };
 543
 544 &sdhi2 {
 545         pinctrl-0 = <&sdhi2_pins>;
 546         pinctrl-1 = <&sdhi2_pins_uhs>;
 547         pinctrl-names = "default", "state_uhs";
 548
 549         vmmc-supply = <&vcc_sdhi2>;
 550         vqmmc-supply = <&vccq_sdhi2>;
 551         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 552         sd-uhs-sdr50;
 553         status = "okay";
 554 };
 555
 556 &qspi {
 557         pinctrl-0 = <&qspi_pins>;
 558         pinctrl-names = "default";
 559
 560         status = "okay";
 561
 562         flash: flash@0 {
 563                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 564                 reg = <0>;
 565                 spi-max-frequency = <30000000>;
 566                 spi-tx-bus-width = <4>;
 567                 spi-rx-bus-width = <4>;
 568                 spi-cpha;
 569                 spi-cpol;
 570                 m25p,fast-read;
 571
 572                 partitions {
 573                         compatible = "fixed-partitions";
 574                         #address-cells = <1>;
 575                         #size-cells = <1>;
 576
 577                         partition@0 {
 578                                 label = "loader";
 579                                 reg = <0x00000000 0x00080000>;
 580                                 read-only;
 581                         };
 582                         partition@80000 {
 583                                 label = "user";
 584                                 reg = <0x00080000 0x00580000>;
 585                                 read-only;
 586                         };
 587                         partition@600000 {
 588                                 label = "flash";
 589                                 reg = <0x00600000 0x03a00000>;
 590                         };
 591                 };
 592         };
 593 };
 594
 595 &msiof0 {
 596         pinctrl-0 = <&msiof0_pins>;
 597         pinctrl-names = "default";
 598
 599         status = "okay";
 600
 601         pmic: pmic@0 {
 602                 compatible = "renesas,r2a11302ft";
 603                 reg = <0>;
 604                 spi-max-frequency = <6000000>;
 605                 spi-cpol;
 606                 spi-cpha;
 607         };
 608 };
 609
 610 &i2c1 {
 611         pinctrl-0 = <&i2c1_pins>;
 612         pinctrl-names = "i2c-exio1";
 613 };
 614
 615 &i2c2 {
 616         pinctrl-0 = <&i2c2_pins>;
 617         pinctrl-names = "default";
 618
 619         status = "okay";
 620         clock-frequency = <100000>;
 621
 622         ak4643: codec@12 {
 623                 compatible = "asahi-kasei,ak4643";
 624                 #sound-dai-cells = <0>;
 625                 reg = <0x12>;
 626         };
 627
 628         composite-in@20 {
 629                 compatible = "adi,adv7180";
 630                 reg = <0x20>;
 631                 remote = <&vin1>;
 632
 633                 port {
 634                         adv7180: endpoint {
 635                                 bus-width = <8>;
 636                                 remote-endpoint = <&vin1ep>;
 637                         };
 638                 };
 639         };
 640
 641         cec_clock: cec-clock {
 642                 compatible = "fixed-clock";
 643                 #clock-cells = <0>;
 644                 clock-frequency = <12000000>;
 645         };
 646
 647         hdmi@39 {
 648                 compatible = "adi,adv7511w";
 649                 reg = <0x39>;
 650                 interrupt-parent = <&gpio3>;
 651                 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 652                 clocks = <&cec_clock>;
 653                 clock-names = "cec";
 654
 655                 adi,input-depth = <8>;
 656                 adi,input-colorspace = "rgb";
 657                 adi,input-clock = "1x";
 658                 adi,input-style = <1>;
 659                 adi,input-justification = "evenly";
 660
 661                 ports {
 662                         #address-cells = <1>;
 663                         #size-cells = <0>;
 664
 665                         port@0 {
 666                                 reg = <0>;
 667                                 adv7511_in: endpoint {
 668                                         remote-endpoint = <&du_out_rgb>;
 669                                 };
 670                         };
 671
 672                         port@1 {
 673                                 reg = <1>;
 674                                 adv7511_out: endpoint {
 675                                         remote-endpoint = <&hdmi_con_out>;
 676                                 };
 677                         };
 678                 };
 679         };
 680
 681         hdmi-in@4c {
 682                 compatible = "adi,adv7612";
 683                 reg = <0x4c>;
 684                 interrupt-parent = <&gpio4>;
 685                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 686                 default-input = <0>;
 687
 688                 ports {
 689                         #address-cells = <1>;
 690                         #size-cells = <0>;
 691
 692                         port@0 {
 693                                 reg = <0>;
 694                                 adv7612_in: endpoint {
 695                                         remote-endpoint = <&hdmi_con_in>;
 696                                 };
 697                         };
 698
 699                         port@2 {
 700                                 reg = <2>;
 701                                 adv7612_out: endpoint {
 702                                         remote-endpoint = <&vin0ep2>;
 703                                 };
 704                         };
 705                 };
 706         };
 707
 708         eeprom@50 {
 709                 compatible = "renesas,24c02", "atmel,24c02";
 710                 reg = <0x50>;
 711                 pagesize = <16>;
 712         };
 713 };
 714
 715 &i2c6 {
 716         status = "okay";
 717         clock-frequency = <100000>;
 718
 719         pmic@58 {
 720                 compatible = "dlg,da9063";
 721                 reg = <0x58>;
 722                 interrupt-parent = <&irqc0>;
 723                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 724                 interrupt-controller;
 725
 726                 rtc {
 727                         compatible = "dlg,da9063-rtc";
 728                 };
 729
 730                 wdt {
 731                         compatible = "dlg,da9063-watchdog";
 732                 };
 733         };
 734
 735         vdd_dvfs: regulator@68 {
 736                 compatible = "dlg,da9210";
 737                 reg = <0x68>;
 738                 interrupt-parent = <&irqc0>;
 739                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 740
 741                 regulator-min-microvolt = <1000000>;
 742                 regulator-max-microvolt = <1000000>;
 743                 regulator-boot-on;
 744                 regulator-always-on;
 745         };
 746 };
 747
 748 &pci0 {
 749         status = "okay";
 750         pinctrl-0 = <&usb0_pins>;
 751         pinctrl-names = "default";
 752 };
 753
 754 &pci1 {
 755         status = "okay";
 756         pinctrl-0 = <&usb1_pins>;
 757         pinctrl-names = "default";
 758 };
 759
 760 &hsusb {
 761         status = "okay";
 762         pinctrl-0 = <&usb0_pins>;
 763         pinctrl-names = "default";
 764         renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 765 };
 766
 767 &usbphy {
 768         status = "okay";
 769 };
 770
 771 &pcie_bus_clk {
 772         clock-frequency = <100000000>;
 773 };
 774
 775 &pciec {
 776         status = "okay";
 777 };
 778
 779 &cpu0 {
 780         cpu0-supply = <&vdd_dvfs>;
 781 };
 782
 783 /* HDMI video input */
 784 &vin0 {
 785         status = "okay";
 786         pinctrl-0 = <&vin0_pins>;
 787         pinctrl-names = "default";
 788
 789         port {
 790                 #address-cells = <1>;
 791                 #size-cells = <0>;
 792
 793                 vin0ep2: endpoint {
 794                         remote-endpoint = <&adv7612_out>;
 795                         bus-width = <24>;
 796                         hsync-active = <0>;
 797                         vsync-active = <0>;
 798                         pclk-sample = <1>;
 799                         data-active = <1>;
 800                 };
 801         };
 802 };
 803
 804 /* composite video input */
 805 &vin1 {
 806         status = "okay";
 807         pinctrl-0 = <&vin1_pins>;
 808         pinctrl-names = "default";
 809
 810         port {
 811                 #address-cells = <1>;
 812                 #size-cells = <0>;
 813
 814                 vin1ep: endpoint {
 815                         remote-endpoint = <&adv7180>;
 816                         bus-width = <8>;
 817                 };
 818         };
 819 };
 820
 821 &rcar_sound {
 822         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 823         pinctrl-names = "default";
 824
 825         /* Single DAI */
 826         #sound-dai-cells = <0>;
 827
 828         status = "okay";
 829
 830         rcar_sound,dai {
 831                 dai0 {
 832                         playback = <&ssi0 &src2 &dvc0>;
 833                         capture  = <&ssi1 &src3 &dvc1>;
 834                 };
 835         };
 836 };
 837
 838 &ssi1 {
 839         shared-pin;
 840 };