[u-boot] / drivers / mtd / ubi / eba.c

/*
 * Copyright (c) International Business Machines Corp., 2006
 *
 * SPDX-License-Identifier:     GPL-2.0+
 *
 * Author: Artem Bityutskiy (Битюцкий Артём)
 */

/*
 * The UBI Eraseblock Association (EBA) sub-system.
 *
 * This sub-system is responsible for I/O to/from logical eraseblock.
 *
 * Although in this implementation the EBA table is fully kept and managed in
 * RAM, which assumes poor scalability, it might be (partially) maintained on
 * flash in future implementations.
 *
 * The EBA sub-system implements per-logical eraseblock locking. Before
 * accessing a logical eraseblock it is locked for reading or writing. The
 * per-logical eraseblock locking is implemented by means of the lock tree. The
 * lock tree is an RB-tree which refers all the currently locked logical
 * eraseblocks. The lock tree elements are &struct ubi_ltree_entry objects.
 * They are indexed by (@vol_id, @lnum) pairs.
 *
 * EBA also maintains the global sequence counter which is incremented each
 * time a logical eraseblock is mapped to a physical eraseblock and it is
 * stored in the volume identifier header. This means that each VID header has
 * a unique sequence number. The sequence number is only increased an we assume
 * 64 bits is enough to never overflow.
 */

#ifndef __UBOOT__
#include <linux/slab.h>
#include <linux/crc32.h>
#else
#include <ubi_uboot.h>
#endif

#include <linux/err.h>
#include "ubi.h"

/* Number of physical eraseblocks reserved for atomic LEB change operation */
#define EBA_RESERVED_PEBS 1

/**
 * next_sqnum - get next sequence number.
 * @ubi: UBI device description object
 *
 * This function returns next sequence number to use, which is just the current
 * global sequence counter value. It also increases the global sequence
 * counter.
 */
unsigned long long ubi_next_sqnum(struct ubi_device *ubi)
{
        unsigned long long sqnum;

        spin_lock(&ubi->ltree_lock);
        sqnum = ubi->global_sqnum++;
        spin_unlock(&ubi->ltree_lock);

        return sqnum;
}

/**
 * ubi_get_compat - get compatibility flags of a volume.
 * @ubi: UBI device description object
 * @vol_id: volume ID
 *
 * This function returns compatibility flags for an internal volume. User
 * volumes have no compatibility flags, so %0 is returned.
 */
static int ubi_get_compat(const struct ubi_device *ubi, int vol_id)
{
        if (vol_id == UBI_LAYOUT_VOLUME_ID)
                return UBI_LAYOUT_VOLUME_COMPAT;
        return 0;
}

/**
 * ltree_lookup - look up the lock tree.
 * @ubi: UBI device description object
 * @vol_id: volume ID
 * @lnum: logical eraseblock number
 *
 * This function returns a pointer to the corresponding &struct ubi_ltree_entry
 * object if the logical eraseblock is locked and %NULL if it is not.
 * @ubi->ltree_lock has to be locked.
 */
static struct ubi_ltree_entry *ltree_lookup(struct ubi_device *ubi, int vol_id,
                                            int lnum)
{
        struct rb_node *p;

        p = ubi->ltree.rb_node;
        while (p) {
                struct ubi_ltree_entry *le;

                le = rb_entry(p, struct ubi_ltree_entry, rb);

                if (vol_id < le->vol_id)
                        p = p->rb_left;
                else if (vol_id > le->vol_id)
                        p = p->rb_right;
                else {
                        if (lnum < le->lnum)
                                p = p->rb_left;
                        else if (lnum > le->lnum)
                                p = p->rb_right;
                        else
                                return le;
                }
        }

        return NULL;
}

/**
 * ltree_add_entry - add new entry to the lock tree.
 * @ubi: UBI device description object
 * @vol_id: volume ID
 * @lnum: logical eraseblock number
 *
 * This function adds new entry for logical eraseblock (@vol_id, @lnum) to the
 * lock tree. If such entry is already there, its usage counter is increased.
 * Returns pointer to the lock tree entry or %-ENOMEM if memory allocation
 * failed.
 */
static struct ubi_ltree_entry *ltree_add_entry(struct ubi_device *ubi,
                                               int vol_id, int lnum)
{
        struct ubi_ltree_entry *le, *le1, *le_free;

        le = kmalloc(sizeof(struct ubi_ltree_entry), GFP_NOFS);
        if (!le)
                return ERR_PTR(-ENOMEM);

        le->users = 0;
        init_rwsem(&le->mutex);
        le->vol_id = vol_id;
        le->lnum = lnum;

        spin_lock(&ubi->ltree_lock);
        le1 = ltree_lookup(ubi, vol_id, lnum);

        if (le1) {
                /*
                 * This logical eraseblock is already locked. The newly
                 * allocated lock entry is not needed.
                 */
                le_free = le;
                le = le1;
        } else {
                struct rb_node **p, *parent = NULL;

                /*
                 * No lock entry, add the newly allocated one to the
                 * @ubi->ltree RB-tree.
                 */
                le_free = NULL;

                p = &ubi->ltree.rb_node;
                while (*p) {
                        parent = *p;
                        le1 = rb_entry(parent, struct ubi_ltree_entry, rb);

                        if (vol_id < le1->vol_id)
                                p = &(*p)->rb_left;
                        else if (vol_id > le1->vol_id)
                                p = &(*p)->rb_right;
                        else {
                                ubi_assert(lnum != le1->lnum);
                                if (lnum < le1->lnum)
                                        p = &(*p)->rb_left;
                                else
                                        p = &(*p)->rb_right;
                        }
                }

                rb_link_node(&le->rb, parent, p);
                rb_insert_color(&le->rb, &ubi->ltree);
        }
        le->users += 1;
        spin_unlock(&ubi->ltree_lock);

        kfree(le_free);
        return le;
}

/**
 * leb_read_lock - lock logical eraseblock for reading.
 * @ubi: UBI device description object
 * @vol_id: volume ID
 * @lnum: logical eraseblock number
 *
 * This function locks a logical eraseblock for reading. Returns zero in case
 * of success and a negative error code in case of failure.
 */
static int leb_read_lock(struct ubi_device *ubi, int vol_id, int lnum)
{
        struct ubi_ltree_entry *le;

        le = ltree_add_entry(ubi, vol_id, lnum);
        if (IS_ERR(le))
                return PTR_ERR(le);
        down_read(&le->mutex);
        return 0;
}

/**
 * leb_read_unlock - unlock logical eraseblock.
 * @ubi: UBI device description object
 * @vol_id: volume ID
 * @lnum: logical eraseblock number
 */
static void leb_read_unlock(struct ubi_device *ubi, int vol_id, int lnum)
{
        struct ubi_ltree_entry *le;

        spin_lock(&ubi->ltree_lock);
        le = ltree_lookup(ubi, vol_id, lnum);
        le->users -= 1;
        ubi_assert(le->users >= 0);
        up_read(&le->mutex);
        if (le->users == 0) {
                rb_erase(&le->rb, &ubi->ltree);
                kfree(le);
        }
        spin_unlock(&ubi->ltree_lock);
}

/**
 * leb_write_lock - lock logical eraseblock for writing.
 * @ubi: UBI device description object
 * @vol_id: volume ID
 * @lnum: logical eraseblock number
 *
 * This function locks a logical eraseblock for writing. Returns zero in case
 * of success and a negative error code in case of failure.
 */
static int leb_write_lock(struct ubi_device *ubi, int vol_id, int lnum)
{
        struct ubi_ltree_entry *le;

        le = ltree_add_entry(ubi, vol_id, lnum);
        if (IS_ERR(le))
                return PTR_ERR(le);
        down_write(&le->mutex);
        return 0;
}

/**
 * leb_write_lock - lock logical eraseblock for writing.
 * @ubi: UBI device description object
 * @vol_id: volume ID
 * @lnum: logical eraseblock number
 *
 * This function locks a logical eraseblock for writing if there is no
 * contention and does nothing if there is contention. Returns %0 in case of
 * success, %1 in case of contention, and and a negative error code in case of
 * failure.
 */
static int leb_write_trylock(struct ubi_device *ubi, int vol_id, int lnum)
{
        struct ubi_ltree_entry *le;

        le = ltree_add_entry(ubi, vol_id, lnum);
        if (IS_ERR(le))
                return PTR_ERR(le);
        if (down_write_trylock(&le->mutex))
                return 0;

        /* Contention, cancel */
        spin_lock(&ubi->ltree_lock);
        le->users -= 1;
        ubi_assert(le->users >= 0);
        if (le->users == 0) {
                rb_erase(&le->rb, &ubi->ltree);
                kfree(le);
        }
        spin_unlock(&ubi->ltree_lock);

        return 1;
}

/**
 * leb_write_unlock - unlock logical eraseblock.
 * @ubi: UBI device description object
 * @vol_id: volume ID
 * @lnum: logical eraseblock number
 */
static void leb_write_unlock(struct ubi_device *ubi, int vol_id, int lnum)
{
        struct ubi_ltree_entry *le;

        spin_lock(&ubi->ltree_lock);
        le = ltree_lookup(ubi, vol_id, lnum);
        le->users -= 1;
        ubi_assert(le->users >= 0);
        up_write(&le->mutex);
        if (le->users == 0) {
                rb_erase(&le->rb, &ubi->ltree);
                kfree(le);
        }
        spin_unlock(&ubi->ltree_lock);
}

/**
 * ubi_eba_unmap_leb - un-map logical eraseblock.
 * @ubi: UBI device description object
 * @vol: volume description object
 * @lnum: logical eraseblock number
 *
 * This function un-maps logical eraseblock @lnum and schedules corresponding
 * physical eraseblock for erasure. Returns zero in case of success and a
 * negative error code in case of failure.
 */
int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
                      int lnum)
{
        int err, pnum, vol_id = vol->vol_id;

        if (ubi->ro_mode)
                return -EROFS;

        err = leb_write_lock(ubi, vol_id, lnum);
        if (err)
                return err;

        pnum = vol->eba_tbl[lnum];
        if (pnum < 0)
                /* This logical eraseblock is already unmapped */
                goto out_unlock;

        dbg_eba("erase LEB %d:%d, PEB %d", vol_id, lnum, pnum);

        down_read(&ubi->fm_eba_sem);
        vol->eba_tbl[lnum] = UBI_LEB_UNMAPPED;
        up_read(&ubi->fm_eba_sem);
        err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 0);

out_unlock:
        leb_write_unlock(ubi, vol_id, lnum);
        return err;
}

/**
 * ubi_eba_read_leb - read data.
 * @ubi: UBI device description object
 * @vol: volume description object
 * @lnum: logical eraseblock number
 * @buf: buffer to store the read data
 * @offset: offset from where to read
 * @len: how many bytes to read
 * @check: data CRC check flag
 *
 * If the logical eraseblock @lnum is unmapped, @buf is filled with 0xFF
 * bytes. The @check flag only makes sense for static volumes and forces
 * eraseblock data CRC checking.
 *
 * In case of success this function returns zero. In case of a static volume,
 * if data CRC mismatches - %-EBADMSG is returned. %-EBADMSG may also be
 * returned for any volume type if an ECC error was detected by the MTD device
 * driver. Other negative error cored may be returned in case of other errors.
 */
int ubi_eba_read_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
                     void *buf, int offset, int len, int check)
{
        int err, pnum, scrub = 0, vol_id = vol->vol_id;
        struct ubi_vid_hdr *vid_hdr;
        uint32_t uninitialized_var(crc);

        err = leb_read_lock(ubi, vol_id, lnum);
        if (err)
                return err;

        pnum = vol->eba_tbl[lnum];
        if (pnum < 0) {
                /*
                 * The logical eraseblock is not mapped, fill the whole buffer
                 * with 0xFF bytes. The exception is static volumes for which
                 * it is an error to read unmapped logical eraseblocks.
                 */
                dbg_eba("read %d bytes from offset %d of LEB %d:%d (unmapped)",
                        len, offset, vol_id, lnum);
                leb_read_unlock(ubi, vol_id, lnum);
                ubi_assert(vol->vol_type != UBI_STATIC_VOLUME);
                memset(buf, 0xFF, len);
                return 0;
        }

        dbg_eba("read %d bytes from offset %d of LEB %d:%d, PEB %d",
                len, offset, vol_id, lnum, pnum);

        if (vol->vol_type == UBI_DYNAMIC_VOLUME)
                check = 0;

retry:
        if (check) {
                vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
                if (!vid_hdr) {
                        err = -ENOMEM;
                        goto out_unlock;
                }

                err = ubi_io_read_vid_hdr(ubi, pnum, vid_hdr, 1);
                if (err && err != UBI_IO_BITFLIPS) {
                        if (err > 0) {
                                /*
                                 * The header is either absent or corrupted.
                                 * The former case means there is a bug -
                                 * switch to read-only mode just in case.
                                 * The latter case means a real corruption - we
                                 * may try to recover data. FIXME: but this is
                                 * not implemented.
                                 */
                                if (err == UBI_IO_BAD_HDR_EBADMSG ||
                                    err == UBI_IO_BAD_HDR) {
                                        ubi_warn(ubi, "corrupted VID header at PEB %d, LEB %d:%d",
                                                 pnum, vol_id, lnum);
                                        err = -EBADMSG;
                                } else {
                                        err = -EINVAL;
                                        ubi_ro_mode(ubi);
                                }
                        }
                        goto out_free;
                } else if (err == UBI_IO_BITFLIPS)
                        scrub = 1;

                ubi_assert(lnum < be32_to_cpu(vid_hdr->used_ebs));
                ubi_assert(len == be32_to_cpu(vid_hdr->data_size));

                crc = be32_to_cpu(vid_hdr->data_crc);
                ubi_free_vid_hdr(ubi, vid_hdr);
        }

        err = ubi_io_read_data(ubi, buf, pnum, offset, len);
        if (err) {
                if (err == UBI_IO_BITFLIPS)
                        scrub = 1;
                else if (mtd_is_eccerr(err)) {
                        if (vol->vol_type == UBI_DYNAMIC_VOLUME)
                                goto out_unlock;
                        scrub = 1;
                        if (!check) {
                                ubi_msg(ubi, "force data checking");
                                check = 1;
                                goto retry;
                        }
                } else
                        goto out_unlock;
        }

        if (check) {
                uint32_t crc1 = crc32(UBI_CRC32_INIT, buf, len);
                if (crc1 != crc) {
                        ubi_warn(ubi, "CRC error: calculated %#08x, must be %#08x",
                                 crc1, crc);
                        err = -EBADMSG;
                        goto out_unlock;
                }
        }

        if (scrub)
                err = ubi_wl_scrub_peb(ubi, pnum);

        leb_read_unlock(ubi, vol_id, lnum);
        return err;

out_free:
        ubi_free_vid_hdr(ubi, vid_hdr);
out_unlock:
        leb_read_unlock(ubi, vol_id, lnum);
        return err;
}

#ifndef __UBOOT__
/**
 * ubi_eba_read_leb_sg - read data into a scatter gather list.
 * @ubi: UBI device description object
 * @vol: volume description object
 * @lnum: logical eraseblock number
 * @sgl: UBI scatter gather list to store the read data
 * @offset: offset from where to read
 * @len: how many bytes to read
 * @check: data CRC check flag
 *
 * This function works exactly like ubi_eba_read_leb(). But instead of
 * storing the read data into a buffer it writes to an UBI scatter gather
 * list.
 */
int ubi_eba_read_leb_sg(struct ubi_device *ubi, struct ubi_volume *vol,
                        struct ubi_sgl *sgl, int lnum, int offset, int len,
                        int check)
{
        int to_read;
        int ret;
        struct scatterlist *sg;

        for (;;) {
                ubi_assert(sgl->list_pos < UBI_MAX_SG_COUNT);
                sg = &sgl->sg[sgl->list_pos];
                if (len < sg->length - sgl->page_pos)
                        to_read = len;
                else
                        to_read = sg->length - sgl->page_pos;

                ret = ubi_eba_read_leb(ubi, vol, lnum,
                                       sg_virt(sg) + sgl->page_pos, offset,
                                       to_read, check);
                if (ret < 0)
                        return ret;

                offset += to_read;
                len -= to_read;
                if (!len) {
                        sgl->page_pos += to_read;
                        if (sgl->page_pos == sg->length) {
                                sgl->list_pos++;
                                sgl->page_pos = 0;
                        }

                        break;
                }

                sgl->list_pos++;
                sgl->page_pos = 0;
        }

        return ret;
}
#endif

/**
 * recover_peb - recover from write failure.
 * @ubi: UBI device description object
 * @pnum: the physical eraseblock to recover
 * @vol_id: volume ID
 * @lnum: logical eraseblock number
 * @buf: data which was not written because of the write failure
 * @offset: offset of the failed write
 * @len: how many bytes should have been written
 *
 * This function is called in case of a write failure and moves all good data
 * from the potentially bad physical eraseblock to a good physical eraseblock.
 * This function also writes the data which was not written due to the failure.
 * Returns new physical eraseblock number in case of success, and a negative
 * error code in case of failure.
 */
static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
                       const void *buf, int offset, int len)
{
        int err, idx = vol_id2idx(ubi, vol_id), new_pnum, data_size, tries = 0;
        struct ubi_volume *vol = ubi->volumes[idx];
        struct ubi_vid_hdr *vid_hdr;

        vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
        if (!vid_hdr)
                return -ENOMEM;

retry:
        new_pnum = ubi_wl_get_peb(ubi);
        if (new_pnum < 0) {
                ubi_free_vid_hdr(ubi, vid_hdr);
                up_read(&ubi->fm_eba_sem);
                return new_pnum;
        }

        ubi_msg(ubi, "recover PEB %d, move data to PEB %d",
                pnum, new_pnum);

        err = ubi_io_read_vid_hdr(ubi, pnum, vid_hdr, 1);
        if (err && err != UBI_IO_BITFLIPS) {
                if (err > 0)
                        err = -EIO;
                up_read(&ubi->fm_eba_sem);
                goto out_put;
        }

        vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
        err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr);
        if (err) {
                up_read(&ubi->fm_eba_sem);
                goto write_error;
        }

        data_size = offset + len;
        mutex_lock(&ubi->buf_mutex);
        memset(ubi->peb_buf + offset, 0xFF, len);

        /* Read everything before the area where the write failure happened */
        if (offset > 0) {
                err = ubi_io_read_data(ubi, ubi->peb_buf, pnum, 0, offset);
                if (err && err != UBI_IO_BITFLIPS) {
                        up_read(&ubi->fm_eba_sem);
                        goto out_unlock;
                }
        }

        memcpy(ubi->peb_buf + offset, buf, len);

        err = ubi_io_write_data(ubi, ubi->peb_buf, new_pnum, 0, data_size);
        if (err) {
                mutex_unlock(&ubi->buf_mutex);
                up_read(&ubi->fm_eba_sem);
                goto write_error;
        }

        mutex_unlock(&ubi->buf_mutex);
        ubi_free_vid_hdr(ubi, vid_hdr);

        vol->eba_tbl[lnum] = new_pnum;
        up_read(&ubi->fm_eba_sem);
        ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);

        ubi_msg(ubi, "data was successfully recovered");
        return 0;

out_unlock:
        mutex_unlock(&ubi->buf_mutex);
out_put:
        ubi_wl_put_peb(ubi, vol_id, lnum, new_pnum, 1);
        ubi_free_vid_hdr(ubi, vid_hdr);
        return err;

write_error:
        /*
         * Bad luck? This physical eraseblock is bad too? Crud. Let's try to
         * get another one.
         */
        ubi_warn(ubi, "failed to write to PEB %d", new_pnum);
        ubi_wl_put_peb(ubi, vol_id, lnum, new_pnum, 1);
        if (++tries > UBI_IO_RETRIES) {
                ubi_free_vid_hdr(ubi, vid_hdr);
                return err;
        }
        ubi_msg(ubi, "try again");
        goto retry;
}

/**
 * ubi_eba_write_leb - write data to dynamic volume.
 * @ubi: UBI device description object
 * @vol: volume description object
 * @lnum: logical eraseblock number
 * @buf: the data to write
 * @offset: offset within the logical eraseblock where to write
 * @len: how many bytes to write
 *
 * This function writes data to logical eraseblock @lnum of a dynamic volume
 * @vol. Returns zero in case of success and a negative error code in case
 * of failure. In case of error, it is possible that something was still
 * written to the flash media, but may be some garbage.
 */
int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
                      const void *buf, int offset, int len)
{
        int err, pnum, tries = 0, vol_id = vol->vol_id;
        struct ubi_vid_hdr *vid_hdr;

        if (ubi->ro_mode)
                return -EROFS;

        err = leb_write_lock(ubi, vol_id, lnum);
        if (err)
                return err;

        pnum = vol->eba_tbl[lnum];
        if (pnum >= 0) {
                dbg_eba("write %d bytes at offset %d of LEB %d:%d, PEB %d",
                        len, offset, vol_id, lnum, pnum);

                err = ubi_io_write_data(ubi, buf, pnum, offset, len);
                if (err) {
                        ubi_warn(ubi, "failed to write data to PEB %d", pnum);
                        if (err == -EIO && ubi->bad_allowed)
                                err = recover_peb(ubi, pnum, vol_id, lnum, buf,
                                                  offset, len);
                        if (err)
                                ubi_ro_mode(ubi);
                }
                leb_write_unlock(ubi, vol_id, lnum);
                return err;
        }

        /*
         * The logical eraseblock is not mapped. We have to get a free physical
         * eraseblock and write the volume identifier header there first.
         */
        vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
        if (!vid_hdr) {
                leb_write_unlock(ubi, vol_id, lnum);
                return -ENOMEM;
        }

        vid_hdr->vol_type = UBI_VID_DYNAMIC;
        vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
        vid_hdr->vol_id = cpu_to_be32(vol_id);
        vid_hdr->lnum = cpu_to_be32(lnum);
        vid_hdr->compat = ubi_get_compat(ubi, vol_id);
        vid_hdr->data_pad = cpu_to_be32(vol->data_pad);

retry:
        pnum = ubi_wl_get_peb(ubi);
        if (pnum < 0) {
                ubi_free_vid_hdr(ubi, vid_hdr);
                leb_write_unlock(ubi, vol_id, lnum);
                up_read(&ubi->fm_eba_sem);
                return pnum;
        }

        dbg_eba("write VID hdr and %d bytes at offset %d of LEB %d:%d, PEB %d",
                len, offset, vol_id, lnum, pnum);

        err = ubi_io_write_vid_hdr(ubi, pnum, vid_hdr);
        if (err) {
                ubi_warn(ubi, "failed to write VID header to LEB %d:%d, PEB %d",
                         vol_id, lnum, pnum);
                up_read(&ubi->fm_eba_sem);
                goto write_error;
        }

        if (len) {
                err = ubi_io_write_data(ubi, buf, pnum, offset, len);
                if (err) {
                        ubi_warn(ubi, "failed to write %d bytes at offset %d of LEB %d:%d, PEB %d",
                                 len, offset, vol_id, lnum, pnum);
                        up_read(&ubi->fm_eba_sem);
                        goto write_error;
                }
        }

        vol->eba_tbl[lnum] = pnum;
        up_read(&ubi->fm_eba_sem);

        leb_write_unlock(ubi, vol_id, lnum);
        ubi_free_vid_hdr(ubi, vid_hdr);
        return 0;

write_error:
        if (err != -EIO || !ubi->bad_allowed) {
                ubi_ro_mode(ubi);
                leb_write_unlock(ubi, vol_id, lnum);
                ubi_free_vid_hdr(ubi, vid_hdr);
                return err;
        }

        /*
         * Fortunately, this is the first write operation to this physical
         * eraseblock, so just put it and request a new one. We assume that if
         * this physical eraseblock went bad, the erase code will handle that.
         */
        err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
        if (err || ++tries > UBI_IO_RETRIES) {
                ubi_ro_mode(ubi);
                leb_write_unlock(ubi, vol_id, lnum);
                ubi_free_vid_hdr(ubi, vid_hdr);
                return err;
        }

        vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
        ubi_msg(ubi, "try another PEB");
        goto retry;
}

/**
 * ubi_eba_write_leb_st - write data to static volume.
 * @ubi: UBI device description object
 * @vol: volume description object
 * @lnum: logical eraseblock number
 * @buf: data to write
 * @len: how many bytes to write
 * @used_ebs: how many logical eraseblocks will this volume contain
 *
 * This function writes data to logical eraseblock @lnum of static volume
 * @vol. The @used_ebs argument should contain total number of logical
 * eraseblock in this static volume.
 *
 * When writing to the last logical eraseblock, the @len argument doesn't have
 * to be aligned to the minimal I/O unit size. Instead, it has to be equivalent
 * to the real data size, although the @buf buffer has to contain the
 * alignment. In all other cases, @len has to be aligned.
 *
 * It is prohibited to write more than once to logical eraseblocks of static
 * volumes. This function returns zero in case of success and a negative error
 * code in case of failure.
 */
int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
                         int lnum, const void *buf, int len, int used_ebs)
{
        int err, pnum, tries = 0, data_size = len, vol_id = vol->vol_id;
        struct ubi_vid_hdr *vid_hdr;
        uint32_t crc;

        if (ubi->ro_mode)
                return -EROFS;

        if (lnum == used_ebs - 1)
                /* If this is the last LEB @len may be unaligned */
                len = ALIGN(data_size, ubi->min_io_size);
        else
                ubi_assert(!(len & (ubi->min_io_size - 1)));

        vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
        if (!vid_hdr)
                return -ENOMEM;

        err = leb_write_lock(ubi, vol_id, lnum);
        if (err) {
                ubi_free_vid_hdr(ubi, vid_hdr);
                return err;
        }

        vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
        vid_hdr->vol_id = cpu_to_be32(vol_id);
        vid_hdr->lnum = cpu_to_be32(lnum);
        vid_hdr->compat = ubi_get_compat(ubi, vol_id);
        vid_hdr->data_pad = cpu_to_be32(vol->data_pad);

        crc = crc32(UBI_CRC32_INIT, buf, data_size);
        vid_hdr->vol_type = UBI_VID_STATIC;
        vid_hdr->data_size = cpu_to_be32(data_size);
        vid_hdr->used_ebs = cpu_to_be32(used_ebs);
        vid_hdr->data_crc = cpu_to_be32(crc);

retry:
        pnum = ubi_wl_get_peb(ubi);
        if (pnum < 0) {
                ubi_free_vid_hdr(ubi, vid_hdr);
                leb_write_unlock(ubi, vol_id, lnum);
                up_read(&ubi->fm_eba_sem);
                return pnum;
        }

        dbg_eba("write VID hdr and %d bytes at LEB %d:%d, PEB %d, used_ebs %d",
                len, vol_id, lnum, pnum, used_ebs);

        err = ubi_io_write_vid_hdr(ubi, pnum, vid_hdr);
        if (err) {
                ubi_warn(ubi, "failed to write VID header to LEB %d:%d, PEB %d",
                         vol_id, lnum, pnum);
                up_read(&ubi->fm_eba_sem);
                goto write_error;
        }

        err = ubi_io_write_data(ubi, buf, pnum, 0, len);
        if (err) {
                ubi_warn(ubi, "failed to write %d bytes of data to PEB %d",
                         len, pnum);
                up_read(&ubi->fm_eba_sem);
                goto write_error;
        }

        ubi_assert(vol->eba_tbl[lnum] < 0);
        vol->eba_tbl[lnum] = pnum;
        up_read(&ubi->fm_eba_sem);

        leb_write_unlock(ubi, vol_id, lnum);
        ubi_free_vid_hdr(ubi, vid_hdr);
        return 0;

write_error:
        if (err != -EIO || !ubi->bad_allowed) {
                /*
                 * This flash device does not admit of bad eraseblocks or
                 * something nasty and unexpected happened. Switch to read-only
                 * mode just in case.
                 */
                ubi_ro_mode(ubi);
                leb_write_unlock(ubi, vol_id, lnum);
                ubi_free_vid_hdr(ubi, vid_hdr);
                return err;
        }

        err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
        if (err || ++tries > UBI_IO_RETRIES) {
                ubi_ro_mode(ubi);
                leb_write_unlock(ubi, vol_id, lnum);
                ubi_free_vid_hdr(ubi, vid_hdr);
                return err;
        }

        vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
        ubi_msg(ubi, "try another PEB");
        goto retry;
}

/*
 * ubi_eba_atomic_leb_change - change logical eraseblock atomically.
 * @ubi: UBI device description object
 * @vol: volume description object
 * @lnum: logical eraseblock number
 * @buf: data to write
 * @len: how many bytes to write
 *
 * This function changes the contents of a logical eraseblock atomically. @buf
 * has to contain new logical eraseblock data, and @len - the length of the
 * data, which has to be aligned. This function guarantees that in case of an
 * unclean reboot the old contents is preserved. Returns zero in case of
 * success and a negative error code in case of failure.
 *
 * UBI reserves one LEB for the "atomic LEB change" operation, so only one
 * LEB change may be done at a time. This is ensured by @ubi->alc_mutex.
 */
int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
                              int lnum, const void *buf, int len)
{
        int err, pnum, old_pnum, tries = 0, vol_id = vol->vol_id;
        struct ubi_vid_hdr *vid_hdr;
        uint32_t crc;

        if (ubi->ro_mode)
                return -EROFS;

        if (len == 0) {
                /*
                 * Special case when data length is zero. In this case the LEB
                 * has to be unmapped and mapped somewhere else.
                 */
                err = ubi_eba_unmap_leb(ubi, vol, lnum);
                if (err)
                        return err;
                return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0);
        }

        vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
        if (!vid_hdr)
                return -ENOMEM;

        mutex_lock(&ubi->alc_mutex);
        err = leb_write_lock(ubi, vol_id, lnum);
        if (err)
                goto out_mutex;

        vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
        vid_hdr->vol_id = cpu_to_be32(vol_id);
        vid_hdr->lnum = cpu_to_be32(lnum);
        vid_hdr->compat = ubi_get_compat(ubi, vol_id);
        vid_hdr->data_pad = cpu_to_be32(vol->data_pad);

        crc = crc32(UBI_CRC32_INIT, buf, len);
        vid_hdr->vol_type = UBI_VID_DYNAMIC;
        vid_hdr->data_size = cpu_to_be32(len);
        vid_hdr->copy_flag = 1;
        vid_hdr->data_crc = cpu_to_be32(crc);

retry:
        pnum = ubi_wl_get_peb(ubi);
        if (pnum < 0) {
                err = pnum;
                up_read(&ubi->fm_eba_sem);
                goto out_leb_unlock;
        }

        dbg_eba("change LEB %d:%d, PEB %d, write VID hdr to PEB %d",
                vol_id, lnum, vol->eba_tbl[lnum], pnum);

        err = ubi_io_write_vid_hdr(ubi, pnum, vid_hdr);
        if (err) {
                ubi_warn(ubi, "failed to write VID header to LEB %d:%d, PEB %d",
                         vol_id, lnum, pnum);
                up_read(&ubi->fm_eba_sem);
                goto write_error;
        }

        err = ubi_io_write_data(ubi, buf, pnum, 0, len);
        if (err) {
                ubi_warn(ubi, "failed to write %d bytes of data to PEB %d",
                         len, pnum);
                up_read(&ubi->fm_eba_sem);
                goto write_error;
        }

        old_pnum = vol->eba_tbl[lnum];
        vol->eba_tbl[lnum] = pnum;
        up_read(&ubi->fm_eba_sem);

        if (old_pnum >= 0) {
                err = ubi_wl_put_peb(ubi, vol_id, lnum, old_pnum, 0);
                if (err)
                        goto out_leb_unlock;
        }

out_leb_unlock:
        leb_write_unlock(ubi, vol_id, lnum);
out_mutex:
        mutex_unlock(&ubi->alc_mutex);
        ubi_free_vid_hdr(ubi, vid_hdr);
        return err;

write_error:
        if (err != -EIO || !ubi->bad_allowed) {
                /*
                 * This flash device does not admit of bad eraseblocks or
                 * something nasty and unexpected happened. Switch to read-only
                 * mode just in case.
                 */
                ubi_ro_mode(ubi);
                goto out_leb_unlock;
        }

        err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
        if (err || ++tries > UBI_IO_RETRIES) {
                ubi_ro_mode(ubi);
                goto out_leb_unlock;
        }

        vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
        ubi_msg(ubi, "try another PEB");
        goto retry;
}

/**
 * is_error_sane - check whether a read error is sane.
 * @err: code of the error happened during reading
 *
 * This is a helper function for 'ubi_eba_copy_leb()' which is called when we
 * cannot read data from the target PEB (an error @err happened). If the error
 * code is sane, then we treat this error as non-fatal. Otherwise the error is
 * fatal and UBI will be switched to R/O mode later.
 *
 * The idea is that we try not to switch to R/O mode if the read error is
 * something which suggests there was a real read problem. E.g., %-EIO. Or a
 * memory allocation failed (-%ENOMEM). Otherwise, it is safer to switch to R/O
 * mode, simply because we do not know what happened at the MTD level, and we
 * cannot handle this. E.g., the underlying driver may have become crazy, and
 * it is safer to switch to R/O mode to preserve the data.
 *
 * And bear in mind, this is about reading from the target PEB, i.e. the PEB
 * which we have just written.
 */
static int is_error_sane(int err)
{
        if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_HDR ||
            err == UBI_IO_BAD_HDR_EBADMSG || err == -ETIMEDOUT)
                return 0;
        return 1;
}

/**
 * ubi_eba_copy_leb - copy logical eraseblock.
 * @ubi: UBI device description object
 * @from: physical eraseblock number from where to copy
 * @to: physical eraseblock number where to copy
 * @vid_hdr: VID header of the @from physical eraseblock
 *
 * This function copies logical eraseblock from physical eraseblock @from to
 * physical eraseblock @to. The @vid_hdr buffer may be changed by this
 * function. Returns:
 *   o %0 in case of success;
 *   o %MOVE_CANCEL_RACE, %MOVE_TARGET_WR_ERR, %MOVE_TARGET_BITFLIPS, etc;
 *   o a negative error code in case of failure.
 */
int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
                     struct ubi_vid_hdr *vid_hdr)
{
        int err, vol_id, lnum, data_size, aldata_size, idx;
        struct ubi_volume *vol;
        uint32_t crc;

        vol_id = be32_to_cpu(vid_hdr->vol_id);
        lnum = be32_to_cpu(vid_hdr->lnum);

        dbg_wl("copy LEB %d:%d, PEB %d to PEB %d", vol_id, lnum, from, to);

        if (vid_hdr->vol_type == UBI_VID_STATIC) {
                data_size = be32_to_cpu(vid_hdr->data_size);
                aldata_size = ALIGN(data_size, ubi->min_io_size);
        } else
                data_size = aldata_size =
                            ubi->leb_size - be32_to_cpu(vid_hdr->data_pad);

        idx = vol_id2idx(ubi, vol_id);
        spin_lock(&ubi->volumes_lock);
        /*
         * Note, we may race with volume deletion, which means that the volume
         * this logical eraseblock belongs to might be being deleted. Since the
         * volume deletion un-maps all the volume's logical eraseblocks, it will
         * be locked in 'ubi_wl_put_peb()' and wait for the WL worker to finish.
         */
        vol = ubi->volumes[idx];
        spin_unlock(&ubi->volumes_lock);
        if (!vol) {
                /* No need to do further work, cancel */
                dbg_wl("volume %d is being removed, cancel", vol_id);
                return MOVE_CANCEL_RACE;
        }

        /*
         * We do not want anybody to write to this logical eraseblock while we
         * are moving it, so lock it.
         *
         * Note, we are using non-waiting locking here, because we cannot sleep
         * on the LEB, since it may cause deadlocks. Indeed, imagine a task is
         * unmapping the LEB which is mapped to the PEB we are going to move
         * (@from). This task locks the LEB and goes sleep in the
         * 'ubi_wl_put_peb()' function on the @ubi->move_mutex. In turn, we are
         * holding @ubi->move_mutex and go sleep on the LEB lock. So, if the
         * LEB is already locked, we just do not move it and return
         * %MOVE_RETRY. Note, we do not return %MOVE_CANCEL_RACE here because
         * we do not know the reasons of the contention - it may be just a
         * normal I/O on this LEB, so we want to re-try.
         */
        err = leb_write_trylock(ubi, vol_id, lnum);
        if (err) {
                dbg_wl("contention on LEB %d:%d, cancel", vol_id, lnum);
                return MOVE_RETRY;
        }

        /*
         * The LEB might have been put meanwhile, and the task which put it is
         * probably waiting on @ubi->move_mutex. No need to continue the work,
         * cancel it.
         */
        if (vol->eba_tbl[lnum] != from) {
                dbg_wl("LEB %d:%d is no longer mapped to PEB %d, mapped to PEB %d, cancel",
                       vol_id, lnum, from, vol->eba_tbl[lnum]);
                err = MOVE_CANCEL_RACE;
                goto out_unlock_leb;
        }

        /*
         * OK, now the LEB is locked and we can safely start moving it. Since
         * this function utilizes the @ubi->peb_buf buffer which is shared
         * with some other functions - we lock the buffer by taking the
         * @ubi->buf_mutex.
         */
        mutex_lock(&ubi->buf_mutex);
        dbg_wl("read %d bytes of data", aldata_size);
        err = ubi_io_read_data(ubi, ubi->peb_buf, from, 0, aldata_size);
        if (err && err != UBI_IO_BITFLIPS) {
                ubi_warn(ubi, "error %d while reading data from PEB %d",
                         err, from);
                err = MOVE_SOURCE_RD_ERR;
                goto out_unlock_buf;
        }

        /*
         * Now we have got to calculate how much data we have to copy. In
         * case of a static volume it is fairly easy - the VID header contains
         * the data size. In case of a dynamic volume it is more difficult - we
         * have to read the contents, cut 0xFF bytes from the end and copy only
         * the first part. We must do this to avoid writing 0xFF bytes as it
         * may have some side-effects. And not only this. It is important not
         * to include those 0xFFs to CRC because later the they may be filled
         * by data.
         */
        if (vid_hdr->vol_type == UBI_VID_DYNAMIC)
                aldata_size = data_size =
                        ubi_calc_data_len(ubi, ubi->peb_buf, data_size);

        cond_resched();
        crc = crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size);
        cond_resched();

        /*
         * It may turn out to be that the whole @from physical eraseblock
         * contains only 0xFF bytes. Then we have to only write the VID header
         * and do not write any data. This also means we should not set
         * @vid_hdr->copy_flag, @vid_hdr->data_size, and @vid_hdr->data_crc.
         */
        if (data_size > 0) {
                vid_hdr->copy_flag = 1;
                vid_hdr->data_size = cpu_to_be32(data_size);
                vid_hdr->data_crc = cpu_to_be32(crc);
        }
        vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));

        err = ubi_io_write_vid_hdr(ubi, to, vid_hdr);
        if (err) {
                if (err == -EIO)
                        err = MOVE_TARGET_WR_ERR;
                goto out_unlock_buf;
        }

        cond_resched();

        /* Read the VID header back and check if it was written correctly */
        err = ubi_io_read_vid_hdr(ubi, to, vid_hdr, 1);
        if (err) {
                if (err != UBI_IO_BITFLIPS) {
                        ubi_warn(ubi, "error %d while reading VID header back from PEB %d",
                                 err, to);
                        if (is_error_sane(err))
                                err = MOVE_TARGET_RD_ERR;
                } else
                        err = MOVE_TARGET_BITFLIPS;
                goto out_unlock_buf;
        }

        if (data_size > 0) {
                err = ubi_io_write_data(ubi, ubi->peb_buf, to, 0, aldata_size);
                if (err) {
                        if (err == -EIO)
                                err = MOVE_TARGET_WR_ERR;
                        goto out_unlock_buf;
                }

                cond_resched();

                /*
                 * We've written the data and are going to read it back to make
                 * sure it was written correctly.
                 */
                memset(ubi->peb_buf, 0xFF, aldata_size);
                err = ubi_io_read_data(ubi, ubi->peb_buf, to, 0, aldata_size);
                if (err) {
                        if (err != UBI_IO_BITFLIPS) {
                                ubi_warn(ubi, "error %d while reading data back from PEB %d",
                                         err, to);
                                if (is_error_sane(err))
                                        err = MOVE_TARGET_RD_ERR;
                        } else
                                err = MOVE_TARGET_BITFLIPS;
                        goto out_unlock_buf;
                }

                cond_resched();

                if (crc != crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size)) {
                        ubi_warn(ubi, "read data back from PEB %d and it is different",
                                 to);
                        err = -EINVAL;
                        goto out_unlock_buf;
                }
        }

        ubi_assert(vol->eba_tbl[lnum] == from);
        down_read(&ubi->fm_eba_sem);
        vol->eba_tbl[lnum] = to;
        up_read(&ubi->fm_eba_sem);

out_unlock_buf:
        mutex_unlock(&ubi->buf_mutex);
out_unlock_leb:
        leb_write_unlock(ubi, vol_id, lnum);
        return err;
}

/**
 * print_rsvd_warning - warn about not having enough reserved PEBs.
 * @ubi: UBI device description object
 *
 * This is a helper function for 'ubi_eba_init()' which is called when UBI
 * cannot reserve enough PEBs for bad block handling. This function makes a
 * decision whether we have to print a warning or not. The algorithm is as
 * follows:
 *   o if this is a new UBI image, then just print the warning
 *   o if this is an UBI image which has already been used for some time, print
 *     a warning only if we can reserve less than 10% of the expected amount of
 *     the reserved PEB.
 *
 * The idea is that when UBI is used, PEBs become bad, and the reserved pool
 * of PEBs becomes smaller, which is normal and we do not want to scare users
 * with a warning every time they attach the MTD device. This was an issue
 * reported by real users.
 */
static void print_rsvd_warning(struct ubi_device *ubi,
                               struct ubi_attach_info *ai)
{
        /*
         * The 1 << 18 (256KiB) number is picked randomly, just a reasonably
         * large number to distinguish between newly flashed and used images.
         */
        if (ai->max_sqnum > (1 << 18)) {
                int min = ubi->beb_rsvd_level / 10;

                if (!min)
                        min = 1;
                if (ubi->beb_rsvd_pebs > min)
                        return;
        }

        ubi_warn(ubi, "cannot reserve enough PEBs for bad PEB handling, reserved %d, need %d",
                 ubi->beb_rsvd_pebs, ubi->beb_rsvd_level);
        if (ubi->corr_peb_count)
                ubi_warn(ubi, "%d PEBs are corrupted and not used",
                         ubi->corr_peb_count);
}

/**
 * self_check_eba - run a self check on the EBA table constructed by fastmap.
 * @ubi: UBI device description object
 * @ai_fastmap: UBI attach info object created by fastmap
 * @ai_scan: UBI attach info object created by scanning
 *
 * Returns < 0 in case of an internal error, 0 otherwise.
 * If a bad EBA table entry was found it will be printed out and
 * ubi_assert() triggers.
 */
int self_check_eba(struct ubi_device *ubi, struct ubi_attach_info *ai_fastmap,
                   struct ubi_attach_info *ai_scan)
{
        int i, j, num_volumes, ret = 0;
        int **scan_eba, **fm_eba;
        struct ubi_ainf_volume *av;
        struct ubi_volume *vol;
        struct ubi_ainf_peb *aeb;
        struct rb_node *rb;

        num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;

        scan_eba = kmalloc(sizeof(*scan_eba) * num_volumes, GFP_KERNEL);
        if (!scan_eba)
                return -ENOMEM;

        fm_eba = kmalloc(sizeof(*fm_eba) * num_volumes, GFP_KERNEL);
        if (!fm_eba) {
                kfree(scan_eba);
                return -ENOMEM;
        }

        for (i = 0; i < num_volumes; i++) {
                vol = ubi->volumes[i];
                if (!vol)
                        continue;

                scan_eba[i] = kmalloc(vol->reserved_pebs * sizeof(**scan_eba),
                                      GFP_KERNEL);
                if (!scan_eba[i]) {
                        ret = -ENOMEM;
                        goto out_free;
                }

                fm_eba[i] = kmalloc(vol->reserved_pebs * sizeof(**fm_eba),
                                    GFP_KERNEL);
                if (!fm_eba[i]) {
                        ret = -ENOMEM;
                        goto out_free;
                }

                for (j = 0; j < vol->reserved_pebs; j++)
                        scan_eba[i][j] = fm_eba[i][j] = UBI_LEB_UNMAPPED;

                av = ubi_find_av(ai_scan, idx2vol_id(ubi, i));
                if (!av)
                        continue;

                ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb)
                        scan_eba[i][aeb->lnum] = aeb->pnum;

                av = ubi_find_av(ai_fastmap, idx2vol_id(ubi, i));
                if (!av)
                        continue;

                ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb)
                        fm_eba[i][aeb->lnum] = aeb->pnum;

                for (j = 0; j < vol->reserved_pebs; j++) {
                        if (scan_eba[i][j] != fm_eba[i][j]) {
                                if (scan_eba[i][j] == UBI_LEB_UNMAPPED ||
                                        fm_eba[i][j] == UBI_LEB_UNMAPPED)
                                        continue;

                                ubi_err(ubi, "LEB:%i:%i is PEB:%i instead of %i!",
                                        vol->vol_id, i, fm_eba[i][j],
                                        scan_eba[i][j]);
                                ubi_assert(0);
                        }
                }
        }

out_free:
        for (i = 0; i < num_volumes; i++) {
                if (!ubi->volumes[i])
                        continue;

                kfree(scan_eba[i]);
                kfree(fm_eba[i]);
        }

        kfree(scan_eba);
        kfree(fm_eba);
        return ret;
}

/**
 * ubi_eba_init - initialize the EBA sub-system using attaching information.
 * @ubi: UBI device description object
 * @ai: attaching information
 *
 * This function returns zero in case of success and a negative error code in
 * case of failure.
 */
int ubi_eba_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
{
        int i, j, err, num_volumes;
        struct ubi_ainf_volume *av;
        struct ubi_volume *vol;
        struct ubi_ainf_peb *aeb;
        struct rb_node *rb;

        dbg_eba("initialize EBA sub-system");

        spin_lock_init(&ubi->ltree_lock);
        mutex_init(&ubi->alc_mutex);
        ubi->ltree = RB_ROOT;

        ubi->global_sqnum = ai->max_sqnum + 1;
        num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;

        for (i = 0; i < num_volumes; i++) {
                vol = ubi->volumes[i];
                if (!vol)
                        continue;

                cond_resched();

                vol->eba_tbl = kmalloc(vol->reserved_pebs * sizeof(int),
                                       GFP_KERNEL);
                if (!vol->eba_tbl) {
                        err = -ENOMEM;
                        goto out_free;
                }

                for (j = 0; j < vol->reserved_pebs; j++)
                        vol->eba_tbl[j] = UBI_LEB_UNMAPPED;

                av = ubi_find_av(ai, idx2vol_id(ubi, i));
                if (!av)
                        continue;

                ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb) {
                        if (aeb->lnum >= vol->reserved_pebs)
                                /*
                                 * This may happen in case of an unclean reboot
                                 * during re-size.
                                 */
                                ubi_move_aeb_to_list(av, aeb, &ai->erase);
                        else
                                vol->eba_tbl[aeb->lnum] = aeb->pnum;
                }
        }

        if (ubi->avail_pebs < EBA_RESERVED_PEBS) {
                ubi_err(ubi, "no enough physical eraseblocks (%d, need %d)",
                        ubi->avail_pebs, EBA_RESERVED_PEBS);
                if (ubi->corr_peb_count)
                        ubi_err(ubi, "%d PEBs are corrupted and not used",
                                ubi->corr_peb_count);
                err = -ENOSPC;
                goto out_free;
        }
        ubi->avail_pebs -= EBA_RESERVED_PEBS;
        ubi->rsvd_pebs += EBA_RESERVED_PEBS;

        if (ubi->bad_allowed) {
                ubi_calculate_reserved(ubi);

                if (ubi->avail_pebs < ubi->beb_rsvd_level) {
                        /* No enough free physical eraseblocks */
                        ubi->beb_rsvd_pebs = ubi->avail_pebs;
                        print_rsvd_warning(ubi, ai);
                } else
                        ubi->beb_rsvd_pebs = ubi->beb_rsvd_level;

                ubi->avail_pebs -= ubi->beb_rsvd_pebs;
                ubi->rsvd_pebs  += ubi->beb_rsvd_pebs;
        }

        dbg_eba("EBA sub-system is initialized");
        return 0;

out_free:
        for (i = 0; i < num_volumes; i++) {
                if (!ubi->volumes[i])
                        continue;
                kfree(ubi->volumes[i]->eba_tbl);
                ubi->volumes[i]->eba_tbl = NULL;
        }
        return err;
}