git.sur5r.net Git - u-boot/blob - include/configs/trats2.h

   1 /*
   2  * Copyright (C) 2013 Samsung Electronics
   3  * Sanghee Kim <sh0130.kim@samsung.com>
   4  * Piotr Wilczek <p.wilczek@samsung.com>
   5  *
   6  * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_TRATS2_H
  12 #define __CONFIG_TRATS2_H
  13
  14 #include <configs/exynos4-common.h>
  15
  16 #define CONFIG_TIZEN                    /* TIZEN lib */
  17
  18 #define CONFIG_SYS_L2CACHE_OFF
  19 #ifndef CONFIG_SYS_L2CACHE_OFF
  20 #define CONFIG_SYS_L2_PL310
  21 #define CONFIG_SYS_PL310_BASE   0x10502000
  22 #endif
  23
  24 /* TRATS2 has 4 banks of DRAM */
  25 #define CONFIG_NR_DRAM_BANKS            4
  26 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  27 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  28 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  29 /* memtest works on */
  30 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  31 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
  32 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
  33
  34 /* select serial console configuration */
  35 #define CONFIG_SERIAL2
  36
  37 /* Console configuration */
  38
  39 #define CONFIG_BOOTCOMMAND              "run autoboot"
  40 #define CONFIG_DEFAULT_CONSOLE          "ttySAC2,115200n8"
  41
  42 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  43                                         - GENERATED_GBL_DATA_SIZE)
  44
  45 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
  46
  47 #define CONFIG_SYS_MONITOR_BASE 0x00000000
  48
  49 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
  50 #define CONFIG_ENV_SIZE                 4096
  51 #define CONFIG_ENV_OFFSET               ((32 - 4) << 10) /* 32KiB - 4KiB */
  52
  53 #define CONFIG_ENV_OVERWRITE
  54
  55 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  56 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  57
  58 /* Tizen - partitions definitions */
  59 #define PARTS_CSA               "csa-mmc"
  60 #define PARTS_BOOT              "boot"
  61 #define PARTS_QBOOT             "qboot"
  62 #define PARTS_CSC               "csc"
  63 #define PARTS_ROOT              "platform"
  64 #define PARTS_DATA              "data"
  65 #define PARTS_UMS               "ums"
  66
  67 #define PARTS_DEFAULT \
  68         "uuid_disk=${uuid_gpt_disk};" \
  69         "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
  70         "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
  71         "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
  72         "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
  73         "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
  74         "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
  75         "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
  76
  77 #define CONFIG_DFU_ALT \
  78         "u-boot raw 0x80 0x800;" \
  79         "/uImage ext4 0 2;" \
  80         "/modem.bin ext4 0 2;" \
  81         "/exynos4412-trats2.dtb ext4 0 2;" \
  82         ""PARTS_CSA" part 0 1;" \
  83         ""PARTS_BOOT" part 0 2;" \
  84         ""PARTS_QBOOT" part 0 3;" \
  85         ""PARTS_CSC" part 0 4;" \
  86         ""PARTS_ROOT" part 0 5;" \
  87         ""PARTS_DATA" part 0 6;" \
  88         ""PARTS_UMS" part 0 7;" \
  89         "params.bin raw 0x38 0x8;" \
  90         "/Image.itb ext4 0 2\0"
  91
  92 #define CONFIG_EXTRA_ENV_SETTINGS \
  93         "bootk=" \
  94                 "run loaduimage;" \
  95                 "if run loaddtb; then " \
  96                         "bootm 0x40007FC0 - ${fdtaddr};" \
  97                 "fi;" \
  98                 "bootm 0x40007FC0;\0" \
  99         "updatebackup=" \
 100                 "mmc dev 0 2; mmc write 0x51000000 0 0x800;" \
 101                 " mmc dev 0 0\0" \
 102         "updatebootb=" \
 103                 "mmc read 0x51000000 0x80 0x800; run updatebackup\0" \
 104         "mmcboot=" \
 105                 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 106                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
 107                 "run bootk\0" \
 108         "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
 109         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
 110         "verify=n\0" \
 111         "rootfstype=ext4\0" \
 112         "console=" CONFIG_DEFAULT_CONSOLE "\0" \
 113         "kernelname=uImage\0" \
 114         "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
 115                 "${kernelname}\0" \
 116         "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
 117                 "${fdtfile}\0" \
 118         "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
 119         "mmcbootpart=2\0" \
 120         "mmcrootpart=5\0" \
 121         "opts=always_resume=1\0" \
 122         "partitions=" PARTS_DEFAULT \
 123         "dfu_alt_info=" CONFIG_DFU_ALT \
 124         "uartpath=ap\0" \
 125         "usbpath=ap\0" \
 126         "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
 127         "consoleoff=set console console=ram; save; reset\0" \
 128         "spladdr=0x40000100\0" \
 129         "splsize=0x200\0" \
 130         "splfile=falcon.bin\0" \
 131         "spl_export=" \
 132                    "setexpr spl_imgsize ${splsize} + 8 ;" \
 133                    "setenv spl_imgsize 0x${spl_imgsize};" \
 134                    "setexpr spl_imgaddr ${spladdr} - 8 ;" \
 135                    "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
 136                    "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
 137                    "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 138                    "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
 139                    "spl export atags 0x40007FC0;" \
 140                    "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
 141                    "mw.l ${spl_addr_tmp} ${splsize};" \
 142                    "ext4write mmc ${mmcdev}:${mmcbootpart}" \
 143                    " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
 144                    "setenv spl_imgsize;" \
 145                    "setenv spl_imgaddr;" \
 146                    "setenv spl_addr_tmp;\0" \
 147         CONFIG_EXTRA_ENV_ITB \
 148         "fdtaddr=40800000\0" \
 149
 150 /* GPT */
 151
 152 /* Security subsystem - enable hw_rand() */
 153 #define CONFIG_EXYNOS_ACE_SHA
 154
 155 /* Common misc for Samsung */
 156 #define CONFIG_MISC_COMMON
 157
 158 #define CONFIG_MISC_INIT_R
 159
 160 /* Download menu - Samsung common */
 161 #define CONFIG_LCD_MENU
 162
 163 /* Download menu - definitions for check keys */
 164 #ifndef __ASSEMBLY__
 165
 166 #define KEY_PWR_PMIC_NAME               "MAX77686_PMIC"
 167 #define KEY_PWR_STATUS_REG              MAX77686_REG_PMIC_STATUS1
 168 #define KEY_PWR_STATUS_MASK             (1 << 0)
 169 #define KEY_PWR_INTERRUPT_REG           MAX77686_REG_PMIC_INT1
 170 #define KEY_PWR_INTERRUPT_MASK          (1 << 1)
 171
 172 #define KEY_VOL_UP_GPIO                 EXYNOS4X12_GPIO_X22
 173 #define KEY_VOL_DOWN_GPIO               EXYNOS4X12_GPIO_X33
 174 #endif /* __ASSEMBLY__ */
 175
 176 /* LCD console */
 177 #define LCD_BPP                 LCD_COLOR16
 178
 179 /* LCD */
 180 #define CONFIG_BMP_16BPP
 181 #define CONFIG_FB_ADDR          0x52504000
 182 #define CONFIG_EXYNOS_MIPI_DSIM
 183 #define CONFIG_VIDEO_BMP_GZIP
 184 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
 185
 186 #endif  /* __CONFIG_H */