git.sur5r.net Git - u-boot/blob - include/configs/lacie_kw.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
   4  */
   5
   6 #ifndef _CONFIG_LACIE_KW_H
   7 #define _CONFIG_LACIE_KW_H
   8
   9 /*
  10  * Machine number definition
  11  */
  12 #if defined(CONFIG_INETSPACE_V2)
  13 #define CONFIG_MACH_TYPE                MACH_TYPE_INETSPACE_V2
  14 #elif defined(CONFIG_NETSPACE_V2)
  15 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_V2
  16 #elif defined(CONFIG_NETSPACE_LITE_V2)
  17 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_LITE_V2
  18 #elif defined(CONFIG_NETSPACE_MINI_V2)
  19 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_MINI_V2
  20 #elif defined(CONFIG_NETSPACE_MAX_V2)
  21 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_MAX_V2
  22 #elif defined(CONFIG_D2NET_V2)
  23 #define CONFIG_MACH_TYPE                MACH_TYPE_D2NET_V2
  24 #elif defined(CONFIG_NET2BIG_V2)
  25 #define CONFIG_MACH_TYPE                MACH_TYPE_NET2BIG_V2
  26 #else
  27 #error "Unknown board"
  28 #endif
  29
  30 /*
  31  * High Level Configuration Options (easy to change)
  32  */
  33 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  34 /* SoC name */
  35 #if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
  36 #define CONFIG_KW88F6192
  37 #else
  38 #define CONFIG_KW88F6281
  39 #endif
  40 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  41
  42 /*
  43  * Commands configuration
  44  */
  45 #ifndef CONFIG_NETSPACE_MINI_V2 /* No USB ports on Network Space v2 Mini */
  46 #endif
  47
  48 /*
  49  * Core clock definition
  50  */
  51 #define CONFIG_SYS_TCLK                 166000000 /* 166MHz */
  52
  53 /*
  54  * SDRAM configuration
  55  */
  56 #define CONFIG_NR_DRAM_BANKS            1
  57
  58 /*
  59  * Different SDRAM configuration and size for some of the boards derived
  60  * from the Network Space v2
  61  */
  62 #if defined(CONFIG_INETSPACE_V2)
  63 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg
  64 #elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
  65 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg
  66 #endif
  67
  68 /*
  69  * mv-common.h should be defined after CMD configs since it used them
  70  * to enable certain macros
  71  */
  72 #include "mv-common.h"
  73
  74 /* Remove or override few declarations from mv-common.h */
  75 #undef CONFIG_ENV_SPI_MAX_HZ
  76 #undef CONFIG_SYS_IDE_MAXBUS
  77 #undef CONFIG_SYS_IDE_MAXDEVICE
  78 #define CONFIG_ENV_SPI_MAX_HZ           20000000 /* 20Mhz */
  79
  80 /*
  81  * Enable platform initialisation via misc_init_r() function
  82  */
  83 #define CONFIG_MISC_INIT_R
  84
  85 /*
  86  * Ethernet Driver configuration
  87  */
  88 #ifdef CONFIG_CMD_NET
  89 #define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  90 #define CONFIG_NETCONSOLE
  91 #endif
  92
  93 /*
  94  * SATA Driver configuration
  95  */
  96 #ifdef CONFIG_MVSATA_IDE
  97 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  98 #if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
  99         defined(CONFIG_NET2BIG_V2)
 100 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
 101 #define CONFIG_SYS_IDE_MAXBUS           2
 102 #define CONFIG_SYS_IDE_MAXDEVICE        2
 103 #else
 104 #define CONFIG_SYS_IDE_MAXBUS           1
 105 #define CONFIG_SYS_IDE_MAXDEVICE        1
 106 #endif
 107 #endif /* CONFIG_MVSATA_IDE */
 108
 109 /*
 110  * Enable GPI0 support
 111  */
 112 #define CONFIG_KIRKWOOD_GPIO
 113
 114 /*
 115  * Enable I2C support
 116  */
 117 #ifdef CONFIG_CMD_I2C
 118 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
 119 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 120 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4 /* 16-byte page size */
 121 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1 /* 8-bit device address */
 122 #if defined(CONFIG_NET2BIG_V2)
 123 #define CONFIG_SYS_I2C_G762_ADDR                0x3e
 124 #endif
 125 #endif /* CONFIG_CMD_I2C */
 126
 127 /*
 128  * Partition support
 129  */
 130
 131 /*
 132  * File systems support
 133  */
 134
 135 /*
 136  * Environment variables configurations
 137  */
 138 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64KB */
 139 #define CONFIG_ENV_SIZE                 0x1000  /* 4KB */
 140 #define CONFIG_ENV_ADDR                 0x70000
 141 #define CONFIG_ENV_OFFSET               0x70000 /* env starts here */
 142
 143 /*
 144  * Default environment variables
 145  */
 146 #define CONFIG_BOOTCOMMAND                                      \
 147         "dhcp && run netconsole; "                              \
 148         "if run usbload || run diskload; then bootm; fi"
 149
 150 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 151         "stdin=serial\0"                                        \
 152         "stdout=serial\0"                                       \
 153         "stderr=serial\0"                                       \
 154         "bootfile=uImage\0"                                     \
 155         "loadaddr=0x800000\0"                                   \
 156         "autoload=no\0"                                         \
 157         "netconsole="                                           \
 158                 "set stdin $stdin,nc; "                         \
 159                 "set stdout $stdout,nc; "                       \
 160                 "set stderr $stderr,nc;\0"                      \
 161         "diskload=ide reset && "                                \
 162                 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0"  \
 163         "usbload=usb start && "                                 \
 164                 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"
 165
 166 #endif /* _CONFIG_LACIE_KW_H */