git.sur5r.net Git - u-boot/blob - include/configs/km/keymile-common.h

   1 /*
   2  * (C) Copyright 2008-2011
   3  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_KEYMILE_H
   9 #define __CONFIG_KEYMILE_H
  10
  11 #define CONFIG_BOOTCOUNT_LIMIT
  12
  13 #undef  CONFIG_WATCHDOG         /* disable platform specific watchdog */
  14
  15 /*
  16  * Miscellaneous configurable options
  17  */
  18 #define CONFIG_SYS_LONGHELP                     /* undef to save memory   */
  19 #if defined(CONFIG_CMD_KGDB)
  20 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  21 #else
  22 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size  */
  23 #endif
  24 #define CONFIG_SYS_MAXARGS              32 /* max number of command args */
  25 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  26 #define CONFIG_CMDLINE_EDITING
  27 #define CONFIG_AUTO_COMPLETE
  28
  29 #define CONFIG_HUSH_INIT_VAR
  30
  31 #define CONFIG_SYS_ALT_MEMTEST          /* memory test, takes time */
  32
  33 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
  34
  35 #define CONFIG_LOADS_ECHO
  36 #define CONFIG_SYS_LOADS_BAUD_CHANGE
  37
  38
  39 /* Support the IVM EEprom */
  40 #define CONFIG_SYS_IVM_EEPROM_ADR       0x50
  41 #define CONFIG_SYS_IVM_EEPROM_MAX_LEN   0x400
  42 #define CONFIG_SYS_IVM_EEPROM_PAGE_LEN  0x100
  43
  44 #define CONFIG_SYS_FLASH_PROTECTION
  45
  46 /*
  47  * BOOTP options
  48  */
  49 #define CONFIG_BOOTP_BOOTFILESIZE
  50 #define CONFIG_BOOTP_BOOTPATH
  51 #define CONFIG_BOOTP_GATEWAY
  52 #define CONFIG_BOOTP_HOSTNAME
  53
  54 /* UBI Support for all Keymile boards */
  55 #define CONFIG_MTD_PARTITIONS
  56 #define CONFIG_MTD_DEVICE
  57 #define CONFIG_MTD_CONCAT
  58
  59 #ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS
  60 #define CONFIG_KM_DEF_ENV_BOOTPARAMS \
  61         "actual_bank=0\0"
  62 #endif
  63
  64 #ifndef CONFIG_KM_DEF_NETDEV
  65 #define CONFIG_KM_DEF_NETDEV    \
  66         "netdev=eth0\0"
  67 #endif
  68
  69 #ifndef CONFIG_KM_UBI_PARTITION_NAME_BOOT
  70 #define CONFIG_KM_UBI_PARTITION_NAME_BOOT       "ubi0"
  71 #endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */
  72
  73 #ifndef CONFIG_KM_UBI_PART_BOOT_OPTS
  74 #define CONFIG_KM_UBI_PART_BOOT_OPTS            ""
  75 #endif /* CONFIG_KM_UBI_PART_BOOT_OPTS */
  76
  77 #ifndef CONFIG_KM_UBI_PARTITION_NAME_APP
  78 /* one flash chip only called boot */
  79 /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
  80 # define CONFIG_KM_UBI_LINUX_MTD                                        \
  81         "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT                    \
  82         CONFIG_KM_UBI_PART_BOOT_OPTS
  83 # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI                               \
  84         "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0"
  85 #else /* CONFIG_KM_UBI_PARTITION_NAME_APP */
  86 /* two flash chips called boot and app */
  87 /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
  88 /* app:  CONFIG_KM_UBI_PARTITION_NAME_APP */
  89 # define CONFIG_KM_UBI_LINUX_MTD                                        \
  90         "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT                    \
  91         CONFIG_KM_UBI_PART_BOOT_OPTS " "                                \
  92         "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP
  93 # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI                               \
  94         "ubiattach=if test ${boot_bank} -eq 0; then; "                  \
  95         "ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "; else; "        \
  96         "ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0"
  97 #endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
  98
  99 #ifdef CONFIG_NAND_ECC_BCH
 100 #define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0"
 101 #define CONFIG_KM_ECC_MODE    " eccmode=bch"
 102 #else
 103 #define CONFIG_KM_UIMAGE_NAME "uImage\0"
 104 #define CONFIG_KM_ECC_MODE
 105 #endif
 106
 107 /*
 108  * boottargets
 109  * - set 'subbootcmds'
 110  * - set 'bootcmd' and 'altbootcmd'
 111  * available targets:
 112  * - 'release': for a standalone system         kernel/rootfs from flash
 113  */
 114 #define CONFIG_KM_DEF_ENV_BOOTTARGETS                                   \
 115         "subbootcmds=ubiattach ubicopy checkfdt cramfsloadfdt "         \
 116                 "set_fdthigh cramfsloadkernel flashargs add_default "   \
 117                 "addpanic boot\0"                                       \
 118         "develop="                                                      \
 119                 "tftp 200000 scripts/develop-${arch}.txt && "           \
 120                 "env import -t 200000 ${filesize} && "                  \
 121                 "run setup_debug_env\0"                                 \
 122         "ramfs="                                                        \
 123                 "tftp 200000 scripts/ramfs-${arch}.txt && "             \
 124                 "env import -t 200000 ${filesize} && "                  \
 125                 "run setup_debug_env\0"                                 \
 126         ""
 127
 128 /*
 129  * bootargs
 130  * - modify 'bootargs'
 131  *
 132  * - 'add_default': default bootargs common for all arm/ppc boards
 133  * - 'addpanic': add kernel panic options
 134  * - 'flashargs': defaults arguments for flash base boot
 135  *
 136  */
 137 #define CONFIG_KM_DEF_ENV_BOOTARGS                                      \
 138         "add_default="                                                  \
 139                 "setenv bootargs ${bootargs} "                          \
 140                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 141                 ":${hostname}:${netdev}:off:"                           \
 142                 " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}"        \
 143                 " mem=${kernelmem} init=${init}"                        \
 144                 CONFIG_KM_ECC_MODE                                      \
 145                 " phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\
 146                 " " CONFIG_KM_UBI_LINUX_MTD " "                         \
 147                 CONFIG_KM_DEF_BOOT_ARGS_CPU                             \
 148                 "\0"                                                    \
 149         "addpanic="                                                     \
 150                 "setenv bootargs ${bootargs} panic=1 panic_on_oops=1\0" \
 151         "flashargs="                                                    \
 152                 "setenv bootargs "                                      \
 153                 "root=mtdblock:rootfs${boot_bank} "                     \
 154                 "rootfstype=squashfs ro\0"                              \
 155         ""
 156
 157 /*
 158  * flash_boot
 159  * - commands for booting from flash
 160  *
 161  * - 'cramfsloadkernel': copy kernel from a cramfs to ram
 162  * - 'ubiattach': attach ubi partition
 163  * - 'ubicopy': copy ubi volume to ram
 164  *              - volume names: bootfs0, bootfs1, bootfs2, ...
 165  *
 166  * processor specific settings
 167  * - 'cramfsloadfdt': copy fdt from a cramfs to ram
 168  */
 169 #define CONFIG_KM_DEF_ENV_FLASH_BOOT                                    \
 170         "cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0"           \
 171         "cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0"        \
 172         "ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR)           \
 173                         " bootfs${boot_bank}\0"                         \
 174         "uimage=" CONFIG_KM_UIMAGE_NAME                                 \
 175         CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
 176
 177 /*
 178  * constants
 179  * - KM specific constants and commands
 180  *
 181  * - 'default': setup default environment
 182  */
 183 #define CONFIG_KM_DEF_ENV_CONSTANTS                                     \
 184         "backup_bank=0\0"                                               \
 185         "release=run newenv; reset\0"                                   \
 186         "pnvramsize=" __stringify(CONFIG_KM_PNVRAM) "\0"                \
 187         "testbootcmd=setenv boot_bank ${test_bank}; "                   \
 188                 "run ${subbootcmds}; reset\0"                           \
 189         ""
 190
 191 #ifndef CONFIG_KM_DEF_ENV
 192 #define CONFIG_KM_DEF_ENV       \
 193         CONFIG_KM_DEF_ENV_BOOTPARAMS                                    \
 194         CONFIG_KM_DEF_NETDEV                                            \
 195         CONFIG_KM_DEF_ENV_CPU                                           \
 196         CONFIG_KM_DEF_ENV_BOOTTARGETS                                   \
 197         CONFIG_KM_DEF_ENV_BOOTARGS                                      \
 198         CONFIG_KM_DEF_ENV_FLASH_BOOT                                    \
 199         CONFIG_KM_DEF_ENV_CONSTANTS                                     \
 200         "altbootcmd=run bootcmd\0"                                      \
 201         "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0"                   \
 202         "bootcmd=km_checkbidhwk &&  "                                   \
 203                 "setenv bootcmd \'if km_checktestboot; then; "          \
 204                                 "setenv boot_bank ${test_bank}; else; " \
 205                                 "setenv boot_bank ${actual_bank}; fi;"  \
 206                         "run ${subbootcmds}; reset\' && "               \
 207                 "setenv altbootcmd \'setenv boot_bank ${backup_bank}; " \
 208                         "run ${subbootcmds}; reset\' && "               \
 209                 "saveenv && saveenv && boot\0"                          \
 210         "bootlimit=3\0"                                                 \
 211         "cramfsloadfdt="                                                \
 212                 "cramfsload ${fdt_addr_r} "                             \
 213                 "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0"             \
 214         "fdt_addr_r="__stringify(CONFIG_KM_FDT_ADDR) "\0"               \
 215         "init=/sbin/init-overlay.sh\0"                                  \
 216         "load_addr_r="__stringify(CONFIG_KM_KERNEL_ADDR) "\0"           \
 217         "load=tftpboot ${load_addr_r} ${u-boot}\0"                      \
 218         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                                    \
 219         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                                \
 220         ""
 221 #endif /* CONFIG_KM_DEF_ENV */
 222
 223 #endif /* __CONFIG_KEYMILE_H */