]> git.sur5r.net Git - u-boot/blob - drivers/input/cros_ec_keyb.c
6fa35a63ddcf139a5c6d35af38203987c3e29f7f
[u-boot] / drivers / input / cros_ec_keyb.c
1 /*
2  * Chromium OS Matrix Keyboard
3  *
4  * Copyright (c) 2012 The Chromium OS Authors.
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #include <common.h>
10 #include <cros_ec.h>
11 #include <dm.h>
12 #include <errno.h>
13 #include <input.h>
14 #include <keyboard.h>
15 #include <key_matrix.h>
16 #include <stdio_dev.h>
17
18 DECLARE_GLOBAL_DATA_PTR;
19
20 enum {
21         KBC_MAX_KEYS            = 8,    /* Maximum keys held down at once */
22         KBC_REPEAT_RATE_MS      = 30,
23         KBC_REPEAT_DELAY_MS     = 240,
24 };
25
26 struct cros_ec_keyb_priv {
27         struct input_config *input;     /* The input layer */
28         struct key_matrix matrix;       /* The key matrix layer */
29         int key_rows;                   /* Number of keyboard rows */
30         int key_cols;                   /* Number of keyboard columns */
31         int ghost_filter;               /* 1 to enable ghost filter, else 0 */
32 };
33
34
35 /**
36  * Check the keyboard controller and return a list of key matrix positions
37  * for which a key is pressed
38  *
39  * @param dev           Keyboard device
40  * @param keys          List of keys that we have detected
41  * @param max_count     Maximum number of keys to return
42  * @param samep         Set to true if this scan repeats the last, else false
43  * @return number of pressed keys, 0 for none, -EIO on error
44  */
45 static int check_for_keys(struct udevice *dev, struct key_matrix_key *keys,
46                           int max_count, bool *samep)
47 {
48         struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
49         struct key_matrix_key *key;
50         static struct mbkp_keyscan last_scan;
51         static bool last_scan_valid;
52         struct mbkp_keyscan scan;
53         unsigned int row, col, bit, data;
54         int num_keys;
55
56         if (cros_ec_scan_keyboard(dev->parent, &scan)) {
57                 debug("%s: keyboard scan failed\n", __func__);
58                 return -EIO;
59         }
60         *samep = last_scan_valid && !memcmp(&last_scan, &scan, sizeof(scan));
61
62         /*
63          * This is a bit odd. The EC has no way to tell us that it has run
64          * out of key scans. It just returns the same scan over and over
65          * again. So the only way to detect that we have run out is to detect
66          * that this scan is the same as the last.
67          */
68         last_scan_valid = true;
69         memcpy(&last_scan, &scan, sizeof(last_scan));
70
71         for (col = num_keys = bit = 0; col < priv->matrix.num_cols;
72                         col++) {
73                 for (row = 0; row < priv->matrix.num_rows; row++) {
74                         unsigned int mask = 1 << (bit & 7);
75
76                         data = scan.data[bit / 8];
77                         if ((data & mask) && num_keys < max_count) {
78                                 key = keys + num_keys++;
79                                 key->row = row;
80                                 key->col = col;
81                                 key->valid = 1;
82                         }
83                         bit++;
84                 }
85         }
86
87         return num_keys;
88 }
89
90 /**
91  * Check the keyboard, and send any keys that are pressed.
92  *
93  * This is called by input_tstc() and input_getc() when they need more
94  * characters
95  *
96  * @param input         Input configuration
97  * @return 1, to indicate that we have something to look at
98  */
99 int cros_ec_kbc_check(struct input_config *input)
100 {
101         struct udevice *dev = input->dev;
102         struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
103         static struct key_matrix_key last_keys[KBC_MAX_KEYS];
104         static int last_num_keys;
105         struct key_matrix_key keys[KBC_MAX_KEYS];
106         int keycodes[KBC_MAX_KEYS];
107         int num_keys, num_keycodes;
108         int irq_pending, sent;
109         bool same = false;
110
111         /*
112          * Loop until the EC has no more keyscan records, or we have
113          * received at least one character. This means we know that tstc()
114          * will always return non-zero if keys have been pressed.
115          *
116          * Without this loop, a key release (which generates no new ascii
117          * characters) will cause us to exit this function, and just tstc()
118          * may return 0 before all keys have been read from the EC.
119          */
120         do {
121                 irq_pending = cros_ec_interrupt_pending(dev->parent);
122                 if (irq_pending) {
123                         num_keys = check_for_keys(dev, keys, KBC_MAX_KEYS,
124                                                   &same);
125                         if (num_keys < 0)
126                                 return 0;
127                         last_num_keys = num_keys;
128                         memcpy(last_keys, keys, sizeof(keys));
129                 } else {
130                         /*
131                          * EC doesn't want to be asked, so use keys from last
132                          * time.
133                          */
134                         num_keys = last_num_keys;
135                         memcpy(keys, last_keys, sizeof(keys));
136                 }
137
138                 if (num_keys < 0)
139                         return -1;
140                 num_keycodes = key_matrix_decode(&priv->matrix, keys,
141                                 num_keys, keycodes, KBC_MAX_KEYS);
142                 sent = input_send_keycodes(input, keycodes, num_keycodes);
143
144                 /*
145                  * For those ECs without an interrupt, stop scanning when we
146                  * see that the scan is the same as last time.
147                  */
148                 if ((irq_pending < 0) && same)
149                         break;
150         } while (irq_pending && !sent);
151
152         return 1;
153 }
154
155 /**
156  * Decode MBKP keyboard details from the device tree
157  *
158  * @param blob          Device tree blob
159  * @param node          Node to decode from
160  * @param config        Configuration data read from fdt
161  * @return 0 if ok, -1 on error
162  */
163 static int cros_ec_keyb_decode_fdt(struct udevice *dev,
164                                    struct cros_ec_keyb_priv *config)
165 {
166         /*
167          * Get keyboard rows and columns - at present we are limited to
168          * 8 columns by the protocol (one byte per row scan)
169          */
170         config->key_rows = dev_read_u32_default(dev, "keypad,num-rows", 0);
171         config->key_cols = dev_read_u32_default(dev, "keypad,num-columns", 0);
172         if (!config->key_rows || !config->key_cols ||
173                         config->key_rows * config->key_cols / 8
174                                 > CROS_EC_KEYSCAN_COLS) {
175                 debug("%s: Invalid key matrix size %d x %d\n", __func__,
176                       config->key_rows, config->key_cols);
177                 return -1;
178         }
179         config->ghost_filter = dev_read_bool(dev, "google,needs-ghost-filter");
180
181         return 0;
182 }
183
184 static int cros_ec_kbd_probe(struct udevice *dev)
185 {
186         struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
187         struct keyboard_priv *uc_priv = dev_get_uclass_priv(dev);
188         struct stdio_dev *sdev = &uc_priv->sdev;
189         struct input_config *input = &uc_priv->input;
190         int ret;
191
192         ret = cros_ec_keyb_decode_fdt(dev, priv);
193         if (ret) {
194                 debug("%s: Cannot decode node (ret=%d)\n", __func__, ret);
195                 return -EINVAL;
196         }
197         input_set_delays(input, KBC_REPEAT_DELAY_MS, KBC_REPEAT_RATE_MS);
198         ret = key_matrix_init(&priv->matrix, priv->key_rows, priv->key_cols,
199                               priv->ghost_filter);
200         if (ret) {
201                 debug("%s: cannot init key matrix\n", __func__);
202                 return ret;
203         }
204         ret = key_matrix_decode_fdt(dev, &priv->matrix);
205         if (ret) {
206                 debug("%s: Could not decode key matrix from fdt\n", __func__);
207                 return ret;
208         }
209         debug("%s: Matrix keyboard %dx%d ready\n", __func__, priv->key_rows,
210               priv->key_cols);
211
212         priv->input = input;
213         input->dev = dev;
214         input_add_tables(input, false);
215         input->read_keys = cros_ec_kbc_check;
216         strcpy(sdev->name, "cros-ec-keyb");
217
218         /* Register the device. cros_ec_init_keyboard() will be called soon */
219         return input_stdio_register(sdev);
220 }
221
222 static const struct keyboard_ops cros_ec_kbd_ops = {
223 };
224
225 static const struct udevice_id cros_ec_kbd_ids[] = {
226         { .compatible = "google,cros-ec-keyb" },
227         { }
228 };
229
230 U_BOOT_DRIVER(cros_ec_kbd) = {
231         .name   = "cros_ec_kbd",
232         .id     = UCLASS_KEYBOARD,
233         .of_match = cros_ec_kbd_ids,
234         .probe = cros_ec_kbd_probe,
235         .ops    = &cros_ec_kbd_ops,
236         .priv_auto_alloc_size = sizeof(struct cros_ec_keyb_priv),
237 };