git.sur5r.net Git - u-boot/blob - include/configs/adp-ae3xx.h

   1 /*
   2  * Copyright (C) 2011 Andes Technology Corporation
   3  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
   4  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch-ae3xx/ae3xx.h>
  13
  14 /*
  15  * CPU and Board Configuration Options
  16  */
  17 #define CONFIG_USE_INTERRUPT
  18
  19 #define CONFIG_SKIP_LOWLEVEL_INIT
  20
  21 #define CONFIG_SKIP_TRUNOFF_WATCHDOG
  22
  23 #define CONFIG_CMDLINE_EDITING
  24
  25 #define CONFIG_ARCH_MAP_SYSMEM
  26
  27 #define CONFIG_BOOTP_SEND_HOSTNAME
  28 #define CONFIG_BOOTP_SERVERIP
  29
  30 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
  31 #ifdef CONFIG_OF_CONTROL
  32 #undef CONFIG_OF_SEPARATE
  33 #define CONFIG_OF_EMBED
  34 #endif
  35 #endif
  36
  37 /*
  38  * Timer
  39  */
  40 #define CONFIG_SYS_CLK_FREQ     39062500
  41 #define VERSION_CLOCK           CONFIG_SYS_CLK_FREQ
  42
  43 /*
  44  * Use Externel CLOCK or PCLK
  45  */
  46 #undef CONFIG_FTRTC010_EXTCLK
  47
  48 #ifndef CONFIG_FTRTC010_EXTCLK
  49 #define CONFIG_FTRTC010_PCLK
  50 #endif
  51
  52 #ifdef CONFIG_FTRTC010_EXTCLK
  53 #define TIMER_CLOCK     32768                   /* CONFIG_FTRTC010_EXTCLK */
  54 #else
  55 #define TIMER_CLOCK     CONFIG_SYS_HZ           /* CONFIG_FTRTC010_PCLK */
  56 #endif
  57
  58 #define TIMER_LOAD_VAL  0xffffffff
  59
  60 /*
  61  * Real Time Clock
  62  */
  63 #define CONFIG_RTC_FTRTC010
  64
  65 /*
  66  * Real Time Clock Divider
  67  * RTC_DIV_COUNT                        (OSC_CLK/OSC_5MHZ)
  68  */
  69 #define OSC_5MHZ                        (5*1000000)
  70 #define OSC_CLK                         (4*OSC_5MHZ)
  71 #define RTC_DIV_COUNT                   (0.5)   /* Why?? */
  72
  73 /*
  74  * Serial console configuration
  75  */
  76
  77 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
  78 #define CONFIG_CONS_INDEX               1
  79 #define CONFIG_SYS_NS16550_SERIAL
  80 #define CONFIG_SYS_NS16550_COM1         CONFIG_FTUART010_02_BASE
  81 #ifndef CONFIG_DM_SERIAL
  82 #define CONFIG_SYS_NS16550_REG_SIZE     -4
  83 #endif
  84 #define CONFIG_SYS_NS16550_CLK          ((18432000 * 20) / 25)  /* AG101P */
  85
  86 /*
  87  * SD (MMC) controller
  88  */
  89 #define CONFIG_FTSDC010_NUMBER          1
  90 #define CONFIG_FTSDC010_SDIO
  91
  92 /*
  93  * Miscellaneous configurable options
  94  */
  95 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
  96
  97 /*
  98  * Size of malloc() pool
  99  */
 100 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
 101 #define CONFIG_SYS_MALLOC_LEN           (512 << 10)
 102
 103 /*
 104  * Physical Memory Map
 105  */
 106 #define PHYS_SDRAM_0    0x00000000  /* SDRAM Bank #1 */
 107
 108 #define PHYS_SDRAM_1 \
 109         (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
 110
 111 #define CONFIG_NR_DRAM_BANKS    2               /* we have 2 bank of DRAM */
 112
 113 #define PHYS_SDRAM_0_SIZE       0x20000000      /* 512 MB */
 114 #define PHYS_SDRAM_1_SIZE       0x20000000      /* 512 MB */
 115
 116 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_0
 117
 118 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
 119                                         GENERATED_GBL_DATA_SIZE)
 120
 121 /*
 122  * Load address and memory test area should agree with
 123  * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself.
 124  */
 125 #define CONFIG_SYS_LOAD_ADDR            0x300000
 126
 127 /* memtest works on 63 MB in DRAM */
 128 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_0
 129 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_0 + 0x03F00000)
 130
 131 /*
 132  * Static memory controller configuration
 133  */
 134 #define CONFIG_FTSMC020
 135
 136 #ifdef CONFIG_FTSMC020
 137 #include <faraday/ftsmc020.h>
 138
 139 #define CONFIG_SYS_FTSMC020_CONFIGS     {                       \
 140         { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },      \
 141         { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },      \
 142 }
 143
 144 #ifndef CONFIG_SKIP_LOWLEVEL_INIT       /* FLASH is on BANK 0 */
 145 #define FTSMC020_BANK0_LOWLV_CONFIG     (FTSMC020_BANK_ENABLE   |       \
 146                                          FTSMC020_BANK_SIZE_32M |       \
 147                                          FTSMC020_BANK_MBW_32)
 148
 149 #define FTSMC020_BANK0_LOWLV_TIMING     (FTSMC020_TPR_RBE       |       \
 150                                          FTSMC020_TPR_AST(1)    |       \
 151                                          FTSMC020_TPR_CTW(1)    |       \
 152                                          FTSMC020_TPR_ATI(1)    |       \
 153                                          FTSMC020_TPR_AT2(1)    |       \
 154                                          FTSMC020_TPR_WTC(1)    |       \
 155                                          FTSMC020_TPR_AHT(1)    |       \
 156                                          FTSMC020_TPR_TRNA(1))
 157 #endif
 158
 159 /*
 160  * FLASH on ADP_AG101P is connected to BANK0
 161  * Just disalbe the other BANK to avoid detection error.
 162  */
 163 #define FTSMC020_BANK0_CONFIG   (FTSMC020_BANK_ENABLE             |     \
 164                                  FTSMC020_BANK_BASE(PHYS_FLASH_1) |     \
 165                                  FTSMC020_BANK_SIZE_32M           |     \
 166                                  FTSMC020_BANK_MBW_32)
 167
 168 #define FTSMC020_BANK0_TIMING   (FTSMC020_TPR_AST(3)   |        \
 169                                  FTSMC020_TPR_CTW(3)   |        \
 170                                  FTSMC020_TPR_ATI(0xf) |        \
 171                                  FTSMC020_TPR_AT2(3)   |        \
 172                                  FTSMC020_TPR_WTC(3)   |        \
 173                                  FTSMC020_TPR_AHT(3)   |        \
 174                                  FTSMC020_TPR_TRNA(0xf))
 175
 176 #define FTSMC020_BANK1_CONFIG   (0x00)
 177 #define FTSMC020_BANK1_TIMING   (0x00)
 178 #endif /* CONFIG_FTSMC020 */
 179
 180 /*
 181  * FLASH and environment organization
 182  */
 183 /* use CFI framework */
 184 #define CONFIG_SYS_FLASH_CFI
 185 #define CONFIG_FLASH_CFI_DRIVER
 186
 187 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 188 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 189 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
 190
 191 /* support JEDEC */
 192 #ifdef CONFIG_CFI_FLASH
 193 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT       1
 194 #endif
 195
 196 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
 197 #define PHYS_FLASH_1                    0x88000000      /* BANK 0 */
 198 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 199 #define CONFIG_SYS_FLASH_BANKS_LIST     { PHYS_FLASH_1, }
 200 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 201
 202 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* TO for Flash Erase (ms) */
 203 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* TO for Flash Write (ms) */
 204
 205 /* max number of memory banks */
 206 /*
 207  * There are 4 banks supported for this Controller,
 208  * but we have only 1 bank connected to flash on board
 209  */
 210 #ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
 211 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 212 #endif
 213 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
 214
 215 /* max number of sectors on one chip */
 216 #define CONFIG_FLASH_SECTOR_SIZE        (0x10000*2)
 217 #define CONFIG_SYS_MAX_FLASH_SECT       512
 218
 219 /* environments */
 220 #define CONFIG_ENV_SPI_BUS              0
 221 #define CONFIG_ENV_SPI_CS               0
 222 #define CONFIG_ENV_SPI_MAX_HZ           50000000
 223 #define CONFIG_ENV_SPI_MODE             0
 224 #define CONFIG_ENV_SECT_SIZE            0x1000
 225 #define CONFIG_ENV_OFFSET               0x140000
 226 #define CONFIG_ENV_SIZE                 8192
 227 #define CONFIG_ENV_OVERWRITE
 228
 229
 230 /* SPI FLASH */
 231 #define CONFIG_SF_DEFAULT_BUS           0
 232 #define CONFIG_SF_DEFAULT_CS            0
 233 #define CONFIG_SF_DEFAULT_SPEED         1000000
 234 #define CONFIG_SF_DEFAULT_MODE          0
 235
 236 /*
 237  * For booting Linux, the board info and command line data
 238  * have to be in the first 16 MB of memory, since this is
 239  * the maximum mapped by the Linux kernel during initialization.
 240  */
 241
 242 /* Initial Memory map for Linux*/
 243 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)
 244 /* Increase max gunzip size */
 245 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)
 246
 247 #endif  /* __CONFIG_H */