git.sur5r.net Git - u-boot/blob - include/configs/T208xQDS.h

   1 /*
   2  * Copyright 2011-2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T2080/T2081 QDS board configuration file
   9  */
  10
  11 #ifndef __T208xQDS_H
  12 #define __T208xQDS_H
  13
  14 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
  15 #if defined(CONFIG_ARCH_T2080)
  16 #define CONFIG_FSL_SATA_V2
  17 #define CONFIG_SYS_SRIO         /* Enable Serial RapidIO Support */
  18 #define CONFIG_SRIO1            /* SRIO port 1 */
  19 #define CONFIG_SRIO2            /* SRIO port 2 */
  20 #elif defined(CONFIG_ARCH_T2081)
  21 #endif
  22
  23 /* High Level Configuration Options */
  24 #define CONFIG_SYS_BOOK3E_HV    /* Category E.HV supported */
  25 #define CONFIG_MP               /* support multiple processors */
  26 #define CONFIG_ENABLE_36BIT_PHYS
  27
  28 #ifdef CONFIG_PHYS_64BIT
  29 #define CONFIG_ADDR_MAP 1
  30 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
  31 #endif
  32
  33 #define CONFIG_SYS_FSL_CPC      /* Corenet Platform Cache */
  34 #define CONFIG_SYS_NUM_CPC      CONFIG_SYS_NUM_DDR_CTLRS
  35 #define CONFIG_ENV_OVERWRITE
  36
  37 #ifdef CONFIG_RAMBOOT_PBL
  38 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
  39
  40 #define CONFIG_SPL_FLUSH_IMAGE
  41 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  42 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  43 #define CONFIG_SPL_PAD_TO               0x40000
  44 #define CONFIG_SPL_MAX_SIZE             0x28000
  45 #define RESET_VECTOR_OFFSET             0x27FFC
  46 #define BOOT_PAGE_OFFSET                0x27000
  47 #ifdef CONFIG_SPL_BUILD
  48 #define CONFIG_SPL_SKIP_RELOCATE
  49 #define CONFIG_SPL_COMMON_INIT_DDR
  50 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  51 #endif
  52
  53 #ifdef CONFIG_NAND
  54 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  55 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  56 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  57 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  58 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  59 #if defined(CONFIG_ARCH_T2080)
  60 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg
  61 #elif defined(CONFIG_ARCH_T2081)
  62 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_nand_rcw.cfg
  63 #endif
  64 #define CONFIG_SPL_NAND_BOOT
  65 #endif
  66
  67 #ifdef CONFIG_SPIFLASH
  68 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  69 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  70 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  71 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  72 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  73 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  74 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  75 #ifndef CONFIG_SPL_BUILD
  76 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  77 #endif
  78 #if defined(CONFIG_ARCH_T2080)
  79 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_spi_rcw.cfg
  80 #elif defined(CONFIG_ARCH_T2081)
  81 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_spi_rcw.cfg
  82 #endif
  83 #define CONFIG_SPL_SPI_BOOT
  84 #endif
  85
  86 #ifdef CONFIG_SDCARD
  87 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  88 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  89 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
  90 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
  91 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  92 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  93 #ifndef CONFIG_SPL_BUILD
  94 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  95 #endif
  96 #if defined(CONFIG_ARCH_T2080)
  97 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_sd_rcw.cfg
  98 #elif defined(CONFIG_ARCH_T2081)
  99 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_sd_rcw.cfg
 100 #endif
 101 #define CONFIG_SPL_MMC_BOOT
 102 #endif
 103
 104 #endif /* CONFIG_RAMBOOT_PBL */
 105
 106 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 107 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 108 /* Set 1M boot space */
 109 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 110 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 111                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 112 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 113 #endif
 114
 115 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 116 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 117 #endif
 118
 119 /*
 120  * These can be toggled for performance analysis, otherwise use default.
 121  */
 122 #define CONFIG_SYS_CACHE_STASHING
 123 #define CONFIG_BTB              /* toggle branch predition */
 124 #define CONFIG_DDR_ECC
 125 #ifdef CONFIG_DDR_ECC
 126 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 127 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 128 #endif
 129
 130 #ifdef CONFIG_MTD_NOR_FLASH
 131 #define CONFIG_FLASH_CFI_DRIVER
 132 #define CONFIG_SYS_FLASH_CFI
 133 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 134 #endif
 135
 136 #if defined(CONFIG_SPIFLASH)
 137 #define CONFIG_SYS_EXTRA_ENV_RELOC
 138 #define CONFIG_ENV_SPI_BUS      0
 139 #define CONFIG_ENV_SPI_CS       0
 140 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 141 #define CONFIG_ENV_SPI_MODE     0
 142 #define CONFIG_ENV_SIZE         0x2000     /* 8KB */
 143 #define CONFIG_ENV_OFFSET       0x100000   /* 1MB */
 144 #define CONFIG_ENV_SECT_SIZE    0x10000
 145 #elif defined(CONFIG_SDCARD)
 146 #define CONFIG_SYS_EXTRA_ENV_RELOC
 147 #define CONFIG_SYS_MMC_ENV_DEV  0
 148 #define CONFIG_ENV_SIZE         0x2000
 149 #define CONFIG_ENV_OFFSET       (512 * 0x800)
 150 #elif defined(CONFIG_NAND)
 151 #define CONFIG_SYS_EXTRA_ENV_RELOC
 152 #define CONFIG_ENV_SIZE         0x2000
 153 #define CONFIG_ENV_OFFSET       (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 154 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 155 #define CONFIG_ENV_ADDR         0xffe20000
 156 #define CONFIG_ENV_SIZE         0x2000
 157 #elif defined(CONFIG_ENV_IS_NOWHERE)
 158 #define CONFIG_ENV_SIZE         0x2000
 159 #else
 160 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 161 #define CONFIG_ENV_SIZE         0x2000
 162 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 163 #endif
 164
 165 #ifndef __ASSEMBLY__
 166 unsigned long get_board_sys_clk(void);
 167 unsigned long get_board_ddr_clk(void);
 168 #endif
 169
 170 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 171 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 172
 173 /*
 174  * Config the L3 Cache as L3 SRAM
 175  */
 176 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 177 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 178 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 179 #ifdef CONFIG_RAMBOOT_PBL
 180 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 181 #endif
 182 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 183 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 184 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 185 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 186
 187 #define CONFIG_SYS_DCSRBAR      0xf0000000
 188 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
 189
 190 /* EEPROM */
 191 #define CONFIG_ID_EEPROM
 192 #define CONFIG_SYS_I2C_EEPROM_NXID
 193 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 194 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 195 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 196
 197 /*
 198  * DDR Setup
 199  */
 200 #define CONFIG_VERY_BIG_RAM
 201 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 202 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 203 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
 204 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 205 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 206 #define CONFIG_DDR_SPD
 207 #define CONFIG_FSL_DDR_INTERACTIVE
 208 #define CONFIG_SYS_SPD_BUS_NUM  0
 209 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 210 #define SPD_EEPROM_ADDRESS1     0x51
 211 #define SPD_EEPROM_ADDRESS2     0x52
 212 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 213 #define CTRL_INTLV_PREFERED     cacheline
 214
 215 /*
 216  * IFC Definitions
 217  */
 218 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 219 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 220 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 221 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 222                                 + 0x8000000) | \
 223                                 CSPR_PORT_SIZE_16 | \
 224                                 CSPR_MSEL_NOR | \
 225                                 CSPR_V)
 226 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 227 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 228                                 CSPR_PORT_SIZE_16 | \
 229                                 CSPR_MSEL_NOR | \
 230                                 CSPR_V)
 231 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 232 /* NOR Flash Timing Params */
 233 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 234
 235 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 236                                 FTIM0_NOR_TEADC(0x5) | \
 237                                 FTIM0_NOR_TEAHC(0x5))
 238 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 239                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 240                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 241 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 242                                 FTIM2_NOR_TCH(0x4) | \
 243                                 FTIM2_NOR_TWPH(0x0E) | \
 244                                 FTIM2_NOR_TWP(0x1c))
 245 #define CONFIG_SYS_NOR_FTIM3    0x0
 246
 247 #define CONFIG_SYS_FLASH_QUIET_TEST
 248 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 249
 250 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 251 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 252 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 253 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 254
 255 #define CONFIG_SYS_FLASH_EMPTY_INFO
 256 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 257                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 258
 259 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 260 #define QIXIS_BASE                      0xffdf0000
 261 #define QIXIS_LBMAP_SWITCH              6
 262 #define QIXIS_LBMAP_MASK                0x0f
 263 #define QIXIS_LBMAP_SHIFT               0
 264 #define QIXIS_LBMAP_DFLTBANK            0x00
 265 #define QIXIS_LBMAP_ALTBANK             0x04
 266 #define QIXIS_LBMAP_NAND                0x09
 267 #define QIXIS_LBMAP_SD                  0x00
 268 #define QIXIS_RCW_SRC_NAND              0x104
 269 #define QIXIS_RCW_SRC_SD                0x040
 270 #define QIXIS_RST_CTL_RESET             0x83
 271 #define QIXIS_RST_FORCE_MEM             0x1
 272 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 273 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 274 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 275 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 276
 277 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 278 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 279                                 | CSPR_PORT_SIZE_8 \
 280                                 | CSPR_MSEL_GPCM \
 281                                 | CSPR_V)
 282 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 283 #define CONFIG_SYS_CSOR3        0x0
 284 /* QIXIS Timing parameters for IFC CS3 */
 285 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 286                                         FTIM0_GPCM_TEADC(0x0e) | \
 287                                         FTIM0_GPCM_TEAHC(0x0e))
 288 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 289                                         FTIM1_GPCM_TRAD(0x3f))
 290 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 291                                         FTIM2_GPCM_TCH(0x8) | \
 292                                         FTIM2_GPCM_TWP(0x1f))
 293 #define CONFIG_SYS_CS3_FTIM3            0x0
 294
 295 /* NAND Flash on IFC */
 296 #define CONFIG_NAND_FSL_IFC
 297 #define CONFIG_SYS_NAND_BASE            0xff800000
 298 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 299
 300 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 301 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 302                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 303                                 | CSPR_MSEL_NAND         /* MSEL = NAND */ \
 304                                 | CSPR_V)
 305 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 306
 307 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 308                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 309                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */     \
 310                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */   \
 311                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */\
 312                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
 313                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 314
 315 #define CONFIG_SYS_NAND_ONFI_DETECTION
 316
 317 /* ONFI NAND Flash mode0 Timing Params */
 318 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 319                                         FTIM0_NAND_TWP(0x18)    | \
 320                                         FTIM0_NAND_TWCHT(0x07)  | \
 321                                         FTIM0_NAND_TWH(0x0a))
 322 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 323                                         FTIM1_NAND_TWBE(0x39)   | \
 324                                         FTIM1_NAND_TRR(0x0e)    | \
 325                                         FTIM1_NAND_TRP(0x18))
 326 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f)  | \
 327                                         FTIM2_NAND_TREH(0x0a)   | \
 328                                         FTIM2_NAND_TWHRE(0x1e))
 329 #define CONFIG_SYS_NAND_FTIM3           0x0
 330
 331 #define CONFIG_SYS_NAND_DDR_LAW         11
 332 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 333 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 334 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 335
 336 #if defined(CONFIG_NAND)
 337 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 338 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 339 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 340 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 341 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 342 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 343 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 344 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 345 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 346 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 347 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 348 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 349 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 350 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 351 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 352 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 353 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 354 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 355 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 356 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 357 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 358 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 359 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 360 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 361 #else
 362 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 363 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 364 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 365 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 366 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 367 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 368 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 369 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 370 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 371 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 372 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 373 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 374 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 375 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 376 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 377 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 378 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 379 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 380 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 381 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 382 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 383 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 384 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 385 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 386 #endif
 387
 388 #if defined(CONFIG_RAMBOOT_PBL)
 389 #define CONFIG_SYS_RAMBOOT
 390 #endif
 391
 392 #ifdef CONFIG_SPL_BUILD
 393 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 394 #else
 395 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 396 #endif
 397
 398 #define CONFIG_MISC_INIT_R
 399 #define CONFIG_HWCONFIG
 400
 401 /* define to use L1 as initial stack */
 402 #define CONFIG_L1_INIT_RAM
 403 #define CONFIG_SYS_INIT_RAM_LOCK
 404 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000 /* Initial L1 address */
 405 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 406 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 407 /* The assembler doesn't like typecast */
 408 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 409                         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 410                         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 411 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 412 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 413                                                 GENERATED_GBL_DATA_SIZE)
 414 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 415 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 416 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 417
 418 /*
 419  * Serial Port
 420  */
 421 #define CONFIG_SYS_NS16550_SERIAL
 422 #define CONFIG_SYS_NS16550_REG_SIZE     1
 423 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 424 #define CONFIG_SYS_BAUDRATE_TABLE       \
 425         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 426 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 427 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 428 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 429 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 430
 431 /*
 432  * I2C
 433  */
 434 #define CONFIG_SYS_I2C
 435 #define CONFIG_SYS_I2C_FSL
 436 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 437 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 438 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
 439 #define CONFIG_SYS_FSL_I2C4_SLAVE  0x7F
 440 #define CONFIG_SYS_FSL_I2C_OFFSET  0x118000
 441 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
 442 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
 443 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
 444 #define CONFIG_SYS_FSL_I2C_SPEED   100000
 445 #define CONFIG_SYS_FSL_I2C2_SPEED  100000
 446 #define CONFIG_SYS_FSL_I2C3_SPEED  100000
 447 #define CONFIG_SYS_FSL_I2C4_SPEED  100000
 448 #define I2C_MUX_PCA_ADDR_PRI    0x77 /* I2C bus multiplexer,primary */
 449 #define I2C_MUX_PCA_ADDR_SEC1   0x75 /* I2C bus multiplexer,secondary 1 */
 450 #define I2C_MUX_PCA_ADDR_SEC2   0x76 /* I2C bus multiplexer,secondary 2 */
 451 #define I2C_MUX_CH_DEFAULT      0x8
 452
 453 #define I2C_MUX_CH_VOL_MONITOR 0xa
 454
 455 /* Voltage monitor on channel 2*/
 456 #define I2C_VOL_MONITOR_ADDR           0x40
 457 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 458 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 459 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 460
 461 #define CONFIG_VID_FLS_ENV              "t208xqds_vdd_mv"
 462 #ifndef CONFIG_SPL_BUILD
 463 #define CONFIG_VID
 464 #endif
 465 #define CONFIG_VOL_MONITOR_IR36021_SET
 466 #define CONFIG_VOL_MONITOR_IR36021_READ
 467 /* The lowest and highest voltage allowed for T208xQDS */
 468 #define VDD_MV_MIN                      819
 469 #define VDD_MV_MAX                      1212
 470
 471 /*
 472  * RapidIO
 473  */
 474 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 475 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 476 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000 /* 256M */
 477 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 478 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 479 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000 /* 256M */
 480 /*
 481  * for slave u-boot IMAGE instored in master memory space,
 482  * PHYS must be aligned based on the SIZE
 483  */
 484 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 485 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 486 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 487 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 488 /*
 489  * for slave UCODE and ENV instored in master memory space,
 490  * PHYS must be aligned based on the SIZE
 491  */
 492 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 493 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 494 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 495
 496 /* slave core release by master*/
 497 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 498 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 499
 500 /*
 501  * SRIO_PCIE_BOOT - SLAVE
 502  */
 503 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 504 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 505 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 506                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 507 #endif
 508
 509 /*
 510  * eSPI - Enhanced SPI
 511  */
 512 #ifdef CONFIG_SPI_FLASH
 513 #ifndef CONFIG_SPL_BUILD
 514 #endif
 515
 516 #define CONFIG_SPI_FLASH_BAR
 517 #define CONFIG_SF_DEFAULT_SPEED  10000000
 518 #define CONFIG_SF_DEFAULT_MODE    0
 519 #endif
 520
 521 /*
 522  * General PCI
 523  * Memory space is mapped 1-1, but I/O space must start from 0.
 524  */
 525 #define CONFIG_PCIE1            /* PCIE controller 1 */
 526 #define CONFIG_PCIE2            /* PCIE controller 2 */
 527 #define CONFIG_PCIE3            /* PCIE controller 3 */
 528 #define CONFIG_PCIE4            /* PCIE controller 4 */
 529 #define CONFIG_FSL_PCIE_RESET   /* pcie reset fix link width 2x-4x*/
 530 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 531 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 532 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 533 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 534 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 535 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 536 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 537 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 538 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 539 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 540 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 541
 542 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 543 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 544 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 545 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 546 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000 /* 256M */
 547 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 548 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 549 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 550 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 551
 552 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 553 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 554 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 555 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc30000000ull
 556 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 557 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 558 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 559 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 560 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 561
 562 /* controller 4, Base address 203000 */
 563 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
 564 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 565 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc40000000ull
 566 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 567 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 568 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 569 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 570
 571 #ifdef CONFIG_PCI
 572 #define CONFIG_PCI_INDIRECT_BRIDGE
 573 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 574 #endif
 575
 576 /* Qman/Bman */
 577 #ifndef CONFIG_NOBQFMAN
 578 #define CONFIG_SYS_BMAN_NUM_PORTALS     18
 579 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 580 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 581 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 582 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 583 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 584 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 585 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 586 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 587                                         CONFIG_SYS_BMAN_CENA_SIZE)
 588 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 589 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 590 #define CONFIG_SYS_QMAN_NUM_PORTALS     18
 591 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 592 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 593 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 594 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 595 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 596 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 597 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 598 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 599                                         CONFIG_SYS_QMAN_CENA_SIZE)
 600 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 601 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 602
 603 #define CONFIG_SYS_DPAA_FMAN
 604 #define CONFIG_SYS_DPAA_PME
 605 #define CONFIG_SYS_PMAN
 606 #define CONFIG_SYS_DPAA_DCE
 607 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
 608 #define CONFIG_SYS_INTERLAKEN
 609
 610 /* Default address of microcode for the Linux Fman driver */
 611 #if defined(CONFIG_SPIFLASH)
 612 /*
 613  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 614  * env, so we got 0x110000.
 615  */
 616 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 617 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 618 #elif defined(CONFIG_SDCARD)
 619 /*
 620  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 621  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 622  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 623  */
 624 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 625 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 626 #elif defined(CONFIG_NAND)
 627 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 628 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 629 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 630 /*
 631  * Slave has no ucode locally, it can fetch this from remote. When implementing
 632  * in two corenet boards, slave's ucode could be stored in master's memory
 633  * space, the address can be mapped from slave TLB->slave LAW->
 634  * slave SRIO or PCIE outbound window->master inbound window->
 635  * master LAW->the ucode address in master's memory space.
 636  */
 637 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 638 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 639 #else
 640 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 641 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 642 #endif
 643 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 644 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 645 #endif /* CONFIG_NOBQFMAN */
 646
 647 #ifdef CONFIG_SYS_DPAA_FMAN
 648 #define CONFIG_FMAN_ENET
 649 #define CONFIG_PHYLIB_10G
 650 #define CONFIG_PHY_VITESSE
 651 #define CONFIG_PHY_REALTEK
 652 #define CONFIG_PHY_TERANETICS
 653 #define RGMII_PHY1_ADDR 0x1
 654 #define RGMII_PHY2_ADDR 0x2
 655 #define FM1_10GEC1_PHY_ADDR       0x3
 656 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 657 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 658 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 659 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 660 #endif
 661
 662 #ifdef CONFIG_FMAN_ENET
 663 #define CONFIG_MII              /* MII PHY management */
 664 #define CONFIG_ETHPRIME         "FM1@DTSEC3"
 665 #endif
 666
 667 /*
 668  * SATA
 669  */
 670 #ifdef CONFIG_FSL_SATA_V2
 671 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 672 #define CONFIG_SATA1
 673 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 674 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 675 #define CONFIG_SATA2
 676 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 677 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 678 #define CONFIG_LBA48
 679 #endif
 680
 681 /*
 682  * USB
 683  */
 684 #ifdef CONFIG_USB_EHCI_HCD
 685 #define CONFIG_USB_EHCI_FSL
 686 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 687 #define CONFIG_HAS_FSL_DR_USB
 688 #endif
 689
 690 /*
 691  * SDHC
 692  */
 693 #ifdef CONFIG_MMC
 694 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 695 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 696 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 697 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 698 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 699 #endif
 700
 701 /*
 702  * Dynamic MTD Partition support with mtdparts
 703  */
 704 #ifdef CONFIG_MTD_NOR_FLASH
 705 #define CONFIG_MTD_DEVICE
 706 #define CONFIG_MTD_PARTITIONS
 707 #define CONFIG_FLASH_CFI_MTD
 708 #endif
 709
 710 /*
 711  * Environment
 712  */
 713 #define CONFIG_LOADS_ECHO       /* echo on for serial download */
 714 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 715
 716 /*
 717  * Miscellaneous configurable options
 718  */
 719 #define CONFIG_SYS_LOAD_ADDR    0x2000000 /* default load address */
 720
 721 /*
 722  * For booting Linux, the board info and command line data
 723  * have to be in the first 64 MB of memory, since this is
 724  * the maximum mapped by the Linux kernel during initialization.
 725  */
 726 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 727 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 728
 729 #ifdef CONFIG_CMD_KGDB
 730 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 731 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 732 #endif
 733
 734 /*
 735  * Environment Configuration
 736  */
 737 #define CONFIG_ROOTPATH  "/opt/nfsroot"
 738 #define CONFIG_BOOTFILE  "uImage"
 739 #define CONFIG_UBOOTPATH "u-boot.bin"   /* U-Boot image on TFTP server */
 740
 741 /* default location for tftp and bootm */
 742 #define CONFIG_LOADADDR         1000000
 743 #define __USB_PHY_TYPE          utmi
 744
 745 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 746         "hwconfig=fsl_ddr:"                                     \
 747         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 748         "bank_intlv=auto;"                                      \
 749         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 750         "netdev=eth0\0"                                         \
 751         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 752         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 753         "tftpflash=tftpboot $loadaddr $uboot && "               \
 754         "protect off $ubootaddr +$filesize && "                 \
 755         "erase $ubootaddr +$filesize && "                       \
 756         "cp.b $loadaddr $ubootaddr $filesize && "               \
 757         "protect on $ubootaddr +$filesize && "                  \
 758         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 759         "consoledev=ttyS0\0"                                    \
 760         "ramdiskaddr=2000000\0"                                 \
 761         "ramdiskfile=t2080qds/ramdisk.uboot\0"                  \
 762         "fdtaddr=1e00000\0"                                     \
 763         "fdtfile=t2080qds/t2080qds.dtb\0"                       \
 764         "bdev=sda3\0"
 765
 766 /*
 767  * For emulation this causes u-boot to jump to the start of the
 768  * proof point app code automatically
 769  */
 770 #define CONFIG_PROOF_POINTS                             \
 771         "setenv bootargs root=/dev/$bdev rw "           \
 772         "console=$consoledev,$baudrate $othbootargs;"   \
 773         "cpu 1 release 0x29000000 - - -;"               \
 774         "cpu 2 release 0x29000000 - - -;"               \
 775         "cpu 3 release 0x29000000 - - -;"               \
 776         "cpu 4 release 0x29000000 - - -;"               \
 777         "cpu 5 release 0x29000000 - - -;"               \
 778         "cpu 6 release 0x29000000 - - -;"               \
 779         "cpu 7 release 0x29000000 - - -;"               \
 780         "go 0x29000000"
 781
 782 #define CONFIG_HVBOOT                           \
 783         "setenv bootargs config-addr=0x60000000; "      \
 784         "bootm 0x01000000 - 0x00f00000"
 785
 786 #define CONFIG_ALU                              \
 787         "setenv bootargs root=/dev/$bdev rw "           \
 788         "console=$consoledev,$baudrate $othbootargs;"   \
 789         "cpu 1 release 0x01000000 - - -;"               \
 790         "cpu 2 release 0x01000000 - - -;"               \
 791         "cpu 3 release 0x01000000 - - -;"               \
 792         "cpu 4 release 0x01000000 - - -;"               \
 793         "cpu 5 release 0x01000000 - - -;"               \
 794         "cpu 6 release 0x01000000 - - -;"               \
 795         "cpu 7 release 0x01000000 - - -;"               \
 796         "go 0x01000000"
 797
 798 #define CONFIG_LINUX                            \
 799         "setenv bootargs root=/dev/ram rw "             \
 800         "console=$consoledev,$baudrate $othbootargs;"   \
 801         "setenv ramdiskaddr 0x02000000;"                \
 802         "setenv fdtaddr 0x00c00000;"                    \
 803         "setenv loadaddr 0x1000000;"                    \
 804         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 805
 806 #define CONFIG_HDBOOT                                   \
 807         "setenv bootargs root=/dev/$bdev rw "           \
 808         "console=$consoledev,$baudrate $othbootargs;"   \
 809         "tftp $loadaddr $bootfile;"                     \
 810         "tftp $fdtaddr $fdtfile;"                       \
 811         "bootm $loadaddr - $fdtaddr"
 812
 813 #define CONFIG_NFSBOOTCOMMAND                   \
 814         "setenv bootargs root=/dev/nfs rw "     \
 815         "nfsroot=$serverip:$rootpath "          \
 816         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 817         "console=$consoledev,$baudrate $othbootargs;"   \
 818         "tftp $loadaddr $bootfile;"             \
 819         "tftp $fdtaddr $fdtfile;"               \
 820         "bootm $loadaddr - $fdtaddr"
 821
 822 #define CONFIG_RAMBOOTCOMMAND                           \
 823         "setenv bootargs root=/dev/ram rw "             \
 824         "console=$consoledev,$baudrate $othbootargs;"   \
 825         "tftp $ramdiskaddr $ramdiskfile;"               \
 826         "tftp $loadaddr $bootfile;"                     \
 827         "tftp $fdtaddr $fdtfile;"                       \
 828         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 829
 830 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 831
 832 #include <asm/fsl_secure_boot.h>
 833
 834 #endif  /* __T208xQDS_H */