git.sur5r.net Git - u-boot/blob - board/liebherr/display5/spl.c

   1 /*
   2  * Copyright (C) 2017 DENX Software Engineering
   3  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #include <common.h>
   9 #include <spl.h>
  10 #include <libfdt.h>
  11 #include <asm/io.h>
  12 #include <asm/arch/clock.h>
  13 #include <asm/arch/mx6-ddr.h>
  14 #include <asm/arch/mx6-pins.h>
  15 #include "asm/arch/crm_regs.h"
  16 #include <asm/arch/sys_proto.h>
  17 #include <asm/arch/imx-regs.h>
  18 #include "asm/arch/iomux.h"
  19 #include <asm/mach-imx/iomux-v3.h>
  20 #include <environment.h>
  21 #include <fsl_esdhc.h>
  22 #include <netdev.h>
  23 #include "common.h"
  24
  25 DECLARE_GLOBAL_DATA_PTR;
  26
  27 static const struct mx6dq_iomux_ddr_regs mx6_ddr_ioregs = {
  28         .dram_sdclk_0 = 0x00000030,
  29         .dram_sdclk_1 = 0x00000030,
  30         .dram_cas = 0x00000030,
  31         .dram_ras = 0x00000030,
  32         .dram_reset = 0x00000030,
  33         .dram_sdcke0 = 0x00003000,
  34         .dram_sdcke1 = 0x00003000,
  35         .dram_sdba2 = 0x00000000,
  36         .dram_sdodt0 = 0x00000030,
  37         .dram_sdodt1 = 0x00000030,
  38
  39         .dram_sdqs0 = 0x00000030,
  40         .dram_sdqs1 = 0x00000030,
  41         .dram_sdqs2 = 0x00000030,
  42         .dram_sdqs3 = 0x00000030,
  43         .dram_sdqs4 = 0x00000030,
  44         .dram_sdqs5 = 0x00000030,
  45         .dram_sdqs6 = 0x00000030,
  46         .dram_sdqs7 = 0x00000030,
  47
  48         .dram_dqm0 = 0x00000030,
  49         .dram_dqm1 = 0x00000030,
  50         .dram_dqm2 = 0x00000030,
  51         .dram_dqm3 = 0x00000030,
  52         .dram_dqm4 = 0x00000030,
  53         .dram_dqm5 = 0x00000030,
  54         .dram_dqm6 = 0x00000030,
  55         .dram_dqm7 = 0x00000030,
  56 };
  57
  58 static const struct mx6dq_iomux_grp_regs mx6_grp_ioregs = {
  59         .grp_ddr_type = 0x000c0000,
  60         .grp_ddrmode_ctl = 0x00020000,
  61         .grp_ddrpke = 0x00000000,
  62         .grp_addds = 0x00000030,
  63         .grp_ctlds = 0x00000030,
  64         .grp_ddrmode = 0x00020000,
  65         .grp_b0ds = 0x00000030,
  66         .grp_b1ds = 0x00000030,
  67         .grp_b2ds = 0x00000030,
  68         .grp_b3ds = 0x00000030,
  69         .grp_b4ds = 0x00000030,
  70         .grp_b5ds = 0x00000030,
  71         .grp_b6ds = 0x00000030,
  72         .grp_b7ds = 0x00000030,
  73 };
  74
  75 /* 4x128Mx16.cfg */
  76 static const struct mx6_mmdc_calibration mx6_4x256mx16_mmdc_calib = {
  77         .p0_mpwldectrl0 = 0x002D0028,
  78         .p0_mpwldectrl1 = 0x0032002D,
  79         .p1_mpwldectrl0 = 0x00210036,
  80         .p1_mpwldectrl1 = 0x0019002E,
  81         .p0_mpdgctrl0 = 0x4349035C,
  82         .p0_mpdgctrl1 = 0x0348033D,
  83         .p1_mpdgctrl0 = 0x43550362,
  84         .p1_mpdgctrl1 = 0x03520316,
  85         .p0_mprddlctl = 0x41393940,
  86         .p1_mprddlctl = 0x3F3A3C47,
  87         .p0_mpwrdlctl = 0x413A423A,
  88         .p1_mpwrdlctl = 0x4042483E,
  89 };
  90
  91 /* MT41K128M16JT-125 (2Gb density) */
  92 static const struct mx6_ddr3_cfg mt41k128m16jt_125 = {
  93         .mem_speed = 1600,
  94         .density = 2,
  95         .width = 16,
  96         .banks = 8,
  97         .rowaddr = 14,
  98         .coladdr = 10,
  99         .pagesz = 2,
 100         .trcd = 1375,
 101         .trcmin = 4875,
 102         .trasmin = 3500,
 103 };
 104
 105 static void ccgr_init(void)
 106 {
 107         struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 108
 109         writel(0x00C03F3F, &ccm->CCGR0);
 110         writel(0x0030FC3F, &ccm->CCGR1);
 111         writel(0x0FFFCFC0, &ccm->CCGR2);
 112         writel(0x3FF00000, &ccm->CCGR3);
 113         writel(0x00FFF300, &ccm->CCGR4);
 114         writel(0x0F0000C3, &ccm->CCGR5);
 115         writel(0x000003FF, &ccm->CCGR6);
 116 }
 117
 118 static void spl_dram_init(void)
 119 {
 120         struct mx6_ddr_sysinfo sysinfo = {
 121                 /* width of data bus:0=16,1=32,2=64 */
 122                 .dsize = 2,
 123                 /* config for full 4GB range so that get_mem_size() works */
 124                 .cs_density = 32, /* 32Gb per CS */
 125                 /* single chip select */
 126                 .ncs = 1,
 127                 .cs1_mirror = 0,
 128                 .rtt_wr = 1 /*DDR3_RTT_60_OHM*/,        /* RTT_Wr = RZQ/4 */
 129                 .rtt_nom = 2 /*DDR3_RTT_120_OHM*/,      /* RTT_Nom = RZQ/2 */
 130                 .walat = 1,     /* Write additional latency */
 131                 .ralat = 5,     /* Read additional latency */
 132                 .mif3_mode = 3, /* Command prediction working mode */
 133                 .bi_on = 1,     /* Bank interleaving enabled */
 134                 .sde_to_rst = 0x10,     /* 14 cycles, 200us (JEDEC default) */
 135                 .rst_to_cke = 0x23,     /* 33 cycles, 500us (JEDEC default) */
 136                 .pd_fast_exit = 1, /* enable precharge power-down fast exit */
 137                 .ddr_type = DDR_TYPE_DDR3,
 138                 .refsel = 1,    /* Refresh cycles at 32KHz */
 139                 .refr = 7,      /* 8 refresh commands per refresh cycle */
 140         };
 141
 142         mx6dq_dram_iocfg(64, &mx6_ddr_ioregs, &mx6_grp_ioregs);
 143         mx6_dram_cfg(&sysinfo, &mx6_4x256mx16_mmdc_calib, &mt41k128m16jt_125);
 144 }
 145
 146 #ifdef CONFIG_SPL_SPI_SUPPORT
 147 static void displ5_init_ecspi(void)
 148 {
 149         displ5_set_iomux_ecspi_spl();
 150         enable_spi_clk(1, 1);
 151 }
 152 #else
 153 static inline void displ5_init_ecspi(void) { }
 154 #endif
 155
 156 #ifdef CONFIG_SPL_MMC_SUPPORT
 157 static struct fsl_esdhc_cfg usdhc_cfg = {
 158         .esdhc_base = USDHC4_BASE_ADDR,
 159         .max_bus_width = 8,
 160 };
 161
 162 int board_mmc_init(bd_t *bd)
 163 {
 164         displ5_set_iomux_usdhc_spl();
 165
 166         usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
 167         gd->arch.sdhc_clk = usdhc_cfg.sdhc_clk;
 168
 169         return fsl_esdhc_initialize(bd, &usdhc_cfg);
 170 }
 171 #endif
 172
 173 void board_init_f(ulong dummy)
 174 {
 175         ccgr_init();
 176
 177         arch_cpu_init();
 178
 179         gpr_init();
 180
 181         /* setup GP timer */
 182         timer_init();
 183
 184         displ5_set_iomux_uart_spl();
 185
 186         /* UART clocks enabled and gd valid - init serial console */
 187         preloader_console_init();
 188
 189         displ5_init_ecspi();
 190
 191         /* DDR initialization */
 192         spl_dram_init();
 193
 194         /* Clear the BSS. */
 195         memset(__bss_start, 0, __bss_end - __bss_start);
 196
 197         /* load/boot image from boot device */
 198         board_init_r(NULL, 0);
 199 }
 200
 201 void board_boot_order(u32 *spl_boot_list)
 202 {
 203         /* Default boot sequence SPI -> MMC */
 204         spl_boot_list[0] = spl_boot_device();
 205         spl_boot_list[1] = BOOT_DEVICE_MMC1;
 206         spl_boot_list[2] = BOOT_DEVICE_UART;
 207         spl_boot_list[3] = BOOT_DEVICE_NONE;
 208
 209 #ifdef CONFIG_SPL_ENV_SUPPORT
 210         /* 'fastboot' */
 211         const char *s;
 212
 213         env_init();
 214         env_load();
 215
 216         s = env_get("BOOT_FROM");
 217         if (s && strcmp(s, "ACTIVE") == 0) {
 218                 spl_boot_list[0] = BOOT_DEVICE_MMC1;
 219                 spl_boot_list[1] = spl_boot_device();
 220         }
 221 #endif
 222 }
 223
 224 void reset_cpu(ulong addr) {}
 225
 226 #ifdef CONFIG_SPL_LOAD_FIT
 227 int board_fit_config_name_match(const char *name)
 228 {
 229         return 0;
 230 }
 231 #endif
 232
 233 #ifdef CONFIG_SPL_OS_BOOT
 234 /* Return: 1 - boot to U-Boot. 0 - boot OS (falcon mode) */
 235 int spl_start_uboot(void)
 236 {
 237         /* break into full u-boot on 'c' */
 238         if (serial_tstc() && serial_getc() == 'c')
 239                 return 1;
 240
 241 #ifdef CONFIG_SPL_ENV_SUPPORT
 242         if (env_get_yesno("boot_os") != 1)
 243                 return 1;
 244 #endif
 245         return 0;
 246 }
 247 #endif