]> git.sur5r.net Git - u-boot/blob - common/spl/spl_spi.c
df460467298843b1f107c091620124e09c37e7ed
[u-boot] / common / spl / spl_spi.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2011 OMICRON electronics GmbH
4  *
5  * based on drivers/mtd/nand/nand_spl_load.c
6  *
7  * Copyright (C) 2011
8  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
9  */
10
11 #include <common.h>
12 #include <spi.h>
13 #include <spi_flash.h>
14 #include <errno.h>
15 #include <spl.h>
16
17 DECLARE_GLOBAL_DATA_PTR;
18
19 #ifdef CONFIG_SPL_OS_BOOT
20 /*
21  * Load the kernel, check for a valid header we can parse, and if found load
22  * the kernel and then device tree.
23  */
24 static int spi_load_image_os(struct spl_image_info *spl_image,
25                              struct spi_flash *flash,
26                              struct image_header *header)
27 {
28         int err;
29
30         /* Read for a header, parse or error out. */
31         spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, 0x40,
32                        (void *)header);
33
34         if (image_get_magic(header) != IH_MAGIC)
35                 return -1;
36
37         err = spl_parse_image_header(spl_image, header);
38         if (err)
39                 return err;
40
41         spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS,
42                        spl_image->size, (void *)spl_image->load_addr);
43
44         /* Read device tree. */
45         spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS,
46                        CONFIG_SYS_SPI_ARGS_SIZE,
47                        (void *)CONFIG_SYS_SPL_ARGS_ADDR);
48
49         return 0;
50 }
51 #endif
52
53 static ulong spl_spi_fit_read(struct spl_load_info *load, ulong sector,
54                               ulong count, void *buf)
55 {
56         struct spi_flash *flash = load->dev;
57         ulong ret;
58
59         ret = spi_flash_read(flash, sector, count, buf);
60         if (!ret)
61                 return count;
62         else
63                 return 0;
64 }
65 /*
66  * The main entry for SPI booting. It's necessary that SDRAM is already
67  * configured and available since this code loads the main U-Boot image
68  * from SPI into SDRAM and starts it from there.
69  */
70 static int spl_spi_load_image(struct spl_image_info *spl_image,
71                               struct spl_boot_device *bootdev)
72 {
73         int err = 0;
74         unsigned payload_offs = CONFIG_SYS_SPI_U_BOOT_OFFS;
75         struct spi_flash *flash;
76         struct image_header *header;
77
78         /*
79          * Load U-Boot image from SPI flash into RAM
80          */
81
82         flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
83                                 CONFIG_SF_DEFAULT_CS,
84                                 CONFIG_SF_DEFAULT_SPEED,
85                                 CONFIG_SF_DEFAULT_MODE);
86         if (!flash) {
87                 puts("SPI probe failed.\n");
88                 return -ENODEV;
89         }
90
91         /* use CONFIG_SYS_TEXT_BASE as temporary storage area */
92         header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
93
94 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
95         payload_offs = fdtdec_get_config_int(gd->fdt_blob,
96                                              "u-boot,spl-payload-offset",
97                                              payload_offs);
98 #endif
99
100 #ifdef CONFIG_SPL_OS_BOOT
101         if (spl_start_uboot() || spi_load_image_os(spl_image, flash, header))
102 #endif
103         {
104                 /* Load u-boot, mkimage header is 64 bytes. */
105                 err = spi_flash_read(flash, payload_offs, 0x40,
106                                      (void *)header);
107                 if (err) {
108                         debug("%s: Failed to read from SPI flash (err=%d)\n",
109                               __func__, err);
110                         return err;
111                 }
112
113                 if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
114                         image_get_magic(header) == FDT_MAGIC) {
115                         struct spl_load_info load;
116
117                         debug("Found FIT\n");
118                         load.dev = flash;
119                         load.priv = NULL;
120                         load.filename = NULL;
121                         load.bl_len = 1;
122                         load.read = spl_spi_fit_read;
123                         err = spl_load_simple_fit(spl_image, &load,
124                                                   payload_offs,
125                                                   header);
126                 } else {
127                         err = spl_parse_image_header(spl_image, header);
128                         if (err)
129                                 return err;
130                         err = spi_flash_read(flash, payload_offs,
131                                              spl_image->size,
132                                              (void *)spl_image->load_addr);
133                 }
134         }
135
136         return err;
137 }
138 /* Use priorty 1 so that boards can override this */
139 SPL_LOAD_IMAGE_METHOD("SPI", 1, BOOT_DEVICE_SPI, spl_spi_load_image);