#
VERSION = 2009
-PATCHLEVEL = 08
+PATCHLEVEL = 11
SUBLEVEL =
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
LIBS += drivers/qe/qe.a
LIBS += cpu/mpc8xxx/ddr/libddr.a
LIBS += cpu/mpc8xxx/lib8xxx.a
-TAG_SUBDIRS += cpu/mpc8xxx
endif
ifeq ($(CPU),mpc86xx)
LIBS += cpu/mpc8xxx/ddr/libddr.a
LIBS += cpu/mpc8xxx/lib8xxx.a
-TAG_SUBDIRS += cpu/mpc8xxx
endif
LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
LIBS += drivers/usb/gadget/libusb_gadget.a
LIBS += drivers/usb/host/libusb_host.a
LIBS += drivers/usb/musb/libusb_musb.a
+LIBS += drivers/usb/phy/libusb_phy.a
LIBS += drivers/video/libvideo.a
LIBS += drivers/watchdog/libwatchdog.a
LIBS += common/libcommon.a
ifeq ($(CONFIG_ONENAND_U_BOOT),y)
ONENAND_IPL = onenand_ipl
U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
+ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
endif
__OBJS := $(subst $(obj),,$(OBJS))
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
+$(obj)u-boot.kwb: $(obj)u-boot.bin
+ $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
+ -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
+
$(obj)u-boot.sha1: $(obj)u-boot.bin
$(obj)tools/ubsha1 $(obj)u-boot.bin
$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin
- cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
- cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin
+ cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
$(VERSION_FILE):
@( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
+TAG_SUBDIRS = $(SUBDIRS)
+TAG_SUBDIRS += $(dir $(__LIBS))
TAG_SUBDIRS += include
-TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
-TAG_SUBDIRS += cpu/$(CPU)
-TAG_SUBDIRS += lib_$(ARCH)
-TAG_SUBDIRS += fs/cramfs
-TAG_SUBDIRS += fs/fat
-TAG_SUBDIRS += fs/fdos
-TAG_SUBDIRS += fs/jffs2
-TAG_SUBDIRS += fs/yaffs2
-TAG_SUBDIRS += net
-TAG_SUBDIRS += disk
-TAG_SUBDIRS += common
-TAG_SUBDIRS += drivers/bios_emulator
-TAG_SUBDIRS += drivers/block
-TAG_SUBDIRS += drivers/gpio
-TAG_SUBDIRS += drivers/hwmon
-TAG_SUBDIRS += drivers/i2c
-TAG_SUBDIRS += drivers/input
-TAG_SUBDIRS += drivers/misc
-TAG_SUBDIRS += drivers/mmc
-TAG_SUBDIRS += drivers/mtd
-TAG_SUBDIRS += drivers/mtd/nand
-TAG_SUBDIRS += drivers/mtd/onenand
-TAG_SUBDIRS += drivers/mtd/spi
-TAG_SUBDIRS += drivers/net
-TAG_SUBDIRS += drivers/net/sk98lin
-TAG_SUBDIRS += drivers/pci
-TAG_SUBDIRS += drivers/pcmcia
-TAG_SUBDIRS += drivers/qe
-TAG_SUBDIRS += drivers/rtc
-TAG_SUBDIRS += drivers/serial
-TAG_SUBDIRS += drivers/spi
-TAG_SUBDIRS += drivers/usb
-TAG_SUBDIRS += drivers/video
tags ctags:
- ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
- -name '*.[ch]' -print`
+ ctags -w -o $(obj)ctags `find $(TAG_SUBDIRS) \
+ -name '*.[chS]' -print`
etags:
- etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
- -name '*.[ch]' -print`
+ etags -a -o $(obj)etags `find $(TAG_SUBDIRS) \
+ -name '*.[chS]' -print`
cscope:
- find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \
- > cscope.files
+ find $(TAG_SUBDIRS) -name '*.[chS]' -print > cscope.files
cscope -b -q -k
SYSTEM_MAP = \
$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
+%: %_config
+ $(MAKE)
+
#========================================================================
# PowerPC
#========================================================================
inka4x0_config: unconfig
@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
+ipek01_config: unconfig
+ @$(MKCONFIG) -a ipek01 ppc mpc5xxx ipek01
+
lite5200b_config \
lite5200b_PM_config \
lite5200b_LOWBOOT_config: unconfig
CMS700_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
-# Compact-Center & DevCon-Center use different U-Boot images
-compactcenter_config \
-devconcenter_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
- tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a compactcenter ppc ppc4xx compactcenter gdsys
-
CPCI2DP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
HUB405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
+# Compact-Center(codename intip) & DevCon-Center use different U-Boot images
+intip_config \
+devconcenter_config: unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
+ tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys
+
JSE_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
sbc8349_config \
sbc8349_PCI_33_config \
sbc8349_PCI_66_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _PCI_,$@)" ] ; then \
- $(XECHO) -n "... PCI HOST at " ; \
- echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
- fi ; \
- if [ "$(findstring _33_,$@)" ] ; then \
- $(XECHO) -n "33MHz... " ; \
- echo "#define PCI_33M" >>$(obj)include/config.h ; \
- fi ; \
- if [ "$(findstring _66_,$@)" ] ; then \
- $(XECHO) -n "66MHz... " ; \
- echo "#define PCI_66M" >>$(obj)include/config.h ; \
- fi ;
- @$(MKCONFIG) -a sbc8349 ppc mpc83xx sbc8349
+ @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
SIMPC8313_LP_config \
SIMPC8313_SP_config: unconfig
ATUM8548_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
+MPC8536DS_NAND_config \
+MPC8536DS_SDCARD_config \
+MPC8536DS_SPIFLASH_config \
MPC8536DS_36BIT_config \
MPC8536DS_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -a MPC8536DS ppc mpc85xx mpc8536ds freescale
+ @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
MPC8540ADS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
MPC8572DS_36BIT_config \
MPC8572DS_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _36BIT_,$@)" ] ; then \
- echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
- $(XECHO) "... enabling 36-bit physical addressing." ; \
- fi
- @$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale
+ @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale
P2020DS_36BIT_config \
P2020DS_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _36BIT_,$@)" ] ; then \
- echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
- $(XECHO) "... enabling 36-bit physical addressing." ; \
- fi
- @$(MKCONFIG) -a P2020DS ppc mpc85xx p2020ds freescale
-
-P1011RDB_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_P1011" >>$(obj)include/config.h ;
- @$(MKCONFIG) -a P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
-
-P1020RDB_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_P1020" >>$(obj)include/config.h ;
- @$(MKCONFIG) -a P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
-
-P2010RDB_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_P2010" >>$(obj)include/config.h ;
- @$(MKCONFIG) -a P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
-
-P2020RDB_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_P2020" >>$(obj)include/config.h ;
- @$(MKCONFIG) -a P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
+ @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale
+
+P1011RDB_config \
+P1011RDB_NAND_config \
+P1011RDB_SDCARD_config \
+P1011RDB_SPIFLASH_config \
+P1020RDB_config \
+P1020RDB_NAND_config \
+P1020RDB_SDCARD_config \
+P1020RDB_SPIFLASH_config \
+P2010RDB_config \
+P2010RDB_NAND_config \
+P2010RDB_SDCARD_config \
+P2010RDB_SPIFLASH_config \
+P2020RDB_config \
+P2020RDB_NAND_config \
+P2020RDB_SDCARD_config \
+P2020RDB_SPIFLASH_config: unconfig
+ @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
PM854_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
sbc8540_config \
sbc8540_33_config \
sbc8540_66_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _66_,$@)" ] ; then \
- echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
- $(XECHO) "... 66 MHz PCI" ; \
- else \
- $(XECHO) "... 33 MHz PCI" ; \
- fi
- @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
+ @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560
-sbc8548_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548
+sbc8548_config \
+sbc8548_PCI_33_config \
+sbc8548_PCI_66_config \
+sbc8548_PCI_33_PCIE_config \
+sbc8548_PCI_66_PCIE_config: unconfig
+ @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _66_,$@)" ] ; then \
- echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
- $(XECHO) "... 66 MHz PCI" ; \
- else \
- $(XECHO) "... 33 MHz PCI" ; \
- fi
- @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
+ @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560
socrates_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
## ARM92xT Systems
#########################################################################
+a320evb_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320
+
#########################################################################
## Atmel AT91RM9200 Systems
#########################################################################
cmc_pu2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
+CPUAT91_RAM_config \
+CPUAT91_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
+ @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
+
csb637_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
fi;
@$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
+CPU9G20_128M_config \
+CPU9G20_config \
+CPU9260_128M_config \
+CPU9260_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
+ @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
+
meesc_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
pm9263_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
+SBC35_A9G20_NANDFLASH_config \
+SBC35_A9G20_EEPROM_config \
+SBC35_A9G20_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
+ @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
+
+TNY_A9G20_NANDFLASH_config \
+TNY_A9G20_EEPROM_config \
+TNY_A9G20_config \
+TNY_A9260_NANDFLASH_config \
+TNY_A9260_EEPROM_config \
+TNY_A9260_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
+ @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
+
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
integratorap_config \
cp1026_config: unconfig
@board/armltd/integrator/split_by_variant.sh cp $@
+da830evm_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs da830evm davinci davinci
+
davinci_dvevm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
davinci_dm355evm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
+davinci_dm355leopard_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
+
+davinci_dm365evm_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
+
+davinci_dm6467evm_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
+
+imx27lite_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
+
lpd7a400_config \
lpd7a404_config: unconfig
@$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
@$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
omap1510inn_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
+ @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
$(XECHO) "... configured for CS3 boot"; \
fi;
- @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
+ @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
omap5912osk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
+
+openrd_base_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
$(XECHO) "... configured for CS3 boot"; \
fi;
- @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
+ @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
rd6281a_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
}
@$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
+tx25_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
VCMA9_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
## ARM CORTEX Systems
#########################################################################
+devkit8000_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
+
omap3_beagle_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
omap3_overo_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo omap3 omap3
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3
omap3_evm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm omap3 omap3
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
omap3_pandora_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora omap3 omap3
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
+
+omap3_sdp3430_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3
omap3_zoom1_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
omap3_zoom2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 omap3 omap3
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
+
+smdkc100_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
#########################################################################
## XScale Systems
apollon_config : unconfig
@mkdir -p $(obj)include
- @mkdir -p $(obj)onenand_ipl/board/apollon
@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
imx31_litekit_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
+ @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
imx31_phycore_eet_config \
imx31_phycore_config : unconfig
@$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
omap2420h4_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
+ @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
qong_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
@mkdir -p $(obj)include
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
-suzaku_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
-
#========================================================================
# Blackfin
#========================================================================
$(BFIN_BOARDS:%=%_config) : unconfig
@$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
-$(BFIN_BOARDS):
- $(MAKE) $@_config
- $(MAKE)
-
#========================================================================
# AVR32
#========================================================================
clean:
@rm -f $(obj)examples/standalone/82559_eeprom \
+ $(obj)examples/standalone/atmel_df_pow2 \
$(obj)examples/standalone/eepro100_eeprom \
$(obj)examples/standalone/hello_world \
$(obj)examples/standalone/interrupt \
$(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
- @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
+ @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
+ @rm -f $(ONENAND_BIN)
@rm -f $(obj)onenand_ipl/u-boot.lds
@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
@find $(OBJTREE) -type f \
@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
+ @rm -f $(obj)u-boot.kwb
@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
@rm -f $(obj)cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
projects / u-boot / blobdiff