+commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun May 4 00:35:15 2008 +0200
+
+ drivers/net/tsec.c: Fix typo.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri May 2 21:45:12 2008 -0400
+
+ version_autogenerated.h: use printf rather than echo -n
+
+ Some systems are dumb and do not implement the -n flag to echo (like OS X).
+ Convert the Makefile to use printf as this should work everywhere.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4acc2a108ad0a669165924704a6cb083f9138242
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri May 2 18:17:50 2008 -0400
+
+ fix building when saveenv is disabled in some setups
+
+ If you enable environment in the flash, but disable the embedded
+ option, and you disable the saveenv command, then the #if nested
+ logic will trigger a compile failure:
+ env_flash.c: In function 'env_relocate_spec':
+ env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
+ The fix is to add CMD_SAVEENV ifdef protection like everywhere else.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
+Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
+Date: Fri May 2 16:10:04 2008 -0400
+
+ SBC8548: fix address mask to allow 64M flash
+
+ Fix incorrect mask to enable all 64MB of onboard flash.
+ Previously U-Boot incorrectly mapped only 8MB of flash, this
+ patch correctly maps all the available flash.
+
+ Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
+
+commit 3648085c464c8c22ef76fab006ca4344d3796124
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 2 19:48:56 2008 +0200
+
+ qemu_mips: add README
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6fdd002689190a0022c7b3dbab37fcba724580ce
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri May 2 02:35:59 2008 +0200
+
+ Fix misspelled comment
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu May 1 04:13:05 2008 -0400
+
+ mkimage: make mmap() checks consistent
+
+ The mmap() related code is full of inconsistent casts/constants when
+ it comes to error checking, and may break when building on some
+ systems (like ones that do not implicitly define the caddr_t type).
+ Let's just avoid the whole mess by writing the code nice and clean in
+ the first place.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Thu May 1 09:05:34 2008 +0200
+
+ Fix defined but not used build warning
+
+ - warning: 'srom' defined but not used
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Thu May 1 09:05:26 2008 +0200
+
+ Fix implicit declaration build warnings
+
+ - warning: implicit declaration of function ‘serial_initialize’
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit 9acde129cc3f9c1b3bc11a821480dd446774d618
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Tue Apr 29 19:18:32 2008 +0200
+
+ TSEC: add config options for VSC8601 RGMII PHY
+
+ The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
+ and Tx clock lines. They are configured using 2 bits in extended
+ register 0x17.
+ Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
+ been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+ --
+
+ drivers/net/tsec.c | 6 ++++++
+ drivers/net/tsec.h | 3 +++
+ 2 files changed, 9 insertions(+), 0 deletions(-)
+
+commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 3 23:07:15 2008 +0200
+
+ Revert "ColdFire: Get information from the correct GCC"
+
+ This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
+ (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
+
+commit c4e5f52a58d278eebb87f476e353972c5dacea40
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 3 22:25:00 2008 +0200
+
+ config.mk: use correct (cross) compiler
+
+ Some config.mk files reference $(CC) to test for specific tool chain
+ features, so make sure $(CC) gets set before including any such
+ config files.
+
+ This patch replaces commit b7166e05a5 ("ColdFire: Get information from
+ the correct GCC").
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 27c38689d0cfde0e444239345f97b5eecc9f4067
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu May 1 02:13:44 2008 +0200
+
+ pxa: fix previous definition on cpu init
+
+ start.S:183:1: warning: "ICMR" redefined
+ In file included from start.S:33:
+ include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
+ start.S:187:1: warning: "RCSR" redefined
+ ...
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6d12e697de794d700767f22f950e3026ccf4daf6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu May 1 02:13:43 2008 +0200
+
+ pxa: fix pcmcia operation on 'i' may be undefined
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Apr 30 16:24:35 2008 -0500
+
+ MPC8610HPCD: Drop -O2 from the build flags
+
+ Make the flags use -Os like all other boards
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 30 15:50:39 2008 +0200
+
+ RTC: Fix month offset by one problem in M41T62 RTC driver
+
+ This patch fixes a problem with the month being read and written
+ incorrectly (offset by one). This only gets visible by also using
+ the Linux driver (rtc-m41t80).
+
+ Tested on AMCC Canyonlands.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 141ba1cad8e6598a2466e7e2976c6a12285df619
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat May 3 13:51:44 2008 +0900
+
+ [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
+
+ Current trick to pick up GNU assembler minor version uses a dot(.) as a
+ delimiter, and take the second field to obtain minor version number. But
+ as can be expected, this doesn't work with a version string which has
+ dots more than needs.
+
+ Here's an example:
+
+ $ mips-linux-gnu-as --version | grep 'GNU assembler'
+ GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
+ $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
+ 2-129) 2
+ $
+
+ This patch restricts the version format to 2.XX.XX... This will work
+ in most cases.
+
+ $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
+ 2.18.50.20080215
+ $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
+ 18
+ $
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ea638951acead7f1086c908c0b9f086beab82a22
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat May 3 13:51:28 2008 +0900
+
+ [MIPS] cpu/mips/cache.S: Add dcache_enable
+
+ Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
+ "allow ports to override bootelf behavior") requires ports to have this
+ function.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 1 21:30:16 2008 +0200
+
+ onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts
+
+ Onenand needs a version of memcpy() which performs 16 bit accesses
+ only; make sure the name does not conflict with the standard
+ function.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 12bc4e94251c369c529ffa505cf58b148c372f7f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 30 22:38:17 2008 +0200
+
+ cmd_nand: fix warning: str2long ncompatible pointer type
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Apr 4 11:16:11 2008 -0500
+
+ Fix calculation of I2C clock for some 86xx chips
+
+ Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
+ There is no pattern that can be used to determine which chips use which
+ frequency, so the only way to determine is to look up the actual SOC
+ designation and use the right value for that SOC.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Apr 30 12:11:19 2008 -0500
+
+ ColdFire: Fix ethernet hang issue for mcf547x_8x
+
+ The ethernet hang is caused by receiving buffer in DRAM is not
+ yet ready due to access cycles require longer time in DRAM.
+ Relocate DMA buffer descriptors from DRAM to internal SRAM.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Apr 30 12:10:47 2008 -0500
+
+ ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c
+
+ Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Apr 30 12:10:23 2008 -0500
+
+ ColdFire: Get information from the correct GCC
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
+Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
+Date: Wed Apr 30 18:02:59 2008 +0200
+
+ Fix warning in env_nand.c if compiled for DaVinci Schmoogie
+
+ Fix warnings
+
+ nv_nand.c: In function 'saveenv':
+ env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
+ env_nand.c: In function 'env_relocate_spec':
+ env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type
+
+ if compiled for davinci_schmoogie_config.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+ Ack by: Sergey Kubushyn <ksi@koi8.net>
+
+commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Apr 30 13:34:40 2008 +0200
+
+ Fix warnings while compiling net/net.c for MPC8610HPCD board
+
+ MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
+ causing overriding default -Os option. New gcc (ver. 4.2.2)
+ produces warnings while compiling net/net.c file with -O2
+ option. The patch is an attempt to fix this.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 58b575e575c25fdf8c88141e145db201f3092149
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Wed Apr 30 15:23:38 2008 +0200
+
+ lwmon5: fix offset error in sysmon0 POST
+
+ Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e7419b243a373de4ee042f7d4f45f66de787240d
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Wed Apr 30 15:16:35 2008 +0200
+
+ lwmon5: fix manual merge error in POST
+
+ Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
+
+commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 30 17:46:26 2008 +0200
+
+ cmd_nand.c: fix another 'incompatible pointer type' warning.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit de109d909707e2dfe806be5efc3cdb103b47c8ad
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 30 17:25:07 2008 +0200
+
+ Makefile: fix parallel builds
+
+ This problem shows up with parallel builds only; it results in
+ somewhat cryptic error messages like
+
+ $ JOBS=-j6 MAKEALL netstar
+ Configuring for netstar board...
+ arm-linux-ld: cannot find -lgeneric
+ make[1]: *** [eeprom.srec] Error 1
+
+ A few boards (like netstar and voiceblue) need some libraries for
+ building; however, the board Makefile does not contain any such
+ dependencies which may cause problems with parallel builds. Adding
+ such dependencies is difficult as we would also have to provide build
+ rules, which already exist in the respective library Makefiles.
+
+ To solve this, we make sure that all libraries get built before the
+ board code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 30 14:51:36 2008 +0200
+
+ ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module
+
+ This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
+ used for NAND booting to match the values needed for the new 512MB
+ DIMM modules shipped with the productions boards:
+
+ Crucial: CT6464AC667.8FB
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ea9202a659dc75996facf1475f1866a19a9d3129
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 30 10:49:43 2008 +0200
+
+ ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c
+
+ This patch fixes a problem with DIMMs that have 8 banks. Now the
+ MCIF0_MBxCF register will be setup correctly for this setup too.
+
+ This was noticed with the 512MB DIMM on Canyonlands/Glacier.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 29 23:41:06 2008 +0200
+
+ Prepare v1.3.3-rc2, again.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b7fcc4c13993782342cf5cd20d237a6281648a0b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 29 23:35:24 2008 +0200
+
+ Prepare v1.3.3-rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 29 23:32:20 2008 +0200
+
+ common/env_nand.c: fix one more incompatible pointer type issue
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 29 21:33:08 2008 +0200
+
+ post/board/lwmon5/sysmon.c: fix manual merge error.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 29 12:54:59 2008 -0500
+
+ 85xx: Add -mno-spe to e500/85xx builds
+
+ Newer gcc's might be configured to enable autovectorization by default.
+ If we happen to build with one of those compilers we will get SPE
+ instructions in random code.
+
+ -mno-spe disables the compiler for automatically generating SPE
+ instructions without our knowledge.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 29 10:18:34 2008 -0500
+
+ Update .gitignore for zlib.h
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 45239cf4152109caa925145ccd433529902df887
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 29 10:27:08 2008 -0500
+
+ 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
+
+ All the 85xx and 86xx UM describe the register as timing_cfg_3
+ not as ext_refrec.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ef7d30b14394e4c4a153118f5845760cadada02a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 29 10:28:34 2008 -0500
+
+ 85xx/86xx: Rename DDR init address and init extended address register
+
+ Rename init_addr and init_ext_addr to match the docs between
+ 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit cf6cc014270549684873a5972d2595052c468cb6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Apr 28 02:24:04 2008 -0500
+
+ 85xx: Additional fixes and cleanup of MP code
+
+ * adjust __spin_table alignment to match ePAPR v0.94 spec
+ * loop over all cpus when determing who is up. This fixes an issue if
+ the "boot cpu" isn't core0. The "boot cpu" will already be in the
+ cpu_up_mask so there is no harm
+ * Added some protection in the code to ensure proper behavior. These
+ changes are explicitly needed but don't hurt:
+ - Added eieio to ensure the "hot word" of the table is written after
+ all other table updates have occurred.
+ - Added isync to ensure we don't prefetch loading of table entries
+ until we a released
+
+ These issues we raised by Dave Liu.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b2d527a8b9fb50afccbaf79b5540952585cdc760
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Tue Apr 29 15:06:41 2008 +0200
+
+ lwmon5: minor clean-up to include/configs/lwmon5.h
+
+ LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
+ the CFG_DSPIC_TEST_ADDR definition more readable.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit f4c4d21a885ccc222fd0acdf653b683249e85117
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 16:08:05 2008 +0200
+
+ ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Tue Apr 29 13:32:45 2008 +0200
+
+ ppc flush_cache: add watch-dog triggering into the loops.
+
+ Some boards (e.g. lwmon5) need rather a frequent watch-dog
+ kicking. Since the time it takes for the flush_cache() function
+ to complete its job depends on the size of data being flushed, one
+ may encounter watch-dog resets on such boards when, for example,
+ download big files over ethernet.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit cab99d6f3281ab6784feccf98b9b425daa58418a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 14:44:54 2008 +0200
+
+ ppc4xx: Fix compilation warning in denali_spd_ddr2.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 14:12:07 2008 +0200
+
+ ppc4xx: Fix Katmai CFG_MONITOR_LEN
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 13:57:07 2008 +0200
+
+ ppc4xx: Complete remove bogus dflush()
+
+ Since the current dflush() implementation is know to have some problems
+ (as seem on lwmon5 ECC init) this patch removes it completely and replaces
+ it by using clean_dcache_range().
+
+ Tested on Katmai with ECC DIMM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 13:36:51 2008 +0200
+
+ ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()
+
+ As it seems the "old" ECC initialization routine by using dflush() didn't
+ write all lines in the dcache back to memory on lwmon5. This could lead
+ to ECC error upon Linux booting. This patch changes the program_ecc()
+ routine to now use clean_dcache_range() instead of dflush().
+ clean_dcache_range() uses dcbst which is exactly what we want in this
+ case.
+
+ Since dflush() is known is cause problems, this routine will be
+ removed completely and replaced by clean_dcache_range() with an
+ additional patch.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Apr 28 18:19:34 2008 +0200
+
+ POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
+Author: Markus Brunner <super.firetwister@googlemail.com>
+Date: Mon Apr 28 08:47:47 2008 +0200
+
+ ppc4xx: Fixup ebc clock in FDT for 405GP/EP
+
+ On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
+ and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
+ doesn't exist.
+
+ Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
+
+commit 2ef7503a593c77a80c2a054011970227c4b62774
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Apr 24 07:57:17 2008 +0200
+
+ NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
+
+ Move non-inlied functions into specific drivers file
+ Set get_prom as weak
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Apr 3 17:04:19 2008 +0200
+
+ net: make ARP timeout configurable
+
+ Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
+ On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
+ to the boards get lost, which typically are ARP replies. By configuring
+ the timeout to a lower value we significantly improve the first network
+ transfer time on this board. The timeout is specified in milliseconds,
+ later internally it is converted to deciseconds, because it has to be
+ converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
+ different boards.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Apr 3 13:36:18 2008 +0200
+
+ minor cs8900 driver clean up
+
+ Remove a redundant register definition, clean up some coding style
+ violations.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 22:01:04 2008 +0200
+
+ jffs2_1pass.c: fix incompatible pointer type warning
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Tue Apr 1 10:10:18 2008 +0200
+
+ lwmon5: update dsPIC POST spezification
+
+ The specification for the lwmon5 board dsPIC POST got changed.
+ Also add defines for the temperatures and voltages.
+
+ Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
+
+commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Tue Apr 1 15:13:03 2008 +0200
+
+ Fix watchdog POST for lwmon5
+
+ If the hardware watchdog detects a voltage error, the watchdog sets
+ GPIO62 to low. The watchdog POST has to detect this low level.
+
+ Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit dd5748bcd669f46aeb6686c1b341323843738ccc
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Mon Apr 28 14:37:14 2008 +0200
+
+ rtl8169: fix compiler warnings
+
+ Fix multiple compiler warnings related to argument type mismatch.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Mon Apr 28 14:36:06 2008 +0200
+
+ IDE: fix compiler warnings
+
+ The IDE driver can use 32-bit addresses in LBA mode, in which case it
+ spits multiple warnings during compilation. Fix them.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit db9084de28c46ac81c8f681722cb0d7411be4d7f
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Mon Apr 28 14:35:57 2008 +0200
+
+ LinkStation: fix compiler warning, add a maintainer
+
+ out_8 wants a pointer to an unsigned as the first argument. Add a
+ maintainer for Linkstation boards.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit c71abba3cb67b063f789f17abf6c7447727c0cd5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 14:55:12 2008 +0200
+
+ cmd_nand.c: fix "differ in signedness" problem
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f2c288a35341ad02ac03b1563d786763c9c8f159
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 12:48:47 2008 +0200
+
+ pcnet.c: fix a merge issue
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 12:08:18 2008 +0200
+
+ NAND: fix some strict-aliasing compiler warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Apr 28 11:37:14 2008 +0200
+
+ ppc4xx: Fix compile warning of hcu4 board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 11:31:23 2008 +0200
+
+ MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Mon Apr 28 00:25:32 2008 +0200
+
+ mx31ads: fix loadaddr environment variable define
+
+ Arithmetic expressions do not get evaluated under stringification. Remove
+ default network configuration, add DHCP command support. Thanks to Felix
+ Radensky for reporting.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 144eec777ac07bcb12bd38245a5a289f694a7f98
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 10:55:24 2008 +0200
+
+ katmai: fix section overlap problem
+
+ Since we didn't want to remove features from the configuration, we
+ decided to increase the U-Boot image size (add one flash sector).
+
+ Also changed the default environment definition to make it
+ independent of such changes.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 941d696d25624e3cc65ebf924199541acf52d74e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 10:55:24 2008 +0200
+
+ katmai: fix section overlap problem
+
+ Since we didn't want to remove features from the configuration, we
+ decided to increase the U-Boot image size (add one flash sector).
+
+ Also changed the default environment definition to make it
+ independent of such changes.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Apr 26 11:44:44 2008 -0500
+
+ post: Fix building with O=
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 26 01:55:00 2008 +0200
+
+ Prepare v1.3.3-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 19cf2ec90d8ce52da60c1693693c4048cb810967
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 26 01:25:39 2008 +0200
+
+ post/Makefile: make sure to use the correct flags
+
+ ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
+ messages to be printed.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 26 00:34:42 2008 +0200
+
+ Coding Style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f9204e15173834ff8d123e36279ce49c3c6c74fc
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Apr 20 10:38:12 2008 +0200
+
+ i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
+
+ This patch enables SPI and MC13783/RTC support for the Litekit board.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit f97abbfb47d9e407354e157cae3f6369e460cd37
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Apr 25 01:08:32 2008 -0500
+
+ MPC8544DS: decode pcie3 end-point configuration correctly.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 292188e15523c165c4269403fdcd33c26d89176e
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Apr 25 00:55:09 2008 -0500
+
+ MPC8544DS: Removes the unknown flash message information
+
+ This patch removes the unknown flash message information:
+ '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
+ This unknown flash message is caused by PromJet.
+ Some of the board user is unhappy with this information.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Apr 24 14:07:38 2008 -0500
+
+ mpc83xx: bump loadaddr over fdtaddr to 0x500000
+
+ this seems as a good compromise between human memory, typing,
+ and last but not least, to accommodate for current and future kernel bloat.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Acked-by: Dave Liu <daveliu@freescale.com>
+
+commit be5a7190265a34d968578ff266549c60f6f57654
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Apr 15 13:12:23 2008 +0800
+
+ mpc83xx: clean up the readme for 83xx boards
+
+ 1. correct the typo
+ 2. correct the memory map for 837xerdb board
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Apr 15 13:11:11 2008 +0800
+
+ mpc83xx: remove the unused CPM's stuff
+
+ The MPC83xx family never have CPM block, so remove it from 83xx.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit c63ad6325a8ac0097a54b418a3288926b0484b18
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Apr 18 16:29:40 2008 +0200
+
+ cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
+
+ This patch adds a configurable flash auto protection list that can be used
+ to make U-Boot protect flash regions in flash_init().
+
+ The idea has been discussed on the u-boot mailing list starting
+ on Nov 18th, 2007.
+
+ Even this patch brings a new feature it is used as a bugfix for 4xx
+ platforms where flash_init() does not completely protect the
+ monitor's flash range in all situations.
+
+ U-Boot protects the flash range from CFG_MONITOR_BASE to
+ (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not
+ include the reset vector at 0xfffffffc.
+
+ Example:
+ #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
+
+ This config option will auto protect the last 512k of flash that
+ contains the bootloader on board like APC405 and PMC405.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 25 13:59:03 2008 +0200
+
+ ppc4xx: Remove double defines in lwmon5.h
+
+ introduced with latest lwmon5/POST merge
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7590378fb9c686709492ceb142825cd058255956
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Apr 25 13:54:02 2008 +0200
+
+ Use watchdog-aware functions when calculating hashes of images - take two
+
+ Some files didn't get updated properly with the "Use watchdog-aware
+ functions when calculating hashes of images" commit, this commit
+ fixes this.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8e048c438e20ec89b49da5f085f8f756eba6e587
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Apr 25 12:01:39 2008 +0200
+
+ ppc4xx: Add bootcount limit handling for APC405 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Apr 25 12:10:09 2008 +0200
+
+ Use watchdog-aware functions when calculating hashes of images
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 25 12:44:08 2008 +0200
+
+ USB: fix more GCC 4.2.x aliasing warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 25 12:41:53 2008 +0200
+
+ lib_generic/crc32.c: add missing #include <watchdog.h>
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 25 11:52:21 2008 +0200
+
+ lib_generic/crc32.c: fix compile problem
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 22 12:20:32 2008 +0200
+
+ ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
+
+ The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
+ environment variable will now get passed to the Linux kernel by setting
+ the device_type property of the PCIe device tree node. For normal root-
+ complex configuration it will keep its defaults value of "pci" and for
+ endpoint configuration it will get changed to "pci-endpoint".
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Apr 24 10:30:53 2008 +0200
+
+ lwmon5: watchdog POST fix
+
+ Use the GPT0_MASKx registers as the temporary storage for watch-dog
+ timer POST test instead of GPT0_COMPx. The latter
+ (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Apr 21 18:10:14 2008 -0500
+
+ lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
+
+ This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
+ proven problematic getting right from the start at least on 83xx and
+ 4xx.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a99715b8ebfc500f3f40e01b36b64d473938443d
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Apr 18 14:50:01 2008 +0200
+
+ Realining some header definitions.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 4acbc6c7f993cae409c424615415a3e76820f13d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Apr 24 07:57:16 2008 +0200
+
+ NE2000: coding style cleanup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b4aff1ffaf7120032c653357c007faa14f74d29d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 23 00:11:47 2008 +0900
+
+ qemu-mips.h: Add CFI support
+
+ CONFIG_ENV_OVERWRITE is also added.
+
+ This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Apr 22 22:47:27 2008 +0900
+
+ doc/README.mips: Add MIPS notes
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 215b01bba8bc662d35f72b084700b192d367dfb4
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Apr 22 12:27:56 2008 +0200
+
+ Add support for calculating hashes with watchdog triggering
+
+ Implement watchodg-aware variants of hash calculation functions:
+ - crc32_wd()
+ - md5_wd()
+ - sha1_csum_wd()
+ The above functions calculate the hash of the input buffer in chunks,
+ triggering the watchdog after processing each chunk. The chunk size
+ is given as a function call parameter.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Wed Apr 23 11:02:12 2008 +0900
+
+ qemu-mips: Cleanup whitespace, indentation, etc.
+
+ No functional change.
+
+ This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
+ Then I re-created from scratch, and changed more lines than the original.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Wed Oct 10 23:02:09 2007 +0300
+
+ Fixed pcnet io_base
+
+ Bus and phys address are not always the same
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Apr 24 23:44:26 2008 +0200
+
+ drivers/net/pcnet.c: Coding Style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Wed Oct 10 23:04:23 2007 +0300
+
+ Added Am79C970A chip id to pcnet
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Apr 20 10:35:03 2008 +0200
+
+ i.MX31: Fix architecture numbers for ADS and Litekit boards
+
+ Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit e7ae84d6c7288790e88639f57cb60daf89c11369
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Apr 20 10:36:36 2008 +0200
+
+ i.MX31: Use symbolic names for Litekit membases.
+
+ Use symbolic names instead of hard coded addresses for Litekit membases.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Apr 19 17:59:20 2008 +0200
+
+ Fix show_boot_progress prototype
+
+ in commit fad634071 "make show_boot_progress () weak."
+ show_boot_progress is supposed to be declared as weak but declared as
+ inline instead.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit edbed247a14d70b94958010f736621212285de91
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Apr 18 12:39:23 2008 +0200
+
+ Memory footprint optimizations
+
+ As suggested by Wolfgang Denk:
+ - image printing functions:
+ - remove wrappers
+ - remove indentation prefix from functions' signatures
+ - merge getenv_verify and getenv_autostart into one parametrized function
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Apr 15 13:33:11 2008 +0200
+
+ MX31ADS environment variable update, spi and rtc support
+
+ Update MX31ADS default environment to better match the flash layout and
+ the memory map, support SPI and RTC.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Apr 21 09:28:36 2008 -0500
+
+ 85xx: Round up frequency calculations to get reasonable output
+
+ eg. because of rounding error we can get 799Mhz instead of 800Mhz.
+
+ Introduced DIV_ROUND_UP and roundup taken from linux kernel.
+
+ Signed-off-by: Dejan Minic <minic@freescale.com>
+ Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Apr 23 16:58:04 2008 -0500
+
+ fsl_pci: Only modify registers if we have them
+
+ pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 83fe32334337def160b302aa9d152d808bfcc68e
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Wed Apr 23 10:57:33 2008 +0200
+
+ USB: remove a cpu bug workaround for an unsupported architecture.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit f957576cb53e6cfab412709cfc8db1afd39d21c3
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Wed Apr 23 10:53:23 2008 +0200
+
+ USB: fix those pesky aliasing warnings issued by gcc-4.2
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 89cdab788f3716b335fefb60b836ebcf975aceab
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Mar 31 11:02:01 2008 -0400
+
+ crc32: use uint32_t rather than unsigned long
+
+ The envcrc.c does sizeof(unsigned long) when calculating the crc, but
+ this is done with the build toolchain instead of the target tool
+ chain, so if the build is a 64bit system but the target is 32bits,
+ the size will obviously be wrong. This converts all unsigned long
+ stuff related to crc32 to uint32_t types. Compile tested only: output
+ of ./tools/envcrc when run on a 32bit build system matches that of a
+ 64bit build system.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 80c40b765b3642ddb9f3392b7898715aab44a29c
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Mar 26 09:53:29 2008 +0100
+
+ ARM: Davinci: Fix DM644x timer overflow handling and cleanup
+
+ Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
+
+ Changes:
+
+ - Remove *_masked() functions as noted by Wolfgang
+
+ - Adapt register naming to recent TI spec (sprue26, March 2007)
+
+ - Fix reset_timer() handling
+
+ - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
+
+ [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
+
+ - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
+
+ Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!
+
+ Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+ Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
+
+commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Wed Apr 9 16:09:41 2008 +0200
+
+ Added watchdog triggering calls in the "mtest" test function.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Sun Apr 6 19:19:14 2008 +0200
+
+ lwmon5 watchdog: limit trigger rate
+
+ Limit the rate of h/w watch-dog triggering on the LWMON5 board by
+ the CONFIG_WD_MAX_RATE value.
+
+ Note that an earlier version of this patch which used microseconds
+ instead of ticks dis not work. The problem was that we used
+ usec2ticks() to convert microseconds into ticks. usec2ticks() uses
+ get_tbclk(), which in turn calls get_sys_info(). It turns out that
+ this function does a lot of prolonged operations (like divisions)
+ which take too much time so we do not trigger the watchdog in time,
+ and it resets the system.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 2d2b994a30bb100774dc747ae9865b7f95285a88
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 31 10:51:37 2008 +0200
+
+ POST: move CONFIG_POST to Makefiles
+
+ Introduce the new logical option CONFIG_HAS_POST which is set when the
+ platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
+ to determine should the POST libs be compiled for the selected target
+ platform, or not.
+
+ To avoid breaking u-boot linking process, the empty post/libpost.a file is
+ created for platforms which do not have POSTs.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 31 10:49:34 2008 +0200
+
+ POST: preparations for moving CONFIG_POST to Makefiles
+
+ Remove CONFIG_POST ifdefs from the post/ source files.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 22 14:14:20 2008 +0200
+
+ ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
+
+ This patch fixes the Canyonlands and Glacier default environment to better
+ fit to the arch/powerpc device-tree kernels. The variables dealing with
+ arch/ppc booting are removed, since these boards are supported only in
+ arch/powerpc. Glacier uses the same config file as Canyonlands.
+
+ Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 22 14:06:42 2008 +0200
+
+ ppc4xx: Small coding style cleanup for the latest esd patches
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 79941d63bc03aed8c48d7602f18217cc200ee931
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 18:01:07 2008 +0200
+
+ ppc4xx: Update CPU strapping for PMC440 boards
+
+ This patch removes the temporary 'test' strapping option
+ of the sbe command. The '667' strapping option now uses
+ a PLB/PCI divider of 3.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit f00cf3193a6635355b121e90debb2f54e777e7da
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:42:21 2008 +0200
+
+ ppc4xx: Remove unused APC405 strataflash driver
+
+ The APC405 board support has been migrated to use the common
+ CFI flash driver.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 1c686676a86473bbd92151f0544e109413f6ed06
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:42:17 2008 +0200
+
+ ppc4xx: Update APC405 configuration
+
+ - enable esd's auto_update mechanism
+ - support alternative flash layout on rev. 1.8 boards
+ - update default environment
+ - use common CFI flash driver
+ - coding style cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 0b9872515a521bf7866dc24b85ddce708e60d702
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:42:11 2008 +0200
+
+ ppc4xx: Update APC405 board support
+
+ - enable esd's auto_update mechanism
+ - fix LCD support on latest hardware revision (uses other LCD controller)
+ - support alternative flash layout on rev. 1.8 boards
+ - coding style cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 83975d02e225e231960784972e7820a8b303756b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:42:06 2008 +0200
+
+ ppc4xx: update esd's common auto_update code for 405 boards
+
+ - Coding style cleanup (long lines)
+ - improve handling of protected flash regions
+ - remove dead code
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit b9233fe5d59cb25d975071616bd1035d6f4c2285
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:41:59 2008 +0200
+
+ ppc4xx: Update esd's common LCD code for 405 boards
+
+ - Coding style cleanup (long lines)
+ - Add s1d13505 support
+ - Make some functions return a result code instead of void
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit dea68189424c3f1242427a8146a3861bf093173c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 11:36:55 2008 +0200
+
+ ppc4xx: Update FPGA image for APC405 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 2a05b152924acfcec3b037693329e517e6d3578f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 11:36:08 2008 +0200
+
+ ppc4xx: Update bootlogo for APC405 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 18 16:41:31 2008 +0200
+
+ ppc4xx: Add dcache_enable() for 440
+
+ dcache_enable() was missing for 440 and the patch
+ 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
+ "] behavior uses this function.
+
+ Note: Currently the cache handling functions like
+ d/icache_disable/enable() are NOP's on 440. This may be changed in the
+ future.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a49e0d177a0749614b316ec847fb623f09c82c07
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 11:19:04 2008 +0200
+
+ video: Add missing free for logo memory
+
+ This patch adds two missing free()s.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
+Author: Troy Kisky <troy.kisky@boundarydevices.com>
+Date: Mon Sep 24 16:41:43 2007 -0700
+
+ PATCH - Fix oob data copied into supplied buffer
+
+ This patch correctly sets the oobavail variable
+ and fixes a bug where the oob data was not valid when
+ there where multiple groups in oobfree.
+
+ First segment fixes a typo
+ Second segment fixes a bug where oob data may be copied incorrectly.
+ Third segment adds an error message when exiting due to write protect.
+ Forth segment fixes a bug where oobavail may be set incorrectly.
+
+ Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
+
+commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Apr 18 17:24:32 2008 +0200
+
+ ppc4xx: Fix sys_get_info() for 405GP(r)
+
+ This patch assigns the correct EBC clock for 405GP(r) CPUs
+ to PPC4xx_SYS_INFO structure. Without this patch U-Boot
+ uses an uninitialized EBC clock in its startup message.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 20 15:39:38 2008 -0700
+
+ Makefile: remove nand_spl/System.map when cleaning up.
+
+commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 20 15:35:52 2008 -0700
+
+ MAKEALL: sort entries / lists.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0878af169b181868a105b5c33f3a6423e2c9fd60
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Apr 18 11:29:01 2008 -0500
+
+ 85xx: Fix size of cpu-release-addr property
+
+ The cpu-release-addr is defined as always being a 64-bit quanity regardless
+ if we are running on a 32-bit or 64-bit machine.
+
+commit 88353a985109562a639b2f8a0c90d77011bfe374
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Apr 4 11:15:58 2008 -0500
+
+ Fix calculation of I2C clock for some 85xx chips
+
+ Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and
+ some use CCB/3. There is no pattern that can be used to determine which
+ chips use which frequency, so the only way to determine is to look up the
+ actual SOC designation and use the right value for that SOC.
+
+ Update immap_85xx.h to include the GUTS PORDEVSR2 register.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 18 11:44:27 2008 -0700
+
+ Fix build breakage casued by commit c0559be371b2
+
+ Change env_get_char from a global function ptr to a function.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 18 10:53:41 2008 -0700
+
+ Coding Style cleanup, update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
Author: Mike Frysinger <vapier@gentoo.org>
Date: Tue Apr 8 14:00:57 2008 -0400
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 8 10:33:29 2008 +0200
+
+ ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 8 10:33:28 2008 +0200
+
+ ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 8 10:33:27 2008 +0200
+
+ ppc4xx: Add Glacier NAND booting target
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 46f373838e384a4c23d13581b1dfa5acb66b5810
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 8 10:31:00 2008 +0200
+
+ nand_spl: Update nand_spl to support 2k page size NAND devices
+
+ This patch adds support for booting from 2k page sized NAND device
+ (e.g. Micron 29F2G08AAC).
+
+ Tested on AMCC Canyonlands.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
Author: Anatolij Gustschin <agust@denx.de>
Date: Thu Apr 17 18:18:00 2008 +0200
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+commit 3a5d1e7f1309998791702b2a559e3126781746b9
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:33:30 2008 +0100
+
+ lwmon5: Fix register test logic to match the specific GDC h/w.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:27:57 2008 +0100
+
+ Fix backlight in the lwmon5 POST.
+
+ Backlight was switcehd on even when temperature was too low.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Wed Feb 6 18:48:36 2008 +0100
+
+ The patch introduces the alternative configuration of the log buffer for
+ the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
+ the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
+ PPC440EPX_GPT0_COMP5).
+
+ To enable this, alternative, configuration the U-Boot board configuration
+ file for lwmon5 includes the definitions of alternative addresses for header
+ (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
+
+ The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
+ and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
+ lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit ff818b21b069f4bc9cb73373cc5a16014be101b7
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:11:53 2008 +0100
+
+ Add support for the lwmon5 board reset via GPIO58.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:09:55 2008 +0100
+
+ Some fixes to dspic, fpga, and gdc post tests for lwmon5.
+ Disable external watch-dog for now.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit e262efe35742c1ad4b0966ff501efc26f34a0aec
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:11:03 2008 +0100
+
+ The patch introduces the CRITICAL feature of POST tests. If the test
+ marked as POST_CRITICAL fails then the alternative, post_critical,
+ boot-command is used. If this command is not defined then U-Boot
+ enters into interactive mode.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 65b20dcefc89618193fa51947968dada91e4c778
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:42 2008 +0100
+
+ The patch adds new POST tests for the Lwmon5 board.
+ These are:
+
+ * External Watchdog test;
+ * dsPIC tests;
+ * FPGA test;
+ * GDC test;
+ * Sysmon tests.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:01 2008 +0100
+
+ Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+
commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
Author: Wolfgang Denk <wd@denx.de>
Date: Tue Mar 18 17:35:51 2008 +0100
projects / u-boot / blobdiff