git.sur5r.net Git - u-boot/blob - include/configs/cyrus.h

   1 /*
   2  * Based on corenet_ds.h
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
  11 #error Must call Cyrus CONFIG with a specific CPU enabled.
  12 #endif
  13
  14 #define CONFIG_SDCARD
  15 #define CONFIG_FSL_SATA_V2
  16 #define CONFIG_PCIE3
  17 #define CONFIG_PCIE4
  18 #ifdef CONFIG_ARCH_P5020
  19 #define CONFIG_SYS_FSL_RAID_ENGINE
  20 #define CONFIG_SYS_DPAA_RMAN
  21 #endif
  22 #define CONFIG_SYS_DPAA_PME
  23
  24 /*
  25  * Corenet DS style board configuration file
  26  */
  27 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  28 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  29 #define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg
  30 #if defined(CONFIG_ARCH_P5020)
  31 #define CONFIG_SYS_CLK_FREQ 133000000
  32 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
  33 #elif defined(CONFIG_ARCH_P5040)
  34 #define CONFIG_SYS_CLK_FREQ 100000000
  35 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
  36 #endif
  37
  38 /* High Level Configuration Options */
  39 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  40 #define CONFIG_MP                       /* support multiple processors */
  41
  42 #define CONFIG_SYS_MMC_MAX_DEVICE     1
  43
  44 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  45 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  46 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  47 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  48 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  49 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  50
  51 #define CONFIG_ENV_OVERWRITE
  52
  53 #if defined(CONFIG_SDCARD)
  54 #define CONFIG_SYS_EXTRA_ENV_RELOC
  55 #define CONFIG_FSL_FIXED_MMC_LOCATION
  56 #define CONFIG_SYS_MMC_ENV_DEV          0
  57 #define CONFIG_ENV_SIZE                 0x2000
  58 #define CONFIG_ENV_OFFSET               (512 * 1658)
  59 #endif
  60
  61 /*
  62  * These can be toggled for performance analysis, otherwise use default.
  63  */
  64 #define CONFIG_SYS_CACHE_STASHING
  65 #define CONFIG_BACKSIDE_L2_CACHE
  66 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  67 #define CONFIG_BTB                      /* toggle branch predition */
  68 #define CONFIG_DDR_ECC
  69 #ifdef CONFIG_DDR_ECC
  70 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  71 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  72 #endif
  73
  74 #define CONFIG_ENABLE_36BIT_PHYS
  75
  76 #ifdef CONFIG_PHYS_64BIT
  77 #define CONFIG_ADDR_MAP
  78 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  79 #endif
  80
  81 /* test POST memory test */
  82 #undef CONFIG_POST
  83 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  84 #define CONFIG_SYS_MEMTEST_END          0x00400000
  85 #define CONFIG_SYS_ALT_MEMTEST
  86
  87 /*
  88  *  Config the L3 Cache as L3 SRAM
  89  */
  90 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  91 #ifdef CONFIG_PHYS_64BIT
  92 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
  93 #else
  94 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
  95 #endif
  96 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
  97 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
  98
  99 #ifdef CONFIG_PHYS_64BIT
 100 #define CONFIG_SYS_DCSRBAR              0xf0000000
 101 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 102 #endif
 103
 104 /*
 105  * DDR Setup
 106  */
 107 #define CONFIG_VERY_BIG_RAM
 108 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 109 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 110
 111 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 112 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 113
 114 #define CONFIG_DDR_SPD
 115
 116 #define CONFIG_SYS_SPD_BUS_NUM  1
 117 #define SPD_EEPROM_ADDRESS1     0x51
 118 #define SPD_EEPROM_ADDRESS2     0x52
 119 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 120
 121 /*
 122  * Local Bus Definitions
 123  */
 124
 125 #define CONFIG_SYS_LBC0_BASE            0xe0000000 /* Start of LBC Registers */
 126 #ifdef CONFIG_PHYS_64BIT
 127 #define CONFIG_SYS_LBC0_BASE_PHYS       0xfe0000000ull
 128 #else
 129 #define CONFIG_SYS_LBC0_BASE_PHYS       CONFIG_SYS_LBC0_BASE
 130 #endif
 131
 132 #define CONFIG_SYS_LBC1_BASE            0xe1000000 /* Start of LBC Registers */
 133 #ifdef CONFIG_PHYS_64BIT
 134 #define CONFIG_SYS_LBC1_BASE_PHYS       0xfe1000000ull
 135 #else
 136 #define CONFIG_SYS_LBC1_BASE_PHYS       CONFIG_SYS_LBC1_BASE
 137 #endif
 138
 139 /* Set the local bus clock 1/16 of platform clock */
 140 #define CONFIG_SYS_LBC_LCRR             (LCRR_CLKDIV_16 | LCRR_EADC_1)
 141
 142 #define CONFIG_SYS_BR0_PRELIM \
 143 (BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V)
 144 #define CONFIG_SYS_BR1_PRELIM \
 145 (BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V)
 146
 147 #define CONFIG_SYS_OR0_PRELIM   0xfff00010
 148 #define CONFIG_SYS_OR1_PRELIM   0xfff00010
 149
 150 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 151
 152 #if defined(CONFIG_RAMBOOT_PBL)
 153 #define CONFIG_SYS_RAMBOOT
 154 #endif
 155
 156 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 157 #define CONFIG_MISC_INIT_R
 158
 159 #define CONFIG_HWCONFIG
 160
 161 /* define to use L1 as initial stack */
 162 #define CONFIG_L1_INIT_RAM
 163 #define CONFIG_SYS_INIT_RAM_LOCK
 164 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 165 #ifdef CONFIG_PHYS_64BIT
 166 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 167 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 168 /* The assembler doesn't like typecast */
 169 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 170         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 171           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 172 #else
 173 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 174 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 175 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 176 #endif
 177 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 178
 179 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 180 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 181
 182 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 183 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 184
 185 /* Serial Port - controlled on board with jumper J8
 186  * open - index 2
 187  * shorted - index 1
 188  */
 189 #define CONFIG_CONS_INDEX       1
 190 #define CONFIG_SYS_NS16550_SERIAL
 191 #define CONFIG_SYS_NS16550_REG_SIZE     1
 192 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 193
 194 #define CONFIG_SYS_BAUDRATE_TABLE       \
 195 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 196
 197 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 198 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 199 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 200 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 201
 202 /* I2C */
 203 #define CONFIG_SYS_I2C
 204 #define CONFIG_SYS_I2C_FSL
 205 #define CONFIG_I2C_MULTI_BUS
 206 #define CONFIG_I2C_CMD_TREE
 207 #define CONFIG_SYS_FSL_I2C_SPEED                400000  /* I2C speed and slave address */
 208 #define CONFIG_SYS_FSL_I2C_SLAVE                0x7F
 209 #define CONFIG_SYS_FSL_I2C_OFFSET               0x118000
 210 #define CONFIG_SYS_FSL_I2C2_SPEED               400000  /* I2C speed and slave address */
 211 #define CONFIG_SYS_FSL_I2C2_SLAVE               0x7F
 212 #define CONFIG_SYS_FSL_I2C2_OFFSET              0x118100
 213 #define CONFIG_SYS_FSL_I2C3_SPEED               400000  /* I2C speed and slave address */
 214 #define CONFIG_SYS_FSL_I2C3_SLAVE               0x7F
 215 #define CONFIG_SYS_FSL_I2C3_OFFSET              0x119000
 216 #define CONFIG_SYS_FSL_I2C4_SPEED               400000  /* I2C speed and slave address */
 217 #define CONFIG_SYS_FSL_I2C4_SLAVE               0x7F
 218 #define CONFIG_SYS_FSL_I2C4_OFFSET              0x119100
 219
 220 #define CONFIG_ID_EEPROM
 221 #define CONFIG_SYS_I2C_EEPROM_NXID
 222 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 223 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 224 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 225
 226 #define CONFIG_SYS_I2C_GENERIC_MAC
 227 #define CONFIG_SYS_I2C_MAC1_BUS 3
 228 #define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57
 229 #define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2
 230 #define CONFIG_SYS_I2C_MAC2_BUS 0
 231 #define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
 232 #define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa
 233
 234 #define CONFIG_RTC_MCP79411             1
 235 #define CONFIG_SYS_RTC_BUS_NUM          3
 236 #define CONFIG_SYS_I2C_RTC_ADDR         0x6f
 237
 238 /*
 239  * eSPI - Enhanced SPI
 240  */
 241
 242 /*
 243  * General PCI
 244  * Memory space is mapped 1-1, but I/O space must start from 0.
 245  */
 246
 247 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 248 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 249 #ifdef CONFIG_PHYS_64BIT
 250 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 251 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 252 #else
 253 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 254 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 255 #endif
 256 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 257 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 258 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 259 #ifdef CONFIG_PHYS_64BIT
 260 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 261 #else
 262 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 263 #endif
 264 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 265
 266 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 267 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 268 #ifdef CONFIG_PHYS_64BIT
 269 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 270 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 271 #else
 272 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 273 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 274 #endif
 275 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 276 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 277 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 278 #ifdef CONFIG_PHYS_64BIT
 279 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 280 #else
 281 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 282 #endif
 283 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 284
 285 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 286 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 287 #ifdef CONFIG_PHYS_64BIT
 288 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 289 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 290 #else
 291 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 292 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 293 #endif
 294 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 295 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 296 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 297 #ifdef CONFIG_PHYS_64BIT
 298 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 299 #else
 300 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 301 #endif
 302 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 303
 304 /* controller 4, Base address 203000 */
 305 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 306 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 307 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 308 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 309 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 310 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 311
 312 /* Qman/Bman */
 313 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 314 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 315 #ifdef CONFIG_PHYS_64BIT
 316 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 317 #else
 318 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 319 #endif
 320 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 321 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 322 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 323 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 324 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 325 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 326                                          CONFIG_SYS_BMAN_CENA_SIZE)
 327 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 328 #define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
 329 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 330 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 331 #ifdef CONFIG_PHYS_64BIT
 332 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 333 #else
 334 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 335 #endif
 336 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 337 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 338 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 339 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 340 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 341 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 342                                           CONFIG_SYS_QMAN_CENA_SIZE)
 343 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 344 #define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08
 345
 346 #define CONFIG_SYS_DPAA_FMAN
 347 /* Default address of microcode for the Linux Fman driver */
 348 /*
 349  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 350  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 351  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 352  */
 353 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 354 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 355
 356 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 357 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 358
 359 #ifdef CONFIG_SYS_DPAA_FMAN
 360 #define CONFIG_FMAN_ENET
 361 #endif
 362
 363 #ifdef CONFIG_PCI
 364 #define CONFIG_PCI_INDIRECT_BRIDGE
 365
 366 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 367 #endif  /* CONFIG_PCI */
 368
 369 /* SATA */
 370 #ifdef CONFIG_FSL_SATA_V2
 371 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 372 #define CONFIG_SATA1
 373 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 374 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 375 #define CONFIG_SATA2
 376 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 377 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 378
 379 #define CONFIG_LBA48
 380 #endif
 381
 382 #ifdef CONFIG_FMAN_ENET
 383 #define CONFIG_SYS_TBIPA_VALUE  8
 384 #define CONFIG_MII              /* MII PHY management */
 385 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 386 #endif
 387
 388 /*
 389  * Environment
 390  */
 391 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 392 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 393
 394 /*
 395  * USB
 396  */
 397 #define CONFIG_HAS_FSL_DR_USB
 398 #define CONFIG_HAS_FSL_MPH_USB
 399
 400 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 401 #define CONFIG_USB_EHCI_FSL
 402 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 403 #define CONFIG_EHCI_IS_TDI
 404  /* _VIA_CONTROL_EP  */
 405 #endif
 406
 407 #ifdef CONFIG_MMC
 408 #define CONFIG_FSL_ESDHC
 409 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 410 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 411 #endif
 412
 413 /*
 414  * Miscellaneous configurable options
 415  */
 416 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 417 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 418 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 419 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 420
 421 /*
 422  * For booting Linux, the board info and command line data
 423  * have to be in the first 64 MB of memory, since this is
 424  * the maximum mapped by the Linux kernel during initialization.
 425  */
 426 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 427 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 428
 429 #ifdef CONFIG_CMD_KGDB
 430 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 431 #endif
 432
 433 /*
 434  * Environment Configuration
 435  */
 436 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 437 #define CONFIG_BOOTFILE         "uImage"
 438 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 439
 440 /* default location for tftp and bootm */
 441 #define CONFIG_LOADADDR         1000000
 442
 443 #define __USB_PHY_TYPE  utmi
 444
 445 #define CONFIG_EXTRA_ENV_SETTINGS \
 446 "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 447 "bank_intlv=cs0_cs1;"                                   \
 448 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 449 "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 450 "netdev=eth0\0"                                         \
 451 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 452 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 453 "consoledev=ttyS0\0"                                    \
 454 "ramdiskaddr=2000000\0"                                 \
 455 "fdtaddr=1e00000\0"                                     \
 456 "bdev=sda3\0"
 457
 458 #define CONFIG_HDBOOT                                   \
 459 "setenv bootargs root=/dev/$bdev rw "           \
 460 "console=$consoledev,$baudrate $othbootargs;"   \
 461 "tftp $loadaddr $bootfile;"                     \
 462 "tftp $fdtaddr $fdtfile;"                       \
 463 "bootm $loadaddr - $fdtaddr"
 464
 465 #define CONFIG_NFSBOOTCOMMAND                   \
 466 "setenv bootargs root=/dev/nfs rw "     \
 467 "nfsroot=$serverip:$rootpath "          \
 468 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 469 "console=$consoledev,$baudrate $othbootargs;"   \
 470 "tftp $loadaddr $bootfile;"             \
 471 "tftp $fdtaddr $fdtfile;"               \
 472 "bootm $loadaddr - $fdtaddr"
 473
 474 #define CONFIG_RAMBOOTCOMMAND                           \
 475 "setenv bootargs root=/dev/ram rw "             \
 476 "console=$consoledev,$baudrate $othbootargs;"   \
 477 "tftp $ramdiskaddr $ramdiskfile;"               \
 478 "tftp $loadaddr $bootfile;"                     \
 479 "tftp $fdtaddr $fdtfile;"                       \
 480 "bootm $loadaddr $ramdiskaddr $fdtaddr"
 481
 482 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 483
 484 #include <asm/fsl_secure_boot.h>
 485
 486 #ifdef CONFIG_SECURE_BOOT
 487 #endif
 488
 489 #endif  /* __CONFIG_H */