]> git.sur5r.net Git - u-boot/blob - include/configs/ds109.h
0040fbb427fa5a1ddf5006849135db5ab4218811
[u-boot] / include / configs / ds109.h
1 /*
2  * (C) Copyright 2011
3  * Jason Cooper <u-boot@lakedaemon.net>
4  *
5  * Based on work by:
6  * Marvell Semiconductor <www.marvell.com>
7  * Written-by: Siddarth Gore <gores@marvell.com>
8  *
9  * SPDX-License-Identifier:     GPL-2.0+
10  */
11
12 #ifndef _CONFIG_DS109_H
13 #define _CONFIG_DS109_H
14
15 /* Provide the MACH_TYPE value that the vendor kernel requires. */
16 #define CONFIG_MACH_TYPE                527
17
18 /*
19  * High Level Configuration Options (easy to change)
20  */
21 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
22
23 /*
24  * Commands configuration
25  */
26 #define CONFIG_CMD_EXT2
27
28 /*
29  * mv-plug-common.h should be defined after CMD configs since it used them
30  * to enable certain macros
31  */
32 #include "mv-plug-common.h"
33
34 /*
35  *  Environment variables configurations
36  */
37 #ifdef CONFIG_SPI_FLASH
38 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64k */
39 #endif
40
41 #ifdef CONFIG_CMD_SF
42 #define CONFIG_HARD_SPI                 1
43 #define CONFIG_ENV_SPI_BUS              0
44 #define CONFIG_ENV_SPI_CS               0
45 #define CONFIG_ENV_SPI_MAX_HZ           50000000 /* 50 MHz */
46 #endif
47
48 /*
49  * max 4k env size is enough, but in case of nand
50  * it has to be rounded to sector size
51  */
52 #define CONFIG_ENV_SIZE                 0x10000
53 #define CONFIG_ENV_ADDR                 0x3d0000
54 #define CONFIG_ENV_OFFSET               0x3d0000 /* env starts here */
55
56 /*
57  * Default environment variables
58  */
59 #define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
60         "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
61         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
62         "bootm 0x6400000;"
63
64 #define CONFIG_EXTRA_ENV_SETTINGS       \
65         "x_bootcmd_ethernet=ping 192.168.1.2\0" \
66         "x_bootcmd_usb=usb start\0"     \
67         "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
68         "x_bootargs=console=ttyS0,115200\0"     \
69         "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \
70         "ipaddr=192.168.1.5\0"
71
72 /*
73  * Ethernet Driver configuration
74  */
75 #ifdef CONFIG_CMD_NET
76 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable one port */
77 #define CONFIG_PHY_BASE_ADR     8
78 #endif /* CONFIG_CMD_NET */
79
80 /*
81  * SATA Driver configuration
82  */
83 #ifdef CONFIG_MVSATA_IDE
84 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
85 #endif /*CONFIG_MVSATA_IDE*/
86
87 #endif /* _CONFIG_DS109_H */