git.sur5r.net Git - u-boot/blob - include/configs/suvd3.h

   1 /*
   2  * Copyright (C) 2006 Freescale Semiconductor, Inc.
   3  *                    Dave Liu <daveliu@freescale.com>
   4  *
   5  * Copyright (C) 2007 Logic Product Development, Inc.
   6  *                    Peter Barada <peterb@logicpd.com>
   7  *
   8  * Copyright (C) 2007 MontaVista Software, Inc.
   9  *                    Anton Vorontsov <avorontsov@ru.mvista.com>
  10  *
  11  * (C) Copyright 2010
  12  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  13  *
  14  * SPDX-License-Identifier:     GPL-2.0+
  15  */
  16
  17 #ifndef __CONFIG_H
  18 #define __CONFIG_H
  19
  20 /*
  21  * High Level Configuration Options
  22  */
  23
  24 /* This needs to be set prior to including km/km83xx-common.h */
  25 #define CONFIG_SYS_TEXT_BASE    0xF0000000
  26
  27 #if defined(CONFIG_SUVD3)       /* SUVD3 board specific */
  28 #define CONFIG_HOSTNAME         suvd3
  29 #define CONFIG_KM_BOARD_NAME   "suvd3"
  30 /* include common defines/options for all 8321 Keymile boards */
  31 #include "km/km8321-common.h"
  32
  33 #elif defined(CONFIG_KMVECT1)   /* VECT1 board specific */
  34 #define CONFIG_HOSTNAME         kmvect1
  35 #define CONFIG_KM_BOARD_NAME   "kmvect1"
  36 /* at end of uboot partition, before env */
  37 #define CONFIG_SYS_QE_FW_ADDR   0xF00B0000
  38 /* include common defines/options for all 8309 Keymile boards */
  39 #include "km/km8309-common.h"
  40
  41 #elif defined(CONFIG_KMTEGR1)   /* TEGR1 board specific */
  42 #define CONFIG_HOSTNAME   kmtegr1
  43 #define CONFIG_KM_BOARD_NAME   "kmtegr1"
  44 #define CONFIG_KM_UBI_PARTITION_NAME_BOOT       "ubi0"
  45 #define CONFIG_KM_UBI_PARTITION_NAME_APP        "ubi1"
  46
  47 #define CONFIG_ENV_ADDR         0xF0100000
  48 #define CONFIG_ENV_OFFSET       0x100000
  49
  50 #define CONFIG_NAND_ECC_BCH
  51 #define CONFIG_NAND_KMETER1
  52 #define CONFIG_SYS_MAX_NAND_DEVICE              1
  53 #define NAND_MAX_CHIPS                          1
  54
  55 /* include common defines/options for all 8309 Keymile boards */
  56 #include "km/km8309-common.h"
  57 /* must be after the include because KMBEC_FPGA is otherwise undefined */
  58 #define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
  59
  60 #else
  61 #error Supported boards are: SUVD3, KMVECT1, KMTEGR1
  62 #endif
  63
  64 #define CONFIG_SYS_APP1_BASE            0xA0000000
  65 #define CONFIG_SYS_APP1_SIZE            256 /* Megabytes */
  66 #define CONFIG_SYS_APP2_BASE            0xB0000000
  67 #define CONFIG_SYS_APP2_SIZE            256 /* Megabytes */
  68
  69 /* EEprom support */
  70 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
  71
  72 /*
  73  * Init Local Bus Memory Controller:
  74  *
  75  * Bank Bus     Machine PortSz  Size  Device
  76  * ---- ---     ------- ------  -----  ------
  77  *  2   Local   UPMA    16 bit  256MB APP1
  78  *  3   Local   GPCM    16 bit  256MB APP2
  79  *
  80  */
  81
  82 #if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
  83 /*
  84  * APP1 on the local bus CS2
  85  */
  86 #define CONFIG_SYS_LBLAWBAR2_PRELIM     CONFIG_SYS_APP1_BASE
  87 #define CONFIG_SYS_LBLAWAR2_PRELIM      (LBLAWAR_EN | LBLAWAR_256MB)
  88
  89 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_APP1_BASE | \
  90                                  BR_PS_16 | \
  91                                  BR_MS_UPMA | \
  92                                  BR_V)
  93 #define CONFIG_SYS_OR2_PRELIM   (MEG_TO_AM(CONFIG_SYS_APP1_SIZE))
  94
  95 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_APP2_BASE | \
  96                                  BR_PS_16 | \
  97                                  BR_V)
  98
  99 #define CONFIG_SYS_OR3_PRELIM   (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
 100                                  OR_GPCM_CSNT | \
 101                                  OR_GPCM_ACS_DIV4 | \
 102                                  OR_GPCM_SCY_3 | \
 103                                  OR_GPCM_TRLX_SET)
 104
 105 #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \
 106                          0x0000c000 | \
 107                          MxMR_WLFx_2X)
 108
 109 #elif defined(CONFIG_KMTEGR1)
 110 #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
 111                                  BR_PS_16 | \
 112                                  BR_MS_GPCM | \
 113                                  BR_V)
 114
 115 #define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
 116                                  OR_GPCM_SCY_5 | \
 117                                  OR_GPCM_TRLX_CLEAR | \
 118                                  OR_GPCM_EHTR_CLEAR)
 119
 120 #endif /* CONFIG_KMTEGR1 */
 121
 122 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_APP2_BASE
 123 #define CONFIG_SYS_LBLAWAR3_PRELIM      (LBLAWAR_EN | LBLAWAR_256MB)
 124
 125 /*
 126  * MMU Setup
 127  */
 128 #if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
 129 /* APP1:  icache cacheable, but dcache-inhibit and guarded */
 130 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
 131                                  BATL_MEMCOHERENCE)
 132 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \
 133                                  BATU_VS | BATU_VP)
 134 #define CONFIG_SYS_DBAT5L       (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
 135                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 136 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 137
 138 #elif defined(CONFIG_KMTEGR1)
 139 #define CONFIG_SYS_IBAT5L (0)
 140 #define CONFIG_SYS_IBAT5U (0)
 141 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
 142 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
 143 #endif /* CONFIG_KMTEGR1 */
 144
 145 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
 146                                  BATL_MEMCOHERENCE)
 147 #define CONFIG_SYS_IBAT6U       (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \
 148                                  BATU_VS | BATU_VP)
 149 #define CONFIG_SYS_DBAT6L       (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
 150                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 151 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 152
 153 /*
 154  * QE UEC ethernet configuration
 155  */
 156 #if defined(CONFIG_KMVECT1)
 157 #define CONFIG_MV88E6352_SWITCH
 158 #define CONFIG_KM_MVEXTSW_ADDR          0x10
 159
 160 /* ethernet port connected to simple switch 88e6122 (UEC0) */
 161 #define CONFIG_UEC_ETH1
 162 #define CONFIG_SYS_UEC1_UCC_NUM         0       /* UCC1 */
 163 #define CONFIG_SYS_UEC1_RX_CLK          QE_CLK9
 164 #define CONFIG_SYS_UEC1_TX_CLK          QE_CLK10
 165
 166 #define CONFIG_FIXED_PHY                0xFFFFFFFF
 167 #define CONFIG_SYS_FIXED_PHY_ADDR       0x1E    /* unused address */
 168 #define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
 169                 {devnum, speed, duplex}
 170 #define CONFIG_SYS_FIXED_PHY_PORTS \
 171                 CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
 172
 173 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 174 #define CONFIG_SYS_UEC1_PHY_ADDR        CONFIG_SYS_FIXED_PHY_ADDR
 175 #define CONFIG_SYS_UEC1_INTERFACE_TYPE  PHY_INTERFACE_MODE_MII
 176 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 177 #endif /* CONFIG_KMVECT1 */
 178
 179 #if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1)
 180 /* ethernet port connected to piggy (UEC2) */
 181 #define CONFIG_HAS_ETH1
 182 #define CONFIG_UEC_ETH2
 183 #define CONFIG_SYS_UEC2_UCC_NUM         2       /* UCC3 */
 184 #define CONFIG_SYS_UEC2_RX_CLK          QE_CLK_NONE /* not used in RMII Mode */
 185 #define CONFIG_SYS_UEC2_TX_CLK          QE_CLK12
 186 #define CONFIG_SYS_UEC2_ETH_TYPE        FAST_ETH
 187 #define CONFIG_SYS_UEC2_PHY_ADDR        0
 188 #define CONFIG_SYS_UEC2_INTERFACE_TYPE  PHY_INTERFACE_MODE_RMII
 189 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
 190 #endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */
 191
 192 #endif /* __CONFIG_H */